Scribd
Upload
1K views1 page

M30 With Fly Ash

This document provides a concrete mix design for a M30 grade concrete project located in Mumbai. The mix uses OPC 53 grade cement, fly ash, crushed rock and river sand aggregates, and an admixture. The target mean compressive strength is 38.25 MPa. The mix proportion by weight is 1 part cement, 2.75 parts fine aggregates, and 2.26 parts coarse aggregates, with a free water-cement ratio of 0.38. Testing is required before using the mix to account for variations in materials.

Uploaded by

Rishabh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views1 page

M30 With Fly Ash

This document provides a concrete mix design for a M30 grade concrete project located in Mumbai. The mix uses OPC 53 grade cement, fly ash, crushed rock and river sand aggregates, and an admixture. The target mean compressive strength is 38.25 MPa. The mix proportion by weight is 1 part cement, 2.75 parts fine aggregates, and 2.26 parts coarse aggregates, with a free water-cement ratio of 0.38. Testing is required before using the mix to account for variations in materials.

Uploaded by

Rishabh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

CONCRETE MIX DESIGN

DATE : 1/6/2020
Project :
Location of Project : Mumbai
Grade of Concrete : M 30
Maximum Size of Aggregate : 20 mm
Workability of Concrete Required : 120 +/- 25 mm
Assumed Standard Deviation : 5 Mpa
Degree of Quality Control : Good
Type of Exposure : Mild
Value of 'k' : 1.65
TARGET MEAN STRENGTH N/mm2 : 38.25 Mpa
BASIC DATA
CEMENT
Type of Cement OPC 53 Grade Cement %
Specific Gravity 3.15 80%
FLYASH
Specific Gravity 2.25
Fly ash in Total Cementitious 20%
GGBS
Specific Gravity 2.9
GGBS in Total Cementitious 0%
AGGREGATES
20 MM 10 MM Crushed Sand River Sand

Crushed Rock, Crushed Crushed Rock,


Type and Source of Aggregates
Turbhe Rock, Turbhe Turbhe

Specific Gravity 2.84 2.824 2.81 2.83


Average Specific Gravity 2.825
Water Absorption 1.51% 2.03% 3.50% 3.70%
Aggregates % in Total Agg. 23% 22% 37% 18%
ADMIXTURE
Specific Gravity
Dosage Of Admixture 0.8%
MATERIAL REQUIRED PER m3 OF CONCRETE
Total Cementitious Content 400 Kg
Entraped Air 0%
Cement 320 Kg
Fly Ash 80 Kg
GGBS 0 Kg
Water Cement Ratio 0.38
Free Water 152 lits
Total Volume of Aggregates 0.711 Cum
Coarse Aggregates - 20mm 464 Kg
Coarse Aggregates - 10mm 442 Kg
Crushed Sand 739 Kg
River Sand 362 Kg
Admixture 3.2 Kg
Density of Fresh Concrete 2562 Kg/m3
MIX PROPORTION BY WEIGHT:
CEMENT FINE AGGREGATES COARSE AGGREGATES
1 2.75 2.26
FREE (W/C) RATIO 0.38

Note : Mix Design is done by taking aggregates in saturated surface dry condition (SSD).
Note : Correction for water to be done as per moisture content during production.
Note : Do not use it, without doing at least 3 trials with each brand of cement and admixture.

You might also like