ENGINEERED FILTRATION

FILTER CARTRIDGE CATALOG

PROCESS TECHNOLOGIES
2 PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES
 TABLE OF CONTENTS
PUREFLEX
PUREFLEX SERIES PF - 200 AB & PFN - 200................ .6
PUREFLEX MEGA SERIES PF - 600 AB............................8
PUREFLEX SERIES HEPP................................................10

TRIFLEX
TRIFLEX SERIES GF - 200AB & GFN - 200.....................12
TRIFLEX MEGA SERIES GF - 600 AB...............................14

BIFLEX
BIFLEX SERIES BF - 200 AB & BFN - 200......................16
BIFLEX MEGA SERIES BF - 600 AB................................18

SYMFLEX
SYMFLEX SERIES LGF-200, -300,
-400 MAX; -500 & -600 MEGA..........................................20

TERMS & CONDITIONS OF SALE

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 3

4 PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES
 ENGINEERED FILTRATION
FILTER CARTRIDGES
PROCESS TECHNOLOGIES 5
 FILTER CARTRIDGES

PUREFLEX SERIES PF-200AB & PFN-200

ABSOLUTE* & NOMINAL PLEATED POLYPROPYLENE

Pureflex Absolute* and Nominal Pleated Polypropylene Cartridges are a comprehensive line of
high-efficiency chemical and bacteria resistant filters. These nominal and Beta 5000-rated
cartridges offer high purity filtration for a wide range of commercial and industrial applications.
A wide selection of sizes, micron ratings, and endcap configurations contributes to their
versatility.

Absolute* Pureflex Pleated Polypropylene Cartridges are chemically compatible for a broad
range of applications. The cartridges use FDA-compliant materials and a thermal-bonding
process to seal the media, core, outer sleeve, and endcaps. Testing in our advanced in-house
laboratory, as well as by third-party laboratories, ensures data integrity and high-quality
absolute cartridges.

FEATURES/BENEFITS

PF cartridges have 99.98% efficiencies High dirt-holding capacity

at stated micron size (Beta 5000)
Low pressure drop
Available in 2.2-, 2.5- and 2.75-inch
Long cartridge life
diameters
Chemically compatible in most
100% Polypropylene media runs full
applications
length of cartridge
High purity filtration for a wide range of
Silicone, Buna-N®, Neoprene and
applications
Viton® gaskets and o-rings

APPLICATIONS

Chemicals
Cosmetic
Electronic
Food & Beverage
Ink
Magnetic Media
Medical
Pharmaceutical
Photographic
Pre-filter for RO systems

*Absolute defined as Bx >5,000

(99.98% efficiency at stated micron size)

Custom configurations available. Please contact customer service.

6 PROCESS TECHNOLOGIES | ENGINEERED FILTRATION - CATALOG FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Polypropylene

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 75 PSID

PRESSURE DROP VS FLOW RATE

Single 10-inch element

kPa psid
0.2 micron 0.5 micron 0.8 micron
14 2.0

12
1.6
10
Differential Pressure

1.2
8 2 micron

6
0.8 4 micron

4
12 micron
0.4
2 30 micron
45 micron
70 micron
0 0
0 2 4 6 8 10
Gallons/Minute

0 5 10 15 20 25 30 35
Liters/Minute

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: PF10-30BPPPDB
Pureflex Series PF-200AB & PFN-200
10-micron rating (10), 30” length (30), diameter 2.5 (B), Polypropylene core (P), Polypropylene
endcap (P), Polypropylene outer sleeve (P), Double - open - ended (D), Buna-N® seal (B)

PF 10 - 30 B P P P D B

ENDCAP OUTER SLEEVE ENDCAP SEAL MATERIAL

PUREFLEX MICRON LENGTH DIAMETER CORE MATERIAL
RATING* (IN.) (IN.) MATERIAL STYLE
PF* Absolute Nominal 2.2 = A Buna-N® = B2
51 Polypropylene = P Polypropylene = P Polypropylene = P SOE = S1
PFN* 2.5 = B Viton® = V3
0.6 0.2 9.75 =91 DOE = D2
2.75 = C Silicone = S
1.2 0.5 102 222 Flat = S22
EPR = R
2.5 0.8 202 222 Fin = F22
5 2 302 226 Flat = S63
10 4 402 226 Fin = F63
20 12
40 30
*For cartridges with Absolute micron ratings, use the prefix 1
2.2 diameter only
70 45
PF followed by the Absolute micron rating. Use the PFN 2
2.5 & 2.75 diameter only
prefix for cartridges with Nominal micron ratings. 3
2.75 diameter only

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 7

 FILTER CARTRIDGES

PUREFLEX MEGA SERIES PF-600AB

ABSOLUTE* PLEATED POLYPROPYLENE

Pureflex Mega Series PF-600AB Cartridges are uniquely designed large diameter (6- and 6.5-
inch) cartridges that maximize service life, and optimize efficiency.

Pureflex Mega Series PF-600AB are large diameter, coreless, single open end cartridges with
an inside-out flow pattern. These 6- and 6.5-inch diameter cartridges allow the use of
significantly smaller housings and fewer filters. The cartridges are constructed of FDA-listed
materials and a thermal-bonding process is used to seal the media, core, cage, and endcaps.
This adhesive-free process ensures bypass-free filtration.

FEATURES/BENEFITS

Available in 6- and 6.5-inch diameters Silicone or Buna-N® o-rings

with nylon endcaps Smaller filter vessel possible
Efficiency ratings of 99.98% (Beta Chemically compatible in most
5000) at stated micron size applications
Long cartridge life, 20-40 times High-purity filtration for a wide range of
fewer element change-outs than applications
comparable standard diameter
cartridges
High dirt-holding capacity

APPLICATIONS

Chemicals
Cosmetic
Electronic
Food & Beverage
Ink
Magnetic Media
Medical
Pharmaceutical
Photographic
Pre-filter for RO systems

*Absolute defined as Bx >5,000

(99.98% efficiency at stated micron size)

Custom configurations available. Please contact customer service.

8 PROCESS TECHNOLOGIES | ENGINEERED FILTRATION - CATALOG FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Polypropylene

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 50 PSID

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: PF10-20GXNPDB
Pureflex Mega Series PF-600AB
10-micron rating (10), 20” length (20), diameter 6.0 (G), Nylon endcap (N), Polypropylene Netting outter sleeve (P), Double-open-ended (D),
Buna-N® seal (B)

PF 10 - 20 G X N P D B

ENDCAP OUTER SLEEVE ENDCAP SEAL MATERIAL

PUREFLEX ABSOLUTE* LENGTH DIAMETER CORE MATERIAL
MICRON (IN.) (IN.) MATERIAL STYLE
RATING Buna-N® = B
Plated Steel = S2 Nylon = N Polypropylene Netting = P SOE = S
PF 5 20 6.0 = G Viton® = V
None = X1 Plated Steel = S1
10 40 6.5 = H Silicone = S
304 Stainless Steel = SS3
20 60 EPR = R
40
70 1
6 diameter only
2
6.5 diameter only
3
40 and 60-inch, 6.5 diameter only

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 9

 FILTER CARTRIDGES

PUREFLEX SERIES HEPP

HIGH EFFICIENCY PLEATED POLYPROPYLENE

Pureflex HEPP High Efficiency Cartridges are manufactured entirely of polypropylene

components, making them economical and chemically compatible for a broad range of
applications.

These cartridges are an effective and economical choice for a broad range of industrial
applications. Made from 100% polypropylene, the rigid outer cage design offers stability for
the pleated material. Using FDA-listed materials, a thermal bonding process is used to seal
the media, core, cage and encaps. This glue-free process ensures bypass-free filtration for
superior compatibility.

FEATURES/BENEFITS

6.5 ft.2 (0.60 m2) of media per 10” Efficiency ratings exeeding 90%
(254 mm) length cartridge Single-piece cage and core construction
High dirt-holding capacity Available in 2.5” (63.5 mm) diameters
Long cartridge life with hard outer cage construction
Chemically compatible in most
applications
Low pressure drop

APPLICATIONS

Chemicals
Cosmetic
Electronic
Food & Beverage
Ink
Magnetic Media
Medical
Pharmaceutical
Photographic
Pre-filter for RO systems

Custom configurations available. Please contact customer service.

10 PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER - CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filtration Media Polypropylene

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 50 PSID (3.4 bar)

PRESSURE DROP VS FLOW RATE

16
(1.1)
Approximate Net Pressure Drop – psi (Bar)

14
(0.97)

12
(0.83)

10
0.69)

8
(0.55)

6
(0.41)

4
(0.28)

2
(0.14)

0
0 1.0 2.0 3.0 4.0 5.0 6.0
(3.8) (7.6) (11.4) (15.1) (18.9) (22.7)
ORDERING INFORMATION
Flow Rate – gpm (Lpm)

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: HEPP10-30DS
Pureflex HEPP High Efficiency Filter Cartridge
10-micron rating (10), 30” length (30), Double-open-ended (D), Silicone seal (S)

HEPP 10 - 30 D S

ABSOLUTE- LENGTH ENDCAP SEAL MATERIAL

PUREFLEX
MICRON (IN.) STYLE
RATING*
HEPP 0.2 10 DOE = D Buna-N = B
0.45 20 222 Flat = S2 Silicone = S
1 30 222 Fin = F2 EPDM= E
2 40 226 Flat = S6
5 226 Fin = F6
10 SPE w/Spring = S3 *Absolute defined as Bx >5,000
20 SOE wi/ Core Extender = S4 (99.98% efficiency at stated micron size)
40

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 11

 FILTER CARTRIDGES

TRIFLEX SERIES GF-200AB & GFN-200

ABSOLUTE* & NOMINAL MICROFIBERGLASS

Premium quality Triflex Series GF-200AB and GFN-200 Microfiberglass Filter Cartridges deliver
high-purity nominal or absolute* filtration using proprietary technology. These cartridges are
ideal for a wide variety of applications that require high-performance filtration with low pressure
drops.

Triflex Series GF-200AB Cartridges feature optimized construction for true depth loading. This
allows for superior dirt-holding capacity, high flow rates and long cartridge life.

FEATURES/BENEFITS

Available in 2.2-, 2.5- and 2.75-inch Reduced change-out frequency

diameters Minimal fiber migration that can result
Proprietary high-efficiency glass in downstream contamination
microfiber media Captures gels and amorphous
GF cartridges have 99.98% (Beta 5000) contaminants from a fluid stream
efficiencies at stated micron ratings High dirt-holding capacity
True gradient density matrix with High flow rates
tapered pore structure
Encapsulated endcap and gasket
design

APPLICATIONS

Chemicals
Cosmetics
Electronics
Food and Beverage
Gases
Magnetic Media
Oil and Gas
Pharmaceutical
Photographic

*Absolute defined as Bx >5,000

(99.98% efficiency at stated micron size)

Custom configurations available. Please contact customer service.

12 PROCESS TECHNOLOGIES | ENGINEERED FILTRATION - CATALOG FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Proprietary Microfiberglass

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 75 PSID

PRESSURE DROP VS FLOW RATE

kPa psid Single 10-inch element

14 2.0 0.5 micron

12 1 micron
1.6
10
Differential Pressure

2 micron

1.2
8 3 micron
5 micron
6
0.8
10 micron
4
0.4
2
20 micron
30 micron
0 0
0 2 4 6 8 10
Gallons/Minute

0 5 10 15 20 25 30 35
Liters/Minute

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: GF10-10CPPPDB
Triflex Series GF-200AB & GFN-200
10-micron rating (10), 10” length (10), diameter 2.75 (C), Polypropylene core (P), Polypropylene endcap (P), Polypropylene outer sleeve (P),
Double-open-ended (D), Buna-N® seal (B)

GF 10 - 10 C P P P D B

ENDCAP OUTER SLEEVE ENDCAP SEAL MATERIAL

TRIFLEX MICRON LENGTH DIAMETER CORE MATERIAL
RATING* (IN.) (IN.) MATERIAL STYLE
Absolute Nominal
GF* 0.5 0.1 Polypropylene = P Polypropylene = P Polypropylene = P SOE = S1 Silicone = S1
51 2.2 = A
GFN* 1 0.2 DOE = D2 Buna-N® = B2
102 2.5 = B
2 0.5 222 Flat = S22 Viton® = V
202 2.75 = C
3 0.8 222 Fin = F22 EPR = R
302
5 1.2 226 Flat = S63
402
10 3 226 Fin = F63
20 8
*For cartridges with Absolute micron ratings, use 1
2.2 diameter only 3
2.75 diameter only
30 12
the prefix GF followed by the Absolute micron rat- 2
2.5 & 2.75 diameter only 4
DOE endcap only
ing. Use the GFN prefix for cartridges with Nominal
micron ratings.

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 13

 FILTER CARTRIDGES

TRIFLEX MEGA SERIES GF-600AB

ABSOLUTE* MICROFIBERGLASS

Triflex Mega Series GF-600AB Cartridges are a unique line of larger diameter, absolute*-rated
cartridges that are designed to maximize flow, service life and efficiency. These cartridges
require significantly smaller housings and fewer elements.

Triflex Mega Series GF-600AB Cartridges are large 6- and 6.5-inch diameter coreless pleated
cartridges that offer inside-to-outside flow patterns. These uniquely constructed cartridges
offer greater flow rates per element, fewer elements to change-out, and smaller housings. The
proprietary microfiber glass media offers absolute (Beta 5000) levels of consistent filtration.

FEATURES/BENEFITS

Available in 6- and 6.5-inch diameters Captures gels and amorphous

contaminants from a fluid stream
Proprietary high-efficiency glass
microfiber media Higher flow rates per element; fewer
elements to change
99.98% (Beta 5000) efficiencies at
stated micron size Significantly smaller housing sizes

Reduced change-out frequency

Minimal fiber migration that can result
in downstream contamination

APPLICATIONS

Chemicals
Cosmetics
Electronics
Food and Beverage
Gases
Magnetic Media
Oil and Gas
Pharmaceutical
Photographic

*Absolute defined as Bx >5,000

(99.98% efficiency at stated micron size)

Custom configurations available. Please contact customer service.

14 PROCESS TECHNOLOGIES | ENGINEERED FILTRATION - CATALOG FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Proprietary Microfiberglass

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 75 PSID

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: GF10-18GSSSDB
Triflex Mega Series GF-600AB
10-micron rating (10), 18” length (18), diameter 6.0 (G), Steel core (S), Steel endcap (S), Steel outer sleeve (S), Double-open-ended (D),
Buna-N® seal (B)

GF 10 - 18 G S S S D B

ENDCAP OUTER SLEEVE ENDCAP SEAL MATERIAL

TRIFLEX ABSOLUTE* LENGTH DIAMETER CORE MATERIAL
MICRON (IN.) (IN.) MATERIAL STYLE
RATING Buna-N® = B2
Nylon = N Polypropylene = P1 SOE = S1
GF .5 181 6.0 = G Steel = S Silicone = S1
Steel = S1 Steel = S
1 201 6.5 = H None = N Viton® = V
2 361 EPR = R
3 40
5 441
10 601 1
6 diameter only
20 2
6.5 diameter only
30

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 15

 FILTER CARTRIDGES

BIFLEX SERIES BF-200AB & BFN-200

ABSOLUTE* & NOMINAL PLEATED CELLULOSE POLYESTER

Absolute* and Nominal Biflex Series Pleated Cellulose Polyester Cartridges are the benchmark
for critical industrial applications that demand optimal fluid filtration. Biflex cartridges are
available in a broad range of micron ratings to match specific applications.

Biflex Series BF-200AB and BFN-200 Cartridges are absolute- and nominal-rated cartridges
that are manufactured using proprietary cellulose and polyester fibers held together by an
acrylic binder. The media provides a gradient density matrix of microfibers with a tapered pore
structure that allows for true depth loading of contaminants throughout, and a Beta 5000 rated
efficiency of 99.98%.

The optimized construction of Biflex cartridges helps maximize profitability by reducing process
downtime, equipment repair or replacement, labor, and disposal costs.

FEATURES/BENEFITS

Available in 2.25-, 2.5- and 2.75-inch Long cartridge life reduces change-out
diameters frequency

Blended cellulose polyester media Higher flow rates with low pressure
specially formulated for aqueous drop
fluids Fixed pore structure minimizes fiber
BF cartridges have 99.98% (Beta 5000) migration
efficiencies at stated micron ratings
Encapsulated design ensures gasket
stays in place during change-outs

APPLICATIONS

Aqueous Fluids
Chemicals
Electronics
Magnetic Media
Oil and Gas
Pharmaceuticals
Photographic
Water
*Absolute defined as Bx >5,000
(99.98% efficiency at stated micron size)

Custom configurations available. Please contact customer service.

16 PROCESS TECHNOLOGIES | ENGINEERED FILTRATION - CATALOG FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Blended Cellulose Polyester

Max. Temp. Rating 180˚F
(82.2˚C) (275°F with certain options)
Max. Differential
Pressure 75 PSID

PRESSURE DROP VS FLOW RATE

kPa psid Single 10-inch element

14 2.0 7 micron

12
1.6
10 micron
10
Differential Pressure

1.2
8 20 micron

6
0.8
40 micron
4
0.4
2 70 micron
100 micron
0 0
0 2 4 6 8 10
Gallons/Minute

0 5 10 15 20 25 30 35
Liters/Minute

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: BF20-10BPPPDB
Biflex Series BF-200AB & BFN-200
20-micron rating (20), 10” length (10), diameter 2.5 (B), Polypropylene core (P), Polypropylene endcap (P), Polypropylene outer sleeve (P),
Double-open-ended (D), Buna-N® seal (B)

BF 20 - 10 B P P P D B

ENDCAP OUTER SLEEVE ENDCAP SEAL MATERIAL

BIFLEX MICRON LENGTH DIAMETER CORE MATERIAL
RATING* (IN.) (IN.) MATERIAL STYLE
Absolute Nominal
10 2 51 2.25 = A Polypropylene = P Polypropylene = P Polypropylene = P SOE = S1 Buna-N® = B
BF
*

20 3 102 2.5 = B DOE = D2 Silicone = S

BFN*
40 10 202 2.75 = C 222 Flat = S22 Viton® = V
70 30 302 222 Fin = F22 EPR = R
100 50 402
1
2.25 diameter only
*For cartridges with Absolute micron ratings, use the prefix BF followed by the 2
2.5 & 2.75 diameter only
Absolute micron rating. Use the BFN prefix for cartridges with Nominal micron ratings.

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 17

 FILTER CARTRIDGES

BIFLEX MEGA SERIES BF-600AB

ABSOLUTE* PLEATED CELLULOSE POLYESTER

Biflex Mega Series BF-600AB is a unique line of larger-diameter (6- and 6.5-inch) absolute*-
rated cartridges that are designed to maximize flow-rates, service life and efficiency. These
optimal size cartridges allow you to use significantly smaller housings and fewer elements.

Biflex Mega Series BF-600AB is a large diameter, cartridge with inside-to-outside flow pattern.
These 6- and 6.5-inch diameter cartridges are manufactured using proprietary cellulose and
polyester fibers held together by an acrylic binder. The media provides a gradient density matrix
of microfibers with a tapered pore structure that allows for true depth loading of contaminants.

FEATURES/BENEFITS

Available in 6- and 6.5-inch diameters Higher flow rates with low pressure
drop
Available in 18-, 36-, 40- and 44-inch
lengths Fixed pore structure eliminates fiber
migration
99.98% (Beta 5000) efficiencies at
stated micron size Significantly smaller housing sizes

Long life cartridge: 20-40 times fewer

element change-outs than standard
diameter elements

APPLICATIONS

Chemicals
Electronics
Magnetic Media
Oil and Gas
Pharmaceuticals
Photographic
Water

*Absolute defined as Bx >5,000

(99.98% efficiency at stated micron size)

Custom configurations available. Please contact customer service.

18 PROCESS TECHNOLOGIES | ENGINEERED FILTRATION - CATALOG FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Blended Cellulose Polyester

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 75 PSID

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: BF10-18GSSSDB
Biflex Mega Series BF-600AB
10-micron rating (10), 18” length (18), diameter 6.0 (G), Steel core (S), Steel endcap (S), Steel outer sleeve (S), Double-open-ended (D),
Buna-N® seal (B)

BF 10 - 18 G S S S D B

ENDCAP OUTER SLEEVE ENDCAP SEAL MATERIAL

BIFLEX ABSOLUTE* LENGTH DIAMETER CORE MATERIAL
MICRON (IN.) (IN.) MATERIAL STYLE
RATING
181 6.0 = G Steel = S Steel = S1 Steel = S1 SOE = S Buna-N® = B
BF 10
361 6.5 = H Nylon = N2 Polypropylene = P2 Silicone = S
20
402 Viton® = V
40
441 EPR = R
70
100
1
6 diameter only
2
6.5 diameter only

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 19

 FILTER CARTRIDGES

SYMFLEX SERIES FGF-200,-300,

-400 MAX; -50 & -600 MEGA
LIQUID / GAS COALESCING
Symflex Series Liquid/Gas Coalescer Cartridges feature specialized binders and fibers for
added resistance to corrosive gases, chemicals and extreme temperatures. They are designed
to maximize efficiency and dirt-holding capacity while minimizing pressure drop.

Symflex Series Cartridges have a wide variety of standard and custom shapes, sizes and
configurations can be manufactured to match your specific application. Specialized binders and
fibers are available for resistance to corrosive gases, chemicals and extreme temperatures.
Various endcaps and structures can be added for additional support and positive sealing. For
high-efficiency coalescing applications, polyurethane or glass drain layers are added for positive
drainage of coalesced liquids.

FEATURES/BENEFITS

0.3 micron rating Structural stability ensures solid

contaminants are not released back into
DOP efficiency ratings ranging from the gas or liquid stream
99.9999% at Media Grade 01 with
0.001 ppm oil carryover to 90% DOP Gradient density microfiber, with a
efficiency at Media Grade 10 with 1.0 tapered pore structure
ppm oil carryover Maximum efficiency and dirt-loading
Precision matrix of synthetic capacity with minimal pressure drop
microfibers provides consistent pore Large contaminant-holding capacity
configuration around cartridge
True depth loading of contaminants
Seamless tubular configuration with
highly porous media Filtration efficiency matched to
application requirements
Precisely controlled manufacturing
conditions and media formulations

APPLICATIONS

Air/Oil Separators Membrane Pre-filters

Analyzers Mist Eliminators
Dryer Pre-filters/Afterfilters Refineries
HVAC Controls Respiratory
Instrumentation Steam Sterilizers
Medical Vacuum Inlet/Exhaust

Custom configurations available. Please contact customer service.

20 PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES

 ENGINEERED FILTRATION

SPECIFICATIONS

Filter Media & Endcaps Synthetic Microfiber

Max. Temp. Rating 180˚F
(82.2˚C)
Max. Differential
Pressure 75 PSID

ORDERING INFORMATION

To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
EXAMPLE: LGF.3-20CMPPGCDB
Symflex Series FGF-200,-300, -400 MAX; -50 & -600 MEGA
.3-micron rating (.3), 20” length (20), diameter 2.75 (C), Formed Microfiber Glass (MP), Polypropylene core (P), Polypropylene endcap (G), Steel
retainer (C), Double-open-ended (D), Buna-N® seal (B)

LGF .3 - 20 C MP P G C D B

SYMFLEX MICRON LENGTH DIAMETER MEDIA CORE ENDCAP RETAINER ENDCAP SEAL
RATING (IN.) (IN.) MATERIAL MATERIAL STYLE MATERIAL

LGF 0.3 101 2.75 = C Formed Microfiber Polypropylene = P Glass-filled Corrosion DOE = D Viton® = V
122 3.1 = D Glass = MP Corrosion Resistant Polypropylene = G Resistant SOE = S Buna-N® = B
242 4.5 = M Steel = C Corrosion Steel = C SOE w/
301 5.5 = J Resistant Steel = C SOE = S Threaded
362 6=G Nylon = N None = X Base = ST
722
1
LGF-200 Max Only
2
LGF-300 Max, -400 Max,
-500 Mega & -600 Mega Only

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES 21

 TERMS & CONDITIONS OF SALE
The Terms and Conditions of Sale appearing below govern the sale of goods and/or services sold or supplied by Pentair Filtration Solutions, LLC and
its international affiliates, referred to herein as “Seller” while the purchaser is referred to herein as “Buyer”. The parties agree that even if these
Terms and Conditions of Sale do not accompany every product sold by Seller, these Terms and Conditions of Sale shall govern all sales made by Seller
until such time as new terms and conditions are provided by Seller to Buyer.

ACCEPTANCE Buyer’s order is accepted upon the following terms and conditions. If the terms stated in Buyer’s order are inconsistent with
these terms, this shall constitute a counteroffer and Buyer shall be deemed to have accepted Seller’s terms unless it notifies
Seller to the contrary in writing within three (3) days after receiving Seller’s acknowledgment. Minimum order requirements
may apply based on the product you are ordering; confirm any minimum order requirements with your account manager. No
additions to or modifications of any of the terms and conditions hereof shall be effective unless made in writing and signed
by both parties. These Terms and Conditions constitute the entire agreement between the Seller and Buyer for the purchase
and sale of the goods and/or services identified on Seller’s acknowledgment of Buyer’s purchase order and supersede all
other proposals and quotations.
DESCRIPTION The only specifications that are a part of this Agreement are those written specifications acknowledged in writing by Seller
OF GOODS and which Seller has initialed and attached to the applicable acknowledgment of Buyer’s purchase order.
CANCELLATION Cancellation of orders by Buyer can only be made with Seller’s prior written consent. If the product is being built to Buyer’s
specification, Buyer is responsible for all expenses incurred by Seller, including any raw materials and other non-cancel-able
commitments, or a minimum 25% cancellation charge, whichever is greater. Domestic orders: Orders canceled less than 5
days prior to the scheduled delivery date shall be finished and billed at contract price. Export Orders: Orders canceled less
than 10 days prior to the scheduled delivery date shall be finished and billed at contract price.
QUOTATIONS Orders will be billed at the price in effect at the time of order, unless otherwise specified in the quotation. All orders require
AND PRICES a valid customer PO number and written confirmation prior to acceptance by Seller. Quotations are valid for thirty (30) days
unless otherwise specified and represent no obligation until the purchase order is acknowledged and accepted by Seller.
The price and performance of orders are subject to resource availability and costs within the control of Seller at the time
of manufacture. Seller reserves the right to cancel or adjust prices and delivery without notice. Unless otherwise stated
in writing by Seller, all prices quoted shall be exclusive of and Buyer shall pay the cost of transportation, insurance, taxes
(including, without limitation, any sales, use, or similar tax), license fees, customs fees, duties and other charges related
thereto. All clerical errors are subject to correction. Any price discrepancy on orders will require a revised PO from Buyer.
PAYMENT Subject to the provisions of Seller’s credit policy, payment terms are 1%/10 net 30 days from date of invoice unless otherwise
noted on the invoice. Thereafter, interest shall accrue on unpaid amounts at the lesser of the maximum rate allowable under
law or at the rate of 1.5% per month. All payments must be made in US funds. Buyer shall be liable for Seller’s costs of
collection, including, without limitation, reasonable attorneys’ fees.
DELIVERY/ Delivery & Shipment - Shipping date(s) proposed by Seller constitutes only an estimate on the part of Seller. Buyer’s PO
SHIPMENT must specify preferred carrier or order will be shipped via best way, prepay and added to the invoice. Delivery of goods
AND EXPORT to a carrier at the Named Place (whether Seller’s plant or whatever other place is identified and agreed) shall constitute
CONTROLS delivery. Terms used shall be defined as in Incoterms 2010 Rules. Title to goods purchased hereunder, as well as the risk
of loss, shall in domestic sales pass to Buyer at the Seller’s door, and shall in international sales pass to Buyer upon entry
into international waters, entry into international airspace, or the crossing of an international border, with the sole exception
of banked transactions (L/C, DAA, DAP) in which case the transfer of title occurs upon exchange of documents at the bank
window, and the transfer of risk of loss occurs upon entry into international water, international airspace, or the crossing of
an international border. Buyer shall make claims for loss or damage to goods while in transit against the carrier. Additional
charges will be incurred by Buyer for special processing for export orders and drop shipments outside of the United States
of America. To the extent applicable, Buyer agrees to comply with relevant hazardous materials shipping regulations when
reselling any good classified as a hazardous material. Seller reserves the right to make partial shipments. Buyer agrees
to comply with all U.S. export controls and regulations and will not sell, ship to, or otherwise involve Seller’s goods with any
banned country or denied party on any banned list in violation of U.S. export controls and regulations. Buyer shall notify
Seller if any goods ordered are intended for use in a military application. If Buyer provides components, molds, or other
technology bearing a classification other than EAR-99, Buyer shall notify Seller prior to providing such items.
INSPECTION/ Upon receipt of the goods, Buyer shall promptly and without delay examine the goods as to their condition, quality and
RETURNS quantity. Unless the Buyer notifies Seller in writing to the contrary within eight (8) business days from the date of receipt of
the goods, the goods shall be deemed to have been duly received and accepted as to condition, quality and quantity, without
apparent damage. Authorization and shipping instructions for the return of any sale-able goods must first be obtained from
Seller; otherwise return shipments will be refused. The return of goods is limited to no longer than one (1) year from the
date of purchase, verified by invoice. Goods built to Buyer’s or an end user’s specifications and special orders cannot be
returned. Transportation charges on returned goods must be prepaid and are Buyer’s responsibility. Goods may be returned
for credit only. Returned goods must be carefully packed so as to reach Seller without damage. A 25% restocking charge
will be deducted from any credit memorandum issued for returned goods. If goods are returned due to some fault of Seller,
full credit will be issued, including whatever transportation costs Buyer may have incurred, provided the return has been
authorized by Seller in writing and is in accordance with the packing and shipping instructions provided by Seller.

22 PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.759.6693 or 1.651.653.2000 FILTER CARTRIDGES

 WARRANTIES Unless otherwise provided in a warranty for the specific product purchased or unless required by local law, Seller hereby
warrants that all goods purchased hereunder shall be free from material defects in material and workmanship for a
period of one (1) year from the date of shipment to Buyer. If within such one-year period such goods shall be proven to be
materially defective to Seller’s reasonable satisfaction, then such defective goods shall be repaired or replaced at Seller’s
sole option. In the event the goods cannot be repaired or replaced, Seller shall issue a credit to Buyer for the purchase
price of the defective goods. Such repair, replacement, or refund shall constitute a fulfillment of all liabilities in respect of
such goods. The warranty for all goods sold by Seller but manufactured by others shall be the warranty provided by such
manufacturer for such goods. Seller shall take all commercially reasonable efforts (other than the payment of money) to
provide the manufacturer’s warranty to Buyer. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL
OTHER EXPRESS OR IMPLIED WARRANTIES WHATSOEVER (EITHER IN FACT OR BY OPERATION OF LAW), INCLUDING
BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR
OTHERWISE. Seller is not liable for damage to goods, property or persons arising out of the improper installation of such
goods; modification, repair or tampering of such goods by anyone other than Seller; misuse of the goods; or utilization of the
goods under conditions exceeding specifications for such goods.
LIMITATION SELLER SHALL HAVE NO LIABILITY TO ANY PERSON FOR PUNITIVE, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR
OF LIABILITY CONSEQUENTIAL DAMAGES OF ANY DESCRIPTION OR LOSS OF USE, REVENUE OR PROFITS, WHETHER ARISING OUT OF
WARRANTY OR OTHER CONTRACT, NEGLIGENCE OR OTHER TORT, OR OTHERWISE.
INSURANCE Seller shall obtain and maintain appropriate insurance coverage with limits sufficient to cover the liabilities outlined in these
terms and conditions. Seller will provide a basic certificate of insurance evidencing coverage at request of Buyer; however, in
no event will Buyer be added as an additional insured on Seller’s policies.
Marine Insurance: The party responsible for paying the main transportation shall provide full cargo insurance coverage –
defined as door-to-door, “A” cover, all risk, marine, war, strike and riot – regardless of the shipping terms, with the exception
of CFR/CPT Incoterms, in which insurance is the buyer’s responsibility. On E and F terms, plus CFR and CPT, the buyer shall
provide full cargo insurance coverage. On D terms, plus CIF and CIP, the seller shall provide full cargo insurance coverage.
For destinations and/or cargo on which governmental or insurance restrictions require additional approvals and/or
premiums, or a split in coverage other than house-to-house, the responsible party/parties shall take such additional
measures to ensure that the shipment is appropriately covered.
TOOLING Unless specifically provided in writing executed by the Seller and the Buyer, any equipment (including, but not limited to, jigs,
dies, tools, molds and patterns) made for the manufacture of customer specified goods or products shall be, and remain, the
sole property of Seller notwithstanding that Buyer may have been charged for all or part of the cost therefor.
ENGINEERING / Seller reserves the right to make design, specification and/or engineering changes to its products without prior notification
DESIGN CHANGES to Buyer. Title to, and full and unrestricted ownership and right to use all designs, specifications and engineering
information provided by Seller shall at all times be and remain vested in Seller.
GOVERNING LAW This Agreement shall be deemed to have been made in and shall be construed in accordance with and governed by the laws
of the State of Texas, without regard to the conflict of law provisions thereof, and shall be subject to the exclusive jurisdiction
of the state and federal courts sitting in the State of Texas. The United Nations Convention on Contracts for the International
Sale of Goods shall not apply.
FORCE MAJEURE Seller shall not be under obligation or have any liability that may arise out of any delay in its performance or
nonperformance caused directly or indirectly by fire, explosion, accidents, strikes, embargoes, floods, epidemics, quarantine
restrictions, unusually severe weather, labor shortage, war, act of or authorized by any government, inability to obtain
suitable material, equipment, fuel power or transportation, or act of God or arising from contingencies, occurrences or
causes beyond the reasonable control of Seller. In the event of delay due to any of the foregoing, the estimated shipping
date shall be extended for a period equal to the time lost by reason of such delay. Quantities sold hereunder affected by any
of the foregoing circumstances may be eliminated without liability, but these Terms and Conditions shall otherwise remain
unaffected.
ATTORNEY’S FEES In the event either party is required to bring an action in connection with the goods sold under these Terms or Conditions of
Sale or any action in connection with collection of amounts due to Seller hereunder, the prevailing party shall be entitled to
recover all of its costs and expenses including reasonable attorneys’ fees.

PROCESS TECHNOLOGIES | WWW.PENTAIREF.COM | CUSTOMER CARE: 800.279.9404 FILTER CARTRIDGES 23

For more information on Pentair Precision Filtration, please contact us at [email protected]

PRECISION FILTRATION
1350 HAMMOND RD., ST. PAUL , MN 55110, USA . +651.653.2000 MAIN, +651.653.2230 FAX, [email protected]

All Pentair trademarks and logos are owned by Pentair, Inc. All other brand or product names are trademarks or registered marks of their respective owners.
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
© 2015 Pentair, Inc. All Rights Reserved.

© 2015 Pentair Filtration Solutions, LLC CEF02_LTRE2015