3.5 to 5.

0 ton Gasoline and Diesel Engine Lift Trucks

ISO 9001 Quality Management System ISO 14001 Environmental Management System
(for Komatsu Utility Tochigi Plant) (for Komatsu Utility Tochigi Plant)

For other options and attachments,please consult with your Komatsu dealer.
Features and specifications may vary in different countries and regions.
Please contact your Komatsu dealer to confirm machine details in your region.
Forklift trucks in this catalog may be shown with optional equipment.
Komatsu products and specifications are subject to change without notice.
The performance values indicated herein represent nominal values obtained under typical Certified by Lloyd's Register Quality Assurance Limited.
operating conditions.

Head office: 2-4-1, Shiba-koen, Minato-ku,Tokyo 105-0011, Japan

URL: http://www.komatsu-utility.com
Fax: +81-3-3433-3120
Form No. BR-CX-006-ENG
Printed in Japan 0907-1-03Shi
Courtesy of Crane.Market
 Powerful
TOTAL PRODUCTIVITY
The CX Series Lineup
Efficient
Tough
THE MOVER
Nicknamed "the Mover," CX Series
Standard Models forklift trucks were designed with a
These models are designed for broad-ranging, general-purpose applications.
Their rated capacities are designed based on a 600mm load center.
mission-meeting the needs of
Gasoline Diesel
professional operators with
Rated Capacity Load Center maximum productivity and
Powershift Manual Powershift Manual
3.5-ton 600 mm FG35T-7 ––– FD35T-7 FD35W-7 efficiency. "The Mover" is
4.0-ton 600 mm FG40T-7 ––– FD40T-7 FD40W-7 ideal for transporting large
4.5-ton 600 mm FG45T-7 ––– FD45T-7 FD45W-7 loads and performing heavy
5.0-ton 600 mm FG50AT-7 ––– FD50AT-7 –––
Load center: The distance between the center of gravity of the load and the vertical front face of the forks
operations efficiently for
extended periods.
Compact Models
These models are designed specifically for operating in confined spaces,
such as inside shipping containers and within the holds of ships.
Their rated capacities are designed based on a 500mm load center.

Gasoline Diesel
Rated Capacity Load Center
Powershift Manual Powershift Manual
3.5-ton 500 mm FG35ZT-7 ––– FD35ZT-8 –––
4.0-ton 500 mm FG40ZT-7 ––– FD40ZT-8 –––
Load center: The distance between the center of gravity of the load and the vertical front face of the forks

For a 5-ton machine capable of moving large loads,

this model is designed to be compact. As a result, it
can work inside shipping containers, within the holds
of ships or in other confined places.

FG(D)50AT

2 Features and equipment may vary depending on market. Photographs in this catalog may contain optional equipment. Please consult with your KOMATSU dealer. 3
Courtesy of Crane.Market
 M aximum Productivity through Excellent Pow er,
Response and Handling

Hydraulics
The smooth and pow erful
hydraulic pow er steering
system is based on Komatsu's
extensive hydraulics expertise.

Pow er steering cylinder

Hydraulics pump
A tandem pump is employed to
provide optimal hydraulic flow .

Steering angle
feedback link
KAPS uses a unique feedback link
to avoid deviation of the steering
position, w hic h is a troublesome
problem that occurs w ith the FHPS.

Diesel-engine Advanced Steering System for

Highly Efficient M ovement
KOM ATSU 6D102E
Compact Models S6D102E
The CX Series employs Komatsu' s
unique new pow er steering system,
KAPS. Featuring better durability and
Rated output 70kW @2,150rpm more direct pow er transmission, KAPS
makes steering c ontrol lighter. As a
Displacement 5,880cm3 result, handling is sharper and more
precise, despite bumps.

Pow erful and Clean Engines

CX Series machines are available w ith
either diesel or gasoline engines, both
of w hic h are pow erful and c lean-
Brake booster M aster cylinder burning, but feature low noise and
Pedal
vibration levels that surpass EU and
N or th A mer ic an envir onmental
guidelines.

Gasoline-engine Brakes
Excellent Braking Performance
A high-capacity braking system allow s
NISSAN TB42 [Brake Booster]
CX Series machines to stop quickly and
prec isely, c ontributing to overall
Rated output 62.5kW @2,100rpm produc tivity. The braking system is
smooth and reliable, ensuring smooth,
Displacement 4,169cm3 easy operation under all types of site
conditions.

4 5
Courtesy of Crane.Market
 Highly Rigid, Durable Components
for Reliable Operations Every Day

Environment Designed to
Maximize Operator Efficiency

Highly Rigid Mast and Frame Outstanding Front/Rear Visibility

Contributing to overall reliability, CX Series for Higher Operating Efficiency
machines employ a highly rigid mast and Rounded machine contours and a view-
frame. The cross-sectional area of the through mast design allow the operator to
mast rails has been increased, as has easily see to the back of the machine or the
frame strength, which improves load- front, including the fork tips. Superb
handling stability. As a result, heavy loads front/rear visibility helps operators work
can be moved safely and dependably. more productively and confidently.

Excellent Reliability even in Smooth and Vibrationless for

Severe Conditions Improved Concentration
A large-capacity cooling system, A smooth and vibrationless operator station
thoughtful piping design and an easy- means that operators are better able to
maintenance inline filter help guarantee concentrate on the task at hand. CX Series
machines assure operator comfort with a
that CX Series machine performance is deluxe operator seat offering adjustable seat
consistently reliable even under the most suspension, as well as full-floating cab
severe operating conditions. mounts.

Operating System for Working

Efficiently, Rapidly and Dependably
All levers and pedals are arranged to raise
operating efficiency. All frequently used
levers are integrated into the main console. Cab frame Rubber bushing Mount Chassis
Oversized floor pedals are angled to improve
ease of operation, and the roller-mounted
accelerator pedal ensures subtle speed
control.

6 7
Courtesy of Crane.Market
 Specifications
Standard Models
1.2 Model Manufacturer's Designation FG35T-7 FD35T-7 FD35W-7 FG40T-7 FD40T-7 FD40W-7 FG45T-7 FD45T-7 FD45W-7 FG50AT-7 FD50AT-7 1.2
1.3 Power Type Electric, Diesel, Gasoline, LPG, Cable Gasoline Diesel Gasoline Diesel Gasoline Diesel Gasoline Diesel 1.3
Characteristics

Characteristics
1.4 Operation Type Pedestrian, Driver Standing, Sitting, Order Picking Sitting Sitting Sitting Sitting 1.4
1.5 Rated Capacity Q Rated Capacity kg 3500 4000 4500 5000 1.5
1.6 Load Center c Load Center mm 600 600 600 600 1.6
1.6.1 Alternative Capacity Q2 Capacity @ 500mm Load Center kg 4000 4500 5000 5000 1.6.1
1.8 Load Distance x Front Axle Center to Fork Face mm 570 575 585 575 1.8
1.9 Wheelbase y mm 2000 2000 2000 2000 2200 1.9
2.1 Service Weight kg 5645 5835 5775 6070 6260 6200 6625 6815 6755 7240 7005 2.1
2.2 Front kg 8070 8165 8120 8830 8925 8880 9855 9950 9905 10820 10705 2.2
Weight

Weight
Loaded
2.2.1 Rear kg 1075 1170 1155 1240 1335 1320 1270 1365 1350 1420 1300 2.2.1
Axle Loading
2.3 Front kg 2520 2615 2570 2480 2575 2530 2690 2785 2740 2880 3035 2.3
Unloaded
2.3.1 Rear kg 3125 3220 3205 3590 3685 3670 3935 4030 4015 4360 3970 2.3.1
3.1 Tyre Type Pneumatic Pneumatic Pneumatic Pneumatic 3.1
3.2 Front 8.25-15-12PR(I) 300-15-18PR(I) 300-15-18PR(I) 300-15-18PR(I) 3.2
Tyre Size
3.3 Rear 7.00-12-12PR(I) 7.00-12-12PR(I) 7.00-12-12PR(I) 7.00-12-14PR(I) 7.00-12-12PR(I) 3.3
Tyre

Tyre
3.5 Number of Wheel Front/Rear(x=driven) 2x/2 2x/2 2x/2 2x/2 3.5
3.6 Tread, Front b10 mm 1115 1150 1150 1150 3.6
3.7 Tread, Rear b11 mm 1120 1120 1120 1120 3.7
4.1 Tilting Angle α/β Forward/Backward degree 6/12 6/12 6/12 6/12 4.1
4.2 Mast Height, Lowered h1 with Std. Mast mm 2105 2105 2205 2205 4.2
4.3 Std. Free Lift h2 with Std. Mast from Ground mm 150 155 140 145 4.3
4.4 Std. Lift Height h3 with Std. Mast from Ground mm 3000 3000 3000 3000 4.4
4.5 Mast Height, Extended h4 with Std. Mast mm 4130 4130 4130 4345 4.5
Basic Measurement

Basic Measurement
4.7 Height, Overhead Guard h6 mm 2240 2240 2240 2240 4.7
4.19 Length, with Std. Forks l1 mm 4150 4215 4265 4435 4605 4.19
4.20 Length, to Fork Face l2 mm 3080 3145 3195 3215 3385 4.20
4.21 Width, at Tyre b1 mm 1350 1450 1450 1450 4.21
4.22 Forks s/e/l Thickness/Width/Length mm 50 x 150 x 1070 55 x 150 x 1070 55 x 150 x 1070 55 x 150 x 1220 4.22
4.23 Fork Carriage Class ISO 2328, Type A/B/no Class III, Type A Class III, Type A Class III, Type A Class IV, Type A 4.23
4.24 Width, Fork Carriage b3 mm 1190 1190 1190 1270 4.24
4.31 m1 Under the Mast mm 145 145 145 145 4.31
Ground Clearance
4.32 m2 at the Center of Wheelbase mm 230 230 230 230 4.32
4.33 Ast with L1000 x W1200 pallet mm 4500 4545 4605 4625 4825 4.33
Right Angle Stacking Aisle
4.34 Ast with L1200 x W800 pallet mm 4700 4745 4805 4825 5005 4.34
4.35 Turning Radius Wa mm 2730 2770 2820 2850 3050 4.35
5.1 Loaded 1st/2nd km/h 18.5 8.5/18.5 18.5 8.5/18.5 15.5/23.0 8.5/18.5 15.5/23.0 5.1
Travel Speed (FWD)
5.1.1 Unloaded 1st/2nd km/h 19.5 9.0/19.5 19.5 9.0/19.5 16.5/24.0 9.0/19.5 16.5/24.0 5.1.1
5.2 Lifting Speed Loaded/Unloaded mm/s 450/480 530/570 450/480 530/570 390/410 460/490 390/410 460/490 5.2
Performance

Performance
5.3 Lowering Speed Loaded/Unloaded mm/s 480/550 480/550 480/550 480/550 450/520 450/520 450/520 450/520 5.3
5.6 Max. Drawbar Pull *1.5km/h, 3min rating kN 24.3* 27.6* 27 24.3* 27.6* 27 28.6* 32.6* 27 28.6* 32.6* 5.6
5.8 Max. Gradeability *1.5km/h, 3min rating % 27.7* 31.2* 25 24.9* 28.1* 25 26.7* 30.2* 21 25.0* 28.4* 5.8
5.10 Service Brake Operation/Control Foot/Hydraulic Foot/Hydraulic Foot/Hydraulic Foot/Hydraulic 5.10
5.11 Parking Brake Operation/Control Hand/Mechanical Hand/Mechanical Hand/Mechanical Hand/Mechanical 5.11
5.12 Steering Hydraulic Power Steering Hydraulic Power Steering Hydraulic Power Steering Hydraulic Power Steering 5.12
6.4 Battery Voltage/Capacity at 5-hour rating V/Ah 12/48 24/56 12/48 24/56 12/48 24/56 12/48 24/56 6.4
7.1 Make/Model NISSAN/TB42 KOMATSU/6D102E-1 NISSAN/TB42 KOMATSU/6D102E-1 NISSAN/TB42 KOMATSU/6D102E-1 NISSAN/TB42 KOMATSU/6D102E-1 7.1

Drive
7.2 Rated Output,SAE gross kW 62.5 69.9 62.5 69.9 62.5 69.9 62.5 69.9 7.2
Drive

7.3 Rated Speed rpm 2100 2150 2100 2150 2100 2150 2100 2150 7.3
7.3.1 Max. Torque, SAE gross [email protected] 275@1900 309@1500 275@1900 309@1500 275@1900 309@1500 275@1900 309@1500 7.3.1
7.4 No. of Cylinder /Displacement cm3 6/4169 6/5880 6/4169 6/5880 6/4169 6/5880 6/4169 6/5880 7.4
7.6 Fuel Tank Capacity Ltr 100 100 100 100 7.6
8.2 Relief Pressure for Attachment bar 181 181 181 181 8.2
Others

Others
8.2.1 Hydraulic Tank Capacity Ltr 55 55 55 55 8.2.1
8.6 Clutch Torque Converter Wet(Oil) Clutch Torque Converter Wet(Oil) Clutch Torque Converter Wet(Oil) Clutch Torque Converter 8.6
8.7 Transmission TORQFLOW Synchromesh TORQFLOW Synchromesh TORQFLOW Synchromesh TORQFLOW 8.7

e
CAPACITY CHART STANDARD EQUIPMENT APPLICABLE FRONT TYRE SIZE
• 3.0m two-stage free-view mast • Load backrest • Forks • Overhead guard FG(D)35
• Deluxe operator's seat • Tiltable steering column Front tyre Single SDFT DFT
5000 FG(D)45 • Komatsu Advanced Power Steering System (KAPS) • Headlights Front tyre size 8.25-15-12PR(I) 8.25-15-12PR(I) 7.50-16-12PR(I)
b1 b3 b10 b11 • Turn signal lamps • Stop and tail lamps • Backup lamps • Electric horn Overall Width (mm) 1350 1890 1750
4500 FG(D)40 • Neutral safety start system • Engine key stop (Diesel) • Operating lamp Front Tread (mm) 1115 1385 1285
• Hourmeter • Fuel gauge • Water temperature gauge
Capacity (kg)

4000 FG(D)35 • Torque converter oil temperature gauge (TORQFLOW type)

3500 • Engine oil pressure warning lamp • Brake oil level warning lamp FG(D)40
Wa • Charge warning lamp • Sedimenter warning lamp (Diesel) Front tyre Single SDFT DFT
3000 • Alternator with IC regulator • Cyclonic air cleaner with high position air intake Front tyre size 300-15-18PR(I) 8.25-15-12PR(I) 7.50-16-12PR(I)
• Automatic choke (Gasoline) • Pre-combustion air heating system (Diesel) Overall Width (mm) 1450 1890 1750
2500 • Fully transistorized ignition system (Gasoline) Front Tread (mm) 1150 1385 1285
• Transmission line filter (TORQFLOW type)
2000
• Wet (oil) clutch for manual transmission models
500 600 800 1000 1200 1400 1500 • Torque converter oil cooler (TORQFLOW type) • Hydraulic oil cooler FG(D)45
α β • Drawbar pin
Load Center (mm) Front tyre Single SDFT DFT
Front tyre size 300-15-18PR(I) 8.25-15-12PR(I) 7.50-16-12PR(I)

h4
5000 OPTIONS Overall Width (mm) 1450 1890 1750
• Special length forks • Extension forks • Backup buzzer Front Tread (mm) 1150 1385 1285
4500 FG(D)50AT • Rear working light • Rear-view mirror • Exhaust gas purifier
h3
• Spark arrestor • Upward exhaust pipe • Overload warning buzzer
Capacity (kg)

h6 4000
h1 • Load indicator FG(D)50AT
3500 Front tyre Single SDFT DFT
h2 Front tyre size 300-15-18PR(I) 8.25-15-12PR(I) 7.50-16-12PR(I)
s ATTACHMENTS Overall Width (mm) 1450 1890 1750
3000 • Side shifter • Fork positioner • Rotating forks • Fork clamp
Front Tread (mm) 1150 1385 1285
• Block clamp • Bale clamp • Roll clamp • Multipurpose clamp
2500
• Hinged forks • Manipulator
m1 m2
x y 2000
500 600 800 1000 1200 1400 1500 There are more options and attachments.
l l2
Load Center (mm) Features and specifications may vary in different countries and regions.
l1 Please contact your KOMATSU dealer to confirm machine details in your region.

8 9
Courtesy of Crane.Market
 Specifications
Compact Models
1.2 Model Manufacturer's Designation FG35ZT-7 FD35ZT-8 FG40ZT-7 FD40ZT-8 1.2
1.3 Power Type Electric, Diesel, Gasoline, LPG, Cable Gasoline Diesel Gasoline Diesel 1.3
Characteristics

Characteristics
1.4 Operation Type Pedestrian, Driver Standing, Sitting, Order Picking Sitting Sitting 1.4
1.5 Rated Capacity Q Rated Capacity kg 3500 4000 1.5
1.6 Load Center c Load Center mm 500 500 1.6
1.6.1 Alternative Capacity Q2 Capacity @ 600mm Load Center kg 3250 3500 1.6.1
1.8 Load Distance x Front Axle Center to Fork Face mm 530 530 1.8
1.9 Wheelbase y mm 1800 1830 1800 1830 1.9
2.1 Service Weight kg 5260 5430 5580 5750 2.1
2.2 Front kg 7795 7850 8505 8555 2.2
Weight

Weight
Loaded
2.2.1 Rear kg 965 1080 1075 1195 2.2.1
Axle Loading
2.3 Front kg 2290 2380 2215 2295 2.3
Unloaded
2.3.1 Rear kg 2970 3050 3365 3455 2.3.1
3.1 Tyre Type Pneumatic Pneumatic 3.1
3.2 Front 250-15-16PR(I) 250-15-16PR(I) 3.2
Tyre Size
3.3 Rear 7.00-12-12PR(I) 7.00-12-12PR(I) 3.3
Tyre

Tyre
3.5 Number of Wheel Front/Rear(x=driven) 2x/2 2x/2 3.5
3.6 Tread, Front b10 mm 1115 1115 3.6
3.7 Tread, Rear b11 mm 1120 1120 3.7
4.1 Tilting Angle α/β Forward/Backward degree 6/12 6/12 4.1
4.2 Mast Height, Lowered h1 with Std. Mast mm 2100 2100 4.2
4.3 Std. Free Lift h2 with Std. Mast from Ground mm 150 150 4.3
4.4 Std. Lift Height h3 with Std. Mast from Ground mm 3000 3000 4.4
4.5 Mast Height, Extended h4 with Std. Mast mm 4130 4130 4.5
Basic Measurement

Basic Measurement
4.7 Height, Overhead Guard h6 mm 2150 2190 2150 2190 4.7
4.19 Length, with Std. Forks l1 mm 3970 4020 4.19
4.20 Length, to Fork Face l2 mm 2900 2950 4.20
4.21 Width, at Tyre b1 mm 1350 1350 4.21
4.22 Forks s/e/l Thickness/Width/Length mm 50 x 150 x 1070 50 x 150 x 1070 4.22
4.23 Fork Carriage Class ISO 2328, Type A/B/no Class III, Type A Class III, Type A 4.23
4.24 Width, Fork Carriage b3 mm 1190 1190 4.24
4.31 m1 Under the Mast mm 140 140 4.31
Ground Clearance
4.32 m2 at the Center of Wheelbase mm 175 185 175 185 4.32
4.33 Ast with L1000 x W1200 pallet mm 4260 4310 4.33
Right Angle Stickling Aisle
4.34 Ast with L1200 x W800 pallet mm 4460 4510 4.34
4.35 Turning Radius Wa mm 2530 2580 4.35
5.1 Loaded 1st/2nd km/h 18.5 18.5 5.1
Travel Speed (FWD)
5.1.1 Unloaded 1st/2nd km/h 19.5 19.5 5.1.1
5.2 Lifting Speed Loaded/Unloaded mm/s 450/480 530/570 450/480 530/570 5.2
Performance

Performance
5.3 Lowering Speed Loaded/Unloaded mm/s 480/550 480/550 5.3
5.6 Max. Drawbar Pull *1.5km/h, 3min rating kN 24.7* 28.1* 24.7* 28.1* 5.6
5.8 Max. Gradeability *1.5km/h, 3min rating % 30.3* 34.1* 28.3* 31.8* 5.8
5.10 Service Brake Operation/Control Foot/Hydraulic Foot/Hydraulic 5.10
5.11 Parking Brake Operation/Control Hand/Mechanical Hand/Mechanical 5.11
5.12 Steering Hydraulic Power Steering Hydraulic Power Steering 5.12
6.4 Battery Voltage/Capacity at 5-hour rating V/Ah 12/48 24/56 12/48 24/56 6.4
7.1 Make/Model NISSAN/TB42 KOMATSU/S6D102E-1 NISSAN/TB42 KOMATSU/S6D102E-1 7.1
7.2 Rated Output,SAE gross kW 62.5 71.0 62.5 71.0 7.2
Drive

Drive
7.3 Rated Speed rpm 2100 2150 2100 2150 7.3
7.3.1 Max. Torque, SAE gross [email protected] 275@1900 372@1000 275@1900 372@1000 7.3.1
7.4 No. of Cylinder /Displacement cm3 6/4169 6/5880 6/4169 6/5880 7.4
7.6 Fuel Tank Capacity Ltr 80 90 80 90 7.6
8.2 Relief Pressure for Attachment bar 181 181 8.2
Others

Others
8.2.1 Hydraulic Tank Capacity Ltr 55 55 8.2.1
8.6 Clutch Torque Converter Torque Converter 8.6
8.7 Transmission TORQFLOW TORQFLOW 8.7

e CAPACITY CHART STANDARD EQUIPMENT APPLICABLE FRONT TYRE SIZE

• 3.0m two-stage free-view mast • Load backrest • Forks • Overhead guard FG(D)35Z
• Deluxe operator's seat • Tiltable steering column Front tyre Single DFT
4000 • Komatsu Advanced Power Steering System (KAPS) • Headlights
FG(D)40Z Front tyre size 250-15-16PR(I) 7.00-15-10PR(I)
3500 • Turn signal lamps • Stop and tail lamps • Backup lamps • Electric horn
b1 b3 b10 b11 Overall Width (mm) 1350 1735
• Neutral safety start system • Engine key stop (Diesel) • Operating lamp Front Tread (mm) 1115 1300
• Hourmeter • Fuel gauge • Water temperature gauge
Capacity (kg)

2970 FG(D)35Z
• Torque converter oil temperature gauge (TORQFLOW type)
2580 • Engine oil pressure warning lamp • Brake oil level warning lamp FG(D)40Z
Wa • Charge warning lamp • Sedimenter warning lamp (Diesel) Front tyre Single DFT
2290 • Alternator with IC regulator • Cyclonic air cleaner with high position air intake Front tyre size 250-15-16PR(I) 7.00-15-10PR(I)
2000 • Automatic choke (Gasoline) • Pre-combustion air heating system (Diesel) Overall Width (mm) 1350 1735
• Fully transistorized ignition system (Gasoline) Front Tread (mm) 1115 1300
• Transmission line filter (TORQFLOW type)
• Wet (oil) clutch for manual transmission models
500 600 800 1000 1200 1500 • Torque converter oil cooler (TORQFLOW type) • Hydraulic oil cooler
α β • Drawbar pin
Load Center (mm)

OPTIONS
h4 • Special length forks • Extension forks • Backup buzzer
• Rear working light • Rear-view mirror • Exhaust gas purifier
h3 • Spark arrestor • Upward exhaust pipe • Overload warning buzzer
h6 • Load indicator
h1
h2 s ATTACHMENTS
• Side shifter • Fork positioner • Rotating forks • Fork clamp
• Block clamp • Bale clamp • Roll clamp • Multipurpose clamp
• Hinged forks • Manipulator
m1 m2
x y
l l2 There are more options and attachments.
Features and specifications may vary in different countries and regions.
l1 Please contact your KOMATSU dealer to confirm machine details in your region.

10 11
Courtesy of Crane.Market
Powered by TCPDF (www.tcpdf.org)