Scribd
Upload
2K views1 page

Mi3530 B1820401

1) A certificate of analysis was issued for a batch of polypropylene material with grade MI3530 and product description PPCP MI 3530. 2) Testing found the melt flow index was 3.1 g/10 min, meeting the specification of 2.5-3.5 g/10 min. 3) The material was certified to meet specifications for prime grade polypropylene and relevant FDA requirements.

Uploaded by

abinaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Mi3530 B1820401

1) A certificate of analysis was issued for a batch of polypropylene material with grade MI3530 and product description PPCP MI 3530. 2) Testing found the melt flow index was 3.1 g/10 min, meeting the specification of 2.5-3.5 g/10 min. 3) The material was certified to meet specifications for prime grade polypropylene and relevant FDA requirements.

Uploaded by

abinaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Format No: RILVMD/QAD/PPCB/AR03

Reliance Industries Limited


Vadodara Manufacturing Division
QA/QC Laboratory
CERTIFICATE OF ANALYSIS Certificate No: TC-7091

Poly Propylene ULR-TC709118000000462P


Date : Nov 22, 2018
Grade : MI3530
Product Description : PPCP MI 3530
Batch : AAB1820401
Analysis Date : Oct 22, 2018

Sr.No. Parameters Test Method UOM Specification Test Result


Melt flow index (230°C / 2.16
1 ASTM-D1238 g/10 min 2.5 - 3.5 3.1
kg )

Remarks:-
* Product conforms to the specification.
* Results relate to the item tested only.
* Test report shall not be reproduced except in full without written permission.
* This document shall not be published / reproduced for advertisement purpose.

Authorised Signatory
For and on Behalf of RIL

* 1) Material meets the specifications for Prime Grade.


* 2) REPOL MI3530 is manufactured, in general, as per requirements stipulated in IS-10910 on "Specification for Polypropylene & its copolymers for safe use in
contact with foodstuff, pharmaceuticals and drinking water". Basic chemicals / additives incorporated in the grade conform to the positive list of constituents
as prescribed in IS-10909. Thus the grade is produced generally in line with FDA requirements laid down in FDA:CFR Title 21,177.1520, Olefin polymers.
* 3)The data, information and suggestions contained herein are given purely as a guide. RIL undertakes no responsibility either for the results deriving from
their adoption or for possible use for various applications.
This is electronically generated document, hence no signature is required.

Page 1 of 1

You might also like