INDEX

Sl.No. Particulars
1 PROCEEDINGS OF THE SUPERINTENDING ENGINEER, DHARWAD CIRCLE, DHARWAD
2 GENERAL NOTES
3 WEIGHTAGE
4 MATERIAL RATES
5 HIRE CHARGES
6 LABOUR WAGES

CHAPTERS
1.0 MORTAR
2.0 EARTHWORK FOR BUILDINGS
3.0 ANTI TERMITE TREATMENT
4.0 CEMENT CONCRETE
5.0 STONE WORK
6.0 BRICK WORK
7.0 STEEL AND ALLUMINIUM WORK
8.0 ROOFING
9.0 WOOD WORK
10.0 WATER PROOFING
11.0 DRAINAGE WORK
12.0 SANITARY WORK
13.0 WATER SUPPLY WORK
14.0 FLOORING
15.0 FINISHING WORK
16.0 REPAIRS TO BUILDINGS
17.0 ROADS AND BRIDGES - CARRIAGE OF MATERIALS
18.0 SITE CLEARANCE AND DISMANTLING
19.0 EARTH WORK, EROSION CONTROL AND DRAINAGE
20.0 SUB BASES-BASES (NON BITUMINOUS) AND SHOULDERS
21.0 BASE AND SURFACE COURSES (BITUMINOUS)
22.0 CONCRETE PAVEMENT
23.0 GEOSYNTHETIC AND REINFORCED EARTH
24.0 TRAFFIC SIGNS, MARKINGS & OTHERS ROAD APPURTENANCES
25.0 BRIDGES - PILE FOUNDATION
26.0 BRIDGES - WELL FOUNDATION
27.0 BRIDGES - OPEN FOUNDATIONS
28.0 BRIDGES - SUB-STRUCTURE
29.0 BRIDGES - CONCRETE SUPERSTRUCTURE
30.0 BRIDGES - RIVER TRAINING WORKS AND PROTECTION WORKS
31.0 EXPANSION JOINTS
32.0 BRIDGES - WEARING COAT & APPURTENANCES
33.0 BRIDGES - REPAIR AND REHABILITATION
34.0 PIPE CULVERTS
35.0 MAINTENANCE OF ROADS
36.0 REINFORCED EARTH STRUCTURE
37.0 OTHER ITEMS
38.0 INNOVATIVE ITEMS
39.0 FURNISHING WORK
40.0 FIRE FIGHTING WORK
41.0 ENERGY CONSERVATION BUILDING CODE
Item Code Item Description Unit
1. ADHESIVES
0009 Adhesive(for flooring) Kg
0509 Adhesive for tiles Kg
0514 Adhesive for joints Kg
0022 Bees Wax Kg
0513 High bond tile adhesive for vitrified tiles Kg
2008 Fevicol kgs
2047 Ball Adhesives kgs
0387 Shellac kgs
2. AGGREGATE
2a. BRICK AGGREGATE / BRICKS / BLOCKS
0054 Brick bats 25 to 100 mm cum
0055 Brick aggregate 20 mm(Nominal) cum
0056 Brick aggregate 25 mm(Nominal) cum
0064 Burnt brick class designation 35 ( Non Modular) Ground Moulded 100 Nos.
0503 Burnt brick class designation 35 (modular) 100 Nos.
0488 Table moulded bricks class designation 50 (non modular) 100 Nos.
0504 Table moulded class designation 50 (modular) 100 Nos.
0505 Wire cut bricks of class designation 75 (non modular) 100 Nos.
0506 Wire cut bricks of class designation 75 ( modular) 100 Nos.
0311 Pre-cast hollow blocks (40x20x20cms) -5.00 N/sqmm. 100 Nos.
0391 Solid blocks (concrete 40x20x20cms) -4.00 N/sqmm 100 Nos.
0497 Hollow concrete blocks(40x20x20cms)-3.50 N/sqmm 100 Nos.
0498 Hollow concrete blocks(40x20x15cms)-3.50 N/sqmm 100 Nos.
0499 Hollow concrete blocks(40x20x10cms)-3.50 N/sqmm 100 Nos.
2b. STONE AGGREGATE
0175 100 mm and down nominal size cum
0734 53 mm nominal size cum
0750 40 mm nominal size cum
0060 30 mm nominal size cum
0800 25 mm nominal size cum
0749 20 mm nominal size cum
0058 12.5 mm nominal size cum
0057 10 mm nominal size cum
0707 6 mm nominal size cum
0803 Fine aggregate 2.36 mm nominal size cum
0762 Key aggregates 22.4 to 2.8 mm cum
0746 Filter media stone aggregate 60mm & down size cum
0904 Coarse aggregates 53 mm cum
0906 Crushed aggregates 37.5mm cum
0912 Crushed coarse aggregate (Supply of hand broken aggregates) 100mm & cum
down size
0919 Key aggregates passing 26.5mm to 2.8mm cum
0921 Crushed stone aggregate 13.2mm to 10mm cum
0922 Crushed stone chipping, 19mm cum
0926 Crushed aggregate 9.5mm to 4.75mm cum
0567 Filler Aggregates Tonne
2c. STONE CHIPPINGS
0732 Crushed stone chippings 11.2 mm cum
0733 Crushed stone chippings 13.2 mm cum
0400 Stone dust / Grit 4.75mm to 0.075mm cum
0815 Crushed stone chipping 5.6 mm size cum
0819 Lime Stone Dust 0.075mm & down size Tonne
2d. SAND / GRAVEL
0287 Pea size gravel/6mm and down stone grit cum
0334 Sand/ Artificial Sand/ Manufactured Sand cum
0551 Ordinary earth cum
0731 Sand / Crushed Sand cum
0751 Granular material 2.36mm cum
0752 Gravel 2.36 mm cum
0772 Natural sand 5.6 to 75 micron cum
0781 Quartz sand kgs
3. STONES
0039 Boulders cum
0066 Burnt stone slabs 10cms thick Sqm
0174 Granite stone slabs fine dressed 40 mm thic Sqm
0330 Rubble stones cum
0401 Stone slab 10 to 12 cm thick Sqm
0720 Bond stone 20x20x45 cm Each
0780 Quarry spalls cum
0789 Size stone 20x20x25 cms Each
0790 Spall (jelly used for packing) cum
0793 Rough stones 15cm to 45cm cum
0794 Stone boulders 30 cm thick cum
0795 Stone spalls cum
0939 Stone with minimum size of 200mm cum
4. ALUMINIUM
0010 Aluminium beading kgs
0011 Aluminium handles - 15mm Each
0012 Aluminium hinges 75 mm length Each
0013 Aluminium stays Each
0014 Aluminium tower bolt - 20 cm Each
0017 Aluminium sheet for strips Sqm
0018 Aluminium window frame section 1.2 mm thick kgs
0522 Aluminium Composite panel of approved colour straight portion Sqm
0533 Aluminium frame section kgs
0544 Aluminium composite panel of curved portion Sqm
0860 Aluminium studs 100 x 100mm fitted with lense reflectors Nos
0942 Aluminium sheeting fixed with encapsulated lens Sqm
0943 Aluminium alloy/galvanised steel/ Galvanised MS plate Tonne
0944 Aluminium alloy plate, 2mm thick Sqm
2069 Alluminium anodised profile top cap beading M
5. ASBESTOS CEMENT PRODUCTS (EXCEPT PIPES)
0007 AC sheet 6 mm thick semi corrugated Sqm
0008 AC sheet 6 mm thick semi trafford Sqm
0327 Ridges (AC sheet) Pair
6. BITUMEN
0717 Bitumen 80/100 Grade bulk Tonne
0835 Bitumen 80/100 Packed Tonne
0814 Bitumen 60/70 Grade Bulk Tonne
0836 Bitumen 60/70 Packed Tonne
0030 Bitumen 85/25 Grade Tonne
0820 Bitumen 30/40 Grade Tonne
0730 CRMB 55 Grade Tonne
0806 NRMB 70 Grade Tonne
0735 Cut back MC 70 Tonne
0718 Bitumen emulsion Tonne
0031 Bitumen felt (hessian based) Sqm
0032 Bitumen washer Each
0109 Coal tar Sqm
0108 Coal tar paint Litre
0035 Blown or residual bitumen Tonne
0807 Polymer MB 70 Grade Tonne
 7. BLASTING MATERIAL
0736 Detonator Each
0738 Drill bits Nos
0786 Safety fuse wire Coil
0791 Gelatin Kg
8. BOARDS
0002 12 mm thick pre laminated board (Novapan) exterior grade Sqm
0312 Prelaminated board 19 mm thick of approved lamination on both side Sqm
0313 Prelaminated board of approved lamination on one side and balancing white Sqm
colour
0301.a a.Plywood 12 mm thick (Commercial) Sqm
0301.b b.Plywood 19 mm thick (Commercial) Sqm
0301.c c.Plywood 25 mm thick (Commercial) Sqm
0301.d d.Sheet 6 mm thick (Commercial) Sqm
0293 Plain particle board Sqm
0180 Hard board 45 x 45 mm size Sqm
0181 Hard board 600 x 450 mm size Sqm
0955 Pre-moulded asphalt filler board Sqm
2006 12mm plywood Sqm
2007 4mm thick veneer Sqm
2009 19mm Plyboards Sqm
2010 1.5mm Laminate Sqm
2090 5mm PVC sheet Sqm
2099 5mm BS prelam PVC sheet Sqm
2100 5mm SS prelam PVC sheet Sqm
2101 2mm PVC sheet Sqm
9. CEMENT
0084 Cement Quintal
0439 White cement Quintal
1557 Portland Slag Cement (PSC)/ Portland Pozzolona Cement (PPC) Quintal
1558 Ground Granulated blast furnace slag(GGBS) Quintal
10. FLOORING MATERIALS
0088 Chequered mosaic tiles grey 20 mm thick dark shade Sqm
0089 Chequered mosaic tiles light shade 20mm thick Sqm
0090 Chequered mosaic tiles medium shade Sqm
0091 Chequered mosaic tiles white colour Sqm
0110 Cobble stone 60 mm thick Sqm
0111 Cobble stone 75 mm thick Sqm
0116 Cuddapah slab 2.5 cm to 4 cm thick Sqm
0176 Gray colour mosaic tiles Sqm
0213 Light shade mosaic tiles Sqm
0228 Machine cut granite stone slab 40 mm Sqm
0229 Machine polished granite stone slab 20 mm Sqm
0231 marble chips kgs
0234 Marble dust cum
0235 marble powder cum
0237 marble slab 20 mm thick Sqm
0248 metallic floor hardner kgs
0386 shahabad slabs 2.5 cm to 4 cm thick Sqm
0448 white mosaic tiles Sqm
0507 vitrified tiles 10 mm thick 600X600 mm granolite finish Sqm
0508 vitrified tiles 600X600 mm 10 mm thick Sqm
0560 vitrified tiles 900X900 mm 12 mm thick Sqm
0545 20 mm thick hassan green / river pink granite Sqm
0546 ceramic tiles 30X30 cms Sqm
0510 Grout for vetrified tiles kgs
0511 Spacers for Vetrified tiles Nos
0512 Sealer for vetrified tiles Sqm
0515 Prepolished Grey granite 20 mm thick Sqm
0517 20 mm thick Ruby red granite Sqm
0518 20 mm thick grey granite Sqm
0519 20 mm thick Shiva gold granite Sqm
0520 20 mm thick Black granite Sqm
0521 Prepolished black granite 20 mm thick Sqm
0523 Prepolished Water cut grey granite Sqm
0725 Chequerred cement concrete tiles Sqm
0416 Tandur blue slabes 2.5cms to 4 cm thick Sqm
0545 20mm thick Hassan green granite Sqm
2076 Lakared granite Sqm
2085 Sadarahalli flammed granite 40mm Sqm
2086 Sadarahalli pre polished granite 20mm Sqm
2108 Black granite 40mm thick Sqm
11. TILES
0112 Colour glazed tiles 15 x 15 cms 10mm thick Each
0113 White glazed tiles 15 x 15 cms 6mm thick Each
0186 Hersian cloth for using in tiles as reinforcement Sqm
0217 Linolium sheet for tile 30 cmsx30cms Sqm
0464 Yelahanka tiles of size 250x250 mm Each
0481 Mangalore tiles first class and special tile for ridges and hips Nos
0485 Medium shade mosaic tiles Sqm
0486 Ceramic tiles 15 cms x 15 cms Sqm
0444 White glazed tiles 15 cms x 15 cm , 10 mm thick plain Each
0445 Color glazed tiles 15 cm x 15 cm, 10 mm thick anti skid Each
0578 Pre polished grey granite tile 10mm Sqm
0579 Pre polished black granite tile 10mm Sqm
2073 Concrete designer tiles Sqm
2074 Ceramic tiles of 300x 600mm Sqm
2075 Ceramic tiles of 300x 450mm Sqm
2042 Border tiles 30x10cms Each
2043 Glazed tiles 300 x 450 Sqm
2026 Ceramic tiles 400 x 400mm Sqm
12. RMC
0495 Ready Mix Concrete M 20 (1:1.5:3) cum
0496 Ready Mix Concrete M 25 (1:1:2) cum
2200 Ready Mix Concrete M 30 cum
2201 Ready Mix Concrete M 35 cum
2202 Ready Mix Concrete M 40 cum
5000 Ready Mix Concrete M 20 (OPC 50%+GGBS 50%) cum
5001 Ready Mix Concrete M 25 (OPC 50%+GGBS 50%) cum
5002 Ready Mix Concrete M 30 (OPC 50%+GGBS 50%) cum
5003 Ready Mix Concrete M 35 (OPC 80%+GGBS 20%) cum
5004 Ready Mix Concrete M 40 (OPC 85%+GGBS 15%) cum
13. STEEL
0003 18 gauge 75 mm MS laths of 2.8 m length Nos
0004 Z section kgs
0019 Angle iron 40x40x6mm kgs
0087 Channels 25x25x6 mm kgs
0187 High tension coil oxidised MS Each
0203 Hooks oxidised MS 150 mm Each
0221 M.S. flat 30 cmx25mmx3mm kgs
0223 M.S. Round Bright bars 20mm qtl
0224 M.S. Square Bright bars 20mm qtl
0249 Mild steel 6 mm dia kgs
0250 Mild steel bars qtl
0252 MS channels kgs
0255 MS flats 20 mm x 6 mm kgs
0257 MS plates kgs
0258 MS rods kgs
0259 MS sheet 1 mm thick kgs
0260 MS sheet 20 gauge kgs
0262 MS tees kgs
0264 Mullion section (MS) kgs
0288 Pig lead kgs
0414 T section MS kgs
0484 M.S.Shoes kgs
0547 Expanded metal 12.5 mm to 25 mm -14 G Sqm
0714 Bearing plates Tonne
0716 Binding wire kgs
0723 Cast Steel kgs
0724 Cast Steel rocker assembly kgs
0739 Edge beams of steel of special shape and section kgs
0748 Forges Steel (2 rollers) kgs
0756 High Tensile steel wires/strands Tonne
0757 High Tensile strands qtl
0759 ISMC 1002.806x1.05 Tonne
0763 Mild steel qtl
0764 Mild steel anchors kgs
0765 Mild steel matrix including wastage kgs
0766 Mild steel plate(Galvanised) Tonne
0767 MS bars Tonne
0770 MS flats Tonne
0771 Ms gratings 260 mmx 260 mm Each
0777 Pile shoes-Ci kgs
0778 Pile shoes-MS kgs
0792 Stainless steel 304 grade kgs
0862 Mild Steel pipe 100mm dia 2.5mm thick M
0863 Mild Steel pipe 25mm dia 2.5mm thick M
0864 CGI sheets kgs
0865 Angle iron 45x45x5mm Kgs.
0866 M.S sheet 300mm wide,2.5mm long and 2.6mm thick Kgs.
0867 Angle iron 50x50x2mm long Kgs.
0868 M.S sheet of 12 SWG, 3 Nos of 200mm width and 4m length Kgs.
0870 Steel drum 300mm dia 1.2m high/empty Nos.
0940 Mild steel angle iron 75 x 75 x 6mm Kgs.
0941 Mild steel angle iron 75 x 75x 6mm, 2.85 metres long Kgs.
0957 Corrugated sheet, 3mm thicken "W" beam section railing, 4.5m in length. Kgs.
0958 Channel post 150 x 75 x 5mm Kgs.
0959 Channel 150 x 75 x 5 mm Kgs.
0963 Structural steel in plates, angles, Galvanised structural steel plate Tonne
etc.,including 5% wastage
0972 RS joist 100 x 75mm Kgs.
0973 Struts - 2 Nos. for terminal posts, 2m long each 2 x 2 x 11.50 Kgs.
0974 Tie 2 Nos. of 8mm steel plate, 1.5sqm each for terminal posts at Kgs.
62.80kg/sqm(2x1.5)
0975 Steel wire rope 40mm Kgs.
0976 Mild steel pipe 25mm dia, 2.5mm thick M
0977 MS sheet for 600 x 300 x3mm rectangular vane, one number at 24 kg/sqm Kgs.
0978 MS sheet for 250mm dia circular vane 3mm thick, 4 number at 24 kg/sqm Kgs.
0979 MS sheet 3mm thick at 24kg/sqm Kgs.
0981 Galvanised angle sections 100mm x 10mm of 12mm thickness weldable Kgs.
structural steel as per IS:2062.2 Nos. of 12m length each at 17.7 kg/m
0988 Helical pipes 600mm diametre M
0989 Tie rodes 20mm diametre Kgs.
1100 Steel circular hollow pole of standard specification for street lighting to mount Each
light at 9m height above road level.
1510 Tube anchorage set complete with bearing plate, permanent wedges etc. No.
1512 Bearing No.
1513 Bearing rocker & Roller No.
1516 Sheating duct ID 66mm Tonne
1519 32mm mild steel dowel bars of grade s240 Tonne
1520 16mm deformed steel tie bars fo grade S 415 Tonne
1534 20 x 5 mm diaganals Kgs.
1553 Cast steel rocker bearing assembly of 250 tonne design load capacity duly Nos.
painter complete with all leads components as per drawing and specifications

1554 PTFE sliding plate bearing assembly of 80 t. design load capacity duly painted Nos.
complete with all its components as per drawing & technical specification.

0558 MS angles 65 X 65 X 6 mm 34.7 Kgs Kgs.

0562 38 mm dia of 14 guage MS black pipe M
0561 20 mm dia hold fast Rod Nos.
0571 Stainless steel strips M
0573 M S Clamps for Shoe Kgs.
0576 Steel column 400x250 mm (ISHB Series) Tonne
0577 Forged steel rollar bearing of 250 tonne No.
1103 Steel circular Hollow pole of standard specification for street lighting to mount Each
light at 5m height above road level.
2022 MS flat 12x75mm kgs
2021 M S Tubes kgs
2027 50mm dia M.S. Hollow pipe B Class 14 Gauge kgs
2028 20mm x 20mm vertical M.S. Square Rod kgs
2015 Gusset plates 6mm thick kgs
2016 Base plate/ base plate kgs
2018 Anchor Bolts 750mm No.
2029 12x12 M.S. Square Bright Rod kgs
2030 16x16mm M.S. Square Rod kgs
2031 40x6mm M.S. Flat kgs
2032 12mmx6mm M.S. Flat kgs
2033 Cast iron spike Nos.
2034 50x50 M.S. Hollow pipe kgs
2036 36mm x 6mm M.S. Flat kgs
2038 Stainless steel hollow pipes 14 gauge 50mm dia. kgs
2039 Stainless steel hollow pipe 14 gauge 25mm dia. kgs
2040 5" dia 5mm thick M.S. plate Nos.
2067 MS pipes of 80mm to 100mm dia kgs
2068 RMS Gusset plate kgs
2078 Stainless steel tubes 40mm, 14 gauge kgs
2091 M.S. Tube M
0489 M.S. 20mm Square bar qtl
0949 MS angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg pe metre kgs

0950 MS angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre. kgs

0951 Runner flat 50 x 5mm kgs

0952 Welded steel with fabric 75 x 50mm mesh at 4kg/ sqm, 4 x 30 x 1.2+5% kgs
wastage
0953 Steel pipe 50mm external dia as per IS:1239 2.5mm thick M
0954 Medium wt. steel channel (ISMC Series) 100mm x 50mm,10.8 metre length at kgs
9.2 kg per m
14. WOOD WORK
0115 Corner beads 45x45 mm M
0190 honne wood cum
0191 honne wood beading 10 mm wide M
0193 honne wood beading 20x20 mm M
0194 Honne wood scantling cum
0195 Honne wood scantling for styles and rails 30mm thick cum
0196 Honne wood scantling for styles and rails 35mm thick cum
0198 Honne wood planks for shutters(frame) 35mm thick cum
0200 Honne wood planks for panels 20mm thick cum
0201 Honne wood battens cum
0202 Honne wood beads cum
0205 Jungle wood battens 25mm x 40mm cum
0206 Jungle wood battens 50mm x 40mm cum
0207 Jungle wood runners and planks cum
0208 Jungle wood runners and planks cum
0209 Jungle wood scantling cum
0238 mathi or Nandi wood cum
0239 mathi or Nandi wood planks for panels 20mm thick cum
0240 mathi or Nandi wood scantlings for styles and rail 25mm thick cum
0241 mathi/Nandi wood cum
0242 mathi/Nandi wood battens cum
0243 mathi/Nandi wood beadings 10mm wide M
0244 mathi/Nandi wood planks for panels 25mm thick cum
0245 mathi/Nandi wood scantling cum
0246 mathi or Nandi wood scantlings for styles and rails 30mm thick cum
0266 Nandi wood reepers 50x25 mm M
0269 NUWUD (MDF) panel filling 19 mm thick Sqm
0286 Panel filled with NUWUD (MDF) board 12 mm thick Sqm
0294 planks for filling Sqm
0332 Sal wood cum
0333 Sal wood battens cum
0389 silver oak or equivalent planks 38 mm thick cum
0417 Teak wood - superior grade cum
0418 Teak wood beading 10mm wide M
0419 Teak wood beading 20x20 mm M
0421 Teak wood gutties Big Each
0422 Teak wood planks for panels 25 mm thick cum
0423 Teak wood reepers 50x25 mm M
0424 Teak wood scantling for styles and rails 30mm thick cum
0425 Teak wood scantling for styles and rails 35mm thick cum
0426 Teak wood beads cum
0429 TW beading for fixing glass M
0463 Wooden strips of I class teak wood (25 mm/6mm) 4mtr. Long Each
0490 Jungle wood reepers 50x25 mm M
0706 25mm thick silver oak planks Sqm
0798 Wooden blocks Nos
0462 Wooden cleats Each
0080 Casuarina bellies 75 to 100 mm dia M
0081 Casuarina poles 100 to 150 mm M
0082 Casuarina poles 75 to 100 mm dia M
0869 Jungle wood cum
0872 Wooden staff for fastening of flag 25mmdia, one m long Each
0961 Wooden ballies 8"dia & 9m long No.
0962 Wooden ballies 2"dia for bracing M
2002 50x35mm salwood crunnel cum
2003 Teakwood gutties Small Nos.
2011 Teak wood beading 10mm wide M
15. GLASS
0006 5.5mm thick plain glass Sqm
0170 Glass shelf 600x120mm with guard rail Each
0171 Glass strips 40mm width,4 mm thick Sqm
0172 Glazing clips kgs
0467 4mm thick plain glass Sqm
0324 Reeded glass 2 mm thick Sqm
0325 Reeded glass 3 mm thick Sqm
0538 Imported glass 6 mm thick Sqm
2012 12mm thick plain tuffened glass Sqm
2014 12mm thick frosted toughened glass Sqm
2071 Glass etching Sqm
16. FIXTURES
0005 25 mm dia pulley (for alluminum sliding door) Each
0011 Aluminium handles - 15mm Each
0012 Aluminium hinges 75 mm length Each
0038 Bottom lock nail Each
0046 Brass screws 25 mm Each
0085 Center pulley Each
0086 Central ball bearing Each
0107 Cleat angles Each
0133 Door closure heavy duty floor mounting Each
0134 Door lock Each
0177 Gusset plates 3.15 mm thick kgs
0178 Handles power coated 150 mm Each
0179 Handles to full width 2m long Each
0188 Hinges 5" heavy duty Each
0189 Hold fasts MS Each
0220 Locking arrangments Each
0222 M.S. holder bat clamp 32mm Each
0225 M.S stays and clamps for 200 mm length including bolts and nuts Each
0226 M.S stays and clamps for 50 mm length including bolts and nuts Each
0227 M.S stays and clamps for 75 mm length including bolts and nuts Each
0253 MS clamps Each
0254 MS cleats with bolts and nuts to rest on pile Each
0256 MS handles oxidised 150 mm Each
0261 MS side shed clamps Each
0265 Nail and screws kgs
0314 Pulleys 38 mm dia Each
0326 Reeper nails 50 mm long kgs
0384 Screws 40 mm Each
0388 Side guides Each
0399 Stays (MS) Each
0427 Tower bolt 300 mm long Each
0474 Pivots Nos
0540 Screws Nos
0537 Box cleats Nos
0541 Anchor Bolts Nos
0542 Galvanized L brackets Nos
0708 Steel inserts with stainless steel bolts and nuts kgs
0719 Bolts and nuts kgs
0768 MS bolts, nuts and washers Tonne
0710 Anchorages Each
0711 Anchor loops (IS 2062) Each
0712 Anchor plates (IS 2062) Each
0713 Anchorage sets Each
0094 Chrominum plated screw -25mm Each
0167 Gl 'j' or 'L' hook with nuts and bolts 8mm dia Each
0291 Pintels including welded pins Each
0492 C.P brass brackets Pair
2084 Hydraulic door clouser - aluminium body No.
17. PAINTINGS
0015 Aluminium paint L
0016 Aluminium paint primer (red oxide) L
0020 Anticorrosive bitumastic paint L
0033 Black Japan paint L
0131 Dark shade pigment kgs
0132 Distemper primer L
0136 Dry Distumper kgs
0137 Enamel metal paint L
0138 Enamel primer L
0214 Light shade pigment kgs
0247 Medium shade pigment kgs
0285 Paint remover L
0289 Pigment kgs
0290 Pink primer paint L
0300 Plastic emulsion paint L
0320 Ready mix primer paint L
0321 Ready mix red lead paint L
0323 Red oxide kgs
0430 undercoat flatting varnish L
0431 Unslaked lime qtl
0432 Varnish L
0433 Wall paint L
0435 Water proof cement paint kgs
0438 Wax polish kgs
0271 Oil bound distemper kgs
0428 Turpentine Oil L
0543 Anodized M R F painting Sqm
0447 White lead paint for priming L
0461 Whitener kgs
0775 Paint I quality(synthetic enamel paint) L
0776 Pigment kgs
0784 Road marking paint L
0779 Primer L
0173 Gopi powder kgs
0218 Linseed oil L
0219 Liquid wood filler L
0524 Sand paper Dozen
0525 50 size sand paper Dozen
0526 36 size sand paper Dozen
0569 Primer Kgs.
0528 Wax kgs
0529 Sealer Coat L
0530 Melamione Patty kgs
0531 Melamione polish L
0532 Thinner L
0543 Anodized M R F painting Sqm
1504 Epoxy resin hardener mix for primne coat kgs
2044 Light House Polish L
2045 Texture material kgs
2046 Antifungal paint L
2050 Textured based white cement kgs
2060 Soap powder kgs
2081 Wiping cloths Each
2083 Soap oil / Phenol L
2092 Solvent cement adhesive L
0995 Water based paint for cement concrete surface L
18. PIPES
0021 Asbestos cement pipes 75 mm dia of length 2 mtrs Each
0095 CI Bends 100 mm dia Each
0096 CI Bends 75 mm dia Each
0097 CI Bends 90 mm dia Each
0098 CI heads 100 mm dia Each
0099 CI pipes 100 mm dia of 1.8m length Each
0100 CI pipes 75 mm dia of 1.8m length Each
0101 CI shoes 100 mm dia Each
0102 CI shoes 110 mm dia Each
0103 CI shoes 75 mm dia Each
0146 G.I. Overflow pipe 20mm dia M
0147 G.I. Pipe 100 mm dia B class M
0148 G.I. Pipe 150 mm dia B class M
0149 G.I. Pipe 15 mm dia B class M
0150 G.I. Pipe 20 mm dia B class M
0151 G.I. Pipe 25 mm dia B class M
0152 G.I. Pipe 32 mm dia B class M
0153 G.I. Pipe 40 mm dia B class M
0154 G.I. Pipe 50 mm dia B class M
0155 G.I. Pipe 65 mm dia B class M
0156 G.I. Pipe 80 mm dia B class M
0157 G.I. Tee 32mm Each
0158 G.I. Tee 65mm Each
0169 GI washers Each
0182 HDPE 110mm dia, 4Kg/sqcm M
0183 HDPE 110mm outer dia, 2.5Kg/sqcm M
0184 HDPE 90mm outer dia, 4Kg/sqcm M
0185 HDPE 90mm outer dia, 2.5Kg/sqcm (rain down water pipes) M
0212 P.V.C. Lead connection pipe 32 mm dia (for wash basin) Each
0303 Polythylene pipes high density 32mm external dia M
0304 Polythylene pipes high density 40mm external dia M
0305 Polythylene pipes high density 50mm external dia M
0306 Polythylene pipes high density 20mm external dia M
0307 Polythylene pipes high density 25mm external dia M
0308 Polythylene pipes high density 32mm external dia M
0309 Polythylene pipes high density 40mm external dia M
0310 Polythylene pipes high density 50mm external dia M
0335 Sand cast iron bend 100 mm dia with access door, washers, bolts and nuts Each

0336 Sand cast iron bend 50 mm dia with access door, washers, bolts and nuts Each
0337 Sand cast iron bend 75 mm dia with access door, washers, bolts and nuts Each
0338 Sand Cast iron pipe 100 mm dia 1.8m length Each
0339 Sand Cast iron pipe 50 mm dia 1.8m length Each
0340 Sand Cast iron pipe 75 mm dia 1.8m length Each
0342 Sand Cast iron plain bend 50 mm dia Each
0344 Sand Cast iron soil waste 114mm offsets 3" dia Each
0345 Sand Cast iron soil waste 152mm offsets 3" dia Each
0346 Sand Cast iron soil waste 230mm offsets 3" Each
0347 Sand Cast iron soil waste double equal invert plain branches of required Each
degree '100x100x100x100mm
0348 Sand Cast iron soil waste double equal invert plain branches of required Each
degree '50x50x50x50mm
0349 Sand Cast iron soil waste double equal invert plain branches of required Each
degree '75x75x75x75mm
0350 Sand Cast iron soil waste double equal junction of required degree Each
'100x100x100x100mm
0351 Sand Cast iron soil waste double equal junction of required degree Each
'50x50x50x50mm
0352 Sand Cast iron soil waste double equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 100x100x100x100mm
0353 Sand Cast iron soil waste double equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 100x100x50x50mm
0354 Sand Cast iron soil waste double equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 100x100x75x75mm
0355 Sand Cast iron soil waste double equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 75x75x75x75mm
0356 Sand Cast iron soil waste double equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 75x75x50x50mm
0357 Sand Cast iron soil waste double unequal invert plain branches of required Each
degree '100x100x75mm
0359 Sand Cast iron soil waste double unequal invert plain branches of required Each
degree '100x100x75x75mm
0360 Sand Cast iron soil waste double unequal invert plain branches of required Each
degree '75x75x50mm
0361 Sand Cast iron soil waste double unequal invert plain branches of required Each
degree '75x75x50x50mm
0362 Sand Cast iron soil waste double unequal junction of required degree Each
'100x100x50x50mm
0363 Sand Cast iron soil waste double unequal junction of required degree Each
'100x100x75x75mm
0364 Sand Cast iron soil waste double unequal junction of required degree Each
'75x75x50x50mm
0365 Sand Cast iron soil waste single equal invert plain branches of required degree Each
'100x100x100x100mm
0366 Sand Cast iron soil waste single equal invert plain branches of required degree Each
'50x50x50x50mm
0367 Sand Cast iron soil waste single equal invert plain branches of required degree Each
'75x75x75x75mm
0368 Sand Cast iron soil waste single equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 75x75x75mm
0369 Sand Cast iron soil waste single equal junction of required degree with access Each
door ' 100x100x100mm
0370 Sand Cast iron soil waste single equal junction of required degree with access Each
door ' 50x50x50mm
0371 Sand Cast iron soil waste single equal junction of required degree with access Each
door ' 75x75x75mm
0372 Sand Cast iron soil waste single equal junction of required degree with access Each
'door, rubber washers bolts and nuts, ' 100x100x100mm
0373 Sand Cast iron soil waste single equal junction of required degree with access Each
'door, rubber washers bolts and nuts, ' 50x50x50mm
0374 Sand Cast iron soil waste single unequal junction of required degree Each
100x100x50mm
0375 Sand Cast iron soil waste single unequal junction of required degree Each
100x100x75mm
0376 Sand Cast iron soil waste single unequal junction of required degree Each
75x75x50mm
0377 Sand Cast iron soil waste single unequal junction of required degree with Each
access 'door, rubber washers bolts and nuts, 100x100x50mm
0378 Sand Cast iron soil waste single unequal junction of required degree with Each
access 'door, rubber washers bolts and nuts, 100x100x75mm
0379 Sand Cast iron soil waste single unequal junction of required degree with Each
access 'door, rubber washers bolts and nuts, 750x75x50mm
0380 Sand Cast iron soil waste double equal junction of required degree with access Each
'door, rubber washers bolts and nuts, 50x50x50x50mm
0381 Sand cast iron trap 100mm dia Each
0382 Sand cast iron trap 50mm dia Each
0383 Sand cast iron trap 75mm dia Each
0393 Special for overflow pipe Each
0402 Stoneware pipes 100mm dia 60 cms long Each
0403 Stoneware pipes 150mm dia 60 cms long Each
0404 Stoneware pipes 200mm dia 60 cms long Each
0405 Stoneware pipes 230mm dia 60 cms long Each
0406 Stoneware pipes 250mm dia 60 cms long Each
0407 Stoneware pipes 300mm dia 60 cms long Each
0408 Stoneware pipes 350mm dia 60 cms long Each
0409 Stoneware pipes 400mm dia 60 cms long Each
0410 Stoneware pipes 450mm dia 60 cms long Each
0476 100 mm dia asbestos dia cement pipe of length 2 mtrs Each
0477 110 mm outer dia 2 kg/sqcm pressure pipe of approved make (PVC) M
0478 110 mm outer dia 2.5 kg/sqcm pressure pipe of approved make (PVC) M
0479 90 mm outer dia 2kg/sqcm pressure pipe of approved make (PVC) M
0493 Sand cast iron soil waste double equal junction of required degree, M
75x75x75x75 mm
0534 M S Square pippe 16 G Black pipe Kg
0702 100 mm asbestos cement pipes M
0703 100 mm dia 1 m long GI pipe M
0755 HDPE pipes-90 mm dia M
0782 RCC pipes NP3 1200 mm dia including collars M
0783 RCC pipes NP3 900 mm dia including collars M
0821 RCC pipes NP3 300 mm dia including collars M
0822 RCC pipes NP3 450 mm dia including collars M
0823 RCC pipes NP3 600 mm dia including collars M
0824 RCC pipes NP3 750 mm dia including collars M
0825 RCC pipes NP2 300 mm dia including collars M
0826 RCC pipes NP2 450 mm dia including collars M
0827 RCC pipes NP2 600 mm dia including collars M
0828 RCC pipes NP2 750 mm dia including collars M
0829 RCC pipes NP2 900 mm dia including collars M
0830 RCC pipes NP2 1200 mm dia including collars M
0831 RCC pipes NP4 900 mm dia including collars M
0832 RCC pipes NP4 1200 mm dia including collars M
0565 RCC pipes NP2 150 mm dia including collars M
0566 RCC pipes NP2 250 mm dia including collars M
0911 RCC pipes 200mm dia, 2.5m long for drainage M
0929 Plastic tubes 50cm dia, 1.2m high Nos.
0568 RCC NP 4 100 mm dia including collars M
19. WATER SUPPLY
0001 100mm 'S' or 'P' trap Each
0023 Bevel lead mirror of superior glass of size 600x450mm Each
0024 Bib cock 15mm nominal bore-NP Each
0025 Bib cock 20mm nominal bore-NP Each
0026 Bib cock 25mm nominal bore-NP Each
0027 Bib cock 32mm nominal bore-NP Each
0028 Bib cock 40mm nominal bore-NP Each
0029 Bib cock 50mm nominal bore-NP Each
0034 black plastic seat and lid as specified Each
0040 Brass ball vlave with plastic float 15mm nominal bore Each
0041 Brass ball vlave with plastic float 20mm nominal bore Each
0042 Brass ball vlave with plastic float 25mm nominal bore Each
0043 Brass ferrule and C.1 Mouth cover 15mm nominal bore Each
0044 Brass ferrule and C.1 Mouth cover 20mm nominal bore Each
0045 Brass ferrule and C.1 Mouth cover 25mm nominal bore Each
0047 Brass shower rose C.P 100mm dia Each
0048 Brass shower rose C.P 150mm dia Each
0049 Brass stop cock-15mm Each
0050 Brass union 15mm nominal bore with PVC connection pipe 300mm length Each
Each
0051 Brass union 15mm nominal bore with PVC connection pipe 450mm length Each
0052 Brass union 20mm nominal bore with PVC connection pipe 300mm length Each
0053 Brass union 20mm nominal bore with PVC connection pipe 450mm length Each
0067 C.I manhole cover with frame 610x455mm size (38 Kgs) Each
0068 C.I/M.S. brackets for flushing cistern Pair
0069 C.I Cover 500mm dia -50mmthick(16Kgs) Each
0070 C.P brass chain plug Each
0071 C.P brass chain with stainless steel plug Each
0072 C.P.brass pillar tap elbow operated Each
0073 C.P. brass screws 25mm with washers Each
0074 C.P.brass towel rail 600mm length 20mm dia Each
0075 C.P.brass towel rail 740mm length 20mm dia Each
0076 C.P.brass waste union 32mm of standard pattern Each
0077 C.P.brass waste union 40mm with fittings Each
0079 Cast iron foot rest Each
0105 Circular shape mirror of size 450mm dia with plastic moulded frame Each
0114 Copper plated brass piller tap Each
0117 Gun metal non-return valve 100mm nominal bore horizontal type Each
0118 Gun metal non-return valve 100mm nominal bore verticall type Each
0119 Gun metal non-return valve 25mm nominal bore horizontal type Each
0120 Gun metal non-return valve 25mm nominal bore vertical type Each
0121 Gun metal non-return valve 32mm nominal bore horizontal type Each
0122 Gun metal non-return valve 32mm nominal bore vertical type Each
0123 Gun metal non-return valve 40mm nominal bore horizontal type Each
0124 Gun metal non-return valve 40mm nominal bore vertical type Each
0125 Gun metal non-return valve 50mm nominal bore horizontal type Each
0126 Gun metal non-return valve 50mm nominal bore vertical type Each
0127 Gun metal non-return valve 65mm nominal bore horizontal type Each
0128 Gun metal non-return valve 65mm nominal bore vertical type Each
0129 Gun metal non-return valve 80mm nominal bore horizontal type Each
0130 Gun metal non-return valve 80mm nominal bore vertical type Each
0139 Europian type water closet of specified make Each
0143 G.I 32mm dia telescopic flush pipes with fittings/specials Set
0144 G.I.Flush pipe of standard size and C.P brass spreaders,brass unions and Set
clamps 'including fittings
0145 G.I jam nut Each
0159 Gate valve 15mm nominal bore-gun metal Each
0160 Gate value 20mm nominal bore-gun metal Each
0161 Gate value 25mm nominal bore-gun metal Each
0162 Gate value 32mm nominal bore-gun metal Each
0163 Gate value 40mm nominal bore-gun metal Each
0164 Gate value 50mm nominal bore-gun metal Each
0165 Gate value 65mm nominal bore-gun metal Each
0166 Gate value 80mm nominal bore-gun metal Each
0204 indian type water closet of size 580 mm of specified make with footrests Each
0273 Orissa pattern of size 575x425 mm with integal type foot rests Each
0274 Oval shape mirror of size 450x350 mm with plastic moulded frame Each
0275 P.V.C automatic flushing cistern 7.5 litres with fittings Each
0276 P.V.C automatic flushing cistern with fittings 10 litres Each
0277 P.V.C automatic flushing cistern with fittings 15 litres Each
0278 P.V.C flushing cistern 10 litres low level with accessories 40mm flush pipe Each
0279 P.V.C pipes unplasticised 16mm M
0280 P.V.C pipes unplasticised 20mm M
0281 P.V.C pipes unplasticised 25mm M
0282 P.V.C pipes unplasticised 32mm M
0283 P.V.C automatic flushing cistern 5 litres with fittings Each
0284 P.V.C flushing cistern 10 litres low level with fittings Each
0411 stop cock Each
0434 water meter Each
0302 Polyethylene water storage tank of specified capacity and make L
0322 Rectangulur shape mirror of size 1500x450mm with drain board of specific Each
make
0396 Stainless steel kitchen sink of size 400x470mm with drain board of specific Each
make
0397 Stainless steel kitchen sink of size 500x1000mm with drain board of specific Each
make
0398 Stainless steel kitchen sink of size 510x1575mm with drain board of specific Each
make
0440 White glazed fire clay kitchen sink of size 600x450x250mm Each
0441 White glazed fire clay kitchen sink of size 750x450x250mm Each
0442 White glazed fire clay laboratory sink of size 450x300x150mm Each
0443 White glazed fire clay laboratory sink of size 600x450x200mm Each
0446 White glazed/vitreous china clay 10 lts low level flushing cistern, with fittings Set
and \brakets and 40mm white C.P flush pipe
0449 White vitreous china clay angle back wash basin size 500x400mm Each
0450 White vitreous china clay angle back wash basin size 600x480mm Each
0451 White vitreous china clay flat back lipped front urinal basin of 430x260x350mm Each
size
0453 White vitreous china clay flat back large urinal basin size 580x380x350mm Each

0454 White vitreous china clay flat back wash basin size 450x330mm Each
0455 White vitreous china clay flat back wash basin size 550x400mm Each
0456 White vitreous china clay flat back wash basin size 630x450mm Each
0457 White vitreous china clay squatting plate Each
0458 White vitreous china clay surgeon type wash basin size 660x450x265mm Each
0460 White vitreous china clay wall corner type, lipped front urinal basin of size Each
'340x410x265mm
0487 C.P. brass tap with union Each
0491 Rectangulur shape mirror of size 453x357mm with plastic moulded frame Each
0546 ceeramic tiles of size 30x30cms Sqm
2035 Colour Glazed tiles 30x60cms 6mm thick Each
2096 L. Bracket Nos.
0542 Galvanized L brackets Nos
2079 Granite sink 23cm thick Each
2098 Rubber Gaskete M
20. MISCELLANEOUS
0083 Caustic soda kgs
0092 Chiken mesh Sqm
0168 GI plaster mesh 0.35 mm thick 10 cms wide M
0251 Mosquito proof coupling 25 mm Each
0295 Plaster mesh 100mm wide M
0296 Plaster mesh 150mm wide M
0297 plaster mesh 200mm wide M
0318 Rabbit wire mesh Sqm
0548 Weld Mesh 75mmx25mm of 6G to 10G Sqm
0549 Weld Mesh 75x50mm of 6G to 10G Sqm
0729 Copper plate 12 m long x 250 mm wide kgs
0796 Wire create size(1.8x1.8mx0.9m)=2.916(4mm dia 2GI wire in 15 cms x 15 cms kgs
mesh)
0797 Wire mesh 50 mm x 50 mm Sqm
0816 Form work for kerb stone/KM stone Sqm
0104 Cinder ballast cum
0093 Chlorophriphos emulstiable concentrate L
0065 Burnt lime/shell lime qtl
0141 Fly ash cum
0142 Fuel (firewood) qtl
0210 Kerosene oil L
0215 Lime cum
0216 Lime surkhi mortar 1:2 cum
0263 Mud mortar cum
0267 Nitric Acid L
0299 Plaster of Paris kgs
0394 Spirit L
0412 Surkhi cum
0436 Water proofing compound kgs
0709 Admixture/Super Plasticizer L
0715 Bentonite Tonne
0741 Epoxy for mortar kgs
0742 Epoxy for tack coat kgs
0743 Epoxy material for fixing kgs
0760 Joint filler (0.01 cm wide and 0.12mm wide) Sqm
0761 Joint sealing com 25 mm deep kgs
0811 Chloroperene C.C.
0812 Natural Rubber C.C.
0813 Neoprene kgs
0818 Water KL
0268 Nortlight adjustable ridges of 1.22m Pair
0270 Nylon rollers Each
0315 Putty for filling holes kgs
0319 Rawl Plug 40 to 50mm Each
0317 PVC Beading M
0328 Roofing felt type-2 grade-1 fibre based self finish and bitumen based Sqm
0329 Rubber heading for shutturs beading M
0392 Spun yarn kgs
0413 Suspension shaft M
0516 Plastic sheet Sqm
0527 Steel wool Pack
0535 Glazing seal M
0536 Weather Seal Nos
0539 Specer tape Sqm
0704 20mm thick compressible fiber band 12 m long x 25 cm deep Sqm
0705 20 mm thick filler 12m long x 25 cm deep Sqm
0737 Deviator Plates Tonne
0740 Elastomeric slab with MS plates inserted inside polysulphine compound filling C.C.
Space around Bolts and nuts
0774 Nipples Each
0788 Sheething duct ID M
0809 PTFE Nodules Sq.Cm
0810 PTFE Nodules cm
0331 S.F.R.C. Cover and frame 560 mm (ID) heavy duty Each
0850 Fine Grass Kgs.
0851 Hedge plant Each
0852 Flowring plants Each
0853 Shrubs Each
0854 Sapiling 2m high 25mm dia Each
0855 Neem cake qtl
0856 Empty bitumen drum Each
0857 Rivets Each
0858 Steel wire 3mm dia kgs
0859 Sapling 1 to 1.5m high 2cm dia stem Nos.
0861 Traffic cones with 150mm reflective sleeve Nos.
0871 Flag of red color cloth 600x600mm Each
0900 Supply of quarried stone 150-200 size cum
0901 Stone boulder of size 150mm and below cum
0910 Precast cement concrete tiles Tiles size 300x300mm and 25mm thick Nos.
1104 Jute Rope M
0925 cold miling machine at 20cum per hour cum
0927 Scrap types of size 900x20 Nos.
0928 20mm steel wire rope Kgs.
0933 Geotextile filter frabic Sqm.
0934 perforated geosynthetic pipe 150mm dia M
0935 Paving fabric Sqm.
0936 Geogrids Sqm.
0937 Connectors/staples Each
0938 Polymer braids M
0945 Hot applied thermoplatic compound L
0946 Reflectorising glass beads Kgs.
0947 Cost of approved type of delineators from ISI certified firm as per the standard Each
drawing given in IRC:79
0948 Barbed wire 335 metre length at 9.38 kg per 100 metre Kgs.
0960 Sand bags(cost of sand in empty cement bag) No.
0964 Admixture Kgs.
0966 M 35 grade RCC corbel provided for supporting of euipment cum
0971 NUTS AND Bolts Kgs.
0980 Elastomeric slab seal expansion joint assembly manufactured by using M
chloroprene, elastomer for elastomeric slab unit conforming to clause 9150.1
of IRC:83 (part II) conforming to clause 2600.6 of Morth specifications.

0982 Preformed continuous chloroprene elastoemer or closed cell foam sealing M

sealing element with high mtear strength vulcanised in a single operation for
the full length of a joint ot ensure water tightness.
0983 Supply of complete assembly of strip seal expansion joint comprising of edge M
beams, anchorage, strip seal element and complete accessories as per
approved specifications and drawings
0984 Supply of a modular strip/box seal joint assembly comprising of edge beams, M
central beam, 2 modules chloroprene seal, anchorage elements, support and
control system, all steel sections protected against corrision and installed by
the manufacturer or his
0985 Supply of a modular/box/box seal joint assembly containing 3 modules/cells M
and comprising of edge beams, two central beams, chloroprene seal,
anchorage elements, support and control system, all steel sections protected
against corrosion and installed by t
0986 LDO L
0990 Farmyard manure cum
0991 Seeds Kgs.
0992 Jute netting Sqm
0994 Doob grass Kgs.
0997 Accelerator compound for guniting Kgs.
0998 Wire mess 50mm x 50mm size of 3mm wire Kgs.
1101 Sodium vapour lamp - 250 watt Each
1502 Pre - packed ploymer concrete based on epoxy system complete with curing Kgs.
compound, intiator and promoter
1505 Quick setting compound Kgs.
1507 Acrylic polymer bonding coat L
1508 Pre-packed cement based ploymer mortar of strength 45 Mpa at 28 days Kgs.
1509 Epoxy resin with pot life not less than 60-90 minutes and satisfying testing as Kgs.
per clause 2800.3.9
1514 bearing Neoprene No.
1521 Separation membrane of impermeable plastic sheeting 125 micron thick Sq.Cm
1522 Pre-moulded joint filler, 25mm thick for expansion joint Sq.Cm
1523 Joint sealant Kgs.
1524 Sealant Primar Kgs.
1525 Curing compound L
1526 Super plasticizer admixture IS marked as per 9-103-1999 at 0.5% by wt. of Kgs.
cement
1552 Collar for AC pipe (average) Nos,
1555 Elastomeric bearing assembly consting of 7 layers of elastomer bonded to 6 Nos.
nos. reinforcing steel laminates by the process of vulcanisation, complete with
all components as per drawings and technical specifications.

1556 Pot type bearing consisting of a metal piston supported by a disc,PTFE pads Nos.
providing sliding surfaces against stainless steel mating together with cast
steel assemblies/ fabricated structural steel assemblies duly painted with all
components as per clause 2006 and complete as per drawings and technical
specifications
0547 Expanded metal 12.5 mm to 25 mm -14 G Sqm
0549 Weldmesh 75 x 50mm of 6g x 10g Sqm
0552 Pesticide L
0553 Granite slabs 7.5 cm to 8 cm thick Sqm.
0559 15 mm bolt Nos.
0560 60 x 60 x10 Guage sq.plate washer Kgs.
0570 Sealant Kgs.
0563 PVC Storage Tank L
0564 12x12 guage GI wire 100 mtr at Ts. 8.00/m M
0574 Steel Helmet and Cushion block Kgs.
0930 Geonets Sqm
0931 Geomembrane Sqm
0932 Geotextile Sqm
2001 Carbon electrodes CC
2004 Screws 3.5" Nos.
2005 Screws 1.75" Nos.
2013 Latch, Pivot, Locking arrangements, SS door rails etc for glass doors Set
2023 Cast iron ornamental design Nos
2024 Cast iron arrows No
2025 Expansion bolt No
2052 Coconut Broom stick No.
2053 Bombay broom stick No.
2054 Squeezer / wiper / rubber brushes No.
2055 Coir brushes No.
2056 Bamboo baskets No.
2057 Plastic buckets 20 L capacity No.
2058 Trollies No.
2064 Cobble stone 65mm thick Sqm
2065 Cobble stone 80mm thick Sqm
2072 Welding rods Nos
2037 Ball beaing hinges heavy duty Nos.
2041 G.I. Coated expansion bolts Nos.
2048 Ball Joints kgs
2049 Design-Trowel Nos.
2059 Hose pipe 30m length No.
2061 Plastic Mug Each
2063 Bleaching Powder kgs
2066 Bronze multiwall polycorbonate G.E. make kgs
2070 Sealent taps Joint
2080 Mop stick - alluminium No.
2082 Disposable garbage bags size 0.9m x 1.5m Each
2087 RBI Grade 81 Tonne
2088 Safe and Easy/Equivalent Bio-degradable L
2093 Polymeric expansion joints filler - 12mm thick Sqm
2094 Polymeric expansion joints filler - 18mm thick Sqm
2095 Polymeric expansion joints filler - 22mm thick Sqm
2102 Crystallisation liquid kgs
2103 Isoproof kgs
2104 Acrylic kgs
2105 FCM kgs
2106 Non woven geo textile kgs
2107 Polysulphide /acrylic sealant kgs
2112 Empty Sand / cement bag No.
9001 Gulty Trap No.
2097 5mm Semi finished PVC Sheet Sqm
3001 PVC Pipes 10KG/Sqm 90mm outerdia M
3002 PVC Pipes 10KG/Sqcm 110mm outerdia M
3003 PVC Pipes 10KG/Sqcm 140mm outerdia M
3004 PVC Pipes 10KG/Sqcm 160mm outerdia M
3005 PVC Pipes 10KG/Sqcm 180mm outerdia M
3006 PVC Pipes 10KG/Sqcm 200mm outerdia M
3007 PVC Pipes 10KG/Sqcm 225mm outerdia M
3008 PVC Pipes 10KG/Sqcm 250mm outerdia M
3009 PVC Pipes 10KG/Sqcm 280mm outerdia M
3010 PVC Pipes 10KG/Sqcm 315mm outerdia M
3022 Water less urinal of size 328x319x598mm Each
2203 Galvanised Steel 105 x 50 mm M
2204 Galvanised Steel 20 x 47 mm M
2205 Galvanised Steel 58 x 36 mm M
2206 Galvanised Steel 22 x 20 (FW 66 mm) M
2207 Galvanised "C" Section 12 x 3 M
2208 Float Glass 5 mm Thick Sqm
2212 M.S. Grill Powder Coated 100 mm Pitch Sqm
0221 Galvanised "C" Section 18 x 7 (FW 33 mm) M
2209 Galvanised Steel20 x 24 (FW 33 mm) M
2213 Galvanised Steel 90 x 50 mm M
2214 TMT Bars Fe 500 MT
2215 TMT Bars Fe 550 MT
2216 Maranthi Wood cum
2217 Galvanised Steel 70 x 55 mm M
2218 Galvanised Flymesh Section 20 x 40 mm M
2219 Galvanised Steel Section 48 x 25 mm M
2220 Galvanised Steel (Glass Beading ) 12 x 12 mm M
2221 Mesh (SS 304 Grade) Sqm
2222 Galvanised Steel 72 x 55 mm M
2223 Galvanised Steel Section 48 x 50 mm M
2224 Galvanised Steel Section 46 x 52 mm M
2225 Galvanised Steel Section 46 x 46 mm M
2226 Galvanised Beading Section 18 x 25 mm M
2227 Fly ash bricks of size 22.50 x 10 x 7.5 cm 100 No.
2228 White cement based putty kgs
2250 Vitrifed tiles - 10 mm thick double charged, nano technology size Sqm
800mmx800mm
2251 Vitrifed tiles - 10 mm thick double charged, nano technology size Sqm
1200mmx600mm
3023 Light weight Concrete (Autoclaved aereated cellular)Blocks of size 60 x 20 x Each
15 cm
2252 Solid blocks concrete 40 x 15 x 20 cms 100 No.
3024 Light weight Concrete (Autoclaved aereated cellular)Blocks of size 60 x 20 x Each
10 cm
3025 Light weight Concrete (Autoclaved aereated cellular)Blocks of size 60 x 20 x Each
20 cm
3027 Polymer modified stucco mortar Kg
2257 Sal wood (Red) cum
2229 Precast Hallow blocks (40x20x20 cm) grade 50 100 No.
2280 Solid blocks concrete (40 x 15 x 20 cms) grade 35 100 No.
0580 Raw-silk granite 20mm thick Sqm
2258 Table top 25mm thick PLPB with edge banding Sqm
2259 75mm thick MS CRCA partition with PLPB tiles Sqm
2260 25 mm thick PLPB separator with edge handing Sqm
2261 L clamps No.
2262 Nut and bolt No.
2263 Separator and D-Brackets No.
2264 Cantilever Brackets No.
2265 End table hode on Bracket No.
2266 Corner Hook on Bracket No.
2267 25mm thich front modesty Sqm
2268 25mm thich legs Sqm
2269 Minifix housing No.
2270 Wooden dowels M8x40 No.
2271 M6 screw leg No.
2272 M6 Insert No.
2273 64 mm dia grommet cap No.
2274 50mm thick glass wool Sqm
2275 Wood screws No.
2276 Ahro tape/press putty Bundle
2277 Lipping 1"x 1/4" RMt
2278 Etching of glass Sqm
2279 Patch fittings No.
2281 Pivot No.
2282 Floor machine No.
2283 Locking system No.
2284 SS Door rails Set
2285 25mm treated commercial black board Sqm
2286 Teak wood balls No.
2287 19mm block board vinyl bonded w/p 7'x3' Sqm
9990 Stainless steel 304 grade Each
9991 Stainless steel 304 grade tower bolt plate Each
9992 Stainless steel 304 grade door lock plate Each
9993 Stainless steel 304 grade aldrop pipe Each
9994 MS Vertical bolt of size 1/2 x2 Each
9996 MS Special square nut 4mm Each
9997 4/15 CSK 304 grade stainless steel screws Each
9998 4mm stainless steel hexagonal grade nut Each
9999 PP connector for fixing horizontal and vertical members 35mm dia length Each
0970 Polyurethane foam (PUF) slab 40mm thick average with PU slab density 36+/- Sqm
2 kg/m8
0971 Polyurethane foam (PUF) slab 50mm thick average with PU slab density 36+/- Sqm
2 kg/m8
0972 Polyurethane foam (PUF) slab 60mm thick average with PU slab density 36+/- Sqm
2 kg/m8
0973 Polyurethane foam (PUF) slab 70mm thick average with PU slab density 36+/- Sqm
2 kg/m8
0974 Polymerized plaster reinforced with glass fibre mesh Sqm
0975 Epoxy based bonding adhesive Kg
0976 Polyurethane foam (PUF) spray 40mm thick average with PU slab density Sqm
35+/-5 kg/m8
0977 Polyurethane foam (PUF) spray 50mm thick average with PU slab density Sqm
35+/-5 kg/m8
0978 25mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
0979 50mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
0980 75mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
0981 100mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
0982 12mm thick glass wool with resin bonded slab density 48kgs/ Cum Sqm
0983 25mm thick glass wool with resin bonded slab density 48kgs/ Cum Sqm
0984 50mm thick glass wool with resin bonded slab density 48kgs/ Cum Sqm
0985 25mm thick average resin bonded rock wool slab having density 36+/-5 Sqm
kg/Cum
0986 40mm thick average resin bonded rock wool slab having density 36+/-5 Sqm
kg/Cum
0987 50mm thick average resin bonded rock wool slab having density 36+/-5 Sqm
kg/Cum
0988 65mm thick average resin bonded rock wool slab having density 36+/-5 Sqm
kg/Cum
0989 75mm thick average resin bonded rock wool slab having density 36+/-5 Sqm
kg/Cum
0990 100mm thick average resin bonded rock wool slab having density 36+/-5 Sqm
kg/Cum
0991 60mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
0992 70mm thick extruded polystyrene (XPS) thermal insulating boards Sqm
0993 Polyurethane foam (PUF) spray 60mm thick average with PU foam Sqm
0994 Polyurethane foam (PUF) spray 70mm thick average with PU foam Sqm
0995 50mm thick thermal insulation of roofing with expanded polystyrene Sqm
0996 70mm thick thermal insulation of roofing with expanded polystyrene Sqm
0997 90mm thick thermal insulation of roofing with expanded polystyrene Sqm
0998 110mm thick thermal insulation of roofing with expanded polystyrene Sqm
0999 120mm thick thermal insulation of roofing with expanded polystyrene Sqm
1000 Thermal insulation of roofing with expanded polystyrene (50mm thick) with Sqm
aluminium strips
1001 Thermal insulation of roofing with expanded polystyrene (70mm thick) with Sqm
aluminium strips
1002 Thermal insulation of roofing with expanded polystyrene (90mm thick) with Sqm
aluminium strips
1003 Thermal insulation of roofing with expanded polystyrene (110mm thick) with Sqm
aluminium strips
1004 Thermal insulation of roofing with expanded polystyrene (120mm thick) with Sqm
aluminium strips
1005 25mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1006 40mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1007 50mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1008 65mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1009 75mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
1010 100mm thick rock wool with resin bonded slab density 48kgs/ Cum Sqm
Basic Rate

177.97
25.42
63.53
152.54
21.19
190.68
199.15
230.00

593.22
593.22
593.22
582.00
590.00
693.00
736.00
1,039.00
1,100.00
3,644.07
3,559.32
3,644.07
3,474.58
3,389.83

700.00
1,156.00
1,211.00
1,186.00
1,218.00
1,450.00
1,420.00
1,420.00
1,234.00
1,234.00
860.00
1,054.29
1,156.00
1,198.00
733.00

880.00
880.00
880.00
880.00
880.00

1,420.00
1,420.00
506.00
1,200.00
7,619.05

428.00
1,700.00
 150.00
1,700.00
386.00
295.00
1,700.00
4.76

666.67
428.57
1,440.68
409.52
571.43
26.67
238.10
11.86
476.19
380.95
666.67
333.33
666.67

127.12
59.32
33.90
38.14
76.27
254.24
169.49
2,796.61
194.92
3,135.59
211.86
1,094.00
44,915.25
3,220.34
338.98

144.07
165.25
211.86

37,975.00
41,175.00
38,775.00
41,975.00
38,282.00
39,275.00
39,850.00
51,797.46
50,406.78
37,539.00
72.03
0.85
14.29
25.42
25,506.78
51,797.46
 8.47
317.80
190.68
105.93

550.85
593.22
567.80

762.71
889.83
1,483.05
550.85
389.83
105.93
120.34
529.66
635.59
932.20
932.20
677.97
635.59
868.64
741.53
296.61

500.00
1,562.65
490.63
333.33

231.36
275.42
254.24
320.34
424.76
469.52
290.48
200.00
205.08
822.88
551.69
21.90
874.29
740.00
1,099.15
50.85
354.29
160.17
406.78
381.36
440.68
1,355.93
296.61
67.80
1.69
 1.69
1,267.80
1,623.73
889.83
1,889.83
1,088.98
1,266.95
938.14
190.68
266.95
1,355.93
2,266.95
1,000.00
854.24
1,889.83

6.78
5.08
34.44
243.75
4.76
13.33
106.78
233.05
5.93
5.93
457.63
889.83
436.44
409.32
320.34
124.58
249.15
368.64

4,110.17
4,194.92
4,237.29
4,406.78
4,576.27
3,813.00
3,898.00
4,067.00
4,329.00
4,480.00

186.44
37.29
37.29
37.29
677.97
16.95
45.45
4,545.00
4,545.00
41.45
4,145.00
 45.45
45.45
45.45
41.45
40.00
40.00
41.45
33.90
50.85
45.45
45.45
254.24
52,542.37
55.08
42.37
72.03
49.15
203.39
50,847.46
5,084.75
37,288.14
4,545.00
40.00
40.00
41,450.00
41,450.00
41,450.00
84.75
84.75
37.29
254.24
254.24
84.75
33.90
45.45
45.45
45.45
45.45
101.69
45.45
45.45
46.61
45.45
45.45
45,450.00

45.45
45.45
45.45

45.45
84.75
45.45
45.45
45.45
45.45
 152.54
37.29
6,560.00

11,864.41
0.51
4,237.29
50,847.46
45,450.00
45,450.00
37.29
67,796.61

67,796.61

45.45
42.37
50.85
186.44
45.45
42,372.88
3,135.59
4,237.29

37.29
50.85
50.85
45.45
50.85
50.85
110.17
45.45
45.45
45.45
45.45
84.75
50.85
45.45
254.24
254.24
45.45
45.45
50.85
254.24
220.34
4,545.00
45.45

45.45

45.45
45.45

169.49
 45.45

12.71
55,854.00
12.71
21.19
55,854.00
55,854.00
55,854.00
55,854.00
55,854.00
55,854.00
55,854.00
29,059.00
29,059.00
29,059.00
29,059.00
29,059.00
39,083.00
39,083.00
39,083.00
39,083.00
39,083.00
8.00
39,083.00
39,083.00
39,083.00
45.76
423.73
381.36
10,169.49
35,415.00
36,200.00
21,186.44
119,680.00
18.00
55.08
4.00
100,000.00
100.00
100,000.00
100,000.00
100,000.00
16.95
42.37
29.66
12,711.86
169.49
2.54
37.29
47.46
37.29
29,059.00
8.47
211.86
21.19
35,415.00
1.69
21.19

550.85
779.66
438.14
169.49
423.73
233.05
275.42
762.71
1,949.15
2,288.14
1,144.07

57.63
59.32
33.90
39.83
1.69
84.75
107.63
44.92
1,118.64
347.46
51.69
50.85
855.93
31.36
32.20
550.85
46.00
47.00
22.03
27.97
40.00
11.02
55.08
52.54
45.76
43.22
44.07
2.54
114.41
16.95
101.69
466.10
3.39
32.30
14.41
33.90
62.71
71.19
75,423.73
101.69
275.42
199.15
84.75
3.39
14.41
11.02
27.97
760.17

173.13
84.75
118.64
97.46
171.19
67.80
55.93
207.63
156.78
152.54
182.20
110.17
33.90
127.12
194.92
84.75
84.75
84.75
139.83
423.73
142.86
169.49
72.03
237.29
111.86
63.56
289.83
93.22
18.64
228.81
50.85
203.39
65.25
59.32
148.31
186.44
68.57
114.29
114.29
88.98
177.97
186.44
177.97
186.44
105.93
289.83
576.27
186.44
25.42
 286.44
32.81
105.93
22.86
38.14
169.49
58.59

122.88
296.61
241.53
127.12
152.54
1,165.25
957.63
254.24
283.90
296.61
131.36
720.34
1,076.27
101.69
127.12
177.97
203.39
254.24
279.66
423.73
542.37
93.22
313.56
12.71
161.02
161.02
127.12
106.78
118.64
135.59
152.54
203.39
38.14
55.08
101.69
127.12
152.54
330.51

254.24
271.19
711.86
330.51
686.44
203.39
288.14
491.53
533.90
741.53

300.85

466.10

635.59

296.61

813.56

711.86

813.56

584.75

432.20

533.90

788.14

491.53

406.78

813.56

813.56

305.08

677.97

440.68

508.47

508.47

694.92

389.83

508.47

711.86

440.68

360.17

347.46
 288.14

576.27

610.17

398.31

508.47

500.00
394.07
440.68
37.29
53.39
88.98
124.58
133.90
142.37
152.54
156.78
165.25
194.92
105.93
152.54
152.54
110.17
466.10

45.45
42.37
728.81
106.78
6,449.15
4,135.59
978.81
1,822.03
2,313.56
2,533.90
711.86
978.81
1,512.71
1,868.64
2,444.92
4,224.58
5,025.42
8,097.46
266.95
355.93
220.34
23.73
7,288.14

50.85
720.34
148.31
135.59
 186.44
254.24
254.24
296.61
245.76
254.24
271.19
389.83
101.69
142.37
169.49
498.31
550.85
186.44
142.37

160.17
160.17
169.49
2,118.64
110.17
932.20
110.17
194.92
415.25
4.24
409.32
462.71
161.02
161.02
118.64
466.10
211.86
1,949.15
1,779.66
466.10
373.73
593.22
593.22
762.71
720.34
1,076.27
1,016.95
1,398.31
1,271.19
1,737.29
1,559.32
978.81
320.34
466.10

21.19
211.86
262.71
355.93
661.02
830.51
 1,398.31
1,694.92
1,796.61
601.69
1,186.44
508.47
593.22
593.22
677.97
576.27
38.14
38.14
46.61
55.08
444.92
533.90
110.17
661.02
5.08
932.20

4,004.24

5,932.20

10,254.24

1,144.07
1,457.63
779.66
1,016.95
1,601.69

682.20
889.83
610.17

1,694.92

508.47
677.97
779.66
847.46
847.46
525.42

254.24
720.34
296.61
72.03
25.42
33.90
9,152.54
12.71

38.14
12.71
 29.66
25.42
21.19
25.42
29.66
55.08
249.15
186.44
409.32
152.54

279.66
15.25
254.24
169.49
447.62
15.25
476.19
47.62
3,800.00
423.73
190.48
72.03
25.00
42.37
333.33
42.37
169.49
4,067.80
148.31
333.33
42.37
169.49
135.59
0.85
0.85
194.92
40.00
135.59
9.00
67.80
1.69
10.17
93.22
25.42
33.90
762.71
5.36
21.19
271.19
186.44
29.66
338.98
364.41
38,983.05
0.42
 8.47
12.71
6.78
0.85
762.71
5.93
25.40
20.00
20.00
10.00
900.00
125.00
2.86
38.14
6.78
338.98
20.00
338.98
446.43
23.81
4.76
16.95
200.00
33.90
66.96
211.86
17.86
254.24
5.08
25.42
67.80
46.61
220.34

29.66
47.62
63.56
3,559.32
42.37
10,169.49

11,186.44

10,169.49

4,745.76

5,805.08
 40.00
170.00
140.00
13.33
30.00
16.95
33.90
1,107.00
10.17

127.12
338.98
169.49
483.05

1,762.71
3.39
5.93
152.54
127.12
194.92
59.32

55.08
85,333.90

68,220.34

254.24
186.14
250.00
254.24
7.63
33.05
97.46
4.24
10.17
50.85
55.08
55.08
55.08
0.42
3.39
1.69
7,203.39
67.80
67.80
21.19
38.10
52.38
76.27
28.57
 95.24
101.69
1,355.93
323.81
447.62
4.76
237.29
29.66
152.54
46.61
703.39
25.42
67.80
1,016.95
5.08
101.69
9.32
27,118.64
415.25
457.63
661.86
916.10
127.12
254.24
169.49
59.32
80.95
262.71
2.54
25.42
432.20
296.61
432.20
728.81
932.20
1,186.44
1,440.68
1,779.66
2,203.39
2,796.61
3,559.32
18,644.07
177.97
88.98
135.59
38.14
16.95
398.31
593.22
18.64
39.83
169.49
45,645.00
46,145.00
30,677.97
163.56
110.17
 148.31
0.85
317.80
165.25
152.54
148.31
139.83
52.54
508.47
22.03
847.46

1,694.92

84.75

2,966.10
50.85

101.69

19.49
35,465.00
4,237.29
4,100.00
1,101.69
1,610.17
2,542.37
1,610.17
4.24
3.39
25.42
80.51
29.66
29.66
1,525.42
1,822.03
4.00
1.50
5.08
4.24
8.47
139.83
4.00
252.54
20.59
1,144.07
1,186.44
296.61
5,508.47
847.46
635.59
1,610.17
169.49
974.58
39.36
28.70
 36.08
32.80
28.70
8.20
4.10
2.46
24.60
338.98

559.32

796.61

1,028.81

254.24
735.59
580.51

725.42

241.53
466.10
720.34
974.58
108.47
211.86
300.85
54.24

76.27

89.83

113.56

128.81

168.64

610.17
703.39
1,261.86
1,577.12
122.88
182.20
242.37
302.54
332.20
150.85

227.12

281.36

358.47
398.31

54.24
76.27
89.83
113.56
128.81
168.64
Item No. Description Unit
1.1 KSRB 0.5-1.1 : Providing cement mortar of mix 1:1 (1 cement :1 sand) including cum
cost of all materials, labour charges, HOM ofmachinery complete as per
specifications.Specification No. KBS 0.5-1.2
1.2 KSRB 0.5-1.2 : Providing cement mortar of mix 1:2(1 cement :2 sand) including cum
cost of all materials, labour charges, HOM ofmachinery complete as per
specifications. Specification No. KBS 0.5-1.2
1.3 KSRB 0.5-1.3 : Providing cement mortar of mix 1:3 (1 cement : 3 sand) including cum
cost of all materials, labour charges, HOM of machinery complete as per
specifications. Specification No. KBS 0.5-1.2
1.4 KSRB 0.5-1.4 : Providing cement mortar of mix 1:4 (1 cement :4 sand) including cum
cost of all materials, labour charges, HOM ofmachinery complete as per
specifications. Specification No. KBS 0.5-1.2
1.5 KSRB 0.5-1.5 : Providing cement mortar of mix 1:5 (1 cement :5 sand) including cum
cost of all materials, labour charges, HOM of machinery complete as per
specifications. Specification No. KBS 0.5-1.2
1.6 KSRB 0.5-1.6 : Providing cement mortar of mix 1:6 (1 cement :6 sand) including cum
cost of all materials, labour charges, HOM of machinery complete as per
specifications. Specification No. KBS 0.5-1.2
1.7 KSRB 0.5-1.7 : Providing cement mortar of mix 1:8 (1 cement :8 sand) including cum
cost of all materials, labour charges, HOM ofmachinery complete as per
specifications. Specification No. KBS 0.5-1.2
1.8 KSRB 0.5-1.8 : Providing cement mortar of mix 1:10 (1 cement :10 sand) cum
including cost of all materials, labour charges, HOM of machinery complete as
per specifications. Specification No. KBS 0.5-1.2
1.9 KSRB 0.5-2.1 : Providing lime mortar of mix 1:1 (1 lime putty :1 sand) including cum
cost of all materials, labour charges, HOM of machinery complete as per
specifications. Specification No. KBS 0.5-2.1
1.10 KSRB 0.5-2.2 : Providing lime mortar of mix 1:2 (1 lime putty :2 sand) including cum
cost of all materials, labour charges, HOM of machinery complete as per
specifications. Specification No. KBS 0.5-2.1
1.11 KSRB 0.5-2.3 : Providing lime mortar of mix 1:3 (1 lime putty :3 sand) including cum
cost of all materials, labour charges, HOM of machinery complete as per
specifications. Specification No. KBS 0.5-2.1
1.12 KSRB 0.5-3.1 : Providing lime surkhi mortar of mix 1:1 (1 lime putty: 1 surkhi) cum
including cost of all materials, labour charges, HOM of machinery complete as
per specifications. Specification No. KBS
1.13 KSRB 0.5-3.2 : Providing lime surkhi mortar of mix 1:2 (1 lime putty : 2 surkhi) cum
including cost of all materials, labour charges, HOM of machinery complete as
per specifications. Specification No. KBS
1.14 KSRB 0.5-3.3 : Providing lime surkhi mortar of mix 1:3 (1 lime putty :3 surkhi) cum
including cost of all materials, labour charges, HOM of machinery complete as
per specifications. Specification No. KBS
1.15 KSRB 0.5-4.1 : Providing lime surkhi sand mortar of mix 1:1:1 (1 lime putty : 1 cum
surkhi : 1 sand) including cost of all materials, labour charges, HOM of
machinery complete as per specifications. Specification No. KBS
1.16 KSRB 0.5-4.2 : Providing lime surkhi sand mortar of mix 1:1:2 (1 lime putty : 1 cum
surkhi : 2 sand) including cost of all materials, labour charges, HOM of
machinery complete as per specifications. Specification No. KBS
1.17 KSRB 0.5-5.1 : Providing cement mortar with stone dust/grit of mix 1:2 (1 cement cum
: 2 stone dust/grit) including cost of all materials, labour charges, HOM of
machinery complete as per specifications. Specification No. KBS
1.18 KSRB 0.5-6.1: Providing cement lime mortar of mix 1:1:3 (1 cement : 1lime cum
putty:3 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.19 KSRB 0.5-6.2: Providing cement lime mortar of mix 1:1:4 (1 cement : 1lime cum
putty:4 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.20 KSRB 0.5-6.3: Providing cement lime mortar of mix 1:1:5 (1 cement : 1lime cum
putty:5 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.21 KSRB 0.5-6.4: Providing cement lime mortar of mix 1:1:6 (1 cement : 1lime cum
putty:6 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.22 KSRB 0.5-6.5: Providing cement lime mortar of mix 1:1:7 (1 cement : 1lime cum
putty:7 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.23 KSRB 0.5-6.6: Providing cement lime mortar of mix 1:1:8 (1 cement : 1lime cum
putty:8 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.24 KSRB 0.5-6.7: Providing cement lime mortar of mix 1:2:9 (1 cement : 2lime cum
putty:9 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.25 KSRB 0.5-6.8: Providing cement lime mortar of mix 1:3:12 (1 cement : 3lime cum
putty:12 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.3
1.26 KSRB 0.5-7.1 : Providing white cement mortar with marble dust of mix 1:2 (1 cum
white cement : 2 marble dust) including cost of all materials, labour charges,
HOM of machinery complete as per specifications. Specification No. KBS
1.27 KSRB 0.5-7.2 : Providing white cement mortar with marble dust of mix 1:3 (1 cum
white cement : 3 marble dust) including cost of all materials, labour charges,
HOM of machinery complete as per specifications. Specification No. KBS
1.28 KSRB 0.5-7.3 : Providing white cement mortar with marble dust of mix 1:4 (1 cum
white cement : 4 marble dust) including cost of all materials, labour charges,
HOM of machinery complete as per specifications. Specification No. KBS
1.29 KSRB 0.5-7.4 : Providing white cement mortar with marble dust of mix 1:5 (1 cum
white cement : 5 marble dust) including cost of all materials, labour charges,
HOM of machinery complete as per specifications. Specification No. KBS
1.30 KSRB 0.5-8.1 : Providing fly ash sand mortar of mix 1:1.5:3 (1 cement : 1.5 fly cum
ash : 3 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.4
1.31 KSRB 0.5-8.2 : Providing fly ash sand mortar of mix 1:2:4 (1 cement : 2 fly ash : cum
4 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.4
1.32 KSRB 0.5-8.3 : Providing fly ash sand mortar of mix 1:2.5:5 (1 cement : 2.5 fly cum
ash : 5 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.4
1.33 KSRB 0.5-8.4 : Providing fly ash sand mortar of mix 1:3:6.5 (1 cement : 3 fly cum
ash : 6.5 sand) including cost of all materials, labour charges, HOM of machinery
complete as per specifications. Specification No. KBS 0.5-2.4
1.34 Mud Mortar cum
Basic Rate
8,143.00

6,572.00

5,789.00

5,001.00

4,577.00

4,214.00

3,850.00

3,608.00

5,853.00

5,218.00

4,907.00

4,614.00

3,567.00

3,047.00

4,334.00

3,473.00

5,190.00

6,985.00
 6,578.00

6,301.00

5,746.00

5,434.00

5,151.00

5,527.00

5,427.00

14,379.00

11,287.00

8,825.00

7,500.00

4,034.00

3,489.00

3,186.00

2,944.00

374.00
Item No. Description
2.1
KSRB 2-1.1 : Earthwork in surface excavation in ordinary soil for levelling and lowering
the ground manually ( other than foundation of buildings, culverts, road drains and
trenches of pipe lines and cables ) and removing the excavated stuff to a distance not
exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed,
disposed earth to be levelled after breaking of clods and neatly dressed as per
specifications. specification. No. KBS 2.1(a) / 2.3.1 Note :Adopt item 2.24 for excavation
in all types of soils for lowering & levelling the ground for building works by mechanical
means
2.2
KSRB 2-1.2 : Earthwork in surface excavation in Hard soil for levelling and lowering the
ground manually ( other than foundation of buildings, culverts, road drains and trenches
of pipe lines and cables ) and removing the excavated stuff to a distance not exceeding
50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to
be levelled after breaking of clods and neatly dressed as per specifications. specification.
No. KBS 2.1(a) / 2.3.1 Note :Adopt item 2.24 for excavation in all types of soils for
lowering & levelling the ground for building works by mechanical means

2.3 KSRB 2-2.1 : Earthwork excavation by manual means for foundation of buildings, water
supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above
in width, in ordinary soil not exceeding 1.5 m. in depth including dressing the bottom and
sides of pits and trenches, stacking the excavated soil clear from edges of excavation
with lead upto 50 m. after breaking of clods complete as per specifications. specification.
No. KBS 2.1(a) / 2.3.5
2.4 KSRB 2-2.2 : Earthwork excavation by manual means for foundation of buildings, water
supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above
in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and
sides of pits and trenches, stacking the excavated soil clear from edges of excavation
with lead upto 50 m. after breaking of clods complete as per specifications. specification.
No. KBS 2.1(b) / 2.3.5
2.5 KSRB 2-2.3 : Excavation by manual means for foundation of buildings, water supply &
sanitary lines and electrical conduits etc. , either in pits or in trenches 1.50m and above in
width, in soft rock/ordinary rock not exceeding 1.50mtrs in depth including stacking the
excavated stuff clear from edges of excavation with lead upto 50mt including cost of
explosives, labour, HOM complete as per specifications. specification. No. KBS
2.1Cl2.9.412.1812.19
2.6 KSRB 2-2.4 : Excavation by manual means for foundation of buildings, water supply &
sanitary lines and electrical conduits etc. , either in pits or in trenches 1.50m and above in
width, in soft rock /ordinary rock without blasting not exceeding 1.50mtrs in depth
including stacking the excavated stuff clear from edges of excavation with lead upto 50mt
including cost of explosives, labour, HOM complete as per specifications. specification.
No. KBS 2.1Cl2.9.412.1812.19
2.7 KSRB 2-2.5 : Excavation 1.5m and above in width in hard rock by blasting for foundation
of buildings, water supply, sanitary lines and electrical conduits either in pits or in
trenches not exceeding 1.5 m. in depth, stacking the excavated stuff from edges of
excavation with lead upto 50m including cost of explosives, labour and HOM of
equipment complete as per specifications. specification. No. KBS 2.1.d / 2.3.4 / 2.18 /
2.19
2.8 KSRB 2.2.6 : Excavation 1.5m and above in width in hard rock by chiselling and / or
wedging, where blasting is prohibited for foundation of buildings, water supply, sanitary
lines and electrical conduits either in pits or in trenches 1.5 m. in depth stacking the
excavated stuff clear from the edge of excavation with lead upto 50m including cost of
labour complete as per specifications. Specification. No. KBS
2.9
KSRB 2.2.7: Benching hard rock 5 to 7.5 cm depth. for seating of foundation, including
cost of all labour complete as per specifications. specification. No. KBS 2.1(a) / 2.3.1
2.10
KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations
upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by
ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all
labour complete as per specifications. specification. No. KBS 2.9

2.11
KSRB 2-4 : Refilling available earth around pipe lines, cables in layers not exceeding
20cms in depth, compacting each deposited layer by ramming after watering with lead
upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications.

2.12 KSRB 2.5 : Earthwork excavation in all soil deposits and filling sides of foundation upto
plinth in layers not exceeding 20cms. in depth, compacting each deposited layer by
ramming after watering with all lead and lift including cost of all labour complete as per
specifications. specification. No. KBS 2.9.9 / 2.9.10.1 / 2.1.1
2.13 KSRB 2.6 : Providing and filling sand in foundation upto plinth to required depth for sub
soil treatment including watering ramming with all lead and lift complete as per
specifications.specification. No. KBS 2.10.2
2.14 KSRB 2.7 : Providing and removing shoring and strutting for protecting the sides of
foundation trenches, wherever required, including cost of all materials and labour
complete as per specifications. specification. No. KBS 2.5 / 2.13
2.15 KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm.
and down size, with approved sand including hand packing, ramming, watering, including
cost of all materials and labour with all lead and lift. complete as per specifications.
specification. No. KBS
2.16 KSRB 2.9 : Spreading and forming the excavated earth to required level, slope for an
average thickness of 75mm. in all classes of soils including breaking clods and tamping
manually alround the building and low laying areas complete as per
specifications.specification. No. KBS :
2.17 KSRB 2.10 : Providing sand cement bed with 5% cement with all leads for all materials
and lift of 1.5 m. machine mixed, laid in layers of 15cms. thick and well compacted for
foundation, including curing cost of materials labour and HOM complete as per
specifications. specification. No. KBS 2.10.2
2.18 KSRB 2.11 : Providing sand cement bed with 10% cement with all leads for all materials
and lift of 1.5 m. machine mixed, laid in layers of 15cms. thick and well compacted for
foundation, including curing cost of materials labour and HOM complete as per
specifications. specification. No. KBS 2.10.2
2.19 KSRB 2.12 : Providing sand piles with all leads and lift of 1.5 m. for stabilising foundation
after duly making 5 cms. dia holes to a depth of 1.2 to 1.5 m. at 0.5 m c to c and filling
with sand and tamping wherever required including cost of materials, labour complete as
per specifications.
2.2 KSRB 2.13 : Providing sand piles with all leads and lift of 1.5 m. for stabilising foundation
after duly making 5 cms. dia holes to a depth of 1.2 to 1.5 m. at 0.5 m c to c and filling
with sand and tamping wherever required including cost of materials, labour complete as
per specifications. with sand and 10% cement
2.21 KSRB 2.14-1: Extra for additional lift of 1.5m. or part thereof for excavation In loose / soft
or hard soil including cost of materials, labour complete as per specifications.
2.22
KSRB 2.14-2: Extra for additional lift of 1.5m. or part thereof for excavation In soft or hard
rock including cost of materials, labour complete as per specifications. in soft or hard rock

2.23.1
Earth work excavation for foundation of structures by mechanical means as per drawing
and technical specification, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling
the excavation earth to the extent required and utilising / transporting the remaining earth
locally upto 1.00km lead. (Depth upto 3.00 Mts) -In all types of soil
2.23.2 Earth work excavation for foundation of structures by mechanical means as per drawing
and technical specification, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling
the excavation earth to the extent required and utilising / transporting the remaining earth
locally upto 1.00km lead. (Depth upto 3.00 Mts) - Soft rock/ordinary rock (without
blasting)
2.23.3 Earth work excavation for foundation of structures by mechanical means as per drawing
and technical specification, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling
the excavation earth to the extent required and utilising / transporting the remaining earth
locally upto 1.00km lead. (Depth upto 3.00 Mts) - Ordinary/Hard rock (with blasting using
explosives)
2.23.4
Earth work excavation for foundation of structures by mechanical means as per drawing
and technical specification, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling
the excavation earth to the extent required and utilising / transporting the remaining earth
locally upto 1.00km lead. (Depth upto 3.00 Mts) - Marshy soil-

2.24 Earth work for lowering and levelling the ground other than foundation works by
mechanical means upto 3.00 depth, including providing shoring and strutting, removal of
stumps and other deleterious matter, dressing of sides and bottom, filling back the
excavation earth to the extent required including the cost of labour & HOM of
machineries, as per drawing and technical specification. Note: Adopt item 2.24 for
excavation in all typpppes of soils for lowering & Levelling the ground for building works
by mechanical means
Unit Basic Rate
cum 249.00

cum 349.00

cum 299.00

cum 449.00

cum 686.00

cum 1,421.00

cum 739.00

cum 2,042.00

Sqm 2,192.00
cum 201.00

cum 121.00

cum 403.00

cum 2,190.00

Sqm 453.00

cum 2,143.00

Sqm 9.00

cum 3,138.00

cum 3,573.00

Sqm 324.00

Sqm 362.00

cum 20.00

cum 35.00

cum 52.00
cum 68.00

cum 741.00

cum 394.00

cum 61.00
Item No. Description Unit
3.1 KSRB-3.1 Supplying chloropyriphos emulisifiable concentrate of 20%, in L
sealed containers including delivery as specified sales tax, transport,
Insurance and other levies complete as per specifications. Specification No.
KBS
3.2 KSRB-3.2: Providing and injecting chemical emulsion for Pre- constructional Sqm
Anti-Termite Treatment, creating continuous chemical barrier under and around
the column pits, walls, trenches, basement excavation, top surface of the plinth
filling, junction of wall and floor, along the external perimeter of building,
expansion joints, over the top surface of consolidated earth on which apron is
to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable
concentrates of 20% concentration, including cost of chemical, diluting in water
to one percent concentration, labour, HOM of equipments, complete as per
specifications. (Plinth area of the building at ground floor only shall be
measured ) Specification No. KBS : 3.2.6 / 3.2.7

3.3 KSRB-3.3 : Providing, injecting chemical emulsion for Pre-constructional Anti- M

Termite Treatment along external walls where the apron is not provided using
chemical emulsion at 7.5 Litre/sqm of the vertical surface of the substructure to
a depth of 300mm. Including excavation of channel along the wall and redoing
with chlorophyriphos emulsion concentrate 20% diluting in water to 1%
concentration, including cost of chemicals, diluting in water to one percent
concentration, labour, HOM of equipments, complete as per specifications.
Specification No. KBS : 3.3.3

3.4 KSRB-3.4: Providing, injecting chemical emulsion for Pre-constructional Anti- M

Termite Treatment along external walls below concrete or masonry apron using
chemical emulsion at 2.25 litre/m. including drilling and plugging of holes, with
chlorophyriphos emulsion concentrate 20% diluting in water to 1%
concentration, including cost of chemicals, diluting in water to one percent
concentration, labour, HOM of equipments, complete as per specifications.
Specification No. KBS : 3.3.4

3.5 KSRB 3.5: Providing, injecting chemical emulsion for Anti-Termite Treatment of Sqm
soil under existing floors using chemical emulsion at one litre / hole 30mm
apart including drilling 12mm. dia holes and plugging with cement mortar 1:2
proportion to match with the existing floors with chlorophyriphos emulsion
concentrate 20%, including cost of chemical diluting in water to one percent
concentration, labour, HOM of equipments, complete as per specifications.

3.6 KSRB.3-6: Providing, Injecting chemical emulsion for Anti-Termite Treatment of M

existing masonry using chemical emulsion at one liter / hole at 300mm
intervals including drilling of holes at 45 degree and plugging them with cement
mortar 1:2 to the full depth of the hole with Chloropyriphos emulsifiable
concentration 20% including cost of chemical diluting in water to one percent
concentration, labour, HOM of equipments, complete as per specifications.
Specification No. KBS : 3.3.5

3.7 KSRB 3.7: Providing, injecting chemical emulsion for Anti-Termite Treatment at M
points of contacts of wood work by chemical emulsion Chloropyriphos ( in oil or
kerosene based solution ) at 0.5 liters per hole by drilling 6mm. dia holes at
downword angle of 45 degree at 150mm. c to c and sealing the same including
cost of chemicals, diluting in water to one percent concentration, labour, HOM
of equipments, complete as per specifications. Specification No. KBS : 3.3.7

3.8 Providing general disinfection services, spraying of insecticide and pesticide Sqm
inside and outside the building ( flies, bedbugs,lizards, cockroaches, spiders
caterpillars etc., including cost of materials labour lead lift, hire charges of
equipments etc., complete.
Basic Rate
205.00

106.00

86.00

46.00

251.00

79.00

251.00

29.00
Item No. Description Unit
4.1 KSRB 4-1.1: Providing and laying in position plain cement concrete of mix cum
1:2:4 with OPC cement @ 240kgs, with 40mm and down size graded granite
metal coarse aggregates @0.878cum and fine aggregates @ 0.459cum
machine mixed, concrete laid in layers not exceeding 15 cms. thick, well
compacted, in foundation, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
4.2 KSRB 4-1.2 : Providing and laying in position plain cement concrete of mix cum
1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite
metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum
machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms.
thick, well compacted, in foundation including cost of all materials, labour,
HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1, 4.2
4.3 KSRB 4-1.3 : Providing and laying in position plain cement concrete of mix cum
1:4:8 with OPC cement @ 180kgs, with 40mm and down size graded granite
metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine
mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick,
well compacted, in foundation, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
4.4 KSRB 4-1.4 : Providing and laying in position plain cement concrete of mix cum
1:5:10 with OPC cement @ 160kgs, with 40mm and down size graded granite
metal coarse aggregates @0.86cum and fine aggregtes @ 0.58cum machine
mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick,
well compacted, in foundation, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
4.5 cum
KSRB 4-1.5 : Providing and laying in position plain cement concrete of mix
M20 with OPC cement @ 300kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine
mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in
foundation, plinth and cills, including cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
4.6 KSRB 4-1.6 ; Providing and laying in position plain cement concrete of mix cum
1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal
coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine
mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in
foundation, plinth and cills, ncluding cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
4.7 KSRB 4-1.7 : Providing and laying in position plain cement concrete of mix cum
1:3:6 with OPC cement @ 220kgs, with 20mm and down size graded granite
metal coarse aggregates @0.84cum and fine aggregtes @ 0.56cum, machine
mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in
foundation, plinth and cills, ncluding cost of all materials, labour, HOM of
machinery, curing complete as per specifications. Specification No. KBS 4.1,
4.2
4.8 KSRB 4-1.8 : Extra for laying cement concrete under water including cost of cum
pumping or dewatering and clearing slush as per specifications. Specification
No. KBS 4.2, 4.8
4.9 KSRB 4-1.9 : Extra for laying cement concrete under foul conditions. cum
Specification No. KBS
4.10 cum
KSRB 4.2.1 : Providing and laying in position reinforced cement concrete of
Design mix M25 with OPC cement @ 340kgs, with 20mm and down size
graded granite metal coarse aggregates @0.70 cum and fine aggregtes @
0.47cum, with super plasticisers @ 3 liters confirming to is 9103-1999
reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for all works in foundation for footings, pedastals, retaining
walls, return walls, walls (any thickness) including attached pilasters,
columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths
etc., including cost of all materials, labour, HOM of machinery, curing, complete
but excluding cost of reinforcement as per specifications. Specification No.
KBS 4.1, 4.6

4.11 cum
KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of
Design mix M20 with OPC cement @ 320kgs, with 20mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregtes @
0.460 cum, with super plasticisers @ 3 liters confirming to is 9103-1999
reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms
thick, vibrated for all works in foundation for footings, pedastals, retaining
walls, return walls, walls (any thickness) including attached pilasters,
columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths
etc., including cost of all materials, labour, HOM of machinery, curing, complete
but excluding cost of reinforcement as per specifications. Specification No.
KBS 4.1, 4.6

4.12 cum
KSRB 4.2.7 : Providing and laying in position reinforced cement concrete of
design mix M25 with OPC cement @ 340kgs, with 20mm and down size
graded granite metal coarse aggregates @0.70cum and fine aggregtes @
0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in ground floor level for roof slabs, staircase, lintles and
beams retaining walls, return walls, walls (any thickness) including attached
pilasters, columns, ,pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc.,
including cost of all materials, labour, HOM of machinery, curing, complete but
excluding cost of reinforcement as per specifications. Specification No. KBS
4.1, 4.6

4.13 cum
KSRB 4.2.8: Providing and laying in position reinforced cement concrete of
design mix M20 with OPC cement @ 320kgs, with 20mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregates @
0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008, machine mixed, concrete laid in layers not exceeding 15 cms thick,
vibrated for all works in ground floor level for roof slabs, staircase, lintles, and
beams retaining walls, return walls, walls (any thickness) including attached
plasters, columns, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc.,
including cost of all materials, labour, HOM of machinery, curing, complete but
excluding cost of reinforcement as per specifications. Specification No. KBS
4.1, 4.6

4.19 Sqm
KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of
design mix M20 with OPC cement @ 24kgs, with 12mm and down size graded
granite metal coarse aggregates @0.05175cum and fine aggregtes @
0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted
for plain chajja of 7.5 cms. average thickness, upto ground floor level, including
cost of all materials, labour, HOM of machinery, finishing, curing, complete but
excluding cost of reinforcement as per specifications. Specification No. KBS
4.1, 4.6
4.20 Sqm
KSRB 4.2.11 : Providing and laying in position reinforced cement concrete of
design mix M20 with OPC cement @ 27.20kgs, with 12mm and down size
graded granite metal coarse aggregates @0.05865cum and fine aggregtes @
0.0391cum, with superplastisiser @0.225lts, machine mixed, well compacted
for plain chajja of 8.5 cms. average thickness, upto ground floor level, including
cost of all materials, labour, HOM of machinery, finishing, curing, complete but
excluding cost of reinforcement as per specifications. Specification No. KBS
4.1, 4.6
4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja M
with plastering ( labour charges only ) as per specifications. Specification No.
KBS
4.22 KSRB 4-3.1 : Extra if vibrator is used for Item No.4-1 to 4-8 as per cum
specifications. Specification No. KBS 4.2.6
4.23 KSRB 4-3.2 : Deduct where machine mixing is not done Specification No. KBS cum
4.2.2.5 / 4.3.2.2
4.24 cum
KSRB 4-4.1 : Extra for use of water proofing compound in Cement concrete of
mix 1:1:2,at one kg of compound per bag of cement. Specification No. KBS

4.25 cum
KSRB 4-4.2 : Extra for use of water proofing compound in Cement concrete of
mix 1:1.5:3,at one kg of compound per bag of cement. Specification No. KBS

4.26 cum
KSRB 4-4.3 : Extra for use of water proofing compound in Cement concrete of
mix 1:2:4,at one kg of compound per bag of cement. Specification No. KBS

4.27 Sqm
KSRB 4-5 : Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm
dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing
chicken mesh for drop chajja, facia, backing to cup boards including cost of all
materials, labour, providing and removing form work HOM of machineries,
curing, complete as per specifications. Specification No. KBS

4.28 KSRB 4-6.1 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for foundations, footings, bases of columns for
mass concrete including cost of all materials, labour complete as per
specificaitons. Specification No. KBS 4.6.2
4.29.1 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs.
Specification No. KBS 4.6.2
4.29.2 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 6 mtrs.
Specification No. KBS 4.6.2
4.29.3 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 7 mtrs.
Specification No. KBS 4.6.2
4.29.4 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 8 mtrs.
Specification No. KBS 4.6.2
4.29.5 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 9 mtrs.
Specification No. KBS 4.6.2
4.29.6 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 10
mtrs. Specification No. KBS 4.6.2
4.29.7 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 11
mtrs. Specification No. KBS 4.6.2
4.29.8 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 12
mtrs. Specification No. KBS 4.6.2
4.29.9 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 13
mtrs. Specification No. KBS 4.6.2
4.29.10 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 14
mtrs. Specification No. KBS 4.6.2
4.29.11 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 15
mtrs. Specification No. KBS 4.6.2
4.29.12 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for suspended floors, landings, balconies and
likes, thickness upto 200 mm including cost of all materials, labour complete as
per specificaitons for heights more than 3.50m from ground level. - 0 to 16
mtrs. Specification No. KBS 4.6.2
4.30 Sqm
KSRB 4-6.3 : Providing and removing centering, shuttering, strutting, propping
etc., and removal of form work for flat surface such as suspended floors, roofs,
landings, balconies and likes, thickness above 200 mm including cost of all
materials, labour complete as per Specification. Specification No. KBS 4.6.2

4.31 KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for vertical surface such as walls at any
thickness, including attached pilasters, buttresses, plinth cills and string
courses cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.32 KSRB 4-6.5 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., for columns, pillars, post and struts, square / rectangular/ polygon in plan
including cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.33 KSRB 4-6.6 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for columns, pillars,post and struts, circular or
curved in plan including cost of all materials, labour complete as per
specifications. Specification No. KBS 4.6.2
4.34 KSRB 4-6.7 :Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for sides and soffits of beams, beam
haunchings, cantilever girders, bressumers and lintels not exceeding 1m in
depth including cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.35 KSRB 4-6.8 : Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for sides and soffits of beams, beams
haunchings, cantilelver, girders, bressumers and lintels exceeding 1m in depth
including cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.36 Sqm
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping
etc., for edges of slabs and breaks in floor including cost of all materials, labour
complete as per specifications. Specification No. KBS 4.6.2

4.37 Sqm
KSRB 4-6.10 :Providing and removing centering, shuttering, strutting, propping
etc., for chajjas, corbels etc., including edges including cost of all materials,
labour complete as per specifications. Specification No. KBS 4.6.2

4.38 KSRB 4-6.11 :Providing and removing centering, shuttering, strutting, propping Sqm
etc., and removal of form work for Stairs (excluding landing) except spiral
staircase including cost of all materials, labour complete as per specificaiton.
Specification No. KBS 4.6.2
4.39 Sqm
KSRB 4-6.12 :Providing and removing centering, shuttering, strutting, propping
etc., and removal of form work for cornices and mouldings including cost of all
materials, labour complete as per specifications. Specification No. KBS 4.6.2

4.40 KSRB 4-6.13 :Providing and removing, centering, shuttering, strutting, Sqm
propping etc., and removal of form work for vertical fins and vertical sun
breakers including cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2
4.41 Sqm
KSRB 4-6.14 :Providing and removing centering, shuttering, strutting, propping
etc., and removal of form work for sloping or battering surface including folded
plates where inclination to horizontal plane does not exceed 30 degree
requiring shuttering only on the under side including cost of all materials,
labour complete as per specifications. Specification No. KBS 4.6.2

4.42 KSRB 4-6.15 : Providing and removing centering, shuttering, strutting, Sqm
propping etc., and removal of form work for where inclination to horizontal
plane exceeds 30 degree (where shuttering may be provided both on under
side and upper side if required) including cost of all materials, labour complete
as per specifications. Specification No. KBS 4.6.2
4.43.1 M
KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-15
cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection
+ 0.5m In to the ground), the distance between two rows being 1.25m and
spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm
overlap on either side and braces at 2 m c to c including longitudinal and
transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications.
4.43.2 cum
KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-15
cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection
+ 0.5m In to the ground), the distance between two rows being 1.25m and
spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm
overlap on either side and braces at 2 m c to c including longitudinal and
transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications. -
Scaffolding for stone masonry work converted to cum.

4.43.3 Sqm
KSRB 4-7 : Providing 2 legged scaffolding for stone masonry work using 10-15
cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection
+ 0.5m In to the ground), the distance between two rows being 1.25m and
spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm
overlap on either side and braces at 2 m c to c including longitudinal and
transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications. -
Scaffolding for stone masonry work converted to sqm.

4.44.1 cum
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using 10-
15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
0.5 mm overlap on either side and braces at 2 m c to c including longitudinal
and transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications - for non
modular brick work (Non modular standard bricks : 4x0.23x3=2.76 cum)

4.44.2 cum
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using 10-
15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
0.5 mm overlap on either side and braces at 2 m c to c including longitudinal
and transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications - for
modular brick work (modular standard bricks : 4x0.20x3=2.40 cum)

4.44.3 Sqm
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using 10-
15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
0.5 mm overlap on either side and braces at 2 m c to c including longitudinal
and transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications - for non
modular brick work
4.44.4 Sqm
KSRB 4-8 : Providing two legged scaffolding for brick masonry work using 10-
15 cms. dia best quality Casurina poles of 4m over all length (3m +0.5m
projection + 0.5m In to the ground) the distance between two rows being
1.25m and spacing of post being 2m in both rows with 2 horizontal posts with
0.5 mm overlap on either side and braces at 2 m c to c including longitudinal
and transveres middle braces to step up and providing platform with casurina
poles, forms tied up using coir rope complete as per specifications - for
modular brick work
4.46.2 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including Tonne
straightening, cutting, bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
and wastage shall not be measured and paid) cost of materials, labour, HOM
of machinery complete as per specifications. Specification No. KBS 4.6.3 -
TMT bars Fe 500
4.46.3 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including Tonne
straightening, cutting, bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
and wastage shall not be measured and paid) cost of materials, labour, HOM
of machinery complete as per specifications. Specification No. KBS 4.6.3 -
TMT bars Fe 550
4.47 Lift charges for steel of all diameters for additional floors over ground floor per Tonne
floor height of 3.5 m. or part thereof cost of labour, complete as per
specifications.
4.48 cum
Providing and laying cement concrete using 20 mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete (RMC) M 20
for R.C.C works laid in 15 cms thick layers and well compacted vibrating,
curing, for raft foundation column footing , main and secondary beams with all
lead and lifts etc., complete (exclusive of cost of steel and fabrication charges.)

4.49.1 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete for Beams, Staircase and
Roof with M-20 Note: The RMC should be obtained only from the plants
certified by the quality council of india as per letter no CE, C&B, AE-2, 2015-16
Dt. 02.09.2015
4.49.2 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete for Beams, Staircase and
Roof with M-25 Note: The RMC should be obtained only from the plants
certified by the quality council of india as per letter no CE, C&B, AE-2, 2015-16
Dt. 02.09.2015
4.49.3 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete for Beams, Staircase and
Roof with M-30 Note: The RMC should be obtained only from the plants
certified by the quality council of india as per letter no CE, C&B, AE-2, 2015-16
Dt. 02.09.2015
4.49.4 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete for Beams, Staircase and
Roof with M-35 Note: The RMC should be obtained only from the plants
certified by the quality council of india as per letter no CE, C&B, AE-2, 2015-16
Dt. 02.09.2015
4.49.5 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete for Beams, Staircase and
Roof with M-40. Note: The RMC should be obtained only from the plants
certified by the quality council of India as per letter No, CE, C&B, AE-2, 2015-
16 Dt.02.09.2015.
4.49.6 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete with OPC 50%+ GGBS
50% M-20. Note: The RMC should be obtained only from the plants certified by
the quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
4.49.7 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete with OPC 50%+ GGBS
50% M-25. Note: The RMC should be obtained only from the plants certified by
the quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
4.49.8 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete with OPC 50%+ GGBS
50% M-30. Note: The RMC should be obtained only from the plants certified by
the quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
4.49.9 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) - Ready mixed Cement concrete with OPC 80% + GGBS
20% M-35. Note: The RMC should be obtained only from the plants certified by
the quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
4.49.10 cum
Providing and laying cement concrete using 20mm and down size granite
coarse aggregates and fine aggregates of ready mixed concrete for RCC
works laid in 15 cm thick layers and well compacted including vibrating curing
etc., with all lead and lift etc., complete. (exculsive of cost of steel and
fabrication charges) -Ready mixed Cement concrete with OPC 85% + GGBS
15% M-40. Note: The RMC should be obtained only from the plants certified by
the quality council of India as per letter No, CE, C&B, AE-2, 2015-16
Dt.02.09.2015.
4.51 cum
Providing and mixing fibermesh MD(Multi Dimensional) Graded (fibermesh
inforce e3) fibrilated (interconnected bundles of fibers that open up during the
mix process) 100% virgin Polypropylene fibers contains no reprocessed olefin
materials and are specially manufactured with 25 individual unique fiber design
to an optimum gradation for use as complete secondary reinforcement.
Application per cubic meter shall equal a minimum of 0.1% by volume (0.9kg
per cubic meter) in the concrete. Fibermesh MD Graded Polypropylene
fibrilated fiber should confirm to ASTM C 1116 type III 4.1.3 ASTM C 1116
performance level 1% ASTM C 1339 (Minimum average residual strength of
0.35 Mpa).

4.52 Providing and mixing fibermesh stealth e3 Fibermesh150multi dimensional cum

graded multifilamenrt 100%virgin polypropylene fibres contains no
reprocesserd olfrin materials and are specifically manufactured for use as
concrete secondary reinforcement. Application per cubic meter shall be @
0.9kg to 1.8kg per cum of concrete. Fibermesh stealth e3 shall confirm to
ASTM C 1116 type 111.4.106.
4.53 Sqm
Providing and casting reinforced cement concrete racks with design mix M20,
granite or trap jelly 12mm and down size 5 cms thick and below with
reinforcements of 6mm dia MS bars at 15 cms. Centre to centre for main
reinforcement and at 30cms centre to centre for distribution including supports
wherever necessary with burnt brick in CM 1:4 including centring, form work,
curing etc., complete (inclusive of cost of steel and fabrication charges).

4.54 Providing RCC loft (atta) 7.5cms thick with cement concrete design mix M20 Sqm
using clean granite or trap jelly of 20mm and down size with necessary
reinforcements at 20cms centre to centre as per design including form work,
centring, curing, etc., complete (exclusive of cost of steel and fabrication
charges).
4.55 Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and Sqm
down size jelly cement concrete design mix M20 including CM 1:3 plaster
finishing, curing etc., complete (excluding the cost of steel and fabrication
charges
4.56.1 Providing RCC design mix M20 using granite metal 20mm and down size for Sqm
7.5 cms thick solid parapet or perforated as per design, specification and
directions.(exclusive of cost of steel and fabrication charges) including
necessary centring, form work and finishing smooth with CM (1:3) etc.,
complete. - 7.5 cms thick
4.56.2 Providing RCC design mix M20 using granite metal 20mm and down size for Sqm
7.5 cms thick solid parapet or perforated as per design, specification and
directions.(exclusive of cost of steel and fabrication charges) including
necessary centring, form work and finishing smooth with CM (1:3) etc.,
complete. - 10cms thick
4.57 Providing and mixing Alkali resistant glass fibres HD12 to arrest plastic cum
shrinkage cracks and to provide as a secondary reinforcement in concrete at
600 gms/cum of concrete and containing minimum 127 millions of fibres of
length 12 mm , diameter 14 microns specific gravity 2.68, modulus of elasticity
72 Gpa and having the aspect ratio (length / dia) of 857, including cost of
labour, materials and HOM of machineries etc complete (Note: Rate of cum of
concrete)
4.58 Providing and laying pervious concrete of mix M20 with OPC 320 kgs with cum
20mm size metal coarse aggregate at 0.69 cum and 12mm size aggregates at
0.43 cum with chemical admixture at 1.44 kg/cum machine mixed, laid in layer
not exceeding 15 em thick well compacted for foot path, drain bed, all round
building premises, parking area etc., including cost of all materials, labour,
HOM curing complete as per specifications.
Basic Rate
5,635.00

5,534.00

5,439.00

5,354.00

5,696.00

5,893.00

5,766.00

153.00

220.00
6,212.00

6,051.00

6,445.00

6,284.00

468.00
 528.00

33.00

14.00

14.00

209.00

155.00

124.00

1,097.00

258.00

400.00

580.00

750.00

920.00
1,170.00

1,430.00

1,690.00

1,940.00

2,190.00

2,460.00

2,780.00

3,080.00

440.00

358.00

456.00
917.00

292.00

403.00

757.00

323.00

521.00

512.00

597.00

512.00

811.00

336.00
252.00

120.00

250.00

290.00

58.00

58.00
70,307.00

70,958.00

748.00

5,444.00

5,444.00

5,497.00

5,598.00

5,804.00
6,009.00

5,084.00

5,187.00

5,392.00

5,710.00

5,893.00
 655.00

360.00

1,031.00

458.00

640.00

448.00

677.00

300.00

5,381.00
Item No. Description Unit
5.1 KSRB 5-1.1 : Providing and constructing granite / trap / basalt rubble stone cum
masonry in foundation with mud mortar (uncoursed), bond stones at two m.
apart in each course including cost of materials, labour, curing complete as per
specifications. KBS 5.1.12
5.2 KSRB 5.1-2 : Providing and constructing granite / trap / basalt rubble stone cum
masonry in foundation with cement mortar 1:8 (uncoursed), bond stones at two
m. apart in each course including cost of materials, labour, curing complete as
per specifications.KBS 5.1.12
5.3 KSRB 5.1-3 : Providing and constructing granite / trap / basalt rubble stone cum
masonry in foundation with cement mortar 1:6 (uncoursed), bond stones at two
m. apart in each course including cost of materials, labour, curing complete as
per specifications.KBS 5.1.12
5.4 KSRB 5.2-1 : Providing and constructing granite / trap / basalt size stone cum
masonry in foundation with mud mortar, stone hammerd dressed in courses
not less than 20 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications. KBS
5.1.12
5.5 KSRB 5.2-2 : Providing and constructing granite / trap / basalt size stone cum
masonry in foundation with cement mortar 1:8, stone hammerd dressed in
courses not less than 20 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications. KBS
5.1.13
5.6 KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone cum
masonry in foundation with cement mortar 1:6, stone hammerd dressed in
courses not less than 20 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications. KBS
5.1.13
5.9 KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone cum
masonry in basement with cement mortar 1:6, edges of stones chistle dressed
in courses not less than 15 cms high, bond stones at two m. apart in each
course including cost of materials, labour, curing complete as per
specifications. KBS 5.1.13
5.12 KSRB 5.4-3 : Providing and constructing granite / trap / basalt size stone cum
masonry in superstructure with cement mortar 1:6 , edges of stones chistle
dressed in courses not less than 15 cms high, bond stones at two m. apart in
each course including cost of materials, labour, scaffolding, curing complete as
per specifications. KBS 5.1.13
5.13 KSRB 5.4-4 : Providing and constructing granite / trap / basalt size stone cum
masonry in superstructure with cement mortar 1:4 , edges of stones chistle
dressed in courses not less than 15 cms high, bond stones at two m. apart in
each course including cost of materials, labour, scaffolding, curing complete as
per specifications. KBS 5.1.13
5.14 KSRB 5-5 : Extra lift charges for size stone masonry above ground floor for cum
every additional floor. KBS 5.1.13
5.15 KSRB 5-6 : Extra for constructing stone masonry in square or rectangular cum
pillars complete as per specifications. KBS 5.1.13
5.16 KSRB 5-7 : Extra for constructing masonry in circular pillars including cost of cum
extra materials and labour complete as per specifications. KBS 5.1.13
5.17 KSRB 5-8.1 : Providing one line dressing to granite stone slab / granite stone Sqm
masonry as per specifications .KBS 5.1.13
5.18 KSRB 5-8.2 : Providing two line dressing to granite stone slab / granite stone Sqm
masonry as per specifications. KBS 5.1.13
5.19 KSRB 5-8.3 : Proiding three line dressing to granite stone slab / granite stone Sqm
masonry as per specifications. KBS 5.1.13
5.2 KSRB 5-8.4 : Providing pulmane finish only on three line dressed surface as Sqm
per specifications. KBS 5.1.13
5.21 KSRB 5-8.5 : Providing quoin dressing to stone masonry and stone slabs, two M
line 5 cms wide on each face as per specifications.(measurement including
mortar joints). KBS 5.1.13
5.22 KSRB 5-9 : Providing chamfering edges to stone slab 2.5 cms. wide as per M
specifications. (only chamfered length shall be recorded) KBS 5.1.13
5.23 KSRB 5-10 : Providing hammer dressing to size stones as per specifications. No
KBS 5.1.13.3
5.24.1 KSRB 5-11: Providing and constructing load bearing wall with cement concrete Sqm
cavity blocks (Hollow blocks) Grade B having a minimum face shell thickness
of 30mm and web thickness of 25mm with block density between 1100kglm3
and 1500kglm3 having a minimum average compressive strength of 5.00
Nlmm2 confirming to IS 2185 (Part 1) : 2005 and constructed with CM 1:4, as
per IS 2572:2005 including cost of all materials, labour charges, scaffolding,
curing, hire charges of machineries etc., complete as per specifications.KBS
No.5.4 with cement concrete cavity blocks (Hollow blocks) of size
400x200x200 mm

5.24.2 KSRB 5-11: Providing and constructing load bearing wall with cement concrete Sqm
cavity blocks (Hollow blocks) Grade B having a minimum face shell thickness
of 30mm and web thickness of 25mm with block density between 1100kglm3
and 1500kglm3 having a minimum average compressive strength of 5.00
Nlmm2 confirming to IS 2185 (Part 1) : 2005 and constructed with CM 1:4, as
per IS 2572:2005 including cost of all materials, labour charges, scaffolding,
curing, hire charges of machineries etc., complete as per specifications.KBS
No.5.4 with cement concrete cavity blocks (Hollow blocks) of size
400x150x200 mm

5.25.1 KSRB 5-12: Providing and constructing load bearing wall with cement concrete Sqm
cavity blocks (Hollow blocks) Grade B having a minimum face shell thickness
of 30mm and web thickness of 25mm with block density between 1100kglm3
and 1500kglm3 having a minimum average compressive strength not less than
3.5 Nlmm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4,
as per IS 2572:2005 including cost of all materials, labour charges, scaffolding,
curing, hire charges of machineries etc., complete as per specifications. KBS
No.5.4 with cement concrete cavity blocks (Hollow blocks) of size
400x200x200mm

5.25.2 KSRB 5-12: Providing and constructing load bearing wall with cement concrete Sqm
cavity blocks (Hollow blocks) Grade B having a minimum face shell thickness
of 30mm and web thickness of 25mm with block density between 1100kglm3
and 1500kglm3 having a minimum average compressive strength not less than
3.5 Nlmm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4,
as per IS 2572:2005 including cost of all materials, labour charges, scaffolding,
curing, hire charges of machineries etc., complete as per specifications. KBS
No.5.4 with cement concrete cavity blocks (Hollow blocks) of size
400x150x200mm

5.26.1 KSRB 5-14: Providing and constructing load bearing wall with solid concrete Sqm
blocks having block density not less than 1800kg/m3 having a minimum
average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part
1)2005 and constructed with CM 1 A, as per IS 25722005 including cost of all
materials labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per specifications. KBS No.5.4 with solid concrete blocks of size
400x200x200mm

5.26.2 KSRB 5-14: Providing and constructing load bearing wall with solid concrete Sqm
blocks having block density not less than 1800kg/m3 having a minimum
average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part
1)2005 and constructed with CM 1 A, as per IS 25722005 including cost of all
materials labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per specifications. KBS No.5.4 with solid concrete blocks of size
400x150x200mm
5.27.1 KSRB 5-14.1 : Providing and constructing load bearing wall with solid concrete Sqm
blocks having block density not less than 1800kg/m3 having a minimum
average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1)
2005 and constructed with CM 1 A, as per IS 25722005 including cost of all
materials labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per specifications. KBS No.5.4 with solid concrete blocks of size
400x200x200mm

5.27.2 KSRB 5-14.1 : Providing and constructing load bearing wall with solid concrete Sqm
blocks having block density not less than 1800kg/m3 having a minimum
average compressive strength of 5.00 N/mm2 confirming to IS 2185 (Part 1)
2005 and constructed with CM 1 A, as per IS 25722005 including cost of all
materials labour charges, scaffolding, curing, hire charges of machineries etc.,
complete as per specifications. KBS No.5.4 with solid concrete blocks of size
400x150x200mm

5.28 KSRB 5-15: Providing and constructing non load bearing wall with solid Sqm
concrete blocks of size 400x100x200mm having a block density not less than
1800kg/m3 having a minimum average compressive strength of 4.00 N/mm2
confirming to IS 2185 (Part 1)2005 and constructed with CM 1:4, as per IS
2572:2005 including cost of all materials, labour charges, scaffolding, curing,
hire charges of machineries etc., complete as per specifications. KBS No.5.4

5.29.1 Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 No
and finished with CM 1:3 plastering and finishing cutting etc., complete. - of
size 450 x 200 x 400 mm
5.29.2 Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 No
and finished with CM 1:3 plastering and finishing cutting etc., complete. - of
size 450 x 150 x 500 mm
5.3 Providing and fixing pre cast solid cement concrete kerb stones made out of No
C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm
high and 450mm in length finished with CM 1:3 plastering and finishing cutting,
including form work, curing, including cost of all materials, labour, hire charges
of machinery, loading, unloading, lead and lift, transportation etc., complete.

5.31.1 Providing granite slabs of selected quality roughly dressed and fixed in cement Sqm
mortar (1:6) including fixing curing etc., complete. - 7.5 cms thick
5.31.2 Providing granite slabs of selected quality roughly dressed and fixed in cement Sqm
mortar (1:6) including fixing curing etc., complete. - 10 cms thick
5.32 Removing B.S. slab of Drain and stacking. Sqm
5.33 Refixing stone slabs of drains and pointing in C.M (1:3). Sqm
Basic Rate
2,358.00

3,582.00

3,705.00

3,502.00

4,540.00

4,644.00

5,532.00

5,833.00

6,058.00

312.00

489.00

1,109.00

897.00

1,495.00

2,092.00

591.00
150.00

58.00

11.00

920.00

907.00

920.00

895.00

965.00

928.00
915.00

954.00

813.00

467.00

457.00

421.00

703.00

914.00

99.00
107.00
Item No. Description Unit
6.1 KSRB 6-1.1 :Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 3.5 Newton
per sqmm with mud mortar for basement and superstructure including cost of
materials, labour charges, scaffolding, curing complete as per specifications
Specification No. KBS 6.2.
6.2 KSRB 6-1.2 : Providing and constructing burnt brick masonry for basement cum
and superstructure with approved quality of non-modular bricks of standard
size of class designation 3.5Newton per sqmm with cement mortar1:8
including cost of materials, labour charges, scaffolding, curing complete as per
specifications. Specification No. KBS 6.2
6.3 KSRB 6-1.3 : Providing and constructing burnt brick masonry for basement cum
and superstructure with approved quality of non-modular bricks of standard
size of class designation 3.5Newton per sqmm with cement mortar1:6
including cost of materials, labour charges, scaffolding, curing complete as per
specifications. Specification No. KBS 6.2
6.5 KSRB 6-2.2 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 5.0Newton
per sqmm (table moulded) with cement mortar 1:8 for basement and
superstructu/re including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.6 KSRB 6-2.3 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 5.0Newton
per sqmm (table moulded) with cement mortar 1:6 for basement and
superstructu/re including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.7 KSRB 6-2.4 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 5.0 Newton
per sqmm with cement mortar 1:4 for basement and superstructure including
cost of materials, labour charges, scaffolding, curing complete as per
specifications. Specification No. KBS 6.2
6.8 KSRB 6-3.1 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:8 for basement and superstructure (Machine
moulded Wirecut bricks) with cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.9 KSRB 6-3.2 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:6 for basement and superstructure (Machine
moulded Wirecut bricks) with cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.10 KSRB 6-3.3 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:4 for basement and superstructure (Machine
moulded Wirecut bricks) with cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.11 KSRB 6-3.4 : Providing and constructing burnt brick masonry with approved cum
quality of non-modular bricks of standard size of class designation 7.5Newton
per sqmm with cement mortar 1:3 for basement and superstructure (Machine
moulded Wirecut bricks) with cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2
6.13 KSRB 6-4.2 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks ground moulded of standard size of class designation
3.5Newton per sqmm with cement mortar 1:8 for basement and superstructure
with cost of materials, labour charges, scaffolding, curing complete as per
specifications. Specification No. KBS 6.2

6.14 KSRB 6-4.3 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks ground moulded of standard size of class designation
3.5Newton per sqmm with cement mortar 1:6 for basement and superstructure
with cost of materials, labour charges, scaffolding, curing complete as per
specifications. Specification No. KBS 6.2

6.16 KSRB 6-5.2 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 5.0Newton per
sqmm (table moulded) with cement mortar 1:8 for basement and
superstructure including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.17 KSRB 6-5.3 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 5.0Newton per
sqmm (table moulded) with cement mortar 1:6 for basement and
superstructure including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.18 KSRB 6-5.4 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 5.0Newton per
sqmm (table moulded) with cement mortar 1:4 for basement and
superstructure including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.19 KSRB 6-6.1 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:8 for basement
and superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.20 KSRB 6-6.2 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:6 for basement
and superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.21 KSRB 6-6.3 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:4 for basement
and superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.22 KSRB 6-6.4 : Providing and constructing burnt brick masonry with approved cum
quality of modular bricks of standard size of class designation 7.5Newton per
sqmm (Machine moulded Wirecut bricks) with cement mortar 1:3 for basement
and superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2
6.23 KSRB 6-7.1 : Construction of partition wall 11.2 cms thick with non modular Sqm
ground moulded burnt bricks of class designation 3.5 Newton per sqmm with
cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured
out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm. wide
as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour
charges, scaffolding, curing complete as per specifications. Specification No.
KBS 6.2

6.24 KSRB 6-7.2 : Construction of partition wall 11.2 cms thick with non modular Sqm
ground moulded burnt bricks of class designation 5.0 Newton per sqmm with
cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured
out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm. wide
as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour
charges, scaffolding, curing complete as per specifications. Specification No.
KBS 6.2

6.25 KSRB 6-7.3 : Construction of partition wall 11.2 cms thick with non-modular Sqm
ground moulded burnt bricks of class designation 3.5 Newton per sqmm with
cement mortar 1:4 including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.26 KSRB 6-7.4 : Construction of partition wall 11.2 cms thick with non-modular Sqm
ground moulded burnt bricks of class designation 5.0 Newton per sqmm with
cement mortar 1:4 including cost of materials, labour charges, scaffolding,
curing complete as per specifications. Specification No. KBS 6.2

6.27 KSRB 6-8.1 :Construction of partition wall 10 cms thick with ground moulded Sqm
modular burnt bricks of class designation 3.5 Newton per sqmm with cement
mortar 1:4 including providing and fixing plaster mesh manufactured out of hot
dipped gelvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per
I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour charges,
scaffolding, curing complete as per specifications. Specification No. KBS 6.2

6.28 KSRB 6-8.2 : Construction of partition wall 10 cms thick with table moulded Sqm
modular burnt bricks of class designation 5.0Newton per sqmm with cement
mortar 1:4 including providing and fixing plaster mesh manufactured out of hot
dipped gelvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per
I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour charges,
scaffolding, curing complete as per specifications. Specification No. KBS 6.2

6.29 KSRB 6-8.3 :Construction of partition wall 10 cms thick with ground moulded Sqm
modular burnt bricks of class designation 3.5Newton per sqmm with cement
mortar 1:4 including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.30 KSRB 6-8.4 : Construction of partition wall 10 cms thick with table moulded Sqm
modular burnt bricks of class designation 5.0 Newton per sqmm with cement
mortar 1:4 including cost of materials, labour charges, scaffolding, curing
complete as per specifications. Specification No. KBS 6.2

6.31 Providing and constructing approved quality of standard size precast FLY ASH cum
brick masonry with compresive strength not less than 3.5 Newton per sqmm
with cement mortar 1:6 for basement and superstructure with cost of materials,
labour charges, scaffolding, curing complete as per specifications
6.32.1 Provinding and constructing non load bearing wall with Light Weight Concrete Sqm
(Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3) 1984 and
IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin layer of
polymer based jointing solvent for super structure with neccesary scaffolding,
curing including cost of all materials, labour, lead& lift etc, complete as per
specifications. - with 600x200x100mm size Blocks

6.32.2 Provinding and constructing non load bearing wall with Light Weight Concrete Sqm
(Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3) 1984 and
IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin layer of
polymer based jointing solvent for super structure with neccesary scaffolding,
curing including cost of all materials, labour, lead& lift etc, complete as per
specifications. - with 600x200x150mm size Blocks

6.32.3 Provinding and constructing non load bearing wall with Light Weight Concrete Sqm
(Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3) 1984 and
IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin layer of
polymer based jointing solvent for super structure with neccesary scaffolding,
curing including cost of all materials, labour, lead& lift etc, complete as per
specifications. - with 600x200x200mm size Blocks

6.32.4 Provinding and constructing non load bearing wall with Light Weight Concrete Sqm
(Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3) 1984 and
IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin layer of
polymer based jointing solvent for super structure with neccesary scaffolding,
curing including cost of all materials, labour, lead& lift etc, complete as per
specifications. - with 600x200x230mm size Blocks
Basic Rate
5,109.00

6,098.00

6,187.00

6,734.00

6,846.00

7,039.00

8,442.00

8,531.00

8,725.00

8,918.00
6,280.00

6,358.00

7,209.00

7,287.00

7,456.00

9,526.00

9,604.00

9,773.00

9,943.00
 834.00

937.00

811.00

901.00

765.00

867.00

724.00

831.00

5,258.00
1,125.00

1,504.00

1,694.00

2,067.00
Item No. Description Unit
7.1 KSRB 7.1 : Providing and fixing in position collapsible steel shutters with single or Sqm
double leaf with vertical channel 20mmx10mmx2mm braced with flat iron diagonals
20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6 mm with
38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers,
handles on both sides with 7.5cms openings at 10 cms. c to c applying a priming coat
of red lead paint. cost of materials, labour, HOM of machinery complete as per
specifications. size of gate 2.4mx1.4m. Specification No. KBS 7.7 / 7.12

7.2 KSRB 7.2 : Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and Sqm
diagonal braces of 40x40x6 mm angle Iron 3.15mm thick M.S. Gusset plates at
junctions and corners, 25mm dia pulley, 40x40x6 mm angles and T iron guide rail top
and bottom respectively with handles, stoppers and locking arrangements etc.,
including applying a priming coat of red lead paint cost of materials, labour, HOM of
machinery complete as per specifications. 1 double leaf door of size 2.4x2.4m.
Specification No. KBS 7.8 / 7.12

7.3 KSRB 7.3 : Providing and fixing 1mm thick M.S. sheet garage door with frame and Sqm
diagonal braces of size 40x40x6 mm angle Iron, 3.15mm thick M.S. Gusset plates at
the junctions and corners, with handles, stoppers and locking arrangements etc.,
including applying a priming coat of red lead paint cost of materials, labour, HOM of
machinery complete as per specifications. Double leaf door of size 2.4x2.4m.
Specification No. KBS 7.9 / 7.12

7.4 KSRB 7.4 : Providing and fixing 1mm thick M.S. sheet garage door with frame and Sqm
diagonal braces of size 40x40x6 mm angle Iron, using M.S. flats 30x6 mm for diagonal
braces and central cross pieces 3.15mm thick M.S. Gusset plates at the junctions and
corners, with handles, stoppers and locking arrangements etc., including applying a
priming coat of red lead paint cost of materials, labour, HOM of machinery complete as
per specifications. 1 double leaf door of size 2.4x2.4m. Specification No. KBS 7.9 /
7.12

7.5 KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make Sqm
out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side
guides and bottom rail, with interlocking arrangements for steel laths by means of
alternate clips, suspension shaft with High tension coil type springs two numbers,
mounted on specially designed pipe shaft, with bracket plates, guide channels, ball
bearing arrangements, for inside & outside locking with push & pull operations
complete including pulling hooks, 4Nos. handles with all fittings and accessories,
painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM
of machinery complete as per specifications. Shutter size 3mx2.8 m. Specification No.
KBS 7.10 / 7.12

7.6 KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet over pull M
and push rolling shutters bent to shape including cost of red lead primer coat of
painting , materials, labour, HOM of machinery complete as per specifications.
Specification No. KBS 7.10.6 / 7.12
7.7 KSRB 7.7 : Providing and fixing in position in cement concrete 1:3:6 steel glazed Sqm
windows and ventilators side hung/top hung fully openable as per approved drawings
using Z angles of 25x33x3mm, weighing 1.419 Kg/m both for outer and inner frames
and central mullion section of size 25x46x3mm. weighing 2.28Kg/m duly providing T
section 19x19x3mm weighing 0.839 kg/m for glazing of windows not more than 34
cms. c to c including providing and fixing 4mm. thick reeded glass with teakwood
beading of required size, all steel sections should confirm to I.S 7452:1990, 4nos. of
holdfasts of approved size, section should be cut to length welded and electrically
grinded subdividing frames of unit shall be tenonned and revetted into the frames
electrically. All the steel surface shall be throughly cleaned free of rust and painted with
one coat of anti-corosive paint and finishing with two coats of ready mix paint of
approved colour and make including cost of materials, fixtures, labour and HOM of
machinerycomplete as per specifications. Specification No. KBS 7.12.1 / 7.12.2 /
7.12.3 / 7.12
 7.8 KSRB 7.8 : Providing and fixing in position in cement concrete 1:3:6 steel glazed Sqm
windows and ventilators side hung/top hung 2/3 openable 1/3 fixed as per approved
drawings using Z angles of 25x33x3mm, weighing 1.419 kg/m both for outer and inner
frames and central mullion section of size 25x46x3mm, weighing 2.28kg/m all duly
providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows, not more
than 34 cms. c to c including providing and fixing 4mm. thick reeded glass with
teakwood beading of required size, all steel sections should confirm to I.S 7452:1990,
4nos. of holdfasts of approved size, section should be cut to length welded and
grinded electrically subdividing frames of unit shall be tenonned and revetted into the
frames electrically. All the steel surface shall be throughly cleaned free of rust and
painted with one coat of anti-corrosive paint and finishing two coats of ready mix paint
of approved colour and make including cost of materials, fixtures, labour charges and
HOM of machinery complete as per specifications.

7.9 KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators weighing kgs
21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and
square rods as per approved design, drawing including cutting steel sections and
welding the same to required pattern with a coat of red lead primer, cost of materials,
fixtures, labour and HOM of machinery complete as per specifications. Specification
No. KBS 7.12

7.10.1 KSRB 7.10 : Providing and fixing in position aluminium windows and ventilators as per Sqm
approved drawings with sliding shutters using double track window frame section of
size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and
top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom
section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side
40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section
40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon
rollers with approved quality of fixtures such as aluminium handles tower bolts etc.;
and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading
aluminium sections including cutting to required length, joints mitred subdividing the
frame tenonned and rivetted in the assembled frame stiffened with end clips at corners
angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with
necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar, aluminium
sections pretreated for removal of any Specification No. KBS using aluminium section
anodized to 12 - 15 microns.

7.10.2 KSRB 7.10 : Providing and fixing in position aluminium windows and ventilators as per Sqm
approved drawings with sliding shutters using double track window frame section of
size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and
top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom
section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side
40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section
40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon
rollers with approved quality of fixtures such as aluminium handles tower bolts etc.;
and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading
aluminium sections including cutting to required length, joints mitred subdividing the
frame tenonned and rivetted in the assembled frame stiffened with end clips at corners
angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with
necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar, aluminium
sections pretreated for removal of any Specification No. KBS using aluminium section
powdered coated to a minimum of 60-70 microns with exterior durable pure polyester
grade powder of approved quality.
7.11.1 KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per Sqm
approved drawings with sliding shutters using three track window frame of size
92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3
mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section
of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer
40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section
40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted
on nylon rollers with approved quality of fixtures such as aluminium handles tower
bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber
beading all aluminium sections including cutting to required length, joints mitred
subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with
end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the
case may be, with necessary steel screws, raul plugs or teak wood gatties including
cutting masonry or concrete and making good the original surface using cement
mortar. using aluminium section anodized to 12 - 15 microns.

7.11.2 KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per Sqm
approved drawings with sliding shutters using three track window frame of size
92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3
mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section
of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer
40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section
40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted
on nylon rollers with approved quality of fixtures such as aluminium handles tower
bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber
beading all aluminium sections including cutting to required length, joints mitred
subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with
end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the
case may be, with necessary steel screws, raul plugs or teak wood gatties including
cutting masonry or concrete and making good the original surface using cement
mortar. using aluminium section powdered coated to a minimum of 60-70 microns with
exterior durable pure polyester grade powder of approved quality.

7.12.1 KSRB 7.12 : Providing and fixing in position aluminium windows and ventilators as per Sqm
approved drawings with sliding shutters using four track window frame of size
122.2x31.75mm. for bottom section 1.1mm thick, weight 1.205 kg/m; sides and top
sections 1.2 mm. thick weight 1.093 kg/m; shutter section comprising top and bottom
section of size 40mmx18mm wall thickness 1.25mm. weight 0.417 kg./m, shutter
sideouter 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock
section 40mmx26.7mm wall thickness 1.1 mm. weight 0.469 kg/m; shutters mounted
on nylon rollers with approved quality of fixtures such as aluminium handles, tower
bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber
beading including cutting to required length, joints mitred subdividing the frame,
tenonned and rivetted in the assembled frame to be stiffened with end clips at corners,
angles etc.; fixed to the walls, lintels, floor beams;cills, as the case may be with
necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar; aluminium
sections pretreated for removal of any rust and coated with greasy materials for non
adhesion of mortar and other sticky materials; ( this coating should be cleaned after
installation ) including cost of materials, fixtures, labour and HOM of machinery
complete as per specifications. using aluminium section anodized to 12 - 15 microns.
7.12.2 KSRB 7.12 : Providing and fixing in position aluminium windows and ventilators as per Sqm
approved drawings with sliding shutters using four track window frame of size
122.2x31.75mm. for bottom section 1.1mm thick, weight 1.205 kg/m; sides and top
sections 1.2 mm. thick weight 1.093 kg/m; shutter section comprising top and bottom
section of size 40mmx18mm wall thickness 1.25mm. weight 0.417 kg./m, shutter
sideouter 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock
section 40mmx26.7mm wall thickness 1.1 mm. weight 0.469 kg/m; shutters mounted
on nylon rollers with approved quality of fixtures such as aluminium handles, tower
bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber
beading including cutting to required length, joints mitred subdividing the frame,
tenonned and rivetted in the assembled frame to be stiffened with end clips at corners,
angles etc.; fixed to the walls, lintels, floor beams;cills, as the case may be with
necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar; aluminium
sections pretreated for removal of any rust and coated with greasy materials for non
adhesion of mortar and other sticky materials; ( this coating should be cleaned after
installation ) including cost of materials, fixtures, labour and HOM of machinery
complete as per specifications. using aluminium section powdered coated to a
minimum of 60-70 microns with exterior durable pure polyester grade powder of
approved quality.

7.13.1 KSRB 7.13 : Providing and fixing aluminium casement windows, combination of fixed Sqm
glazing at top fully openable windows using Z sections of 33mm, web thickness 4mm,
weight 0.663 kg/m; central mullion section 59x33mm with web thickness 3mm section
weight 1.123kg/m; the shutters on aluminium hinges with approved quality of fixtures
such as aluminium tower bolts, handles, stays etc., providing and fixing 5.5mm plain
glass for shutters fitted with glazed clips 19mmx17.3mmx11mm. 0.9mm thick and
rubber beading, aluminium sections cutting to required length, joints metered,
subdividing the frame tennoned and rivetted, assembled frame to be stiffened with end
clips at corner, angles and fixed to wall, lintel beam, floor;cill, as the case may be with
necessary screws, rawl plugs, cutting masonry or concrete and making good the
orginal surface; aluminium surface pretreated for removal of any rust and coated with
greasy materials for nonadherence of mortar or any other sticky materials; (coating
removed after instalation) and throughly cleaned free from dirt, rust etc., including cost
of materials, fixtures, labour and HOM of machinery complete as per specifications.
using aluminium section anodized to 12 - 15 microns.

7.13.2 KSRB 7.13 : Providing and fixing aluminium casement windows, combination of fixed Sqm
glazing at top fully openable windows using Z sections of 33mm, web thickness 4mm,
weight 0.663 kg/m; central mullion section 59x33mm with web thickness 3mm section
weight 1.123kg/m; the shutters on aluminium hinges with approved quality of fixtures
such as aluminium tower bolts, handles, stays etc., providing and fixing 5.5mm plain
glass for shutters fitted with glazed clips 19mmx17.3mmx11mm. 0.9mm thick and
rubber beading, aluminium sections cutting to required length, joints metered,
subdividing the frame tennoned and rivetted, assembled frame to be stiffened with end
clips at corner, angles and fixed to wall, lintel beam, floor;cill, as the case may be with
necessary screws, rawl plugs, cutting masonry or concrete and making good the
orginal surface; aluminium surface pretreated for removal of any rust and coated with
greasy materials for nonadherence of mortar or any other sticky materials; (coating
removed after instalation) and throughly cleaned free from dirt, rust etc., including cost
of materials, fixtures, labour and HOM of machinery complete as per specifications.
using aluminium section powdered coated to a minimum of 60-70 microns with exterior
durable pure polyester grade powder of approved quality.
7.14.1 KSRB 7.14 : Providing, fabricating, assembling and fixing in position aluminium Sqm
partitions using sections in combination of plain, single grove and double grove as per
requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having
section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double
grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size
77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided
with 12mm. thick prelaminated sheet both side of approved colour lamination exterior
grade; aluminium sections of mat finish or glossy finish using section, spacing of
vertical member shall not exceed 0.6 m. c to c; sections are cut to the required
lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted
to the frames, the assembled frame should be stiffened with corner angles stripped
and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry
on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling
and making good with cement mortar to match the surface, providing and fixing bottom
panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick
plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections,
the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of
0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and
prevention of further rust formation, and coated with greasy materials for non-
adherence of mortars or any other sticky materials; vertical members embedded in the
flooring by making suitable size holes and fixing with cement mortar, with necessary
opening for fixing of doors of standard size (excluding cost of door opening) All the
frame should be throughly cleaned free from rust, scale or dirt including cost of
materials, fixtures, labour and HOM of machinery complete as per specifications. using
aluminium section anodized to 12 - 15 microns.

7.14.2 KSRB 7.14 : Providing, fabricating, assembling and fixing in position aluminium Sqm
partitions using sections in combination of plain, single grove and double grove as per
requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having
section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double
grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size
77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided
with 12mm. thick prelaminated sheet both side of approved colour lamination exterior
grade; aluminium sections of mat finish or glossy finish using section, spacing of
vertical member shall not exceed 0.6 m. c to c; sections are cut to the required
lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted
to the frames, the assembled frame should be stiffened with corner angles stripped
and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry
on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling
and making good with cement mortar to match the surface, providing and fixing bottom
panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick
plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections,
the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of
0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and
prevention of further rust formation, and coated with greasy materials for non-
adherence of mortars or any other sticky materials; vertical members embedded in the
flooring by making suitable size holes and fixing with cement mortar, with necessary
opening for fixing of doors of standard size (excluding cost of door opening) All the
frame should be throughly cleaned free from rust, scale or dirt including cost of
materials, fixtures, labour and HOM of machinery complete as per specifications. using
aluminium section powdered coated to a minimum of 60-70 microns with exterior
durable pure polyester grade powder of approved quality.
7.15.1 KSRB 7.15 : Providing, fabricating, assembling and fixing in position aluminium Sqm
partitions using aluminium sections of mat finish or glassy finish in combination of plain
grove, single grove and double grove as per requirements for the frames of overall
size 63.5mm x 38.1mm. with thickness of 2mm. having section weight, plain sections
1.054kg/m, single grove thickness 1.95mm. section weight 1.094kg/m, double grove
thickness 1.9mm section weight 1.094kg/m and bottom member 114.3 mm. x
44.45mm. thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size
36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions provided
with 12mm. thick prelaminated sheet both sides of approved colour lamination exterior
grade upto 0.9m height, spacing of vertical member not exceeding 0.6 m. c to c;
sections are cut to the required lengths, joints mitered and corners grinded subdividing
frames tennoned and rivetted to the frames; the assembled frame stiffened with corner
angles, stripped and fixed with screws, rawl plugs and teak wood gutties to
R.C.C.columns on sides, R.C.C. lintels or beams at top and floor at bottom, including
cutting chistelling and making good with cement mortar to match the surface; providing
and fixing 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top
panel with louvres sections; the glass and panels fitted withglazing clips of
19mmx17.3mm. of thickness 0.9mm. weight 0.124kg/ m, aluminium sections treated
for removal of any rust and prevention of further rust formation, coated with greasy
materials for non-adherence of mortars or any other sticky materials; vertical members
embedded in the flooring by making suitable sized holes and fixing with cement
mortar, with necessary opening for fixing of door of standard size (excluding cost of
door ) all the frame throughly cleaned, free from rust, scale or dirt including cost of
materials, fixtures, labour and HOM of machinery complete as per specifications. using
aluminium section anodized to 12 - 15 microns.

7.15.2 KSRB 7.15 : Providing, fabricating, assembling and fixing in position aluminium Sqm
partitions using aluminium sections of mat finish or glassy finish in combination of plain
grove, single grove and double grove as per requirements for the frames of overall
size 63.5mm x 38.1mm. with thickness of 2mm. having section weight, plain sections
1.054kg/m, single grove thickness 1.95mm. section weight 1.094kg/m, double grove
thickness 1.9mm section weight 1.094kg/m and bottom member 114.3 mm. x
44.45mm. thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size
36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions provided
with 12mm. thick prelaminated sheet both sides of approved colour lamination exterior
grade upto 0.9m height, spacing of vertical member not exceeding 0.6 m. c to c;
sections are cut to the required lengths, joints mitered and corners grinded subdividing
frames tennoned and rivetted to the frames; the assembled frame stiffened with corner
angles, stripped and fixed with screws, rawl plugs and teak wood gutties to
R.C.C.columns on sides, R.C.C. lintels or beams at top and floor at bottom, including
cutting chistelling and making good with cement mortar to match the surface; providing
and fixing 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top
panel with louvres sections; the glass and panels fitted withglazing clips of
19mmx17.3mm. of thickness 0.9mm. weight 0.124kg/ m, aluminium sections treated
for removal of any rust and prevention of further rust formation, coated with greasy
materials for non-adherence of mortars or any other sticky materials; vertical members
embedded in the flooring by making suitable sized holes and fixing with cement
mortar, with necessary opening for fixing of door of standard size (excluding cost of
door ) all the frame throughly cleaned, free from rust, scale or dirt including cost of
materials, fixtures, labour and HOM of machinery complete as per specifications. using
aluminium section powdered coated to a minimum of 60-70 microns with exterior
durable pure polyester grade powder of approved quality.
7.16.1 KSRB 7.16 : Providing, fabricating, assembling and fixing in position aluminium Sqm
shutters to the existing door frame in the partition using 47.62x44.45mm section
thickness 3.18mm, weight 1.505kg/m for vertical frame; 47.62x44.45 thickness of
3mm, weight 1.42kg/m for top section, 49.91mmx44.45mm with wall thickness 3mm,
weight 1.495kg/ m for central rail; and 114.3mmx44.45mm thickness 3.18mm, weight
2.646kg/m for bottom rail; aluminium sections and cut to length joint metred and
corners grinded, the bottom rail and top rail hinged or pivoted, opening arrangements
including providing and fixing standard approved accessories, such as aluminium
handles, tower bolts, lock, pivots: hinges P.V.C. or rubber gasket, 12mm prelaminated
sheets ( Novopan) exterior grade of approved colour both sides same colour for
bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel
( Novopan ) and glass fixed with glazed clips 19mmx17.3mmx11mm, 0.9mm thick,
weight 0.124kg/m; aluminium sections treated for removal of any rust and prevention
of further rust formation, and coated with greasy materials for non-adherance of
mortars or any other sticky materials, including cost of materials, fixtures, labour and
HOM of machinery complete as per specifications. using aluminium section anodized
to 12 - 15 microns.

7.16.2 KSRB 7.16 : Providing, fabricating, assembling and fixing in position aluminium Sqm
shutters to the existing door frame in the partition using 47.62x44.45mm section
thickness 3.18mm, weight 1.505kg/m for vertical frame; 47.62x44.45 thickness of
3mm, weight 1.42kg/m for top section, 49.91mmx44.45mm with wall thickness 3mm,
weight 1.495kg/ m for central rail; and 114.3mmx44.45mm thickness 3.18mm, weight
2.646kg/m for bottom rail; aluminium sections and cut to length joint metred and
corners grinded, the bottom rail and top rail hinged or pivoted, opening arrangements
including providing and fixing standard approved accessories, such as aluminium
handles, tower bolts, lock, pivots: hinges P.V.C. or rubber gasket, 12mm prelaminated
sheets ( Novopan) exterior grade of approved colour both sides same colour for
bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel
( Novopan ) and glass fixed with glazed clips 19mmx17.3mmx11mm, 0.9mm thick,
weight 0.124kg/m; aluminium sections treated for removal of any rust and prevention
of further rust formation, and coated with greasy materials for non-adherance of
mortars or any other sticky materials, including cost of materials, fixtures, labour and
HOM of machinery complete as per specifications. using aluminium section powdered
coated to a minimum of 60-70 microns with exterior durable pure polyester grade
powder of approved quality.
7.17.1 KSRB 7.17 : Providing, fabricating, assembling and fixing in position aluminium doors Sqm
using following aluminium mat finish or glossy finish, outer frame plain section
101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical
section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section
47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section
114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section
49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips
19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to
length joint metred cornersgrinded, the shutters pivoted opening arrangement with
heavy duty aluminium alloy automatic door closures floor mounted, providing and
fixing standard approved accessories, such as aluminium handle for full width or
length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for
top and bottom panel; aluminium sections treated for removal of any rust and
prevention of further rust formation, and coated with greasy materials for non-
adherance of mortars or any other sticky materials; the assembled frame fitted with the
corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C.
columns or masonry on sides. beams and flooring in bottom. including cutting, chistling
and making good with cement mortar to match the surface; all the frames throughly
cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and
HOM of machinery complete as per specifications. using aluminium section anodized
to 12 - 15 microns.

7.17.2 KSRB 7.17 : Providing, fabricating, assembling and fixing in position aluminium doors Sqm
using following aluminium mat finish or glossy finish, outer frame plain section
101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical
section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section
47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section
114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section
49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips
19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to
length joint metred cornersgrinded, the shutters pivoted opening arrangement with
heavy duty aluminium alloy automatic door closures floor mounted, providing and
fixing standard approved accessories, such as aluminium handle for full width or
length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for
top and bottom panel; aluminium sections treated for removal of any rust and
prevention of further rust formation, and coated with greasy materials for non-
adherance of mortars or any other sticky materials; the assembled frame fitted with the
corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C.
columns or masonry on sides. beams and flooring in bottom. including cutting, chistling
and making good with cement mortar to match the surface; all the frames throughly
cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and
HOM of machinery complete as per specifications. using aluminium section powdered
coated to a minimum of 60-70 microns with exterior durable pure polyester grade
powder of approved quality.

7.18 Providing and fixing of Aluminium composite panel of approved make and colour for Sqm
wall cladding for straight Brick!Rcc/8tone walls & columns/ beams with necessary
aluminium frame works at required level made out of 50x25x4mm C section or
equivalent. The panel should consist of 3mm thick non-halogonated FR grade mineral
based polymer core (2 hrs fire resistance as per A8TM E119-12 & clause B, 81, do as
per 88476 EN 13501) sandwiched between 0.50mm skin thick aluminium sheet
making a total panel thickness of 4mm. The surfaces will be finished with PVDF based
coating on topsides and service coating on reverse sides would be in polyester paint.
The system shall be fixed using Gl brackets, aluminium L cleats and stainless steel
bolts and nuts complete with spring washer and cap nuts and all other necessary
accessories, sealing shall be done using weather sealant of Dow Corning 789 with
necessary rods etc , complete.
7.19 Providing and fixing of Aluminium composite panel of approved make and colour for Sqm
wall cladding for curved Brick/Rcc/8tone walls & columns/beams with necessary
aluminium frame works at required level made out of 50x25x4mm C section or
equivalent The panel should consist of 3mm thick non-halogonated FR grade mineral
based polymer core (2 hrs fire resistance as per A8TM E119-12 & clause B, 81, do as
per, 88476 EN 13501) sandwiched between 0.50mm skin thick aluminium sheet
making a total panel thickness of 4mm. The surfaces will be finished with PVDF based
coating on topsides and service coating on reverse sides would be in polyester paint
The system shall be fixed using Gl brackets, aluminium L cleats and stainless steel
bolts and nuts complete with spring washer and cap nuts and all other necessary
accessories, sealing shall be done using weather sealant necessary rods etc.,
complete.

7.20 Providing, fabricating and fixing of stick type structural glazing using Alluminium Sqm
Extrusions of 63.5 mm x 58.00 mmx 2.25 mm of 1.73 kgs/ mtr for vertical and
Horizontal members and 63.5 mm x 38.1 x 1.33 mm of 0.759 kg/Mtr, as outer frame
with Electro Anodized Paint coated block finishing, using 6mm thick imported glass
reflective hard coatedocean blue raw glass with all necessary accesories like ultra
glass Silicon sealant of Space tape, Masking tape, Galvanized Anchaor bolt, machine
screws, 6mm thick M.S. angle 50mm x 150mm x 6mm M.S. Galvanized L Brackets,
structural sealent setting clocks, fasteners, wall connection etc., complete.

7.21.1 "Providing fusion bonded epoxy coating not less than 175 microns thickness and upto Tonne
300 microns to reinforcement of all diameters as per IS: 13620-1993 including testing
of coating at plant. The rate is inclusive of cost on account of careful handling, PVC
coated binding wire instead of GI Binding wire, touch up material supplied by coating
agency, repair work, loading, unloading and straightening of bent rods etc., complete
as per specification and as directed by the Engineer in charge. (Inclusive of all taxes
but excluding transportation charges) For 10mm to 16mm dia bars

7.21.2 "Providing fusion bonded epoxy coating not less than 175 microns thickness and upto Tonne
300 microns to reinforcement of all diameters as per IS: 13620-1993 including testing
of coating at plant. The rate is inclusive of cost on account of careful handling, PVC
coated binding wire instead of GI Binding wire, touch up material supplied by coating
agency, repair work, loading, unloading and straightening of bent rods etc., complete
as per specification and as directed by the Engineer in charge. (Inclusive of all taxes
but excluding transportation charges) For 20mm to 32mm dia bars

7.22.1 Providing , fabricating, assembling and fixing in position aluminium partition using Sqm
101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish , anodized
sections combination of plain , single groove and double groove members should not
exceed 0.60mc/c and bottom member of required lengths, joints mitred and corner
grinded sub dividing assembled frame should be stiffened with corner angles. Stripped
and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on
sides. RCC lintels or beams at top and mosaic floor at bottom; including cutting
chistelling and making good with cement mortar to match the surface .Providing and
fixing 12mm.thick prelaminated sheet (Ecoboard – exterior grade )of approved colour
for bottom panel of maximum height 0.9m, and 5.50 mm thick plain or pin headed
glass for middle panel and top panel with glazing clips pf
19.05mm.x17.30mm.1.00mm. All the aluminium sections used should be treated for
removal of any rust and prevention of further rust formation and coated with greasy
materials for non adherence of mortar or any other sticky materials: The vertical
members should be embedded in the flooring by making suitable size holes and fixing
with cement mortar. All the frame should be thoroughly cleaned free from rust , scale
or dirt. work should be carried out as per direction of engineer-in-charge of the work
with all lead and lift as per chief Architect’s drawing etc., complete to a degree of
perfection. using aluminium section anodized to 12 - 15 microns.
7.22.2 Providing , fabricating, assembling and fixing in position aluminium partition using Sqm
101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish , anodized
sections combination of plain , single groove and double groove members should not
exceed 0.60mc/c and bottom member of required lengths, joints mitred and corner
grinded sub dividing assembled frame should be stiffened with corner angles. Stripped
and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on
sides. RCC lintels or beams at top and mosaic floor at bottom; including cutting
chistelling and making good with cement mortar to match the surface .Providing and
fixing 12mm.thick prelaminated sheet (Ecoboard – exterior grade )of approved colour
for bottom panel of maximum height 0.9m, and 5.50 mm thick plain or pin headed
glass for middle panel and top panel with glazing clips pf
19.05mm.x17.30mm.1.00mm. All the aluminium sections used should be treated for
removal of any rust and prevention of further rust formation and coated with greasy
materials for non adherence of mortar or any other sticky materials: The vertical
members should be embedded in the flooring by making suitable size holes and fixing
with cement mortar. All the frame should be thoroughly cleaned free from rust , scale
or dirt. work should be carried out as per direction of engineer-in-charge of the work
with all lead and lift as per chief Architect’s drawing etc., complete to a degree of
perfection. using aluminium section powdered coated to a minimum of 60-70 microns
with exterior durable pure polyester grade powder of approved quality.

7.23 Providing and fixing door frame with or without ventilator made out of cold rolled steel Sqm
section of thickness 1.25mm formed into section of 60mm x 105mm welded to form a
rectangular door conforming to IS 513-1973 and phosphated and painted and with one
coat of red oxideprimer, two coat of approved enamel paints the frame work with 4nos.
of hold fast of size 200 x 25 x 4mm fixed in cement concrete 1:3 :6 of 20mm down size
jelly and 4nos. of ISI marked hinges 125mm long welded to the frame and fixed with
shutter made out of Honne wood styles and rails of 30mm thick with panels of 12mm
thick ‘Ecoboard’ Plain Particle Board of exterior grade conforming to IS- 3087
excluding the cost of fixtures but including labour charges for fixing of fixtures.. The
hollow portion of the frame to be filled with c.c1:2:4 of 20mm down size jelly.

7.24.1.a "Providing and fixing cold rolled prepainted steel windows of IS standards, made out of Sqm
0.6mm thick deep drawing quality galvanised on both sides 120gms/sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and finish painted with a polyester
based paint 20 microns thick. The size of profiles is approximately 46 x 52mm for
external frames, 46x46mm section for shutters, 46x70mm section for centre
mullion/transom and 18x31mm section is for fixing glasses. The section should be cut
to length joint mitred and assembling by means of corner brackets made out of cold
rolled cold annealed strips of 1.2mm thick duly galvanised and fixed with nickle plated
self taping screws.The shutters are provided with approved quality of fixtures like
handles made out of zamac alloy die cast and powder coated, receiver made out of
glass filled nylone and hinges made out of CRCA powder coated. 4mm thick glass
should be fixed with EPDM gaskets. Guard bars fabricated out of 10mm square bright
bars shall be fixed horizontally at 125mm C/C by rivetting to the external frame. The
above frames are fixed to the concrete / masonry walls by means of self expanding
screws.” with 4mm float glass without gaurd bars
7.24.1.b "Providing and fixing cold rolled prepainted steel windows of IS standards, made out of Sqm
0.6mm thick deep drawing quality galvanised on both sides 120gms/sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and finish painted with a polyester
based paint 20 microns thick. The size of profiles is approximately 46 x 52mm for
external frames, 46x46mm section for shutters, 46x70mm section for centre
mullion/transom and 18x31mm section is for fixing glasses. The section should be cut
to length joint mitred and assembling by means of corner brackets made out of cold
rolled cold annealed strips of 1.2mm thick duly galvanised and fixed with nickle plated
self taping screws.The shutters are provided with approved quality of fixtures like
handles made out of zamac alloy die cast and powder coated, receiver made out of
glass filled nylone and hinges made out of CRCA powder coated. 4mm thick glass
should be fixed with EPDM gaskets. Guard bars fabricated out of 10mm square bright
bars shall be fixed horizontally at 125mm C/C by rivetting to the external frame. The
above frames are fixed to the concrete / masonry walls by means of self expanding
screws.” with 4mm tinted glass without gaurd bars

7.24.1.c "Providing and fixing cold rolled prepainted steel windows of IS standards, made out of Sqm
0.6mm thick deep drawing quality galvanised on both sides 120gms/sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and finish painted with a polyester
based paint 20 microns thick. The size of profiles is approximately 46 x 52mm for
external frames, 46x46mm section for shutters, 46x70mm section for centre
mullion/transom and 18x31mm section is for fixing glasses. The section should be cut
to length joint mitred and assembling by means of corner brackets made out of cold
rolled cold annealed strips of 1.2mm thick duly galvanised and fixed with nickle plated
self taping screws.The shutters are provided with approved quality of fixtures like
handles made out of zamac alloy die cast and powder coated, receiver made out of
glass filled nylone and hinges made out of CRCA powder coated. 4mm thick glass
should be fixed with EPDM gaskets. Guard bars fabricated out of 10mm square bright
bars shall be fixed horizontally at 125mm C/C by rivetting to the external frame. The
above frames are fixed to the concrete / masonry walls by means of self expanding
screws.” with 4mm float glass with gaurd bars

7.24.1.d "Providing and fixing cold rolled prepainted steel windows of IS standards, made out of Sqm
0.6mm thick deep drawing quality galvanised on both sides 120gms/sq.mtr. Primer
coat upto 5 microns with thermosetting epoxy resin and finish painted with a polyester
based paint 20 microns thick. The size of profiles is approximately 46 x 52mm for
external frames, 46x46mm section for shutters, 46x70mm section for centre
mullion/transom and 18x31mm section is for fixing glasses. The section should be cut
to length joint mitred and assembling by means of corner brackets made out of cold
rolled cold annealed strips of 1.2mm thick duly galvanised and fixed with nickle plated
self taping screws.The shutters are provided with approved quality of fixtures like
handles made out of zamac alloy die cast and powder coated, receiver made out of
glass filled nylone and hinges made out of CRCA powder coated. 4mm thick glass
should be fixed with EPDM gaskets. Guard bars fabricated out of 10mm square bright
bars shall be fixed horizontally at 125mm C/C by rivetting to the external frame. The
above frames are fixed to the concrete / masonry walls by means of self expanding
screws.” with 4mm tinted glass with gaurd bars
7.25 Providing and fixing cold rolled prepainted steel partitions of IS standards, made out of Sqm
0.6mm of deep drawing quality galvanised on both sides 120gms/Sq.mtr. Primer
coated upto 5 microns with thermosetting epoxy resin and finish painted with a
polyester based paint 20 microns thick. The size of profiles is 46X52mm for external
frame, section for mullion or transom is of size 46x70mm and section for fixing
glass/board is of 18x31mm. The section should be cut to length joint mitred and
assembling by means of corner brackets made out of cold rolled cold annealed strips
of 1.2mm thick duly galvanised and fixed with nickel plated self taping screws. 5mm
thick glass should be fixed with EPDM gaskets. 10mm thick prelaminated particle
board shall be fixed with the help of the clipping bead. The above frames are fixed to
the concrete / masonry walls and floors by means of self expanding screws.

7.26 Supplying and fixing pressed steel door frames size 125x65 mm manufactured from Sqm
1.25mm thick carbon steel or imported steel strips with mitred joints of 900 for door
openings and shutters made out of seasoned Honne wood, styles of 30 mm, thick with
lock rail of 160 mm, width, top and side rails of 100 mm. width and bottom rails of 250
mm width and panel filling with 12mm thick particle board of exterior grade bonded
with phenol formal dehide resin and the shutter shall be rot proof, vermin proof, heat
resistant guaranteed against shrinkage, warpage and such other defects for a period
of 3 years. This shall be as per approved drawings, specification and direction
including cost of conveyance, manufacturing, painting with enamel paint 2 coats over
primer coat, cost of labour for all items of work, machinery, equipment and all other
incidental charges with all lead, lift, loading and unloading etc., complete. The Hollow
portion of the frame to be filled with cement concrete 1:2:4.

7.27 "Supplying and fixing pressed steel window frame of size 100 x 50mm manufactured Sqm
from 1.25 mm thick carbon steel or imported steel strips with neat mitred joints at
900degree for window openings and shall be suitable to fix M.S. grills as per design
and drawings using 12mm dia rods at 100mm Centre to Centre horizontally and two
members of M.S flats of 6mmx40mm size at 150mm apart, welded into a frame of
6mmx40mm size M.S. flats with 16mm size lugs, and 8 Nos. of 100mm size hinges, 4
Nos of Butt Stay pins and 4 Nos. Tower bolts and shutters half panelled and hallf
glazed with shutters made out of seasoned honne wood, styles of 30mm thick and
100mm width and rails of 30mm thick and 100mm width and using 4mm thick pin
headed glass and panel, filling with 12mm thick particle board of exterior grade
bonded with phenol formal dehide resin and the shutter shall be rot proof vermin proof,
heat resistant guaranteed against shrinkage, warp age and such other defects for a
period of 3 years.This shall be as per approved drawing, specification and direction
including cost of conveyance, manufacturing painting with 2 coats enamel paint over
one coat of primer, cost of labour for all items of work, machinery, equipment and all
other incidental charges with all lead, lift loading and unloading etc., complete. The
Hollow portion of the frame to be filled with cement concrete 1:2:4.”

7.28 Providing electric welding using carbon electrodes including cost of welding machine, cm
power charges, welding rods, and labour charges for welding etc., complete as per
specification.
7.29 Fabricating, supplying and erecting M.S. TubularTruss of span upto 10m. The bottom kgs
and top member is provided with 50x50x6mm double equal angles, welded back to
back and in between top and bottom line, in areas of mid section is provided with
50x50x6mm equal single angle for vertical and inclined members and at supporting
ends 40x40x5mm single angle is provided. All the members are welded together with
6mm gusset plate as per Drawing. The entire truss is anchored in RCC column by
using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and
shoe plate.The work includes cutting, straightening, placing in position of M.S angle
and wleding wherever necessary, and applying one coat of red oxide primer coat to all
themembers including cost of all materials, labour charges, and hire charges of
machineries for cutting, welding, grinding and erection equipments, with all lead and
lift, transportation, etc., complete as per specification.

7.30 Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The bottom & kgs
top member is provided with 50x50x6mm double equal angles, welded back to back
and in between top & bottom line, in areas of mid section is provided with 50x50x6mm
equal single angle for vertical and inclined members and at supporting ends
40x40x5mm single angle is provided. All the members are welded together with 6mm
gusset plate as per Drawing No.CBS/ SD/K-Mantap/9/MND/97. The entire truss is
anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with
10mm thick base plate and shoe plate.The work includes cutting, straightening,
placing in position of M.S angle and wleding wherever necessary, and applying one
coat of red oxide primer coat to all the members including cost of all materials, labour
charges, & hire charges of machineries for cutting, welding, grinding & erection
equipments, etc., complete as per specification

7.31 Fabricating, providing and erecting in poiston of M S Ornamental security Grill Gate kgs
without hot dip using 75 x 12mm M S Flat for alround frame work with verticals at the
centre and horizontal centere support M S Square of 20 x20 mm of different heights as
shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full height and
at 8cms C / C for bottom rods providg ornamental C I Designers at the botom and C I
arrows inthe midle and top. The entire frame work is to be fixed by means of
expansion bolts to the brick pillars with necesary drillling holes. the work includes
providng two coats of enamel painting over one coatr of red lead ready mix primer
coat etc complete cost of all labour, painting, erection charges using hoist pulleycranes
with all lead and lift, loading, transporting and unloading using hoist pulley cranes,
scaffolding charges and all other incidental charges required for successful completion
fo the work as per specification and drawings

7.32 Fabricating, providing and erecting in poiston of Hot dip galvanised M.S.Ornamental kgs
security Grill Gate using 75 x 12mm M S Flat for alround frame work with verticals at
the centre and horizontal centere support M S Square of 20 x20 mm of different
heights as shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full
height and at 8cms C / C for bottom rods providg ornamental C I Designers at the
botom and C I arrows inthe midle and top. The entire frame work is to be fixed by
means of expansion bolts to the brick pillars with necesary drillling holes. the work
includes providng two coats of enamel painting over one coat of red lead ready mix
primer coat etc complete cost of all labour, painting, erection charges using hoist
pulleycranes etc as per specification and drawings.
7.33 Fabricating, providing and erecting in poiston of M S Ornamental security Grill without kgs
hot dip using 75 x 12mm M S Flat for alround frame work with verticals at the centre
and horizontal centere support M S Square of 20 x20 mm of different heights as
shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full height and
at 8cms C / C for bottom rods providg ornamental C I Designers at thebotom and C I
arrows inthe midle and top. The entire frame work is to be fixed by means of
expansion bolts to the brick pillars with necesary drillling holes. the work includes
providng two coats of enamel painting over one coatr of red lead ready mix primer
coat etc complete cost of all labour, painting, erection charges using hoist pulleycranes
etc as per specification and drawings.

7.34 Fabricating, providing and erecting in poiston of Hot dip galvanised M S Ornamental kgs
security Grill using 75 x 12mm M S Flat for alround frame work with verticals at the
centre and horizontal centere support M S Square of 20 x20 mm of different heights as
shown in the drawing are to be fixed at 16 cms C/C for suqare bars of full height and
at 8cms C / C for bottom rods providg ornamental C I Designers at the botom and C I
arrows inthe midle and top. The entire frame work is to be fixed by means of
expansion bolts to the brick pillars with necesary drillling holes. the work includes
providng two coats of enamel painting over one coatr of red lead ready mix primer
coat etc complete cost of all labour, painting, erection charges using hoist pulleycranes
with all lead and lift, loading, transporting and unloading using hoist pulley cranes,
scaffolding charges and all other incidental charges required for successful completion
fo the work as per specification and drawings,

7.35 Providing and fixing M.S. Hand railing for Balcony with 50mm dia. M.S. hollow pipe of Sqm
14 gauge, welded to 20mmx20mm M.S. square rod placed vertically, spaced at
100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal
rods spaced at equal interval. These assembly is fixed to concrete by using expansion
bolts and welding the same to reinforcement bars and making good the surface. All the
joints and sections hould be cut to length, welded and grinded wherever necessary
etc., complete . The work includes cost of all materials, labour charges for all items of
work, hire charges for welding, cutting and grinding equipment, and electricity charges,
etc., complete as per specification and drawing.

7.36 Providing and fixing M.S.Grill over existing compound wall as per Chief Architect Sqm
drawing No. 12686, using 16mm x 16mm M.S.Square rod at 150mm c/c spacing and
6mm x 40mm M.S. flats at horizontal and 6mm x12mm M.S. flat for ornamental design
and providing shop edge design at the vertex of every vertical rods, including welding,
grinding wherever necessary. All the steel surface should be thoroughly cleaned free
of rust and painted with anti corrosive paint (shop paint) etc., complete. The work
includes cost of all materials, labour charges for all items of work, hire charges for
welding, cutting and grinding equipment, and electricity charges, etc., complete as per
specification.

7.37 Providing and fixing M.S. Gate as per Chief Architect Drawing, using 50mm x 50mm Sqm
14 guage M.S. hollow pipe frame work bent to ornamental shape as shown in the
drawing and 35mm x 6mm and 16 x 16mm Square rods for verticals alternatively
spaced at 4cms c/c in two halves and 40mmx6mm M.S. flats for horizontal member
and at the top cast iron spikes are provided at alternate vertical members asshown in
the drawing etc., complete. All the steel surface should be thoroughly cleaned free of
rust and painted with anti corrosive paint (shop paint) etc., complete. The work
includes cost of all materials, labour charges for all items of work, hire charges for
welding, cutting and grinding equipment, and electricity charges, with lead and lift,
loading and unloading charges, etc., complete as per specifiocation.
7.38 Providing and fixing Stainless steel staircase raling as per Chief Architect Drawing No. Sqm
11520/ HRSC with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow
50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular
intervals, and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to
vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by
using expansion bolts by drilling concrete etc., complete including cost of materials,
labour, HOM of machineries and electrical charges, etc., complete as per
specifications.

7.39 Providing and fixing 304 - grade stainless steel hand rails of 14-gauge pipes for Sqm
Ramps or Staircase are made out of stainless steel hallow pipes, using 50mm dia for
verticals @1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and
100mm dia MS base plates 10mm gauge for fixing of Vertical pipes 4 - Nos anchor
bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes are fixed with
vertical pipes another one are fixed with elbows and 25mm dia pipes are fixed
horizontally for 2-rows below top measure @ equal intervals including cutting, welding,
bending wherever necessary with suitable caps @ tops, bottoms & corners finishing
with mat / shining etc., complete including cost and conveyance of all materials, labour
for all items of work, HOM of equipment with all lead and lift, loading and unloading,
transportation charges and all other incidental charges etc., complete as per
specification and directions of the Engineer-in-charge of the work. Ramps or Staircase
for physically challenged.
Basic Rate
5,401.00

3,229.00

2,777.00

2,201.00

2,607.00

521.00

4,014.00
3,411.00

105.00

4,266.00

4,375.00
4,351.00

4,473.00

3,723.00
3,903.00

4,776.00

4,861.00
4,734.00

4,795.00
3,364.00

3,432.00
3,977.00

4,018.00
6,131.00

6,220.00

3,940.00
 4,400.00

6,655.00

10,535.00

8,380.00

2,500.00
2,600.00

2,000.00

4,400.00
4,500.00

5,250.00

5,350.00
2,500.00

3,210.00

3,550.00

3.00
121.00

135.00

138.00

157.00
 155.00

185.00

2,979.00

5,711.00

3,200.00
6,038.00

5,378.00
Item No. Description Unit
8.1 KSRB 8.1 : Providing and fixing in position stone slab roofing 10 to 12 cms thick laid to Sqm
line and level over wooden rafters or R.C.C. battens, pointing exposed joints with
cement mortar 1:4 including cost of materials, labour, curing complete as per
specifications. ( wooden rafters and R.C.C. battens to be paid seperately )
Specification No. KBS
8.2 KSRB 8.2 : Providing and fixing in position black cuddapah slab / Shahabad slab / Sqm
Thandur blue slab 4 cms thick for roofing laid to line and level over wooden rafters or
R.C.C. battens pointing exposed joints with cement mortar 1:4 including cost of
materials, labour, curing complete as per specifications. (wooden rafters and R.C.C.
battens to be paid seperately )
8.3 KSRB 8.3-1 : Providing and laying to required line and slope roofing with corrugated Sqm
asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and
nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and
trusses including cost of materials, labour, complete as per specifications.
Specification No. KBS 8.5
8.4 KSRB 8.5 : Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder cum
of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting,
including cost of materials, labour, curing complete as per specifications.

8.5 KSRB 8.6-1 : Providing and fixing on wall surface cast iron rain down water pipes M
75mm dia including filling the joints with spun yarn soaked in neat cement slurry 1:2
with necessary specials like shoes, bends and offsets fixed with iron clamps, wall
plugs, screws, including cost of materials, labour, complete as per specifications.

8.6 KSRB 8.3-2 : Providing and laying to required line and slope roofing with semi- Sqm
corrugated ( Trafford ) asbestos cement sheet 6mm. thick fixed with galvanised iron J
or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers, over the existing
purlins, rafters and trusses including cost of materials, labour, complete as per
specifications.
8.7 KSRB 8.3-3 Extra for A.C. sheet corrugated / semi-corrugated sheet roofing with Sqm
vertical sheeting to a pitch exceeding 60 degrees
8.8 KSRB 8.3-4 : Providing and fixing ridges, hips with asbestos cement sheet roofing with M
G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or
plain wings, adjustable ridges, including cost of materials, labour, complete as per
specifications.
8.9 KSRB 8.3-5 : Providing and fixing northlight adjustable ridges, hips with asbestos M
cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and
bitumen washers, serrated or plain wings, adjustable ridges, including cost of
materials, labour, complete as per specifications.
8.10 KSRB 8.4-1 : Providing and fixing Mangalore tile roofing using first class tiles with Sqm
necessary special tiles for ridges and hips, teak wood reepers of size 50x25mm and
pointed with cement mortar 1:4 over the existing rafters including cost of materials,
labour, curing complete as per specifications. Specification No. KBS 8.17

8.11 KSRB 8.4-2 :Providing and fixing Mangalore tile roofing using first class tiles with Sqm
necessary special tiles for ridges and hips,nandi wood reepers of size 50x25mm and
pointed with cement mortar 1:4 over the existing rafters including cost of materials,
labour, curing complete as per specifications. Specification No. KBS 8.17

8.12 KSRB 8.4-3 : Providing and fixing Mangalore tile roofing using first class tiles with Sqm
necessary special tiles for ridges and hips,jungle wood reepers of size 50x25mm and
pointed with cement mortar 1:4 over the existing rafters including cost of materials,
labour, curing complete as per specifications. Specification No. KBS 8.17
8.14 KSRB 8.6-3 : Providing and fixing on wall surface asbestos cement rain down water M
pipes 75mm dia including filling the joints with spun yarn soaked in neat cement slurry
1:2 with necessary specials like shoes, bends and offsets fixed with iron clamps, wall
plugs, screws, including cost of materials, labour, curing complete as per
specifications. Specification No. KBS 8.27, 8.28
8.15 KSRB 8.6-4 : Providing and fixing on wall surface asbestos cement rain down water M
pipes 100 mm dia including filling the joints with spun yarn soaked in neat cement
slurry 1:2 with necessary specials like shoes, bends and offsets fixed with iron clamps,
wall plugs, screws, including cost of materials, labour, curing complete as per
specifications. Specification No. KBS 8.27, 8.28
8.16 KSRB 8.6-5 : Providing and fixing on wall surface 2.5 kg / sq.cm H.D.P.E. rain down M
water pipes 90 mm outer dia approved make and brand with necessary specials like
shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of
materials, labour, curing complete as per specifications.
8.17 KSRB 8.6-6 : Providing and fixing on wall surface 2.5kg / sq.cm H.D.P.E. rain down M
water pipes 110mm outer dia approved make and brand with necessary specials like
shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of
materials, labour, curing complete as per specifications.
8.18 KSRB 8.6-7 : Providing and fixing on wall surface 4.0 kg / sq.cm H.D.P.E. rain down M
water pipes 90 mm outer dia. approved make and brand with necessary specials like
shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of
materials, labour, complete as per specifications.
8.19 KSRB 8.6-8 : Providing and fixing on wall surface. 40 kg / sq.cm H.D.P.E. rain down M
water pipes 110mm outer dia. approved make and brand with necessary specials like
shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of
materials, labour, complete as per specifications.
8.20 KSRB 8.7-1 :Providing and fixing in position 10mm thick plaster of paris ( Gypsum Sqm
anhydrous ) for ceiling flat surface upto a height of 5 m above floor level over
aluminium 25mm / 6mm with 10mm gap in between and reinforced with rabbit wire
mesh fixed to metal frames including cost of materials, labour, curing complete as per
specifications.
8.21 KSRB 8.7-2 : Providing and fixing in position 10mm thick plaster of paris ( Gypsum Sqm
anhydrous ) for ceiling curved surface upto a height of 5 m above floor level
overaluminium strips 25mm / 6mm with 10mm gap in between and reinforced with
rabbit wire mesh fixed to meatal frames including cost of materials, labour, curing
complete as per specifications.
8.22 KSRB 8.7-3 : Extra over item No. 8.7-1 and 8.7-2 for any sunk or raised moulded Sqm
design plaster of paris ( Gypsum anhydrous ) ceiling
8.23 KSRB 8.7-4 : Extra over item No. 8.7-1 and 8.7-2 for providing plaster of paris Sqm/M
(Gypsum anhydrous ) ceiling above 5 m height from floor level
8.24 KSRB 8.7-5 : Providing and fixing in position 12mm thick plaster of paris ( Gypsum Sqm
anhydrous ) for ceiling flat surface with ceiling tiles upto a height of 5 m above floor
level over wooden frames and rendered smooth with plaster of paris ( frame work to
be measured and paid for seperately ) including cost of materials, labour, curing
complete as per specifications.
8.25 KSRB 8.7-6 : Extra over item No. 8.7-5 for providing plaster of paris (Gypsum Sqm
anhydrous ) ceiling tiles above 5 m height from floor level
8.26 Providing top layer with 12mm thick silica latex plaster with smooth finishing on top Sqm
surface.
8.27 Providing and fixing 6mm clear I opal white I solar I bronze I blue I green tinted multi Sqm
wall poly carbonate sheet for tubular structure. The work including cost of all materials,
labour charges and hire charges of machineries for cutting, welding, grinding and
erection equipments, with all lead and lifts, transportation, loading and unloading and
all other incidental charges etc. complete as per specification and directions of the
engineer in charge of the work.
8.28 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight Sqm
calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true
horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel
sections (galvanizing @ 120 grams per sqm including both side) consisting of main 'T'
runner suitably spaced at joints to get required length and of size 24 x 38 mm made
from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross 'T'
of size 24 x 28 mm made out of 0.33 mm (minimum) sheet, 1200 mm long spaced
between main 'T' at 600 mm centre to centre to form a grid of 1200 x 600 mm and
secondary cross 'T' of length 600 mm and size 24 x 28 mm made of 0.33 mm thick
(minimum) sheet to be inter locked at middle of the 1200 x 600 mm panel to from grid
of size 600 x 600 mm, resting on periphery walls I partitions on a Perimeter wall angle
pre-coated steel of size (24 x 24 x 3000 mm made of 040 mm thick (minimum) sheet
with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall
screwes at 230 mm intervals and laying 15 mm thick densifed edges calcium silicate
ceiling tiles of approved texture in the grid, including cutting I making opening for
services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever
required. Main 'T' runners to be suspended from ceiling using G.l. slotted cleats of size
25 x 35 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4
mm G. I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.80mm
spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all
T sections shall be pre-painted with polyster baked paint for all heights, as per
specifications, drawings and as directed by Engineer-in-charge.

8.29 Providing and fixing of pre pigmented extruded orange cement roof tiles of size Sqm
420mm x 330mm with necessary specials such as Ridges, Barges and Nails etc.
including cast of providing PVC (6.00kgs/sq em) gutters of min 6" radius and down
water pipes of 4" dia as per the roof design on EXISTING MSNVOODEN ROOF or
TRUSS. Including cost of materials, scaffoldings, labour etc., compelte as per
specifications.

8.30 Providing and fixing of pre pigmented extruded orange cement roof tiles of size Sqm
420mm x 330mm with necessary specials such as Ridges, Barges and Nails etc,
including cost of providing PVC (6.00kgs/ sqcm) gutters of min 6" radius and down
water pipes of 4" dia as per roof design on EXISTING CONCRETE SLOPING ROOF
SLAB. Including cost of mortar band, all materials labour as per specifications.

8.31.1 Providing and laying non-asbestos high impact polypropylene reinforced corrugated Sqm
cement roofing sheet reinforced with a blend of strong factory made fibers as per IS
14871 and ISO 9933 1995 (E) roofing upto any pitch and fixing with polymer coated J
or L hooks, bolts and nuts 8mm dia,G.I plain and bitumen washers or with self drilling
fastener and EPDM washers etc. complete but excluding the cost of purlins, rafters
and trusses. Including cutting to size and shape of corrugated sheets wherever
required.and cost of materials, labour, complete as per specifications. with Natural
Grey colour

8.31.2 Providing and laying non-asbestos high impact polypropylene reinforced corrugated Sqm
cement roofing sheet reinforced with a blend of strong factory made fibers as per IS
14871 and ISO 9933 1995 (E) roofing upto any pitch and fixing with polymer coated J
or L hooks, bolts and nuts 8mm dia,G.I plain and bitumen washers or with self drilling
fastener and EPDM washers etc. complete but excluding the cost of purlins, rafters
and trusses. Including cutting to size and shape of corrugated sheets wherever
required.and cost of materials, labour, complete as per specifications. with Other
colours
Basic Rate
1,158.00

636.00

346.00

2,006.00

989.00

374.00

15.00

300.00

211.00

984.00

742.00

662.00
 383.00

418.00

364.00

431.00

390.00

511.00

1,327.00

1,479.00

596.00

161.00

1,167.00

72.00

345.00

3,126.00
1,504.00

721.00

686.00

543.00

590.00
Item No. Description Unit
9.1 KSRB 9-1 :Labour for providing Teak wood wrought and putup for purlins, common cum
rafters and similar work including cost of labour, HOM of machineries complete as per
specifications. Specification No. KBS 9.4
9.2 KSRB 9-2.1 :Providing Honne wood wrought and putup for purlins, common rafters cum
and similar work including cost of materials, labour, HOM of machineries complete as
per specifications. Specification No. KBS 9.27
9.3 KSRB 9-2.2 :Providing Mathi / Nandi wood wrought and putup for purlins, common cum
rafters and similar work including cost of materials, labour, HOM of machineries
complete as per specifications. Specification No. KBS 9.27
9.4 KSRB 9-2.3 :Providing Sal wood wrought and putup for purlins, common rafters and cum
similar work including cost of materials, labour, HOM of machineries complete as per
specifications. Specification No. KBS 9.27
9.5 KSRB 9-2.4 :Providing Jungle wood such as Nerale, Neem wrought and putup for cum
purlins, common rafters and similar work including cost of materials, labour, HOM of
machineries complete as per specifications. Specification No. KBS 9.27
9.10 KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory windows, cum
ventilators and other frames, wrought, framed or assembled including making plaster
groves ( excluding cost of cement concrete and side clamps ), but including cost of
materials, labour, HOM of machineries complete as per specifications. Specification
No. KBS 9.33
9.11 KSRB 9.4-2 : Providing Honne wood frames of doors, windows, clerestory windows, cum
ventilators and other frames, wrought, framed or assembled including making plaster
groves ( excluding cost of cement concrete and side clamps ), but including cost of
materials, labour, HOM of machineries complete as per specifications. Specification
No. KBS 9.33
9.12 KSRB 9.4-3 : Providing Mathi / Nandi wood frames of doors, windows, clerestory cum
windows, ventilators and other frames, wrought, framed or assembled including
making plaster groves ( excluding cost of cement concrete and side clamps ), but
including cost of materials, labour, HOM of machineries complete as per
specifications. Specification No. KBS 9.33
9.13 KSRB 9.4-4 : Providing WHITE Sal wood frames of doors, windows, clerestory cum
windows, ventilators and other frames, wrought, framed or assembled including
making plaster groves ( excluding cost of cement concrete and side clamps ), but
including cost of materials, labour, HOM of machineries complete as per
specifications. Specification No. KBS 9.33
9.13.1 KSRB 9.4-5 : Providing RED Sal wood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including making plaster
groves ( excluding cost of cement concrete and side clamps ), but including cost of
materials, labour, HOM of machineries complete as per specifications. Specification
No. KBS 9.33
9.14 KSRB 9.5-1 : Providing and fixing in position fully panelled Teak wood shutters for Sqm
doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures) Specification No. KBS 9.34
9.15 KSRB 9.5-2 : Providing and fixing in position fully panelled Honne wood shutters for Sqm
doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures) Specification No. KBS 9.34
9.16 KSRB 9.5-3 : Providing and fixing in position fully panelled Mathi/Nandi wood shutters Sqm
for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top
rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures) Specification No. KBS 9.34
9.17 KSRB 9-6.1 : Providing and fixing in position fully panelled Teak wood shutters for Sqm
doors, styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures) Specification No. KBS 9.34
9.18 KSRB 9-6.2 : Providing and fixing in position fully panelled Honne wood shutters for Sqm
doors, styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures) Specification No. KBS 9.34
9.19 KSRB 9-6.3 : Providing and fixing in position fully panelled Mathi/ Nandi wood shutters Sqm
for doors, styles and rails of 35mm. thick with bottom and lock rails 180mm wide top
rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. ( excluding cost
of fixtures) Specification No. KBS 9.34
9.20 KSRB 9-7.1 : Providing and fixing in position fully panelled Teak wood shutters for Sqm
doors, styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. (excluding cost
of fixtures) Specification No. KBS 9.34
9.21 KSRB 9-7.2 : Providing and fixing in position fully panelled Honne wood shutters for Sqm
doors, styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. (excluding cost
of fixtures) Specification No. KBS 9.34
9.22 KSRB 9-7.3 :Providing and fixing in position fully panelled Mathi/ Nandi wood shutters Sqm
for doors, styles and rails of 30mm. thick with bottom and lock rails 180mm wide top
rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. (excluding cost
of fixtures) Specification No. KBS 9.34
9.23 KSRB 9-8.1 : Providing and fixing in position fully panelled Teak wood shutters for Sqm
doors, styles and rails of 25mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. (excluding cost
of fixtures) Specification No. KBS 9.34
9.24 KSRB 9-8.2 : Providing and fixing in position fully panelled Honne wood shutters for Sqm
doors, styles and rails of 25mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. (excluding cost
of fixtures) Specification No. KBS 9.34
9.25 KSRB 9-8.3 : Providing and fixing in position fully panelled Mathi/ Nandi wood shutters Sqm
for doors, styles and rails of 25mm. thick with bottom and lock rails 180mm wide top
rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of
materials, labour, HOM of machineries complete as per specifications. (excluding cost
of fixtures) Specification No. KBS 9.34
9.26 KSRB 9-9.1: Providing and fixing in position Teak wood half panelled and half glazed Sqm
shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm
wide top rail and styles 100mm wide as per drawing and panels of 25mm thick, 4mm
thick plain glass, fixed with beading 15mm wide and thickness to finish with the
shutters surface including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42
9.27 KSRB 9-9.2: Providing and fixing in position Honne wood half panelled and half glazed Sqm
shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm
wide top rail and styles 100mm wide as per drawing and panels of 25mm thick, 4mm
thick plain glass, fixed with beading 15mm wide and thickness to finish with the
shutters surface including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.28 KSRB 9-10.1 : Providing and fixing in position Teak wood half panelled and half glazed Sqm
shutters for doors, styles and rails of 35mm. thick with bottom and lock rails 180mm
wide top rail and styles 100mm wide as per drawing and panels of 25mm thick, 4mm
thick plain glass, fixed with beading 15mm wide and thickness to finish with the
shutters surface including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures )

9.29 KSRB 9-10.2 :Providing and fixing in position Honne wood half panelled and half Sqm
glazed shutters for doors, styles and rails of 35mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm
thick, 4mm thick plain glass, fixed with beading 15mm wide and thickness to finish with
the shutters surface including cost of materials, labour, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.30 KSRB 9-11.1 : Providing and fixing in position Teak wood half panelled and half glazed Sqm
shutters for doors, styles and rails of 30mm. thick with bottom and lock rails 180mm
wide top rail and styles 100mm wide as per drawing and panels of 25mm thick, 4mm
thick plain glass, fixed with beading 15mm wide and thickness to finish with the
shutters surface including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.31 KSRB 9-11.2 : Providing and fixing in position Honne wood half panelled and half Sqm
glazed shutters for doors, styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm
thick, 4mm thick plain glass, fixed with beading 15mm wide and thickness to finish with
the shutters surface including cost of materials, labour, HOM of machineries complete
as per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.32 KSRB 9-12.1 : Providing and fixing in position Teak wood half panelled and half glazed Sqm
shutters for doors, styles and rails of 30mm. thick with bottom and lock rails 180mm
wide top rail and styles 100mm wide as per drawing and panels of 20mm thick, 4mm.
thick plain glass, fixed with beading 15mm wide and thickness to finish with the
shutters surface including cost of materials, labour, HOM of machineries complete as
per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.33 KSRB 9-12.2 : Providing and fixing in position Honne wood half panelled and half Sqm
glazed shutters for doors, styles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and styles 100mm wide as per drawing and panels of 20mm
thick, 4mm. thick plain glass, fixed with beading 15mm wide and thickness to finish
with the shutters surface including cost of materials, labour, HOM of machineries
complete as per specifications. ( excluding cost of fixtures ) Specification No. KBS
9.34, 9.42

9.34 KSRB 9-13-1: Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Melamine impregnated prelamination particle board of approved colour on both sides
including cost of materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.4
9.35 KSRB 9-13-2 : roviding and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Melamine impregnated prelamination particle board of approved colour on both sides
including cost of materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.4 on one
side

9.36 KSRB 9-13-3 : Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
plain particle board including cost of materials, labour, HOM of machineries complete
as per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.3

9.37 KSRB 9-14-1: Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Melamine impregnated prelamination particle board of approved colour on both sides
including cost of materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.4

9.38 KSRB 9-14-2 : Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Melamine impregnated prelamination particle board of approved colour on one side
including cost of materials, labour, HOM of machineries complete as per
specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.4 one
side

9.39 KSRB 9-14-3 : Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
plain particle board including cost of materials, labour, HOM of machineries complete
as per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.3

9.40 KSRB 9-15-1: Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Melamine impregnated prelamination particle board of approved colour on both sides
including cost of materials, labour, HOM of machineries complete as per
specifications. (excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.3

9.41 KSRB 9-15-2 : Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Melamine impregnated prelamination particle board of approved colour on one side
including cost of materials, labour, HOM of machineries complete as per
specifications. (excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.3 one side

9.42 KSRB 9-15-3 : Providing and fixing in position shutters for doors made out of Honne Sqm
wood styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail
and styles 100mm wide as per drawing and panels of 18mm thick of exterior grade
Plain particle board including cost of materials, labour, HOM of machineries complete
as per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.3
9.43 KSRB 9-16.1 : Providing and fixing in position Teak wood fully panelled shutters for Sqm
windows with styles and rails of 35mm. thick, 75mm wide in two halves with panels of
25mm thick including cost of materials, labour charges, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34

9.44 KSRB 9-16.2 : Providing and fixing in position Honne wood fully panelled shutters for Sqm
windows with styles and rails of 35mm. thick, 75mm wide in two halves with panels of
25mm thick including cost of materials, labour charges, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34

9.45 KSRB 9-16.3 : Providing and fixing in position Mathi/ Nandi wood fully panelled Sqm
shutters for windows with styles and rails of 35mm. thick, 75mm wide in two halves
with panels of 25mm thick including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures ) Specification
No. KBS 9.34
9.46 KSRB 9-16.4 : Providing and fixing in position fully panelled shutters for windows with Sqm
Honne wood styles and rails of 35mm. thick, 75mm wide in two halves with panels
provided with NUWUD ( MDF ) of 25mm thick including cost of materials, labour
charges, HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.3
9.47 KSRB 9-17.1 : Providing and fixing in position Teak wood fully panelled shutters for Sqm
windows with styles and rails of 30mm. thick, 75mm wide in two halves with panels of
20mm thick including cost of materials, labour charges, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34

9.48 KSRB 9-17.2 : Providing and fixing in position Honne wood fully panelled shutters for Sqm
windows with styles and rails of 30mm. thick, 75mm wide in two halves with panels of
20mm thick including cost of materials, labour charges, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34

9.49 KSRB 9-17.3 : Providing and fixing in positionMathi/ Nandi wood fully panelled Sqm
shutters for windows with styles and rails of 30mm. thick, 75mm wide in two halves
with panels of 20mm thick including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures ) Specification
No. KBS 9.34
9.50 KSRB 9-17.4 : Providing and fixing in position fully panelled shutters for windows with Sqm
Honne wood styles and rails of 30mm. thick, 75mm wide in two halves with panels
provided with NUWUD ( MDF ) of 18mm thick including cost of materials, labour
charges, HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.3
9.51 KSRB 9-18.1 : Providing and fixing in position Teak wood fully panelled shutters for Sqm
windows with styles and rails of 25mm. thick, 75mm wide in two halves with panels of
20mm thick including cost of materials, labour charges, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34

9.52 KSRB 9-18.2 : Providing and fixing in position Honne wood fully panelled shutters for Sqm
windows with styles and rails of 25mm. thick, 75mm wide in two halves with panels of
20mm thick including cost of materials, labour charges, HOM of machineries complete
as per specifications. (excluding cost of fixtures ) Specification No. KBS 9.34

9.53 KSRB 9-18.3 : Providing and fixing in position Mathi/ Nandi wood fully panelled Sqm
shutters for windows with styles and rails of 25mm. thick, 75mm wide in two halves
with panels of 20mm thick including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures ) Specification
No. KBS 9.34
9.54 KSRB 9-18.4 : Providing and fixing in position fully panelled shutters for windows with Sqm
Honne wood styles and rails of 25mm. thick, 75mm wide in two halves with panels
provided with NUWUD ( MDF ) of 18mm thick including cost of materials, labour
charges, HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.3
9.55 KSRB 9-18.5 : Providing and fixing in position fully panelled shutters for windows with Sqm
Honne wood styles and rails of 25mm. thick, 75mm wide in two halves with panels
provided with NUWUD ( MDF ) of 12mm thick including cost of materials, labour
charges, HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.26.3
9.56 KSRB 9-19.1 : Providing and fixing in position Teak wood half panelled shutters at Sqm
bottom and half glazed at top for window shutters with styles and rails of 35mm. thick,
75mm wide in two halves with panels of 25mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures) Specification
No. Providing and fixing in position Teak wood half panelled shutters at bottom and
half glazed at top for window shutters with styles and rails of 35mm. thick, 75mm wide
in two halves with panels of 25mm thick, 3mm thick reeded glass for top panels fixed
with wooden beading including cost of materials, labour charges, HOM of machineries
complete as per specifications. ( excluding cost of fixtures) Specification No. KBS
9.34, 9.42

9.57 KSRB 9-19.2 :Providing and fixing in position Honne wood half panelled shutters at Sqm
bottom and half glazed at top for window shutters with styles and rails of 35mm. thick,
75mm wide in two halves with panels of 25mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures) Specification
No. Providing and fixing in position Teak wood half panelled shutters at bottom and
half glazed at top for window shutters with styles and rails of 35mm. thick, 75mm wide
in two halves with panels of 25mm thick, 3mm thick reeded glass for top panels fixed
with wooden beading including cost of materials, labour charges, HOM of machineries
complete as per specifications. ( excluding cost of fixtures) Specification No. KBS
9.34, 9.42

9.58 KSRB 9-19.3 :Providing and fixing in position Mathi/ Nandi wood half panelled shutters Sqm
at bottom and half glazed at top for window shutters with styles and rails of 35mm.
thick, 75mm wide in two halves with panels of 25mm thick, 3mm thick reeded glass for
top panels fixed with wooden beading including cost of materials, labour charges,
HOM of machineries complete as per specifications. ( excluding cost of fixtures)
Specification No. Providing and fixing in position Teak wood half panelled shutters at
bottom and half glazed at top for window shutters with styles and rails of 35mm. thick,
75mm wide in two halves with panels of 25mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. ( excluding cost of fixtures) Specification
No. KBS 9.34, 9.42

9.59 KSRB 9-19.4 :Providing and fixing in position windows half paneled shutters at bottom Sqm
and half glazed at top for window shutters with Honne wood styles and rails of 35mm.
thick, 75mm wide in two halves with panels filled with NUWUD ( MDF ) of 18mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including cost of
materials, labour charges, HOM of machineries complete as per specifications.
( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42, 9.26.3

9.60 KSRB 9-20.1 : Providing and fixing in position Teak wood half panelled shutters at Sqm
bottom and half glazed at top for window shutters with styles and rails of 30mm. thick,
75mm wide in two halves with panels of 20mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures) Specification
No. KBS 9.34, 9.42
9.61 KSRB 9-20.2 : Providing and fixing in position Honne wood half panelled shutters at Sqm
bottom and half glazed at top for window shutters with styles and rails of 30mm. thick,
75mm wide in two halves with panels of 20mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures) Specification
No. KBS 9.34, 9.42

9.62 KSRB 9-20.3 : Providing and fixing in position Mathi/ Nandi wood half panelled Sqm
shutters at bottom and half glazed at top for window shutters with styles and rails of
30mm. thick, 75mm wide in two halves with panels of 20mm thick, 3mm thick reeded
glass for top panels fixed with wooden beading including cost of materials, labour
charges, HOM of machineries complete as per specifications. (excluding cost of
fixtures) Specification No. KBS 9.34, 9.42

9.63 KSRB 9-20.4 : Providing and fixing in position windows half paneled shutters at bottom Sqm
and half glazed at top for window shutters with Honne wood styles and rails of 30mm.
thick, 75mm wide in two halves with panels filled with NUWUD (MDF ) of 18mm thick,
3mm thick reeded glass for top panels fixed with woodenbeading including cost of
materials, labour charges, HOM of machineries completeas per specifications.
( excluding cost of fixtures ) Specification No. KBS 9.34,9.42, 9.26.3

9.64 KSRB 9-21.1 : Providing and fixing in position half panelled shutters at bottomand half Sqm
glazed at top for window shutters with Teak wood styles and rails of25mm. thick,
75mm wide in two halves with panels of 20mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures) Specification
No. KBS 9.34, 9.42

9.65 KSRB 9-21.2 : Providing and fixing in position half panelled shutters at bottomand half Sqm
glazed at top for window shutters with Honne wood styles and rails of25mm. thick,
75mm wide in two halves with panels of 20mm thick, 3mm thick reeded glass for top
panels fixed with wooden beading including cost of materials, labour charges, HOM of
machineries complete as per specifications. (excluding cost of fixtures) Specification
No. KBS 9.34, 9.42

9.66 KSRB 9-21.3 : Providing and fixing in position half panelled shutters at bottomand half Sqm
glazed at top for window shutters with Mathi/ Nandi wood styles and rails of25mm.
thick, 75mm wide in two halves with panels of 20mm thick, 3mm thick reeded glass for
top panels fixed with wooden beading including cost of materials, labour charges,
HOM of machineries complete as per specifications. (excluding cost of fixtures)
Specification No. KBS 9.34, 9.42

9.67 KSRB 9-21.4 : Providing and fixing in position windows half paneled shutters at bottom Sqm
and half glazed at top for window shutters with Honne wood styles and rails of 25mm.
thick, 75mm wide in two halves with panels filled with NUWUD ( MDF ) of 18mm thick,
3mm thick reeded glass for top panels fixed with wooden beading including cost of
materials, labour charges, HOM of machineries complete as per specifications.
( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42, 9.26.3

9.68 KSRB 9-22.1 : Providing and fixing in position fully glazed for windows shutters with Sqm
Teak wood styles and rails of 35mm. thick 75mm wide in single shutters with 4mm
thick plain glass fixed with wooden beading including cost of materials, labour
charges, HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34, 9.42
9.69 KSRB 9-22.2 : Providing and fixing in position fully glazed for windows shutters with Sqm
Honne wood styles and rails of 35mm. thick 75mm wide in single shutters with 4mm
thick plain glass fixed with wooden beading including cost of materials, labour
charges, HOM of machineries complete as per specifications. (excluding cost of
fixtures ) Specification No. KBS 9.34, 9.42
9.70 KSRB 9-23.1 : Providing and fixing in position fully glazed for windows shutters with Sqm
Teak wood styles and rails of 30mm. thick, 75mm wide in single shutters with 4mm
thick plain glass fixed with wooden beading including cost of materials, labour
charges, HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.42
9.71 KSRB 9-23.2 :Providing and fixing in position fully glazed for windows shutters with Sqm
Honne wood styles and rails of 30mm. thick, 75mm wide in single shutters with 4mm
thick plain glass fixed with wooden beading including cost of materials, labour
charges, HOM of machineries complete as per specifications. ( excluding cost of
fixtures ) Specification No. KBS 9.34, 9.42
9.72 KSRB 9-24.1 : Providing and fixing in position fully glazed for windows shutters with Sqm
Teak wood styles and rails of 25mm. thick, 75mm wide in single shutters with 4mm
thick plain glass fixed with wooden beading including cost of materials,labour charges,
HOM of machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
9.73 KSRB 9-24.2 : Providing and fixing in position fully glazed for windows shutters with Sqm
Honne wood styles and rails of 25mm. thick, 75mm wide in single shutters with 4mm
thick plain glass fixed with wooden beading including cost of materials,labour charges,
HOM of machineries complete as per specifications. ( excluding cost of fixtures )
Specification No. KBS 9.34, 9.42
9.74 KSRB 9-25.1 :Providing and fixing in position fully glazed shutters for ventilators side Sqm
hung or central pivoted with Teak wood styles and rails of 30mm. thick, 50mm wide
and central divider of 30mm. wide, 3mm thick reeded glass fixed with wooden beading
of size 10mm wide flushed to the thickness of the frame including cost of materials,
labour charges, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42

9.75 KSRB 9-25.2 :Providing and fixing in position fully glazed shutters for ventilators side Sqm
hung or central pivoted with Honne wood styles and rails of 30mm. thick, 50mm wide
and central divider of 30mm. wide, 3mm thick reeded glass fixed with wooden beading
of size 10mm wide flushed to the thickness of the frame including cost of materials,
labour charges, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42

9.76 KSRB 9-25.3 : Providing and fixing in position fully glazed shutters for ventilators side Sqm
hung or central pivoted with Mathi/ Nandi wood styles and rails of 30mm. thick, 50mm
wide and central divider of 30mm. wide, 3mm thick reeded glass fixed with wooden
beading of size 10mm wide flushed to the thickness of the frame including cost of
materials, labour charges, HOM of machineries complete as per specifications.
( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.77 KSRB 9-26.1 : Providing and fixing in position fully glazed shutters for ventilators side Sqm
hung or central pivoted with Teak wood styles and rails of 25mm. thick, 50mm wide
and central divider of 25mm. wide, 3mm thick reeded glass fixed with wooden beading
of size 10mm wide flushed to the thickness of the frame including cost of materials,
labour charges, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42

9.78 KSRB 9-26.2 : Providing and fixing in position fully glazed shutters for ventilators side Sqm
hung or central pivoted with Honne wood styles and rails of 25mm. thick, 50mm wide
and central divider of 25mm. wide, 3mm thick reeded glass fixed with wooden beading
of size 10mm wide flushed to the thickness of the frame including cost of materials,
labour charges, HOM of machineries complete as per specifications. ( excluding cost
of fixtures ) Specification No. KBS 9.34, 9.42
9.79 KSRB 9-26.3 : Providing and fixing in position fully glazed shutters for ventilators side Sqm
hung or central pivoted with Mathi/ Nandi wood styles and rails of 25mm. thick, 50mm
wide and central divider of 25mm. wide, 3mm thick reeded glass fixed with wooden
beading of size 10mm wide flushed to the thickness of the frame including cost of
materials, labour charges, HOM of machineries complete as per specifications.
( excluding cost of fixtures ) Specification No. KBS 9.34, 9.42

9.80 KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame Nos
in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement
concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to
sides of frame, making good the damages to walls and floor as required and disposal
of the debries with lead upto 50 m. including cost of materials, labour charges,
complete as per specifications.

9.81 KSRB 9-27.2 : Fixing of window frame in an existing opening including embeeding Nos
frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in
cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal
tar to sides of frame, making good the damages to walls and floor as required and
disposal of the debries with lead upto 50 m. including cost of materials, labour
charges, complete as per specifications.

9.82 KSRB 9-27.3 : Fixing of ventilator frame in an existing opening including embeeding Nos
frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in
cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal
tar to sides of frame, making good the damages to walls and floor as required and
disposal of the debries with lead upto 50 m. including cost of materials, labour
charges, complete as per specifications.

9.83 SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made Sqm
rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size
19x19mm fro styles and 15x15mm for top & bottom rails, covered with heat moulded
PVC channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick &
75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick
20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick
PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC
sheet beading on either side & joined together with solvent cement adhesive etc.,
Complete as per manufacturers specification & direction of Engineer-in-charge fixed to
frames with 3 nos of 75 m.m Aluminium hinges.

9.84 SOLID PVC DOOR FRAME Providing & fixing factory made PVC Door frame of size Sqm
50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm
M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square
tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of
65/80mm size complete as per manufacturers specification & direction of Engineer-in-
charge.

9.85.1 SOLID PANEL PRELAM PVC DOOR SHUTTER Providing & fixing 30mm thick factory Sqm
made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19
gauge for styles and 15x15mm for top & bottom rails, covered with heat moulded
Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles &
5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail
on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail &
bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the
M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side &
joined together with solvent cement adhesive etc., Complete as per manufacturers
specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm.
Aluminium hinges. with both side prelam
9.85.2 SOLID PANEL PRELAM PVC DOOR SHUTTER Providing & fixing 30mm thick factory Sqm
made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19
gauge for styles and 15x15mm for top & bottom rails, covered with heat moulded
Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles &
5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail
on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail &
bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the
M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side &
joined together with solvent cement adhesive etc., Complete as per manufacturers
specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm.
Aluminium hinges. with one side prelam

9.86 PVC DOOR SHUTTER (Nandi or Equivalent) Supply and fixing of door shuttersmade Sqm
of rigid PVC extruded hollow section (Nandi or equivalent) o f 20mm x 200mm with the
wall thickness of 1.0mm + /0.1mm equally divided into 4nos with tongue and groove
locking arrangements. The shutter frame is made of 58x24 mm with the wall thickness
of 1.5mm+/ -0.15mm section metricut and joined at 4 corners with 125mmx225mm
plastic brackets. The shutter shall be horizontally reinforced with 2nos of 8mm PVC
rods. Teak wood battons shall be reinforced inside the door shutter during the
fabrication of the door shutter at those points wherever the hardware is fixed on to the
door shutter.

9.87 Supply and fixing of door shutters made of rigid PVC extruded hollow section (Nandi Sqm
or equivalent) of 20mmx200mm with the wall thickness of 1.0mm+/-0.1mm equally
divided into 4nos with tongue an groove locking arrangements. The shutter frame is
made of 30mm x 79mm with the wall thickness of 1.5mm+/-0.15mm section metric cut
and joined at 4 corners with 125mmx225mm plastic brackets. The shutter shall be
horizontally reinforced with 2nos of 8mm PVC rods. Teak wood battons shall be
reinforced inside the door shutter during the fabrication of the door shutter at those
points wherever the hardware is fixed on to the door shutter.

9.88 Supply and fixing of door frame made of hollow extruded PVC Section (Nandi or M
Equivalent) having dimension of 40x57mm with the wall thickness of 2mm+/-0.2mm
duly reinforced with seasoned wood plank at the hinges side. The door frame top
2corners shall be metric cut/ welded.
9.89 Supply and fixing of door frame made of hollow extruded PVC Section (Nandi or M
Equivalent) having dimension of 40x46mm with the wall thickness of 2mm+/-0.2mm
duly reinforced with seasoned wood plank at the hinges side. The door frame top 2
corners shall be metric cut/ weilded .
9.90.1 Providing and fixing factory made splendoor of solid core single leaf rigid composite Sqm
polymer laminated sal wood, door shutter of required thickness, manufactured out of
solid core door conforming to IS 2202 (Part-1) 1991, laminated with 0.8 mm thick
polymer, termite, water resistant and fire retardant with superior gluing based on
vacuum lamination technology and with various pre moulded design on both faces
conforming to IS 6307-1985, using adhesive conforming to IS 4835-1979 and door
shuters tested in conformation to IS 4020-1994. The finish of shutters will be
TEADK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs
WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive of supply
of shutters to respective work spot. with door shutter 30mm thick
9.90.2 Providing and fixing factory made splendoor of solid core single leaf rigid composite Sqm
polymer laminated sal wood, door shutter of required thickness, manufactured out of
solid core door conforming to IS 2202 (Part-1) 1991, laminated with 0.8 mm thick
polymer, termite, water resistant and fire retardant with superior gluing based on
vacuum lamination technology and with various pre moulded design on both faces
conforming to IS 6307-1985, using adhesive conforming to IS 4835-1979 and door
shuters tested in conformation to IS 4020-1994. The finish of shutters will be
TEADK/OAK/CEDAR/ROSE WOOD/ WALNUT, plain colurs
WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive of supply
of shutters to respective work spot. with door shutter 35mm thick

9.91 Providing and fixind of factory made 30mm P.V.C rigid foam PANEL DOORS made Sqm
from MS tube of 19 guage, size of 19mm x 19mm and covered with heat moulded
PVC C Channel of 5 mm thick and width of 50mm to form styles and rails. The inner
panel should be inserted in between the frame with 5mm thick PVC rigid foam sheet,
welded/sealed to the styles and rails along with 5mm PVC, beeding on all and either
sides. The vertical tubes may be filled with suitable wood material to further enhance
the screw holding capacity

9.92 Providing and fixing PVC Hollow Door Frame of the size 50x47mm with a wall M
thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two
corners and joined with 2 Nos. of 15Dmm long brackets of 15x15mm M.S. Square
tube. The two vertical door profiles are to be reinforced with 19x19 mm M.S. Square
tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the
frame. The door screws through the frame by using PVC fasteners. A minimum of 4
Nos of screws to be provided for each vertical member & minimum 2 Nos. for
horizontal member

9.93 Providing and fixing factory made single leaf! rigid GRP Sandwich composite door Sqm
shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated
using U.V-stabilized lsopthalic Gelcoat and on layer of 45 gsm E-Giass Chopped
strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the
skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam
panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material.
Wooden reinforcements made of Seasoned Salwood block of cross section not less
than 28mmx32mm and also necessary salwood reinforcements for fixing the metal
fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural
adhesive compatible with EPS foam shall be used for bonding the core material, the
Salwood reinforcement and the skins. The material and process for manufacturing the
door shutters shall confirm to Standards and specifications and the door shutters
tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour
White/Ivory/Beige/Light Grey or any other colour using high quality pigments.
Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot
9.94 Providing and fixing factory made single leaf rigid GRP Sandwich composite door Sqm
shutter of 40 mm thick, laminated with two GRP skins with wood grain finish,
fabricated using UV-stabilized lsopthalic Gelcoat and one layer of 450 gns E-Giass
Chopped Strand Mat (CSM), impregnated with orthopthalic polyester resin. The
thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS)
structural foam panel of 37mm thickness and a density of 20 Kg/m3 shall be used as
core material. Wooden reinforcements made of Seasoned Salwood block of cross
section not lessthan 36mmx32mmand also necessary salwood reinforcements for
fixing the metal fittings such as tower bolts, aldrops, handles, etc. shall be provided. A
structural adhesive compatible with EPS foam shall be used for bonding the core
material, the salwood reinforement and the skins. The material and process for
manufacturing the door shutters shall confirm to Standards and specifications and the
door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be
plain coulur White/IVORY/Beige/Light Grey or any other colour using high quality
pigments. Excluding cost of fixtures and inclusive of supply of shutters to respective
work spot

9.95 Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Giass Chopped M
Strand Mat (CSM). U V-stabilized lsopthalic Gelcoat and lsopthalic resin. The
thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of
four segmens, which are provided with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are joined together by means of screws. The
GRP frame shall be provided with wooden reinforcement of 61ocations fro high screw
holding capacity for fixing metallic hold fast and shall be consolidated by filling with
medium density foam/Plaster with fibre reinforcement Six Numbers of
260mmx25mmx5mm sizeS shaped M.S. flat hold fast shall be provided with the frame.

9.96 Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Giass M
Chopped Strand Mat (CSM) U.V- stabilized lsopthalic Gelcoat and lsopthalic resin. The
thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of
four segments, which are provided with plug-in-socket arrangement in-situ in the
mould. The segments are plugged in and are joined together by means of screws. The
GRP frame shall be provided with wooden reinforcement on 6 locations for high screw
holding capacity for fixing metalling hold fast and shall be consolidated by filling with
medium density foam/Plaster of Paris with fibre reinforcement Six Numbers of
260mmx25mmx5mm sizeS shaped M.S. flat hold fast shall be provided with the
frame..

9.97 Providing G.R.P. unbreakable railings available in a wide range of attractive colours Each
made out of cross section >70mmx64mm of standard length 7 feet (approximate
3.6Kg/m). The material and process for manufacturing railings shall confirm to
standards and specifications.
9.98 Providing and fixing pre fabricated non-monolithic R.C.C. Door Frames factory M
manufactured in separate parts and assembled at bolt nuts system with mechanical
table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 with a
cross section of 60 mm x 100 mm reinforced with 1.70 kg of TMT steel reinforced with
3 Nos. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 em c/c in
triangle shape per meter length of door frames, including cost of steel and fabrication
charges having 3/4 No. Stainless Steel hinges plate attachment made of 165 mm x 25
mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling
for fixing flat CSK Head Machine screws and nut made out of 304 grade stainless
steel screws, nut and MS square nut of size 8 x 8 square and length 10 mm and
making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts
etc., complete including two coats of oil based enamel primer providing without cill for
shutter thickness upto 30 mm, 21 days tank immersed curing including cost of labour,
materials, HOM etc., complete excluding the cost of door fixtures as per the direction
of Engineer.

9.99 Providing and fixing mosquito mesh to mesh to windows with 7.5 mm to 1.25 mm thick Sqm
Honne wood petties including labour charges etc., complete.
9.100 Providing and fixing require line and slope roofing with semi-corrugated PVC roofing Sqm
sheets of industrial profile 250/40 in 2.00 mm thick white colour, fire and heat resistant
having width of 1.054 mtrs. fixed with self tapping screws with washers, over the
existing purlins, rafters and trusses including cost of materials, labour, complete as per
specification.
9.101 Providng and fixng Teak Wood Hand railing to stair case using bulusters of sections RMt
40mm x 25mm as per design drawing No: 11863 / railings issued by the Principal
Chief Architect and fixing it to the steps using anchor bolts and necessary adhesive
materiasl and fixing T.W.handrail of section 75 x 75 mm to bulusters and finishing the
same by using colourless polish etc., complete. The work includes cost of all materials,
labour charges for all items of work, hire charges for welding, cutting and grinding
equipment, and electricity charges, with lead and lift, loading and unloading charges,
etc., complete as per drawing and specification

9.102 Providing Maranthi wood frames of doors, windows, clear story windows, ventilation cum
and other frames, wrought, framed or assembled including making plaster grooves
(excluding cost of concrete cement and side clamps) but including cost of materials,
labours, HOM of machineries complete as per specifications.

9.103 Providing & Fixing Mosquito mesh shutters made out of Stainless Steel mosquito proof Sqm
mesh with 95% & above visibility which is fixed to the powder coated aluminium frame
32mm thick of approved shade. The work including fixing the shutters with necessary
accessories, to complete as per specification including the labour charges for fixing
the shutter to the existing frames.
9.104 Providing & Fixing Mosquito mesh shutters made out of Stainless Steel mosquito proof Sqm
mesh with 95% & above visibility which is fixed to the powder coated aluminium frame
20mm thick of approved shade. The work including fixing the shutters with necessary
accessories, to complete as per specification including the labour charges for fixing
the shutter to the existing frames.
9.106.1 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 30mm thick both side teak

9.106.2 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 30mm thick one side teak and
one side commercial

9.106.3 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 30mm thick both side
commercial

9.106.4 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 35mm thick both side teak
9.106.5 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 35mm thick one side teak and
one side commercial

9.106.6 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 35mm thick both side
commercial

9.106.7 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 40mm thick both side teak

9.106.8 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 40mm thick one side teak and
one side commercial

9.106.9 Providing and fixing flush door shutter made out of solid core black board type, well Sqm
seasoned chemically treated hard wood battens and internal frame with minimum 45
mm wide wooden frame all-round door shutters covered with cross bonded wooden
sheets (core veneer) hot pressed and fastened on both sides of the door using liquid
phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From
manufacturer (Factory) complete as per specification. - 40mm thick both side
commercial

9.107 Providing and fixing to the existing door frames, factory made single leaf HDF – Teak Sqm
Veneer skin sandwich composite door shutter of 40 mm thickness made out of
honeycomb of 34 mm thick and surrounded by good quality properly seasoned
wooden reinforcements of size 33 mm X 65 mm for fixing fixtures such as tower bolts,
aldrops, handles etc., and laminated on either sides with 3 mm thick wood grain finish
good quality HDF-Teak Veneer skins, using structural bonding material compatible with
honeycomb core, wood and HDF- Teak Veneer skin and the whole assembly is
bonded together at high temperature and pressure using 650 tonnage heated
compression moulding press.All the four sides of the door shutter are applied with two
coats of UV stabilized polyester resin putty to completely cover and seal the wood
from water ingression. The material and process for manufacturing the door shall
confirm to RV-TIFAC composites design centre standards and specification and the
door shutters tested in confirmation to IS4020-1994, including cost of all materials,
labour charges, HOM and machineries etc. complete but excluding the cost of fixtures.
9.108 Providing and fixing to the existing door frames, factory made single leaf HDF skin Sqm
sandwich composite door shutter of 40 mm thickness made out of honeycomb of 34
mm thick and surrounded by good quality properly seasoned wooden reinforcements
of size 33 mm X 65 mm for fixing fixtures such as tower bolts, aldrops, handles etc.,
and laminated on either sides with 3 mm thick wood grain finish good quality HDF
skins, using structural bonding material compatible with honeycomb core, wood and
HDF skin and the whole assembly is bonded together at high temperature and
pressure using 650 tonnage heated compression moulding press. The HDF
Composite door surface is coated with 2 coats of high quality primer.The front and
back surfaces of the door shutter and all the four sides are painted with two coats of
high quality paint of any desired colour. The material and process for manufacturing
the door shall confirm to RV-TIFAC composites design centre standards and
specification and the door shutters tested in confirmation to IS4020-1994, including
cost of all materials, labour charges, HOM and machineries etc. complete but
excluding the cost of fixtures.

9.109 Providing and fixing to the existing door frames, factory made single leaf HDF – Teak Sqm
Veneer skin sandwich composite door shutter of 32 mm thickness made out of
honeycomb of 29 mm thick and surrounded by good quality properly seasoned
wooden reinforcements of size 28 mm X 40 mm for fixing fixtures such as tower bolts,
aldrops, handles etc., and laminated on either sides with 3 mm thick wood grain finish
good quality HDF- Teak Veneer skins, using structural bonding material compatible
with honeycomb core, wood and HDF- Teak Veneer skin and the whole assembly is
bonded together at high temperature and pressure using 650 tonnage heated
compression moulding press. All the four sides of the door shutter are applied with two
coats of UV stabilized polyester resin putty to completely cover and seal the wood
from water ingression. The material and process for manufacturing the door shall
confirm to RV-TIFAC composites design centre standards and specification and the
door shutters tested in confirmation to IS4020-1994, including cost of all materials,
labour charges, HOM and machineries etc. complete but excluding the cost of fixtures.

9.110 Providing and fixing to the existing door frames, factory made single leaf HDF skin Sqm
sandwich composite door shutter of 32 mm thickness made out of honeycomb of 26
mm thick and surrounded by good quality properly seasoned wooden reinforcements
of size 25 mm X 65 mm for fixing fixtures such as tower bolts, aldrops, handles etc.,
and laminated on either sides with 3 mm thick wood grain finish good quality HDF
skins, using structural bonding material compatible with honeycomb core, wood and
HDF skin and the whole assembly is bonded together at high temperature and
pressure using 650 tonnage heated compression moulding press. The HDF
Composite door surface is coated with 2 coats of high quality primer.The front and
back surfaces of the door shutter and all the four sides are painted with two coats of
high quality paint of any desired colour. The material and process for manufacturing
the door shall confirm to RV-TIFAC composites design centre standards and
specification and the door shutters tested in confirmation to IS4020-1994, including
cost of all materials, labour charges, HOM and machineries etc. complete but
excluding the cost of fixtures.
9.111 Providing and fixing to the existing door frames, factory made single leaf HDF skin Sqm
sandwich composite door shutter of 32 mm thickness made out of honeycomb of 26
mm thick and surrounded by good quality properly seasoned wooden reinforcements
of size 25 mm x 65 mm for fixing fixtures such as tower bolts, aldrops, handles etc.,
and laminated on either sides with 3 mm thick wood grain finish good quality HDF
skins, using structural bonding material compatible with honeycomb core, wood and
HDF skin and the whole assembly is bonded together at high temperature and
pressure using 650 tonnage heated compression moulding press. The HDF
Composite door surface is coated with 2 coats of high quality primer.The front and
back surfaces of the door shutter and all the four sides are painted with two coats of
high quality paint of any desired colour. The material and process for manufacturing
the door shall confirm to RV-TIFAC composites design centre standards and
specification and the door shutters tested in confirmation to IS4020-1994, including
cost of all materials, labour charges, HOM and machineries etc. complete but
excluding the cost of fixtures.
Basic Rate
4,987.00

77,329.00

55,564.00

50,804.00

42,555.00

142,375.00

78,593.00

56,828.00

52,067.00

6,702.00

4,380.00

3,554.00
6,338.00

4,186.00

3,419.00

5,974.00

3,992.00

3,283.00

5,627.00

3,799.00

2,068.00

5,972.00
4,023.00

5,608.00

3,829.00

5,172.00

3,597.00

4,963.00

3,480.00

3,477.00
3,458.00

3,322.00

3,249.00

3,264.00

3,241.00

3,089.00

3,070.00

2,935.00
6,884.00

4,564.00

3,682.00

3,713.00

6,008.00

4,075.00

3,339.00

3,469.00

5,570.00

3,829.00

3,168.00
2,985.00

2,951.00

6,105.00

4,268.00

3,570.00

3,609.00

5,557.00
3,962.00

3,356.00

3,203.00

5,128.00

3,726.00

3,187.00

2,959.00

4,664.00

3,390.00
4,336.00

3,206.00

4,006.00

3,022.00

5,358.00

3,868.00

3,268.00

3,269.00

2,458.00
2,118.00

1,381.00

938.00

796.00

2,777.00

468.00

3,746.00
2,798.00

1,785.00

2,000.00

250.00

250.00

3,250.00
3,800.00

2,400.00

360.00

3,000.00
3,800.00

450.00

550.00

400.00

877.00

715.00
 820.00

10,215.00

45,613.00

3,200.00

2,900.00

3,702.00

3,156.00

2,308.00

3,944.00
3,350.00

2,550.00

4,065.00

3,580.00

2,793.00

2,350.00
1,532.00

2,128.00

1,437.00
1,655.00
Item No. Description Unit
10.1 KSRB 10-2 : Providing and laying in position yelahanka tiles of size 250 x 250mm of Sqm
approved quality and make, over a bed of cement mortar 1:3 an average thickness
25mm over weather proof course and pointed with cement mortar 1:3 mix with red
oxide including curing cost of materials, labour complete as per specifications.
Specification No. KBS
10.2 KSRB 10-3 : Providing and laying integral cement based waterproofing treatment Sqm
including preparation of surface as required for treatment of roofs, balconies, terraces
etc., consisting of following application. (a) Applying and grouting a slurry coat of neat
cement using 2.75 kg/sqm of cement admixed with proprietary water proofing
compound conforming to IS:2645 over the RCC slab after cleaning the surface before
treatment. (b) Laying cement concrete using broken brick bats 25mm to 100mm size
with 50% of cement mortar 1:5 admixed with proprietary water proofing compound
conforming IS:2645 over 20mm thick layer of cement mortar 1:5 admixed with
proprietary water proofing compound to required slope and treating similarly the
adjoining walls upto 300mm height including rounding off junctions of walls and slabs.
(c) After two days of proper curing, applying a second coat of cement lurry admixed
with proprietary water proofing compound (d) Finishing the surface with 20mm thick
jointless cement mortar of mix 1:4 admixed with proprietary water proofing compound
and finally finishing the surface with trowel and neat cement slurry and making of
300x300mm square. (e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test including cost of materials,
labour complete as per specifications.

10.3 KSRB 10-4 : Providing and laying four courses water proofing treatment with bitumen Sqm
felt over roof consisting of first and third courses of blown and / or residual bitumen
applied hot at 1.45 kg / sqm of area for each course second course of roofing felt Type
- 3 grade-I ( hessian based self finish bitumen felt ) and forth and final course of stone
grit 6mm and down size or pea sized gravel spread at 0.06 cum. / sqm including
preparation of surface but excluding grading complete with bitumen felt ( hessian
based ) Type - 3 grade-I blown or / and residual bitumen applied hot 1.4 kg / sqm
including cost of materials, labour complete as per specifications. KBS 10.4.3

10.4 KSRB 10-5 : Providing and laying six courses water proofing treatment with bitumen Sqm
felt over roof consisting of first, third and fifth courses of blown and / or residual
bitumen applied hot at 1.45 kg, 1.2kg and 1.7kg / sqm of area respectively, second
and fourth courses of roofing felt Type -2 grade-I ( fibre based self finish bitumen felt )
and sixth and final course of stone grit 6mm and down size or pea sized gravel spread
at 0.06 cum. / sqm including preparation of surface, excluding grading but including
cost of materials, labour complete as per specifications. KBS 10.4.3

10.5.1 Waterproofing of RCC Terrace / podium slab / toilet / utilities / water retaining structure Sqm
by preparing the surface by chipping and cleaning and Grouting of Honey comb,
voids,cracks / construction joints with cement slurry (1kg cement added in 10 ltr of
water) added with 100gm of inorganic accelerator, followed by spraying of liquid
biological modified alkaline earth silicates @ 0.40 ltr per sqm on whole surface to
reduce the micro porosity and allowing it to dry, curing the surface for the silicates to
penetrate deeper into the concrete and spraying waterproofing impregnate liquid
containing silane and silanol linear copolymer @ 0.50 ltr per sqm and finally applying
polymer slurry made out of cross linked acrylic / styrene / butadiene & cement in the
ratio of 1:0.1, @0.50kg/sqm on the whole surface, including all labour charges tools
and equipments, all complete as per the specification

10.5.2 Bore Packing : filling the bore wherever necessary with polymer modified concrete and Sqm
brushing one coat of acrylic copolymer cross linked formulation on the bore. including
all labour charges tools and equipments, all complete as per the manufacturer
10.5.3 Extra for water proofing the inside surface of tanks (OHT & UGT) - applying of Sqm
modified polymers soft acrylic esters coat @0.40 kg/sqm in 2 coats including all labour
charges tools and equipments, all complete as per the specification.
10.6 Providing and fixing food grade epoxy painting to over head tank and sump tank after Sqm
cleaning and drying including pumping and bailing out of water, including cost of all
materials labour lead and lifts etc., complete
10.7 Cleaning RCCsump tanks and RCC overhead tanks with mechanical dewatering L
including removal of sludge, mud, dirt, algea etc and cleanuing the wall surface of
tanks using high pressure jet, vacuum cleaning and spraying anti bacterial treatment
to the wall and ceiling surfaces and UV treatment, including removing of sludge etc.,
using suitable coconut broomstick, squeesers / wipers / rubber brushes, coir brushes,
plastic buckets, mugs, dewatering using motor with portal arrangement, hose pipe
etc., complete including all safety measures.

10.8 Providing and applying composite water proofing compound as impregnate only on Sqm
wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external
walls, flooring and other surfaces apart from water tanks, sumps, reservoirs, by mixing
the composite waterproofing compound with water in ratio of 1:10 to make a workable
slurry and pouring it on all cleaned and prepared corners and disturbed area and
further mixing in the ratio 1:20 AND pouring it on the prepared surface by cleaning the
surface with etchant chemical from dirt foreign materials etc., and allowing it to be
there upto 3 hours and then cleaning the same using water complete as per
specification so that the surface is got back and ready to use after 4 hours.

10.9 Providing and applying Polymer based water proofing slurry having chemical Sqm
resistance properties, capable of withstanding a Temperature of 200 DegC for
Protective Negative coating for Water Dampness & seepages, comprising of Portland
cement, Lime stone, Silica sand, Alumina cement, sodium aluminate in the form of
powder composition at 3.30 kgs mixed with 1.0 liter of Acrylic emulsion, applied on
0.64 Sqm area/liter of slurry on a cleaned surface free of loose materials etc, complete
on all masonry structures, overhead tank, sump tank, water closet areas, sunken slab
and other such areas, filling tile joints, capable of Self curing within 3 to 4 hours of its
application in normal atmospheric condition, including cost of all materials, labour
charges, HOM and machineries etc., complete.
Basic Rate
983.00

1,020.00

240.00

411.00

575.00

240.00
 275.00

100.00

0.50

577.00

2,767.00
Item No. Description Unit
11.1 KSRB 12-1.1 : Providing and laying in position to required level or slope 100mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.2 KSRB 12-1.2 : Providing and laying in position to required level or slope 150mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.3 KSRB 12-1.3 : Providing and laying in position to required level or slope 200mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7 200mm
11.4 KSRB 12-1.4 : Providing and laying in position to required level or slope 230mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.5 KSRB 12-1.5 : Providing and laying in position to required level or slope 250mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.6 KSRB 12-1.6 : Providing and laying in position to required level or slope 300mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.7 KSRB 12-1.7 : Providing and laying in position to required level or slope 350mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.8 KSRB 12-1.8 : Providing and laying in position to required level or slope 400mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.9 KSRB 12-1.9 : Providing and laying in position to required level or slope 450mm M
internal diameter salt glazed stoneware pipes grade A and jointing with stiff mixture of
cement mortar in proportion of 1:1, testing of pipes and joints,including cost of
materials, labour charges complete as per specifications. Specification No. KBS 12.2.5
/ 12.7
11.10 KSRB12-2.1 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 100mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2
11.11 KSRB 12-2.2 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 150mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2
11.12 KSRB 12-2.3 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 200mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing
11.13 KSRB 12-2.4 :Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 230mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing
11.14 KSRB 12-2.5 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 250mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2
11.15 KSRB 12-2.6 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 300mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2 300mm
11.16 KSRB 12-2.7 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 350mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2
11.17 KSRB 12-2.8 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 400mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2
11.18 KSRB 12-2.9 : Providing and laying in position plain cement concrete M7.5 40mm and M
down size graded granite metal, machine mixed concrete laid in layers not exceeding
15 cms thick, well compacted, for 450mm internal diameter stoneware pipes including
cost of materials, labour charges, HOM of machinery, curing complete as per
specifications Specification No. KBS 4.1 / 4.2
11.19 KSRB 12-3.1 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 100mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.20 KSRB 12-3.2 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 150mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.21 KSRB 12-3.3 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 200mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.22 KSRB 12-3.4 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 230mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2
11.23 KSRB 12-3.5 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 250mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.24 KSRB 12-3.6 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 300mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.25 KSRB 12-3.7 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 350mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.26 KSRB 12-3.8 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 400mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.27 KSRB 12-3.9 : Providing and laying in position plain cement concrete of mix M 7.5 M
using 40mm and down size graded granite / trap metal for haunching of 450mm
internal diameter stoneware pipes, concrete machine mixed laid in layers not
exceeding 15 cms thick, well compacted, including cost of materials, labour charges,
form work, HOM of machinery, curing complete as per specifications. Specification No.
KBS 4.1 / 4.2

11.28 KSRB 12-4.1 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 100mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.29 KSRB 12-4.2 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 150mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.30 KSRB 12-4.3 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 200mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.31 KSRB 12-4.4 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 230mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.32 KSRB 12-4.5 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 250mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.33 KSRB 12-4.6 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 300mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.34 KSRB 12-4.7 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 350mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.35 KSRB 12-4.8 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 400mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.36 KSRB 12-4.9 : Providing and laying in position plain cement concrete of M 7.5 using M
40mm and down size graded granite / trap metal for surrounded encasing 450mm
internal diameter stoneware pipes, concrete machine mixed well compacted including
cost of materials, labour charges, form work, HOM of machinery, curing complete as
per specifications. Specification No. KBS 4.1 / 4.2
11.37 KSRB 12-5.1 : Constructing brick masonry circular type manhole 0.91 m internal dia at Nos
bottom,0.91m deep and 0.56m dia at top with table moulded non-modular bricks of 50
class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with
cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M
10 using 40mm and downsize granite metal and making necessary channel in cement
concrete M 50 with 20mm and downsize granite metal finished with a floating coat of
neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20 grade designation)
560mm internal diametre confirming IS :12592, total weight cover and frame to be not
less than 182 kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite
metal, providing and removing centering, shuttering including cost of materials, labour
charges, HOM of mechineries complete as per specifications. (Excavation, footrests
and 12mm thick cement plaster on the external surface shall be paid seperately )
Specification No. KBS 12.4

11.38 KSRB 12-5.2 : Constructing brick masonry circular type manhole 1.67 m internal dia at Nos
bottom, 0.91m deep and 0.56m dia at top with table moulded non-modular bricks of 50
class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with
cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M
10 using 40mm and downsize granite metal and making necessary channel in cement
concrete M 50 with 20mm and downsize granite metal finished with a floating coat of
neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20 grade designation)
560mm internal diametre confirming IS :12592, total weight cover and frame to be not
less than 182 kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite
metal, providing and removing centering, shuttering including cost of materials, labour
charges, HOM of mechineries complete as per specifications. (Excavation, footrests
and 12mm thick cement plaster on the external surface shall be paid seperately )
Specification No. KBS 12.4
11.39 KSRB 12-5.3 : Constructing brick masonry circular type manhole 1.22 m internal dia at Nos
bottom, 1.68 m deep and 0.56m dia at top, with table moulded and non modular bricks
of class designation 50 in cement mortar 1:4, inside cement plaster 12mm thick with
cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M
10 using 40mm and down size granite metal and making necessary channel in cement
concrete M 15 with 20mm and down size granite metal, finished with a floating coat of
neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20 grade designation)
560mm internal diameter confirming to IS :12592, total weight length of cover and
frame to be not less than 182 kg, fixed in cement concrete M 15 20mm and down size
broken granite metal, providing and removing centering, shuttering including cost of
materials, labour charges, HOM of mechineries complete as per specifications.
( Excavation, footrests and 12mm thick cement plaster on the external surface shall be
paid seperately ) Specification No. KBS 12.4

11.40 KSRB 12-5.4 : – Constructing brick masonry circular type manhole 1.22 m internal dia Nos
at bottom, 2.29m deep and 0.56m dia at top, with table moulded and non modular
bricks of class designation 50 in cement mortar 1:4, inside cement plaster 12mm thick
with cement mortar 1:3, finished with a floating coat of neat cement, foundation
concrete M 10 using 40mm and down size granite metal and making necessary
channel in cement concrete M 15 with 20mm and down size granite metal, finished
with a floating coat of neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20
grade designation) 560mm internal diameter confirming to IS :12592, total weight
length of cover and frame to be not less than 182 kg, fixed in cement concrete M 15
20mm and down size broken granite metal, providing and removing centering,
shuttering including cost of materials, labour charges, HOM of mechineries complete
as per specifications. ( Excavation, footrests and 12mm thick cement plaster on the
external surface shall be paid seperately ) Specification No. KBS 12.4

11.41 KSRB 12-5.5 : Constructing brick masonry circular type manhole 1.52 m internal dia at Nos
bottom, 2.30m deep and 0.56m dia at top, with table moulded and non-modular bricks
of class designation 50 in cement mortar 1:4, inside cement plaster 12mm thick with
cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M
10 mixed using 40mm and down size granite metal and making necessary channel in
cement concrete 1:2:4 mix with 20mm anddown size granite metal, finished with a
floating coat of neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20 grade
designation) 560mm internal diameter confirming to IS :12592, total weight length of
cover and frame to be not less than 182 kg, fixed in cement concrete M 15 20mm and
down size broken granite metal, providing and removing centering, shuttering
including cost of materials, labour charges, HOM of mechineries complete as per
specifications. ( Excavation, footrests and 12mm thick cement plaster on the external
surface shall be paid seperately ) Specification No. KBS 12.4

11.42 KSRB 12-5.6 :Constructing brick masonry circular type manhole 1.52 m internal dia at Nos
bottom, 4.18m deep and 0.56m dia at top, with table moulded and non-modular bricks
of class designation 50 in cement mortar 1:4, inside cement plaster 12mm thick with
cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M
10 mixed using 40mm and down size granite metal and making necessary channel in
cement concrete 1:2:4 mix with 20mm anddown size granite metal, finished with a
floating coat of neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20 grade
designation) 560mm internal diameter confirming to IS :12592, total weight length of
cover and frame to be not less than 182 kg, fixed in cement concrete M 15 20mm and
down size broken granite metal, providing and removing centering, shuttering
including cost of materials, labour charges, HOM of mechineries complete as per
specifications. ( Excavation, footrests and 12mm thick cement plaster on the external
surface shall be paid seperately ) Specification No. KBS 12.4
11.43 KSRB 12-5.7 : Constructing circular type manhole 1500mm internal dia at bottom Nos
2.50m deep 525mm dia at top, in brick masonry with 1:5 cement mortar, cement
plaster 1:3, finish with a floating coat of neat cement, RCC 1:2:4 top slab using 20mm
and down size granite metal, foundation concrete M 7.5 using 40mm and down size
granite metal and making channels in cement concrete M 15 using 20mm and down
size granite metal, neatly finished curing, fixing CI cover complete including cost of
materials, labour charges, HOM of mechineries complete as per specifications.
(Excavation, footrests and 12mm thick cement plaster on the external surface shall be
paid seperately ) Specification No. KBS 12.4

11.44 KSRB 12-6.1 : Providing 20mm square M.S footrest and fixing in manhole with M 10 Nos
cement concrete block of 20x20x10cms, using 20mm and down size metal of size
including cost of materials, labour charges, curing complete as per specifications.
Specification No. KBS 12.4.6
11.45 KSRB 12-6.2 : Providing 20mm round M.S footrest and fixing in manhole with M 10 Nos
cement concrete block of 20x20x10cms, using 20mm and down size metal of size
including cost of materials, labour charges, curing complete as per specifications.
Specification No. KBS 12.4.6
11.46 KSRB 12-6.3 : Providing cast iron footrest and fixing in manhole with M 10 cement Nos
concrete block of 20x20x10cms, using 20mm and down size metal of size including
cost of materials, labour charges, curing complete as per specifications. Specification
No. KBS 12.4.6
11.47 KSRB 12-7.1 : Making connection of drain or sewer line of size 100 to 230mm external Nos
dia with existing manhole including breaking into and making good the walls, floors
with cement concrete M 15 with 20mm and downsize granite metal, cement plastered
on both sides of mix 1:3, finished with a floating coat of neat cement, and making
necessary channels for the drain, including cost of materials, labour charges, curing
complete as per specifications. Specification No. KBS

11.48 KSRB 12-7.2 : Making connection of drain or sewer line of size 250 to 300mm external Nos
dia with existing manhole including breaking into and making good the walls, floors
with cement concrete M 15 with 20mm and downsize granite metal, cement plastered
on both sides of mix 1:3, finished with a floating coat of neat cement, and making
necessary channels for the drain, including cost of materials, labour charges, curing
complete as per specifications. Specification No. KBS

11.49 KSRB 12-7.3 : Making connection of drain or sewer line of size 350 to 450mm external Nos
dia with existing manhole including breaking into and making good the walls, floors
with cement concrete M 15 with 20mm and downsize granite metal, cement plastered
on both sides of mix 1:3, finished with a floating coat of neat cement, and making
necessary channels for the drain, including cost of materials, labour charges, curing
complete as per specifications. Specification No. KBS

11.50.1 KSRB 12-8.1 : Constructing brick masonry inspection chamber 455x610mm, and Nos
450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-
modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light
duty) 455x610mm internal dimensions, total weight of cover with frame to be not less
than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with
cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M
5 with 40mm and downsize granite metal inside plastering 12mm thick with cement
mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete
complete as per standard design including cost of materials, labour charges, curing
complete as per specifications. Specification No. KBS
11.50.2 Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, Nos.
( clear inside dimension ) for single pipeline, using table moulded non-modular bricks
of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty)
455x610mm internal dimensions, total weight of cover with frame to be not less than
38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement
concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with
40mm and downsize granite metal inside plastering 12mm thick with cement mortar
1:3, finish smooth with a floating coat of cement on walls and bed concrete complete
as per standard design including cost of materials, labour charges, curing complete as
per specifications. Specification No. KBS 600x600mm and 450mm depth ( clear inside
dimension ) for single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 600x600mm

11.50.3 Constructing brick masonry inspection chamber 450x450mm, and 450mm depth, Nos.
( clear inside dimension ) for single pipeline, using table moulded non-modular bricks
of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty)
455x610mm internal dimensions, total weight of cover with frame to be not less than
38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement
concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with
40mm and downsize granite metal inside plastering 12mm thick with cement mortar
1:3, finish smooth with a floating coat of cement on walls and bed concrete complete
as per standard design including cost of materials, labour charges, curing complete as
per specifications. Specification No. KBS 450x450mm and 450mm depth ( clear inside
dimension ) for single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 450x450mm

11.50.4 Constructing brick masonry inspection chamber 450x300mm, and 450mm depth, Nos.
( clear inside dimension ) for single pipeline, using table moulded non-modular bricks
of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty)
455x610mm internal dimensions, total weight of cover with frame to be not less than
38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement
concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with
40mm and downsize granite metal inside plastering 12mm thick with cement mortar
1:3, finish smooth with a floating coat of cement on walls and bed concrete complete
as per standard design including cost of materials, labour charges, curing complete as
per specifications. Specification No. KBS 450x300mm and 450mm depth ( clear inside
dimension ) for single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 450x300mm

11.50.5 Constructing brick masonry inspection chamber 230x150mm, and 450mm depth, Nos.
( clear inside dimension ) for single pipeline, using table moulded non-modular bricks
of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty)
455x610mm internal dimensions, total weight of cover with frame to be not less than
38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement
concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with
40mm and downsize granite metal inside plastering 12mm thick with cement mortar
1:3, finish smooth with a floating coat of cement on walls and bed concrete complete
as per standard design including cost of materials, labour charges, curing complete as
per specifications. Specification No. KBS 230x150mm and 450mm depth ( clear inside
dimension ) for single pipeline, using table moulded non-modular bricks of class
designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 230x150mm

11.51 KSRB 12-8.1.1 : Extra for item no. KSRB 12-8.1 depth beyond 450mm and brick Each
masonry chamber with table moulded non modular bricks of class designation 50 in
cement mortar 1:5 for every 150mm depth or part thereof including cost of materials,
labour charges, curing complete as per specifications. Specification No. KBS
11.52 KSRB 12-8.2 : Constructing brick masonry inspection chamber 500x700mm, and Each
450mm depth, ( clear inside dimension ) for pipeline with one or two inlets, using table
moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover
with frame (light duty) 455x610mm internal dimensions, total weight of cover with
frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg )
R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal ,
foundation concrete M 5 with 40mm and downsize granite metal inside plastering
12mm thick with cement mortar 1:3, finished smooth with a floating coat of cement on
walls and bed concrete complete as per standard design including cost of materials,
labour charges, curing complete as per specifications. Specification No. KBS

11.53 KSRB 12-8.2.1 : Extra for item no. KSRB 12-8.2 depth beyond 450mm and brick Each
masonry chamber with table moulded non-modular bricks of class designation 50 in
cement mortar 1:5 for every 150mm depth or part thereof including cost of materials,
labour charges, curing complete as per specifications. Specification No. KBS

11.54 KSRB 12-8.3 : Constructing brick masonry inspection chamber 600x850mm, and Each
450mm depth, ( clear inside dimension ) for pipeline with three or more inlets, using
table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I
cover with frame (light duty) 455x610mm internal dimensions, total weight of cover
with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg )
R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal ,
foundation concrete M 5 with 40mm and downsize granite metal inside plastering
12mm thick with cement mortar 1:3, finished smooth with a floating coat of cement on
walls and bed concrete complete as per standard design including cost of materials,
labour charges, curing complete as per specifications. Specification No. KBS

11.55 KSRB 12-8.3.1 : Extra for item no. KSRB12-8.3 depth beyond 450mm and brick Each
masonry chamber with table moulded non-modular bricks of class designation 50 in
cement mortar 1:5 for every 150mm depth or part thereof including cost of materials,
labour charges, curing complete as per specifications. Specification No. KBS

11.56.1 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials, with 90mm outer
dia
11.56.2 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 110mm
outer dia
11.56.3 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 140mm
outer dia
11.56.4 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 160mm
outer dia
11.56.5 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 200mm
outer dia
11.56.6 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 225mm
outer dia
11.56.7 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 250mm
outer dia
11.56.8 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 280mm
outer dia
11.56.9 Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgf/sq.cm M
working pressure chemp plast / Wavin or equivalent make with pipe fittings, wall clips,
making good the wall, ceiling and floor, including cost of all materials,with 315mm
outer dia
Basic Rate
245.00

369.00

488.00

537.00

580.00

632.00

684.00

746.00

876.00

258.00

435.00
484.00

522.00

543.00

620.00

696.00

772.00

843.00

397.00

617.00

727.00

836.00
 848.00

979.00

1,119.00

1,259.00

1,397.00

811.00

986.00

1,150.00

1,255.00

1,332.00
 1,517.00

1,729.00

1,935.00

2,132.00

15,130.00

24,793.00
30,104.00

35,737.00

47,328.00

87,754.00
48,514.00

303.00

276.00

238.00

2,699.00

3,503.00

4,487.00

7,209.00
8,635.00

5,300.00

3,800.00

1,600.00

745.00
8,133.00

829.00

9,357.00

963.00

431.00

606.00

989.00

1,252.00

1,580.00

1,909.00
2,894.00

3,661.00

4,646.00
Item No. Description
12.1 KSRB 11-1 : Providing and fixing white vitreous china clay, water closet Indian type
( Squatting pan ) of size 580mm with footrests, 100mm S or P trap, 10 litre low level,
P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm
diameter flush pipe fittings and clamps, overflow arrangements with specials and
25mm mosquito proof coupling of approved design, painting of fittings and brackets,
cutting and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications. Specification No. KBS 11

12.2 KSRB 11-2 : Providing and fixing white vitreous china clay, water closet Orissa pattern
of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level,
P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm
diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm
mosquito proof coupling of approved design, painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications. Specification No. KBS 11

12.3 KSRB 11-3 : Providing and fixing white vitreous china clay, water closet Indian type
( Squatting pan ) of size 580mm with footrests, 100mm S or P trap, (approved make)
cutting and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications.
12.4 KSRB 11-4 : Providing and fixing white vitreous china clay, water closet Orissa pattern
of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved
make ) cutting and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications. Specification No. KBS 11

12.5 KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type
( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber
buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings,
C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow
arrangements with special and 25mm mosquito proof coupling of approved design,
painting of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11

12.6 KSRB 11-6 : Providing and fixing white vitreous china clay, water closet European type
( Pedestal type, S-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber
buffers. 10 litre white glazed / vitreous china clay low level, flushing cistern ( all are
approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with
fittings and clamps, overflow arrangements with specials and 25mm mosquito proof
coupling of approved design, painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of materials, labour complete as
per specifications. Specification No. KBS 11

12.7 KSRB 11-7.1 : Providing and fixing white vitreous china clay, flat back, lipped front
urinal basin of 430x260x350mm with 5 litres PVC automatic flushing cistern, C.I / M.S
brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I.
clamps complete painting of fittings and brackets, cutting and making good the wall
and floor wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11

12.8 KSRB 11-7.2 : Providing and fixing white vitreous china clay, flat back, lipped front
urinal basin of 430x260x350mm in the range of two 7.5 litre P.V.C with automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials, labour complete
as per specifications. Specification No. KBS 11
12.9 KSRB 11-7.3 : Providing and fixing white vitreous china clay, flat back, lipped front
urinal basin of 430x260x350mm in the range of three with 7.5 litres PVC automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps painting of fittings and brackets, cutting and making
good the wall and floor wherever required, including cost of materials, labour complete
as per specifications. Specification No. KBS 11

12.10 KSRB 11-7.4 : Providing and fixing white vitreous china clay, flat back, lipped front
urinal basin of 430x260x350mm in the range of four with 10 litres PVC automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps complete painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11

12.11 KSRB 11-8.1 : Providing and fixing white vitreous china clay, wall corner type, lipped
front urinal basin of size 340x410x265mm with 5 litres P.V.C automatic flushing cistern,
C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions
and G.I. clamps complete painting of fittings and brackets, cutting and making good
the wall and floor wherever required, including cost of materials, labour complete as
per specifications. Specification No. KBS 11

12.12 KSRB 11-8.2 : Providing and fixing white vitreous china clay, wall corner type, lipped
front urinal basin of size 340x410x265mm in the range of two with 7.5 litre P.V.C
automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications. Specification No. KBS 11

12.13 KSRB 11-8.3 : Providing and fixing white vitreous china clay, wall corner type, lipped
front urinal basin of size 340x410x265mm in the range of three with 7.5 litre P.V.C
automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications. Specification No. KBS 11

12.14 KSRB 11-8.4 : Providing and fixing white vitreous china clay, wall corner type, lipped
front urinal basin of size 340x410x265mm in the range of four with 10 litre P.V.C
automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps painting of fittings and brackets, cutting
and making good the wall and floor wherever required, including cost of materials,
labour complete as per specifications. Specification No. KBS 11

12.15 KSRB 11-9.1 : Providing and fixing white vitreous china clay, flat back or half stall
urinal basin of size 580x380x350mm with 5 litres P.V.C automatic flushing cistern, C.I /
M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I.
clamps C.I dtrap with outlet grating and other couplings in C.P brass, painting of
fittings and brackets, cutting and making good the wall and floor wherever required,
including cost of materials, labour complete as per specifications.

12.16 KSRB 11-9.2 : Providing and fixing white vitreous china clay, flat back or half stall
urinal basin of size 580x380x350mm in the range of two with 7.5 litres P.V.C automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps, C.I. trap with outlet grating and other couplings in C.P
brass painting of fittings and brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11
12.17 KSRB 11-9.3 : Providing and fixing white vitreous china clay, flat back or half stall
urinal basin of size 580x380x350mm in the range of three with 10 litres P.V.C
automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass
spreaders with brass unions and G.I. clamps, C.I. trap with outlet grating and other
couplings in C.P brass painting of fittings and brackets, cutting and making good the
wall and floor wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11

12.18 KSRB 11-9.4 : Providing and fixing white vitreous china clay, flat back or half stall
urinal basin of size 580x380x350mm in the range of four with 10 litres P.V.C automatic
flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps, C.I. trap with outlet grating and other couplings in C.P
brass painting of fittings and brackets, cutting and making good the wall and floor
wherever required, including cost of materials, labour complete as per specifications.
Specification No. KBS 11

12.19 KSRB 11-10.1 : Providing and fixing white vitreous china clay, squatting plate with 5
litre P.V.C automatic flushing cistern including brass coupling C.I / M.S brackets, G.I
flush pipe of standard size and C.P. brass spreaders painting of fittings and brackets,
cutting and making good the wall and floor wherever required, including cost of
materials, labour complete as per specifications. Specification No. KBS 11

12.20 KSRB 11-10.2 : Providing and fixing white vitreous china clay, squatting plate in the
range of two single squatting plate with 7.5 litre P.V.C automatic flushing cistern
including brass coupling C.I / M.S brackets, G.I flush pipe of standard size and C.P.
brass spreaders painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11

12.21 KSRB 11-10.3 : Providing and fixing white vitreous china clay, squatting plate in the
range of three single squatting plates with 10 litre P.V.C automatic flushing cistern
including brass coupling C.I / M.S brackets, G.I flush pipe of standard size and C.P.
brass spreaders painting of fittings and brackets, cutting and making good the wall and
floor wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11

12.22 KSRB 11-10.4 : Providing and fixing white vitreous china clay, squatting plate in the
range of four single squatting plates with one number 15 litre P.V.C automatic flushing
cistern including brass coupling C.I / M.S brackets, G.I flush pipe of standard size and
C.P. brass spreaders painting of fittings and brackets, cutting and making good the
wall and floor wherever required, including cost of materials, labour complete as per
specifications. Specification No. KBS 11

12.23 KSRB 11-11.1 : Providing and fixing white vitreous china clay, flat back wash basin
size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11

12.24 KSRB 11-11.2 : Providing and fixing white vitreous china clay, flat back wash basin
size 630x450mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11

12.25 KSRB 11-11.3 : Providing and fixing white vitreous china clay, flat back wash basin
size 550x400mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11
12.26 KSRB 11-11.4 : Providing and fixing white vitreous china clay, flat back wash basin
size 550x400mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11

12.27 KSRB 11-11.5 : Providing and fixing white vitreous china clay, flat back wash basin
size 450x300mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11

12.28 KSRB 11-11.6 : Providing and fixing white vitreous china clay, angle back wash basin
size 600x480mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications.
12.29 KSRB 11-11.7 : Providing and fixing white vitreous china clay, angle back wash basin
size 400x400mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32
mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and
making good the wall and floor wherever required, including cost of materials, labour
complete as per specifications. Specification No. KBS 11

12.30 KSRB 11-11.8 : Providing and fixing white vitreous china clay, surgeon type wash
basin size 660x460mm with a pair of 15mm C.P brass pillar taps with pair of elbow
operated levers, C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern,
painting of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications. KBS 11

12.31 KSRB 11-11.9 : Providing and fixing white vitreous china clay, surgeon type wash
basin size 660x460mm with single 15mm C.P brass pillar tap with single elbow
operated lever, C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern,
painting of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications. KBS 11

12.32 KSRB 11-12.1 : Providing and fixing kitchen sink of white glazed fire clay of size
600x450x250mm with M.S / C.I brackets, C.P brass chain with rubber plug, 32 mm
C.P. brass waste, tap with union, brass stop cock complete, painting of fittings and
brackets, cutting and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications. KBS 11

12.33 KSRB 11-12.2 : Providing and fixing kitchen sink of white glazed fire clay of size
750x450x250mm with M.S / C.I brackets, C.P brass chain with rubber plug, 32 mm
C.P. brass waste, tap with union, brass stop cock complete, painting of fittings and
brackets, cutting and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications. KBS 11

12.34 KSRB 11-13.1 : Providing and fixing laboratory sink of white glazed fire clay of size
600x450x200mm with M.S / C.I brackets, C.P brass chain with rubber plug, 32 mm
C.P. brass waste, tap with union, brass stop cock complete, painting of fittings and
brackets, cutting and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications. KBS 11
12.35 KSRB 11-13.2 : Providing and fixing laboratory sink of white glazed fire clay of size
450x300x150mm with M.S / C.I brackets, C.P brass chain with rubber plug, 32 mm
C.P. brass waste, tap with union, brass stop cock complete, painting of fittings and
brackets, cutting and making good the wall and floor wherever required, including cost
of materials, labour complete as per specifications KBS 11

12.36 KSRB 11-14.1 : Providing and fixing stainless steel kitchen sink of size 510x1040mm
bowl depth 178mm, with drain board, M.S / C.I brackets, stainless steel plug 40 mm,
painting of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.

12.37 KSRB 11-14.2 : Providing and fixing stainless steel kitchen sink of size 500x1000mm
bowl depth 178mm, with drain board, M.S / C.I brackets, stainless steel plug 40 mm,
painting of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.

12.38 KSRB 11-14.3 : Providing and fixing stainless steel kitchen sink of size 400x915mm
bowl depth 160mm, with drain board, M.S / C.I brackets, stainless steel plug 40 mm,
painting of fittings and brackets, cutting and making good the wall and floor wherever
required, including cost of materials, labour complete as per specifications.

12.39 KSRB 11-15.1 : Providing and fixing 600x450mm bevelLead edge mirror of superior
glass with 6mm hard board backing and fixed to wooden cleats with C.P screws,
washers, including cost of materials, labour complete as per specifications.

12.40 KSRB 11-15.2 : Providing and fixing 450mm dia circular shape mirror with plastic
moulded frame of approved make and shade with 6mm thick hard board backing
including cost of materials, labour complete as per specifications.
12.41 KSRB 11-15.3 : Providing and fixing 453x357mm dia rectangular shape mirror with
plastic moulded frame of approved make and shade with 6mm thick hard board
backing including cost of materials, labour complete as per specifications.
12.42 KSRB 11-15.4 : Providing and fixing 450x350mm dia oval shape mirror with plastic
moulded frame of approved make and shade with 6mm thick hard board backing
including cost of materials, labour complete as per specifications.
12.43 KSRB 11-15.5 : Providing and fixing 1500x450mm dia rectangular shape mirror with
plastic moulded frame of approved make and shade with 6mm thick hard board
backing including cost of materials, labour complete as per specifications.
12.44 KSRB 11-16 : Providing and fixing 600x120mm glass shelf supported on alluminium
angle frame with C.P brass brackets, guard rail fixed to wooden cleats with C.P. brass
screws and washers including cost of materials, labour complete as per specifications.

12.45 KSRB 11-17-1 : Providing and fixing C.P. brass towel rail 740mm length, 20mm dia
with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of
materials, labour complete as per specifications.
12.46 KSRB 11-17.2 : Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia
with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of
materials, labour complete as per specifications.
12.47 KSRB 11-18-1.1 : Providing and fixing sand cast iron soil waste and vent pipes 100mm
dia with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications. KBS 11-1.10

12.48 KSRB 11-18-1.2 : Providing and fixing sand cast iron soil waste and vent pipes 75mm
dia with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications.KBS 11-1.10
12.49 KSRB 11-18-1.3 : Providing and fixing sand cast iron soil waste and vent pipes 50mm
dia with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications. KBS 11-1.10

12.50 KSRB 11-18-2.1 : Providing and fixing sand cast iron soil waste bends 100 mm dia
with access door, insertion of rubber washers 3mm thick bolts and nut, with spun yarn
soaked in cement slurry and cement mortar 1:2 including cost of materials, labour,
testing complete as per specifications.
12.51 KSRB 11-18-2.2 : Providing and fixing sand cast iron soil waste bends 75mm dia with
access door, insertion of rubber washers 3mm thick bolts and nut, with spun yarn
soaked in cement slurry and cement mortar 1:2 including cost of materials, labour,
testing complete as per specifications.
12.52 KSRB 11-18-2.3 : Providing and fixing sand cast iron soil waste bends 50mm dia with
access door, insertion of rubber washers 3mm thick bolts and nut with spun yarn
soaked in cement slurry and cement mortar 1:2 including cost of materials, labour,
testing complete as per specifications
12.53 KSRB 11-18-3.1 : Providing and fixing sand cast iron soil waste plain bend, 100mm dia
with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications. KBS 11-1.10

12.54 KSRB 11-18-3.2 : Providing and fixing sand cast iron soil waste plain bend, 75mm dia
with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications KBS 11-1.10
12.55 KSRB 11-18-3.3 : Providing and fixing sand cast iron soil waste plain bend, 50mm dia
with spun yarn soaked in cement slurry and cement mortar 1:2 including cost of
materials, labour, testing complete as per specifications. KBS 11-1.10
12.56 KSRB 11-18-4.1 : Providing and fixing sand cast iron soil waste double equal junction
of required degree with access door 100x100x100x100mm, insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications. KBS 11-1.10
12.57 KSRB 11-18-4.2 : Providing and fixing sand cast iron soil waste double equal junction
of required degree with access door 75x75x75x75mm, insertion of rubber washers
3mm thick bolts and nuts, including cost of materials, labour, testing complete as per
specifications. KBS 11-1.10
12.58 KSRB 11-18-4.3 : Providing and fixing sand cast iron soil waste double equal junction
of required degree with access door 50x50x50x50mm, insertion of rubber washers
3mm thick bolts and nuts, including cost of materials, labour, testing complete as per
specifications. KBS 11-1.10
12.59 KSRB 11-18-5.1 : Providing and fixing sand cast iron soil waste single equal junction
of required degree with access door 100x100x100mm, insertion of rubber washers
3mm thick bolts and nuts, including cost of materials, labour, testing complete as per
specifications. KBS 11-1.10
12.60 KSRB 11-18-5.2 : Providing and fixing sand cast iron soil waste single equal junction
of required degree with access door 75x75x75mm, insertion of rubber washers 3mm
thick bolts and nuts, including cost of materials, labour, testing complete as per
specifications. KBS 11-1.10
12.61 KSRB 11-18-5.3 : Providing and fixing sand cast iron soil waste single equal junction
of required degree with access door 50x50x50mm, insertion of rubber washers 3mm
thick bolts and nuts, including cost of materials, labour, testing complete as per
specifications. KBS 11-1.10
12.62 KSRB 11-18-6.1 : Providing and fixing sand cast iron soil waste double unequal
junction of required degree with access door 100x100x75x75mm, insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications. KBS 11-1.10
12.63 KSRB 11-18-6.2 : Providing and fixing sand cast iron soil waste double unequal
junction of required degree with access door 100x100x50x50mm, insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications. KBS 11-1.10
12.64 KSRB 11-18-6.3 : Providing and fixing sand cast iron soil waste double unequal
junction of required degree with access door 75x75x50x50mm, insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications. KBS 11-1.10
12.65 KSRB 11-18-7.1 : Providing and fixing sand cast iron soil waste single unequal
junction of required degree with access door 100x100x75mm,insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications. KBS 11-1.10
12.66 KSRB 11-18-7.2 : Providing and fixing sand cast iron soil waste single unequal
junction of required degree with access door 100x100x50mm, insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications. Specification No. KBS 11.1.10
12.67 KSRB 11-18-7.3 : Providing and fixing sand cast iron soil waste single unequal
junction of required degree with access door 75x75x50mm, insertion of rubber
washers 3mm thick bolts and nuts, including cost of materials, labour, testing complete
as per specifications Specification No. KBS 11.1.10
12.68 KSRB 11-18-8.1 : Providing and fixing sand cast iron soil waste double equal junction
of required degree 100x100x100x100mm, including cost of materials, labour, testing
complete as per specifications. Specification No. KBS 11.1.10
12.69 KSRB 11-18-8.2 : Providing and fixing sand cast iron soil waste double equal junction
of required degree 75x75x75x75mm, including cost of materials, labour, testing
complete as per specifications. Specification No. KBS 11.1.10
12.70 KSRB 11-18-8.3 : Providing and fixing sand cast iron soil waste double equal junction
of required degree 50x50x50x50mm, including cost of materials, labour, testing
complete as per specifications. Specification No. KBS 11.1.10
12.71 KSRB 11-18-9.1 : Providing and fixing sand cast iron soil waste single equal junction
of required degree with access door 100x100x100mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.72 KSRB 11-18-10.1 : Providing and fixing sand cast iron soil waste double unequal
junction of required degree100x100x75x75mm, including cost of materials, labour,
testing complete as per specifications. KBS 11-1.10
12.73 KSRB 11-18-11.1 : Providing and fixing sand cast iron soil waste single unequal
junction of required degree 100x100x75mm, including cost of materials, labour, testing
complete as per specifications. KBS 11-1.10
12.74 KSRB 11-18-11.2 : Providing and fixing sand cast iron soil waste single unequal
junction of required degree 100x100x50mm, including cost of materials, labour, testing
complete as per specifications. KBS 11-1.10
12.75 KSRB 11-18-11.3 : Providing and fixing sand cast iron soil waste single unequal
junction of required degree 75x75x50mm, including cost of materials, labour, testing
complete as per specifications. KBS 11-1.10
12.76 KSRB 11-18-12.1 : Providing and fixing sand cast iron soil waste double equal invert
plain branches of required degree 100x100x100x100mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.77 KSRB 11-18-12.2 : Providing and fixing sand cast iron soil waste double equal invert
plain branches of required degree 75x75x75x75mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.78 KSRB 11-18-12.3 : Providing and fixing sand cast iron soil waste double equal invert
plain branches of required degree 50x50x50x50mm, including cost of materials,
labour, testing complete as per specifications Specification No. KBS 11.1.10
12.79 KSRB 11-18-13.1 : Providing and fixing sand cast iron soil waste single equal invert
plain branches of required degree 100x100x100x100mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.80 KSRB 11-18-13.2 : Providing and fixing sand cast iron soil waste single equal invert
plain branches of required degree 75x75x75x75mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.81 KSRB 11-18-13.3 : Providing and fixing sand cast iron soil waste single equal invert
plain branches of required degree 50x50x50x50mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.82 KSRB 11-18-14.1 : Providing and fixing sand cast iron soil waste double unequal invert
plain branches of required degree 100x100x75x75mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.83 KSRB 11-18-14.3 : Providing and fixing sand cast iron soil waste double equal invert
plain branches of required degree 75x75x50x50mm, including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.84 KSRB 11-18-15.1 : Providing and fixing sand cast iron soil waste single unequal invert
plain branches of required degree 100x100x75mm, including cost of materials, labour,
testing complete as per specifications. Specification No. KBS 11.1.10

12.85 KSRB 11-18-15.2 : Providing and fixing sand cast iron soil waste single unequal invert
plain branches of required degree 75x75x50mm including cost of materials, labour,
testing complete as per specifications. Specification No. KBS 11.1.10
12.86 KSRB 11-18-16.1 : Providing and fixing sand cast iron soil waste 152mm offsets for
100mm pipes, including cost of materials, labour, testing complete as per
specifications. Specification No. KBS 11.1.10
12.87 KSRB 11-18-16.2 : Providing and fixing sand cast iron soil waste 114mm offsets for
75mm pipes, including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1.10
12.88 KSRB 11-18-16.3 : Providing and fixing sand cast iron soil waste 230 mm offsets for
75mm pipes, including cost of materials, labour, testing complete as per specifications.
Specification No. KBS 11.1.10
12.89 KSRB 11-18-17.1 : Providing and fixing sand cast iron trap of 100mm dia, of self
cleaning design with screwed down or hinged grating with or without vent arm
including cutting and making good the walls and floors, cost of materials, labour,
testing, complete as per specifications Specification No. KBS 11.1.10
12.90 KSRB 11-18-17.2 : Providing and fixing sand cast iron trap of 75mm dia, of self
cleaning design with screwed down or hinged grating with or without vent arm
including cutting and making good the walls and floors, cost of materials, labour,
testing, complete as per specifications. Specification No. KBS 11.1.10
12.91 KSRB 11-18-17.3 : Providing and fixing sand cast iron trap of 50mm dia, of self
cleaning design with screwed down or hinged grating with or without vent arm
including cutting and making good the walls and floors, cost of materials, labour,
testing, complete as per specifications. Specification No. KBS 11.1.10
12.92 KSRB 11-18-18.1 : Providing lead caulked joints to sand cast iron / cast iron ( spun )
pipes and fittings of 100mm dia, including cost of materials, labour, testing, complete
as per specifications. Specification No. KBS 13.2.7
12.93 KSRB 11-18-18.2 : Providing lead caulked joints to sand cast iron / cast iron ( spun)
pipes and fittings of 75mm dia, including cost of materials, labour, testing, complete as
per specifications specification No. KBS 13.2.7
12.94 KSRB 11-18-18.3 : Providing lead caulked joints to sand cast iron / cast iron ( spun)
pipes and fittings of 50mm dia, including cost of materials, labour, testing, complete as
per specifications Specification No. KBS 13.2.7
 12.95 KSRB 11-18-9.2 : Providing and fixing sand cast iron soil waste single equal junction
of required degree with access door 75x75x75mm, including cost of materials, labour,
testing complete as per specifications Specification No. KBS 11.1.10

12.96 KSRB 11-18-9.3 : Providing and fixing sand cast iron soil waste single equal junction
of required degree with access door 50x50x50mm, including cost of materials, labour,
testing complete as per specifications. Specification No. KBS 11.1.10

12.97 KSRB 11-18-10.2 : Providing and fixing sand cast iron soil waste double unequal
junction of required degree100x100x50x50mm, including cost of materials, labour,
testing complete as per specifications. Specification No. KBS 11.1.10
12.98 KSRB 11-18-10.3 : Providing and fixing sand cast iron soil waste double unequal
junction of required degree 75x75x50x50mm, including cost of materials, labour,
testing complete as per specifications.
12.99 KSRB 11-18-19.1 : Providing and fixing M.S stays and clamps for sand cast iron pipes
of 100mm dia including cost of materials, labour, complete as per specifications.

12.100 KSRB 11-18-19.2 : Providing and fixing M.S stays and clamps for sand cast iron pipes
of 75mm dia including cost of materials, labour, complete as per specifications.

12.101 KSRB 11-18-19.3 : Providing and fixing M.S stays and clamps for sand cast iron pipes
of 50mm dia including cost of materials, labour, complete as per specifications.

12.102 KSRB 11-18-14.2 : Providing and fixing sand cast iron soil waste double unequal invert
plain branches of required degree 100x100x75x75mm including cost of materials,
labour, testing complete as per specifications. Specification No. KBS 11.1.10

12.103 Providing (China Clay) glazed foot rests of approved 1st quality and make conforming
to ISI specifications and fixing in CM (1:3) as directed (Rate includes cost of materials
and conveyance to work spot).
12.104.1 Providing plastic seat with approved 1st quality and make conforming to ISI
specifications double flapped and fixing to English water closet with all fittings (Rate
includes cost of materials, fixtures and conveyance to work spot). - WHITE
12.104.2 Providing plastic seat with approved 1st quality and make conforming to ISI
specifications double flapped and fixing to English water closet with all fittings (Rate
includes cost of materials, fixtures and conveyance to work spot). - BLACK
12.105 Providing 3 cms dia GI telescopic flush tank lever of approved 1st quality and make
conforming to ISI specifications and fixing in position as directed by the Engineer. Rate
includes cost of materials and conveyance to work spot.
12.106 Providing vulcanizing or rubber float of approved 1st quality and make conforming to
ISI Specifications and fixing for low down cistern as directed .Rate includes cost of
materials and conveyance to work spot.
12.107 Providing wash basin brackets of approved 1st quality and make conforming to ISI
Specifications and fixing for low down cistern as directed .Rate includes cost of
materials and conveyance to work spot.
12.108 Providing pedestal for wash basin of approved 1st quality and make conforming to ISI
Specifications and fixing for low down cistern as directed .Rate includes cost of
materials and conveyance to work spot.
12.109 Providing and fixing white vitreous china clay urinals with flat back of approved make
fixed to wooden plugs including bends, painting white to exposed pipes etc., complete
as per directions.(rate includes cost of all materials and lead).A grade.

12.110 Providing white vitreous china clay Indian pattern squatting urinals with white glazed
foot rests of approved quality and make conforming to ISI specifications and fixing in
Position with M-15 as directed of size 50.8 cms X 38 cms X 10.16 cms - A Grade (Rate
includes cost of all materials and conveyance to work spot).
12.111 Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia.
12.112.1 Providing stoneware gully trap of approved quality and make fixing in M-15 and
plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials,
fixtures and lead).- 10cms x 10cms
12.112.2 Providing stoneware gully trap of approved quality and make fixing in M-15 and
plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials,
fixtures and lead). - 15cms x 10cms
12.113.1 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications
and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of
materials and fixtures and conveyance of materials to work spot). - 10cms x 7.5cms

12.113.2 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications
and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of
materials and fixtures and conveyance of materials to work spot). - 12.5cms x 7.5cms

12.114.1 Cleaning the blockages of closets and soil pipes into working order with scaffolding

12.114.2 Cleaning the blockages of closets and soil pipes into working order without scaffolding

12.114.3 Cleaning the blockages of closets and soil pipes into working order underground stone
ware pipes
12.115 Providing and fixing white vitreous china clay, wall corner type, lipped front watrless
urinal basin of size 328x319x598mm C.I / M.S brackets, standard flush pipe complete
painting of fittings and brackets, cutting and making good the wall and floo

12.116.1 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working
pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor
for sanitary pipelines including cost of all materials, labour charges, HOM of
acquirements and testing complete as per specifications. - 110mm dia

12.116.2 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working
pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor
for sanitary pipelines including cost of all materials, labour charges, HOM of
acquirements and testing complete as per specifications. - 140mm dia

12.116.3 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working
pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor
for sanitary pipelines including cost of all materials, labour charges, HOM of
acquirements and testing complete as per specifications. - 160mm dia

12.116.4 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working
pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor
for sanitary pipelines including cost of all materials, labour charges, HOM of
acquirements and testing complete as per specifications. - 200mm dia

12.116.5 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working
pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor
for sanitary pipelines including cost of all materials, labour charges, HOM of
acquirements and testing complete as per specifications. - 250mm dia
Unit Basic Rate
pan 3,515.00

pan 4,234.00

pan 1,331.00

pan 2,067.00

Each 4,956.00

Each 4,807.00

Unit 3,072.00

Unit 4,165.00
Unit 5,814.00

Unit 7,091.00

Unit 2,984.00

Unit 3,832.00

Unit 4,495.00

Unit 5,157.00

Unit 4,975.00

Unit 8,073.00
Unit 10,985.00

Unit 13,897.00

Unit 3,389.00

Unit 5,161.00

Unit 6,747.00

Unit 8,439.00

Unit 4,007.00

Unit 3,149.00

Unit 3,879.00
Unit 3,021.00

Unit 2,807.00

Unit 3,288.00

Unit 3,026.00

Unit 4,605.00

Unit 4,082.00

Unit 3,493.00

Unit 4,114.00

Unit 3,559.00
Unit 3,260.00

Unit 14,254.00

Unit 8,860.00

Unit 6,454.00

Unit 1,157.00

Unit 828.00

Unit 1,136.00

Unit 874.00

Unit 1,481.00

Unit 1,082.00

Unit 739.00

Unit 674.00

M 666.00

M 634.00
 M 324.00

Each 507.00

Each 435.00

Each 414.00

Each 974.00

Each 315.00

Each 352.00

Each 1,078.00

Each 798.00

Each 705.00

Each 933.00

Each 705.00

Each 560.00

Each 1,078.00
Each 1,078.00

Each 456.00

Each 829.00

Each 788.00

Each 570.00

Each 860.00

Each 653.00

Each 445.00

Each 933.00

Each 1,078.00

Each 507.00

Each 523.00

Each 435.00

Each 990.00

Each 653.00

Each 451.00
Each 912.00

Each 705.00

Each 622.00

Each 1,047.00

Each 580.00

Each 508.00

Each 435.00

Each 674.00

Each 425.00

Each 726.00

Each 830.00

Each 756.00

Each 698.00

Joint 129.00

Joint 111.00

Joint 93.00
Each 705.00

Each 560.00

Each 1,078.00

Each 580.00

No 308.00

No 308.00

No 58.00

Each 1,029.00

Pair 175.00

Pair 265.00

Pair 225.00

Each 210.00

Each 165.00

Pair 240.00

Each 900.00

Each 850.00

Each 950.00

Each 150.00
Each 190.00

Each 280.00

Each 250.00

Each 285.00

M 60.00

M 50.00

M 20.00

Unit 23,862.00

M 434.00

M 688.00

M 853.00

M 1,354.00

M 2,075.00
Item No. Description Unit
13.1 KSRB13-1.1 : Providing and fixing to wall, ceiling and floor galvanised / mild M
steel tube 15mm dia nominal bore with fittings (medium grade weight 1.27
kg/mtr) B class including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
13.2 KSRB13-1.2 : Providing and fixing to wall, ceiling and floor galvanised / mild M
steel tube 20mm dia nominal bore with fittings (medium grade weight 1.65
kg/mtr) B class including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
13.3 KSRB13-1.3 : Providing and fixing to wall, ceiling and floor galvanised / mild M
steel tube 25mm dia nominal bore with fittings (medium grade weight
2.51kg/mtr) B class including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
13.4 KSRB13-1.4 : Providing and fixing to wall, ceiling and floor galvanised / mild M
steel tube 32mm dia nominal bore with fittings (medium grade weight
3.23kg/mtr) B class including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
13.5 KSRB13-1.5 : Providing and fixing to wall, ceiling and floor galvanised / mild M
steel tube 40mm dia nominal bore with fittings (medium grade weight 3.72
kg/mtr) B class including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
13.6 KSRB13-1.6 : Providing and fixing to wall, ceiling and floor galvanised / mild M
steel tube 50mm dia nominal bore with fittings (medium grade weight
5.24kg/mtr) B class including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.14 / 13.8
13.7 KSRB13-2.1 : Extra for concealed pipe including painting with anticorrosive M
bitumastic paint cutting chases, making good the concrete surface, and plaster
for 15mm dia nominal bore including cost of all materials, labour charges,
HOM equipment complete as per specifications. Specification No.KBS

13.8 KSRB13-2.2 : Extra for concealed pipe including painting with anticorrosive M
bitumastic paint cutting chases making good the concrete surface and plaster
for 20mm dia nominal bore including cost of all materials, labour and HOM
equipment complete as per specifications. Specification No.KBS

13.9 KSRB13-2.3 : Extra for concealed pipe including painting with anticorrosive M
bitumastic paint, cutting chases making good the concrete surface and plaster
for 25mm dia nominal bore including cost of all materials, labour and HOM
equipment complete as per specifications. Specification No.KBS

13.10 KSRB13-3.1: Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 15mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.11 KSRB13-3.2 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 20mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.12 KSRB13-3.3 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 25mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.13 KSRB13-3.4 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 32mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.14 KSRB13-3.5 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 40mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.15 KSRB13-3.6 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 50mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.16 KSRB13-3.7 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 65mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.17 KSRB13-3.8 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 80mm dia nominal bore with all fittings ( earth work in trenches
to be measured and paid for separately ) including cost of all materials, labour
charges, HOM of equipments and testing complete as per specifications.
Specification No.KBS 13.2.14 / 13.6
13.18 KSRB13-3.9 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 100mm dia nominal bore with all fittings ( earth work in
trenches to be measured and paid for separately ) including cost of all
materials, labour charges, HOM of equipments and testing complete as per
specifications. Specification No.KBS 13.2.14 / 13.6
13.19 KSRB13-3.10 : Providing and fixing in trenches galvanised / mild steel tubes M
(medium grade) 150mm dia nominal bore with all fittings ( earth work in
trenches to be measured and paid for separately ) including cost of all
materials, labour charges, HOM of equipments and testing complete as per
specifications. Specification No.KBS 13.2.14 / 13.6
13.20 KSRB13-4.1 : Making connection of G.I distribution branch with G.I main of 25 Nos
to 40mm. nominal bore, including cutting and threading the pipes, providing
and fixing Tee, nuts, labour for all item of works, testing and HOM of
equipments complete as per specifications. Specification No.KBS 13.10

13.21 KSRB13-4.2 : Making connection of G.I distribution branch with G.I main of 50 Nos
to 85mm. and 100 to 150 nominal bore, including cutting and threading the
pipes, providing and fixing Tee, nuts, labour for all item of works, testing and
HOM of equipments complete as per specifications. Specification No.KBS
13.10
13.22 KSRB13-5 : Providing and fixing water meter with stop cock, jam nut, socket in Set
G.I pipe line including cutting and threading the pipe and making long screws
including cost of all materials, labour, HOM of equipments and testing
complete as per specifications. Specification No.KBS 13.2.19 / 13.16
13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib cock of approved Each
quality 15mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.24 KSRB13-6.1-2 : Providing and fixing in position brass bib cock of approved Each
quality 20mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.25 KSRB13-6.1-3 : Providing and fixing in position brass bib cock of approved Each
quality 25mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.26 KSRB13-6.2-1 : Providing and fixing in position brass stop cock of approved Each
quality 15mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.27 KSRB13-6.2-2 : Providing and fixing in position brass stop cock of approved Each
quality 20mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.28 KSRB13-6.2-3 : Providing and fixing in position brass stop cock of approved Each
quality 25mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.29 KSRB13-6.2-4 : Providing and fixing in position brass stop cock of approved Each
quality 32mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.30 KSRB13-6.2-5 : Providing and fixing in position brass stop cock of approved Each
quality 40mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.31 KSRB13-6.2-6 : Providing and fixing in position brass stop cock of approved Each
quality 50mm nominal bore including cost of all materials, labour and HOM of
equipments with all leads complete as per specifications. Specification No.KBS
13.2.2 / 13.3
13.32 KSRB13-6.3-1 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 15mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.33 KSRB13-6.3-2 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 20mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.34 KSRB13-6.3-3 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 25mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.35 KSRB13-6.3-4 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 32mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.36 KSRB13-6.3-5 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 40mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.37 KSRB13-6.3-6 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 50mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.38 KSRB13-6.3-7 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 65mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.39 KSRB13-6.3-8 : Providing and fixing in position brass gate valve with C.I wheel Each
of approved quality ( screwed end ) 80mm nominal bore including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.6 / 13.3
13.40 KSRB13-6.4-1 : Providing and fixing in position brass ball valve high or low Each
pressure with plastic float of approved quality 15mm nominal bore including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.41 KSRB13-6.4-2 : Providing and fixing in position brass ball valve high or low Each
pressure with plastic float of approved quality 20mm nominal bore including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.42 KSRB13-6.4-3 : Providing and fixing in position brass ball valve high or low Each
pressure with plastic float of approved quality 25mm nominal bore including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.43 KSRB13-6.5-1 : Providing and fixing in position 15mm nominal bore brass Each
ferrule with C.I mouth cover including boring and tapping the main, cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.3 / 13.14
13.44 KSRB13-6.5-2 : Providing and fixing in position 20mm nominal bore brass Each
ferrule with C.I mouth cover including boring and tapping the main, cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.3 / 13.14
13.45 KSRB13-6.5-3 : Providing and fixing in position 25mm nominal bore brass Each
ferrule with C.I mouth cover including boring and tapping the main, cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.3 / 13.14
13.46 KSRB13-6.6-1 : Providing and fixing unplasticised PVC connection pipe with Set
brass union 15mm nominal bore 300 mm length of PVC connection including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.47 KSRB13-6.6-2 : Providing and fixing unplasticised PVC connection pipe with Set
brass union 15mm nominal bore 450mm length of PVC connection including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.48 KSRB13-6.6-3 : Providing and fixing unplasticised PVC connection pipe with Set
brass union 20mm nominal bore 300 mm length of PVC connection including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.49 KSRB13-6.6-4 : Providing and fixing unplasticised PVC connection pipe with Set
brass union 20mm nominal bore 450mm length of PVC connection including
cost of all materials, labour and HOM of equipments with all leads complete as
per specifications. Specification No.KBS
13.50 KSRB13-6.7-1 : Providing and fixing in position chromium plated brass shower Each
rose with 15 or 20mm inlet 100mm dia including cost of all materials, labour
and HOM of equipments with all leads complete as per specifications.
Specification No.KBS 13.2.16 / 13.3
13.51 KSRB13-6.7-2 : Providing and fixing in position chromium plated brass shower Each
rose with 15 or 20mm inlet 150mm dia including cost of all materials, labour
and HOM of equipments with all leads complete as per specifications.
Specification No.KBS 13.2.16 / 13.3
13.52 KSRB13-7.1-1 : Providing and fixing in position 25mm nominal bore gun metal Nos
non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.53 KSRB13-7.1-2 : Providing and fixing in position 32mm nominal bore gun metal Nos
non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.54 KSRB13-7.1-3 : Providing and fixing in position 40mm nominal bore gun metal Each
non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.55 KSRB13-7.1-4 : Providing and fixing in position 50mm nominal bore gun metal Nos
non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.56 KSRB13-7.1-5 : Providing and fixing in position 65mm nominal bore gun metal Nos
non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.57 KSRB13-7.1-6 : Providing and fixing in position 80mm nominal bore gun metal Nos
non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.58 KSRB13-7.1-7 : Providing and fixing in position 100mm nominal bore gun Nos
metal non-return valve horizontal type of approved make including cost of all
materials, labour and HOM of equipments with all leads complete as per
specifications. Specification No.KBS 13.2.10 / 13.13
13.59 KSRB13-7.2-1 : Providing and fixing in position 25mm nominal bore non-return Nos
valve vertical type of approved make including cost of all materials, labour and
HOM of equipments with all leads complete as per specifications. Specification
No.KBS 13.2.10 / 13.13
13.60 KSRB13-7.2-2 : Providing and fixing in position 32mm nominal bore non-return Nos
valve vertical type of approved make including cost of all materials, labour and
HOM of equipments with all leads complete as per specifications. Specification
No.KBS 13.2.10 / 13.13
13.61 KSRB13-7.2-3 : Providing and fixing in position 40mm nominal bore non-return Nos
valve vertical type of approved make including cost of all materials, labour and
HOM of equipments with all leads complete as per specifications. Specification
No.KBS 13.2.10 / 13.13
13.62 KSRB13-7.2-4 : Providing and fixing in position 50mm nominal bore non-return Nos
valve vertical type of approved make including cost of all materials, labour and
HOM of equipments with all leads complete as per specifications. Specification
No.KBS 13.2.10 / 13.13
13.63 KSRB13-7.2-5 : Providing and fixing in position 65mm nominal bore non-return Nos
valve vertical type of approved make including cost of all materials, labour and
HOM of equipments with all leads complete as per specifications. Specification
No.KBS 13.2.10 / 13.13
13.64 KSRB13-7.2-6 : Providing and fixing in position 80mm nominal bore non-return Nos
valve vertical type of approved make including cost of all materials, labour and
HOM of equipments with all leads complete as per specifications. Specification
No.KBS 13.2.10 / 13.13
13.65 KSRB13-7.2-7 : Providing and fixing in position 100mm nominal bore non- Nos
return valve vertical type of approved make including cost of all materials,
labour and HOM of equipments with all leads complete as per specifications.
Specification No.KBS 13.2.10 / 13.13
13.66 KSRB13-8.1 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 20mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.67 KSRB13-8.2 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 25mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.68 KSRB13-8.3 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.69 KSRB13-8.4 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 40mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.70.1 KSRB13-8.5 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 50mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.70.2 KSRB13-8.6 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 63mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.70.3 KSRB13-8.7 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.70.4 KSRB13-8.8 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9
13.70.5 KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.70.6 KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 140mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.70.7 KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 160mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.1 / 13.9

13.71 KSRB13-9.1 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.72 KSRB13-9.2 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 40mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.73.1 KSRB13-9.3 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 50mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.73.2 KSRB13-9.4 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 63mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.73.3 KSRB13-9.5 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.73.4 KSRB13-9.6 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 90mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9
13.73.5 KSRB13-9.7 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.73.6 KSRB13-9.8 : Providing and fixing to wall, ceiling and floor high density M
polyethylene pipes 6.00 kgf/sq.cm working pressure 140mm outside diameter
with special flange, compression type fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.2 / 13.9

13.74 KSRB13-10.1 : Providing and fixing to wall, ceiling and floor unplasticised PVC M
pipes 10.00 kgf/sq.cm working pressure 16mm outside diameter chemp plast /
Wavin or equivalent make with pipe fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.4 / 13.9

13.75 KSRB13-10.2 : Providing and fixing to wall, ceiling and floor unplasticised PVC M
pipes 10.00 kgf/sq.cm working pressure 20mm outside diameter chemp plast /
Wavin or equivalent make with pipe fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.4 / 13.9

13.76 KSRB13-10.3 : Providing and fixing to wall, ceiling and floor unplasticised PVC M
pipes 10.00 kgf/sq.cm working pressure 25mm outside diameter chemp plast /
Wavin or equivalent make with pipe fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.4 / 13.9

13.77 KSRB13-10.4 : Providing and fixing to wall, ceiling and floor unplasticised PVC M
pipes 10.00 kgf/sq.cm working pressure 32mm outside diameter chemp plast /
Wavin or equivalent make with pipe fittings, wall clips, making good the wall,
ceiling and floor, including cost of all materials, labour charges, HOM of
equipments and testing complete as per specifications. Specification No.KBS
13.2.15.4 / 13.9

13.78 KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage Nos
tanks with manhole lid and suitable locking arrangements, making holes of
suitable diameter for inlet, outlet and over flow pipes, including cost of all
materials, labour, transport charges, HOM of equipments and testing complete
as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22

13.79.1 Providing and fixing gun metal wheel valve conforming to IS specification of Each
approved make as per directions including all lead and lift etc., complete. - for
15mm dia:
13.79.2 Providing and fixing gun metal wheel valve conforming to IS specification of Each
approved make as per directions including all lead and lift etc., complete.- for
20mm dia:
13.79.3 Providing and fixing gun metal wheel valve conforming to IS specification of Each
approved make as per directions including all lead and lift etc., complete.- for
25mm dia:
13.79.4 Providing and fixing gun metal wheel valve conforming to IS specification of Each
approved make as per directions including all lead and lift etc., complete.- for
32mm dia:
13.79.5 Providing and fixing gun metal wheel valve conforming to IS specification of Each
approved make as per directions including all lead and lift etc., complete.- for
40mm dia:
13.79.6 Providing and fixing gun metal wheel valve conforming to IS specification of Each
approved make as per directions including all lead and lift etc., complete.- for
50mm dia:
13.80 Providing gun metal pillar cocks 15mm dia of I class conforming to ISI Each
specifications and fixing them in position as per directions including of cost of
materials and fixtures and conveyance to spot.
13.81.1 Providing NP/CP waste unions conforming to ISI specifications and fixing them Each
in position as per directions including cost of materials, fixtures and
conveyance to work spot etc., complete. - for 32mm dia
13.81.2 Providing NP/CP waste unions conforming to ISI specifications and fixing them Each
in position as per directions including cost of materials, fixtures and
conveyance to work spot etc., complete.- for 40mm dia:
13.81.3 Providing NP/CP waste unions conforming to ISI specifications and fixing them Each
in position as per directions including cost of materials, fixtures and
conveyance to work spot etc., complete.- for 50mm dia:
13.82.1 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M
Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 meter spacing, cutting &
making good the walls etc., including testing complete as required. (Internal
work) Pipes exposed on wall - 1216(16 mm OD) Pipe

13.82.2 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 meter spacing, cutting &
making good the walls etc., including testing complete as required. (Internal
work) Pipes exposed on wall - 1620(20mm OD) pipe

13.82.3 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 meter spacing, cutting &
making good the walls etc., including testing complete as required. (Internal
work) Pipes exposed on wall - 2025(25mm OD) pipe

13.82.4 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 meter spacing, cutting &
making good the walls etc., including testing complete as required. (Internal
work) Pipes exposed on wall - 2532(32mm OD) pipe
13.82.5 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M
Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 meter spacing, cutting &
making good the walls etc., including testing complete as required. (Internal
work) Pipes exposed on wall - 3240 (40mm OD) pipe

13.82.6 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc., with clamps at 1.00 meter spacing, cutting &
making good the walls etc., including testing complete as required. (Internal
work) Pipes exposed on wall - 4050 (50mm OD) pipe

13.83.1 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with cement tacking at 1.00 meter spacing, and
every fitting, cutting & making good the walls etc., including testing complete
as required. (Internal work) Concealed piping with cutting chases & making
good walls etc., - 1216(16 mm OD) Pipe

13.83.2 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with cement tacking at 1.00 meter spacing, and
every fitting, cutting & making good the walls etc., including testing complete
as required. (Internal work) Concealed piping with cutting chases & making
good walls etc., - 1620(20mm OD) pipe

13.83.3 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with cement tacking at 1.00 meter spacing, and
every fitting, cutting & making good the walls etc., including testing complete
as required. (Internal work) Concealed piping with cutting chases & making
good walls etc., - 2025(25mm OD) pipe
13.83.4 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M
Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with cement tacking at 1.00 meter spacing, and
every fitting, cutting & making good the walls etc., including testing complete
as required. (Internal work) Concealed piping with cutting chases & making
good walls etc., - 2532(32mm OD) pipe

13.83.5 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with cement tacking at 1.00 meter spacing, and
every fitting, cutting & making good the walls etc., including testing complete
as required. (Internal work) Concealed piping with cutting chases & making
good walls etc., - 3240 (40mm OD) pipe

13.83.6 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with cement tacking at 1.00 meter spacing, and
every fitting, cutting & making good the walls etc., including testing complete
as required. (Internal work) Concealed piping with cutting chases & making
good walls etc., - 4050 (50mm OD) pipe

13.84.1 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL- PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with tranching & refilling upto 1.00 meter depth
including testing complete as required. (External work) Pipe in trenches
including excavation & refilling etc., - 1216 (16mm OD) pipe

13.84.2 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL- PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with tranching & refilling upto 1.00 meter depth
including testing complete as required. (External work) Pipe in trenches
including excavation & refilling etc., - 1620(20mm OD) pipe

13.84.3 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL- PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with tranching & refilling upto 1.00 meter depth
including testing complete as required. (External work) Pipe in trenches
including excavation & refilling etc., - 2025 (25mm OD) pipe
13.84.4 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL- PE) M
Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with tranching & refilling upto 1.00 meter depth
including testing complete as required. (External work) Pipe in trenches
including excavation & refilling etc., - 2532 (32mm OD) pipe

13.84.5 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL- PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with tranching & refilling upto 1.00 meter depth
including testing complete as required. (External work) Pipe in trenches
including excavation & refilling etc., - 3240 (40mm OD) pipe

13.84.6 Providing & fixing Polyethelene-Aluminium-Polyethelene (PE-AL- PE) M

Composite Pressure Pipes conforming to IS 15450 duly “ISI” marked, U.V.
stabalized with Carbon black for hot & cold water supply, capable to withstand
temperature upto 80°C including all special composite fittings (engineering
plastic blend and brass inserts wherever required.) e.g. elbows, tees, reducers,
couplers & connectors etc. with tranching & refilling upto 1.00 meter depth
including testing complete as required. (External work) Pipe in trenches
including excavation & refilling etc., - 4050 (50mm OD) pipe

13.85.1 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement and testing of joints complete. (internal work exposed
on wall) - 15mm nominal OD pipes

13.85.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement and testing of joints complete. (internal work exposed
on wall) - 20mm nominal OD pipes

13.85.3 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement and testing of joints complete. (internal work exposed
on wall) - 25mm nominal OD pipes

13.85.4 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement and testing of joints complete. (internal work exposed
on wall) - 32mm nominal OD pipes

13.85.5 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement and testing of joints complete. (internal work exposed
on wall) - 40mm nominal OD pipes
13.85.6 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement and testing of joints complete. (internal work exposed
on wall) - 50mm nominal OD pipes

13.86.1 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement & the cost of cutting chases & making good the same
including testing of joints complete. (Concealed work including cutting chases
and good the walls etc.) - 15mm nominal OD pipes

13.86.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement & the cost of cutting chases & making good the same
including testing of joints complete. (Concealed work including cutting chases
and good the walls etc.) - 20mm nominal OD pipes

13.86.3 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement & the cost of cutting chases & making good the same
including testing of joints complete. (Concealed work including cutting chases
and good the walls etc.) - 25mm nominal OD pipes

13.86.4 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778, having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings including fixing the pipe with clamp at
1.00 mtr spacing. This includes jointing of pipes and fittings with one step
CPVC solvent cement & the cost of cutting chases & making good the same
including testing of joints complete. (Concealed work including cutting chases
and good the walls etc.) - 32mm nominal OD pipes

13.87.1 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 15mm nominal OD pipes

13.87.2 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 20mm nominal OD pipes

13.87.3 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 25mm nominal OD pipes
13.87.4 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 32mm nominal OD pipes

13.87.5 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 40mm nominal OD pipes

13.87.6 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 50mm nominal OD pipes

13.87.7 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 62.50mm nominal OD pipes

13.87.8 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 75mm nominal OD pipes

13.87.9 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 100mm nominal OD pipes

13.87.10 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming M
to IS 15778 having thermal stability for hot and cold water supply including all
CPVC plain and brass threaded fittings, this includes jointing of pipes and
fittings with one step solvent cement, trenching, refilling & testing of joints
complete. (external work). - 150mm nominal OD pipes

13.88 Providing and fixing polished granite sink of size 60cms x 90cms of 23cm thick, Each
the sink portion shall be 15cm in depth of shapes oval / round / square over
brick masonry in cement mortar 1:6 including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and lift,
loading and unloading, transportation charges and all other incidental charges
etc., complete as per specification and directions of the Engineer-in-charge of
the work.

13.89 Providing and fixing polished granite sink of size 60cms x 75cms of 23cm thick, Each
the sink portion shall be 15cm in depth of shapes oval / round / square over
brick masonry in cement mortar 1:6 including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and lift,
loading and unloading, transportation charges and all other incidental charges
etc., complete as per specification and directions of the Engineer-in-charge of
the work.
13.90 Providing and fixing polished granite sink of size 60cms x 60cms of 23cm thick, Each
the sink portion shall be 15cm in depth of shapes oval / round / square over
brick masonry in cement mortar 1:6 including cost and conveyance of all
materials, labour for all items of work, HOM of equipment with all lead and lift,
loading and unloading, transportation charges and all other incidental charges
etc., complete as per specification and directions of the Engineer-in-charge of
the work.

13.91 Providing and Fixing Stainless Steelsink of sizes upto 40cms x 47cms in 20mm Each
thick granite slab of by cutting required thickness and width of grooves and
fixing using adhesives etc., complete including cost and conveyance of all
materials, labour for all items of work, HOM with all lead and lift, loading and
unloading, transportation charges and all other incidental charges etc.,
complete as per specification and directions of the Engineer-in-charge of the
work.

13.92.1 Cutting granite slab upto 40mm thick and required width of grooves for fixing No
Stainless steel sink upto 60cm x 45 cms and fixing using adhesives.
13.92.2 Cutting granite slab upto 40mm thick and required width of grooves for fixing No
Stainless steel sink above 60cm x 45 cms and fixing using adhesives.

13.93.1 Providing and fixing concealed UVstabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings incluiding
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for concealed fitting - 20mm pipe outer dia (3 layer)

13.93.2 Providing and fixing concealed UVstabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings incluiding
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for concealed fitting - 25mm pipe outer dia (3 layer)

13.93.3 Providing and fixing concealed UVstabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings incluiding
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for concealed fitting - 32mm pipe outer dia (3 layer)

13.94.1 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 compete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for exposed on wall - 20mm pipe outer dia (3 layer)

13.94.2 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 compete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for exposed on wall - 25mm pipe outer dia (3 layer)

13.94.3 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 compete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for exposed on wall - 32mm pipe outer dia (3 layer)

13.94.4 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 compete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for exposed on wall - 40mm pipe outer dia (3 layer)
13.94.5 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 compete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
Internal Plumbing - for exposed on wall - 50mm pipe outer dia (3 layer)

13.95.1 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 20mm pipe outer dia (3 layer)
13.95.2 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing -25mm pipe outer dia (3 layer)
13.95.3 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 32mm pipe outer dia (3 layer)
13.95.4 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 40mm pipe outer dia (3 layer)
13.95.5 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 50mm pipe outer dia (3 layer)
13.95.6 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 63mm pipe outer dia (3 layer)
13.95.7 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 75mm pipe outer dia (3 layer)
13.95.8 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 90mm pipe outer dia (3 layer)
13.95.9 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 110mm pipe outer dia (3 layer)
13.95.10 Providing and fixing concealed UV stabilised and antimicrobial fusion 3 layer M
PP-R pipes confirming to DIN 8077 complete with PP-R plain fittings including
brass threaded polypropelene random fittings including chasing the walls.
External plumbing - 160mm pipe outer dia (3 layer)
Basic Rate
203.00

240.00

311.00

361.00

447.00

512.00

159.00

159.00

159.00

144.00

177.00
 250.00

283.00

356.00

388.00

596.00

750.00

1,001.00

1,494.00

483.00

879.00

1,320.00
 190.00

173.00

236.00

141.00

141.00

139.00

139.00

140.00

138.00

272.00

336.00

449.00

830.00

1,040.00
1,739.00

2,103.00

2,221.00

343.00

359.00

513.00

161.00

209.00

241.00

234.00

264.00

242.00

246.00

707.00
 750.00

587.00

740.00

947.00

1,330.00

1,728.00

2,143.00

2,403.00

475.00

747.00

903.00

1,269.00

1,579.00

1,929.00
2,198.00

107.00

129.00

190.00

228.00

261.00

297.00

326.00

380.00
450.00

556.00

627.00

235.00

262.00

328.00

372.00

425.00

498.00
 595.00

741.00

107.00

107.00

118.00

129.00

6,828.00

395.00

414.00

447.00

486.00

562.00
734.00

242.00

120.00

160.00

210.00

179.00

214.00

254.00

357.00
510.00

589.00

265.00

305.00

350.00
466.00

648.00

751.00

171.00

198.00

229.00
316.00

448.00

527.00

130.00

157.00

196.00

254.00

337.00
465.00

206.00

235.00

293.00

374.00

126.00

146.00

179.00
 226.00

292.00

432.00

1,410.00

1,800.00

2,450.00

4,250.00

6,563.00

5,574.00
4,586.00

5,437.00

1,047.00

1,570.00

210.00

260.00

330.00

140.00

180.00

250.00

350.00
 500.00

130.00

180.00

220.00

300.00

550.00

670.00

800.00

1,200.00

1,320.00

2,260.00
Item No. Description Unit
14.1 KSRB 14.1 : Providing and laying flooring with burnt stone slabs 10 cms thick, Sqm
rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with
cement mortar 1:3, , including cost of materials, labour, curing complete as per
specifications. Specification No. KBS 14.26
14.2 KSRB 14.2 : Providing and laying flooring with burnt stone slabs 10 cms thick Sqm
rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed
with cement mortar 1:3, , including cost of materials, labour, curing complete
as per specifications. Specification No. KBS 14.26
14.3 KSRB 14.3 : Providing and laying flooring and steps machine cut granite slabs Sqm
40mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement
mortar 1:3 over existing cement concrete bed , including cost of materials,
labour, curing complete as per specifications. Specification No. KBS 14.26

14.4 KSRB 14.4 : Providing and laying flooring and steps fine dressed granite stone Sqm
slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with
cement mortar 1:3 over existing cement concrete bed , including cost of
materials, labour, curing complete as per specifications. Specification No. KBS
14.26
14.5 KSRB 14.5 : Providing and laying flooring and steps fine machine polished Sqm
granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and
joints finished with cement mortar 1:3 over existing cement concrete bed ,
including cost of materials, labour, curing complete as per specifications.
Specification No. KBS 14.26
14.6 KSRB 14.6-1: Providing and laying heavy duty cobble stones 60mm thick Sqm
interlock pavers, using cement and course sand for manufacture of blocks of
approved size, shape and colour with a minimum compressive strength of 281
kg per sqm over 50mm thick sand bed (average thickness ) and compacting
with plate vibrator having 3 tons compaction force thereby forcing part of sand
underneath to come up in between joints, final compaction of paver surface
joints into its final level, including cost of materials, labour and HOM of
machineries complete as per specifications. Specification No. KBS

14.7 KSRB 14.6-2 :Providing and laying heavy duty cobble stones 75mm thick Sqm
interlock pavers, using cement and course sand for manufacture of blocks of
approved size, shape and colour with a minimum compressive strength of 281
kg per sqm over 50mm thick sand bed (average thickness ) and compacting
with plate vibrator having 3 tons compaction force thereby forcing part of sand
underneath to come up in between joints, final compaction of paver surface
joints into its final level, including cost of materials, labour and HOM of
machineries complete as per specifications. Specification No. KBS

14.8 KSRB 14.7-1: Providing and laying flooring with M15 cement concrete 40 mm Sqm
thick using broken granite 20mm and down size laid to line and level in one
layer and finish with a floating coat of neat cement , including cost of materials,
labour, curing, complete as per specifications. Specification No. KBS 14.3

14.9 KSRB 14.7-2 : Providing and laying red oxide flooring 40 mm thick, with an Sqm
under layer of 30mm thick M-15 cement concrete, using broken granite metal
of 12.5mm nominal size and top layer of 10mm thick plaster with 1:3 cement
mortar mixed with red oxide ( using 3.5 kg of red oxide per 50 kg of cement )
finished with floating coat of neat cement mixed with red oxide ( mix of same
proportion ) , including cost of materials, labour, curing, complete as per
specifications. Specification No. KBS 14.3
14.10 KSRB 14.7-3 : Providing and laying flooring 40 mm thick, with an under layer Sqm
of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm
nominal size and top layer of 10mm thick plaster with cement mortar 1:3,
finished with floating coat of neat cement , including cost of materials, labour,
curing, complete as per specifications. Specification No. KBS 14.3

14.11 KSRB 14.7-4 : Extra for making chequers of approved pattern on cement Sqm
concrete floor, steps, landings, pavements , including cost of labour complete
as per specifications. Specification No. KBS
14.12 KSRB 14.8-1: Providing and laying linolium covering to floors plain or coloured Sqm
3.2mm thick sheet / tiles laid with an approved adhesive on sub floor
stretching, cutting and fixing complete , including cost of materials, labour,
complete as per specifications. Specification No. KBS 14.37.7
14.13 KSRB 14.9-1: Providing and laying M-15 cement concrete flooring, 50 mm Sqm
thick with metallic concrete hardner toping, under layer of 35mm thick m-15
cement concrete using broken granite metal of 20mm and down size, and top
layer 50mm thick of metallic cement hardner consisting of mix 1:2 ( 1 cement
hardner mix : 2 granite metal 10mm nominal size ) by volume, with which
metallic hardening compound of approved quality mix in the ratio of 4:1 ( 4 part
of cement and 1 part of metallic floor hardening compound of approved quality
by wt) , including finishing cost of materials, labour, curing, complete as per
specifications Specification No. KBS 14.4

14.14 KSRB 14.9-2 : Providing and laying M-15 cement concrete flooring 60 mm Sqm
thick with metallic concrete hardner toping, under layer of 45mm thick M-15
cement concrete using broken granite metal of 20mm and down size and top
layer of 15mm thick metallic cement hardner consisting of mix 1:2 ( 1 cement
hardner mix : 2 granite metal 10mm nominal size ) by volume, with metalic
hardening compound of approved quality mix in the ratio of 4:1 ( 4 part of
cement = 1 part of metallic floor hardening compound of approved quality by
wt ) , including finishing, cost of materials, labour, curing, complete as per
specifications. Specification No. KBS 14.4

14.15 KSRB 14.10-1: Flooring with 25mm to 40mm thick polished tandur blue stone Sqm
slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed
or top of roof laid to line and level and jointed with cement slurry mixed with
pigment to match the shade of the slab, , including cost of materials, labour,
curing, polishing complete as per specifications. Specification No. KBS

14.16 KSRB 14.10-2: Flooring with 25mm to 40mm thick polished shahabad slabs Sqm
using cement mortar 1:6, 25mm thick over existing cement concrete bed or top
of roof laid to line and level and jointed with cement slurry mixed with pigment
to match the shade of the slab, , including cost of materials, labour, curing,
polishing complete as per specifications. Specification No. KBS

14.17 KSRB 14.10-3: Providing flooring with 25mm to 40mm thick polished Cadapa Sqm
slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed
or top of roof laid to line and level and jointed with cement slurry mixed with
pigment to match the shade of the slab, including cost of materials, labour,
curing, polishing complete as per specifications. Specification No. KBS
14.18 KSRB 14.11-1: Providing mosaic flooring with cast-in-situ 40mm thick using Sqm
marble chips flooring rubbed and polished to granolithic finish with under layer
of 28mm thick cement concrete M-15 with stone aggregate 12mm and down
size, and top layer 12mm thick with dark shade pigment with ordinary cement
in top layer only using white, black, chacolate, yellow or baroda green marble
chips of size from 7 to 10 nominal size laid in cement marble powder mix 3:1
( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4 cement
marble powder mix : 7 marble chips by volume ) curing polishing oxalic acid
wash, wax polish , including cost of materials, labour, complete as per
specifications. Specification No. KBS 14.8

14.19 KSRB 14.11-2 : Providing mosaic flooring with cast-in-situ 40mm thick using Sqm
marble chips flooring, rubbed and polished to granolithic finish with under layer
of 28mm thick cement cocrete M-15 with stone aggregate 12mm and down
size , and top layer 12mm thick with light shade pigment with white cement in
top layer only using white, black, chacolate, yellow or baroda green marble
chips of size from 7 to 10 nominal size laid in cement marble stone mixed 3:1
( 3 cement : 1 marble powder by weight ) in proportion of 4:7 ( 4 cement
marble powder mix : 7 marble chips by volume ) curing polishing oxalic acid
wash, wax polish , including cost of materials, labour, complete as per
specifications. Specification No. KBS 14.8

14.20 KSRB 14.11-3 : Providing mosaic flooring with cast-in-situ 40mm thick using Sqm
marble chips flooring rubbed and polished to granolithic finish with under layer
of 28mm thick cement cocrete M-15 with stone aggregate 12mm and down
size, and top layer 12mm thick with medium shade pigment with approximately
50% white cement and 50% ordinary cement in top layer only using white,
black, chacolate, yellow or baroda green marble chips of size from 7 to 10
nominal size laid in cement marble stone mixed 3:1 ( 3 cement : 1 marble
powder by weight ) in proportion of 4:7 ( 4 cement marble powder mix : 7
marble chips by volume ) curing polishing oxalic acid wash, wax polishing,
including cost of materials, labour, complete as per specifications. Specification
No. KBS 14.8

14.21 KSRB 14.11-4 : Providing mosaic flooring with cast-in-situ 40mm thick using Sqm
marble chips and polished to granolithic finish with under layer of 28mm thick
cement concrete M-15 with stone aggregate 12mm and down size , and top
layer 12mm thick with white cement without any pigment in top layer only using
white, black, chacolate, yellow or baroda green marble chips of size from 7 to
10 nominal size laid in cement marble powder mix 3:1 ( 3 cement : 1 marble
powder by weight ) in proportion of 4:7 ( 4 cement marble powder mix : 7
marble chips by volume ) curing, polishing oxalic acid wash, wax polish ,
including cost of materials, labour, complete as per specifications. Specification
No. KBS 14.8

14.22 KSRB 14.11-5 :Extra for providing and fixing aluminium strips 40 mm wide and M
1.5mm thick painted with a protective coat of bitumen for joints of mosaic
floors, including cost of materials, labour, curing, complete as per
specifications. Specification No. KBS
14.23 KSRB 14.11-6 :Extra for providing and fixing glass strips 40 mm wide and 4mm M
thick for joints of mosaic floors , including cost of materials, labour, curing,
complete as per specifications. Specification No. KBS
14.24 KSRB 14.12-1: Providing mosaic tiles flooring with precast grey colour mosaic Sqm
tiles 20mm thick using marble chips of approved colour 7 to 10 nominal size
laid in floors and landings on a bed of 25mm thick cement mortar 1:6, mix,
jointed with neat cement slurry mix with pigment to match the shade of tiles
curing, rubbing, polishing, oxalic acid wash, wax polish , including cost of
materials, labour, HOM of machinary complete as per specifications.
Specification No. KBS 14.11
14.25 KSRB 14.12-2: Providing mosaic tiles flooring with precast light shade pigment Sqm
with white cement mosaic tiles 20mm thick using marble chips of approved
colour 7 to 10 nominal size laid in floors and landings on a bed of 25mm thick
cement mortar 1:6, mix, jointed with neat cement slurry mix with pigment to
match the shade of tiles, curing. rubbing, polishing, oxalic acid wash, wax
polish, including cost of materials, labour, HOM of machinary complete as per
specifications. Specification No. KBS 14.11

14.26 KSRB 14.12-3 : Providing mosaic tiles flooring with precast medium shade Sqm
pigment using 50% white cement and 50% ordinary cement mosaic tiles 20mm
thick using marble chips of approved colour 7 to 10 nominal size laid in floors
and landings on a bed of 25mm thick average thickness of cement mortar 1:6,
mix, jointed with neat cement slurry mix with pigment to match the shade of
tiles, curing, rubbing, polishing, oxalic acid wash, wax polish , including cost of
materials, labour, HOM of machinary complete as per specifications.

14.27 KSRB 14.12-4 : Providing mosaic tiles flooring with white precast cement Sqm
mosaic tiles 20mm thick using marble chips of 7 to 10 nominal size laid in
floors and landings on a bed of 25mm thick average thickness of cement
mortar 1:6, mix, jointed with neat cement slurry mix with pigment to match the
shade of tiles, curing, rubbing, polishing, oxalic acid wash, wax polish ,
including cost of materials, labour, HOM of machinary complete as per
specifications.

14.28 KSRB 14.13-1: Providing precast chequered mosaic tiles dark shade using Sqm
ordinary grey cement for steps and flooring, with precast 20mm thick, using
marble chips of 7 to 10 nominal size laid in floors, steps and landings on a bed
of 12mm thick cement mortar 1:3 mix, and jointed with neat cement slurry
mixed with pigment to match the shade of tiles, curing, rubbing, polishing,
oxalic acid wash, wax polish , including cost of materials, labour, complete as
per specifications.

14.29 KSRB 14.13-2: Providing precast chequered mosaic tiles light shade using Sqm
white cement for steps and flooring, 20mm thick, using marble chips of 7 to 10
nominal size laid in floors, steps and landings on a bed of 12mm thick cement
mortar 1:3 mix, and jointed with neat cement slurry mixed with pigment to
match the shade of tiles curing, rubbing, polishing, oxalic acid wash, wax
polish , including cost of materials, labour, complete as per specifications.
Specification No. KBS 14.13, 14.14

14.30 KSRB 14.13-3: Providing precast chequered mosaic tiles medium shade Sqm
pigment using 50% white cement and 50% ordinary cement for steps and
flooring 20mm thick using marble chips of 7 to 10 nominal size laid on a bed of
12mm thick cement mortar 1:3 mix, and jointed with neat cement slurry mixed
with pigment to match the shade of tiles curing, rubbing, polishing, oxalic acid
wash, wax polish , including cost of materials, labour, complete as per
specifications. Specification No. KBS 14.13, 14.14

14.31 KSRB 14.13-4: Providing precast chequered mosaic tiles white colour for steps Sqm
and flooring, 20mm thick, using marble chips of 7 to 10 nominal size laid on a
bed of 12mm thick cement mortar 1:3 mix, and jointed with neat cement slurry
mixed with pigment to match the shade of tiles rubbing, polishing, oxalic acid
wash, wax polish, including cost of materials, labour, curing, complete as per
specifications. Specification No. KBS 14.13, 14.14

14.36.1 KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for Sqm
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix, flush pointing with white cement using colour pigment ,
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic Tiles of size 15x15cms 6mm thick
14.36.2 KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for Sqm
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix, flush pointing with white cement using colour pigment ,
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic Tiles of size 30x30cms 6mm thick
14.36.3 KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for Sqm
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix, flush pointing with white cement using colour pigment ,
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic Tiles 400 x 400mm on a bed of 20mm thick
14.36.4 KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for Sqm
flooring, treads of steps and landings laid on a bed of 12mm thick, cement
mortar 1:3 mix, flush pointing with white cement using colour pigment ,
including cost of materials, labour, curing, complete as per specifications. - for
Ceramic tiles 30cm x 60cm 6mm thick on a bed of 20mm thick

14.37 KSRB 14.15-1: Providing marble slab flooring 20mm thick with edges of slab Sqm
machine cut, for flooring, treads of steps and landings laid on a bed of 25mm
thick cement mortar 1:6, mix, to line and level, jointed with cement slurry
curing, rubbing, polishing complete finishIing with flush pointing using white
cement, including cost of materials, HOM of machineries, labour, curing,
complete as per specifications. Note : While preparing analysis the quality of
marble slab should be clearly noted namely white marble, adanga marble,
makrana etc., and also size of slab should be noted clearly. Specification No.
KBS 14.18

14.38 KSRB 14-16.1 : Providing skirting upto 30 cms. height with cement mortar 1:3 Sqm
finished with a floating coat of neat cement including rounding off junctions
floor, overall 15 mm thick including cost of materials, labour, complete as per
specifications. Specification No.KBS 14.5
14.39 KSRB 14-16.2 : Providing red oxide skirting upto 30 cms. height with cement Sqm
mortar 1:3 including rounding off junctions with floor, finished overall 15 mm
thick, top portion 5mm thick mixed with red oxide and a floating coat of neat
cement using 3.5kg of red oxide of iron per 50 kg of cement including cost of
materials, labour, complete as per specifications. Specification No.KBS 14.5

14.40 KSRB 14-17.1 : Providing skirting, dado, rises of steps with white glazed tiles Sqm
6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over rough plaster surface ( excluding cost of rough plastered surface
which should be measured and paid separately) using glazed tiles of approved
make and size including cost of materials, labour, complete as per
specifications. Specification No.KBS 14.16, 14.17

14.41.1 KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles Sqm
on 10mm thick cement plaster 1:3 and jointed with white cement slurry over
rough plaster surface ( excluding cost of rough plastered surface which should
be measured and paid separately) using glazed tiles of approved make and
size including cost of materials, labour, complete as per specifications.
Specification No.KBS 14.16, 14.17 - Colour glazed tiles 15x15 cms 6mm thick

14.41.2 KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles Sqm
on 10mm thick cement plaster 1:3 and jointed with white cement slurry over
rough plaster surface ( excluding cost of rough plastered surface which should
be measured and paid separately) using glazed tiles of approved make and
size including cost of materials, labour, complete as per specifications.
Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x60 cms 6mm thick
with border of size 30 x 10 cms
14.41.3 KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles Sqm
on 10mm thick cement plaster 1:3 and jointed with white cement slurry over
rough plaster surface ( excluding cost of rough plastered surface which should
be measured and paid separately) using glazed tiles of approved make and
size including cost of materials, labour, complete as per specifications.
Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x45 cms 6mm thick
with border of size 30 x 10 cms.

14.42 KSRB 14-18.1 : Providing skirting, dado, rises of steps with marble slabs not Sqm
exceeding 30 cms. height on 10 cms. thick cement mortar 1:3 and jointed with
white cement slurry over rough plaster surface (excluding cost of rough
plastered which should be measured and paid separately ) using marble slab
with machine cut edges upto 25cms. thick including cost of materials, labour,
complete as per specifications. Specification No.KBS 14.19

14.43 Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of Sqm
approved make, quality and colour of size 600x600x10mm thick fixed on
existing flooring with a special roffe adhesive for flooring and skirting etc.,
complete including providing spears at required interval and removing stains
etc., complete.
14.44 Providing and fixing Vitrified glazed tiles of approved make, quality & colour of Sqm
size 600 x 600 x 1Omm thick fixed on existing flooring with special adhesive
for flooring, skirting and jointed with neat cement slurry mixed with pigment to
mach shade of tiles, including providing spacers at required interval and
removing stains, cost of materials, mortar, labour etc., complete as per
specification.

14.45 Providing and fixing Vitrified glazed tiles of approved make, quality & colour of Sqm
size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for
flooring, skirting and jointed with neat cement slurry mixed with pigment to
mach shade of tiles, including providing spacers at required interval and
removing stains, including cost of all mateirals, mortar, labour, etc , Complete
as per specification.

14.45.1 Providing and fixing Vitrified glazed tiles of approved make, quality & colour of Sqm
size 900 x 900 x 12mm thick fixed on bed of 12mm thick cement mortar for
flooring, skirting and JOinted with neat cement slurry mixed with pigment to
mach shade of tiles, including providing spacers at required interval and
removing stains, including cost of all mateirals, mortar, labour, etc., Complete
as per specification.

14.46 Providing and laying pattern flooring for staircase treads and risers using the Sqm
combination of 20mm thick ruby red granite @ 66%,20 mm thick grey granite
@ 20%, 20mm thick, 20mm thick black granite 14%. The granite materials are
laid on existing bed of CM 1:3 20mm thick pointed with colour pigment,
including full rounding for nosing, flaming the ruby red granite for 50 mm wide
curing etc., complete as per specification.

14.47.1 Providing and laying flooring using prepolished, water cut/gang saw 19mm Sqm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying POP
on finished surface and cleaning the surface, including the cost of all materials
and labours etc., complete as per specifications. - using silver grey granite /
Multy Red / Ruby Red / Black / HassanGreen Granite of width not less than
1200mm

14.47.2 Providing and laying flooring using prepolished, water cut/gang saw 19mm Sqm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying POP
on finished surface and cleaning the surface, including the cost of all materials
and labours etc., complete as per specifications. - using silver grey granite /
Multy Red / Ruby Red / Black / HassanGreen Granite of width not less than
900mm
14.47.3 Providing and laying flooring using prepolished, water cut/gang saw 19mm Sqm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying POP
on finished surface and cleaning the surface, including the cost of all materials
and labours etc., complete as per specifications. - using 10mm thick silver grey
granite / Multy Red / Ruby Red/ Black / Hassan Green Granite tiles

14.47.4 Providing and laying flooring using prepolished, water cut/gang saw 19mm Sqm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying POP
on finished surface and cleaning the surface, including the cost of all materials
and labours etc., complete as per specifications. - using 19mm thick Raw Silk /
Black Pearl granite of width not less than 1200 mm

14.47.5 Providing and laying flooring using prepolished, water cut/gang saw 19mm Sqm
thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement
slurry mixed with pigment to mach shade of granite slabs including laying POP
on finished surface and cleaning the surface, including the cost of all materials
and labours etc., complete as per specifications. - using 19mm thick Raw Silk /
Black Pearl granite of width not less than 900 mm

14.48.1 Providing and laying flooring for corridors/lobbies using combination of pre Sqm
polished 19 mm thick water cut/gang saw Grey Granite, Black Granite, and
strips of 50mm wide pre flamed grey granite using pre polished grey granite
19mm thick 76%, Pre polished black granite 19mm thick @ 2% and preflamed
19mm thick grey granite @22% over existing cement concrete bed in CM 1:4
average 20mm thick pointed with white cement/colour pigment etc., complete.
- using 19mm thick granite width not less than 1200mm

14.48.2 Providing and laying flooring for corridors/lobbies using combination of pre Sqm
polished 19 mm thick water cut/gang saw Grey Granite, Black Granite, and
strips of 50mm wide pre flamed grey granite using pre polished grey granite
19mm thick 76%, Pre polished black granite 19mm thick @ 2% and preflamed
19mm thick grey granite @22% over existing cement concrete bed in CM 1:4
average 20mm thick pointed with white cement/colour pigment etc., complete.
- using 10mm thick granite slab

14.49 Providing and fixing of wall cladding using 20mm thick gang saw water cut Sqm
Shiva gold granite, grey granite in CM 1:3 proportion cut to required shape,
pattern with paper joints, finished with cement mortal using white cement and
colour pigments to match the colour of slab making through jointing with
sealant, making holes 25mmx12mm grooves in joints including curing etc.,
complete.

14.50 "Providing and fixing skirting of 300mm high using prepolished water cut/gang M
saw of 19mm thick grey granite 0.5mm wide chamfered width and depth and
fixing in CM 1:4 of 20mm thick after chipping the walls etc., complete.”

14.51 Providing and laying Hassan Green granite flooring for staircase, treads and Sqm
rises using pre polished 20 mm thick water cut green Granite slab laid over
existing cement concrete bed in CM 1:3, average 20mm thick including full
rounding for nosing , cutting 3 line grooves not more than 2 mm wide for
antiskidding, curing etc.,complete.
14.52 Providing and laying plat form using prepolished, water cut / gang saw 40mm Sqm
thick telephonic Black Granite. laid on existing vertical -supports and fixing in
CM 1:3 proportion. Including cutting to required shape, pattern with paper
joints, including full rounding for nosing, finished with cement mortar, pointed
with colour pigments to match the colour of slab making through jointing with
sealant, making holes 25mm x 12mm grooves in joints including curing.

14.53 Providing full nosing for 40mm thick granite slab using required machinery M
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification
14.54 Providing half nosing for 40mm thick granite slab using required machinery M
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification
14.55 Providing full nosing for 20mm thick granite slab using required machinery M
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification
14.56 Providing half nosing for 20mm thick granite slab using required machinery M
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification
14.57 Providing and fixing for flooring 40mm thick sadarhalli grey flammed granite Sqm
slab for bath areas in Bathrooms over a bed of 25mm thick CM 1:6 and fixing
granite slab with CM 1:3.
14.58 Providing and fixing granite flooring in combination of 19mm thick (Avg) gang Sqm
saw water cut LAKARED granite with 86% and with 14% of 19mm thicl (avg)
Black granite in CM 1:4 proportion with a coat of rough plastering using CM
1:4, cut to required shape, pattern with paper joints, finished with cement
mortar using white cement and colour pigments to match the colour of slab
making through jointing with sealant, grooves in joints including cost of curing
etc., complete including cost and conveyance of all materials, labour for all
items of work, HOM of equipment etc., complete as per specification

14.59 Providing and fixing for flooring 20mm thick gang saw water cut telephonic Sqm
black granite in CM 1:4 proportion with a coat of rough plastering using CM
1:4, cut to required shape, pattern with paper joints, finished with cement
mortar using white cement and colour pigments to match the colour of slab
making through jointing with sealant, grooves in joints including cost of curing
etc., complete including cost and conveyance of all materials, labour for all
items of work, HOM of equipment etc., complete as per specification

14.60 Providing and fixing 20mm thick gang saw water cut LAKARED granite in CM Sqm
1:4 proportion with a coat of rough plastering using CM 1:4, cut to required
shape, pattern with paper joints, finished with cement mortar using white
cement and colour pigments to match the colour of slab making through
jointing with sealant, grooves in joints including cost of curing etc., complete
including cost and conveyance of all materials, labour for all items of work,
HOM of equipment etc., complete as per specification .

14.61.1 Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli gray Sqm
granite in CM 1:4 proportion, cut to required shape, pattern with paper joints,
finished with cement mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant, groves in joints
including cost of curing - minimum width of 1200mm
14.61.2 Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli gray Sqm
granite in CM 1:4 proportion, cut to required shape, pattern with paper joints,
finished with cement mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant, groves in joints
including cost of curing - minimum width of 900mm.
14.62 Providing and laying/fixing cement base, precast, pre polished cement Sqm
concrete, designer tiles 25mm thick for flooring conforming to IS 1237 heavy
duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick
cement mortar 1:3 mis finished with flush pointing using white cement,
including cost of materials, including cutting, griding the edge to half/full round
wherever required, labour, curing complete as per specification.

14.63 Providing and fixing Ceramic tiles of size 400x400mm for flooring, threads, Sqm
steps and landing, laid on a bed of 20mm thick cement mortar 1:3 mix flush
pointing with white cement mixed with matching colour pigment including
curing, cleaning etc., complete. The work includes cost of all materials, labour
charges for all items of work, hire charges for equipment, , etc., complete as
per specification

14.64 Providing and fixing colour glazed tiles of size 300mmx600mm for walls with Sqm
borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with white
cement with matching colour pigment with necessary curing, cleaning including
providing and removing scaffolding wherever necessary etc., complete. The
work includes cost of all materials, labour charges for all items of work, hire
charges for equipment, etc., complete as per specification.

14.65 Providing and fixing colour glazed tiles of size 300mmx450mm for walls with Sqm
borders of size 300x100mm, set in Cement Mortar 1:3 and pointed with white
cement with matching colour pigment with necessary curing, cleaning including
providing and removing scaffolding wherever necessary etc., complete. The
work includes cost of all materials, labour charges for all items of work, hire
charges for equipment, etc., complete as per specification.

14.67.1 Providing and fixing of wall cladding using 20 mm thick gang saw water cut Sqm
granite in CM 1:3 proportion cut to required shape patron with paper joint
finished with cement mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant, making holes 25mm ×
12mm grooves in joints including curing etc., complete - with grey granite
20mm thick gang saw with minimum width 1200

14.67.2 Providing and fixing of wall cladding using 20 mm thick gang saw water cut Sqm
granite in CM 1:3 proportion cut to required shape patron with paper joint
finished with cement mortar using white cement and colour pigments to match
the colour of slab making through jointing with sealant, making holes 25mm ×
12mm grooves in joints including curing etc., complete - with Sadarahalli
granite 20mm thick gang saw with minimum width 1200

14.68 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick Sqm
on 12mm thick cement mortar 1:3 & jointed with Adhesive / cement slurry over
rough plaster surface excluding cost of rough plasterd surface and the surface
is painted with red apex paint and black apex paint into the groves.

14.69 Supplying, fabricating and fixing of Stainless steel cladding for walls using 304 Sqm
grade Stainless steel 16 guage sheet wall cladding of thickness over the frame
made out of 50x50mmx3mm thickness anodized aluminium frame work at an
equal distance of 2 ft vertifically fixed to the wall using 100mm screws, guttas,
anchor bolts and fastners with all necessary bending and cutting as per the
desing and site condition. The frame work finally to be finished with 12mm
BWP plywood to receive the SS sheet on it uniformly

14.70 Providing and laying of teak wooden polished flooring of 12mm thick, high Sqm
density timber of approved colour and design with end trims, transition,
profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm thick
foam underlay etc.,
14.71 Providing and laying of Modular wooden polished flooring of 12mm thick, high Sqm
density timber of approved colour and design with end trims, transition,
profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm thick
foam underlay etc.,
14.72 Providing Venyl flooring of approved quality and make, fixed on the top of Sqm
existing flooring fixed with suitable adhesive, including cutting to the requied
size and fixing etc. complete
Basic Rate
1,160.00

1,119.00

2,432.00

3,246.00

1,188.00

1,059.00

1,117.00

368.00

682.00
 625.00

36.00

408.00

650.00

725.00

1,260.00

1,385.00

1,294.00
1,455.00

1,585.00

1,506.00

1,558.00

40.00

49.00

705.00
 811.00

653.00

779.00

1,075.00

1,177.00

1,138.00

1,241.00

1,127.00
1,213.00

1,352.00

1,352.00

3,587.00

326.00

344.00

1,171.00

1,274.00

1,635.00
1,278.00

3,871.00

1,099.00

1,035.00

979.00

1,139.00

7,199.00

2,743.00

2,412.00
1,404.00

2,742.00

2,383.00

2,626.00

1,756.00

3,546.00

760.00

4,463.00
3,525.00

540.00

360.00

270.00

180.00

1,839.00

3,479.00

2,392.00

3,475.00

2,056.00

1,983.00
 1,235.00

1,136.00

1,216.00

1,036.00

2,451.00

2,333.00

1,500.00

12,350.00

4,800.00
2,720.00

560.00
Item No. Description Unit
15.1 KSRB 15.1.1 Providing flush pointing to square rubble, course or uncoursed Sqm
stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth
of 20mm nicely lining, including cost of materials, labour, curing complete as
per specifications.
15.2 KSRB 15.1.2 Providing flush pointing to square rubble, course or uncoursed Sqm
stone masonry with cement mortar 1:4, 20mm deep, after raking joints to depth
of 20mm nicely lining, including cost of materials, labour, curing complete as
per specifications.
15.3 KSRB 15.1.3 – do – Providing ruled pointing to coursed stone masonry with Sqm
cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely
lining, including cost of materials, labour, curing complete as per specifications.

15.4 KSRB 15.1.4 Providing ruled pointing to coursed stone masonry with cement Sqm
mortar 1:4, 20mm deep, after raking joints to depth of 20mm nicely lining,
including cost of materials, labour, curing complete as per specifications.

15.5 KSRB 15.1.5 Providing raised and cut pointing to coursed stone masonry with Sqm
cement mortar 1:3, 20mm, after raking joints to depth of 20mm nicely lining,
including cost of materials, labour, curing complete as per specifications.

15.6 KSRB 15.1.6 Providing raised and cut pointing to coursed stone masonry with Sqm
cement mortar 1:4, 20mm, after raking joints to depth of 20mm nicely lining,
including cost of materials, labour, curing complete as per specifications.

15.7 KSRB 15.2.1 Providing flush pointing to stone slab pavements, with cement Sqm
mortar 1:3, after raking joints, nicely lining, including cost of materials, labour,
curing complete as per specifications.
15.8 KSRB 15.2.2 Providing ruled pointing to stone slab pavements with cement Sqm
mortar 1:3, 20mm deep, after raking joints , including cost of materials, labour,
curing complete as per specifications.
15.9 KSRB 15.3.1 Providing 12mm thick cement plaster in single coat with cement Sqm
mortar 1:3, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.1 KSRB15-3.2 : Providing 12mm thick cement plaster in single coat with cement Sqm
mortar 1:4, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.11 KSRB15-3.3 : Providing 12mm thick cement plaster in single coat with cement Sqm
mortar 1:6, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.12 KSRB15-3.4 : Providing 15mm thick cement plaster in single coat with cement Sqm
mortar 1:3, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.13 KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with cement Sqm
mortar 1:4, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.14 KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement Sqm
mortar 1:6, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.15 KSRB15-3.7 : Providing 18mm thick cement plaster in single coat with cement Sqm
mortar 1:3, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.16 KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement Sqm
mortar 1:4, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.17 KSRB15-3.9 :Providing 18mm thick cement plaster in single coat with cement Sqm
mortar 1:6, to brick masonry including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.18 KSRB15-3.10 : Providing 20mm thick cement plaster in single coat with Sqm
cement mortar 1:3, to stone masonry & concrete surface including rounding off
corners wherever required smooth rendering, : Providing and removing
scaffolding, including cost of materials, labour, curing complete as per
specifications.
15.19 KSRB15-3.11 : Providing 20mm thick cement plaster in single coat with cement Sqm
mortar 1:4, to stone masonry & concrete surface including rounding off corners
wherever required smooth rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications.

15.2 KSRB15-3.12 :Providing 20mm thick cement plaster in single coat with cement Sqm
mortar 1:6, to stone masonry & concrete surface including rounding off corners
wherever required smooth rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications.

15.21 KSRB15-3-13 : Providing 12mm thick cement plaster in single coat with Sqm
cement mortar 1:3, to ceiling including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.22 KSRB15-3.14 : Providing 12mm thick cement plaster in single coat with Sqm
cement mortar 1:4, to ceiling including rounding off corners wherever required
smooth rendering, : Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.23 KSRB15-4.1 Extra for providing and mixing waterproofing compound in cement Sqm
plaster work at one kg per bag or in the proportion recommended by the
manufacturers, for cement mortar 1:3, 12mm thick cost of materials complete
as per specifications.
15.24 KSRB15-4.2 Extra for providing and mixing waterproofing compound in cement Sqm
plaster work at one kg per bag or in the proportion recommended by the
manufacturers, for cement mortar 1:4, 12mm thick cost of materials complete
as per specifications.
15.25 KSRB15-4.3 Extra for providing and mixing waterproofing compound in cement Sqm
plaster work at one kg per bag or in the proportion recommended by the
manufacturers, for cement mortar 1:4, 15mm thick cost of materials complete
as per specifications.
15.26 KSRB15-4.4 Extra for providing and mixing waterproofing compound in cement Sqm
plaster work at one kg per bag or in the proportion recommended by the
manufacturers, forcement mortar 1:4, 18mm thick cost of materials complete
as per specifications.
15.27 KSRB15-4.5 Extra for providing and mixing waterproofing compound in cement Sqm
plaster for stone masonry work at one kg per bag or in the proportion
recommended by the manufacturers, for cement mortar 1:4, 20mm thick cost
of materials complete as per specifications.
15.28 KSRB15-4.6 Extra for providing and mixing waterproofing compound in cement Sqm
plaster for birck masonry work at one kg per bag or in the proportion
recommended by the manufacturers, for cement mortar 1:3, 20mm thick cost
of materials complete as per specifications.
15.29 KSRB15-4.7 Extra for providing and mixing waterproofing compound in cement Sqm
plaster for brick masonry work at one kg per bag or in the proportion
recommended by the manufacturers, for cement mortar 1:4, 20mm thick cost
of materials complete as per specifications.
15.3 KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat Sqm
with cement mortar 1:4, to brick masonry for base of dadooing works with sand
of approved quality, providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.31 KSRB15-5.2 : Providing rough cement plastering 15mm thick in single coat Sqm
with cement mortar 1:6, to brick masonry for base of dadooing works with sand
of approved quality, providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.
15.32 KSRB15-6 : Providing floating coat of cement to plastering and finishing Sqm
smooth, including cost of materials, labour, curing complete as per
specifications.
15.33 KSRB15-7 : Providing lime rendering for plastering to wall and ceiling, Sqm
including cost of materials, labour, curing complete as per specifications.
15.34 KSRB 15.8.1 Providing and fixing plaster mesh 100mm wide manufactured out M
of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating
of 120gms per sqm width, along route of walls chipped for services, junction
between RCC and brick walls including cost of materials, labour for fixing
complete as per specifications. ( length of mesh only be measured for payment
)

15.35 KSRB 15.8.2 Providing and fixing plaster mesh 150mm wide manufactured out M
of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating
of 120gms per sqm width, along route of walls chipped for services, junction
between RCC and brick walls including cost of materials, labour for fixing
complete as per specifications. ( length of mesh only be measured for payment
)

15.36 KSRB 15.8.3 Providing and fixing plaster mesh 200mm wide manufactured out M
of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating
of 120gms per sqm width, along route of walls chipped for services, junction
between RCC and brick walls including cost of materials, labour for fixing
complete as per specifications. ( length of mesh only be measured for payment
)

15.37 KSRB 15.9 Providing and fixing corner beads 45x45mm size manufactured out M
of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating
of 120gms per sqm width, along exposed corners of walls, coloumns, lintels
including cost of materials, labour for fixing complete . (length of mesh be
measured for payment)
15.38 KSRB 15.10.1 Providing white washing to new wall surface in two coats with Sqm
lime of approved quality, to give an even shade including cost of materials,
labour, complete as per specifications.
15.39 KSRB 15.10.2 Providing white washing for every one additional coat with lime Sqm
of approved quality, to give an even shade including cost of materials, labour,
complete as per specifications.
15.4 KSRB 15.10.3 Providing white washing to ceiling and / or sloping roof surface Sqm
in two coats with lime of approved quality, to give an even shade including cost
of materials, labour, complete as per specifications.
15.41 KSRB 15.10.4 Providing white washing to ceiling and / or sloping roof surface Sqm
with additional one coat with lime of approved quality, to give an even shade
including cost of materials, labour, complete as per specifications.
15.42 KSRB 15.11.1Providing cement washing to rough wall surface in one coat with Sqm
portland cement slurry to give an even shade after throughly brooming the
surface to remove all dirt, dust, mortar drops and other foreign matter including
cost of materials, labour, complete as per specifications.
15.43 KSRB 15.11.2 Providing cement washing on iron surface in one coat with Sqm
portland cement slurry mixed with boiled linseed oil to give an even surface
after thoroughly cleaning the surface to remove all dirt, dust, mortar drops and
other foreign matter including cost of materials, labour, complete as per
specifications.
15.44 KSRB 15.12.1Providing Gopi colour washing to new wall surface in two coats Sqm
with lime and gopi colour of approved quality, to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops and
other foreign matter including cost of materials, labour, complete as per
specifications.
15.45 KSRB 15.12.2 Providing Gopi colour washing to new wall surface in one coat Sqm
with lime and gopi colour of approved quality, to give an even shade after
thoroughly brooming the surface to remove all dirt, dust, mortar drops and
other foreign matter including cost of materials, labour, complete as per
specifications.
15.46.1 KSRB15-13 : Applying of distemper KSRB 15-13.1 : Providing and applying Sqm
one coat distemper primer of approved brand on wall surface after throughly
brooming the surface to remove all dirt, dust, mortar drops and other foreign
matter including preparing the surface, even and sand paper smooth, cost of
materials, labour, complete as per specifications. -wall surface-

15.46.2 KSRB 15-13.2 : Extra over Item 15-13.1 for applying one coat of distemper Sqm
primer over ceiling and / or sloping roof as per specifications.
15.47.1 KSRB 15-13.3 : Providing and applying two coats dry distemper of approved Sqm
brand, and shade on wall surface including priming coat and whitening after
throughly brooming the surface to remove all dirt, dust, mortar drops and other
foreign matter including preparing the surface even and sand paper smooth,
cost of materials, labour, complete as per specifications.

15.47.2 KSRB 15-13.4 : Extra over Item 15-13.3 for applying distemper primer over Sqm
ceiling and / or sloping roof as per specifications.
15.48.1 KSRB 15-13.5 : Providing and applying one coat on old surface dry distemper Sqm
of approved brand, and shade on wall surface after thoroughly brooming the
surface clean of all gease, dirt, loose pieces of scales including preparing the
surface even and sand paper smooth, cost of material, labour, complete as per
specifications. -wall surface-
15.48.2 KSRB 15-13.6 : Extra over Item 15-13.5 for applying distemper over ceiling Sqm
and /or sloping roof as per specifications.
15.48.3 KSRB 15-13.7 : Extra for providing and applying every subsequent cost of dry Sqm
distemper of approved brand , for item no. 15-13.3 and 15-13.5 of approved
shade on wall surface cost of materials, labour, complete as per specifications.

15.49.1 KSRB 15-14.1 : Providing and applying two coats with oil bound washable Sqm
distemper of approved brand and shade on wall surface including priming coat
with distemper primer after throughly brooming the surface free from mortar
drops and other foreign matter including preparing the surface even and sand
paper smooth, cost of materials, labour, complete as per specifications.

15.49.2 KSRB 15-14.2 : Extra over Item 15-14.1 for applying oil bound washable Sqm
distemper on ceiling and / or sloping roof as per specifications.
15.50.1 KSRB 15-14.3 : Providing and applying one coat with oil bound washable Sqm
distemper of approved brand and shade on wall surface to give an even shade
after throughly brooming the surface free from all grease, dirt, loose peases of
scales, including preparing the surface even and sand paper smooth, cost of
materials, labour, complete as per specifications.
15.50.2 KSRB 15-14.4 : Extra over Item 15-14.3 for applying one coat with oil bound Sqm
washable distemper on ceiling and / or sloping roof as per specifications.

15.51.1 KSRB 15-15.1 : Providing and applying painting in two coats with plastic Sqm
emulsion paint of approved brand on wall surface to give an even approved
shade after thoroughly brushing the surface, free from mortar drops and other
foreign matter including preparing the surface even and sand paper smooth,
cost of materials, labour, complete as per specifications.
15.51.2 KSRB 15-15.1 : Providing and applying painting in two coats with plastic Sqm
emulsion paint of approved brand on wall surface to give an even approved
shade after thoroughly brushing the surface, free from mortar drops and other
foreign matter including preparing the surface even and sand paper smooth,
cost of materials, labour, complete as per specifications. - with primer

15.51.3 KSRB 15-15.2 : Extra over Item 15-15.1 for painting two coats with plastic Sqm
emulsion paint of approved brand and shade on ceiling and / or sloping roof as
per specifications.
15.52.1 KSRB 15-15.3 : Providing and applying painting in one coat with plastic Sqm
emulsion paint of approved brand and manufacture on wall surface to give an
even approved shade after throughly brushing the surface, free from mortar
drops and other foreign matter including preparing the surface even and sand
paper smooth, cost of materials, labour, complete as per specifications.

15.52.2 KSRB 15.15.4 : Extra over Item 15-15.3 for painting with one coat plastic Sqm
emulsion paint of approved brand and shade on ceiling and / or sloping roof as
per specifications.
15.52.3 KSRB 15-15.5 : Extra for providing and applying every subsequent coat of Sqm
painting with plastic emulsion paint of approved brand and shade for Item
no.15-15.1 and 15-15.3 cost of materials, labour, complete as per
specifications.
15.53.1 KSRB 15-16.1 : Providing and finishing external walls in two coats with Sqm
waterproof cement paint of approved brand and shade to give an even shade
after throughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
15.53.2 KSRB 15-16.1 : Providing and finishing external walls in two coats with Sqm
waterproof cement paint of approved brand and shade to give an even shade
after throughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications. - with primer
15.53.3 KSRB 15-16.3 : Extra for providing and applying every subsequent coat of Sqm
waterproofing cement paint of approved brand and shade for Item no.15-16.1
cost of materials, labour, complete as per specifications.
15.54.1 KSRB 15-16.2 : Providing and finishing external walls in one coat with Sqm
waterproof cement paint of approved brand and shade to give an even shade
after throughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
15.54.2 KSRB 15-16.2 : Providing and finishing external walls in one coat with Sqm
waterproof cement paint of approved brand and shade to give an even shade
after throughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications. - with primer
15.54.3 KSRB 15-16.3 : Extra for providing and applying every subsequent coat of Sqm
waterproofing cement paint of approved brand and shade for Item no.15-16.1
and 15-16.2 cost of materials, labour, complete as per specifications.
15.55 KSRB 15-17.1 : Applying priming coat over new wood surface and / or wood Sqm
based surface with white lead paint priming including preparing the surface
after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering
and knotting ready mix paint including cost of materials, labour, complete as
per specifications.
15.56 KSRB 15-17.2 : Applying priming coat over new wood surface and / or wood Sqm
based surface after brushing with wood primer pink paint including preparing
the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand
papering and knotting ready mix paint including cost of materials, labour,
complete as per specifications.
15.57 KSRB 15-17.3 : Applying priming coat over new wood surface and / or wood Sqm
based surface after brushing with aluminium paint primer, water resistant
including preparing the surface after thoroughly cleaning oil, grease, dirt and
foreign matter, sand papering and knotting ready mix paint including cost of
materials, labour, complete as per specifications.
15.58 KSRB 15-17.4 : Applying priming coat over new wood surface and / or wood Sqm
based surface, after brushing with ready mix enamel priming paint including
preparing the surface after thoroughly cleaning oil, grease, dirt and foreign
matter, sand papering and knotting ready mix paint including cost of materials,
labour, complete as per specifications.
15.59 KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood Sqm
based surface after preparing the surface after throughly cleaning oil, grease,
dirt and foreign matter, sand papering and knotting liquid wood filler, for varnish
including cost of materials, labour, complete as per specifications.

15.60.1 KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming Sqm
coat ) on new wood surface and / or wood based surface with enamel paint to
give an even shade, cleaning the surface of all dirt, dust and foreign matter,
sand papering including cost of materials, labour, complete as per
specifications.
15.60.2 KSRB 15-17.8 : Extra over Item No. 15-17.6 for applying every subsequent Sqm
coat of enamel paint to give an even shade after cleaning the surface of all dirt,
dust and foreign matter, sand papering including cost of materials, labour,
complete as per specifications.
15.61.1 KSRB 15-17.7 : Providing and applying painting one coat ( excluding priming Sqm
coat ) on new wood surface and / or wood based surface with enamel paint to
give an even shade after cleaning the surface of all dirt, dust and foreign
matter, sand papering including cost of materials, labour, complete as per
specifications.
15.61.2 KSRB 15-17.8 : Extra over Item No.15-17.7 for applying every subsequent Sqm
coat of enamel paint to give an even shade after cleaning the surface of all dirt,
dust and foreign matter, sand papering including cost of materials, labour,
complete as per specifications.
15.62.1 KSRB 15-17.9 : Applying varnish two coats ( excluding priming coat ) on new Sqm
wood surface and / or wood based surface undercoating with flatting varnish
and finishing coat with varnish to give an even shade after cleaning the surface
of all dirt, dust and foreign matter, sand papering so as to produce smooth dry,
mat surface including cost of materials, labour, complete as per specifications.
15.62.2 KSRB 15-17.11 : Extra over Item No. 15-17.9 and 15-17.10 for applying every Sqm
subsequent coat of varnish to produce a smooth dry and mat surface after
cleaning the surface of all dirt, dust and foreign matter, including cost of
materials, labour, complete as per specifications.
15.63.1 KSRB 15-17.10 : Providing and applying varnishing one coat ( excluding Sqm
priming coat ) on previously varnished wood / or wood based surface to give
an even surface after cleaning the surface of all dirt, dust and foreign matter,
sand papering so as to produce a smooth dry and mat surface, including cost
of materials, labour, complete as per specifications.
15.63.2 KSRB 15-17.11 : Extra over Item No. 15-17.9 and 15-17.10 for applying every Sqm
subsequent coat of varnish to produce a smooth dry and mat surface after
cleaning the surface of all dirt, dust and foreign matter, including cost of
materials, labour, complete as per specifications.
15.64 KSRB 15-17.12 : Providing and applying polishing with french polish on new Sqm
wood surface and / or wood based surface to give an even surface after
cleaning the surface of all dirt, dust and foreign matter, sand papered smooth,
including cost of wood filler and materials, labour, complete as per
specifications.
15.65 KSRB 15-17.13 : Providing and applying polishing with french polish over Sqm
previously polished wood or wood based surface to give an even surface after
cleaning the surface of all dirt, dust and foreign matter, sand papered smooth,
including cost of wood filler and materials, labour, complete as per
specifications.
15.66 KSRB 15-17.14 : Providing and applying wax polish in two coats on new wood Sqm
surface and / or wood based surface, with bees wax polish in proportion of
2:1.5:1:0.5 ( 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by
weight ) to give an even surface after cleaning the surface of all dirt, dust and
foreign matter, sand papered smooth, including cost of materials, labour,
complete as per specifications.

15.67 KSRB 15-17.15 : Providing and applying wax polish in single coat on new Sqm
wood surface and / or wood based surface, with bees wax polish in proportion
of 2:1.5:1:0.5 ( 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by
weight ) to give an even surface after cleaning the surface of all dirt, dust and
foreign matter, sand papered smooth, including cost of materials, labour,
complete as per specifications.

15.68 KSRB 15-17.16 : Providing and applying painting two coats ( excluding priming Sqm
coat ) on new wood surface and / or wood based surface with coal tar paint to
give an even shade after cleaning the surface of all dirt, dust and foreign
matter, including cost of materials, labour, complete as per specifications.

15.69 KSRB 15-17.17 : Providing and applying painting one coat ( excluding priming Sqm
coat ) on new wood surface and / or wood based surface with coal tar paint to
give an even shade after cleaning the surface of dirt, dust and foreign matter,
including cost of materials, labour, complete as per specifications.

15.7 KSRB 15-17.18 : Providing and applying painting one coat ( excluding priming Sqm
coat) on previously painted wood surface and / or wood based surface with
coal tar paint to give an even shade after cleaning the surface of all dirt, dust
and foreign matter, including cost of materials, labour, complete as per
specifications.
15.71 KSRB 15-17.19: Providing and applying painting one coat ( excluding priming Sqm
coat ) on previously painted wood surface and / or wood based surface with
black japan paint to give an even shade after cleaning the surface of all dirt,
dust and foreign matter, including cost of materials, labour, complete as per
specifications.
15.72 KSRB 15-17.20: Applying additional one coat ( excluding priming coat) on Sqm
previously painted wood surface and / or wood based surface with black japan
paint to give an even shade after cleaning the surface of all dirt, dust and
foreign matter, including cost of materials, labour, complete as per
specifications.
15.73 KSRB 15-18.1 : Applying red lead ready mix priming coat over new steel or Sqm
other metal surface including preparing the surface after throughly cleaning oil,
grease, dirt and other foreign matter, and scoured with wire brushes, fine steel
wool, sand papers including cost of materials, labour, complete as per
specifications.
15.74 KSRB 15-18.2 : Providing and applying enamel metal paint two coats Sqm
( excluding priming coat ) over new steel or other metal surface brushing to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.
15.75 KSRB 15-18.3 : Providing and applying enamel metal paint one coat Sqm
(excluding priming coat ) on previously painted steel or other metal surface
brushing to give an even shade after cleaning oil, grease, dirt and other foreign
matter, including cost of materials, labour, complete as per specifications.

15.76 KSRB 15-18.4 : Providing and applying alluminium paint two coats (excluding Sqm
priming coat ) over new steel or other metal surface brushing to give an even
shade after cleaning oil, grease, dirt and other foreign matter, including cost of
materials, labour, complete as per specifications.
15.77 KSRB 15-18.5 : Providing and applying alluminium paint one coat (excluding Sqm
priming coat ) on previously painted steel or other metal surface brushing to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.

15.78 KSRB 15-18.6 : Providing and applying black japan paint one coat (excluding Sqm
priming coat ) on previously painted steel or other metal surface brushing to
give an even shade after cleaning oil, grease, dirt and other foreign matter,
including cost of materials, labour, complete as per specifications.

15.79 KSRB 15-18.7 : Extra for applying every subsequent black japan paint on Sqm
previously painted steel or other metal surface brushing to give an even shade
after cleaning of oil, grease, dirt and other foreign matter, including cost of
materials, labour, complete as per specifications.
15.8 KSRB 15-19.1 : Providing and applying ready mix priming coat over concrete / Sqm
masonry / asbestos cement sheet / plastered surfaces including preparing the
surface after thoroughly cleaning of oil, grease, dirt and other foreign matter,
and sand papering including cost of materials, labour, complete as per
specifications.
15.81 KSRB 15-19.2 : Providing and applying spray painting in two coats (excluding Sqm
priming coat ) over concrete / masonry / asbestos cement sheet / plastered
surfaces with flat wall paint of approved brand to give even shade after
cleaning the surface of all dirt, dust and other foreign matter, and sand
papering including cost of materials, labour, complete as per specifications.

15.82 KSRB 15-19.3 : Providing and applying spray painting in one coat(excluding Sqm
priming coat ) over concrete / masonry / asbestos cement sheet / plastered
surfaces with flat wall paint of approved brand to give even shade after
cleaning the surface of all dirt, dust and other foreign matter, and sand
papering including cost of materials, labour, complete as per specifications.
15.83 KSRB 15-20.1 : Providing and applying floor painting with ready mix paint in Sqm
two coats ( exluding priming coat ) on new concrete / asbestos cement sheet /
plastered surfaces brushing to give an even shade after preparing the surface
after throughly cleaning oil, dirt, dust other foreign matter and sand papering
including cost of materials, labour, complete as per specifications.

15.84 KSRB 15-20.2 : Providing and applying floor painting with ready mix paint in Sqm
one coat ( exluding priming coat ) on new concrete / asbestos cement sheet /
plastered surfaces brushing to give an even shade after preparing the surface
after throughly cleaning oil, dirt, dust other foreign matter and sand papering
including cost of materials, labour, complete as per specifications.

15.85 KSRB 15-21.1 : Providing and applying wax polish on new concrete floor and Sqm
vertical plastered surface using approved brand to give an even shade after
preparing the surface after thoroughly cleaning oil, dirt, dust other foreign
matter, including cost of materials, labour, complete as per specifications.

15.86 KSRB 15-21.2 : Providing and applying wax polish on new concrete floor and Sqm
vertical plastered surface using approved brand to give an even shade after
preparing the surface after thoroughly cleaning oil, dirt, dust other foreign
matter, including cost of materials, labour, complete as per specifications.
previously polished concrete floor
15.87 KSRB 15-22.1 : Providing marble chips skirting or dado ( upto 30cms height ) Sqm
rubbed and polished to granolithic finish, top layer 6mm thick with white, black,
chocolate, grey, yellow or baroda green marble chips from smallest to 4mm
nominal size dark shade pigment with ordinary cement ( in top layer only ) laid
in cement marble powder 3:1 ( 3 cement : 1 marble powder by weight ) in
proportion of 4:7 (4 cement marble powder mix : 7 marble chips by volume )
overall thickness 24mm (18mm thick under layer, 6mm thick top layer ) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.

15.88 KSRB 15-22.2 : Providing marble chips skirting or dado ( upto 30cms height ) Sqm
rubbed and polished to granolithic finish, top layer 6mm thick, with white, black,
chocolate, grey, yellow or baroda green marble chips from smallest to 4mm
nominal size, light shade pigment with white cement ( in top layer only ) laid in
cement marble powder 3:1 ( 3 cement : 1 marble powder by weight ) in
proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by volume )
overall thickness 24mm (18mm thick under layer, 6mm thick top layer ) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.

15.89 KSRB 15-22.3 : Providing marble chips skirting or dado ( upto 30cms height ) Sqm
rubbed and polished to granolithic finish top layer 6mm thick with white, black,
chocolate, grey, yellow or baroda green marble chips from smallest to 4mm
nominal size, medium shade pigment with approximately 50% white cement
and 50% ordinary cement (in top layer only ) laid in cement marble powder 3:1
( 3 cement :1 marble powder by weight ) in proportion of 4:7 ( 4 cement marble
powder mix : 7marble chips by volume) overall thickness 24mm ( 18mm thick
under layer, 6mm thick top layer ) in cement mortar of mix 1:3 including cost of
materials, labour, complete as per specifications.
15.90 KSRB 15-22.4 : Providing marble chips skirting or dado ( upto 30cms height ) Sqm
rubbed and polished to granolithic finish top layer 6mm thick with white, black,
chocolate, grey, yellow or baroda green marble chips from smallest to 4mm
nominal size, white cement without any pigment ( in top layer only ) laid in
cement marble powder 3:1 ( 3 cement : 1 marble powder by weight ) in
proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips by volume )
overall thickness 24mm (18mm thick under layer, 6mm thick top layer ) in
cement mortar of mix 1:3 including cost of materials, labour, complete as per
specifications.

15.91 KSRB 15-22.5 : Extra labour for work in dado exceeding 30 cms in height Sqm
including cost of labour, complete as per specifications.
15.92 KSRB 15-23.1 : Providing pre-cast grey colour mosaic tiles 20mm thick with M
marble chips of white, black, chocolate, grey, yellow or baroda green from
smallest to 6mm nominal size, with ordinary cement ( in top layer only ) for
skirting and rises of steps ( not exceeding 30cms height) on 10cms thick
cement mortar 1:3 jointed with neat cement slurry, rubbed and polished to
granolithic finish, including cost of materials, labour, complete as per
specifications.

15.93 KSRB 15-23.2 : Providing pre-cast mosaic tiles using light shade pigment with M
white cement 20mm thick with marble chips of white, black, chocolate, grey,
yellow or baroda green from smallest to 6mm nominal size, with ordinary
cement ( in top layer only ) for skirting and rises of steps ( not exceeding
30cms height ) on 10cms thick cement mortar 1:3 jointed with neat cement
slurry, rubbed and polished to granolithic finish, including cost of materials,
labour, complete as per specifications.

15.94 KSRB 15-23.3 : Providing pre-cast mosaic tiles using medium shade pigment M
using approximately 50% white cement and 50% ordinary cement 20mm thick
with marble chips of white, black, chocolate, grey, yellow or baroda green from
smallest to 6mm nominal size, with ordinary cement ( in top layer only ) for
skirting and rises of steps ( not exceeding 30cms height ) on 10cms thick
cement mortar 1:3 jointed with neat cement slurry, rubbed and polished to
granolithic finish, including cost of materials, labour, complete as per
specifications.

15.95 KSRB 15-23.4 : Providing pre-cast mosaic tiles of white shade with white M
cement without any pigment 20mm thick with marble chips of white, black,
chocolate, grey, yellow or baroda green from smallest to 6mm nominal size,
with ordinary cement ( in top layer only ) for skirting and rises of steps ( not
exceeding 30cms height ) on 10cms thick cement mortar 1:3 jointed with neat
cement slurry, rubbed and polished to granolithic finish, including cost of
materials, labour, complete as per specifications.

15.96 Providing melamine polishing of approved shade including removing and Sqm
refixing of doors shutters scraping with blade and rubbing with zero size sand
paper and applying sealer coat by way of spraying with necessary compressor
and applying patty after rubbing with steel wool including two coats of
approved shade of melamine polish etc., complete.
15.97 Providing melamine polishing of approved shade including removing and Sqm
refixing of doors shutters, glass, beading and existing polishing, scraping with
blade and rubbing with zero size sand paper and applying sealer coat by way
of spraying with necessary compressor and applying patty after rubbing with
steel wool including two coats of approved shade of melamine polish etc.,
complete.

15.98.1 Providing and mixing Synthetic fibers 100% Virgin triangular monofilament Sqm
polyster fibers 6mm in cut length for use as micro reinforcement for application
at 125 grams per bag of cement I.e 0.25% by weight of cement. - for CM 1:4,
20mm thick
15.98.2 Providing and mixing Synthetic fibers 100% Virgin triangular monofilament Sqm
polyster fibers 6mm in cut length for use as micro reinforcement for application
at 125 grams per bag of cement I.e 0.25% by weight of cement. - for CM 1:4,
12mm thick
15.98.3 Providing and mixing Synthetic fibers 100% Virgin triangular monofilament Sqm
polyster fibers 6mm in cut length for use as micro reinforcement for application
at 125 grams per bag of cement I.e 0.25% by weight of cement. - for CM 1:6,
20mm thick
15.98.4 Providing and mixing Synthetic fibers 100% Virgin triangular monofilament Sqm
polyster fibers 6mm in cut length for use as micro reinforcement for application
at 125 grams per bag of cement I.e 0.25% by weight of cement. - for CM 1:6,
12mm thick
15.99 Providing and mixing Synthetic fiber 100% virgin triangular monofilament Sqm
polyester fibers for use as micro secondary reinforcement in guitie and
shotcrete civil works with application dosage of 125-175 grams per bag of
cement i.e. 0.25%-0.30% by weight of cement.
15.100.1 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin Sqm
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
per bag of cement in both coats of the plaster. Harbourite 12mm long shall be
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:3 , 20mm thick

15.100.2 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin Sqm
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
per bag of cement in both coats of the plaster. Harbourite 12mm long shall be
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:3 , 12mm thick

15.100.3 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin Sqm
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
per bag of cement in both coats of the plaster. Harbourite 12mm long shall be
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:4 , 20mm thick

15.100.4 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin Sqm
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
per bag of cement in both coats of the plaster. Harbourite 12mm long shall be
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:4 , 12mm thick
15.100.5 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin Sqm
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
per bag of cement in both coats of the plaster. Harbourite 12mm long shall be
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:6 , 20mm thick

15.100.6 Providing and mixing fiber mesh Harbourite fine fibrillated 100% virgin Sqm
polypropylene fibers contains no olefin materials and are specially engineered
manufactured to use as cementitious micro reinforcement. Application @125
gms for 1:3 cement mortar, 150 gms for 1:4 CM and 200 gms for 1:6 CM mix
per bag of cement in both coats of the plaster. Harbourite 12mm long shall be
used in the back coat and Harbourite 6 mm long fibers shall be used in the top
coat. Fibermesh Harbourite fibers should be confirming to ASTM C 1116 ACI
524-93. - for CM 1:6, 12mm thick

15.101.1 Providing and mixing fibermesh stealth micro blocker anti microbial multi Sqm
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient built
in to the polymer structure of the fiber itself during manufacturing process.It
should prevent the growth of micro organisms like bacteria, mold fungus,
mildew etc. on concrete surfaces. Application top of plaster to be mixed in
mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3, 175 gm for
CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker shall confirm
to ASTM C-1116 type 111 4.1.3. - for CM 1:3, 20mm thick

15.101.2 Providing and mixing fibermesh stealth micro blocker anti microbial multi Sqm
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient built
in to the polymer structure of the fiber itself during manufacturing process.It
should prevent the growth of micro organisms like bacteria, mold fungus,
mildew etc. on concrete surfaces. Application top of plaster to be mixed in
mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3, 175 gm for
CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker shall confirm
to ASTM C-1116 type 111 4.1.3. - for CM 1:3, 12mm thick

15.101.3 Providing and mixing fibermesh stealth micro blocker anti microbial multi Sqm
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient built
in to the polymer structure of the fiber itself during manufacturing process.It
should prevent the growth of micro organisms like bacteria, mold fungus,
mildew etc. on concrete surfaces. Application top of plaster to be mixed in
mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3, 175 gm for
CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker shall confirm
to ASTM C-1116 type 111 4.1.3. - for CM 1:4, 20mm thick
15.101.4 Providing and mixing fibermesh stealth micro blocker anti microbial multi Sqm
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient built
in to the polymer structure of the fiber itself during manufacturing process.It
should prevent the growth of micro organisms like bacteria, mold fungus,
mildew etc. on concrete surfaces. Application top of plaster to be mixed in
mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3, 175 gm for
CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker shall confirm
to ASTM C-1116 type 111 4.1.3. - for CM 1:4, 12mm thick

15.101.5 Providing and mixing fibermesh stealth micro blocker anti microbial multi Sqm
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient built
in to the polymer structure of the fiber itself during manufacturing process.It
should prevent the growth of micro organisms like bacteria, mold fungus,
mildew etc. on concrete surfaces. Application top of plaster to be mixed in
mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3, 175 gm for
CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker shall confirm
to ASTM C-1116 type 111 4.1.3. - for CM 1:6, 20mm thick

15.101.6 Providing and mixing fibermesh stealth micro blocker anti microbial multi Sqm
filament 100% virgin polypropylene fibers which should be free from
reprocessed olefin materials, containing an active anti microbial ingredient built
in to the polymer structure of the fiber itself during manufacturing process.It
should prevent the growth of micro organisms like bacteria, mold fungus,
mildew etc. on concrete surfaces. Application top of plaster to be mixed in
mechanical mixer at 150 gm of fibers per bag of cement for CM 1:3, 175 gm for
CM 1:4 and 250 gms for CM 1:6 fibermesh stealth micro blocker shall confirm
to ASTM C-1116 type 111 4.1.3. - for CM 1:6, 12mm thick

15.102 Providing and mixing Harbourite 12 mm fine fibrillated 100% virgin Sqm
polypropylene fibers which should be free from reprocessed olefin materials
and specifically manufactured for use as cementitious micro reinforcement
application rate of 175 gms to 250 gms per bag of cement or 1.8 kg per cum in
the guinite/shotcret and designed to an optimum gradation for use as concrete
secondary reinforcement.

15.103 Providing external walls with texture finish using approved brand paint, applied Sqm
uniformly in three coats over one coat of primer including cost of all materials,
machineries, labour, transportation, loading and unloading, all lead and lift and
all other incidental charges including scaffolding and removing stains,
complete as per specifications.
15.104 Providing and finishing external walls in two coats over one coat of primer with Sqm
antifungal paint of approved brand and shade to give an even shade after
thoroughly brooming the surface to remove all dirt and loose powdered
material, free from mortar drops and other foreign matter cost of materials,
labour, complete as per specifications.
15.105 Providing textured paint of approved quality, colour and shade to wall surface Sqm
after cleaning and rubbing the wall surface with wire brush of medium size
emery stone to remove all the loosely adhering particles, the surface is then
cleaned with water and ensured that it is in line and level. The textured
material is then mixed with 40-50% of clean water until a homogeneous thick
slurry is formed, the slurry is left for 5-10 min, to react completely with
ingredients. The textured finish prepared as above is then applied to the wall
surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired
finish. The finished surface shall be applied with two coats of exterior apex
paint of approved shade. The rate includes providing and removing scaffolding,
all lead and lift and all other incidental charges etc., complete as per directions
of the Engineer-in-charge of the work.

15.106 Providing applying two coats of wall putty to inside plastered walls and ceiling Sqm
using white cement putty. Scrapping and levelling the surface using steel blade
and preparing the surface even and smooth by using different grade sand
papers, including cost of all materials, cost of labour and scaffolding etc.,
complete as per the specification. Area to be considered - (a) 100% for fresh
surface (b) Upto 10% for repainting
Basic Rate
142.00

140.00

143.00

141.00

207.00

204.00

45.00

47.00

214.00

206.00

196.00

237.00

224.00

211.00
280.00

264.00

248.00

293.00

276.00

258.00

238.00

227.00

7.00

5.00

7.00

8.00

9.00
 12.00

9.00

208.00

195.00

19.00

32.00

26.00

31.00

36.00

28.00

12.00

6.00

13.00

7.00
 11.00

102.00

15.00

8.00

35.00

3.00

73.00

6.00

20.00

2.00

14.00

110.00

8.00
 46.00

3.00

87.00

90.00

5.00

56.00

4.00

37.00

89.00

102.00

34.00

51.00
47.00

34.00

43.00

46.00

42.00

50.00

50.00

97.00

55.00

62.00

55.00

87.00
 45.00

51.00

45.00

202.00

107.00

93.00

47.00

60.00

40.00

33.00

56.00
50.00

41.00

95.00

61.00

74.00

48.00

46.00

40.00

37.00

85.00

55.00
 71.00

46.00

44.00

43.00

1,352.00

1,401.00

1,384.00
1,346.00

30.00

333.00

389.00

346.00

304.00

856.00

1,038.00

6.00
 5.00

4.50

5.50

12.00

25.00

16.00

22.00

14.00
19.00

14.00

40.00

27.00

35.00
 23.00

33.00

30.00

68.00

340.00

180.00
439.00

78.00
Item No. Description Unit
16.1.1 KSRB 24-1 : Removing white wash or colour wash by steel brushing and / or Sqm
scraping, sand papering and preparing wall surface smooth including repairs to
scraches, cost of labour, complete as per specifications. Specification No.KBS

16.1.2 KSRB 24-2 : Extra for removing white wash or colour wash by steel brushing Sqm
and / or scraping, sand papering the ceiling and / or sloping roof surface
smooth including repairs to scraches, cost of labour, complete as per
specifications.
16.1.3 KSRB 24-3 : Extra for washing the wall surface spoiled by smoke, soot, with Sqm
clear water before sand papering the surface smooth including necessary
repairs to scraches, cost of labour, complete as per specifications.

16.1.4 KSRB 24-4 : Extra for Item No. 24-3 washing the ceiling and / or sloping roof Sqm
surface spoiled by smoke soot with clear water before sand papering the
surface smooth and including necessary repairs to scraches, cost of labour,
complete as per specifications.
16.2.1 KSRB 24-5 : Cleaning and washing of decorated wall surface with soap, soda Sqm
and water including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.2.2 KSRB 24-6 : Extra for KSRB 24-5 cleaning and washing the old ceiling and / or Sqm
sloping roof with soap, soda and water including cost of materials, labour,
complete as per specifications.
16.3.1 KSRB 24-7 : Cleaning and washing the old plastered wall surface with soap, Sqm
soda, water including cost of materials, labour, complete as per specifications.

16.3.2 KSRB 24-8 : Extra for Item No. 24-7 cleaning and washing the old plastered Sqm
ceiling and / or sloping roof surface with soap, soda, water including cost of
materials, labour, complete as per specifications.
16.4 KSRB 24-9 : Cleaning and washing of stone masonry wall surface with nitric Sqm
acid including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.5 KSRB 24-10 : Removing the old paint or polish from wood and / or wood based Sqm
surface with paint remover of approved brand / manufacturer and making
surface even including cost of materials, labour, complete as per
specifications. Specification No.KBS
16.6 KSRB 24-11 : Removing the old paint or polish from wood and / or wood based Sqm
surface with caustic soda solution and making surface even including cost of
materials, labour, complete as per specifications. Specification No.KBS

16.7 KSRB 24-12 : Removing the old paint from wood and / or wood based surface Sqm
with blow lamp and making surface even including cost of materials, labour,
complete as per specifications. Specification No.KBS
16.8 KSRB 24-13 : Removing the old paint from steel and / or other metal surface Sqm
with hand scraping and making surface even including cost of labour, complete
as per specifications. Specification No.KBS
16.9 KSRB 24-14 : Removing the old paint from steel and / or other metal surface Sqm
with flame cleaning and making surface even including cost of material, labour,
complete as per specifications. Specification No.KBS
16.10 KSRB 24-15 : Removing the old paint from steel and / or other metal surface Sqm
with paint remover of approved brand / manufacturer cleaning and making
surface even including cost of material, labour, complete as per specifications.
Specification No.KBS
16.11 KSRB 24-16 : Fixing small pieces ( not exceeding 0.015 cum ) for making good Piece
wherever hinges etc., have been removed from frames or joinery etc., with
teak wood excluding cost of materials but including cost of labour, complete as
per specifications. Specification No.KBS
16.12 KSRB 24-17 : Providing and fixing small pieces ( not exceeding 0.015 cum ) Piece
for making good wherever hinges etc., have been removed from frames or
joinery etc., with honne wood including cost of materials, labour, complete as
per specifications. Specification No.KBS
16.13 KSRB 24-18 :Providing and fixing small pieces ( not exceeding 0.015 cum ) for Piece
making good wherever hinges etc., have been removed from frames or joinery
etc., with matti / nandi wood including cost of materials, labour, complete as
per specifications. Specification No.KBS
16.14 KSRB 24-19 : Providing and fixing small pieces ( not exceeding 0.015 cum ) Piece
for making good wherever hinges etc., have been removed from frames or
joinery etc., with Sal wood pieces ( not exceeding 0.015 cum ) including cost of
materials, labour, complete as per specifications. Specification No.KBS

16.15 KSRB 24-20 : Renewing bars, styles and rails, straight for joinery upto 50mm Piece
thick including mitres, haunching, mortices etc., and removing the old defective
pieces and replacing with Teak wood including cost of materials, labour,
complete as per specifications. Specification No.KBS
16.16 KSRB 24-21 :Renewing bars, styles and rails, straight for joinery upto 50mm Piece
thick including mitres, haunching, mortices etc., and removing the old defective
pieces and replacing with Honne wood including cost of materials, labour,
complete as per specifications. Specification No.KBS
16.17 KSRB 24-22 : Renewing bars, styles and rails, straight for joinery upto 50mm Piece
thick including mitres, haunching, mortices etc., and removing the old defective
pieces and replacing with Matti / Nandi woodincluding cost of materials, labour,
complete as per specifications. Specification No.KBS
16.18 KSRB 24-23 : Rewedging, cramping joinery of any description with new Leaf
wedges in glue or white lead and repinning including rehanging or refixing of
shutters, hinges or pivots, not exceeding one sqm per leaf, removing or
dismantling excluding cost of wood but including cost of labour, complete as
per specifications. Specification No.KBS
16.19 KSRB 24-24 :Rewedging, cramping joinery of any description with new Leaf
wedges in glue or white lead and repinning including rehanging or refixing of
shutters, hinges or pivots, not exceeding one sqm per leaf, removing or
dismantling excluding cost of wood but including cost of labour, complete as
per specifications. Specification No.KBS exceeding one sqm but not exceeding
two sqm per leaf

16.20 KSRB 24-25 : Rewedging, cramping joinery of any description with new Leaf
wedges in glue or white lead and repinning including rehanging or refixing of
shutters, hinges or pivots, not exceeding one sqm per leaf, removing or
dismantling excluding cost of wood but including cost of labour, complete as
per specifications. Specification No.KBS exceeding two sqm
16.21 KSRB 24-26 : Making repairs to joinery at angles with 300mm x 25mm x 3mm Each
length of MS flat forged to shape and let into wood work, counter sunk, drilled
and screwed including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.22 KSRB 24-27 : Renewing Honne wood battens in roof including making good cum
the holes in walls, removal of rubbish to the dumping round with a lead upto 50
m including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.23 KSRB 24-28 :Renewing Matti / Nandi wood battens in roof including making cum
good the holes in walls, removal of rubbish to the dumping round with a lead
upto 50 m including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.24 KSRB 24-29 :RenewingSal wood battens in roof including making good the cum
holes in walls, removal of rubbish to the dumping round with a lead upto 50 m
including cost of materials, labour, complete as per specifications. Specification
No.KBS
16.25 KSRB 24-30 : Removal of old broken glass panes ( any thickness of size, Sqm
quality or description ) from wooden frames, glazed with putty or fixed with
beads including cost of labour, complete as per specifications. Specification
No.KBS
16.26 KSRB 24-31 : Removal of old broken glass panes ( any thickness of size, Sqm
quality or description ) from metal frames, glazed with putty or fixed with beads
including cost of labour, complete as per specifications. Specification No.KBS

16.27 KSRB 24-32 : Removing serviceable glass of any description from old wood or Sqm
metal frames ( any thickness or size, quality or description ) hacking out old
putty etc., including risk and making good breakages in taking out and
handling, stacking within a lead of 50 m. including cost of labour, complete as
per specifications. Specification No.KBS
16.28 KSRB 24-33 : Supplying and fixing new teak wood beads wherever necessary M
including cost of materials, labour, complete as per specifications. Specification
No.KBS
16.29 KSRB 24-34 : Supplying and fixing new Honne wood beads wherever M
necessary including cost of materials, labour, complete as per specifications.
Specification No.KBS
16.30 KSRB 24-35 : Renewal of old putty of glass panes including cost of materials, M
labour, complete as per specifications. Specification No.KBS 24.2.6

16.31 KSRB 24-36 : Removing the glazed tiles in patches in area exceeding 10 tiles Sqm
and not exceeding 5 sqm including removing old tiles preparing surfaces and
laying or setting new or old tiles complete including cost of materials,
( excluding cost of tiles ) labour, complete as per specifications. Specification
No.KBS
16.32 KSRB 24-37 : Removing the mosaic tiles in patches in area exceeding 10 tiles Sqm
and not exceeding 5 sqm including removing old tiles preparing surfaces and
laying or setting new or old tiles complete including cost of materials,
( excluding cost of tiles ) labour, complete as per specifications. Specification
No.KBS
16.33 KSRB 24-38 : Cutting out cracks of roof terrace to V - section cleaning out, M
wetting, grouting with cement and sand slurry 1:3 (1 cement, 3 sand) including
cost of materials, labour, complete as per specifications. Specification No.KBS

16.34 KSRB 24-39 : Cutting out cracks of roof terrace to V - section cleaning out and Sqm
filling solidly with a hot mixure of bitumen and clean dry sand 1:1 by weight
including cost of materials, labour, complete as per specifications. Specification
No.KBS
16.35.1 KSRB 24-40 : Dubbing out on old irregular walls average 10mm thick and Sqm
making good the surface with cement mortar 1:3 including curing cost of
materials, labour, complete as per specifications. Specification No.KBS 24.2.1

16.35.2 KSRB 24-43 : Add from Item no. 24-40 for every 5mm thick increase after Sqm
10mm with respective mortars including curing cost of materials, labour,
complete as per specifications.
16.36.1 KSRB 24-41 : Dubbing out on old irregular walls average 10mm thick and Sqm
making good the surface with cement mortar 1:4 including curing cost of
materials, labour, complete as per specifications. Specification No.KBS 24.2.1

16.36.2 KSRB 24-43 : Add from Item no. 24-40, 24-41, 24-42 for every 5mm thick Sqm
increase after 10mm with respective mortars including curing cost of materials,
labour, complete as per specifications.
16.37.1 KSRB 24-42 : Dubbing out on old irregular walls average 10mm thick and Sqm
making good the surface with cement mortar 1:6 including curing cost of
materials, labour, complete as per specifications. Specification No.KBS 24.2.1

16.37.2 KSRB 24-43 : Add from Item no. 24-40, 24-41, 24-42 for every 5mm thick Sqm
increase after 10mm with respective mortars including curing cost of materials,
labour, complete as per specifications.
16.38 KSRB 24-44 : Repairs to plaster in patches of 2.5 sqm and less in walls, Sqm
ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in
proper shape and replastering the surface of the wall including disposal of
rubbish with a lead of 50m including curing cost of materials, labour, complete
as per specifications. Specification No.KBS 24.2.1
16.39 KSRB 24-45 : Repairs to plaster in patches of 2.5 sqm and less in walls, Sqm
ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in
proper shape and replastering the surface of the wall including disposal of
rubbish with a lead of 50m including curing cost of materials, labour, complete
as per specifications. Specification No.KBS 24.2.1
16.40 KSRB 24-46 : Repairs to plaster in patches of 2.5 sqm and less in walls, Sqm
ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in
proper shape and replastering the surface of the wall including disposal of
rubbish with a lead of 50m including curing cost of materials, labour, complete
as per specifications. Specification No.KBS 24.2.1
16.41 Removing of existing old or broken wash basin / urinals and disposing it with Each
all cost and conveyance labour for all items of work, HOM of equipment with all
lead and lift, loading and unloading, transportation charges and all other
incidental charges etc., complete as per specification and directions of the
Engineer-in-charge of the work.
16.42 Removing of existing old or broken Water closet Indian / Eurpoean and Each
disposing it with all cost and conveyance labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation charges
and all other incidental charges etc., complete as per specification and
directions of the Engineer-in-charge of the work.
16.43 Removing of existing old Sanitary and plumbing pipelines, stacking and M
disposing it with all cost and conveyance labour for all items of work, HOM of
equipment with all lead and lift, loading and unloading, transportation charges
and all other incidental charges etc., complete as per specification and
directions of the Engineer-in-charge of the work.
16.44 External sweeping and terrace cleaning - Cleaning of outer periphery like Sqm
roads footpaths curb stones terrace including removing grass dust etc., to the
nearest garbage pit using suitable coconut broomstic,bombay broomstick,
squezers /wipers / rubberbrushes, coir brushes, bamboo baskets, plastic
bukets mugs trolley etc., complete
16.45 Cleaning stone parapets removing of dirt dust etc., using suitrable soap Sqm
powder, coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes,
plastric brushjes, mugs, booster pumps with portable arrangement, hose pipe
etc., complete including cost of water charges and electrical charges.

16.46 Cleaning Quadrangle chajjas including removing of dirt dust etc., using Sqm
suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber
brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable
arrangement, hose pipe etc., complete excluding water charges including
electrical charges and all safety measures.
16.47 Cleaning sub surface drains including removing of dirt dust etc., using suitrable M
soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir
brushes, plastric brushjes, mugs, booster pumps with portable arrangement,
hose pipe etc., complete
16.48 Cleaning surface drains including removing of dirt dust etc., using suitrable M
soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir
brushes, plastric brushjes, mugs, booster pumps with portable arrangement,
hose pipe etc., complete.
16.49 Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage Sqm
units, furnitures,electrical & electronic equipments, doors, windows, curtains,
blinds etc., including cleaning of dust, etc., using suitable bombay broom stick,
squezers / wipers/rubber brushes, mop sticks, coir brushes, bamboo baskets,
plastic buckets, trolleys, wiping cloths, carry bags, etc.,removing the debris to
the nearest garbage pit complete.
Basic Rate
9.00

10.00

4.00

4.00

4.00

4.00

4.00

4.00

5.00

65.00

45.00

93.00

84.00

93.00

64.00

26.00
 155.00

115.00

106.00

915.00

454.00

347.00

577.00

766.00

1,082.00

114.00

12,416.00

9,929.00

9,501.00
124.00

175.00

179.00

37.00

32.00

36.00

806.00

621.00

64.00

67.00

174.00

50.00

158.00

46.00
141.00

42.00

296.00

279.00

263.00

321.00

296.00

99.00

1.00

1.00

11.00

13.00
8.00

2.00
Item No. Description Unit
17.1 KSRRB M100-1 Loading and Unloading of Stone Boulder / Stone cum
aggregates /Sand/ Kanker / Moorum. KSRRB M100-1 : Placing tipper at
loading point, loading with front end loader,dumping, turning for return trip,
excluding time for haulage and return trip complete as per specifications.
MORTH -100/ Chapter 1
17.2 KSRRB M100-2. Loading and Unloading of Stone Boulders by Manual Means cum
complete as per specifications. MORTH -100/ Chapter 1
17.3 KSRRB M100-3 Loading and Unloading of Cement or Steel by Manual Means Tonne
and as per specifications complete MORTH -100/ Chapter 1
17.4 KSRRB M100-4.1. Cost of Haulage Excluding Loading and Unloading MORTH t.km
-100/ Chapter 1 Case-I : Surface Road
17.5 KSRRB M100-4.2. Haulage of materials by tipper excluding cost of loading, t.km
unloading and stacking complete as per specifications. MORTH -100/ Chapter
1 Case-II : Unsurfaced Gravelled Road
17.6 KSRRB M100-4.3. Haulage of materials by tipper excluding cost of loading, t.km
unloading and stacking complete as per specifications.MORTH Chapter 1
Case-III : Katcha Track and Track in River Bed/Nallah Bed and Choe Bed

17.7 KSRRB M100-5. Supply of quarried stone, hand breaking into coarse cum
aggregate 63mm nominal size (passing 80 mm and retained on 50 mm sieve)
and stacking as directed complete as per specifications. MORTH -100/
Chapter 1
17.8 KSRRB M100-6. Crushing of stone boulders of 150 mm size in an integrated cum
stone crushing unit of 200 tonnes per hour capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to obtain stone
aggregates of 13.2 mm nominal size complete. MORTH -100/ Chapter 1

17.9 KSRRB M100-7. Crushing of stone boulders of 150 mm size in an integrated cum
stone crushing unit of 200 tonnes per hour capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to obtain stone
aggregates of 20 mm nominal size complete. MORTH -100/ Chapter 1

17.10 KSRRB M100-8. Crushing of stone boulders of 150 mm size in an integrated cum
stone crushing unit of 200 tonnes per hour capacity comprising of primary and
secondary crushing units, belt conveyor and vibrating screens to obtain stone
aggregates of 40mm nominal size complete. MORTH -100/ Chapter 1
Basic Rate
57.00

111.00

152.00

2.00

2.00

4.00

661.00

798.00

803.00

717.00
Item No. Description Unit
18.1 KSRRB 200-1. Cutting of trees girth from 300mm to 600mm including cutting Each
of trunks, branches and removal of stumps stacking of serviceable materials
earth filling in the depressions / pit, labour charges complete as per
specifications. MORTH specification clause 201/ Chapter 2
18.2 KSRRB 200-2. Cutting of trees girth from 600mm to 900mm including cutting Each
of trunks, branches and removal of stumps stacking of serviceable materials
earth filling in the depressions / pit, labour charges complete as per
specifications. MORTH specification clause 201/ Chapter 2
18.3 KSRRB 200-3. Cutting of trees girth from 900mm to 1800mm including cutting Each
of trunks, branches and removal of stumps stacking of serviceable materials
earth filling in the depressions / pit, labour charges complete as per
specifications. MORTH specification clause 201/ Chapter 2
18.4 KSRRB 200-4. Cutting of trees girth from 1800mm to 2700mm including Each
cutting of trunks, branches and removal of stumps stacking of serviceable
materials earth filling in the depressions / pit, labour charges complete as per
specifications. MORTH specification clause 201/ Chapter 2
18.5 KSRRB 200-5. Cutting of trees girth from 2700mmto 3600mm including cutting Each
of trunks, branches and removal of stumps stacking of serviceable materials
earth filling in the depressions / pit, labour charges complete as per
specifications. MORTH specification clause 201/ Chapter 2
18.6 KSRRB M200-6.1 Cutting of trees girth from 300mm to 600mm including Each
cutting of trunks, branches and removal of stumps stacking of serviceable
materials with all lifts earth filling in the depressions / pit, complete as per
specifications. MORTH Specification No. 201
18.7 KSRRB M200-6.2 Cutting of trees girth from 600mm to 900mm including Each
cutting of trunks, branches and removal of stumps stacking of serviceable
materials with all lifts earth filling in the depressions / pit, complete as per
specifications. MORTH Specification No. 201
18.8 KSRRB M200-6.3 Cutting of trees girth from 900mm to 1800mm including Each
cutting of trunks, branches and removal of stumps stacking of serviceable
materials with all lifts earth filling in the depressions / pit, complete as per
specifications. MORTH Specification No. 201
18.9 KSRRB M200-6.4 Cutting of trees girth from 1800mm to 2700mm including Each
cutting of trunks, branches and removal of stumps stacking of serviceable
materials with all lifts earth filling in the depressions / pit, complete as per
specifications. MORTH Specification No. 201
18.10 KSRRB M200-7.1. Clearing grass and removal of rubbish by manual means Ha
and stacking outside the periphery of the area cleaned complete as per
specifications. MORTH Specification No. 201
18.11 KSRRB 200-8. Clearing and grubbing road land including uprooting rank Sqm
vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, by
manual means, in area of light jungle, removal of stumps, disposal of
unserviceable materials, stacking of serviceable materials labour charges
complete as per specifications. MORTH / Chapter 2
18.12 KSRRB 200-9. Clearing and grubbing road land including uprooting rank Sqm
vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, by
manual means, in area of thorney jungle, removal of stumps, disposal of
unserviceable materials, stacking of serviceable materials labour charges
complete as per specifications. MORTH / Chapter 2
18.13 KSRRB M200-10.1. Clearing and grubbing road land including uprooting rank Ha
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm,
removaL of stumps of trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, including removal
and disposal of top organic soil not exceeding 150 mm in thickness complete
as per specifications. I. By Manual Means: A. In area of light jungle. MORTH
Specification No. 201
18.14 KSRRB M200-10.2. Clearing and grubbing road land including uprooting rank Ha
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm,
removaL of stumps of trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, including removal
and disposal of top organic soil not exceeding 150 mm in thickness complete
as per specifications. I. By Manual Means:B. In area of thorny jungle.

18.15 KSRRB M200-11.1. Clearing and grubbing road land including uprooting rank Ha
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm,
removalof stumps of trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, including removal
and disposal of top organic soil not exceeding 150 mm in thickness complete
as per specifications . II. By Mechanical Means:A. In area of light jungle.
MORTH Specification No. 201

18.16 KSRRB M200-11.2. Clearing and grubbing road land including uprooting rank Ha
vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm,
removalof stumps of trees cut earlier and disposal of unserviceable materials
and stacking of serviceable material to be used or auctioned, including removal
and disposal of top organic soil not exceeding 150 mm in thickness complete
as per specifications .II. By Mechanical Means:B. In area of thorny jungle

18.17 KSRRB M200-12.1. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. i)
Lime /Cement Concrete. I. By Manual Means :A. Lime Concrete, cement
concrete grade M-10 and below. MORTH Specification No. 202

18.18 KSRRB M200-12.2. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. i)
Lime /Cement Concrete. I. By Manual Means :B. Cement Concrete Grade M-
15 & M-20. MORTH Specification No. 202

18.19 KSRRB M200-12.3. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. C.
Prestressed / Reinforced cement concrete grade M-20 & above. MORTH
Specification No. 202

18.20 KSRRB M200-13.1. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. II.
By Mechanical Means. A. Cement Concrete Grade M-15 &M-20. MORTH
Specification No. 202
18.21 KSRRB M200-13.2. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
II.By Mechanical Means. MORTH Specification No. 202

18.22 KSRRB M200-14.1. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. ii)
Dismantling Brick / Tile work. A. In lime mortar. MORTH Specification No. 202

18.23 KSRRB M200-14.2. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. ii)
Dismantling brick/Tile work B. In cement mortar. MORTH Specification No. 202

18.24 KSRRB M200-14.3. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. ii)
Dismantling brick/Tile work C. In mud mortar.MORTH Specification No. 202

18.25 KSRRB M200-14.4. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. ii)
Dismantling brick/Tile work D. Dry brick pitching or brick soling. MORTH
Specification No. 202

18.26 KSRRB M200-15.1. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. iii)
Dismantling Stone Masonry. A. Rubble Stone masonry in lime mortar. MORTH
Specification No. 202

18.27 KSRRB M200-15.2. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. iii)
Dismantling Stone Masonry.B. Rubble stone masonry in cement mortar.
MORTH Specification No. 202

18.28 KSRRB M200-15.3. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. iii)
Dismantling Stone Masonry C. Rubble stone masonry in mud mortar. MORTH
Specification No. 202
18.29 KSRRB M200-15.4. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. iii)
Dismantling Stone Masonry D. Dry rubble masonry. MORTH Specification No.
202

18.30 KSRRB M200-15.5. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. iii)
Dismantling Stone MasonryE. Dismantling stone pitching / dry stone spalls.
MORTH Specification No. 202

18.31 KSRRB M200-15.6.Dismantling of existing structures like culverts, bridges, cum

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
Dismantling brick/Tile work F. Dismantling Boulders laid in wire crates including
opening of crates and stacking dismantled materials.

18.32 KSRRB M200-16.Dismantling of existing structures like culverts, bridges, cum

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. iv)
Dismantling wood work wrought framed and fixed in frames of trusses upto a
Height of 5m above Plinth Level.

18.33 “KSRRB M200-17.1. Dismantling of existing structures like culverts, bridges, Tonne
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. v)
Steel work in all types of Sections upto a Height of 5 m above plinth level
excluding Cutting of Rivet. – A. Including dismembering.”

18.34 KSRRB M200-17.2. Dismantling of existing structures like culverts, bridges, Tonne
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
v)Steel work in all types of Sections upto a Height of 5 m above plinth level
excluding Cutting of Rivet– B. Excluding dismembering.

18.35 Dismantling of existing structures like culverts, bridges, retaining walls and RIVET
other structure comprising of masonry, cement concrete, wood work, steel
work, including T&P and scaffolding wherever necessary, sorting the
dismantled material, disposal of unserviceable material and stacking the
serviceable material with all lifts complete as per specifications. B for cutting
rivets.
18.36 KSRRB M200-18.1. Dismantling of existing structures like culverts, bridges, Nos
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. vi)
Scraping of Bricks Dismantled from Brick work including Stacking - A. In Lime /
Cement mortar.

18.37 KSRRB M200-18.2. Dismantling of existing structures like culverts, bridges, Nos
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. B.
In mud mortar.

18.38 KSRRB M200-19.1. Dismantling of existing structures like culverts, bridges, cum
retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
vii) Scraping of stones from dismantled stone masonry – A. In cement and lime
mortar.

18.39 KSRRB M200-19.2.Dismantling of existing structures like culverts, bridges, cum

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. B.
In mud mortar.

18.40 KSRRB M200-20.Dismantling of existing structures like culverts, bridges, Sqm

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
viii) Scraping plaster in lime or cement mortar from brick / stone masonry.

18.41 KSRRB M200-21.1. Dismantling of existing structures like culverts, bridges, M

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications. ix)
Removal of all types of Hume pipes and stacking including earthwork and
dismantling of masonry works – A. Upto 600 mm dia

18.42 KSRRB M200-21.2. Dismantling of existing structures like culverts, bridges, M

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
Removal of all types of Hume pipes and stacking including earthwork and
dismantling of masonry works – B. Above 600 mm to 900 mm dia.

18.43 KSRRB M200-21.3. Dismantling of existing structures like culverts, bridges, M

retaining walls and other structure comprising of masonry, cement concrete,
wood work, steel work, including T&P and scaffolding wherever necessary,
sorting the dismantled material, disposal of unserviceable material and
stacking the serviceable material with all lifts complete as per specifications.
Removal of all types of Hume pipes and stacking including earthwork and
dismantling of masonry works C. Above 900 mm dia.
18.47 KSRRB M200-24. Dismantling of cement concrete pavement by mechanical cum
means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in
volume and stock piling at designated locations and disposal of dismantled
materials stacking serviceable and unserviceable materials seperately
complete as per specifications. MORTH Specification No. 202

18.48 KSRRB M200-25. Dismantling of guard rails by manual means and disposal of M
dismantled materials with all lifts and stacking serviceable materials and
unserviceable materials seperately complete as per specifications. MORTH
Specification No. 202
18.49 KSRRB M200-26. Dismantling Kerb stone by manual means and disposal of M
dismantled materials with all lifts and complete as per specifications. MORTH
Specification No. 202
18.50 KSRRB M200-27. Dismantling of Kerb stone channel by manual means M
including and disposal of dismantled material with all lifts and complete as per
specifications. MORTH Specification No. 202
18.51 KSRRB M200-28.1. Dismantling of kilometre stone including cutting of earth, Each
foundation and disposal of dismantled material with all lifts and back filling of
pit complete as per specifications. A. 5th KM stone ( quantity of cement
concrete = 0.392 cum). MORTH Specification No. 202
18.52 KSRRB M200-28.2.Dismantling of kilometre stone including cutting of earth, Each
foundation and disposal of dismantled material with all lifts and back filling of
pit complete as per specifications B. Ordinary KM stone ( quantity of cement
concrete = 0.269 cum ).
18.53 KSRRB M200-28.3. Dismantling of kilometre stone including cutting of earth, Each
foundation and disposal of dismantled material with all lifts and back filling of
pit complete as per specifications C. Hectometer stone ( quantity of cement
concrete = 0.048 cum ].
18.54 KSRRB M200-29. Dismantling of barbed wire fencing / wire mesh fencing M
including posts, foundation concrete, back filling of pit by manual means
including disposal of dismantled material with all lifts and stacking serviceable
material and unserviceable material separately complete as per specifications.
MORTH Specification No. 202
18.55 KSRRB M200-30. Dismantling of CI water pipe line 600 mm dia including M
disposal with all lifts and stacking of serviceable material and unserviceable
material separately under supervision of concerned department complete as
per specifications. MORTH Specification No. 202
18.56 KSRRB M200-31. Removal of cement concrete pipe of sewer gutter 1500 mm M
dia under the supervision of concerned department including disposal with all
lifts and stacking of serviceable and unserviceable material separately but
excluding earth excavation and dismantling of masonry works complete as per
specifications. MORTH Specification No. 202
18.57 KSRRB M200-32. Removal of Telephone / Electric poles including excavation Nos
and dismantling of foundation concrete and lines under the supervision of
concerned department, disposal with all lifts and stacking the serviceable and
unserviceable material separatelycomplete as per specifications. MORTH
Specification No. 202
Basic Rate
299.00

922.00

2,243.00

3,489.00

6,977.00

543.00

1,031.00

2,360.00

7,149.00

25,755.00

10.00

15.00

77,458.00
103,406.00

18,526.00

22,907.00

454.00

557.00

1,589.00

390.00
739.00

248.00

351.00

207.00

186.00

289.00

351.00

248.00
 227.00

207.00

248.00

665.00

1,893.00

1,426.00

14.00
 2.00

1.00

723.00

153.00

21.00

267.00

362.00

619.00
899.00

87.00

12.00

18.00

469.00

277.00

55.00

66.00

137.00

168.00

217.00
Item No. Description Unit
KSRRB 300 - Excavation for road, drains and similar works KSRRB 300-1. cum
Earthwork excavation by manual means in ordinary soil involving an average
horizontal throw upto 2 meters and an average lift upto 0.5 m, excavated
19.1
surface leveled and sides neatly dressed, the disposed earth to be leveled
neatly after breaking of clods complete as per specifications. MORTH /
Chapter 3
KSRRB 300-2. Earthwork excavation by manual means in hard soil involving cum
an average horizontal throw upto 2 meters and an average lift upto 0.5 m,
19.2 excavated surface leveled and sides neatly dressed, the disposed earth to be
leveled neatly after breaking of clods complete as per specifications. MORTH /
Chapter 3
cum
KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains &
similar works in all types soils involving an average horizontal through upto 2
19.2.1 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and
sides neatly dressed, the disposed earth to be levelled neatly after breaking of
clods complete as per specifications. MORTH I Chapter 3

cum
KSRRB 300-3. Earthwork excavation and forming in embankment by manual
means in all types of soils (When earth is taken from bank cutting or from soil
19.3 deposits) including breaking of clods, spreading to required line and level,
forming, and cost of all labour complete as per specifications. ( excluding
watering and compaction of earth ) (with all lead and lift) MORTH I Chapter 3

KSRRB 300-5. Excavation in soft rock with blasting for formation of roads cum
including stacking neatly, to uniform line and level including cost of explosives,
19.5
labour, HOM of machineries and equipments complete as per specifications.
(with all lead and lift) MORTH / Chapter 3
KSRRB 300-6. Excavation in soft rock I ordinary rock without blasting for cum
formation of roads including stacking neatly, to uniform line and level with an
19.6
initial lead upto 15m. including cost of all labour, equipments, complete as per
specifications.
KSRRB 300-7. Excavation in hard rock by blasting for formation of roads cum
including stacking to uniform line and level as directed by the engineer
19.7
including cost of explosives, labour, HOM complete as per specifications. (with
all lead and lift) MORTH I Chapter 3
KSRRB 300-8. Excavation in hard rock by chiselling and I or wedging where cum
blasting is prohibited for formation of roads including stacking to uniform line
19.8
and level including cost of all labour complete as per specifications. (with all
lead and lift) MORTH I Chapter 3
KSRRB M300-13. Excavation for roadway in hard rock (requiring blasting) by cum
drilling, blasting and breaking, trimming of bottom and side slopes in
accordance with requirements of lines, grades and cross sections, loading and
19.13
stacking at site of cut road with a lead of 1.00 km and complete as per
specifications. (Excavated rock credited to contractor) MORTH Specification
No. 301
KSRRB M300-14. Excavation for roadwork in all types of soil by mechanical cum
means including cutting and loading to tippers, trimming bottom and side
19.14 slopes, in accordance with requirements of lines, grades and cross sections,
and transportation with a lead of 1.00 km and complete as per specifications.
MORTH Specification No.301
 cum
Excavation in Ordinary Rock using Hydraulic Excavator CK-90 and Tippers
with Disposal KSRRB M300-15. Excavation for roadway in ordinary rock with
hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in
19.15
tippers, transporting to embankment site and trimming bottom and side slopes
in accordance with requirements of lines, grades and cross sections complete
as per specifications. MORTH Specification No. 301

KSRRB M300-16.1. Excavation for roadway in hard rock by mechanical means cum
(blasting prohibited) including breaking rock, loading in tippers and disposing
19.16 with all lead and lifts trimming bottom and side slopes in accordance with
requirements of lines, grades and cross sections complete as per
specifications. MORTH Specification No. 301
KSRRB M300-16.2. Excavation for roadway in hard rock by manual means cum
(blasting prohibited) including breaking rock, loading in tippers and disposal
19.17 with all lead and lifts trimming bottom and side slopes in accordance with
requirements of lines, grades and cross sections complete as per
specifications. MORTH Specification No. 301
KSRRB M300-17. Excavation for road way in hard rock ( controlled blasting) cum
with rock breakers including breaking rock, loading to tippers transporting and
19.18 stacking at site and trimming bottom and side slopes in accordance with
requirement of lines, grades and cross sections complete as per specifications.
MORTH Specification No. 301
KSRRB M300-18. Earth work Excavation for road way in marshy soil by cum
mechanical means including loading to tippers and disposing with a lead of
19.19
1.00 km including the cost of equipments, machineries, labour etc. complete as
per specifications.
KSRRB M300-19. Removal of unserviceable soil including excavation, loading cum
and disposal but excluding replacement by suitable soil which shall be paid
19.20
separately as per clause 300.5 complete as per specifications. MORTH
Specification No. 301
cum
KSRRB 300-26.1. Extra for every additional lead of 7.50 mtr. beyond 15m but
19.30 upto 60m by manual means for all kinds of soils except hard rock including
cost of all labour complete as per specifications. MORTH Chapter 3

KSRRB 300-26.2. When lead is more than 60m upto 500m by any means of cum
conveyance including loading and unloading for all kinds of soils except hard
19.31
rock including cost of all labour complete as per specifications. MORTH
Chapter 3
Sqm
KSRRB 300-28. Box cutting I trenching the sub grade to proper slope, camber
and removing inequalities including removing the stuff and depositing on the
19.33 road side slopes (cutting of earthwork shall be paid seperately in the respective
item on the basis of classification of the excavation) including cost of all labour
complete as per specifications. MORTH Chapter 3

KSRRB M300- Turfing with Sods/Seeding and Mulching Providing and laying Sqm
live sods for turfing on embankment. slopes, verges or other locations over
19.36 20mm thick sand backing including cost of all materials, machinery and labour
and including the surface preparation, spreading sand, tamping, watering for
15 days. Complete with all lead and lifts.

KSRRB M300-36. Construction sub-surface drain with perforated pipe of 100 M

mm internal diameter of metal I asbestos cement I cement concrete I PVC,
closely jointed, perforations ranging from 3mm to 6mm depending upon size of
19.42 crushed stone material surrounding the pipe, with 150mm bedding below the
pipe and 300mm cusion above the pipe, cross-section of excavation
450x550mm. Excavated material to be utilised in roadway at site complete as
per specifications. MORTH Specification No. 309
 KSRRB M300-37. Construction of sub-surface drain 300mm x 450mm with M
crushed stone aggregates conforming to Table 300-4, excavated material to be
19.43
utilised in roadway complete as per specifications. MORTH Specification No.
309
Construction of coverd drain 1m x 1m (inside dimension) with RCC M20 grade M
1Ocm thick for walls and floor, laid over 1Ocm thick 1 :3:6 PCC bed and
19.44 covered with M30 grade RCC slab of 15cm thick excluding earth work
including reinforcement @ 35 kglrmt and form work complete as per
specifications. MORTH 309
KSRRB M300-39. Preparation and Surface Treatment of Formation by Sqm
removing mud and slurry, watering to the extent needed to maintain the
19.45 desired moisture content, trimming to the required line, grade, profile and
rolling with 8-10 tonne smooth sheeled roller, complete as per Clause 310.
complete as per specifications. MORTH Specification No. 310
KSRRB M300-40. Excavation in all types of soils in hilly areas by mechanical cum
means including cutting and trimming of side slopes and disposing of
19.46
excavated earth and complete as per specifications. MORTH Specification No.
301
KSRRB M300-41. Excavation in hilly area in ordinary rock not requiring cum
blasting by mechanical means including cutting and trimming of slopes and
19.47
disposal of cut material and complete as per specifications. MORTH
Specification No. 301
KSRRB M300-42. Excavation in hilly area in hard rock requiring blasting by cum
19.48 mechanical means including trimming of slopes and disposal of cut material
and complete as per specification. MORTH Specification No. 301
KSRRB 300-45. Scarifying by manual means stone metal crust 50mm to Sqm
100mm thick along with premix carpet I surface dressing and stacking of old
19.51
serviceable materials including cost of all labour charges complete as per
specifications. MORTH I Chapter 3
KSRRB 300-46. Scarifying by mechanical means stone metal crust 50mm to Sqm
100mm thick by along with 20mm premix carpet I surface dressing and
19.52
stacking of old serviceable materials including cost of all labour charges, HOM
complete as per specifications. MORTH I Chapter 3
KSRRB 300-47. Scarifying kankar I gravel/ metal crust by manual means upto Sqm
19.53 150mm thick and disposal of stuff including cost of all labour charges complete
as per specifications. MORTH I Chapter 3
KSRRB 300-48. Scarifying kankar I gravel/ metal crust by mechanical means Sqm
19.54 upto 150mm thick disposal of stuff including cost of all labour charges, HOM
complete as per specifications. MORTH I Chapter 3
KSRRB 300-49. Scarifying bituminous course 50mm to 75mm thick along with Sqm
premix carpet I surface dressing by manual means without disturbing the base
19.55
and stacking of the debris materials including cost of all labour charges
complete as per specifications. MORTH I Chapter 3
Sqm
KSRRB 300-50. Scarifying bituminous course 50mm to 75mm thick along with
premix carpet I surface dressing by mechanical means attached with scarifier
19.56
without disturbing the base and stacking the debris including cost of all labour
charges, HOM complete as per specifications. MORTH I Chapter 3

Sqm
KSRRB 300-51. Making 50mm x 50mm furrows at 450 to the centre line of the
road and at one metre interval in the existing thin bituminous wearing course
19.57
including sweeping, taking out old materials, stacking the debris cost of all
labour charges complete as per specifications. MORTH / Chapter 3

KSRRB M300- Scarifying Existing Granular Surface to a Depth of 50mm by Sqm

Manual Means. KSRRB M300-52.1. Scarifying the existing granular road
19.58
surface to a depth of 50mm and disposal of scarified material and complete as
per specifications. MORTH Specification No. 305.4.3
 KSRRB M300-52.2. Scarifying Existing Bituminous surface to a depth of 50mm Sqm
by Mechanical Means. Scarifying the existing bituminous road surface to a
19.59
depth of 50mm and disposal of scarified material and complete as per
specifications. MORTH Specification No. 305.4.3
KSRRB M300- Construction of Embankment with Material Gravel/ Murrum. cum
KSRRB M300-53. Construction of embankment with approved material
Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading
19.60 to required slope and compacting to meet requirement Table 300- 2 complete
as per specifications.(Including cost of gravel / murrum, watering charges &
compaction by vibratory roller to 95% of proctors density) MORTH
Specification No. 305

KSRRB M300-Construction of Embankment with Material deposited from cum

Roadway cutting. KSRRB M300-54. Construction of embankment with
approved material deposited at site from roadway cutting and excavation from
19.61 drain and foundation of other structures graded and compacted to meet
requirement of Table 300-2 complete asper specifications.which includes ,
watering charges & compaction by vibratory roller) MORTH Specification No.
305

KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB cum

M300-55. Construction of sub-grade and earthen shoulders with approved
material Gravel/Murrum with all lifts & leads, transporting to site, spreading,
19.62 grading to required slope and compacted to meet requirement of Table No.
300-2 complete as per specifications (including cost of earth, watering charges
& compaction by vibratory rollercompaction by vibratory roller to 97% of
proctors density) MORTH Specification No. 305
cum
KSRRB M300-Construction of Rockfill Embankment. KSRRB M300-56.
Construction of rockfill embankment with availabel broken hard rock fragments
of size not exceeding 300mm laid in layers not exceeding 500mm thick
19.63
including filling of surface voids with stone spalls, blinding top layer with
granular material, rolled with vibratory road roller, all complete as per Clause
313 complete as per specifications. MORTH Specification No. 313

KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with Sqm

maximum of 6 passes of 8 to 10 tonnes power roller including filling in
19.64
depression occuring during rolling including cost of all labour, HOM of
machinery complete as per specifications. MORTH / Chapter 3
Sqm
KSRRB M300-59.2. Loosening, levelling and compacting origial ground
supporting embankment to facilitate placement of first layer of embankment,
scarified to a depth of 150mm, mixed with water at OMC and then compacted
19.66 by rolling so as to achieve minimum dry density as given in Table 300-2 for
embankment construction. complete as per specifications. Case-II:
Compacting original ground supporting embankment.(which includes watering
charges & compaction by vibratory roller) MORTH Specification No. 305.3.4

KSRRB 300-60. Extra for laying earth by manual means as per specifications cum
for compaction in 250mm thick loose layers when laying of earth in layers is
19.67 done simultaneously with excavation of earth work and dressing but excluding
rolling and watering including cost of all labour complete as per specifications.
MORTH / Chapter 3
KSRRB 300-61. Extra for laying earth by manual means as per specifications cum
for compaction in 250mm thick loose layers when laying of earth in layers is
19.68 done from stacked materials including breaking of clods and dressing but
excluding rolling and watering including cost of all labour complete as per
specifications. MORTH / Chapter 3
 KSRRB 300-62. Extra for laying earth by mechanical means as per cum
specifications for compaction in 250mm thick loose layers when laying of earth
19.69 in layers is done from stacked materials including breaking of clods and
dressing but excluding rolling and watering including cost of all labour, HOM of
machineries complete as per specifications. MORTH / Chapter 3

KSRRB M300-63. Construction of Embankment with Flyash / Pond Ash cum

available from Coal or Lignite Burning Thermal Plants as Waste Material.
Construction of embankment with flyash conforming to Table 1 of IRC:SP:58-
19.70 2001 obtained from coal or lignite burning thermal power stations as waste
material, spread and compacted in layer of 200mm thickness each at OMC, all
as specified in IRC:SP:58-2001 and as per approved plans complete as per
specifications.
KSRRB 300-64.1. Extra for watering the earth to bring the earth upto required cum
19.71 optimum moisture content manually including cost of all labour complete as per
specifications. MORTH / Chapter 3
cum
KSRRB 300-64.2. Extra for watering the earth to bring the earth upto required
19.72 optimum moisture content with mechinery including cost of all labour, HOM of
machineries complete as per specifications. MORTH / Chapter 3

cum
KSRRB 300-65. Extra for rolling to specification with the use of vibratory roller
when earth is at suitable moisture content with desired field density not less
19.73
than 95% of maximum dry density ( modified heavy proctor test ) including
HOM of machineries complete as per specifications. MORTH / Chapter 3

KSRRB M300-Horticulture KSRRB M300-Spreading of sludge farm yard cum

manure or/ and good earth KSRRB M300-1. Spreading of sludge farm yard
19.77 manure or/ and good earth in required thickness (cost of sludge, farm yard
manure or/and good earth to be paid for separately) complete as per
specifications. MORTH Specification No. 307
Sqm
KSRRB M300- Grassing with Doobs grass KSRRB M300- 2.1. Grassing with
Doobs grass including watering and maintenance of the lawn for 30 days or
19.78 more till the grass forms a thick lawn free from weeds and fit for moving
including supplying good earth if needed complete as per specifications.
MORTH Specification No. 307 i) In rows 15 cm apart in either direction.

Sqm
KSRRB M300-2.2. Grassing with Doobs grass KSRRB M300- 2.1. Grassing
with Doobs grass including watering and maintenance of the lawn for 30 days
19.79 or more till the grass forms a thick lawn free from weeds and fit for moving
including supplying good earth if needed complete as per specifications.
MORTH Specification No. 307 ii) In rows 7.5 cm apart in either direction

KSRRB M300-Making lawns including ploughing and dradding with ‘swagha’ Sqm
breaking of clod KSRRB M300-3. Making lawns including ploughing and
breaking of clod, removal of rubbish, dressing and supplying doobs grass roots
19.80
and planting at 15 cm apart, including supplying and spreading of farm yard
manure at rate of 0.18 cum per 100 sqm complete as per specifiifications.
MORTH Specification No. 307
Sqm
KSRRB M300- Maintenance of lawns or Turfing KSRRB M300-4.Maintenance
19.81 of lawns or Turfing of slopes (rough grassing) for a period of one year including
watering etc complete as per specifications. MORTH Specification No. 307

KSRRB M300-Turfing lawns with fine grassing including ploughing, dressing Sqm
KSRRB M300-5. Turfing lawns with fine grassing including ploughing, dressing
including breaking of clods, removal of rubbish, dressing and supplying doobs
19.82
grass roots at 10 cm apart, including supplying and spreading of farm yard
manure at rate of 0.6 cum per 100 sqm complete as per specifications.
MORTH Specification No. 307
 KSRRB M300- Maintenance of lawns with fine grassing for the first year Sqm
KSRRB M300-6. Maintenance of lawns with fine grassing for the first year
19.83
including watering etc complete as per specifications. MORTH Specification
No. 307
M
KSRRB M300- Planting and maintenance permanent hedges KSRRB M300-
7.1. Planting permanent hedges including digging of trenches, 60 cm wide and
45 cm deep, refilling the excavated earth mixed with farmyard manure,
19.84
supplied at the rate of 4.65 cum per 100 metres and supplying and planting
hedge plants at 30 cm apart complete as per specifications. A) Planting
permanent hedges including digging of trenches MORTH Specification No. 307

“KSRRB M300-7.2. Planting and maintenance permanent hedges KSRRB M

M300-7.1. Planting permanent hedges including digging of trenches, 60 cm
wide and 45 cm deep, refilling the excavated earth mixed with farmyard
19.85
manure, supplied at the rate of 4.65 cum per 100 metres and supplying and
planting hedge plants at 30 cm apart complete as per specifications. B)
Maintenance of hedge for one year
KSRRB M300- Planting and Maintaining of Flowering Plants and Shrubs M
KSRRB M300- 8.1. Planting and Maintaining of Flowering Plants and Shrubs -
19.86
A) Planting flowring plants and shrubs in central verge MORTH Specification
No. 307
Km
KSRRB M300- 8.2. Planting and Maintaining of Flowering Plants and Shrubs
19.87 KSRRB M300- 8.1. Planting and Maintaining of Flowering Plants and Shrubs
B) Maintenance of flowering plants and shrubs in central verge for one year.

KSRRB M300- Planting of trees and their maintenance for one year KSRRB Each
M300-9. Planting of trees by the road side (Avenue trees) in 0.60 m dia holes,
1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge
19.88
manure, planting the saplings, backfilling the trench, watering, fixing the tree
guard and maintaining the plants for one year complete as per specifications.
MORTH Specification No. 307
Sqm
KSRRB M300-Renovation lawns including, weeding, forking the ground, top
dressing with forked soil KSRRB M300-10. Renovation lawns including,
weeding, forking the ground, top dressing with forked soil, watering and
maintenance the lawns, for 30 days or more, till the grass forms a thick lawn,
19.89
free from weeds, and fit for moving and disposal of rubbish as directed,
including supplying good earth, if needed but excluding the cost of well
decayed farmyard namure complete as per specifications. MORTH
Specification No. 308
cum
KSRRB M300-Supply at site of work well decayed farm yard manure KSRRB
M300-11. Supply at site of work well decayed farm yard manure, from any
19.90
available source, approved by the engineer in charge including screening and
stackin complete as per specifications. MORTH Specification No. 308.2

Quintal
KSRRB 300-Supply at site of work/ store-deoiled neem cake KSRRB 300-12.
19.91 Supply at site of work/ store-deoiled neem cake duly packed in used gunny
bags complete as per specifications. MORTH Specification No. 308.2

KSRRB M300-Supplying sludge KSRRB M300-13. Supplying sludge duly cum

19.92 stacked at site/store complete as per specifications. MORTH Specification No.
308.2
KSRRB M300- Half brick circular tree guard KSRRB M300-14. Half brick Each
circular tree guard, in 2nd class brick, internal diametre 1.25 metres, and
height 1.2 metres, above ground and 0.20 metre below ground, bottom two
19.93
courses laid dry, and top three courses in cement mortar 1:6 (1 cement 6 sand)
and the intermediate courses being in dry honey comb masonry, as per design
complete, complete as per specifications.
 M
KSRRB M300-Edging with 2nd class bricks, laid dry lengthwise KSRRB M300-
15. Edging with 2nd class bricks, laid dry lengthwise, including excavation,
19.94
refilling, consolidation, with a hand packing and spreading nearly surplus earth
within a lead of 50 metres complete as per specifications.

Each
KSRRB M300- Making tree guard from empty bitumen drums KSRRB M300-
16. Making tree guard 53 cm dia and 1.3 m high as per design from empty
19.95 bitumen drum, slit suitably to permit sun and air, (supplied by the department at
stock issue rate) including providing and fixing 2 nos MS sheet rings 50 x 0.5
mm with rivets, complete in all respect complete as per specifications.

KSRRB M300-17. Making tree guard 53 cm dia and 2 metres high as per Each
design from empty bitumen drums, slit suitably to permit sun and air, (supplied
by the department at stock issue rate) including providing and fixing four legs
19.96
40 cm long of 30 x 3 mm MS riveted to tree guard and providing and fixing 2
nos. MS sheet rings 50 x 0.5 mm with rivets complete in all respects complete
as per specifications.

KSRRB M300- Wrought iron and mild steel welded work KSRRB M300-18. Quintal
Wrought iron and mild steel welded work (using angles, square bars, tees and
channel grills, grating frames, gates and tree guards of any size and design
19.97
etc. including cost of screens and welding rods or bolts and nuts complete
fixed in position but without the cost of excavation and concrete for fixing which
will be paid separately complete as per specifications.
Each
KSRRB M300-Tree guard with MS iron KSRRB M300-19. Providing and fixing
MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4
Nos (25 x 6 mm) and 8 Nos (25 x 3 mm) vertical MS riveted to 3 Nos (25 x 6
19.98
mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long
bolts including painting two coats with paint of approved brand over a coat of
priming, complete in all respects, complete as per specifications.

KSRRB M300-Tree gaurd with MS Angle and Steel wire KSRRB M300-20. Each
Providing and fixing tree gaurd 0.60 metre square, 2.00 metre high fabricated
19.100 with MS angle iron 30 x 30 x 3 mm, MS iron 25 x 3 mm and steel wire 3 mm
dia welded and fabricated as per design in two halves bolted together
complete as per specifications
KSRRB M300-Compensatory afforestation KSRRB M300-21. Planting trees as Ha
compensatory afforestation at the rate of 290 trees per hectare at a spacing of
19.101 6 m by grubbing and leveling the ground upto a depth of 150 mm, digging
holes 0.9 m dia, 1 m deep, mixing farm yard/sludge manure with soil, planting
of saple.
Milling the bituminous pavement surface upto a depth of 55 mm using milling Sqm
machine, to make a uniform surface without disturbing the base, cleaning the
19.102 milled surface, including cost of all labour charges and hire charges of
machineries etc complete., including stacking the milled material on the sides
of road.
Basic Rate
130.00

179.00

30.00

164.00

445.00

1,201.00

578.00

1,813.00

161.00

41.00
 56.00

373.00

1,183.00

182.00

47.00

33.00

6.00

6.00

2.00

112.00

616.00
 262.00

5,954.00

2.00

77.00

121.00

331.00

80.00

39.00

40.00

24.00

90.00

39.00

5.00

30.00
 3.50

469.00

95.00

493.00

36.00

6.00

23.00

16.00

105.00
 58.00

72.00

12.00

2.00

13.00

103.00

46.00

85.00

16.00

103.00

23.00
 92.00

296.00

208.00

46.00

218,743.00

1,050.00

17.00

204.00

1,100.00

207.00

1,988.00
 40.00

377.00

720.00

8,215.00

2,101.00

2,650.00

76,387.00

70.00
Item No. Description Unit
KSRRB 500-1. Cleaning the existing WBM road surface including removing of Sqm
binding materials and other foreign matter with wire brushes and small picks,
sweeping with brooms or soft brushes and finally dusting with old gunny bags
21.1
and / or compressed air, to receive bituminous treatment including cost of all
materials, labour, HOM of machineries complete as per specifications. MORTH
specification clause 501
Sqm
KSRRB 500-2. Cleaning the existing black topped surface with brooms, soft
brushes and finally dusting with old gunny bags and / or compressed air to
21.2
receive bituminous treatment including cost of all materials, labour, HOM of
machineries complete as per specifications. MORTH specification clause 501

Sqm
KSRRB 500-3. Scarifying existing stone metal layer upto 75mm thick along
with their bituminous surface, picking up scarified materials and stacking of old
serviceable materials with lead of 100 m. sequential spreading of the salvaged
21.3
aggregates with fresh aggregates on prepared base and consolidating as per
water bound macadam specifications including cost of all labour, HOM of
machineries complete as per specifications. MORTH specification clause 501

Sqm
KSRRB 500-4 Providing and applying primer coat for surfaces of medium
porosity like cement stabilized soil base@ 0.90kglsqm over prepared surface
21.5 with S.S bitumen emulsion using bitumen tanker fitted with spray set
(excluding cleaning of road surface) including cost of all material, labour, HOM
complete as per specifications. Clause 501 of MORTH V revision

KSRRB M500-6. Providing and applying primer coat with S.S. bitumen Sqm
emulsion on prepared surface of granular base such as WMM including
21.6 cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using
mechanical means complete as per specifications. MORTH Specification No.
502
KSRRB 500-7. Providing and applying tack coat using 80/100 grade Sqm
bitumen(VG10) on the prepared black topped surfaces at 2.5 kg per 10 sqm,
21.7 heating bitumen in boiler fitted with spray set (excluding cleaning of road
surface) including cost of all materials, labour, HOM of machineries complete
as per specifications. MORTH/Chapter 5
KSRRB 500-9. Providing and applying tack coat using 80/100 grade bitumen Sqm
(VG10) on granular base such as WBM surfaces hot bitumen primed at 4 kg
21.9 per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning
of road surface) including cost of all materials, labour, HOM of machineries
complete as per specifications. MORTH / Chapter 5
KSRRB M500-10. Providing and applying tack coat using 80/100 grade Sqm
bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.20 kg
21.10 per sqm on the existing prepared bituminous surface cleaned with mchancial
broom. complete as per specifications. - using bitumen 80/100 on primed
surfaces
cum
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
21.11.1
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 (80 mm to
100mm) with 3.1 % VG-30 Bitumen
 cum
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
21.11.2
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 100/120 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to 75
mm) with 3.3 % VG-30 Bitumen

cum
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
21.11.3
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-I (80 mm to 100
mm) with 3.1 % VG-30 Bitumen

cum
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
21.11.4
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to 75 mm)
with 3.3 % VG-30 Bitumen

cum
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
21.11.5
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-I (80 mm to 100
mm) with 3.1 % VG-30 Bitumen

cum
KSRRB 500-11. Providing and laying bituminous macadam on prepared
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
21.11.6
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75
mm) with 3.3 % VG-30 Bitumen
 Sqm
KSRRB 500-12. Providing, laying and consolidating of crushed stone
aggregates on prepared surface as per built up spray grout specifications
75mm thick, as base course compacted in two layers composite construction
of crushed stone aggregates with application of bitumen binder after each
21.12
layer and lay aggregate on the top of second layer and rolling with power roller
8 to 10 tonne but excluding cost of primer / tack coat including cost of all
materials, labour, HOM of machineries complete as per specifications.MORTH
clause No. 506
cum
KSRRB M500-17. Providing and laying dense graded bituminous macadam
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.17.1
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 (80 mm
to 100mm) with 4 % VG-30 Bitumen

cum
KSRRB M500-17. Providing and laying dense graded bituminous macadam
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.17.2
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 -using 100/120 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to
75 mm) with 4.5 % VG-30 Bitumen

cum
KSRRB M500-17. Providing and laying dense graded bituminous macadam
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.17.3
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-I (80 mm to
100 mm) with 4 % VG-30 Bitumen

cum
KSRRB M500-17. Providing and laying dense graded bituminous macadam
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.17.4
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to
75 mm) with 4.5 % VG-30 Bitumen

cum
KSRRB M500-17. Providing and laying dense graded bituminous macadam
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.17.5
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-I (80 mm
to 100 mm) with 4 % VG-30 Bitumen
 cum
KSRRB M500-17. Providing and laying dense graded bituminous macadam
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.17.6
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50
mm to 75 mm) with 4.5 % VG-30 Bitumen

cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.1
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40 mm) with
4.5 % VG-30 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.2
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm) with 5
% VG-30 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.3
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40/60 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40mm) with 4.5
% VG-30 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.4
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm)
with 5 % VG-30 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.5
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-I (35 mm to 40
mm) with 4.5 % VG-30 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.6
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30
mm) with 5 % VG-30 Bitumen
 cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.7
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40 mm) with
4.5 % VG-10 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.8
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm) with 5
% VG-10 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.9
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40/60 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40mm) with 4.5
% VG-10 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.10
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm)
with 5 % VG-10 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.11
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-I (35 mm to 40
mm) with 4.5 % VG-10 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.20.12
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30
mm) with 5 % VG-10 Bitumen
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.1
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. do -
using 100-120 TPH capacity H.M.P. with sensor paver grading I (35-40mm)
with 4.5% CRMB-55 grade
 cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.2
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100-120 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
CRMB-55 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.3
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading I (35-40mm) with 4.5%
CRMB-55 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.4
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
CRMB-55 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.5
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading I (35 -40mm) with
4.5% CRMB-55 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.6
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading II (25-30mm) with
5% CRMB-55 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.7
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100-120 TPH capacity H.M.P. with sensor paver grading I (35-40mm) with
4.5% NRMB 70 / PMB 70 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.8
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100-120 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
NRMB 70/ PMB 70 grade
 cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.9
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading I (35-40mm) with 4.5%
NRMB 70/ PMB 70 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.10
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
NRMB 70/ PMB 70 grade
cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.11
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading I (35-40mm) with
4.5% NRMB 70/ PMB 70 grade

cum
KSRRB M500-18. Providing and laying semi dense bituminous concrete using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.21.12
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading II (25-30mm) with
5% NRMB 70/ PMB 70 grade
cum
KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
21.22.1 wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 100/120 TPH
capacity H.M.P. with sensor paver Gr-I (50 to 65 mm) with 5.5 % VG-30
Bitumen
cum
KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
21.22.2 wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 100/120 TPH
capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with6 % VG-30
Bitumen
 cum
KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
21.22.3 wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 40/60 TPH
capacity H.M.P. with sensor paver Gr-I (50 mm to 60mm) with 5.5 % VG-30
Bitumen
cum
KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
21.22.4
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using40/60 TPH capacity
H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with 6 % VG-30 Bitumen

cum
KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
21.22.5 wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 40-60 TPH
capacity H.M.P. with mechanical paver grading I (50-65mm) with 5.5%VG-30
Bitumen
cum
KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
21.22.6 wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using40/60 TPH capacity
H.M.P. with Mechanical Paver Gr-II (30 mm to 45 mm) with 6 % VG-30
Bitumen
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.1
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (50 to 65mm) with 5.5 %
CRMB 55
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.2
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with6
% CRMB 55
 cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.3
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40/60
TPH capacity H.M.P. with sensor paver Gr-I (50 mm to 60mm) with 5.5 %
CRMB 55
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.4
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45mm) with 6 % CRMB
55
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.5
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40-60
TPH capacity H.M.P. with mechanical paver grading I (50 -65mm) with 5.5%
CRMB-55 grade
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.6
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with Mechanical Paver Gr-II (30 mm to 45 mm) with 6 %
CRMB 55
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.7
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (50 to 65 mm) with 5.5 %
NRMB 70/ PMB 70
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.8
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications.- using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with 6
% NRMB 70/ PMB 70
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.9
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40/60
TPH capacity H.M.P. with sensor paver Gr-I (50 mm to 60mm) with 5.5
%NRMB 70/PMB 70
 cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.10
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with 6 %
NRMB 70/ PMB 70
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.11
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40-60
TPH capacity H.M.P. with mechanical paver grading I (50-65mm) with 5.5%
NRMB 70/ PMB 70
cum
KSRRB M500-19. Providing and laying bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.23.12
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with Mechanical Paver Gr-II (30 mm to 45 mm) with 6 %
NRMB 70/ PMB 70
Sqm
KSRRB 500-22. Providing and laying single coat surface dressing or first coat
of the two surface dressing with 0.15 cum/10 sqm crushed stone chippings
passing 19mm & retained on 13.20mm sieve as per Table 500-21and bitumen
12 kg / 10 sqm of VG-10 (80/100) as wearing course consisting of a layer of
21.26
bituminous binder laid on the prepared surface followed by cover of crushed
stone chippings of specified size (may be pre-coated also) and rolling with
power roller 8-10 tonne capacity including cost of all materials, labour, HOM of
machineries complete as per specifications. MORTHclause No.510

Sqm
KSRRB 500-23. Providing and laying second coat surface dressing with 0.10
cum/10 sqm crushed stone chippings passing 13.2mm & retained on 9.50mm
sieve as per Table 500-21and bitumen 10 kg / 10 sqm of VG-10 (80/100) as
wearing course consisting of a layer of bituminous binder laid on the prepared
21.27
surface followed by cover of crushed stone chippings of specified size (may be
pre-coated also) and rolling with power roller 8-10 tonne capacity including
cost of all materials, labour, HOM of machineries complete as per
specifications. MORTHclause No.510
Sqm
KSRRB 500-27. Providing and laying open graded premix carpet of 20mm
thick on prepared surface in a single course as wearing course composed of
11.2mm and 13.2mm size stone aggregates 0.027 cum/ sqm premixd with
bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity
21.32
laying manually and rolling with power roller 8-10 tonne, excluding cost of tack
coat, including cost of all materials, labour, HOM of machineries complete as
per specifications using VG 10 (80/100) grade. MORTH clause No.511/Chapter
5
Sqm
KSRRB 500-28. Providing and laying open graded premix carpet of 20mm
thick on prepared surface in a single course as wearing course composed of
11.2mm and 13.2mm size stone aggregates 0.027 cum/ sqm premixd with
bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity
21.33
laying manually and rolling with power roller 8-10 tonne, excluding cost of tack
coat, including cost of all materials, labour, HOM of machineries complete as
per specifications using VG 10 (80/100) grade. MORTH clause No.511/Chapter
5.- (Using CRMB 55 grade)
 Sqm
KSRRB 500-30. Providing and laying 20 mm thick mix seal surfacing Type A on
prepared surface as wearing course with specified graded crushed aggregates
of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with bituminous binder at
2.15kg/sqm, in hotmix plant 40/60 tonne, transporting the mixed materials in
21.36 tipper and laying with machanical paver finisher to required level and grade,
rolling w ith power roller 8-10 tonne, excluding cost of tack coat including cost
of all materials, labour, HOM complete as per specifications using VG-30 (To
be used where the annual rainfall is more than 150 ems) Clause 508 of
MORTH V revision IRC-SP-53-2010
Sqm
KSRRB 500-31. Providing and laying 20 mm thick mix seal surfacing Type A on
prepared surface as wearing course with specified graded crushed aggregates
of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with bituminous binder at
2.15kg/sqm, in hotmix plant 40/60 tonne, transporting the mixed materials in
21.37 tipper and laying with machanical paver finisher to required level and grade,
rolling w ith power roller 8-10 tonne, excluding cost of tack coat including cost
of all materials, labour, HOM complete as per specifications using VG-30 (To
be used where the annual rainfall is more than 150 ems) Clause 508 of
MORTH V revision IRC-SP-53-2010 using CRMB 55 grade bitumen

Sqm
KSRRB 500-32. Providing and laying 20 mm thick mix seal surfacing Type-B
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixed with
bituminous binder at 1.90kg/sqm, in hotmix plant 40/60 TPH, transporting the
21.38 mixed materials in tipper and laying with mechanical paver finisher to required
level and grade, rolling with power roller 8-10 tonne, excluding cost of tack coat
including cost of all materials, labour, HOM complete as per specifications
using VG-30 (To be used where the annual rainfall is less than 150 ems)
Clause 508 of MORTH V revision IRC-SP-53-2010
Sqm
KSRRB 500-33. Providing and laying 20 mm thick mix seal surfacing Type-B
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixed with
bituminous binder at 1.90kg/sqm, in hotmix plant 40/60 TPH, transporting the
mixed materials in tipper and laying with mechanical paver finisher to required
21.39
level and grade, rolling with power roller 8-10 tonne, excluding cost of tack coat
including cost of all materials, labour, HOM complete as per specifications
using VG-30 (To be used where the annual rainfall is less than 150 ems)
Clause 508 of MORTH V revision IRC-SP-53-2010 using CRMB 55 grade
bitumen
Sqm
KSRRB 500-34. Providing and laying 20 mm thick mix seal surfacing Type A on
prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 11.2mm size 0.027 cum/sqm premixd with bitumen
binder at 2.20 kg/sqm of in a minimix plant 6 /10 tonne capacity, laying
21.40 manually and rolling with power roller 8-10 tonne excluding cost of tack coat
including cost of all materials, labour, HOM of machineries complete as per
specifications. MORTH clause No.512 - using VG-30 (60/70) bitumen (60/70
grade to be used where the annual rainfall is more than 150 ems) Clause 508
of MORTH V revision IRC-SP-53-2010
Sqm
KSRRB 500-35. Providing and laying 20 mm thick mix seal surfacing Type A on
prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 11.2mm size 0.027 cum/sqm premixd with bitumen
21.41 binder at 2.20 kg/sqm of in a minimix plant 6 /10 tonne capacity, laying
manually and rolling with power roller 8-10 tonne excluding cost of tack coat
including cost of all materials, labour, HOM of machineries complete as per
specifications. MORTH clause No.512 - - using CRMB 55 grade Bitumen
 Sqm
KSRRB 500-36. Providing and laying 20 mm thick mix seal surfacing Type ‘ B ‘
on prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 13.2mm size premixed with bitumen binder @ 1.90
kg/sqm of VG-30 (60/70) in a minimix plant 6 / 10 tonne, laying manually and
21.42
rolling with power roller 8-10 tonne excluding cost of tack coat including cost of
all materials, labour, HOM of machineries complete as per specifications . (To
be used where the annual rainfall is less than 150 ems) Clause 508 of MORTH
V revision

KSRRB 500-37. Providing and laying 20 mm thick mix seal surfacing Type ‘ B ‘ Sqm
on prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 13.2mm size premixed with bitumen binder @ 1.90
21.43 kg/sqm of CRMB 55 grade in a minimix plant 6 / 10 tonne, laying manually and
rolling with power roller 8-10 tonne excluding cost of tack coat including cost of
all materials, labour, HOM of machineries complete as per specifications .
MORTH clause No.512

KSRRB M500- 39.1 and 39.2. Providing and laying SEAL COAT for sealing the Sqm
voids on Bituminous surface, laid to the specified levels, grade and cross fall
manually and rolling with power roller 8 - 10 tonne capacity including cost of all
21.45.1 materials, labour, HOM of machinery complete as per the specifications.
MORTH Specification No. 513 - TYPE A - using graded aggregates 6.7mm and
down size at 0.009 cum/sqm with bitumen binder VG-10 (80/100 grade) at 0.98
kg/sqm.

KSRRB M500- 39.1 and 39.2. Providing and laying SEAL COAT for sealing the Sqm
voids on Bituminous surface, laid to the specified levels, grade and cross fall
manually and rolling with power roller 8 - 10 tonne capacity including cost of all
21.45.2 materials, labour, HOM of machinery complete as per the specifications.
MORTH Specification No. 513 -TYPE B - using graded aggregates 2.36mm
and down size at 0.006 cum/sqm with bitumen binder VG-10 (80/100 grade) at
0.68 kg/sqm.
Sqm
KSRRB M500- Mastic asphalt KSRRB M500-41. Providing and laying 25 mm
thick mastic asphalt wearing course with paving grade bitumen@ 5.82 kg/sqmt
meeting the requirements given in table 500-29, prepared by using mastic
cooker and laid to required level and slope after cleaning the surface, including
providing antiskid surface with bitumen precoated fine grained hard stone
21.47
chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at
an approximate spacing of 10 cm center to center in both directions, pressed
into surface when the temperature of surfaces is not less than 100°C,
protruding 1 mm to 4 mm over mastic surface, complete as per clause 500.15
as per specifications. MORTH Specification No. 515

KSRRB M500-48. Providing and applying slow setting bitumen emulsion@at Sqm
0.75 kg/sqm for sealing cracks less than 3 mm wide or incipient fretting or
21.53
disintegration in an existing bituminous surfacing complete as per
specifications. MORTH Specification No. 518
cum
KSRRB M500-49.1. Providing, laying and rolling of bituminous cold mix on
prepared base consisting of a mixture of unheated mineral aggregate and
emulsified bitumen, including mixing in a plant of suitable type and capacity,
21.55
transporting, laying, compacting and finishing to specified grades and levels
complete as per specifications. Case- I : using bitumen emulsion at 230
kg/cum & 9.5mm nominal size aggregate" Clause 518 of MORTH V revision
 KSRRB M500-49.2. Providing, laying and rolling of Bituminous cold mix on cum
prepared base consisting of a mixture of unheated mineral aggregate and
emulsified bitumen, including mixing in a plant of suitable type and capacity,
21.56 transporting, laying, compacting and finishing to specified grades and levels
complete as per specifications. Case - II : using bitumen emulsion at 193.80
kg/cum & 19mm or 13.2mm nominal size aggregate. Clause 518 of MORTH V
revision
cum
KSRRB M500-49.3. Providing, laying and rolling of Bituminous cold mix on
prepared base consisting of a mixture of unheated mineral aggregate and
emulsified bitumen, including mixing in a plant of suitable type and capacity,
21.57
transporting, laying, compacting and finishing to specified grades and levels
complete as per specifications. Case - Ill :using bitumen emulsion at 157.50
kg/cum & 19mm nominal size aggregate. Clause 518 of MORTH V revision

KSRRB M500-56.1. Providing and laying slurry seal @ 5.40 kg/sqm (Residual Sqm
binder@ 13% by wt. of dry aggregate) consisting of a mixture of fine
aggregates, portland cement filler, bituminous emulsion and water on a road
21.64 surface including cleaning of surface, mixing of slurry seal in a suitable mobile
plant, laying and compacting to provide even riding surface Complete as per
specifications. Type I : 2-3 mm width hair cracks. Clause 512 of MORTH V
revision

KSRRB M500-56.2. Providing and laying slurry seal@ 9.10 kg/sqm (Residual Sqm
binder@ 10.50% by wt of dry aggregate) consisting of a mixture of fine
aggregates, portland cement filler, bituminous emulsion and water on a road
21.65 surface including cleaning of surface, mixing of slurry seal in a suitable mobile
plant, laying and compacting to provide even riding surface Complete as per
specifications. Type II : 4-6 mm width hair cracks. Clause 512 of MORTH V
revision

KSRRB M500-56.3. Providing and laying slurry seal @ 1105 kg/sqm (Residual Sqm
binder@ 9.25% by wt. of dry aggregate) consisting of a mixture affine
aggregates, portland cement filler, bituminous emulsion and water on a road
21.66 surface including cleaning of surface, mixing of slurry seal in a suitable mobile
plant, laying and compacting to provide even riding surface Complete as per
specifications. Type Ill : 6-8 mm width hair cracks. Clause 512 of MORTH V
revision
Sqm
KSRRB M500-57.1. Providing and laying of a stress absorbing membrane over
a cracked road surface, with crack width below 6 mm after cleaning with a
mechanical broom, using modified binder complying with clause No 517
sprayed at the rate of 11 kg/sqm and spreading 5.6 mm crushed stone
21.67
aggregates at 0.11 cum per 10 sqm with hydraulic chip spreader, sweeping the
surface for uniform spread of aggregates and surface finished to conform to
clause 902 complete as per specification. Case - II :Stress absorbing
membrane (SAM) crack 3mm to 6mm width. Clause 517 of MORTH V revision

Sqm
KSRRB M500-51.2. Providing and laying of a stress absorbing membrane over
a cracked road surface, with crack width 6 to 9 mm after cleaning with a
mechanical broom using modified binder complying with clause 517, sprayed
at the rate of 11 kg per 10 sqm and spreading 11.2 mm crushed stone
21.68
aggregates at 0 12 cum per 10 sqm, sweeping the surface for uniform spread
of aggregates and surface finished to conform to clause 902 complete as per
specification. Case- Ill :Stress absorbing membrane (SAM) crack 6mm to 9mm
width. Clause 517 of MORTH V revision
 Sqm
KSRRB M500-57.3. Providing and laying a single coat of a stress absorbing
membrane over a cracked road surface, with crack width above 9 mm and
cracked area above 50% after cleaning with a mechanical broom, using
modified binder complying with clause 517, sprayed at the rate of 15 kg per 10
21.69 sqm and spreading 11.2 mm crushed stone aggregates at 0.12 cum per 10
sqm, sweeping the surface for uniform spread of aggregates and surface
finished to conform to clause 902 complete as per specification. Case -IV
:Stress absorbing membrane (SAM) crack width above 9 mm and cracked
area above 50%. Clause 517 of MORTH V revision

KSRRB M500-57.4. Providing and laying a bitumen impregnated geotextile Sqm

layer after cleaning the road surface, geotextile conforming to requirements of
clause 703.3 laid over a tack coat with 1.05 kg per sqm of paving grade
21.70
bitumen 80 - 100 penetration and constructed to the requirement of clause
703.4.4 complete as per specification. Case : Bitumen impregnated geotextile.
Clause 517 of MORTH V revision

KSRRB M500-58.1. Providing and laying of premix of crushed stone cum

aggregates of 40mm down size and emulsion binder at 98 kgs/cum mixed in a
batch type cold mixing plant, laid over prepared surface, by paver finisher,
21.71
rolled with a pneumatic tyred roller initially and finished with a smooth steel
wheel roller, all as per clause 510 complete as per specifications. Case-1:75
mmthickness. Clause 510 of MORTH V revision
cum
KSRRB M500-58.2. Providing and laying of premix of crushed stone
aggregates of 13.20mm down size and emulsion binder at 153 kg/cum mixed
in a batch type cold mixing plant, laid over prepared surface, by paver finisher,
21.72
rolled with a pneumatic tyred roller initially and finished with a smooth steel
wheel roller, all as per clause 500.19.3 complete as per specifications. Case -
II : 40 mm thickness. Clause 510 of MORTH V revision

cum
KSRRB M500-58.3. Providing and laying of premix of crushed stone
aggregates of 6.00mm down size and emulsion binder at 186 kg/cum mixed in
a batch type cold mixing plant, laid over prepared surface, by paver finisher,
21.73
rolled with a pneumatic tyred roller initially and finished with a smooth steel
wheel roller, all as per clause 500.19.3 complete as per specifications. Case- Ill
: 25 mm thickness. Clause 510 of MORTH V revision

cum
KSRRB M500-47. Recycling pavement by cold milling of existing bituminous
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
21.74.1 required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - using milling machine for DBM grade II (50mm to
75mm thick) using bitumen binder VG-30 (60/70 grade) to achieve 4.50%
bitumen content.
 cum
KSRRB M500-47. Recycling pavement by cold milling of existing bituminous
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
21.74.2 required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - Scarifying using roller attached scarifier - for DBM
grade II (50mm to 75mm thick) using bitumen binder VG-30 (60/70 grade) to
achieve 4.50% bitumen content.

cum
KSRRB M500-47. Recycling pavement by cold milling of existing bituminous
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
21.74.3 required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - using milling machine for BM grade II (50mm to 75mm
thick) using bitumen binder VG-30 (60/70 grade) to achieve 3.30% bitumen
content

cum
KSRRB M500-47. Recycling pavement by cold milling of existing bituminous
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
21.74.4 required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - Scarifying using roller attached scarifier - for BM
grade II (50mm to 75mm thick) using bitumen binder VG-30 (60/70 grade) to
achieve 3.30% bitumen content.

Sqm
Providing and laying 20 mm thick mix seal surfacing TypeA on prepared
surface as wearing course with specified graded crushed aggregates of 5.6mm
and11.2mm size 0.027 cum/sqm premixed with modified bituminous binder at
2.15 kg/sqm consisting of 2.024 kg of VG- 10 bitumen (80/100 grade) and
Plastomeric Thermoplastics (Waste Plastic Additive) @ 0.176 kg, in hotmix
21.75
plant 40/60 TPH, transporting the mixed materials in tipper and laying with
mechanical paver finisher to required level and grade, rolling with power roller
8-10 tonne, excluding cost of tack coat, including cost of all materials, labour,
HOM complete as per specifications. (To be used where annual rainfall is more
than 150cms) Clause 508 of MORTH V revision

Sqm
Providing and laying 20 mm thick mix seal surfacing Type B on prepared
surface as wearing course with specified graded crushed aggregates of 5.6mm
and 13.2mm size 0.027 cum/sqm premixd with modified bituminous binder at
1.90 kg/sqm consisting of 1.748 kg of VG- 10 bitumen (80/100 grade) and
Plastomeric Thermoplastics (Waste Plastic Additive)@ 0.152 kg, in hotmix
21.76
plant 40/60 TPH, transporting the mixed materials in tipper and laying with
mechanical paver finisher to required level and grade, rolling with power roller
8-10 tonne, excluding cost of tack coat, including cost of all materials, labour,
HOM complete as per specifications. (To be used where annual rainfall is less
than 150cms) Clause 508 of MORTH V revision
 cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
21.77.1
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading I (35-40mm) with
4.5% of modified bitumen binder consisting of 4.14% of VG-10 bitumen
(80/100 grade) and 0.36% of plastomeric thermoplastics (waste plastic
additive).

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.2 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading II (25-30mm) with
5% of modified bitumen binder consisting of 4.60% of VG-10 bitumen (80/100
grade) and 0.40% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.3 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-10 bitumen (80/100 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.4 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading II (25-30mm) with 5% of
modified bitumen binder consisting of 4.60% of VG-10 bitumen (80/100 grade)
and 0.40% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.5 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-10 bitumen (80/100 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)
 cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.6 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading I (25-30mm) with 5% of
modified bitumen binder consisting of 4.60% of VG-10 bitumen (80/100 grade)
and 0.40% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.7 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading I (35-40mm) with
4.5% of modified bitumen binder consisting of 4.14% of VG-30 bitumen (60/70
grade) and 0.36% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.8 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading II (25-30mm) with
5% of modified bitumen binder consisting of 4.60% of VG-30 bitumen (60/70
grade) and 0.40% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.9 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-30 bitumen (60/70 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.10 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading II (25-30mm) with 5% of
modified bitumen binder consisting of 4.60% of VG-30 bitumen (60/70 grade)
and 0.40% of plastomeric thermoplastics (waste plastic additive)
 cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.11 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-30 bitumen (60/70 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying semi dense bituminous concrete using crushed
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
21.77.12 rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading II (25-30mm) with 5 % of
modified bitumen binder consisting of 4.60% VG-30 bitumen (60/70 grade) and
0.40% of plastomeric thermoplastics (waste plastic additive)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
21.78.1
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading I
(50-65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-
10 bitumen (80/100 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)
cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
21.78.2
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading II
(30-45mm) with 5.4% of modified bituminous binder consisting of 4.97% of VG-
10 bitumen (80/100 grade) and 0.43% of plastomeric thermoplastics (waste
plastic)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.78.3 tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading I (50-65mm) with
5.2% of modified bituminous binder consisting of 4.78% of VG-10 bitumen
(80/100 grade) and 0.42% of plastomeric thermoplastics (waste plastic)
 cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.78.4 tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading II (30-45mm) with
5.4% of modified bituminous binder consisting of 4.97% of VG-10 bitumen
(80/100 grade) and 0.43% of plastomeric thermoplastics (waste plastic)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
21.78.5
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical sensor paver grading I (50-
65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-10
bitumen (80/100 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)
cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
21.78.6
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical sensor paver grading I (50-
65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-10
bitumen (80/100 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)
cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
21.78.7
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading I
(50-65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-
30 bitumen (60/70 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
21.78.8
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading II
(30-45mm) with 5.4% of modified bituminous binder consisting of 4.97% of VG-
30 bitumen (60/70 grade) and 0.43% of plastomeric thermoplastics (waste
plastic)
 cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.78.9 tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading I (50-65mm) with
5.2% of modified bituminous binder consisting of 4.78% of VG-30 bitumen
(60/70 grade) and 0.42% of plastomeric thermoplastics (waste plastic)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.78.10 tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading II (30-45mm) with
5.4% of modified bituminous binder consisting of 4.97% of VG-30 bitumen
(60/70 grade) and 0.43% of plastomeric thermoplastics (waste plastic)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.78.11 tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical sensor paver grading I (50-
65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-30
bitumen (60/70 grade) and 0.42% of plastomeric thermoplastics (waste plastic)

cum
Providing and laying bituminous concrete 40mm thick with hot mix plant, using
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
21.78.12 tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical paver grading II (30-45mm)
with 5.4% of modified bituminous binder consisting of 4.97% of VG-30 bitumen
(60/70 grade) and 0.43% of plastomeric thermoplastics (waste plastic)

cum
Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision:
Providing and laying stone Matrix Asphalt (SMA) using crushed aggregates of
specified grading (as per section 515 of MORTH 5th Revision): premixed with
modified bituminous binder containing Pelletized Cellous fibre at 0.3% (on
loose fibre basis) on the weight of total mix in the batch and filler(Hydrated lime
dust @ 2% of weight of aggregates, transporting the hot mix to work site,
21.79.1 Laying with a paver finisher to the required grade, level and alignment, rolling
with smooth wheeled, Vibratory and tandem rollers to achieve the desired
compaction as per MORTH specifications clause no. 515 complete in all
respects complete as per specification. (Pnumatic tyre roller must not be
used). - using 40/60 TPH capacity H.M.P. with mechanical paver SMA - 45mm
to 75mm, compacted thickness with 5.8% VG-30 bitumen as per MORTH 5
revision clause 515
 cum
Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision:
Providing and laying stone Matrix Asphalt (SMA) using crushed aggregates of
specified grading (as per section 515 of MORTH 5th Revision): premixed with
modified bituminous binder containing Pelletized Cellous fibre at 0.3% (on
loose fibre basis) on the weight of total mix in the batch and filler(Hydrated lime
dust @ 2% of weight of aggregates, transporting the hot mix to work site,
21.79.2 Laying with a paver finisher to the required grade, level and alignment, rolling
with smooth wheeled, Vibratory and tandem rollers to achieve the desired
compaction as per MORTH specifications clause no. 515 complete in all
respects complete as per specification. (Pnumatic tyre roller must not be
used). - using 40/60 TPH capacity H.M.P. with mechanical paver SMA - 40mm
to 50mm, compacted thickness with 5.8% VG-30 bitumen as per MORTH 5
revision clause 515.
Basic Rate
21.00

5.00

133.00

43.00

32.00

14.00

23.00

12.00

6,351.00
6,871.00

6,222.00

6,335.00

6,179.00

6,292.00
 414.00

7,248.00

7,806.00

7,113.00

7,671.00

7,065.00
7,626.00

7,748.00

8,274.00

7,728.00

8,263.00

7,681.00

8,218.00
7,650.00

8,176.00

7,629.00

8,155.00

7,776.00

8,110.00

7,882.00
 8,434.00

7,863.00

8,412.00

7,817.00

8,367.00

9,373.00

10,091.00
 9,352.00

10,069.00

9,307.00

10,024.00

8,682.00

9,015.00
8,544.00

8,877.00

8,498.00

8,831.00

8,840.00

9,181.00
 8,704.00

9,045.00

8,658.00

8,999.00

10,475.00

10,908.00

10,456.00
10,887.00

10,410.00

10,841.00

101.00

81.00

149.00

153.00
163.00

166.00

153.00

155.00

179.00

181.00
 173.00

171.00

60.00

47.00

744.00

41.00

12,902.00
11,185.00

12,144.00

30.00

33.00

32.00

69.00

75.00
 94.00

124.00

6,944.00

9,703.00

10,753.00

5,930.00
5,949.00

4,736.00

4,755.00

161.00

156.00
7,527.00

8,038.00

7,505.00

8,016.00

7,460.00
7,971.00

7,618.00

8,139.00

7,596.00

8,118.00
7,551.00

8,073.00

8,438.00

8,758.00

7,993.00
8,620.00

8,144.00

8,771.00

8,546.00

8,872.00
 8,101.00

8,733.00

8,251.00

8,884.00

10,766.00
10,761.00
Item No. Description Unit
21.1 KSRRB 500-1. Cleaning the existing WBM road surface including removing of Sqm
binding materials and other foreign matter with wire brushes and small picks,
sweeping with brooms or soft brushes and finally dusting with old gunny bags
and / or compressed air, to receive bituminous treatment including cost of all
materials, labour, HOM of machineries complete as per specifications. MORTH
specification clause 501

21.2 KSRRB 500-2. Cleaning the existing black topped surface with brooms, soft Sqm
brushes and finally dusting with old gunny bags and / or compressed air to
receive bituminous treatment including cost of all materials, labour, HOM of
machineries complete as per specifications. MORTH specification clause 501

21.3 KSRRB 500-3. Scarifying existing stone metal layer upto 75mm thick along Sqm
with their bituminous surface, picking up scarified materials and stacking of old
serviceable materials with lead of 100 m. sequential spreading of the salvaged
aggregates with fresh aggregates on prepared base and consolidating as per
water bound macadam specifications including cost of all labour, HOM of
machineries complete as per specifications. MORTH specification clause 501

21.5 KSRRB 500-4 Providing and applying primer coat for surfaces of medium Sqm
porosity like cement stabilized soil base@ 0.90kglsqm over prepared surface
with S.S bitumen emulsion using bitumen tanker fitted with spray set
(excluding cleaning of road surface) including cost of all material, labour, HOM
complete as per specifications. Clause 501 of MORTH V revision

21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen Sqm
emulsion on prepared surface of granular base such as WMM including
cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using
mechanical means complete as per specifications. MORTH Specification No.
502
21.7 KSRRB 500-7. Providing and applying tack coat using 80/100 grade Sqm
bitumen(VG10) on the prepared black topped surfaces at 2.5 kg per 10 sqm,
heating bitumen in boiler fitted with spray set (excluding cleaning of road
surface) including cost of all materials, labour, HOM of machineries complete
as per specifications. MORTH/Chapter 5
21.9 KSRRB 500-9. Providing and applying tack coat using 80/100 grade bitumen Sqm
(VG10) on granular base such as WBM surfaces hot bitumen primed at 4 kg
per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning
of road surface) including cost of all materials, labour, HOM of machineries
complete as per specifications. MORTH / Chapter 5
21.10 KSRRB M500-10. Providing and applying tack coat using 80/100 grade Sqm
bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.20 kg
per sqm on the existing prepared bituminous surface cleaned with mchancial
broom. complete as per specifications. - using bitumen 80/100 on primed
surfaces
21.11.1 KSRRB 500-11. Providing and laying bituminous macadam on prepared cum
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 (80 mm to
100mm) with 3.1 % VG-30 Bitumen
21.11.2 KSRRB 500-11. Providing and laying bituminous macadam on prepared cum
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 100/120 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to 75
mm) with 3.3 % VG-30 Bitumen

21.11.3 KSRRB 500-11. Providing and laying bituminous macadam on prepared cum
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-I (80 mm to 100
mm) with 3.1 % VG-30 Bitumen

21.11.4 KSRRB 500-11. Providing and laying bituminous macadam on prepared cum
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to 75 mm)
with 3.3 % VG-30 Bitumen

21.11.5 KSRRB 500-11. Providing and laying bituminous macadam on prepared cum
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-I (80 mm to 100
mm) with 3.1 % VG-30 Bitumen

21.11.6 KSRRB 500-11. Providing and laying bituminous macadam on prepared cum
surface with crushed coarse aggregates as per design mix formula for base /
binding course including loading of aggregates with F.E. loader, hot mixing of
stone aggregates and bitumen in hot mix plant, transporting the mixd material
in tipper to paver and laying mixed materials with paver finisher to the required
level and grade, rolling by power roller to achieve the desired density, but
excluding cost of primer / tack coat including lead, lift and cost of all materials,
labour, HOM of machineries complete as per specifications. MORTH /Chapter
5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75
mm) with 3.3 % VG-30 Bitumen
21.12 KSRRB 500-12. Providing, laying and consolidating of crushed stone Sqm
aggregates on prepared surface as per built up spray grout specifications
75mm thick, as base course compacted in two layers composite construction
of crushed stone aggregates with application of bitumen binder after each
layer and lay aggregate on the top of second layer and rolling with power roller
8 to 10 tonne but excluding cost of primer / tack coat including cost of all
materials, labour, HOM of machineries complete as per specifications.MORTH
clause No. 506

21.17.1 KSRRB M500-17. Providing and laying dense graded bituminous macadam cum
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 100/120 TPH capacity H.M.P. with sensor paver Gr-1 (80 mm
to 100mm) with 4 % VG-30 Bitumen

21.17.2 KSRRB M500-17. Providing and laying dense graded bituminous macadam cum
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 -using 100/120 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to
75 mm) with 4.5 % VG-30 Bitumen

21.17.3 KSRRB M500-17. Providing and laying dense graded bituminous macadam cum
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-I (80 mm to
100 mm) with 4 % VG-30 Bitumen

21.17.4 KSRRB M500-17. Providing and laying dense graded bituminous macadam cum
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with sensor paver Gr-II (50 mm to
75 mm) with 4.5 % VG-30 Bitumen

21.17.5 KSRRB M500-17. Providing and laying dense graded bituminous macadam cum
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-I (80 mm
to 100 mm) with 4 % VG-30 Bitumen
21.17.6 KSRRB M500-17. Providing and laying dense graded bituminous macadam cum
using crushed aggregates of specified grading, premixed with VG30 grade
bituminous binder and, transporting the hot mix to work site, laying to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH table 500-10
complete in all respects complete as per specifications.. MORTH Specification
No. 507 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50
mm to 75 mm) with 4.5 % VG-30 Bitumen

21.20.1 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40 mm) with
4.5 % VG-30 Bitumen

21.20.2 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm) with 5
% VG-30 Bitumen

21.20.3 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40/60 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40mm) with 4.5
% VG-30 Bitumen

21.20.4 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm)
with 5 % VG-30 Bitumen

21.20.5 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-I (35 mm to 40
mm) with 4.5 % VG-30 Bitumen

21.20.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30
mm) with 5 % VG-30 Bitumen
21.20.7 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40 mm) with
4.5 % VG-10 Bitumen

21.20.8 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm) with 5
% VG-10 Bitumen

21.20.9 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40/60 TPH capacity H.M.P. with sensor paver Gr-I (35 mm to 40mm) with 4.5
% VG-10 Bitumen

21.20.10 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with sensor paver Gr-II (25 mm to 30 mm)
with 5 % VG-10 Bitumen

21.20.11 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-I (35 mm to 40
mm) with 4.5 % VG-10 Bitumen

21.20.12 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. -
using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30
mm) with 5 % VG-10 Bitumen

21.21.1 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. do -
using 100-120 TPH capacity H.M.P. with sensor paver grading I (35-40mm)
with 4.5% CRMB-55 grade
21.21.2 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100-120 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
CRMB-55 grade

21.21.3 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading I (35-40mm) with 4.5%
CRMB-55 grade

21.21.4 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
CRMB-55 grade

21.21.5 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading I (35 -40mm) with
4.5% CRMB-55 grade

21.21.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading II (25-30mm) with
5% CRMB-55 grade

21.21.7 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100-120 TPH capacity H.M.P. with sensor paver grading I (35-40mm) with
4.5% NRMB 70 / PMB 70 grade

21.21.8 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
100-120 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
NRMB 70/ PMB 70 grade
21.21.9 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading I (35-40mm) with 4.5%
NRMB 70/ PMB 70 grade

21.21.10 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with sensor paver grading II (25-30mm) with 5%
NRMB 70/ PMB 70 grade

21.21.11 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading I (35-40mm) with
4.5% NRMB 70/ PMB 70 grade

21.21.12 KSRRB M500-18. Providing and laying semi dense bituminous concrete using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction as per MORTH specification
clause No. 508 complete in all respects complete as per specifications. - using
40-60 TPH capacity H.M.P. with mechanical paver grading II (25-30mm) with
5% NRMB 70/ PMB 70 grade

21.22.1 KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with cum
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 100/120 TPH
capacity H.M.P. with sensor paver Gr-I (50 to 65 mm) with 5.5 % VG-30
Bitumen

21.22.2 KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with cum
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 100/120 TPH
capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with6 % VG-30
Bitumen
21.22.3 KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with cum
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 40/60 TPH
capacity H.M.P. with sensor paver Gr-I (50 mm to 60mm) with 5.5 % VG-30
Bitumen

21.22.4 KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with cum
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using40/60 TPH capacity
H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with 6 % VG-30 Bitumen

21.22.5 KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with cum
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using 40-60 TPH
capacity H.M.P. with mechanical paver grading I (50-65mm) with 5.5%VG-30
Bitumen

21.22.6 KSRRB M500-19. Providing and laying bituminous concrete 40 mm thick with cum
hot mix plant, using crushed aggregates of specified grading, premixed with
bituminous binder and filler, transporting the hot mix to work site, laying with a
paver finisher to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MORTH specification clause No. 500.9 complete in all respects complete
as per specifications. MORTH Specification No. 509 - using40/60 TPH capacity
H.M.P. with Mechanical Paver Gr-II (30 mm to 45 mm) with 6 % VG-30
Bitumen

21.23.1 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (50 to 65mm) with 5.5 %
CRMB 55

21.23.2 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with6
% CRMB 55
21.23.3 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40/60
TPH capacity H.M.P. with sensor paver Gr-I (50 mm to 60mm) with 5.5 %
CRMB 55

21.23.4 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45mm) with 6 % CRMB
55

21.23.5 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40-60
TPH capacity H.M.P. with mechanical paver grading I (50 -65mm) with 5.5%
CRMB-55 grade

21.23.6 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with Mechanical Paver Gr-II (30 mm to 45 mm) with 6 %
CRMB 55

21.23.7 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using
100/120 TPH capacity H.M.P. with sensor paver Gr-I (50 to 65 mm) with 5.5 %
NRMB 70/ PMB 70

21.23.8 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications.- using
100/120 TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with 6
% NRMB 70/ PMB 70

21.23.9 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40/60
TPH capacity H.M.P. with sensor paver Gr-I (50 mm to 60mm) with 5.5
%NRMB 70/PMB 70
21.23.10 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with sensor paver Gr-II (30 mm to 45 mm) with 6 %
NRMB 70/ PMB 70

21.23.11 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using 40-60
TPH capacity H.M.P. with mechanical paver grading I (50-65mm) with 5.5%
NRMB 70/ PMB 70

21.23.12 KSRRB M500-19. Providing and laying bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 509 complete in all respects complete as per specifications. - using40/60
TPH capacity H.M.P. with Mechanical Paver Gr-II (30 mm to 45 mm) with 6 %
NRMB 70/ PMB 70

21.26 KSRRB 500-22. Providing and laying single coat surface dressing or first coat Sqm
of the two surface dressing with 0.15 cum/10 sqm crushed stone chippings
passing 19mm & retained on 13.20mm sieve as per Table 500-21and bitumen
12 kg / 10 sqm of VG-10 (80/100) as wearing course consisting of a layer of
bituminous binder laid on the prepared surface followed by cover of crushed
stone chippings of specified size (may be pre-coated also) and rolling with
power roller 8-10 tonne capacity including cost of all materials, labour, HOM of
machineries complete as per specifications. MORTHclause No.510

21.27 KSRRB 500-23. Providing and laying second coat surface dressing with 0.10 Sqm
cum/10 sqm crushed stone chippings passing 13.2mm & retained on 9.50mm
sieve as per Table 500-21and bitumen 10 kg / 10 sqm of VG-10 (80/100) as
wearing course consisting of a layer of bituminous binder laid on the prepared
surface followed by cover of crushed stone chippings of specified size (may be
pre-coated also) and rolling with power roller 8-10 tonne capacity including
cost of all materials, labour, HOM of machineries complete as per
specifications. MORTHclause No.510

21.32 KSRRB 500-27. Providing and laying open graded premix carpet of 20mm Sqm
thick on prepared surface in a single course as wearing course composed of
11.2mm and 13.2mm size stone aggregates 0.027 cum/ sqm premixd with
bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity
laying manually and rolling with power roller 8-10 tonne, excluding cost of tack
coat, including cost of all materials, labour, HOM of machineries complete as
per specifications using VG 10 (80/100) grade. MORTH clause No.511/Chapter
5

21.33 KSRRB 500-28. Providing and laying open graded premix carpet of 20mm Sqm
thick on prepared surface in a single course as wearing course composed of
11.2mm and 13.2mm size stone aggregates 0.027 cum/ sqm premixd with
bituminous binder at 1.46kg/sqm in mini hot mix plant 6-10 tonne capacity
laying manually and rolling with power roller 8-10 tonne, excluding cost of tack
coat, including cost of all materials, labour, HOM of machineries complete as
per specifications using VG 10 (80/100) grade. MORTH clause No.511/Chapter
5.- (Using CRMB 55 grade)
21.36 KSRRB 500-30. Providing and laying 20 mm thick mix seal surfacing Type A on Sqm
prepared surface as wearing course with specified graded crushed aggregates
of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with bituminous binder at
2.15kg/sqm, in hotmix plant 40/60 tonne, transporting the mixed materials in
tipper and laying with machanical paver finisher to required level and grade,
rolling w ith power roller 8-10 tonne, excluding cost of tack coat including cost
of all materials, labour, HOM complete as per specifications using VG-30 (To
be used where the annual rainfall is more than 150 ems) Clause 508 of
MORTH V revision IRC-SP-53-2010

21.37 KSRRB 500-31. Providing and laying 20 mm thick mix seal surfacing Type A on Sqm
prepared surface as wearing course with specified graded crushed aggregates
of 5.6mm and 11.2mm size 0.027 cum/sqm premixd with bituminous binder at
2.15kg/sqm, in hotmix plant 40/60 tonne, transporting the mixed materials in
tipper and laying with machanical paver finisher to required level and grade,
rolling w ith power roller 8-10 tonne, excluding cost of tack coat including cost
of all materials, labour, HOM complete as per specifications using VG-30 (To
be used where the annual rainfall is more than 150 ems) Clause 508 of
MORTH V revision IRC-SP-53-2010 using CRMB 55 grade bitumen

21.38 KSRRB 500-32. Providing and laying 20 mm thick mix seal surfacing Type-B Sqm
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixed with
bituminous binder at 1.90kg/sqm, in hotmix plant 40/60 TPH, transporting the
mixed materials in tipper and laying with mechanical paver finisher to required
level and grade, rolling with power roller 8-10 tonne, excluding cost of tack coat
including cost of all materials, labour, HOM complete as per specifications
using VG-30 (To be used where the annual rainfall is less than 150 ems)
Clause 508 of MORTH V revision IRC-SP-53-2010

21.39 KSRRB 500-33. Providing and laying 20 mm thick mix seal surfacing Type-B Sqm
on prepared surface as wearing course with specified graded crushed
aggregates of 5.6mm and 13.2mm size 0.027 cum/sqm premixed with
bituminous binder at 1.90kg/sqm, in hotmix plant 40/60 TPH, transporting the
mixed materials in tipper and laying with mechanical paver finisher to required
level and grade, rolling with power roller 8-10 tonne, excluding cost of tack coat
including cost of all materials, labour, HOM complete as per specifications
using VG-30 (To be used where the annual rainfall is less than 150 ems)
Clause 508 of MORTH V revision IRC-SP-53-2010 using CRMB 55 grade
bitumen

21.40 KSRRB 500-34. Providing and laying 20 mm thick mix seal surfacing Type A on Sqm
prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 11.2mm size 0.027 cum/sqm premixd with bitumen
binder at 2.20 kg/sqm of in a minimix plant 6 /10 tonne capacity, laying
manually and rolling with power roller 8-10 tonne excluding cost of tack coat
including cost of all materials, labour, HOM of machineries complete as per
specifications. MORTH clause No.512 - using VG-30 (60/70) bitumen (60/70
grade to be used where the annual rainfall is more than 150 ems) Clause 508
of MORTH V revision IRC-SP-53-2010

21.41 KSRRB 500-35. Providing and laying 20 mm thick mix seal surfacing Type A on Sqm
prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 11.2mm size 0.027 cum/sqm premixd with bitumen
binder at 2.20 kg/sqm of in a minimix plant 6 /10 tonne capacity, laying
manually and rolling with power roller 8-10 tonne excluding cost of tack coat
including cost of all materials, labour, HOM of machineries complete as per
specifications. MORTH clause No.512 - - using CRMB 55 grade Bitumen
21.42 KSRRB 500-36. Providing and laying 20 mm thick mix seal surfacing Type ‘ B ‘ Sqm
on prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 13.2mm size premixed with bitumen binder @ 1.90
kg/sqm of VG-30 (60/70) in a minimix plant 6 / 10 tonne, laying manually and
rolling with power roller 8-10 tonne excluding cost of tack coat including cost of
all materials, labour, HOM of machineries complete as per specifications . (To
be used where the annual rainfall is less than 150 ems) Clause 508 of MORTH
V revision

21.43 KSRRB 500-37. Providing and laying 20 mm thick mix seal surfacing Type ‘ B ‘ Sqm
on prepared surface in a single course composed of specified graded crushed
aggregates 5.6mm to 13.2mm size premixed with bitumen binder @ 1.90
kg/sqm of CRMB 55 grade in a minimix plant 6 / 10 tonne, laying manually and
rolling with power roller 8-10 tonne excluding cost of tack coat including cost of
all materials, labour, HOM of machineries complete as per specifications .
MORTH clause No.512

21.45.1 KSRRB M500- 39.1 and 39.2. Providing and laying SEAL COAT for sealing the Sqm
voids on Bituminous surface, laid to the specified levels, grade and cross fall
manually and rolling with power roller 8 - 10 tonne capacity including cost of all
materials, labour, HOM of machinery complete as per the specifications.
MORTH Specification No. 513 - TYPE A - using graded aggregates 6.7mm and
down size at 0.009 cum/sqm with bitumen binder VG-10 (80/100 grade) at 0.98
kg/sqm.

21.45.2 KSRRB M500- 39.1 and 39.2. Providing and laying SEAL COAT for sealing the Sqm
voids on Bituminous surface, laid to the specified levels, grade and cross fall
manually and rolling with power roller 8 - 10 tonne capacity including cost of all
materials, labour, HOM of machinery complete as per the specifications.
MORTH Specification No. 513 -TYPE B - using graded aggregates 2.36mm
and down size at 0.006 cum/sqm with bitumen binder VG-10 (80/100 grade) at
0.68 kg/sqm.

21.47 KSRRB M500- Mastic asphalt KSRRB M500-41. Providing and laying 25 mm Sqm
thick mastic asphalt wearing course with paving grade bitumen@ 5.82 kg/sqmt
meeting the requirements given in table 500-29, prepared by using mastic
cooker and laid to required level and slope after cleaning the surface, including
providing antiskid surface with bitumen precoated fine grained hard stone
chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at
an approximate spacing of 10 cm center to center in both directions, pressed
into surface when the temperature of surfaces is not less than 100°C,
protruding 1 mm to 4 mm over mastic surface, complete as per clause 500.15
as per specifications. MORTH Specification No. 515

21.53 KSRRB M500-48. Providing and applying slow setting bitumen emulsion@at Sqm
0.75 kg/sqm for sealing cracks less than 3 mm wide or incipient fretting or
disintegration in an existing bituminous surfacing complete as per
specifications. MORTH Specification No. 518
21.55 KSRRB M500-49.1. Providing, laying and rolling of bituminous cold mix on cum
prepared base consisting of a mixture of unheated mineral aggregate and
emulsified bitumen, including mixing in a plant of suitable type and capacity,
transporting, laying, compacting and finishing to specified grades and levels
complete as per specifications. Case- I : using bitumen emulsion at 230
kg/cum & 9.5mm nominal size aggregate" Clause 518 of MORTH V revision
21.56 KSRRB M500-49.2. Providing, laying and rolling of Bituminous cold mix on cum
prepared base consisting of a mixture of unheated mineral aggregate and
emulsified bitumen, including mixing in a plant of suitable type and capacity,
transporting, laying, compacting and finishing to specified grades and levels
complete as per specifications. Case - II : using bitumen emulsion at 193.80
kg/cum & 19mm or 13.2mm nominal size aggregate. Clause 518 of MORTH V
revision

21.57 KSRRB M500-49.3. Providing, laying and rolling of Bituminous cold mix on cum
prepared base consisting of a mixture of unheated mineral aggregate and
emulsified bitumen, including mixing in a plant of suitable type and capacity,
transporting, laying, compacting and finishing to specified grades and levels
complete as per specifications. Case - Ill :using bitumen emulsion at 157.50
kg/cum & 19mm nominal size aggregate. Clause 518 of MORTH V revision

21.64 KSRRB M500-56.1. Providing and laying slurry seal @ 5.40 kg/sqm (Residual Sqm
binder@ 13% by wt. of dry aggregate) consisting of a mixture of fine
aggregates, portland cement filler, bituminous emulsion and water on a road
surface including cleaning of surface, mixing of slurry seal in a suitable mobile
plant, laying and compacting to provide even riding surface Complete as per
specifications. Type I : 2-3 mm width hair cracks. Clause 512 of MORTH V
revision

21.65 KSRRB M500-56.2. Providing and laying slurry seal@ 9.10 kg/sqm (Residual Sqm
binder@ 10.50% by wt of dry aggregate) consisting of a mixture of fine
aggregates, portland cement filler, bituminous emulsion and water on a road
surface including cleaning of surface, mixing of slurry seal in a suitable mobile
plant, laying and compacting to provide even riding surface Complete as per
specifications. Type II : 4-6 mm width hair cracks. Clause 512 of MORTH V
revision

21.66 KSRRB M500-56.3. Providing and laying slurry seal @ 1105 kg/sqm (Residual Sqm
binder@ 9.25% by wt. of dry aggregate) consisting of a mixture affine
aggregates, portland cement filler, bituminous emulsion and water on a road
surface including cleaning of surface, mixing of slurry seal in a suitable mobile
plant, laying and compacting to provide even riding surface Complete as per
specifications. Type Ill : 6-8 mm width hair cracks. Clause 512 of MORTH V
revision

21.67 KSRRB M500-57.1. Providing and laying of a stress absorbing membrane over Sqm
a cracked road surface, with crack width below 6 mm after cleaning with a
mechanical broom, using modified binder complying with clause No 517
sprayed at the rate of 11 kg/sqm and spreading 5.6 mm crushed stone
aggregates at 0.11 cum per 10 sqm with hydraulic chip spreader, sweeping the
surface for uniform spread of aggregates and surface finished to conform to
clause 902 complete as per specification. Case - II :Stress absorbing
membrane (SAM) crack 3mm to 6mm width. Clause 517 of MORTH V revision

21.68 KSRRB M500-51.2. Providing and laying of a stress absorbing membrane over Sqm
a cracked road surface, with crack width 6 to 9 mm after cleaning with a
mechanical broom using modified binder complying with clause 517, sprayed
at the rate of 11 kg per 10 sqm and spreading 11.2 mm crushed stone
aggregates at 0 12 cum per 10 sqm, sweeping the surface for uniform spread
of aggregates and surface finished to conform to clause 902 complete as per
specification. Case- Ill :Stress absorbing membrane (SAM) crack 6mm to 9mm
width. Clause 517 of MORTH V revision
21.69 KSRRB M500-57.3. Providing and laying a single coat of a stress absorbing Sqm
membrane over a cracked road surface, with crack width above 9 mm and
cracked area above 50% after cleaning with a mechanical broom, using
modified binder complying with clause 517, sprayed at the rate of 15 kg per 10
sqm and spreading 11.2 mm crushed stone aggregates at 0.12 cum per 10
sqm, sweeping the surface for uniform spread of aggregates and surface
finished to conform to clause 902 complete as per specification. Case -IV
:Stress absorbing membrane (SAM) crack width above 9 mm and cracked
area above 50%. Clause 517 of MORTH V revision

21.70 KSRRB M500-57.4. Providing and laying a bitumen impregnated geotextile Sqm
layer after cleaning the road surface, geotextile conforming to requirements of
clause 703.3 laid over a tack coat with 1.05 kg per sqm of paving grade
bitumen 80 - 100 penetration and constructed to the requirement of clause
703.4.4 complete as per specification. Case : Bitumen impregnated geotextile.
Clause 517 of MORTH V revision

21.71 KSRRB M500-58.1. Providing and laying of premix of crushed stone cum
aggregates of 40mm down size and emulsion binder at 98 kgs/cum mixed in a
batch type cold mixing plant, laid over prepared surface, by paver finisher,
rolled with a pneumatic tyred roller initially and finished with a smooth steel
wheel roller, all as per clause 510 complete as per specifications. Case-1:75
mmthickness. Clause 510 of MORTH V revision

21.72 KSRRB M500-58.2. Providing and laying of premix of crushed stone cum
aggregates of 13.20mm down size and emulsion binder at 153 kg/cum mixed
in a batch type cold mixing plant, laid over prepared surface, by paver finisher,
rolled with a pneumatic tyred roller initially and finished with a smooth steel
wheel roller, all as per clause 500.19.3 complete as per specifications. Case -
II : 40 mm thickness. Clause 510 of MORTH V revision

21.73 KSRRB M500-58.3. Providing and laying of premix of crushed stone cum
aggregates of 6.00mm down size and emulsion binder at 186 kg/cum mixed in
a batch type cold mixing plant, laid over prepared surface, by paver finisher,
rolled with a pneumatic tyred roller initially and finished with a smooth steel
wheel roller, all as per clause 500.19.3 complete as per specifications. Case- Ill
: 25 mm thickness. Clause 510 of MORTH V revision

21.74.1 KSRRB M500-47. Recycling pavement by cold milling of existing bituminous cum
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - using milling machine for DBM grade II (50mm to
75mm thick) using bitumen binder VG-30 (60/70 grade) to achieve 4.50%
bitumen content.
21.74.2 KSRRB M500-47. Recycling pavement by cold milling of existing bituminous cum
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - Scarifying using roller attached scarifier - for DBM
grade II (50mm to 75mm thick) using bitumen binder VG-30 (60/70 grade) to
achieve 4.50% bitumen content.

21.74.3 KSRRB M500-47. Recycling pavement by cold milling of existing bituminous cum
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - using milling machine for BM grade II (50mm to 75mm
thick) using bitumen binder VG-30 (60/70 grade) to achieve 3.30% bitumen
content

21.74.4 KSRRB M500-47. Recycling pavement by cold milling of existing bituminous cum
layers, planing the surface after cold milling, reclaiming excavated material to
the extent of 30 per cent of the required quantity, hauling and stock piling the
reclaimed material near the central recycling plant after carrying out necessary
checks and evaluation, adding fresh material including rejuvenators as
required, mixing in a 40/60 TPH hot mix plant, transporting to site and laying
with mechanical paver and compacting to the required grade, level and
thickness including cost of all materials and labour etc., complete as specified
in MORTH clause 517. - Scarifying using roller attached scarifier - for BM
grade II (50mm to 75mm thick) using bitumen binder VG-30 (60/70 grade) to
achieve 3.30% bitumen content.

21.75 Providing and laying 20 mm thick mix seal surfacing TypeA on prepared Sqm
surface as wearing course with specified graded crushed aggregates of 5.6mm
and11.2mm size 0.027 cum/sqm premixed with modified bituminous binder at
2.15 kg/sqm consisting of 2.024 kg of VG- 10 bitumen (80/100 grade) and
Plastomeric Thermoplastics (Waste Plastic Additive) @ 0.176 kg, in hotmix
plant 40/60 TPH, transporting the mixed materials in tipper and laying with
mechanical paver finisher to required level and grade, rolling with power roller
8-10 tonne, excluding cost of tack coat, including cost of all materials, labour,
HOM complete as per specifications. (To be used where annual rainfall is more
than 150cms) Clause 508 of MORTH V revision

21.76 Providing and laying 20 mm thick mix seal surfacing Type B on prepared Sqm
surface as wearing course with specified graded crushed aggregates of 5.6mm
and 13.2mm size 0.027 cum/sqm premixd with modified bituminous binder at
1.90 kg/sqm consisting of 1.748 kg of VG- 10 bitumen (80/100 grade) and
Plastomeric Thermoplastics (Waste Plastic Additive)@ 0.152 kg, in hotmix
plant 40/60 TPH, transporting the mixed materials in tipper and laying with
mechanical paver finisher to required level and grade, rolling with power roller
8-10 tonne, excluding cost of tack coat, including cost of all materials, labour,
HOM complete as per specifications. (To be used where annual rainfall is less
than 150cms) Clause 508 of MORTH V revision
21.77.1 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading I (35-40mm) with
4.5% of modified bitumen binder consisting of 4.14% of VG-10 bitumen
(80/100 grade) and 0.36% of plastomeric thermoplastics (waste plastic
additive).

21.77.2 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading II (25-30mm) with
5% of modified bitumen binder consisting of 4.60% of VG-10 bitumen (80/100
grade) and 0.40% of plastomeric thermoplastics (waste plastic additive)

21.77.3 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-10 bitumen (80/100 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)

21.77.4 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading II (25-30mm) with 5% of
modified bitumen binder consisting of 4.60% of VG-10 bitumen (80/100 grade)
and 0.40% of plastomeric thermoplastics (waste plastic additive)

21.77.5 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-10 bitumen (80/100 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)
21.77.6 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading I (25-30mm) with 5% of
modified bitumen binder consisting of 4.60% of VG-10 bitumen (80/100 grade)
and 0.40% of plastomeric thermoplastics (waste plastic additive)

21.77.7 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading I (35-40mm) with
4.5% of modified bitumen binder consisting of 4.14% of VG-30 bitumen (60/70
grade) and 0.36% of plastomeric thermoplastics (waste plastic additive)

21.77.8 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 120 TPH
capacity Asphalt batch mix plant with sensor paver grading II (25-30mm) with
5% of modified bitumen binder consisting of 4.60% of VG-30 bitumen (60/70
grade) and 0.40% of plastomeric thermoplastics (waste plastic additive)

21.77.9 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-30 bitumen (60/70 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)

21.77.10 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with sensor paver grading II (25-30mm) with 5% of
modified bitumen binder consisting of 4.60% of VG-30 bitumen (60/70 grade)
and 0.40% of plastomeric thermoplastics (waste plastic additive)
21.77.11 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading I (35-40mm) with 4.5% of
modified bitumen binder consisting of 4.14% of VG-30 bitumen (60/70 grade)
and 0.36% of plastomeric thermoplastics (waste plastic additive)

21.77.12 Providing and laying semi dense bituminous concrete using crushed cum
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site, laying with a paver finisher to the required
grade, level and alignment, rolling with smooth wheeled, vibratory and tandem
rollers to achieve the desired compaction as per MORTH specification clause
No. 508 complete in all respects complete as per specifications using 40-60
TPH capacity HMP with mechanical paver grading II (25-30mm) with 5 % of
modified bitumen binder consisting of 4.60% VG-30 bitumen (60/70 grade) and
0.40% of plastomeric thermoplastics (waste plastic additive)

21.78.1 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading I
(50-65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-
10 bitumen (80/100 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)

21.78.2 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading II
(30-45mm) with 5.4% of modified bituminous binder consisting of 4.97% of VG-
10 bitumen (80/100 grade) and 0.43% of plastomeric thermoplastics (waste
plastic)

21.78.3 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading I (50-65mm) with
5.2% of modified bituminous binder consisting of 4.78% of VG-10 bitumen
(80/100 grade) and 0.42% of plastomeric thermoplastics (waste plastic)
21.78.4 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading II (30-45mm) with
5.4% of modified bituminous binder consisting of 4.97% of VG-10 bitumen
(80/100 grade) and 0.43% of plastomeric thermoplastics (waste plastic)

21.78.5 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical sensor paver grading I (50-
65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-10
bitumen (80/100 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)

21.78.6 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical sensor paver grading I (50-
65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-10
bitumen (80/100 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)

21.78.7 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading I
(50-65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-
30 bitumen (60/70 grade) and 0.42% of plastomeric thermoplastics (waste
plastic)

21.78.8 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 120 TPH capacity Asphalt batch mix plant with sensor paver grading II
(30-45mm) with 5.4% of modified bituminous binder consisting of 4.97% of VG-
30 bitumen (60/70 grade) and 0.43% of plastomeric thermoplastics (waste
plastic)
21.78.9 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading I (50-65mm) with
5.2% of modified bituminous binder consisting of 4.78% of VG-30 bitumen
(60/70 grade) and 0.42% of plastomeric thermoplastics (waste plastic)

21.78.10 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with sensor paver grading II (30-45mm) with
5.4% of modified bituminous binder consisting of 4.97% of VG-30 bitumen
(60/70 grade) and 0.43% of plastomeric thermoplastics (waste plastic)

21.78.11 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical sensor paver grading I (50-
65mm) with 5.2% of modified bituminous binder consisting of 4.78% of VG-30
bitumen (60/70 grade) and 0.42% of plastomeric thermoplastics (waste plastic)

21.78.12 Providing and laying bituminous concrete 40mm thick with hot mix plant, using cum
crushed aggregates of specified grading, premixed with bituminous binder and
filler, transporting the hot mix to work site, laying with a paver finisher to the
required grade, level and alignment, rolling with smooth wheeled, vibratory and
tandem rollers to achieve the desired compaction in all respects complete as
per specifications. Clause 507 of MORTH V revision as per IRC SP-53-2015.
using 40-60 TPH capacity HMP with mechanical paver grading II (30-45mm)
with 5.4% of modified bituminous binder consisting of 4.97% of VG-30 bitumen
(60/70 grade) and 0.43% of plastomeric thermoplastics (waste plastic)

21.79.1 Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision: cum
Providing and laying stone Matrix Asphalt (SMA) using crushed aggregates of
specified grading (as per section 515 of MORTH 5th Revision): premixed with
modified bituminous binder containing Pelletized Cellous fibre at 0.3% (on
loose fibre basis) on the weight of total mix in the batch and filler(Hydrated lime
dust @ 2% of weight of aggregates, transporting the hot mix to work site,
Laying with a paver finisher to the required grade, level and alignment, rolling
with smooth wheeled, Vibratory and tandem rollers to achieve the desired
compaction as per MORTH specifications clause no. 515 complete in all
respects complete as per specification. (Pnumatic tyre roller must not be
used). - using 40/60 TPH capacity H.M.P. with mechanical paver SMA - 45mm
to 75mm, compacted thickness with 5.8% VG-30 bitumen as per MORTH 5
revision clause 515
21.79.2 Stone Matrix Asphalt (SMA) as per section 515 of MORTH 5th Revision: cum
Providing and laying stone Matrix Asphalt (SMA) using crushed aggregates of
specified grading (as per section 515 of MORTH 5th Revision): premixed with
modified bituminous binder containing Pelletized Cellous fibre at 0.3% (on
loose fibre basis) on the weight of total mix in the batch and filler(Hydrated lime
dust @ 2% of weight of aggregates, transporting the hot mix to work site,
Laying with a paver finisher to the required grade, level and alignment, rolling
with smooth wheeled, Vibratory and tandem rollers to achieve the desired
compaction as per MORTH specifications clause no. 515 complete in all
respects complete as per specification. (Pnumatic tyre roller must not be
used). - using 40/60 TPH capacity H.M.P. with mechanical paver SMA - 40mm
to 50mm, compacted thickness with 5.8% VG-30 bitumen as per MORTH 5
revision clause 515.
Basic Rate
21.00

5.00

133.00

43.00

32.00

14.00

23.00

12.00

6,351.00
6,871.00

6,222.00

6,335.00

6,179.00

6,292.00
 414.00

7,248.00

7,806.00

7,113.00

7,671.00

7,065.00
7,626.00

7,748.00

8,274.00

7,728.00

8,263.00

7,681.00

8,218.00
7,650.00

8,176.00

7,629.00

8,155.00

7,776.00

8,110.00

7,882.00
 8,434.00

7,863.00

8,412.00

7,817.00

8,367.00

9,373.00

10,091.00
 9,352.00

10,069.00

9,307.00

10,024.00

8,682.00

9,015.00
8,544.00

8,877.00

8,498.00

8,831.00

8,840.00

9,181.00
 8,704.00

9,045.00

8,658.00

8,999.00

10,475.00

10,908.00

10,456.00
10,887.00

10,410.00

10,841.00

101.00

81.00

149.00

153.00
163.00

166.00

153.00

155.00

179.00

181.00
 173.00

171.00

60.00

47.00

744.00

41.00

12,902.00
11,185.00

12,144.00

30.00

33.00

32.00

69.00

75.00
 94.00

124.00

6,944.00

9,703.00

10,753.00

5,930.00
5,949.00

4,736.00

4,755.00

161.00

156.00
7,527.00

8,038.00

7,505.00

8,016.00

7,460.00
7,971.00

7,618.00

8,139.00

7,596.00

8,118.00
7,551.00

8,073.00

8,438.00

8,758.00

7,993.00
8,620.00

8,144.00

8,771.00

8,546.00

8,872.00
 8,101.00

8,733.00

8,251.00

8,884.00

10,766.00
10,761.00
Item No. Description Unit
22.1.1 KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC cum
1:5:10 base with OPC 25mm and down size graded granite metal coarse
aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-
base, coarse and fine aggregate conforming to IS: 383-2016,aggregate
cement ratio not to exceed 15:1, Aggregate gradation after blending to be as
per Table 600-1,optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in
a batching plant, transported to site, laid with a paver, compacting with 8-10
tonnes vibratory roller, finishing and curing complete as per specifications.
Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 150 kg/cum
and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch
mix Plant at 75 cum/hr capacity with Slip form paver with electronic sensor.

22.1.2 KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC cum
1:5:10 base with OPC 25mm and down size graded granite metal coarse
aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-
base, coarse and fine aggregate conforming to IS: 383-2016,aggregate
cement ratio not to exceed 15:1, Aggregate gradation after blending to be as
per Table 600-1,optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in
a batching plant, transported to site, laid with a paver, compacting with 8-10
tonnes vibratory roller, finishing and curing complete as per specifications.
Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 150 kg/cum
and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch
mix Plant at 75 cum/hr capacity with fixed form paver.

22.1.3 KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC cum
1:5:10 base with OPC 25mm and down size graded granite metal coarse
aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-
base, coarse and fine aggregate conforming to IS: 383-2016,aggregate
cement ratio not to exceed 15:1, Aggregate gradation after blending to be as
per Table 600-1,optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in
a batching plant, transported to site, laid with a paver, compacting with 8-10
tonnes vibratory roller, finishing and curing complete as per specifications.
Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 120 kg/cum
and Fly ash 30 kg/cum conforming to IS:3812, coarse aggregate 0.86cum, fine
aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hr capacity with
Slip form paver with electronic sensor.

22.1.4 KSRRB M600-1.Providing and Constructing dry lean cement concrete mix CC cum
1:5:10 base with OPC 25mm and down size graded granite metal coarse
aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-
base, coarse and fine aggregate conforming to IS: 383-2016,aggregate
cement ratio not to exceed 15:1, Aggregate gradation after blending to be as
per Table 600-1,optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in
a batching plant, transported to site, laid with a paver, compacting with 8-10
tonnes vibratory roller, finishing and curing complete as per specifications.
Clause 601of MORTH V Revision and IS 456 Table-5 with OPC at 120 kg/cum
and Fly ash 30 kg/cum conforming to IS:3812, coarse aggregate 0.86cum, fine
aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hr capacity with
fixed form paver.
22.2.1 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cum
cement Pavement Quality concrete for pavements using Grade concrete M40
having Flexural strength not less than 4.50 Mpa over a prepared base with
OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and
fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V
Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading
materials to batch mix plant by front end loader,mixed in a cement concrete
batch mix plant as per approved mix design,transported to site in transit truck
agitator 5 cum capacity, laid with Paver, compacted and finished in a
continuous operation as per IRC-15 including cost for providing of
contraction,expansion, co nstruction and longitudinal joints, joint filler,
separation membrane of impermiable plastic sheet of 125 micron, groove
cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie
rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to
lines and grades, textured with texturing machine, and curing including cost of
all materials, labour,hire charges of machineries, aII lead & lift charges etc.,
complete as per specifications. Clause 601of MORTH V Revision and IS 456
Table-5 with OPC at 420 kg/cum and coarse aggregate 0.64cum, fine
aggregate 0.36cum using Concrete Batch mix Plant at 75 cum/hr capacity with
Slip form paver with electronic sensor.

22.2.2 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cum
cement Pavement Quality concrete for pavements using Grade concrete M40
having Flexural strength not less than 4.50 Mpa over a prepared base with
OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and
fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V
Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading
materials to batch mix plant by front end loader,mixed in a cement concrete
batch mix plant as per approved mix design,transported to site in transit truck
agitator 5 cum capacity, laid with Paver, compacted and finished in a
continuous operation as per IRC-15 including cost for providing of
contraction,expansion, co nstruction and longitudinal joints, joint filler,
separation membrane of impermiable plastic sheet of 125 micron, groove
cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie
rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to
lines and grades, textured with texturing machine, and curing including cost of
all materials, labour,hire charges of machineries, aII lead & lift charges etc.,
complete as per specifications. Clause 601of MORTH V Revision and IS 456
Table-5 with OPC at 420 kg/cum and coarse aggregate 0.64cum, fine
aggregate 0.36cum using Concrete Batch mix Plant at 75 cum/hr capacity with
Slip form paver with electronic sensor.
22.2.3 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cum
cement Pavement Quality concrete for pavements using Grade concrete M40
having Flexural strength not less than 4.50 Mpa over a prepared base with
OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and
fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V
Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading
materials to batch mix plant by front end loader,mixed in a cement concrete
batch mix plant as per approved mix design,transported to site in transit truck
agitator 5 cum capacity, laid with Paver, compacted and finished in a
continuous operation as per IRC-15 including cost for providing of
contraction,expansion, co nstruction and longitudinal joints, joint filler,
separation membrane of impermiable plastic sheet of 125 micron, groove
cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie
rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to
lines and grades, textured with texturing machine, and curing including cost of
all materials, labour,hire charges of machineries, aII lead & lift charges etc.,
complete as per specifications. Clause 601of MORTH V Revision and IS 456
Table-5 with OPC at 370 kg/cum and GGBS 50 kg/cum conforming to
IS:12089, coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete
Batch mix Plant at 75 cum/hr capacity with Slip form paver with electronic
sensor.

22.2.4 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cum
cement Pavement Quality concrete for pavements using Grade concrete M40
having Flexural strength not less than 4.50 Mpa over a prepared base with
OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and
fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V
Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading
materials to batch mix plant by front end loader,mixed in a cement concrete
batch mix plant as per approved mix design,transported to site in transit truck
agitator 5 cum capacity, laid with Paver, compacted and finished in a
continuous operation as per IRC-15 including cost for providing of
contraction,expansion, co nstruction and longitudinal joints, joint filler,
separation membrane of impermiable plastic sheet of 125 micron, groove
cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie
rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to
lines and grades, textured with texturing machine, and curing including cost of
all materials, labour,hire charges of machineries, aII lead & lift charges etc.,
complete as per specifications. Clause 601of MORTH V Revision and IS 456
Table-5 with OPC at 370 kg/cum and GGBS 50 kg/cum conforming to
IS:12089, coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete
Batch mix Plant at 75 cum/hr capacity with fixed form paver.
22.2.5 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cum
cement Pavement Quality concrete for pavements using Grade concrete M40
having Flexural strength not less than 4.50 Mpa over a prepared base with
OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and
fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V
Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading
materials to batch mix plant by front end loader,mixed in a cement concrete
batch mix plant as per approved mix design,transported to site in transit truck
agitator 5 cum capacity, laid with Paver, compacted and finished in a
continuous operation as per IRC-15 including cost for providing of
contraction,expansion, co nstruction and longitudinal joints, joint filler,
separation membrane of impermiable plastic sheet of 125 micron, groove
cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie
rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to
lines and grades, textured with texturing machine, and curing including cost of
all materials, labour,hire charges of machineries, aII lead & lift charges etc.,
complete as per specifications. Clause 601of MORTH V Revision and IS 456
Table-5 with OPC at 370 kg/cum and Fly ash 50 kg/cum conforming to
IS:3812, coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete
Batch mix Plant at 75 cum/hr capacity with Slip form paver with electronic
sensor.

22.2.6 KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cum
cement Pavement Quality concrete for pavements using Grade concrete M40
having Flexural strength not less than 4.50 Mpa over a prepared base with
OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum,Coarse and
fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V
Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading
materials to batch mix plant by front end loader,mixed in a cement concrete
batch mix plant as per approved mix design,transported to site in transit truck
agitator 5 cum capacity, laid with Paver, compacted and finished in a
continuous operation as per IRC-15 including cost for providing of
contraction,expansion, co nstruction and longitudinal joints, joint filler,
separation membrane of impermiable plastic sheet of 125 micron, groove
cutting,sealant primer joint sealent, debonding strip,dowel bars at 9 kg/cum, tie
rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to
lines and grades, textured with texturing machine, and curing including cost of
all materials, labour,hire charges of machineries, aII lead & lift charges etc.,
complete as per specifications. Clause 601of MORTH V Revision and IS 456
Table-5 with OPC at 370 kg/cum and Fly ash 50 kg/cum conforming to
IS:3812, coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete
Batch mix Plant at 75 cum/hr capacity with fixed form paver

22.3 KSRRB M600-3. Construction of Rolled Cement Concrete mix 1:4:8 OPC cum
cement @180kgs, with 25mm and down size graded granite metal coarse
aggregate at 0.85cum and fine aggregates @0.57cum base course with
coarse and fine aggregate conforming to IS:383, aggregate cement ratio 12:1
and minimum cement content of 180kg/ cum, aggregate gradation to be as per
Table 600-4 after blending, mixing in batching plant at optimum moisture
content, transporting to site, laying with a paver with electronic sensor,
compacting with 8-10 tonnes smooth wheeled vibratory roller to achieve, the
designed flexural strength, finishing and curing complete as per specifications -
22.6.1 Constructing un-reinforced, plain cement concrete for pavements using Grade cum
concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum,
fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-
2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a
concrete mixer of not less than 0.6 cum capacity and appropriate weigh
batcher as per approved mix design, laid in approved fixed side form work
(steel channel, laying and fixing of 125 micron thick polythene film, wedges,
steel plates including levelling the form work as per drawing). & Spreading the
concrete with shovels, rackers compacted using needle, screed and plate
vibrator and finished with floaters in a continuous operation including provision
of contraction, expansion, construction and longitudinal joints,including groove
cutting charges, joint filler, separation membrane of impermiable plastic sheet
of 125 micron, sealant primer, joint sealant, admixtures as approved, curing
compound, finishing to lines and grades, textured with texturing machine, and
curing including cost of all materials, labour,hire charges of machineries,all
lead & lift charges etc., complete as per specifications. with OPC at 360
kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum.

22.6.2 Constructing un-reinforced, plain cement concrete for pavements using Grade cum
concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum,
fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-
2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a
concrete mixer of not less than 0.6 cum capacity and appropriate weigh
batcher as per approved mix design, laid in approved fixed side form work
(steel channel, laying and fixing of 125 micron thick polythene film, wedges,
steel plates including levelling the form work as per drawing). & Spreading the
concrete with shovels, rackers compacted using needle, screed and plate
vibrator and finished with floaters in a continuous operation including provision
of contraction, expansion, construction and longitudinal joints,including groove
cutting charges, joint filler, separation membrane of impermiable plastic sheet
of 125 micron, sealant primer, joint sealant, admixtures as approved, curing
compound, finishing to lines and grades, textured with texturing machine, and
curing including cost of all materials, labour,hire charges of machineries,all
lead & lift charges etc., complete as per specifications. with- with OPC at 320
kg/cum and GGBS 40 kg/cum conforming to IS:12089, coarse aggregate
0.69cum, fine aggregate 0.46cum.

22.6.3 Constructing un-reinforced, plain cement concrete for pavements using Grade cum
concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum,
fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-
2016, with Superplastizer at 3 Its conforming to IS 9103-2008. mixed in a
concrete mixer of not less than 0.6 cum capacity and appropriate weigh
batcher as per approved mix design, laid in approved fixed side form work
(steel channel, laying and fixing of 125 micron thick polythene film, wedges,
steel plates including levelling the form work as per drawing). & Spreading the
concrete with shovels, rackers compacted using needle, screed and plate
vibrator and finished with floaters in a continuous operation including provision
of contraction, expansion, construction and longitudinal joints,including groove
cutting charges, joint filler, separation membrane of impermiable plastic sheet
of 125 micron, sealant primer, joint sealant, admixtures as approved, curing
compound, finishing to lines and grades, textured with texturing machine, and
curing including cost of all materials, labour,hire charges of machineries,all
lead & lift charges etc., complete as per specifications. with- with OPC at 320
kg/cum and GGBS 40 kg/cum conforming to IS:12089, coarse aggregate
0.69cum, fine aggregate 0.46cum.
22.7 Vaccum de-watering with vaccum pump and suction mat and compaction with Sqm
skin floater clubbed with floating disc including cost of generator, HOM of
machinery, Screed Vibratory, Power Floater, blade and disc etc., with all lead
and lift.
22.8.1 Providing groove cutting for width of 5mm to 10mm and depth 80mm- 100mm Rmt.
including cost of cutting machine, generator & HOM of machinery, including
cost of blade,coolant etc., including cleaning of groove & providing sand and
hot bitumen fillars, and filler metal etc., including cost of conveyance of all
materials, labour, lead and lift charges and all other incidental charges as per
drawing and as per specifications. - for concrete pavement

22.8.2 Providing groove cutting for width of 5mm to 10mm and depth 80mm- 100mm Rmt.
including cost of cutting machine, generator & HOM of machinery, including
cost of blade,coolant etc., including cleaning of groove & providing sand and
hot bitumen fillars, and filler metal etc., including cost of conveyance of all
materials, labour, lead and lift charges and all other incidental charges as per
drawing and as per specifications. - for asphalt pavement

22.9 Providing and laying M40 grade high early strength concrete produced by IS0- cum
9001 accredited plants, conforming to is 10262-2009, with strength of 40 MPa
attained at 72 hrs with OPC @ 430 kgs/cum conforming to IS 269-2015,
aggregates 20 mm @ 680 kgs/cum, 12.5 mm @ 430 kgs/ cum & Fine
aggregates (M -Sand I River Sand) conforming to IS 383- 2016 @ 710
kgs/cum and using Mineral admixture such as Ultrafine GGBS, Silica Fumes &
Rice Husk etc@ 50 kgs/cum conforming to IS 456-2000. Fine particles below
75 micron should conform to IS 383- 2016 for fine aggregates. Water content
max. 160 kgs/cum & slump to be between 150 mm to 180 mm with retention of
1 hour at site including cost of all materials, labour charges, scaffolding, curing
& hire charges of machineries etc complete as per the directions of engineer
incharge of the work.
Basic Rate
3,945.00

4,035.00

3,745.00

3,493.00
5,733.00

5,783.00
5,632.00

5,681.00
5,431.00

5,479.00

3,729.00
5,127.00

5,044.00

4,885.00
 68.00

135.00

100.00

7,324.00
Item No. Description Unit
23.1 KSRRB M700-1. Construction of sub surface drain 200 mm dia using M
geotextilestreated with carbon black with physical properties as given in clause
700.2.2.3 formed in to a stable network and a planar geocomposites structure,
joints wrapped with geotextiles to prevent ingress of soil, all as per clause
700.2 and approved drawings including excavation and backfilling complete as
per specifications.MORTH Specification No. 702

23.2 KSRRB M700-2. Construction of a narrow filter sub- surface drain Narrow Filter M
Sub-Surface Drain consisting of porous or perforated pipe laid in narrow trench
surrounded by a geotextiles filter fabric, with a minimum of 450 mm overlap of
fabric and installed as per clause 700.2.3 and 300.9.3.5 including excavation
and backfilling complete as per specifications. MORTH Specification No. 702.4

23.3 KSRRB M700-3. Laying Paving Fabric Beneath a Pavement Overlay:- Sqm
Providing and laying paving fabric with physical requirements as per Table 704-
2 over a tack coat of paving grade Bitumen 80-100 penetration, laid at the rate
of 1 kg per sqm over thoroughly cleaned and repaired surface to provide a
water resistant membrane and crack retarding layer. Paving fabric to be free of
wrinkling and folding and to be laid before cooling of tack coat, brooming and
rolling of surface with pneumatic roller to maximise paving fabric contact with
pavement surface complete as per specifications. MORTH Specification No.
703

23.4 KSRRB M700-4. Laying Boulder Apron in Crates of Synthetic Geogrids:- cum
Providing, preparing and l aying of geogrids crated apron 1 m x 5 m, 600 mm
thick including excavation and backfilling with baffles at 1 metre interval, made
with geogrids having characteristics as per clause 700.4.2, joining sides with
connectors/ring staples, top corners to be tie tensioned, placing of suitable
cross interval ties in layers of 300 mm connecting opposite side with lateral
braces and tied with polymer braids to avoid bulging, constructed as per clause
700.4.3. filled with stone with minimum size of 200 mm and specific gravity not
less than 2.65, packed with stone spalls, keyed to the foundation recess in
case of sloping ground and laid over a layer of geotextiles to prevent migration
of fines, all as per clause 700.4 and laid as per clause 200.5.3.3 and approved
design complete as per specifications.MORTH Specification No. 704
Basic Rate
661.00

754.00

73.00

3,760.00
Item No. Description Unit
24.1 KSRRB 800-1. Painting two coats after filling the surface with synthetic enamel Sqm
paint in approved shades on new plastered concrete surfaces, with materials,
labour complete as per specifications. MORTH Chapter 8
24.2.1 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised No
cautionary, mandatory and informatory sign as per IRC:67 made of high
intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5
mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly designed foundation with M 15
grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as
per approved drawing. 900 M M Equilateral triangle -TYPE XI

24.2.2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised No

cautionary, mandatory and informatory sign as per IRC:67 made of high
intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5
mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly designed foundation with M 15
grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as
per approved drawing. 600 M M Equilateral triangle -TYPE XI

24.2.3 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised No

cautionary, mandatory and informatory sign as per IRC:67 made of high
intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5
mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly designed foundation with M 15
grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as
per approved drawing. 600 MM Circle- TYPE XI

24.2.4 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised No

cautionary, mandatory and informatory sign as per IRC:67 made of high
intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5
mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly designed foundation with M 15
grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as
per approved drawing. 600 X 800 mm - TYPE XI

24.2.5 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised No

cautionary, mandatory and informatory sign as per IRC:67 made of high
intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5
mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly designed foundation with M 15
grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as
per approved drawing. 600 X 450 mm - TYPE XI

24.2.6 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised No

cautionary, mandatory and informatory sign as per IRC:67 made of high
intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5
mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm
firmly fixed to the ground by means of properly designed foundation with M 15
grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as
per approved drawing. 900 M M Octagon Stop Board -TYPE XI

24.3 Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing Sqm
and erecting direction and place identification retro-reflectorised sign as per
IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over
aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on
a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by
means of properly designed foundation with M 15 grade cement concrete 45 x
45 x 60 em, 60 em below ground level as per approved drawing.
24.4 Direction and Place Identification Signs with size morethan 0.9 sqm Size Sqm
Board: Providing and erecting direction and place identification retro-
reflectorised sign as per IRC:67 made of high intensity grade sheeting vide
Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not
exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6
mm , 2 Nos. firmly fixed to the ground by means of properly designed
foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below
ground level as per approved drawing.

24.5 KSRRB MS00-5.1. Over head Signs (Truss and Vertical Support): Tonne
Manufacturing, Supply and installation of retro- reflective Over-Head Gantry
signboards made out of cube corner micro prismatic grade sheeting confirming
to Type XI standards of IRC:67:2012 fixed over 4mm thick Aluminium
Composite Panel sheet, excluding the cost of Type XI retro-reflective sheeting
and 4mm ThickACP sheet with suitable back support frame over a designed
support system of aluminum alloy or galvanised steel trestles and trusses of
section type as per structural design requirements and approved plans
complete as per specifications. Vertical and Lateral Clearance of the Gantry
shall be as per IRC 67 2012 and as per Clause 800.2.2 and 800.2.3 and
installed as per clause 800.2.7.

24.6 KSSRB MS00-5.2 Over Head Sign Board :Supply and installation of retro- Sqm
reflective Over-Head Gantry sign boards made out of cube corner micro
prismatic grade sheeting confirming to Type XI standards of IRC:67:2012
specification & fixed over 4mm thick Aluminium Composite Panel sheet having
minimum 0.30 mm thick aluminum skin on both sides excluding the cost of
back support frame, vertical support and horizontal support and foundation. as
directed by the engineer incharge of the work.

24.7 KSRRB M800- Painting Letters KSRRB M800-6. Painting two coats on New Sqm
Concrete Surface : Painting two coats after filling the surface with synthetic
enamel paint in all shades on new plastered concrete surfaces complete as
per specifications. MORTH Specification No. 803
24.8.1 KSRRB M800-7. Painting:-Providing and applying two coats of ready mix paint Sqm
of approved brand after through cleaning of surface to give an even shade
complete as per specifications. MORTH Specification No. 803 - Painting on
Steel Surface
24.8.2 KSRRB M800-7. Painting:-Providing and applying two coats of ready mix paint Sqm
of approved brand after through cleaning of surface to give an even shade
complete as per specifications. MORTH Specification No. 803 - Painting on
Wood Surface
24.9 KSRRBM800-9. Painting New Letter and Figures of any Shade with synthetic cm
enamel paint black or any other approved colour to give an even shade
complete as per specifications. (“i) Hindi ( Matras commas and the like not to
be measured and paid for half letter shall be counted as half) “ MORTH
Specification No. 803
24.10 KSRRB M800-10. Painting new letter and figures of any shade with synthetic cm
enamel paint black or any other approved colour to give an even shade
complete as per specifications. (“ii) English and Roman - Hyphen and the like
not to be measured and paid for “ MORTH Specification No.801

24.11 KSRRB M800-11.1.Painting lines, dashes, arrows etc.,on Roads in two coats Sqm
on New Work:-Painting lines, dashes, arrows etc on roads in two coats on new
work with ready mixed road marking paint conforming to IS:164 on bituminous
surface, including cleaning the surface of all dirt, dust and other foreign matter,
demarcation at site and traffic control complete as per specifications. i) Over
10 cm in width. MORTH Specification No. 803
24.12 KSRRB M800-11.2. Painting lines, dashes, arrows etc.,on Roads in two coats Sqm
on New Work:-Painting lines, dashes, arrows etc on roads in two coats on new
work with ready mixed road marking paint conforming to IS:164 on bituminous
surface, including cleaning the surface of all dirt, dust and other foreign matter,
demarcation at site and traffic control complete as per specifications.ii) Upto 10
cm in width MORTH Specification No. 803

24.13 KSRRB M800-12.1.Painting lines, dashes, arrows etc.,on Roads in two coats Sqm
on Old Work:-Painting lines, dashes, arrows etc on roads in two coats on old
work with ready mixed road marking paint conforming to IS: 164 on bituminous
surface, including cleaning the surface of all dirt, dust and other foreign matter,
demarcation at site and traffic control complete as per specifications. i) Over
10 cm in width MORTH Specification No. 803

24.14 KSRRB M800-12.2 -Painting lines, dashes, arrows etc.,on Roads in two coats Sqm
on Old Work:-Painting lines, dashes, arrows etc on roads in two coats on old
work with ready mixed road marking paint conforming to IS: 164 on bituminous
surface, including cleaning the surface of all dirt, dust and other foreign matter,
demarcation at site and traffic control complete as per specifications. ii) Upto
10 cm in width MORTH Specification No. 803

24.15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound Sqm
with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of
hot applied thermoplastic compound 2.5 mm thick including reflectorising glass
beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface
applied glass beads as per IRC:35. The finished surface to be level, uniform
and free from streaks and holes complete as per specifications. MORTH
Specification No. 803

24.16 KSRRB 800- Kilometre stone KSRRB M800-14.1. Reinforced cement concrete Nos
M-15 5th Grade kilometre stone of standard design as per IRC:8-1980, fixing in
position including painting and printing etc complete as per
specifications.including additional M-15 concrete pedestal of 0.2mt. height
above G.L. MORTH Specification No. 804
24.17 KSRRB M800-14.2. Reinforced cement concrete M-15 Grade kilometre stone Nos
of standard design as per IRC:8-1980, fixing in position including painting and
printing etc complete as per specifications.including additional M-15 concrete
pedestal of 0.2mt. height above G.L. MORTH Specification No. 804

24.18 KSRRB M800-14.3. Reinforced cement concrete M-15 Grade Hectometer Nos
stone of standard design as per IRC:26-1980, fixing in position including
painting and printing etc complete as per specifications. including additional M-
15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No.
804
24.19 KSRRB MS00-15. Road Delineators: Supply & Installation of Vertical Nos
Delineator having wide angle cube corner micro prismatic non metallic
reflective sheeting confirming to Type XI of IRC 672012 with White and Red
Color combination and having minimum of retro reflective exposed area of 125
Sq CM on top slots & 35 Sq CM on bottom slots and no edges shall be
exposed for tampering. This tubular delineator shall have a core and shell
construction, shell shall be made of tough, high impact resistant, injection-
molded, thermoplastic outer body & the inner core shall consist of powder
coated or painted Mild steel of minimum thickness 1.0mm.& core-shell
structure shall be of height not less than 800 mm above the ground and width
not less than 80 mm. The metallic core of the delineator shall extend 300mm
beyond the shell length from bottom for installing in the ground. The extended
portion of the metallic core having suitable slots to be fixed in M20 grade
Cement Concrete of size 300X300X400 M M with suitable anchoring rods for
enhancing the grip,as per IRC 79 Specifications.

24.20 KSRRB M800-16. Boundry Pillar:- Reinforced cement concrete M-15 grade Nos
boundry pillars of standard design as per IRC:25-1967, fixed in position
including finishing and lettering but excluding painting complete as per
specifications.MORTH Specification No. 806
24.21 KSRRB M800- Fencing/ Railing KSRRB M800-17. G.I. Barbed Wire Fencing M
1.2 Metre High-Providing and fixing 1.2 metres high GI barbed wire fencing
with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres
center to center founded in M15 grade cement concrete, 0.6 metre below
ground level, every 15th post, last but one end post and corner post shall be
strutted on both sides and end post on one side only and provided with 9
horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI
staples, turn buckles etc complete as per clause 800.7 as per specifications.
MORTH Specification No. 807

24.22 KSRRB M800-18. G.I. Barbed Wire Fencing 1.8 Metre High:- Providing and M
fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50
mm x 50 mm x 6 mm placed every 3 metres center to center founded in M-15
grade cement concrete, 0.6 metre below ground level, every 15th post, last but
one end post and corner post shall be strutted on both sides and end post on
one side only and provided with 12 horizontal lines and 2 diagonals interwoven
with horizontal wires, fixed with GI staples, turn buckles etc complete as per
clause 800.7 as per specifications. MORTH Specification No. 807

24.23 KSRRB M800-19. Fencing with Welded Steel Wire Fabric 75mm x 50mm:- M
Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6
mm at 3 metre center to center with 0.40 metre embedded in M15 grade
cement concrete, corner, end and every 10th post to be strutted, provided with
welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and
fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects
as per specifications. MORTH Specification No.Suggestive

24.24 KSRRB M800-20.Tubular Steel Railing on Medium Weight Steel Channel M

(ISMC Series) 100 mm x 50mm:-Providing, fixing and erecting 50 mm dia steel
pipe railing in 3 rows duly painted on medium weight steel channels (ISMC
series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre,
complete as per approved drawings as per specifications. MORTH
Specification No. 808
24.25 KSRRB M800-21.Tubular Steel Railing on Precast RCC Posts, 1.2m High M
Above Ground Level:-Providing, fencing and erecting 50 mm dia painted steel
pipe railing in 3 rows on precast M-20 Grade RCC vertical posts1.8 metres
high (1.2 m above GL) with 3 holes 50 mm dia for pipe, fixed 2 metres centre
to, complete as per approved drawing as per specifications. MORTH
Specification No. 808

24.26 KSRRB M800- Crash Barrier KSRRB M800-22.Reinforced Cement Concrete M

Crash Barrier:- Provision of an Reinforced cement concrete crash barrier at the
edges of the road, approaches to bridge structures and medians, constructed
with M-20 grade concrete with HYSD reinforcement conforming to IRC:21 and
dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded
asphalt filler board, keyed to the structure on which it is built and installed as
per design given in the enclosure to MOST circular No. RW / NH - 33022/1/94-
DO III dated 24 June 1994 as per dimensions in the approved drawing and at
locations directed by the Engineer, all as specified complete as per
specifications. MORTH Specification No. 809

24.27 KSRRB M800-23.1. Metal Beam Crash Barrier:-Providing and erecting a “W” M
metal beam crash barrier comprising of 3 mm thick corrugated sheet metal
beam rail, 70 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m
below ground/road level, all steel parts and fitments to be galvanised by hot
dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to
be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm,
330 mm long complete as per clause 800.10 complete as per specifications
excluding cost of earth work excavation and PCC for fixing. A. Type - A, “W”
MORTH Specification No. 810

24.28 KSRRB M800-23.2. Metal Beam Crash Barrier:-Providing and erecting a M

“Thrie” metal beam crash barrier comprising of 3 mm thick corrugated sheet
metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel
vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15
m below ground level, all steel parts and fitments to be galvanised by hot dip
process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546
mm long complete as per clause 800.10 complete as per specifications.
Excluding cost of earth work excavation & PCC for fixing.B. Type - B, “THRIE”
MORTH Specification No. 810

24.29 KSRRB M800-24. Flexible Crash Barrier, Wire Rope Safety Barrier:- Providing M
and erecting a wire rope safety barrier with vertical posts of medium weight RS
Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m), 1.50 m long 0.85 m above
ground and 0.65 m below ground level, split at the bottom for better grip,
embedded in M-15 Grade cement concrete 450 x 450 x 450 mm, 1.50 m
center to center and with 4 horizontal steel wire rope 40 mm dia and anchored
at terminal posts 15 m apart. Terminal post to be embedded in M 15 grade
cement concrete foundation 2400 x 450 x 900 mm (depth), strengthened by a
strut of RS joist 100 x 75 mm, 2 m long at 45º inclination and a tie 100 x 8 mm,
1.50 m long at the bottom, all embedded in foundation concrete as per
approved design and drawing, rate excluding excavation and cement concrete
complete as per specifications Excluding cost of earth work excavation & PCC
for fixing. MORTH Specification No. Suggestive
24.30 KSRRB M800- Anti-Glare devices in Median KSRRB M800-26.2. Providing Each
and erecting an anti - glare screen with 25 mm dia vertical pipes fabricated and
framed in the form of panels of one metre length and 1.75 metre height fixed
with circular vane 250 mm dia at top and rectangular vane 600 x 300 mm at
the middle, made out of steel sheet of 3 mm thickness, end vertical pipes of
the panel made larger for embedding in foundation concrete, applying 2 coats
of paint on all exposed surfaces, all as per approved design and drawings
complete as per specifications. B. Anti-glare screen with 25 mm steel pipe
framework fixed with circular and rectangular vanes Excluding cost of earth
work excavation & PCC for fixing. MORTH Specification No. Suggestive

24.31 KSRRB M800-26.3. Providing and erecting anti - glare screen with rectangular M
vanes of size 750 x 500 mm made from MS sheet, 3 mm thick and fixed on MS
angle 50 x 50 x 6 mm at an angle of 45º to the direction of flow of traffic, 1.5 m
center to center, top edge of the screen 1.75 m above ground level, vertical
post firmly embedded in M-15 cement concrete foundation 0.60 m below
ground level, applying 2 coats of paint on exposed faces, all complete as per
approved design and drawings complete as per specifications.C. Anti-glare
screen with rectangular vane MS sheet. Excluding cost of earth work
excavation & PCC for fixing. MORTH Specification No. Suggestive

24.32 KSRRB M800 - Street lighting KSRRB M800-27. Providing and erecting street Each
light mounted on a steel circular hollow pole of standard specifications for
street lighting, 9 m high spaced 40 m apart, 1.8 m overhang on both sides if
fixed in the median and on one side if fixed on the footpath, fitted with sodium
vapour lamp and fixed firmly in concrete foundation complete as per
specifications. Excluding cost of earth work excavation & PCC for fixing.
MORTH Specification No. Suggestive

24.33 KSRRB M800-28. Lighting on Bridges :- Providing and fixing lighting on Each
bridges, mounted on steel hollow circular poles of standard specifications, 5 m
high fixed on parapets with cement concrete, 20 m apart and fitted with sodium
vapour lamp complete as per specifications
24.34 KSRRB M800- Cable Duct Across the road KSRRB M800-29.1. Providing and M
laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road
(new construction), extending from drain to drain in cuts and toe of slope to toe
of slope in fills, constructing head walls at both ends, providing a minimum fill
of granular material over top and sides of RCC pipe as per IRC:98-1997,
bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to
outer distance of pipe at least half dia of pipe subject to minimum450 mm in
case of double and triple row ducts, joints to be made leak proof, invert level of
duct to be above higher than ground level to prevent entry of water and dirt, all
as per IRC: 98 - 1997 and approved drawings complete as per specifications.
Case - I : Single row for one utility service

24.35 KSRRB M800-29.2. Cable Duct Across the road KSRRB M800-29.1. Providing M
and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the
road (new construction), extending from drain to drain in cuts and toe of slope
to toe of slope in fills, constructing head walls at both ends, providing a
minimum fill of granular material over top and sides of RCC pipe as per
IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock
pieces, outer to outer distance of pipe at least half dia of pipe subject to
minimum450 mm in case of double and triple row ducts, joints to be made leak
proof, invert level of duct to be above higher than ground level to prevent entry
of water and dirt, all as per IRC: 98 - 1997 and approved drawings complete as
per specifications. Case - II : Double row for two utility services
24.36 KSRRB M800-29.3.Cable Duct Across the road KSRRB M800-29.1. Providing M
and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the
road (new construction), extending from drain to drain in cuts and toe of slope
to toe of slope in fills, constructing head walls at both ends, providing a
minimum fill of granular material over top and sides of RCC pipe as per
IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock
pieces, outer to outer distance of pipe at least half dia of pipe subject to
minimum450 mm in case of double and triple row ducts, joints to be made leak
proof, invert level of duct to be above higher than ground level to prevent entry
of water and dirt, all as per IRC: 98 - 1997 and approved drawings complete as
per specifications. Case-III :Triple row for three utility services.

24.37 KSRRB M800-Gantry mounted variable message sign board KSRRB M800- Tonne
33.1. Providing and erecting gantry mounted variable message sign board
electronically operated capable of flashing the desired message over a
designed support system of aluminium alloy or galvanised steel, erected as per
approved design and drawings and with lateral clearance as per clause
800.2.3 complete as perspecifications. i) Gantry Support System

24.38 KSRRB M800-34Traffic input attenuators at abutments and piers KSRRB Sqm
M800-34.1. Providing and installation of traffic attenuators at abutment/pier of
flyovers bridges using scrap tyres of size 100 x 20 retrieved from trucks laid in
2 rows and 4 tiers, one above the other and tied with 20 mm wire rope as per
approved design and drawings complete as per specifications
24.39 KSRRB M800-34.2. Providing and installation of traffic impact attenuator at Sqm
abutment/pier of flyovers bridges using plastic/steel barrels 0.60 m dia and 1.0
m in height, filled with sand in three rows and tied with20 mm steel wire rope
as per approved design and drawings complete as per specifications. B. Using
Plastic / steel Barrel, Filled with Sand
24.40 KSRRB M800-34.3. Providing and installing a patentend HI - DRO cell system Sqm
as a traffic impact attenuators, using plastic tubes 50 cm dia, 1.2 m in height,
25 mm opening at the top, placed in three rows, filled with water and tied with a
20 mm steel wire rope complete as per specifications. (In this patented HI -
DRO cell system, water gets discharged from plastic tubes on impact over a
pre-determined time, thus absorbing the energy) C. With HI - DRO Cell
Sandwich (Patented)

24.41 KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and Nos
lnstalltion of Moulded Shank Raised Pavement Markers made of
polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and
reflective panels with micro prismatic lens capable of providing total internal
reflection of the light entering the lens face and shall support a load of 16000
kg tested in accordance to Specifications of Category A of MORTH Circular No
RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall
not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of
13 Sqcm on each side and the slope to the base shall be 35 degree. The
strength of detachment of the integrated cylindrical shanks, (of diameter not
less than 19 mm and height not less than 30 mm) from the body is to be a
minimum value of 500 Kg. Fixing will be by drilling holes on the road for the
shanks to go inside, without nails and using epoxy resin based adhesive as
per manufacturer's recommendation and complete as directed by the engineer

24.42 KSRRB M800- Traffic cone KSRRB M800-36. Provision of red fluorescent with Nos
white reflective sleeve traffic cone made of low density polyethylene (LDPE)
material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4
kg in weight, placed at 1.5 m interval, all as per BS: 873 complete as per
specifications
24.43 KSRRB M800- policeman umbrella KSRRB M800-39. Provision of a 2 m high Nos
(floor to roof) umbrella for traffic policeman at road crossings, where
necessary, installed on a raised platform, built on a central support of a steel
pipe 100 mm dia, roof made of 25 mm dia steel pipe to provide covered area of
3 sqm, roofed with CGI sheets, all steel parts to be given 2 coats of paint
complete as per specifications

24.44 KSRRB M800-Portable barricade in construction zone KSRRB M800-43. Each

Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5
m in length fitted on a ‘A’ frame made with 45 x 45 x 5 mm angle iron section,
1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes,
150 mm in width at an angle of 45º, ‘A’ frame painted with 2 coats of yellow
paint, complete as per IRC:SP:55-2001 complete as per specifications.

24.45 KSRRB M800-Permanent type barricade in construction zone KSRRB M800- Each
44.1. Construction of a permanent type barricade made of steel components,
1.5 m high from road level, fitted with 3 horizontal rails 200 mm wide and 4 m
long on 50 x 50 x 5 mm angle iron vertical support, painted with yellow and
white strips, 150 mm in width at an angle of 45º, complete as per IRC:SP:55-
2001 complete as per specifications . A. With steel components

24.46 KSRRB M800-44.2. Construction of a permanent type barricade made of Each

wooden components, 1.5 m high from road level, fitted with 3 horizontal planks
200 mm wide and 3.66 m long on 100 x 100mm wooden vertical post, painted
with yellow and white strips, 150 mm in width at an angle of 45º, complete as
per IRC:SP:55-2001 complete as per specifications. B. With Wooden
components

24.47 KSRRB M800-44.3. Construction of a permanent type barricade made with Each
brick work in mud mortar, 1.5 m high, 4 m long, 600 mm thick, plastered with
cement mortar 1:6, painted with yellow and white strips complete as per
specifications. C. With bricks
24.48 KSRRB M800-Drum delineator in construction zone KSRRB M800-45. Each
Provision of metal drum/empty bitumen drum delineator, 300 mm in diameter,
800 mm high, filled with earth for stability, painted in circumferential strips of
alternate black and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm
dia, all as per IRC:SP:55- 2001 complete as per specifications.

24.49 KSRRB M800-Flagman KSRRB M800-46. Positioning of a smart flagman with Each
a yellow vest and a yellow cap and a red flag 600 x 600 mm securely fastened
to a staff 1 m in length for guiding the traffic complete as per specifications

24.51 Removing and verifying guard stones/KM stones/ boundary stones, in a Each
complete manner embedded in earth excluding painting.
24.52 Providing and fixing RCC precast guard stones of size 0.23mx0.23mx1.5m Each
casted in cc 1:1.5:3 with 20mm down size aggregates using 10mm dia vertical
4TMT steel rods and 8 mm dia stirrups at 20 cm c/c fixed 0.90 m above
Ground level using steel moulding, Curing, transportation to work spot
including excavation in hard soil fixing in plain cement concrete 1:2:4 using
20mm downsize aggregate including aligning to plumb and line providing
enamel painting to exposed faces in alternate black and white strips and
painting with reflective paint on top of guard stone with a width of 10 cm
including cost of all materials, labour, hire charge of machineries complete.
( As per drawing)
24.53 Supply & installation of Aluminum-backed flexible prismatic sheeting made of Sqft
Yellow coloured flexible prismatic sheeting with non-metallic prismatic lens,
formed in a transparent, synthetic resin, as retroreflective elements mounted
on a Aluminum (AI) foil with a pre-coated pressure sensitive adhesive and
easily removable liner,containing screen printed arrow/slant line pattern in
black color in a continuous roll format and the sheeting shall be extremely
flexible and easy to bend or wrap around obJects, capable of exhibiting very
high conformability and non-returning dead-fold characteristics required for
application on rough and uneven surfaces.

24.54 Supply & Installation of Flexible Median Markers made of combination of Nos
tough, high impact resistant molded thermoplastic body with U shape structure
& rebound property & exposed body structure should be cornered rounded for
better aesthetics. The flexible median marker shall have U shaped florescent
yellow color retro-reflective sheeting with minimum exposed reflective area 15
cm2. The reflective sheeting should confirm to Type XI Florescent Yellow
sheeting as per IRC 67 2012 .The third party test report for reflective sheeting
shall be submitted along with product information. The product design has to
with stand all natural impacts and should not get damaged if any pedestrian
stamp on top of it intentionally or unintentionally. The product should bend up
to 90 degree on both sides (becoming completely horizontal), it should be able
to take minimum 500 stamping without any significant damage. The Flexible
Median Marker shall be fixed by a combination of epoxy adhesive and
grouting/Drilling as recommended by manufacturer.

24.55 Supply & Installation of Solar Raised Pavement Markers made of Nos
polycarbonate molded body with circular shape, solar powered, LED self
illumination in active mode, 360 degree illumination and reflective panels with
micro prismatic lens in passive mode. The marker shall support a load of20000
kg tested in accordance to IRC 37 and shall be resistantto dust and water
ingress according to IP 65 (Ingress Protection 65 is a test which is conducted
to check if solar road stud is protected from total dust Ingress and low pressure
water jets from any direction) standards and should withstand temperatures in
the range of 0 C to 70 C. Color of lighting could be provided in red or yellow
(amber) as per requirement and typical frequency of blinking is 1 Hz. There
should be current losses of less than 20 micro-amperes at 2.4 V in sleep-
charging mode to enhance the life of the marker and a full charge should
provide for a minimum autonomy of 50 hours. The height, width and length of
the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the
surface diameter of the marker shall not be less than 100 mm respectively. The
weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling
holes on the road for the shanks to go inside, without nails and using epoxy
resin based adhesive as per manufacturer's recommendation and complete as
directed by the engineer.
24.56 Supply & Installation of Rigid Median Marker made of tough, high impact Nos
resistant, inJection-molded, thermoplastic body with an isosceles trapezoidal
structure of length, width and height not less than 15cm, 10cm and 10cm
respectively and thickness not less than 1.8mm, the body structure shall be
rounded suitably. The plastic used for molding the Median Marker shall
conform to ASTM D256. The logo of the manufacturer shall be embossed on
either side of the body in the injection molding process. The Median Marker
shall have rectangular-shaped, fluorescent yellow color retro-reflective
sheeting of size not less than 8.5cm*8.5cm and with fully reflective micro
prismatic cube corners as its retro-reflective elements as per IRC 67 2012. The
retro-reflective sheeting shall be a one or both sides of the Median Marker and
shall be edge protected with no exposed edges which will prevent edge lifting,
vandalism, sheeting damage, etc. The Median Marker shall be fixed by a
combination of epoxy adhesive and grouting.

24.58 Manufacturing,Supply and installation of Retro- reflective Hazard Marker Sqm

signbaords made out of cube corner micro prismatic grade sheeting confirming
to Type XI standards of IRC672012 & ASTM D 4956-09 specification & fixed
over 4 mm thick Aluminium Composite Panel sheet having minimum 0.30 mm
thick aluminum skin on both sides & fixed over back support frame of 25x25x
3mm MS angle frame. Supported on round pipe post of 1.5 Meters height and
gouted 60 em below ground level. The sign post should be painted with one
coat of red oxide paint and two coats of synthetic enamel paint of black and
firmly fixed to the ground by means of foundation with M 20 grade cement,
concrete foundation size of 45 em x 45 em x 60 em including cost &
conveyance of all materials, equipment, machinery & Labour with all leads and
lifts, Loading charges necessary for satisfactory completion of the work as
directed by engineer incharge.

24.59 Supply and fixing of Retro Reflective Single Arrow Road Name Signboard of Sqm
size 1600mm x 900mm made out of retro reflective sheeting conforming to
Type XI standards of ASTM D 4956-09 & as per IRC 67-2012 for full back
ground of blue colour & white letters and fixed over 4 mm thick Aluminium
Composite Material sheet having minimum 0.5 mm thick Aluminium skin on
both sides with back side painted grey colour and fixed over back support
frame SS angle of 15mm x 20mm x 1.2mm, supported by 38mm OD stainless
steel pipe all round in 304 grade and 2 nos of vertical posts of 50 mm OD
stainless steel pipe of 202 grade firmly fixed to the ground by means of
properly designed foundation of size 450mm x 450mm x 600mm in 1:1.5:3
ratio cement concrete. The background shall be blue in color with letters and
border in white, the item includes earthwork excavation, cost of all materials,
loading, unloading, lead, lift, transportation etc., complete. as per direction of
engineer incharge of work clause 6.9 of IRC 67-2012 for Type XI retro
reflective sheeting from the sheeting manufacturer & a certified copy of test
reports from an independent test laboratory conforming to clause 6.7 of IRC
67-2012 including outdoor weather exposure report for the retro reflective
sheeting offered shall be submitted by the contractor for technical qualification
in the tender
24.60 Supply and fixing of Retro Reflective Single arrow road name sign board of Sqm
size 2000mm x 900mm made out of retro reflective sheeting conforming to
Type XI standards of ASTM D 4956 - 09 & as per IRC 67-2012 for full back
ground of blue colour & white letters and fixed over 4 mm thick Aluminium
Composite Material sheet having minimum 0.5 mm thick Aluminium skin on
both sides with back side painted grey colour and fixed over back support
frame SS angle of 15mm x 20mm x 1.2mm, supported by 38mm OD stainless
steel pipe all round in 304 grade and 2 nos of vertical posts of 50 mm OD
stainless steel pipe of 202 grade firmly fixed to the ground by means of
properly designed foundation of size 450mm x 450mm x 600mm in 1:1.5:3
ratio cement concrete. The background shall be blue in color with letters and
border in white, the item includes earthwork excavation, cost of all materials,
loading, unloading, lead, lift, transportation etc., complete. as per clause 6 9 of
IRC 67-2012 for Type XI retro reflective sheeting from the sheeting
manufacturer & a certified copy of test reports from an independent test
laboratory conforming to clause 6.7 of IRC 67-2012 including outdoor weather
exposure report for the retro reflective sheeting offered shall be submitted by
the contractor for technical qualification in the tender.
Basic Rate
80.00

3,700.00

2,706.00

3,306.00

4,238.00

3,245.00

5,146.00

7,136.00
 7,458.00

70,647.00

9,525.00

82.00

72.00

79.00

1.00

0.70

146.00
 125.00

130.00

111.00

429.00

3,631.00

2,270.00

581.00
1,852.00

496.00

230.00

390.00

603.00

1,540.00
1,252.00

3,314.00

2,187.00

3,357.00

2,080.00
 2,455.00

848.00

10,815.00

6,990.00

1,826.00

3,386.00
 4,972.00

67,467.00

1,343.00

1,325.00

762.00

289.00

411.00
 4,591.00

2,889.00

4,465.00

7,079.00

16,583.00

524.00

549.00

51.00

2,548.00
 788.00

353.00

2,961.00
 445.00

4,668.00

13,297.00
15,785.00
Item No. Description Unit
25.1.1 KSRRB 1100-1. Bored I Cast-in-situ R.C.C. 1000mm dia piles with OPC design M
mix with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as per
drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M20, 1000mm dia piles 320 Kg
Cement, C.A. 0.69 M', F.A 0.46 M' Note: The above items ie. 25.1, 25.1.1,
25.1.2, are to adopted only after obtaining approval from S.E.

25.1.2 KSRRB 1100-1. Bored I Cast-in-situ R.C.C. 1000mm dia piles with OPC design M
mix with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as per
drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M30, 1000mm dia piles 360 Kg
Cement, C.A. 0.69 M', F.A 0.46 M' Note: The above items ie. 25.1, 25.1.1,
25.1.2, are to adopted only after obtaining approval from S.E.

25.1.3 KSRRB 1100-1. Bored I Cast-in-situ R.C.C. 1000mm dia piles with OPC design M
mix with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as per
drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M35, 1000mm dia piles 390 Kg
Cement, C.A. 0.69 M', F.A 0.45 M' Note: The above items ie. 25.1, 25.1.1,
25.1.2, are to adopted only after obtaining approval from S.E.

25.2.1 KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500mm dia. piles with M
OPC design mix with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser
@31ts confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as
per drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M20, 500mm dia piles 320 Kg
Cement, C.A. 0.69 M', F.A 0.46 M 3

25.2.2 KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500mm dia. piles with M
OPC design mix with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser
@31ts confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as
per drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M30, 500mm dia piles 360 Kg
Cement, C.A. 0.69 M', F.A 0.46 M'

25.2.3 KSRRB 1100-2. Driving cast-in-place vertical R.C.C. 500mm dia. piles with M
OPC design mix with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregtes @ 0.46cum, with superplastisiser
@31ts confirming to IS9103-1999 Reaffirmed-2008 excluding reinforcement as
per drawings including cost of all materials, labour, HOM complete as per
specifications. MORTH specification No. 1100 M35, 500mm dia piles 390 Kg
Cement, C.A. 0.69 M', F.A 0.45 M'

25.3 KSRRB M1100-3.1. Bored cast-in-situ R.C.C. Pile with OPC cement design M
mix M35 @ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregtes @ 0.45cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, excluding Reinforcement
complete as per Drawing and Technical Specifications and removal of
excavated earth with all lifts and lead upto 1000 m complete as per
specifications. A. Pile diametre =750 mm MORTH Specification No.1100 &
1700
25.4 KSRRB M1100-3.2. Bored cast-in-situ R.C.C. Pile with OPC cement design M
mix M35 @ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregtes @ 0.45cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, excluding Reinforcement
complete as per Drawing and Technical Specifications and removal of
excavated earth with all lifts and lead upto 1000 m complete as per
specifications. B. Pile diametre = 1000 mm MORTH Specification No.1100,
1600 & 1700

25.5 KSRRB M1100.3.3. Bored cast-in-situ R.C.C. Pile with OPC cement design M
mix M35 @ 390kgs, with 20mm and down size graded granite metal coarse
aggregates @0.68cum and fine aggregtes @ 0.45cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, excluding Reinforcement
complete as per Drawing and Technical Specifications and removal of
excavated earth with all lifts and lead upto 1000 m complete as per
specifications.- C. Pile diametre = 1200 mm MORTH Specification No.1100 &
1700

25.6 KSRRB M1100 Driven cast-in-place R.C.C. Pile KSRRB M1100-4.1. Driven M
cast-in-place vertical R.C.C. Pile with OPC cement design mix M35 @ 390kgs,
with 20mm and down size graded granite metal coarse aggregates @0.68cum
and fine aggregtes @ 0.45cum, with superplastisiser @3lts confirming to
IS9103-1999 Reaffirmed-2008, excluding Reinforcement complete as per
Drawing and & Technical Specification complete as per specifications. Pile
diametre = 750 mm MORTH Specification No.1100 & 1700

25.7 KSRRB M1100-4.2. Driven cast-in-place vertical R.C.C. Pile with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications. Pile diametre = 1000 mm MORTH Specification
No.1100 & 1700

25.8 KSRRB M1100-4.3. Driven cast-in-place vertical R.C.C. Pile with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
uperplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications. Pile diametre = 1200 mm MORTH Specification
No.1100 & 1700

25.9 KSRRB M1100-4.4. Driven precast vertical R.C.C. Piles with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications.Pile diametre = 500 mm MORTH Specification
No. 1100 & 1700

25.10 KSRRB M1100-4.5. Driven precast vertical R.C.C. Piles with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications- Pile diametre = 750 mm MORTH Specification
No. 1100 & 1700
25.11 KSRRB M1100-4.6. Driven precast vertical R.C.C. Piles with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications Pile diametre = 1000 mm MORTH Specification
No.1100 & 1700

25.12 KSRRB M1100-4.7. Driven precast vertical R.C.C. Piles with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications. Size of pile = 300 mm x 300 mm MORTH
Specification No.1100 & 1700

25.13 KSRRB M1100-4.8. Driven precast vertical R.C.C. Piles with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications. Size of pile = 500 mm x 500 mm MORTH
Specification No.1100 & 1700

25.14 KSRRB M1100-4.9. Driven precast vertical R.C.C. Piles with OPC cement M
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregtes @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, excluding
Reinforcement complete as per Drawing and & Technical Specification
complete as per specifications. Size of pile = 750 mm x 750 mm MORTH
Specification No.1100 & 1700

25.15 KSRRB M1100-5. Driven Vertical Steel Piles as per Drawing and & Technical M
Specification complete as per specifications. Section of the pile =H Section
steel column 400 x 250 mm (ISHB Series) MORTH Specification No.1100 &
1900
25.16 KSRRB M1100-6. Driven Vertical Steel Piles as per Drawing and & Technical M
Specification complete as per specifications. Section of the pile =H Section
steel column 450 x 250 mm (ISHB Series) MORTH Specification No.1100 &
1900
25.18 KSRRB M1100- Pile Cap KSRRB M1100-8.1. Cement Concrete for Reinforced cum
Concrete in Pile Cap as per Drawing and Technical Specification complete as
per specifications. A. RCC with OPC cement design mix M20 @ 320kgs, with
20mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008 Case-I: Using Concrete Mixer MORTH Specification
No.1100, 1500 & 1700

25.19 KSRRB M1100-8.2. Pile Cap KSRRB M1100-8.1. Cement Concrete for cum
Reinforced Concrete in Pile Cap as per Drawing and Technical Specification
complete as per specifications A. RCC with OPC cement design mix M20 @
320kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregtes @ 0.46cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case-II: Using Batching Plant,
Transit Mixer and Concrete Pump MORTH Specification No.1100, 1500 & 1700
25.20 KSRRB M1100-9.1. Cement Concrete for Reinforced Concrete in Pile Cap as cum
per Drawing and Technical Specification complete as per specifications. B.
RCC with OPC cement design mix M25 @ 340kgs, with 20mm and down size
graded granite metal coarse aggregates @0.7cum and fine aggregtes @
0.47cum, with superplastisiser @3lts confirming to IS9103- 1999 Reaffirmed-
2009. Case-I: Using Concrete Mixer MORTH Specification No.1100, 1500 &
1700

25.21 KSRRB M1100-9.2. KSRRB M1100-9.1. Cement Concrete for Reinforced cum
Concrete in Pile Cap as per Drawing and Technical Specification complete as
per specifications. B. RCC with OPC cement design mix M25 @ 340kgs, with
20mm and down size graded granite metal coarse aggregates @0.7cum and
fine aggregtes @ 0.47cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2009. Case-II: Using Batching Plant, Transit Mixer and
Concrete Pump MORTH Specification No.1100, 1500 & 1700

25.22 KSRRB M1100-10.1. Cement Concrete for Reinforced Concrete in Pile Cap cum
per Drawing and Technical Specification complete as per specifications. C.
RCC with OPC cement design mix M30 @ 360kgs, with 20mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregtes @
0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008. Case-I: Using Concrete Mixer MORTH Specification No.1100, 1500 &
1700

25.23 KSRRB M1100-10.2. KSRRB M1100-10.1. Cement Concrete for Reinforced cum
Concrete in Pile Cap per Drawing and Technical Specification complete as per
specifications. C. RCC with OPC cement design mix M30 @ 360kgs, with
20mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregtes @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case-II: Using Batching Plant, Transit Mixer and
Concrete Pump MORTH Specification No.1100, 1500 & 1700

25.24 KSRRB M1100-11.1. Cement Concrete for Reinforced Concrete in Pile Cap cum
complete as per Drawing and Technical Specification complete as per
specifications.D. RCC with OPC cement design mix M35 @ 390kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregtes @ 0.45cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case-I: Using Concrete Mixer MORTH Specification
No.1100, 1500 & 1700

25.25 KSRRB M1100-11.2. -Cement Concrete for Reinforced Concrete in Pile Cap cum
complete as per Drawing and Technical Specification complete as per
specifications. D. RCC with OPC cement design mix M35 @ 390kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregtes @ 0.45cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case-II: Using Batching Plant, Transit Mixer and
Concrete Pump MORTH Specification No.1100, 1500 & 1700

25.26 KSRRB M1100-Levelling course for Pile Cap KSRRB M1100-12. Providing and cum
laying of PCC M 15 levelling course 100 mm thick below the pile cap complete
as per specifications MORTH Specification No.1100 & 1700
25.27.2 KSRRB M1100-13. Providing and Placing un-coated TMT steel reinforcement Tonne
for RCC work including straightening, cutting, bending, hooking, placing in
position of lapping and I or welding wherever required, tying with binding wire
and anchoring to the adjoining members wherever necessary complete as per
design (Flats, hooks & wastage shall not be measured and paid) including cast
of materials, labours, HOM complete as per specifications. MORTH
Specification No.1600 & 2200 TMT bars Fe 500
25.27.3 KSRRB M1100-13. Providing and Placing un-coated TMT steel reinforcement Tonne
for RCC work including straightening, cutting, bending, hooking, placing in
position of lapping and I or welding wherever required, tying with binding wire
and anchoring to the adjoining members wherever necessary complete as per
design (Flats, hooks & wastage shall not be measured and paid) including cast
of materials, labours, HOM complete as per specifications. MORTH
Specification No.1600 & 2200 - TMT bars Fe 550

25.28 KSRRB M1100-14. Supplying, fitting and placing un-coated Mild steel Tonne
reinforcement in foundation as per drawing and technical specification
complete as per specifications MORTH Specification No.1600
25.29 Trail Bores : Drilling 80mm dia hole through all kinds of soil using casing shoe M
bit vertical or inclined up to 10 degree to vertical, as directed includ- ing cost of
materials, machineries, labour, water charges, remaining, collection of wash
samples at suitable intervals, logging and leaving, supplying honne wood core
box, fixing casing pipes (excluding cost of casing pipes etc., complete.

25.30 Trail Bores : Drilling 76mm dia (NX) core hole in soft rock using diamond core M
bit vertical or inclined up to 10 degree to vertical, as directed in- cluding cost of
materials, machineries, labour, water charges, collection of core samples,
logging and leaving, supplying honne wood core box including cement
grounding (excluding cost of cement for grouting) and re-drilling in case of
collapse of sides etc., complete.

25.31 Trail Bores : Drilling 76 mm dia (NX) core hole in Hard rock using dia- mond M
core bit vertical or inclined up to 10 degree to vertical as directed including cost
of materials, machineries, labour, including cement grouting (excluding cost of
cement for grouting) and re-drilling incase of collapse of sides etc., complete.
Basic Rate
22,967.00

22,798.00

22,907.00

7,779.00

7,737.00

7,765.00

4,823.00
7,752.00

8,676.00

3,923.00

6,351.00

9,270.00

1,813.00

3,142.00
5,277.00

1,207.00

2,044.00

3,977.00

5,089.00

5,746.00

5,827.00

5,069.00
5,989.00

5,402.00

6,108.00

5,395.00

6,259.00

5,664.00

4,689.00

67,311.00
67,894.00

67,471.00

1,389.00

2,416.00

4,416.00
Item No. Description Unit
26.1 KSRRB M1200- Temporary Island KSRRB M1200-1.1. Providing and No
Constructing Temporary Island 16 m diameter for Construction of Well
Foundation for 8m dia Well complete as per specifications. MORTH
Specification No. 1200
26.2 KSRRB M1200-1.2. Providing and Constructing Temporary Island 16 m No
diameter for Construction of Well Foundation for 8m dia Well complete as per
specifications. B. Assuming depth of water 4.0 m and height of island 4.5m
MORTH Specification No. 1200
26.3 KSRRB M1200-1.3. Providing and Constructing Temporary Island 16 m M
diameter for Construction of Well Foundation for 8m dia Well complete as per
specifications. C. Providing and constructing one span service road to reach
island location from one pier location to another pier location- Assuming span
length 30 m, width of service road 10 m & depth of water 1 mMORTH
Specification No. 1200
26.4 KSRRB M1200- Providing and Laying Cutting Edge of Mild Steel KSRRB Tonne
M1200-2. Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per
metre for Well Foundation complete as per Drawing and Technical
Specification complete as per specifications MORTH Specification No.1200 &
1900
26.5 KSRRB M1200-3.1. Plain / Reinforced Cement Concrete, in Well Foundation
complete as per Drawing and Technical Specification. MORTH Specification
No. 1200,1500 & 1700 -
26.5.1 KSRRB M1200-3.1 i) RCC with OPC cement design mix M20 @ 320kgs, with cum
20mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.2 KSRRB M1200-3.2 ii) RCC with OPC cement design mix M25 @ 340kgs, with cum
20mm and down size graded granite metal coarse aggregates @0.7cum and
fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.3 KSRRB M1200-3.3. iii) RCC with OPC cement design mix M35 @ 390kgs, with cum
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.4 KSRRB M1200-4.1. i) PCC with OPC cement design mix M15 @ 240kgs, with cum
40mm and down size graded granite metal coarse aggregates @0.63cum and
fine aggregates @ 0.42cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.5 KSRRB M1200-4.2. ii) PCC with OPC cement design mix M20 @ 300kgs, with cum
40mm and down size graded granite metal coarse aggregates @0.64cum and
fine aggregates @ 0.43cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.6 KSRRB M1200-4.3. iii) RCC with OPC cement design mix M20 @ 320kgs, with cum
20mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.7 KSRRB M1200-4.4. iv) PCC with OPC cement design mix M25 @ 340kgs, with cum
40mm and down size graded granite metal coarse aggregates @0.7cum and
fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.8 KSRRB M1200-4.5. v) RCC with OPC cement design mix M25 @ 340kgs, with cum
20mm and down size graded granite metal coarse aggregates @0.7cum and
fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.9 KSRRB M1200-4.6. vi) PCC with OPC cement design mix M30 @ 360kgs, with cum
40mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008
26.5.10 KSRRB M1200-4.7. vii) RCC with OPC cement design mix M30 @ 360kgs, cum
with 20mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.11 KSRRB M1200-4.8 viii) RCC with OPC cement design mix M35 @ 390kgs, cum
with 20mm and down size graded granite metal coarse aggregates @0.68cum
and fine aggregates @ 0.45cum, with superplastisiser @3lts confirming to
IS9103-1999 Reaffirmed-2008
26.5.12 cum
KSRRB M1200-4.9. ix) RCC with OPC cement design mix M40 @ 420kgs,
with 20mm and down size graded granite metal coarse aggregates @0.67cum
and fine aggregates @ 0.44cum, with superplastisiser @3lts confirming to
IS9103-1999 Reaffirmed-2008 - Using Batching Plant, Transit Mixer and
Concrete PumpMORTH Specification No.1200,1500 & 1700

26.6 cum
KSRRB M1200-5.1. Plain / Reinforced Cement Concrete, in Well Foundation
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe. C. Bottom Plug: i) PCC with 43 grade cement design mix
M20 @ 320kgs, with 40mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008. Case - I : Using Concrete
Mixer. MORTH Specification No.1200,1500 & 1700

26.7 cum
KSRRB M1200-5.2. Plain / Reinforced Cement Concrete, in Well Foundation
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe i) PCC with OPC cement design mix M20 @ 320kgs, with
20mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case - II : Using Batching Plant, Transit Mixer and
Crane / Concrete PumpMORTH Specification No.1200,1500 & 1700

26.8 KSRRB M1200-6.1. Plain / Reinforced Cement Concrete, in Well Foundation cum
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe ii) PCC with OPC cement design mix M25 @ 340kgs, with
40mm and down size graded granite metal coarse aggregates @0.7cum and
fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case - I : Using Concrete MixerMORTH Specification
No.1200,1500 & 1700
26.9 cum
KSRRB M1200-6.2. Plain / Reinforced Cement Concrete, in Well Foundation
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe ii)PCC with OPC cement design mix M25 @ 340kgs, with
40mm and down size graded granite metal coarse aggregates @0.7cum and
fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008 Case - II : Using Batching Plant, Transit Mixer and
Crane / Concrete Pump MORTH Specification No.1200,1500 & 1700

26.1 KSRRB M1200-7.1. Plain / Reinforced Cement Concrete, in Well Foundation cum
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe. iii) PCC with OPC cement design mix M30 @ 360kgs, with
20mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case - I : Using Concrete MixerMORTH Specification
No.1200,1500 & 1700
26.11 cum
KSRRB M1200-7.2. Plain / Reinforced Cement Concrete, in Well Foundation
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe. :PCC with OPC cement design mix M30 @ 360kgs, with
40mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008 Case - II : Using Batching Plant, Transit Mixer and
Crane / Concrete PumpMORTH Specification No.1200,1500 & 1700

26.12 KSRRB M1200-8.1. Plain / Reinforced Cement Concrete, in Well Foundation cum
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe. iv) PCC with OPC cement design mix M35 @ 390kgs, with
40mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008. Case - I : Using Concrete MixerMORTH Specification
No.1200,1500 & 1700
26.13 cum
KSRRB M1200-8.2. Plain / Reinforced Cement Concrete, in Well Foundation
complete as per Drawing and Technical Specification Concrete to be placed
using tremie pipe :PCC with OPC cement design mix M35 @ 390kgs, with
40mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008 Case - II : Using Batching Plant, Transit Mixer and
Crane / Concrete PumpMORTH Specification No.1200,1500 & 1700

26.14 KSRRB M1200-9.1. (i) PCC with OPC cement design mix M20 @ 320kgs, with cum
40mm and down size graded granite metal coarse aggregates @0.69cum and
fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-
1999 Reaffirmed-2008 Same as in bottom plug concrete, excluding cost of
forming sump, protective bunds, chiselling etc.MORTH Specification
No.1200,1500 & 1700
26.15.1 D. Intermediate Plug - Plain / Reinforced Cement Concrete, in Well Foundation cum
MORTH Specification No.1200,1500 & 1700 - KSRRB M1200-9.2. (ii) PCC
with OPC cement design mix M25 @ 340kgs, with 40mm and down size
graded granite metal coarse aggregates @0.7cum and fine aggregates @
0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008
26.15.2 D. Intermediate Plug - Plain / Reinforced Cement Concrete, in Well Foundation cum
MORTH Specification No.1200,1500 & 1700 - KSRRB M1200-9.3. (iii) PCC
with OPC cement design mix M30 @ 360kgs, with 40mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregates @
0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008
26.16 E.Top Plug KSRRB M1200-10.1. (i) i) PCC design mix M15 with OPC cement cum
@ 240kgs, with 40mm and down size graded granite metal coarse aggregates
@0.63cum and fine aggregates @ 0.42cum MORTH Specification
No.1200,1500 & 1700
26.17 cum
KSRRB M1200-10.2. (ii) PCC with OPC cement design mix M20 @ 320kgs,
with 20mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to
IS9103-1999 Reaffirmed-2008 MORTH Specification No.1200,1500 & 1700

26.18 cum
KSRRB M1200-10.3. (iii) PCC with OPC cement design mix M25 @ 340kgs,
with 40mm and down size graded granite metal coarse aggregates @0.7cum
and fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to
IS9103-1999 Reaffirmed-2008 Same as item 2100-11.5. excluding formwork
MORTH Specification No.1200,1500 & 1700
Basic Rate
141,090.00

798,382.00

6,155.00

89,230.00

6,721.00

6,923.00

7,218.00

5,197.00

5,777.00

6,180.00

6,274.00

6,365.00
6,376.00

6,465.00

6,636.00

6,111.00

5,646.00

5,060.00

6,121.00

5,407.00

6,784.00
5,501.00

7,000.00

5,663.00

5,523.00

5,845.00

6,784.00

4,724.00

5,402.00

5,725.00
Item No. Description Unit
27.1 KSRRB M2100- Excavation in Ordinary Soil KSRRB M2100-1.1. Earth work in cum
excavation for foundation of structures as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
and backfilling with approved material complete as per specifications I.
Ordinary soil - A . Manual Means (i) Depth upto 3m MORTH Specification No.
304

27.2 KSRRB M2100-1.2.Excavation in Ordinary Soil KSRRB M2100-1.1. Earth work cum
in excavation for foundation of structures as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
and backfilling with approved material complete as per specifications I.
Ordinary soil - A . Manual Means .ii) 3 m to 6 m depth MORTH Specification
No. 304

27.3 KSRRB M2100-1.3.Excavation in Ordinary Soil KSRRB M2100-1.1. Earth work cum
in excavation for foundation of structures as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
and backfilling with approved material complete as per specifications I.
Ordinary soil - A . Manual Means (iii ) Above 6 m depth MORTH Specification
No. 304

27.4 “KSRRB M2100-2.1. Earth work in excavation for foundation of structures as cum
perdrawing and technical specifications, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
of sides and bottom and backfilling with approved material complete as per
specifications. B. Mechanical Means (i ) Depth upto 3 m” MORTH Specification
No. 304

27.5 “KSRRB M2100-2.2.Earth work in excavation for foundation of structures as cum

perdrawing and technical specifications, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
of sides and bottom and backfilling with approved material complete as per
specifications. B. Mechanical Means (ii ) Depth 3 m to 6 m” MORTH
Specification No. 304

27.6 “KSRRB M2100-2.3.Earth work in excavation for foundation of structures as cum

perdrawing and technical specifications, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
of sides and bottom and backfilling with approved material complete as per
specifications. B. Mechanical Means (i ) Depth upto 3 m” MORTH Specification
No. 304 B.Mechanical Means (iii ) Depth above 6 m MORTH Specification No.
304

27.7.1 "KSRRB M2100-3.1. Earth work excavation in all kinds of ordinary rock I soft cum
rock not requiring blasting for foundation of bridges and allied works as per
drawing and technical specifications, including setting out, providing shoring
and bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom and filling back with approved material including cost of all
materials, labour, HOM complete as per specifications. MORTH Specification
No. 304 (i) 0 m to 3 m depth by manual means

27.7.2 "KSRRB M2100-3.1. Earth work excavation in all kinds of ordinary rock I soft cum
rock not requiring blasting for foundation of bridges and allied works as per
drawing and technical specifications, including setting out, providing shoring
and bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom and filling back with approved material including cost of all
materials, labour, HOM complete as per specifications. MORTH Specification
No. 304 (ii) 3 m to 6 m depth by manual means
27.7.3 "KSRRB M2100-3.1. Earth work excavation in all kinds of ordinary rock I soft cum
rock not requiring blasting for foundation of bridges and allied works as per
drawing and technical specifications, including setting out, providing shoring
and bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom and filling back with approved material including cost of all
materials, labour, HOM complete as per specifications. MORTH Specification
No. 304 (iii) Above 6 m depth by manual means

27.7.4 "KSRRB M2100-3.2. Earth work excavation in all kinds of ordinary rock I soft cum
rock not requiring blasting for foundation of bridges and allied works as per
drawing and technical specifications, including setting out, providing shoring
and bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom and filling back with approved material including cost of all
materials, labour, HOM complete as per specifications. MORTH Specification
No. 304 (iv) 0 m to 3m depth by Mechanical means

27.7.5 "KSRRB M2100-3.2. Earth work excavation in all kinds of ordinary rock I soft cum
rock not requiring blasting for foundation of bridges and allied works as per
drawing and technical specifications, including setting out, providing shoring
and bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom and filling back with approved material including cost of all
materials, labour, HOM complete as per specifications. MORTH Specification
No. 304 (v) 3 m to 6 m depth by Mechanical means

27.7.6 "KSRRB M2100-3.2. Earth work excavation in all kinds of ordinary rock I soft cum
rock not requiring blasting for foundation of bridges and allied works as per
drawing and technical specifications, including setting out, providing shoring
and bracing, removal of stumps and other deleterious matter, dressing of sides
and bottom and filling back with approved material including cost of all
materials, labour, HOM complete as per specifications. MORTH Specification
No. 304 (vi) Above 6 m depth by Mechanical means

27.9.1 "KSRRB M2100-4.1. Earth work excavation in hard rock with blasting for cum
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, providing shoring and bracing, removal of
stumps and other deleterious matter, dressing of sides and bottom and filling
back with approved material including cost of all materials, labour, HOM
complete as per specifications. MORTH Specification No. 304 (i) 0 m to 3 m
depth by manual means

27.9.2 "KSRRB M2100-4.1. Earth work excavation in hard rock with blasting for cum
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, providing shoring and bracing, removal of
stumps and other deleterious matter, dressing of sides and bottom and filling
back with approved material including cost of all materials, labour, HOM
complete as per specifications. MORTH Specification No. 304 (ii) 3 m to 6 m
depth by manual means

27.9.3 "KSRRB M2100-4.1. Earth work excavation in hard rock with blasting for cum
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, providing shoring and bracing, removal of
stumps and other deleterious matter, dressing of sides and bottom and filling
back with approved material including cost of all materials, labour, HOM
complete as per specifications. MORTH Specification No. 304 (iii) Above 6 m
depth by manual means
27.10.1 "KSRRB M2100-4.2. Earth work excavation in hard rock without blasting for cum
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
and filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 i) 0 m to 3
m depth by mechanical means

27.10.2 "KSRRB M2100-4.2. Earth work excavation in hard rock without blasting for cum
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
and filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 ii) 3m to 6
m depth by mechanical means

27.10.3 "KSRRB M2100-4.2. Earth work excavation in hard rock without blasting for cum
foundation of bridges and allied works as per drawing and technical
specifications, including setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter, dressing of sides and bottom
and filling back with approved material including cost of all materials, labour,
HOM complete as per specifications. MORTH Specification No. 304 iii) Above
6 m depth by mechanical means

27.11 KSRRB M2100 Excavation in Marshy soil KSRRB 2100-5. Excavation in cum
marshy soil upto 3m depth for foundations of structures as per drawing and
technical specifications including removing the excavated stuff to a lead of
15m., including dewatering , shoring and shuttering, refilling trenches in
250mm layers, wherever necessary watering and ramming, including cost of all
materials, labour complete as per specifications. MORTH Chapter 12

27.12 KSRRB M2100-5.1. Earth work in excavation for foundation of structures as cum
per drawing and technical specifications, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
of sides and bottom and backfilling with approved material complete as per
specifications. “V. Marshy soil - A. Manual Means Upto 3 m depth MORTH
Specification No. 304

27.13 “KSRRB M2100-5.2. Earth work in excavation for foundation of structures as cum
per drawing and technical specifications, including setting out, construction of
shoring and bracing, removal of stumps and other deleterious matter, dressing
of sides and bottom and backfilling with approved material complete as per
specifications. “V. Marshy soil - B. Mechanical Means MORTH Specification
No. 304

27.14 KSRRB M2100 Filling the foundations KSRRB 2100-6. Filling the foundations cum
trenches using approved sand as per drawing and technical specifications in
250mm layers, wherever necessary watering and ramming, including cost of all
materials, labour complete as per specifications. MORTH Chapter 12

27.15 KSRRB M2100 Back Filling of abutments using wing wall & Returns KSRRB cum
M2100-7. Earth work in excavation for foundation of structures as per drawing
and technical specifications, including setting out, construction of shoring and
bracing, removal of stumps and other deleterious matter, dressing of sides and
bottom and backfilling with approved material complete as per specifications.
VI. Backfilling in Marshy Foundation Pits.” MORTH Specification No. 304

27.16 KSRRB M2100-8. Filling Annular Space Around Footing in Rock Lean cement cum
concrete M 10 mix.
27.18 KSRRB M2100 PCC 1 KSRRB M2100-10. Plain cement concrete M10 with cum
OPC cement @ 220kgs, with crushed 40mm and down size graded granite
metal coarse aggregates @0.84cum and fine aggregates @ 0.56cum, in
foundation mechanically mixed, placed in foundation and compacted by
vibration including curing for 14 days complete as per specifications MORTH
Specification No. 2100

27.22 "KSRRB M2100-12.1. Stone Masonry Work in Cement Mortar 1:3 in cum
Foundation complete as per Drawing and Technical Specifications A. Square
Rubble Coursed Rubbie Masonry (first sort)”MORTH Specification No. 1405.4

27.23 KSRRB M2100-12.2. Stone Masonry Work in Cement Mortar 1:3 in Foundation cum
complete as per Drawing and Technical Specifications. B. Random Rubble
Masonry( coursed / uncoursed) MORTH Specification No. 1405.4

27.24 KSRRB M2100-13. Plain / Reinforced Cement Concrete M15 with OPC cum
cement @ 240kgs, with 40mm and down size graded granite metal coarse
aggregates @0.84cum and fine aggregates @ 0.56cum in Open Foundation
complete as per Drawing and Technical Specifications MORTH Specification
No. 1500,1700 & 2100
27.25 "KSRRB M2100-14. Plain /Reinforcement Cement Concrete M20 with OPC cum
cement @ 300kgs, with 40mm and down size graded granite metal coarse
aggregates @0.64cum and fine aggregates @ 0.43cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, in Open Foundation
complete as per Drawing and Technical Specifications "MORTH Specification
No. 1500,1700 & 2100

27.27 "KSRRB M2100-15.2. Plain /Reinforcement Cement Concrete M20 with OPC cum
cement @ 320kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008, in Open Foundation
complete as per Drawing and Technical Specifications Case - II : With Batching
Plant, Transit Mixer and Concrete Pump MORTH Specification No. 1500,1700
& 2100

27.29 KSRRB M2100-16.2. Plain / Reinforced Cement Concrete idesign mix M25 cum
with OPC cement @ 340kgs, with 40mm and down size graded granite metal
coarse aggregates @0.70cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,Open
Foundation complete as per Drawing and Technical Specifications Case - II
With Batching Plant, Transit Mixer and Concrete PumpMORTH Specification
No.1500,1700 & 2100

27.31 KSRRB M2100-17.2. Plain / Reinforced Cement Concrete idesign mix M25 cum
with OPC cement @ 340kgs, with 20mm and down size graded granite metal
coarse aggregates @0.70cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008,Open
Foundation complete as per Drawing and Technical Specification Case - II :
With Batching Plant, Transit Mixer and Concrete Pump MORTH Specification
No. 1500,1700 & 2100

27.33 KSRRB M2100-18.2. Plain / Reinforced Cement Concrete in Open Foundation cum
with OPC cement design mix M30 @ 360kgs, with 20mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregates @
0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 complete as per Drawing and Technical Specifications Case - II : With
Batching Plant, Transit Mixer and Concrete Pump MORTH Specification No.
1500,1700 & 2100
27.35 KSRRB M2100-19.2. Plain / Reinforced Cement Concrete in Open Foundation cum
with OPC cement design mix M30 @ 360kgs, with 20mm and down size
graded granite metal coarse aggregates @0.69cum and fine aggregates @
0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 complete as per Drawing and Technical Specifications Case - II : With
Batching Plant, Transit Mixer and Concrete Pump MORTH Specification No.
1500,1700 & 2100

27.37 KSRRB M2100-20.2. Plain / Reinforced Cement Concrete in Open Foundation cum
with OPC cement design mix M35 @ 390kgs, with 20mm and down size
graded granite metal coarse aggregates @0.68cum and fine aggregates @
0.45cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008. case II : With Batching Plant, Transit Mixer and Concrete Pump MORTH
Specification No. 1500,1700 & 2100
Basic Rate
195.00

251.00

335.00

50.00

57.00

73.00

279.00

332.00
413.00

60.00

69.00

82.00

586.00

639.00

719.00
 471.00

551.00

631.00

902.00

614.00

145.00

3,208.00

349.00

5,197.00
5,345.00

4,414.00

4,297.00

5,458.00

5,610.00

5,288.00

5,349.00

5,434.00

5,435.00
5,519.00

5,652.00
Item No. Description Unit
28.7.1 KSRRB M2200-5.1 Providing and laying cement concrete of mix 1:2:4 with cum
OPC @ 240kgs, with 40mm and down size graded granite metal coarse
aggregates @0.63cum and fine aggregates @ 0.42cum including cost of
materials, labour, HOM curing, form works, scaffolding and centering complete
as per MORTH Section : 2200 & IS 456 a) upto 5mtr height
28.7.1.1 Providing and laying cement concrete 1:2:4 with OPC @ 240kgs, with 40mm cum
and down size graded granite metal coarse aggregates @0.63cum and fine
aggregates@ 0.42cum above 5mtr height
28.7.2 KSRRB M2200-5.2. Providing and laying Design mix M20 with OPC @ cum
320kgs, with 40mm and down size graded granite metal coarse aggregates
@0.64cum and fine aggregates @ 0.43cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008, including cost of materials,
labour, HOM curing, form works, scaffolding and centering complete as per
specifications. b) upto 5 m height

28.7.2.1 Providing and laying PCC grade design mix M20with OPC @320kgs, with cum
40mm and down size graded granite metal coarse aggregates @0.64cum and
fine aggregates@ 0.43cum, with superplastisiser @31ts confirming to IS9103-
1999 Reaffirmed-2008, including cost of materials, labour, HOM curing, form
works, scaffolding and centering complete as per specifications. above 5mtr
height

28.7.3 KSRRB M2200-5.3. Providing and laying Design mix M25 With OPC @ cum
340kgs, with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. c) - i) Upto 5 m height

28.7.4 KSRRB M2200-5.4. Providing and laying Design mix M25 @ with OPC cum
340kgs, with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - ii) For height above 5 m and upto 10m.

28.7.5 KSRRB M2200-5.5. Providing and laying Design mix M25 with OPC @ cum
340kgs, with 40mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. -iii) For height above 10m.

28.7.6 K8RRB M2200-5.6. Providing and laying Design mix M30 with OPC @ 360kgs, cum
with 40mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
189103-1999 Reaffirmed-2008 including cost of materials, labour, HOM curing,
form works, scaffolding and centering complete as per specifications. - i) upto
5 m height

28.7.7 K8RRB M2200-5.7. Providing and laying Design mix M30 with OPC @ 360kgs, cum
with 40mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
189103-1999 Reaffirmed-2008 including cost of materials, labour, HOM curing,
form works, scaffolding and centering complete as per specifications. ii) For
height above 5 m and upto 10m.
28.7.8 K8RRB M2200-5.8. Providing and laying Design mix M30 with OPC @ 360kgs, cum
with 40mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
189103-1999 Reaffirmed-2008 including cost of materials, labour, HOM curing,
form works, scaffolding and centering complete as per specifications. - iii) For
height above 10 m.

28.7.9 K8RRB M2200-5.9. Providing and laying Design mix M20 with OPC @ 320kgs, cum
with 20mm and down size graded granite metal coarse aggregates @0.69cum
and fine aggregates @ 0.46cum, with superplastisiser @31ts confirming to
189103-1999 Reaffirmed-2008 including cost of materials, labour, HOM curing,
form works, scaffolding and centering complete as per specifications. - i) Upto
5 m height.

28.7.10 K8RRB M2200-5.10. Providing and laying Design mix M20 with OPC @ cum
320kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - ii) For height, 5m to 10m

28.7.11 K8RRB M2200-5.11. Providing and laying Design mix M20 with OPC @ cum
320kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height above 10m.

28.7.12 K8RRB M2200-5.12. Providing and laying Design mix M25 with OPC @ cum
340kgs, with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 - i) Upto 5m height

28.7.13 K8RRB M2200-5.13. Providing and laying Design mix M25 with OPC @ cum
340kgs, with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - ii)For height, 5m to 10m

28.7.14 K8RRB M2200-5.14. Providing and laying Design mix M25 with OPC @ cum
340kgs, with 20mm and down size graded granite metal coarse aggregates
@0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height, above 10m,

28.7.15 K8RRB M2200-5.15. Providing and laying Design mix M30 with OPC @ cum
360kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - i) Upto 5m height,

28.7.16 K8RRB M2200-5.16. Design mix M30 with OPC@ 360kgs, with 20mm and cum
down size graded granite metal coarse aggregates @0.69cum and fine
aggregates @ 0.46cum, with superplastisiser @31ts confirming to 189103-
1999 Reaffirmed-2008 ii) For height, 5m to 10m
28.7.17 K8RRB M2200-5.17. Providing and laying Design mix M30 with OPC @ cum
360kgs, with 20mm and down size graded granite metal coarse aggregates
@0.69cum and fine aggregates @ 0.46cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. iii) For height, above 10m
28.7.18 K8RRB M2200-5.18. Providing and laying Design mix M35 with OPC @ cum
390kgs, with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - i) U pto 5m height

28.7.19 K8RRB M2200-5.19. Providing and laying Design mix M35 with OPC @ cum
390kgs, with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - ii) For height 5m to 10m

28.7.20 KSRRB M2200-5.20. Providing and laying Design mix M35 with OPC @ cum
390kgs, with 20mm and down size graded granite metal coarse aggregates
@0.68cum and fine aggregates @ 0.45cum, with superplastisiser @31ts
confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, labour,
HOM curing, form works, scaffolding and centering complete as per
specifications. - iii) For height above 10m,

28.8.2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work Tonne
including straightening, cutting, bending, hooking, placing in position, lapping
and/or welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per disign (laps, hooks
and wastage shall not be measured and paid) cost of materials, labour, HOM
complete as per specification. MORTH Specification No.1600 & 2200 TMT
Bars Fe 500

28.8.3 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work Tonne
including straightening, cutting, bending, hooking, placing in position, lapping
and/or welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per disign (laps, hooks
and wastage shall not be measured and paid) cost of materials, labour, HOM
complete as per specification. MORTH Specification No.1600 & 2200 TMT
Bars Fe 550

28.10 KSRRB M2200- Providing Weep Holes KSRRB M2200-8. Providing weep Nos/mtr
holes in Brick masonry I Plain I Reinforced concrete abutment, wing wall I
return wall with 100 mm dia AC pipe, extending through the full width of the
structure with slope of 1V :20H towards drawing force. Complete as per
drawing and Technical Specifications including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No.2706 & 2200

28.11 KSRRB M2200-8.1. Back filling behind abutment, wing wall and return wall cum
complete as per drawing and Technical Specification including cost of
materials, labour, HOM of machineries, complete as per specifications. A.
Granular material MORTH Specification No. 2204 & 304
28.13 KSRRB M2200- Filter Media KSRRB M2200-9. Providing and laying of Filter cum
media with granular materials /stone crushed aggregates satisfying the
requirements laid down in clause 2504.2.2. of MORTH specifications to a
thickness of not less than 600 mm with smaller size towards the soil and bigger
size towards the wall and provided over the entire surface behind abutment,
wing wall and return wall to the full height compacted to a firm condition
complete as per drawing and Technical Specification including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2504.2.2
28.14 KSRRB M2200- Bearings KSRRB M2200-10. Supplying, fitting and fixing in Each
position true to line and level cast steel rocker bearing conforming to IRC: 83 Tonne
(Pt.-1) section IX and clause 2000.3 of MORTH specifications complete bearing
including all accessories as per drawing and Technical Specifications including capacity
cost of materials, labour, HOM complete as per specifications. MORTH
Specification No.1000, 2000 & 2200

28.15 KSRRB M2200- Bearings KSRRB M2200-11. Supplying, fitting and fixing in Each
position true to line and level forged steel roller bearing conforming to IRC: Tonne
83(pt.-1) section IX and clause 2000.3 of MORTH specifications complete bearing
including all accessories as per drawing and Technical Specifications including capacity
cost of materials, labour, HOM complete as per specifications. MORTH
Specification No.1000, 2000 & 2200

28.16 KSRRB M2200- Bearings KSRRB M2200-12. Supplying, fitting and fixing in Tonne
position true to line and level sliding plate bearing with PTFE surface sliding on
stainless steel complete including all accessories as per drawing and Technical
Specifications and BS 5400, section 9.1 & 9.2 (for PTFE) and clause 2000.4 of
MORTH Specifications including cost of materials, labour, HOM complete as
per specifications. MORTH Specification No.2000 & 2200

28.17 KSRRB M2200- Bearings KSRRB M2200-13. Supplying, fitting and fixing in C.C.
position true to line and level elastomeric bearing conforming to IRC: 83 (Part-
II) section IX and clause 2000.5 of MORTH specifications complete including
all accessories as per drawing and Technical Specifications including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2000 & 2200

28.18 KSRRB M2200- Bearings KSRRB M2200-14. Supplying, fitting and fixing in Tonne
position true to line and level sliding plate bearing with stainless steel plate
sliding on stainless steel plate with mild steel matrix complete including all
accessories as per drawing and Technical Specifications including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No.2000 & 2200

28.19 KSRRB M2200- Bearings KSRRB M2200-15. Supplying, fitting and fixing in Tonne
position true to line and level POT-PTFE bearing consisting of a metal piston
supported by a disc or unreinforced elastomer confined within a metal cylinder,
sealing rings, dust seals, PTFE surface sliding against stainless steel mating
surface, complete assembly to be of cast steel/fabricated structural steel, metal
and elastomer elements to be as per IRC 83 part-1 & II respectively and other
parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2000.6 of MORTH
Specifications complete as per drawing and approved Technical Specifications
including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No.2000 & 2200
Basic Rate
5,799.00

5,963.00

5,960.00

6,176.00

5,698.00

6,438.00

6,809.00

5,789.00

6,541.00
6,917.00

5,633.00

6,365.00

6,731.00

5,788.00

6,540.00

6,916.00

5,879.00

6,643.00

7,025.00
 6,020.00

6,802.00

7,193.00

67,543.00

68,225.00

157.00

861.00

2,091.00
 359.00

20.00

1,123.00

0.60

1,121.00

363.00
Item No. Description Unit
29.1.1 Solid slab super structure KSRRB M2300-1.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. A. RCC - with OPC
cement design mix M20 @ 320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m

29.1.2 Solid slab super structure KSRRB M2300-1.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. A. RCC - with OPC
cement design mix M20 @ 320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m

29.1.3 Solid slab super structure KSRRB M2300-1.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. A. RCC - with OPC
cement design mix M20 @ 320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10
m to 15 m

29.1.4 Solid slab super structure KSRRB M2300-1.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. A. RCC - with OPC
cement design mix M20 @ 320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15
m to 20 m

29.1.5 Solid slab super structure KSRRB M2300-1.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. A. RCC - with OPC
cement design mix M20 @ 320kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.2.1 T - Beams & slabs KSRRB M2300-1.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification - complete as per specifications. A. RCC with OPC cement
design mix M20 @ 320kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m

29.2.2 T - Beams & slabs KSRRB M2300-1.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification - complete as per specifications. A. RCC with OPC cement
design mix M20 @ 320kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m
29.2.3 T - Beams & slabs KSRRB M2300-1.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification - complete as per specifications. A. RCC with OPC cement
design mix M20 @ 320kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10
m to 15 m

29.2.4 T - Beams & slabs KSRRB M2300-1.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification - complete as per specifications. A. RCC with OPC cement
design mix M20 @ 320kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15
m to 20 m

29.2.5 T - Beams & slabs KSRRB M2300-1.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification - complete as per specifications. A. RCC with OPC cement
design mix M20 @ 320kgs, with 20mm and down size graded granite metal
coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008. Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.5.1 Solid slab super structure KSRRB M2300-3.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. B. RCC with OPC
cement design mix M25 @ 340kgs, with 20mm and down size graded granite
metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m -

29.5.2 Solid slab super structure KSRRB M2300-3.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. B. RCC with OPC
cement design mix M25 @ 340kgs, with 20mm and down size graded granite
metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m -

29.5.3 Solid slab super structure KSRRB M2300-3.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. B. RCC with OPC
cement design mix M25 @ 340kgs, with 20mm and down size graded granite
metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10
m to 15 m

29.5.4 Solid slab super structure KSRRB M2300-3.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. B. RCC with OPC
cement design mix M25 @ 340kgs, with 20mm and down size graded granite
metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15
m to 20 m
29.5.5 Solid slab super structure KSRRB M2300-3.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. B. RCC with OPC
cement design mix M25 @ 340kgs, with 20mm and down size graded granite
metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.6.1 T - Beams & slabs KSRRB M2300-3.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. B. RCC with OPC cement design
mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse
aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height upto 5 m

29.6.2 T - Beams & slabs KSRRB M2300-3.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. B. RCC with OPC cement design
mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse
aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5 m to 10 m

29.6.3 T - Beams & slabs KSRRB M2300-3.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. B. RCC with OPC cement design
mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse
aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10 m to 15 m

29.6.4 T - Beams & slabs KSRRB M2300-3.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. B. RCC with OPC cement design
mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse
aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15 m to 20 m

29.6.5 T - Beams & slabs KSRRB M2300-3.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. B. RCC with OPC cement design
mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse
aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height above 20 m

29.9.1 Solid slab super structure KSRRB M2300-5.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. C. RCC with OPC
cement design mix M30 @ 360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m
29.9.2 Solid slab super structure KSRRB M2300-5.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. C. RCC with OPC
cement design mix M30 @ 360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m

29.9.3 Solid slab super structure KSRRB M2300-5.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. C. RCC with OPC
cement design mix M30 @ 360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10
m to 15 m

29.9.4 Solid slab super structure KSRRB M2300-5.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. C. RCC with OPC
cement design mix M30 @ 360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15
m to 20 m

29.9.5 Solid slab super structure KSRRB M2300-5.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. C. RCC with OPC
cement design mix M30 @ 360kgs, with 20mm and down size graded granite
metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.10.1 T - Beams & slabs KSRRB M2300-5.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. C. RCC with OPC cement design
mix M30 @ 360kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height upto 5 m

29.10.2 T - Beams & slabs KSRRB M2300-5.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. C. RCC with OPC cement design
mix M30 @ 360kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5 m to 10 m

29.10.3 T - Beams & slabs KSRRB M2300-5.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. C. RCC with OPC cement design
mix M30 @ 360kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10 m to 15 m
29.10.4 T - Beams & slabs KSRRB M2300-5.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. C. RCC with OPC cement design
mix M30 @ 360kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15 m to 20 m

29.10.5 T - Beams & slabs KSRRB M2300-5.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. C. RCC with OPC cement design
mix M30 @ 360kgs, with 20mm and down size graded granite metal coarse
aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height above 20 m

29.13.1 Solid slab super structure KSRRB M2300-7.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height upto 5 m -

29.13.2 Solid slab super structure KSRRB M2300-7.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height 5 m to 10 m

29.13.3 Solid slab super structure KSRRB M2300-7.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height 10 m to 15 m

29.13.4 Solid slab super structure KSRRB M2300-7.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height 15 m to 20 m

29.13.5 Solid slab super structure KSRRB M2300-7.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height above 20 m
29.14.1 T - Beams & slabs KSRRB M2300-7.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. D. RCC / PSC with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m -

29.14.2 T - Beams & slabs KSRRB M2300-7.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. D. RCC / PSC with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m

29.14.3 T - Beams & slabs KSRRB M2300-7.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. D. RCC / PSC with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10
m to 15 m

29.14.4 T - Beams & slabs KSRRB M2300-7.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. D. RCC / PSC with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15
m to 20 m

29.14.5 T - Beams & slabs KSRRB M2300-7.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. D. RCC / PSC with OPC cement
design mix M35 @ 390kgs, with 20mm and down size graded granite metal
coarse aggregates @0.68cum and fine aggregates @ 0.45cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.15.1 Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height upto 5 m

29.15.2 Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height 5 m to 10 m
29.15.3 Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height 10 m to 15 m

29.15.4 Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height 15 m to 20 m

29.15.5 Box girder & Balanced cantilever KSRRB M2300-7.3. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. D. RCC / PSC with
OPC cement design mix M35 @ 390kgs, with 20mm and down size graded
granite metal coarse aggregates @0.68cum and fine aggregates @ 0.45cum,
with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, Case
- I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 -
Height above 20 m

29.19.1 Solid slab super structure KSRRB M2300-9.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. E. PSC with OPC
cement design mix M40 @ 420kgs, with 20mm and down size graded granite
metal coarse aggregates @0.67cum and fine aggregates @ 0.44cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m -

29.19.2 Solid slab super structure KSRRB M2300-9.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. E. PSC with OPC
cement design mix M40 @ 420kgs, with 20mm and down size graded granite
metal coarse aggregates @0.67cum and fine aggregates @ 0.44cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m

29.19.3 Solid slab super structure KSRRB M2300-9.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. E. PSC with OPC
cement design mix M40 @ 420kgs, with 20mm and down size graded granite
metal coarse aggregates @0.67cum and fine aggregates @ 0.44cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10
m to 15 m

29.19.4 Solid slab super structure KSRRB M2300-9.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. E. PSC with OPC
cement design mix M40 @ 420kgs, with 20mm and down size graded granite
metal coarse aggregates @0.67cum and fine aggregates @ 0.44cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15
m to 20 m
29.19.5 Solid slab super structure KSRRB M2300-9.1. Furnishing and Placing cum
Reinforced / Prestressed cement concrete in super-structure as per drawing
and Technical Specification complete as per specifications. E. PSC with OPC
cement design mix M40 @ 420kgs, with 20mm and down size graded granite
metal coarse aggregates @0.67cum and fine aggregates @ 0.44cum, with
superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I :
Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.20.1 T - Beams & slabs KSRRB M2300-9.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. E. PSC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height upto 5 m -

29.20.2 T - Beams & slabs KSRRB M2300-9.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. E. PSC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 5 m to 10 m

29.20.3 T - Beams & slabs KSRRB M2300-9.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. E. PSC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 10 m to 15 m

29.20.4 T - Beams & slabs KSRRB M2300-9.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. E. PSC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height 15 m to 20 m

29.20.5 T - Beams & slabs KSRRB M2300-9.2. Furnishing and Placing Reinforced / cum
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. E. PSC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete
Mixer MORTH Specification No. 1500,1600 & 1700 - Height above 20 m
29.22.1 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-10.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. RCC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching
Plant, Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 &
1700 - Height upto 5 m

29.22.2 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-10.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. RCC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching
Plant, Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 &
1700 - Height 5 m to 10 m

29.22.3 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-10.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. RCC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching
Plant, Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 &
1700 - Height 10 m to 15 m

29.22.4 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-10.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. RCC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching
Plant, Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 &
1700 - Height 15 m to 20 m

29.22.5 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-10.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. RCC with OPC cement design
mix M40 @ 420kgs, with 20mm and down size graded granite metal coarse
aggregates @0.67cum and fine aggregates @ 0.44cum, with superplastisiser
@3lts confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching
Plant, Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 &
1700 - Height above 20 m
29.23.1 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-10.3. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. RCC with OPC cement design mix M40 @
420kgs, with 20mm and down size graded granite metal coarse aggregates
@0.67cum and fine aggregates @ 0.44cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching Plant,
Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 & 1700 -
Height upto 5 m

29.23.2 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-10.3. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. RCC with OPC cement design mix M40 @
420kgs, with 20mm and down size graded granite metal coarse aggregates
@0.67cum and fine aggregates @ 0.44cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching Plant,
Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 & 1700 -
Height 5 m to 10 m -

29.23.3 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-10.3. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. RCC with OPC cement design mix M40 @
420kgs, with 20mm and down size graded granite metal coarse aggregates
@0.67cum and fine aggregates @ 0.44cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching Plant,
Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 & 1700 -
Height 10 m to 15 m

29.23.4 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-10.3. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. RCC with OPC cement design mix M40 @
420kgs, with 20mm and down size graded granite metal coarse aggregates
@0.67cum and fine aggregates @ 0.44cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching Plant,
Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 & 1700 -
Height 15 m to 20 m

29.23.5 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-10.3. Furnishing and Placing Reinforced / Prestressed cement
concrete in super-structure as per drawing and Technical Specification
complete as per specifications. RCC with OPC cement design mix M40 @
420kgs, with 20mm and down size graded granite metal coarse aggregates
@0.67cum and fine aggregates @ 0.44cum, with superplastisiser @3lts
confirming to IS9103-1999 Reaffirmed-2008 Case - II : Using Batching Plant,
Transit Mixer & Concrete Pump MORTH Specification No. 1500,1600 & 1700 -
Height above 20 m

29.24.1 Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and cum
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
graded granite metal coarse aggregates @0.67cum and fine aggregates @
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height upto 5 m -
29.24.2 Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and cum
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
graded granite metal coarse aggregates @0.67cum and fine aggregates @
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height 5 m to 10 m

29.24.3 Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and cum
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
graded granite metal coarse aggregates @0.67cum and fine aggregates @
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height 10 m to 15 m

29.24.4 Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and cum
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
graded granite metal coarse aggregates @0.67cum and fine aggregates @
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height 15 m to 20 m

29.24.5 Solid slab / voided slab super -structure KSRRB M2300-11.1. Furnishing and cum
Placing Reinforced / Prestressed cement concrete in super-structure as per
drawing and Technical Specification complete as per specifications. F. PSC
with OPC cement design mix M40 @ 420kgs, with 20mm and down size
graded granite metal coarse aggregates @0.67cum and fine aggregates @
0.44cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-
2008 MORTH Specification No. 1500,1600 & 1700 - Height above 20 m

29.25.1 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-11.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. F. PSC with OPC cement design
mix M45 @ 440kgs, with 20mm and down size graded granite metal coarse
aggregates @0.66cum and fine aggregates @ 0.44 cum, with superplastisiser
@4lts confirming to IS9103-1999 Reaffirmed- 2008 MORTH Specification No.
1500,1600 & 1700 - Height upto 5 m

29.25.2 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-11.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. F. PSC with OPC cement design
mix M45 @ 440kgs, with 20mm and down size graded granite metal coarse
aggregates @0.66cum and fine aggregates @ 0.44 cum, with superplastisiser
@4lts confirming to IS9103-1999 Reaffirmed- 2008 MORTH Specification No.
1500,1600 & 1700 - Height 5 m to 10 m

29.25.3 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-11.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. F. PSC with OPC cement design
mix M45 @ 440kgs, with 20mm and down size graded granite metal coarse
aggregates @0.66cum and fine aggregates @ 0.44 cum, with superplastisiser
@4lts confirming to IS9103-1999 Reaffirmed- 2008 MORTH Specification No.
1500,1600 & 1700 - Height 10 m to 15 m
29.25.4 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-11.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. F. PSC with OPC cement design
mix M45 @ 440kgs, with 20mm and down size graded granite metal coarse
aggregates @0.66cum and fine aggregates @ 0.44 cum, with superplastisiser
@4lts confirming to IS9103-1999 Reaffirmed- 2008 MORTH Specification No.
1500,1600 & 1700 - Height 15 m to 20 m

29.25.5 T - Beams & slabs including launching of precast girder by launching truss cum
upto 40m span KSRRB M2300-11.2. Furnishing and Placing Reinforced /
Prestressed cement concrete in super-structure as per drawing and Technical
Specification complete as per specifications. F. PSC with OPC cement design
mix M45 @ 440kgs, with 20mm and down size graded granite metal coarse
aggregates @0.66cum and fine aggregates @ 0.44 cum, with superplastisiser
@4lts confirming to IS9103-1999 Reaffirmed- 2008 MORTH Specification No.
1500,1600 & 1700 - Height above 20 m

29.26.1 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-11.3. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. F. PSC with OPC cement design mix M45 @ 440kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m

29.26.2 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-11.3. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. F. PSC with OPC cement design mix M45 @ 440kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
5 m to 10 m

29.26.3 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-11.3. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. F. PSC with OPC cement design mix M45 @ 440kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
10 m to 15 m

29.26.4 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-11.3. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. F. PSC with OPC cement design mix M45 @ 440kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
15 m to 20 m

29.26.5 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-11.3. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. F. PSC with OPC cement design mix M45 @ 440kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m
29.27.1 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-12. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. G. PSC with OPC cement design mix M50 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m -

29.27.2 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-12. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. G. PSC with OPC cement design mix M50 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
5 m to 10 m

29.27.3 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-12. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. G. PSC with OPC cement design mix M50 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
10 m to 15 m

29.27.4 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-12. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. G. PSC with OPC cement design mix M50 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
15 m to 20 m

29.27.5 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-12. Furnishing and Placing Reinforced / Prestressed cement concrete
in super-structure as per drawing and Technical Specification complete as per
specifications. G. PSC with OPC cement design mix M50 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.66cum and
fine aggregates @ 0.44 cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed- 2008 MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.28.1 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-13. Furnishing and Placing Reinforced/ Prestressed cement concrete in
super-structure as per drawing and Technical Specification complete as per
specifications. H. PSC with OPC cement design mix M55 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed-2008 MORTH Specification No. 1500,1600 & 1700 - Height
upto 5 m

29.28.2 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-13. Furnishing and Placing Reinforced/ Prestressed cement concrete in
super-structure as per drawing and Technical Specification complete as per
specifications. H. PSC with OPC cement design mix M55 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed-2008 MORTH Specification No. 1500,1600 & 1700 - Height 5
m to 10 m
29.28.3 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-13. Furnishing and Placing Reinforced/ Prestressed cement concrete in
super-structure as per drawing and Technical Specification complete as per
specifications. H. PSC with OPC cement design mix M55 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed-2008 MORTH Specification No. 1500,1600 & 1700 - Height
10 m to 15 m

29.28.4 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-13. Furnishing and Placing Reinforced/ Prestressed cement concrete in
super-structure as per drawing and Technical Specification complete as per
specifications. H. PSC with OPC cement design mix M55 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed-2008 MORTH Specification No. 1500,1600 & 1700 - Height
15 m to 20 m

29.28.5 Cast-in-situ box girder, segmental construction & balanced cantilever KSRRB cum
M2300-13. Furnishing and Placing Reinforced/ Prestressed cement concrete in
super-structure as per drawing and Technical Specification complete as per
specifications. H. PSC with OPC cement design mix M55 @ 450kgs, with
20mm and down size graded granite metal coarse aggregates @0.68cum and
fine aggregates @ 0.45cum, with superplastisiser @4lts confirming to IS9103-
1999 Reaffirmed-2008 MORTH Specification No. 1500,1600 & 1700 - Height
above 20 m

29.29.2 KSRRB M2300-14. Providing T M. T steel reinforcement for R.C.C. work Tonne
including straightening, cutting, bending, hooking, placing in position, lapping
and/or welding wherever required tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
and wastage shall not be measured and paid) including cost of materials,
labour, HOM complete as per specifications. MORTH Specification No. 1600 &
2200 - TMT Bars Fe 500

29.29.3 KSRRB M2300-14. Providing T M. T steel reinforcement for R.C.C. work Tonne
including straightening, cutting, bending, hooking, placing in position, lapping
and/or welding wherever required tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps, hooks
and wastage shall not be measured and paid) including cost of materials,
labour, HOM complete as per specifications. MORTH Specification No. 1600 &
2200 - TMT Bars Fe 550

29.30 KSRRB M2300 - High tensile wires KSRRB M2300-15. High tensile steel wires Tonne
/ strands including all accessories for stressing, stressing operations and
grouting complete as per drawing and Technical Specifications complete as
per specifications MORTH Specification No. 1800
Basic Rate
6,721.00

6,991.00

7,262.00

7,237.00

7,465.00

6,991.00

7,262.00
7,532.00

7,895.00

8,177.00

6,926.00

7,205.00

7,484.00

7,467.00
7,704.00

7,205.00

7,484.00

7,763.00

8,134.00

8,425.00

7,077.00
7,363.00

7,648.00

8,014.00

8,129.00

7,363.00

7,648.00

7,933.00
8,311.00

8,608.00

7,145.00

7,438.00

7,731.00

8,101.00

8,405.00
7,438.00

7,731.00

8,024.00

8,405.00

8,710.00

8,317.00

8,903.00
 9,489.00

10,232.00

10,842.00

8,058.00

8,156.00

8,436.00

8,717.00
8,997.00

7,591.00

7,848.00

8,106.00

8,822.00

9,138.00
6,779.00

7,042.00

7,304.00

7,692.00

7,970.00
7,566.00

8,090.00

8,614.00

9,364.00

9,921.00

6,412.00
6,675.00

6,937.00

7,199.00

7,461.00

6,886.00

7,154.00

7,421.00
 7,836.00

8,125.00

7,690.00

8,225.00

8,760.00

9,565.00

10,142.00
7,724.00

8,266.00

8,808.00

9,324.00

9,615.00

7,804.00

8,352.00
 8,900.00

9,419.00

9,713.00

69,114.00

69,664.00

170,301.00
Item No. Description Unit
30.1 KSRRB M2500-1.1. Providing and laying boulders apron on river bed for cum
protection against scour with stone boulders weighing not less than 40 kg each
complete as per drawing and Technical specification complete as per
specifications. A. Boulder Laid Dry Without Wire Crates MORTH Specification
No. 2503
30.2 “KSRRB M2500-1.2. Providing and laying of boulder apron laid in wire crates cum
made with 4mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x
100mm mesh (weaved diagonally) including 10% extra for laps and joints laid
with stone boulders weighing not less than 40 kg each complete as per
specifications. B. Boulder Apron Laid in Wire Crates” MORTH Specification No.
2503

30.3 KSRRB M2500-Cement concrete blocks KSRRB M2500-2. Providing and cum
laying of apron with cement concrete blocks of size 0.5x0.5x0.5 m cast in-situ
and made with nominal mix of M- 15 grade cement concrete with a minimum
cement content of 240 kg / cum as per IRC: 21-2000 complete as per
specifications MORTH Specification No. 2503
30.4 KSRRB M2500- Pitching KSRRB M2500-3. Providing and laying Filter material cum
underneath pitching in slopes complete as per drawing and Technical
specification MORTH Specification No. 2504
30.5 KSRRB M2500-4.1. Providing and laying Pitching stones of size 0.3x0.3x0.3 m cum
on slopes laid over prepared filter media including boulder apron laid dry in
front of toe of embankment complete as per drawing and Technical
specifications including cost of materials, labour, HOM complete as per
specifications. A. Stone I Boulder MORTH Specification No. 2504

30.6 KSRRB M2500-4.2. Providing and laying Pitching on slopes laid over prepared cum
filter media including boulder apron laid dry in front of toe of embankment
complete as per drawing and Technical specifications complete as per
specifications. B) Cement Concrete Blocks of size 0.3x0.3 x0.3 m cast in
cement concrete of mix 1:2:4
30.7 KSRRB M2500-5.1. Providing and laying Flooring with Rubble stone in em 1:3 cum
over a bed of 1OOmm thick CC bed of 1:2:4 mix proportion including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2505
30.8 "KSRRB M2500-5.2. Providing and laying Flooring with cement concrete cum
blocks made out of proportion 1:2:4 over a bed of 1OOmm thick CC bed of
1:2:4 mix proportion including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2505
30.10 "KSRRB M2500-7. Supplying and laying of mechanically bonded poly cum
propylene non woven geotextile as filter media below mattress as per MORTH
700 Type-1 geotextile. The width of geotextile roll shall not be less than 4.5m,
at easily accessible location including top and bottom, with all leads and lifts,
labour, materials and machinery etc. complete and as directed by Engineer-in-
charge of the works, complete as per specifications. MORTH Specification No.
700 & 2504

30.15 KSRRB M2500- Gabian Structure KSRRB M2500.12. Providing and cum
construction of a gabian structure for retaining earth with segments of wire
crates of size 7 m x 3 m x 0.6 m each divided into 1.5 m compartments by
cross netting, made from 4 mm galvanised steel wire at 32 kg per 10 sqm
having minimum tensile strength of 300 Mpa conforming to IS:280 and
galvanizing coating conforming to IS:4826, woven into mesh with double twist,
mesh size not exceeding 100 x 100 mm, filled with boulders with least
dimension of 200 mm, all loose ends to be tied with 4 mm galvanised steel
wire including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 2503.3
30.16 KSRRB M2500- Gabian Structure KSRRB M2500-13 Gabian Structure for cum
Erosion Control, River Training Works and Protection works Providing and
constructing gabian structures for erosion control, river training works and
protection works with wire crates of size 2 m x 1 m x 0.3 m each divided into
1m compartments by cross netting, made from 4 mm galvanised steel wire@
32 kg per 10 sqm having minimum tensile strength of 300 Mpa conforming to
IS:280 and galvanizing coating conforming to IS:4826, woven into mesh with
double twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders
with least dimension of 200 mm, all loose ends to be securely tied with 4 mm
galvanised steel wire including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2503.3
Basic Rate
1,613.00

2,155.00

5,781.00

2,342.00

1,613.00

5,781.00

4,629.00

6,540.00

118.00

3,060.00
5,254.00
Item No. Description Unit
31.1 KSRRB M2600-1. Providing and laying a burried expansion joint, expansion M
gap being 20 mm, covered with 12 mm thick, 200 mm wide galvanised
weldable structural steel plate as per IS: 2062, placed symmetrical to centre
line of the JOint, resting freely over the top surface of the deck concrete,
welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along
the centre line of the plate, including cost of materials, labour, HOM complete
as per specifications, all as specified in clause 2600.4 MORTH Specification
No. 2604

31.2 KSRRB M2600-2. (i) Providing & fixing 250 mm wide, 2 mm thick corrugated M
copper plate in expansion joint complete as per drawing & Technical
Specification including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2605
31.3 KSRRB M2600-3. (ii) Providing & fixing 250 mm wide, 20 mm thick M
compressible fibre board in expansion joint complete as per drawing &
Technical Specification including cost of materials, labour, HOM complete as
per specifications. MORTH Specification No. 2605
31.4 KSRRB M2600-4. (iii)Providing and fixing in position 300 mm wide, 20 mm M
thick premoulded joint filler in expansion joint for fixed ends of simply
supported spans not exceeding 10 m to cater for a horizontal movement upto
20 mm, covered with sealant complete as per drawing & Technical
Specification MORTH Specification No. 2605
31.5 KSRRB M2600-5.(iv) Providing and filling JOint sealing compound upto a M
depth of 1 OOmm as per drawings and technical specifications with coarse
sand and 6 per cent bitumen by weight complete as per specifications MORTH
Specification No. 2605
31.6 KSRRB M2600-6. Providing and laying of asphaltic plug joint to provide for M
horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint
varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm (in
traffic direction), covered with a closure plate of 200mm x 6mm of weldable
structural steel conforming to IS: 2062, asphaltic plug to consist of polymer
modified bitumen binder, carefully selected single size aggregate of 12.5 mm
nominal size and a heat resistant foam caulking/backer rod, all as per
approved drawings and specifications, including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No. 2600

31.7 KSRRB M2600-7. Providing and laying of an elastomeric slab steel expansion M
JOint, catering to right or skew (less than 20 deg., moderately curved with
maximum horizontal movement upto 50 mm, complete as per approved
drawings and standard specifications to be installed by the
manufacturer/supplier or their authorised representative ensuring compliance
to the manufacturer's instructions for installation and clause 2600.6 of MORTH
specifications for road & bridge works including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No. 2606

31.8 KSRRB M2600-8. Providing and laying of compression seal JOint consisting of M
steel armoured nosing at two edges of the JOint gap suitably anchored to the
deck concrete and a preformed chloroprene elastomer or closed cell foam
JOint sealer compressed and fixed into the joint gap with special adhesive
binder to cater for a horizontal movement upto 40 mm and vertical movement
of 3 mm including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2600
31.9 KSRRB M2600-9. Providing and laying of a strip seal expansion JOint catering M
to maximum horizontal movement upto 70 mm, complete as per approved
drawings and standard specifications to be installed by the manufacturer/
supplier or their authorised representative ensuring compliance to the
manufacturer's instructions for installation including cost of materials, labour,
HOM complete as per specifications. MORTH Specification No. 2607

31.10 KSRRB M2600-10. Providing and laying of a modular strip Box seal expansion M
JOint including anchorage catering to a horizontal movement beyond 70 mm
and upto 140mm, complete as per approved drawings and standard
specifications to be installed by the manufacturer/supplier or their authorised
representative ensuring compliance to the manufacturer's instructions for
installation including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2600

31.11 KSRRB M2600-11 Providing and laying of a modular strip box seal expansion M
JOint catering to a horizontal movement beyond 140mm and upto 21 Omm,
complete as per approved drawings and standard specifications to be installed
by the manufacturer/supplier or their authorised representative ensuring
compliance to the manufacturer's instructions for installation. including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2600
Basic Rate
1,194.00

2,485.00

119.00

155.00

34.00

1,207.00

13,951.00

17,035.00
13,939.00

6,234.00

7,627.00
Item No. Description Unit
32.1 KSRRB M2700-1. Providing and laying 12 mm thick mastic asphalt wearing Sqm
course on top of deck slab excluding prime coat with paving grade bitumen
meeting the requirements given in table 500-29, prepared by using mastic
cooker and laid to required level and slope after cleaning the surface, including
providing antiskid surface with bitumen precoated fine grained hard stone
chipping of 9.5 mm nominal size at the rate of 0.005cum per 10 sqm and at an
approximate spacing of 10 em center to center in both directions, pressed into
surface when the temperature of surfaces not less than 100 deg. C, protruding
1 mm to 4 mm over mastic surface, all complete as per clause 5100.5
complete as per specifications. MORTH Specification No. 515 & 2702

32.2 KSRRB M2700-2. Construction of precast RCC railing of M-30 Grade, M

aggregate size not exceeding 12 mm, true to line and grade, tolerance of
vertical RCC post not to exceed 1 in 500, centre to centre spacing between
vertical post not to exceed 2000 mm, leaving adequate space between vertical
post for expansion, complete as per approved drawings and technical
specifications including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2703,1500,1600 & 1700

32.3 KSRRB M2700-3. Construction of RCC railing ofM30 Grade in-situ with 20 mm M
nominal size aggregate, true to line and grade, tolerance of vertical RCC post
not to exceed 1 in 500, centre to centre spacing between vertical post not to
exceed 2000 mm, leaving adequate space between vertical post for
expansion, complete as per approved drawings and technical specifications
including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 2703,1500,1600 & 1700

32.4 KSRRB M2700-4. Providing, fitting and fixing mild steel railing using ISMC @ M
29.46 kg/m, MS flats @ 10.12 kg/m and MS bars @ 1.80 kg/m as per drawing
and Technical Specification including bolts and nuts etc., including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2703.2, 1900
32.5 KSRRB M2700-5. Drainage Spouts using 1OOmm class 'B' Gl pipe as per No
drawing and Technical specification including clamps and nuts etc., including
cost of materials, labour, HOM complete as per specifications. MORTH
Specification No. 2705
32.6 KSRRB M2700-6. PCC M15 Grade leveling course below approach slab cum
complete as per drawing and Technical specification complete as per
specifications MORTH Specification No. 2700
32.7 KSRRB M2700-7. Reinforced cement concrete M30 approach slab including cum
reinforcement@ 70 kg/cum and formwork complete as per drawing and
Technical specification including cost of materials, labour, HOM complete as
per specifications. MORTH Specification No.1500, 1600, 1700 & 2704

32.8 KSRRB M2300-16. Providing and laying Cement concrete wearing coat with cum
OPC cement design mix M30 @ 360 kgs, with 20mm and down size graded
granite metal coarse aggregates @0.69cum and fine aggregtes@ 0.46cum,
and reinforcement at 75 kg/cum with superplastisiser @31ts confirming to
IS9103-1999 Reaffirmed-2008 including cost of reinforcement complete as per
drawing and Technical Specifications including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No. 2702
32.9 KSRRB M2700-9. Providing, precasting, cement concrete with 470kg of cum
cement, 0.90cum of coarse aggregates and 0.45 cum of fine aggregates
including steel high tension strands and admixtures, transportation and placing
in position precast pretensioned concrete girders as per drawing and technical
specifications including the cost high tensiled strands including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No.1800 & 2300

32.10 KSRRB M2700-10. Providing and fixing Helical pipes in voided concrete slabs M
including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 1700 & 1800
32.11 KSRRB M2700-12. Providing and applying 2 coats ofwater based cement paint Sqm
to unplastered concrete surface after cleaning the surface of dirt, dust, oil,
grease, efflorescence and applying paint at of 1 litre for 2 sqm including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 800
32.13 Providing and laying 3mm thick asphalt seal pad made of actatic polypropylene Sqm
polymer (app) modified bituminous pad reinforced with non woven polyester
mat of high bear strength as a carrier (confirming to ASTM - 06222 (S)
Specification) on concrete bridge deck slab including cost of materials, labour,
HOM complete as per specifications.
Basic Rate
314.00

1,817.00

1,786.00

2,763.00

1,618.00

5,893.00

10,348.00

10,688.00
23,374.00

400.00

66.00

574.00
Item No. Description Unit
33.1 KSRRB M2800-1. Removal of existing cement concrete wearing coat including Sqm
its disposal complete as per Technical Specification without causing any
detrimental effect to any part of the bridge structure and removal of dismantled
material with all lifts and lead including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No.2809

33.2 KSRRB M2800-2. Removal of existing asphaltic wearing coat comprising of 50 Sqm
mm thick asphaltic concert laid over 12 mm thick mastic asphalt including
disposal with all lift and lead including cost of materials, labour, HOM complete
as per specifications. MORTH Specification No. 2809
33.3 KSRRB M2800-3. Guniting concrete surface with cement mortar applied with Sqm
compressor after cleaning surface and spraying with epoxy including cost of
materials, labour, HOM complete as per specifications, complete as per
Technical Specification. MORTH Specification No.2807
33.4 KSRRB M2800-4. Providing and inserting nipples with approved fixing No
compound after drilling holes for grouting as per Technical Specifications
including subsequent cutting/removal and sealing of the hole as necessary of
nipples after completion of grouting with Cement I Epoxy including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2800

33.5 "KSRRB M2800-5.1. Sealing of cracks Iporous concrete by inJection process kgs
through nipples/Grouting complete as per Technical Specification including
cost of materials, labour, HOM complete as per specifications. A. Cement
Grout" MORTH Specification No. 2806
33.6 "KSRRB M2800-5.2. Sealing of cracks Iporous concrete by injection process kgs
through nipples/Grouting complete as per Technical Specification, including
cost of materials, labour, HOM complete as per specifications. B. Cement
Mortar (1:1) Grouting" MORTH Specification No. 2806
33.7 KSRRB M2800-6. Patching of damaged concrete surface with polymer Sqm
concrete and curing compounds, initiator and promoter, available in present
formulations, to be applied as per instructions of manufacturer and as
approved by the Engineer including cost of materials, labour, HOM complete
as per specifications. MORTH Specification No. 2800
33.8 KSRRB M2800-7. Sealing of crack I porous concrete with Epoxy Grout by kgs
injection through nipples complete as per clause 2800.3.1 including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 2803
33.9 KSRRB M2800-8. Applying epoxy mortar over leached, honey combed and Sqm
spalled concrete surface and exposed steel reinforcement complete as per
Technical Specification, including cost of materials, labour, HOM complete as
per specifications. MORTH Specification No. 2804
33.10 KSRRB M2800-9. Removal of defective concrete, cleaning the surface Sqm
thoroughly, applying the shotcrete mixture mechanically with compressed air
under pressure, comprising of cement, sand, coarse aggregates, water and
quick setting compound in the proportion as per clause 2800.7.1. sand and
coarse aggregates conforming to IS: 383 and table 1 of IS: 9012 respectively,
water cement ratio ranging from 0.35 to 0.50, density of gunite not less than
2000 kg/cum, strength not less than 25 Mpa and workmanship conforming to
clause 2800.7.6 including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2807

33.11 KSRRB M2800-10. Applying pre-packed cement based polymer mortar of Sqm
strength 45 Mpa at 28 days for replacement of spalled concrete including cost
of materials, labour, HOM complete as per specifications. MORTH
Specification No. 2800
33.12 KSRRBM 2800-11. Epoxy bonding of new concrete to old concrete including Sqm
cost of materials, labour, HOM complete as per specifications. MORTH
Specification No. 2805
33.13 KSRRB M2800-12.1. Providing external prestressing with high tensile steel Tonne
wires I strands for taking output of 1 MT, including drilling for passage of
prestessing steel, all accessories for stressing and stressing operation and
grouting complete as per drawing and Technical Specification including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 1800 & 2300

33.14 KSRRB M2800-12.2. Providing external prestressing with high tensile steel Tonne
wires /strands for taking output of 3.10 MT, including drilling for passage of
prestessing steel, all accessories for stressing and stressing operation and
grouting complete as per drawing and Technical Specification including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 1800 & 2300

33.15 KSRRB M2800-12.3. Providing external prestressing with high tensile steel Tonne
wires I strands for taking output of9.28 MT, including drilling for passage of
prestessing steel, all accessories for stressing and stressing operation and
grouting complete as per drawing and Technical Specification including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 1800 & 2300

33.16.1 KSRRB M2800-13. Replacement of Bearings complete as per Technical Nos

Specification including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2810 Bearing Rocker & Roller
including cost of materials, labour, HOM complete as per specifications.
33.16.2 KSRRB M2800-13. Replacement of Bearings complete as per Technical No
Specification including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2810 Bearing Neoprene including
cost of materials, labour, HOM complete as per specifications.
33.18 KSRRB M2800-15. Replacement of Corrugated Copper Plate in Expansion M
Joints and finished with wearing coat complete as per drawings including cost
of materials, labour, HOM complete as per specifications. MORTH
Specification No. 2605, 2300
33.19 KSRRB M2800-16. Replacement of Damaged Concrete Railing including cost M
of materials, labour, HOM complete as per specifications
33.20 KSRRB M2800-17. Replacement of Crash Barrier including cost of materials, M
labour, HOM complete as per specifications.
33.21 KSRRB M2800-18. Replacement of Damaged Mild SteelRailing including cost M
of materials, labour, HOM complete as per specifications.
33.22 KSRRB M2800-19. Repair of Crash Barrier. Repair of concrete crash barrier M
with cement concrete of M-30 grade by cutting and trimming the damaged
portion to a regular shape, cleaning the area to be repaired thoroughly,
applying cement concert after erection of proper form work including cost of
materials, labour, HOM complete as per specifications.
33.23 KSRRB M2800-20. Repair of RCC Railing Carrying out repair of RCC M-30 M
railing to bring it to the original shape including cost of materials, labour, HOM
complete as per specifications.
33.24 KSRRB M2800-21. Repair of Steel Railing to bring it to the original shape M
including cost of materials, labour, HOM complete as per specifications.
Basic Rate
99.00

71.00

564.00

136.00

250.00

247.00

676.00

396.00

446.00

272.00

391.00
 573.00

421,187.00

316,165.00

284,832.00

14,009.00

10,792.00

2,030.00

299.00

578.00

244.00

213.00

103.00

241.00
Item No. Description Unit
34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement cum
concrete M10 mix with crushed stone aggregate 40mm nominal size
mechanically mixed, placed in foundation and compacted by vibration including
curing including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 408
34.2 KSRRB M2900-2.1. Laying Reinforced cement concrete pipe NP4/ prestressed M
concrete pipe for culverts on first class bedding of granular material in single
row including fixing collar with cement mortar 1:2 but excluding excavation,
protection works, backfilling, concrete and masonry works in head walls and
parapets, curing including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2900 & IS 458- 2003 A. 1000 mm dia

34.3 KSRRB M2900-2.1. Laying Reinforced cement concrete pipe NP4/ prestressed M
concrete pipe for culverts on first class bedding of granular material in single
row including fixing collar with cement mortar 1:2 but excluding excavation,
protection works, backfilling, concrete and masonry works in head walls and
parapets, curing including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2900 & IS 458- 2003 B. 1200 mm dia

34.4 KSRRB M2900-3.1. Laying Reinforced cement concrete pipe NP4/ prestressed M
concrete pipe for culverts on first class bedding of granular material in double
row including fixing collar with cement mortar 1:2 but excluding excavation,
protection works, backfilling, concrete and masonry works in head walls and
parapets curing, including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2900 & IS 458 - 2003 A. 1000 mm dia

34.5 KSRRB M2900-3.1. Laying Reinforced cement concrete pipe NP4/ prestressed M
concrete pipe for culverts on first class bedding of granular material in double
row including fixing collar with cement mortar 1:2 but excluding excavation,
protection works, backfilling, concrete and masonry works in head walls and
parapets curing, including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 2900 & IS 458 - 2003 B. 1200 mm
dia

34.6.1 Providing and laying reinforced cement concrete pipe NP3 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 300mm. dia

34.6.2 Providing and laying reinforced cement concrete pipe NP3 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 450mm. dia

34.6.3 Providing and laying reinforced cement concrete pipe NP3 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 600mm. dia

34.6.4 Providing and laying reinforced cement concrete pipe NP3 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 750mm. dia
34.6.5 Providing and laying reinforced cement concrete pipe NP3 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 900mm. dia

34.6.6 Providing and laying reinforced cement concrete pipe NP3 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 1200mm. dia

34.7.1 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - -150mm dia

34.7.2 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 250mm dia

34.7.3 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 300mm dia

34.7.4 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 450mm dia

34.7.5 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 600mm dia

34.7.6 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 750mm dia

34.7.7 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 900mm dia

34.7.8 Providing and laying reinforced cement concrete pipe NP2 for culverts M
including pointing ends, and fixing collars with cement mortar 1:2 including cost
of all materials, labour, curing complete as per specifications. Specifications.
No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 1200mm dia

34.8.1 Providing and constructing granite / trap / basalt size stone masonry in cum
foundation with cement mortar 1:8 stone hammerd dressed in courses not less
than 20 cms high, bond stones at two m. apart in each course including cost of
materials, labour, curing complete as per specifications. KBS 5.1.13
34.8.2 Providing and constructing granite / trap / basalt size stone masonry in cum
foundation with cement mortar 1:6 stone hammerd dressed in courses not less
than 20 cms high, bond stones at two m. apart in each course including cost of
materials, labour, curing complete as per specifications. KBS 5.1.13

34.9 Providing and constructing granite / trap / basalt size stone masonry in cum
basement with cement mortar 1:6, edges of stones chistle dressed in courses
not less than 15 cms high, bond stones at two m. apart in each course
including cost of materials, labour, curing complete as per specifications.

34.10.1 Providing and constructing granite / trap / basalt size stone masonry in cum
superstructure with cement mortar & edges of stones chistle dressed in
courses not less than 15 cms high, bond stones at two m. apart in each course
including cost of materials, labour, scaffolding, curing complete as per
specifications. KBS 5.1.13 - do - with cement mortar 1:6
34.10.2 Providing and constructing granite / trap / basalt size stone masonry in cum
superstructure with cement mortar & edges of stones chistle dressed in
courses not less than 15 cms high, bond stones at two m. apart in each course
including cost of materials, labour, scaffolding, curing complete as per
specifications. KBS 5.1.13 - do - with cement mortar 1:4
34.11 Providing and laying in position plain cement concrete of mix 1:2:4 with cement cum
@ 240kgs, with 20mm and down size graded granite metal coarse aggregates
@ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in
layers not exceeding 15 cms. thick, well compacted, for coping. Including cost
of all materials, labour, HOM of machinery, curing complete as per
specifications. Specification No. KBS 4.1, 4.2

34.12.1 Providing flush pointing to square rubble, course or uncoursed stone masonry Sqm
with cement mortar, 20mm deep, after raking joints to depth of 20mm nicely
lining, including cost of materials, labour, curing complete as per specifications.
– do – cement mortar 1:4
34.12.2 Providing flush pointing to square rubble, course or uncoursed stone masonry Sqm
with cement mortar, 20mm deep, after raking joints to depth of 20mm nicely
lining, including cost of materials, labour, curing complete as per specifications.
– do – cement mortar 1:3
34.13.1 Providing ruled pointing to coursed stone masonry with cement mortar, 20mm Sqm
deep, after raking joints to depth of 20mm nicely lining, including cost of
materials, labour, curing complete as per specifications. – do – cement mortar
1:4
34.13.2 Providing ruled pointing to coursed stone masonry with cement mortar, 20mm Sqm
deep, after raking joints to depth of 20mm nicely lining, including cost of
materials, labour, curing complete as per specifications. – do – cement mortar
1:3
34.14 Providing and constucting pithcing / Revetment of 30 cm thick on slopes using Sqm
granite/basalt/trap/stones of surface area not less than 0.04 sqm and wedged
with spalls including cost of all materials, labour etc., complete as per
specification.
34.15.1 Earth work in excavation for foundation of structures like culverts, retaining cum
walls etc., as per drawing and technical specification, including setting out,
construction of shoring and bracing, dressing of sides and bottom, backfilling
with approved material, disposal of balance earth as per specifications,
including cost of labour, HOM etc. , complete. in all kinds of soil by manual
means.
34.15.2 Earth work in excavation for foundation of structures like culverts, retaining cum
walls etc., as per drawing and technical specification, including setting out,
construction of shoring and bracing, dressing of sides and bottom, backfilling
with approved material, disposal of balance earth as per specifications,
including cost of labour, HOM etc. , complete. in all kinds of soil by mechanical
means.

34.15.3 Earth work in excavation for foundation of structures like culverts, retaining cum
walls etc., as per drawing and technical specification, including setting out,
construction of shoring and bracing, dressing of sides and bottom, backfilling
with approved material, disposal of balance earth as per specifications,
including cost of labour, HOM etc. , complete. in ordinary rock/ soft rock by
manual means.

34.15.4 Earth work in excavation for foundation of structures like culverts, retaining cum
walls etc., as per drawing and technical specification, including setting out,
construction of shoring and bracing, dressing of sides and bottom, backfilling
with approved material, disposal of balance earth as per specifications,
including cost of labour, HOM etc. , complete. in ordinary rock/ soft rock by
mechanical means.

34.15.5 Earth work in excavation for foundation of structures like culverts, retaining cum
walls etc., as per drawing and technical specification, including setting out,
construction of shoring and bracing, dressing of sides and bottom, backfilling
with approved material, disposal of balance earth as per specifications,
including cost of labour, HOM etc. , complete. in hard rock with blasting.

34.15.6 Earth work in excavation for foundation of structures like culverts, retaining cum
walls etc., as per drawing and technical specification, including setting out,
construction of shoring and bracing, dressing of sides and bottom, backfilling
with approved material, disposal of balance earth as per specifications,
including cost of labour, HOM etc. , complete. in hard rock without blasting.

34.16 Providing and laying in position plain cement concrete of mix 1:2:4 for sub- cum
structure works like Culverts, retaining walls etc. , with cement @ 240 kgs, 40
mm & down size graded granite metal coarse aggregate @ 0.84 cum and fine
aggregates @ 0.46 cum machine mixed, with necessary scaffolding,form work
etc. , including cost of labour, HOM curing etc., complete.

34.17 Providing and laying in position plain/Reinforced cement cement concrete M20 cum
for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm &
down size graded granite metal coarse aggregate @ 0.69 cum and fine
aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts
confirming to IS 9103-2008,concrete laid in layers, well compacted and
providing weep holes wherever necessary with necessary scaffolding, form
work etc., including cost of labour, HOM curing etc., complete.
Basic Rate
4,444.00

9,095.00

10,197.00

18,289.00

20,501.00

1,535.00

2,584.00

3,193.00

3,469.00
5,503.00

8,430.00

391.00

528.00

1,056.00

1,440.00

2,160.00

2,672.00

3,384.00

5,640.00

4,540.00
4,645.00

5,532.00

5,833.00

5,857.00

5,747.00

142.00

140.00

141.00

143.00

447.00

180.00
 45.00

257.00

55.00

540.00

434.00

4,969.00

5,300.00
Item No. Description Unit
35.1 KSRRB M3000-1. Restoration of rain cuts with soil, moorum, gravel or a M
mixture of these, clearing the loose soil, benching for 300 mm width, laying
fresh material in layers not exceeding 250 mm and compacting with plate
compactor or power rammers to restore the original alignment, levels and
slopes including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 3002

35.2 KSRRB M3000-2. Making up loss of material I irregularities on shoulder to a Sqm

minimum depth of 150mm to the design level by adding fresh approved soil
and compacting it with appropriate equipment including cost of materials,
labour, HOM complete as per specifications. MORTH Specification No.3003

35.3 KSRRB M3000-3. Stripping excess soil from the shoulder surface to a Sqm
minimum depth of 150mm to achieve the approved level and compacting with
plate compactor including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 3003
35.4 KSRRB 3000 Filling Pot-holes and Patch Repairs with Open-Graded Premix Sqm
Surfacing, 20 mm KSRRB M3000-4. Removal of all failed material, trimming of
completed excavation to provide firm vertical faces, cleaning of surface,
applying tack coat on the sides and base of excavation at 040 kgs/sqm as per
clause 500.3, and filling the pot holes with open graded pre-mix material as per
clause 500.11, & sealing the surface with Type-B seal coat as per clause 513
compacting the surface to form a smooth continuous surface, including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 3004.2

35.5 KSRRB 3000 Filling Pot-holes and Patch Repairs with Bituminous Concrete, Sqm
40 mm KSRRB M3000-5. Removal of all failed material, trimming of completed
excavation to provide firm vertical faces, cleaning of surface, applying tack
coat on the sides and base of excavation at 2.5kg/1Osqm as per clause 500.3,
filling back the pot holes with hot bituminous material as per clause 500.4,
compacting, trimming and finishing the surface to form a smooth continuous
surface, all as per clause 3004.2 including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No. 3004.2

35.6 KSRRB M3000-6. Filling of crack using slow- curing bitumen emulsion and M
applying crusher dust in case crack are wider than 3mm including cost of
materials, labour, HOM complete as per specifications. MORTH Specification
No. 3004.3.3
35.7 KSRRB M3000-7. Applying crusher dust to areas of road where bleeding of M
excess bitumen has occurred including cost of materials, labour, HOM
complete as per specifications. MORTH Specification No. 3004.4
35.8 KSRRB 3000 Repair of Joint Grooves with Epoxy Mortar KSRRB M3000-8. M
Repair of spalled joint grooves of contraction joints, longitudinal joints and
expansion joints in concrete pavements using epoxy mortar or epoxy concrete
including cost of materials, labour, HOM complete as per specifications.
MORTH Specification No. 3005.1
35.9 KSRRB M3000-9. Removal of existing sealant and re sealing of contraction, M
longitudinal or expansion joints in concrete pavement with fresh sealant
material including cost of materials, labour, HOM complete as per
specifications. MORTH Specification No. 3005.2
35.10 KSRRB M3000-10. Removal of earth from the choked hill side drain and M
disposing it on the valley side manually including cost of materials, labour,
HOM complete as per specifications. MORTH Specification No. 3000
35.11 KSRRBM 3000-11. Clearance of land slides in soil and ordinary rock by a bull- cum
dozer D 80 A-12, 180 HP and disposal of the same on the valley side including
cost of materials, labour, HOM complete as per specifications. MORTH
Specification No. 3000
35.12 KSRRB M3000-12. Clearing of land slide in hard rock requiring blasting for cum
50% of the boulders and disposal of the same on the valley side including cost
of materials, labour, HOM complete as per specifications. MORTH
Specification No. 3000
35.13.1 Patching of deep potholes by restoring the granular base course using material Sqm
confirming to V'vBM grade -Ill standardsNVMM wherver necessary by manual
means including trimming the pothole to the required shape and size, cleaning
the pothole applying tack coat at 4 kg/1Osqm over the V'vBM/ WMM surface
including cleaning etc, and covering the surface with premixed mix seal TYPE-
A 20mm thick including lead, loading unloading, rolling and finishing etc.,
including cost of materials, labour, HOM complete as per specifications.
Complete as per standard specification.. - - upto 75 mm thick

35.13.2 Patching of deep potholes by restoring the granular base course using material Sqm
confirming to V'vBM grade -Ill standardsNVMM wherver necessary by manual
means including trimming the pothole to the required shape and size, cleaning
the pothole applying tack coat at 4 kg/1Osqm over the V'vBM/ WMM surface
including cleaning etc, and covering the surface with premixed mix seal TYPE-
A 20mm thick including lead, loading unloading, rolling and finishing etc.,
including cost of materials, labour, HOM complete as per specifications.
Complete as per standard specification.. - - upto 150mm thick

35.14.1 Patching of shallow potholes on asphalt surfaces by using corresponding Sqm

standard premixes including removing the failed materials on the road surface,
preparation of potholes to the required standards before patching them,
application of tack coat at 2.5 kg/10 sqm over the asphalt surface including
lead, loading unloading, rolling and finishing etc., including cost of materials,
labour, HOM complete as per specifications. complete as per standard
specification.. - - using MSS Type - A upto 20 mm thick

35.14.2 Patching of shallow potholes on asphalt surfaces by using corresponding Sqm

standard premixes including removing the failed materials on the road surface,
preparation of potholes to the required standards before patching them,
application of tack coat at 2.5 kg/10 sqm over the asphalt surface including
lead, loading unloading, rolling and finishing etc., including cost of materials,
labour, HOM complete as per specifications. complete as per standard
specification. - - using SDBC 25 mm thick.

35.14.3 Patching of shallow potholes on asphalt surfaces by using corresponding Sqm

standard premixes including removing the failed materials on the road surface,
preparation of potholes to the required standards before patching them,
application of tack coat at 2.5 kg/10 sqm over the asphalt surface including
lead, loading unloading, rolling and finishing etc., including cost of materials,
labour, HOM complete as per specifications. complete as per standard
specification.. - - using BM for base coarse 50mm thick and 25mm thick SDBC
for finishing

35.14.4 Patching of shallow potholes on asphalt surfaces by using corresponding Sqm

standard premixes including removing the failed materials on the road surface,
preparation of potholes to the required standards before patching them,
application of tack coat at 2.5 kg/10 sqm over the asphalt surface including
lead, loading unloading, rolling and finishing etc., including cost of materials,
labour, HOM complete as per specifications. complete as per standard
specification.. - - using BM for base coarse 50mm thick and BC 40mm thick for
finishing

35.15 Supplying, placing & compacting ready made cold bituminous pothole patching 50 Kg Bag
mix in accordance with IRC 116-2014 in 50 kg plastic sturdy bags. The mix
shall contain at least 5.6% MC 800 cutback Bitumen & suitable anti-stripping
agent The mix shall be workable for at least 6 months.
Basic Rate
123.00

28.00

15.00

205.00

360.00

4.00

1.00

331.00

42.00

54.00

12.00
 54.00

363.00

471.00

193.00

206.00

399.00

592.00

336.00
Item No. Description Unit
36.1 Assembling, joining and laying of soil reinforcing elements connecting with M
precast facia panels, connecting arrangements, necessary anti corrosive
coating, all materials, labour, lead and lift, plants a plants, machinery, complete
as per the direction of the Engineer-in-charge and complying with Technical
specifications clause 3100 of MORTH specifications (using Ganvanised steel
strips)

36.2 Assembling, Joining and laying of soil reinforcing elements connecting with Sqm
precast modular blocks, including connecting arrangements, all materials,
labour, lead and lift, plants and machinery complete as per the directions of
engineer incharge of the work. Clause 3100 of MORTH specification.

36.3 Providing and laying in position M35 grade pre cast concrete facia panel with Sqm
architectural finish with a thickness as per approved drawing, but not less than
minimum 140mm thick excluding architectural finishes and including TMT
reinforcement bars as per approved drawing for reinforced earth wall using
OPC which includes providing initial leveling pad as necessary (minimum
150mm thick and having suitable width) using M15 grade plain cement
concrete, an aesthetic architectural finish, necessary connection arrangements
for soil reinforcement (as shown in the drawing), necessary coping beam,
neoprene sponge joint material between reinforced soil wall facia and crash
barriers, the backfill material and the drainage material shall be separated
using permeable non-woven geotextile, necessary anchor rods at the toe of
wall for laying first pre cast panel including all materials, labour, lead and lift,
plants, machinery, complete as per the direction of the Engineer-in-charge and
copying with Technical specifications clause 3100 of MORTH specifications
Basic Rate
236.00

323.00

1,868.00
Item No. Description Unit
37.1.1 Providing erecting and removing casurinapole Barricading using poles of 7.50 M
to 10 cms. Dia and 1.5 height above ground fixed vertically at intervals of 2.0
to 2.5 mtrs. C/C and Horizontally at 0.50 mtrs, above ground level, including
fixing poles in the ground level for minimum depth of 0.30 mtr and tied with coir
rope firmly including cost and conveyance of all materials, labour, lead and lift
charges and complete. - - For two tier Barricading

37.1.2 Providing erecting and removing casurinapole Barricading using poles of 7.50 M
to 10 cms. Dia and 1.5 height above ground fixed vertically at intervals of 2.0
to 2.5 mtrs. C/C and Horizontally at 0.50 mtrs, above ground level, including
fixing poles in the ground level for minimum depth of 0.30 mtr and tied with coir
rope firmly including cost and conveyance of all materials, labour, lead and lift
charges and complete. - - For three tier Barricading

37.2 Supplying and fixing M.S. Rectangular poles made out of 2 equal angles M
of65x65x6 mm welded together and fixed in CC (1 :2:4) WITH 2 NOS 16mm
dia M.S. hold fast rods each of length 25 ems. Including cost of all materials
cutting, bending scaffolding wherever necessary, nicely finishing the welded
joints with all lead lifts and as per the directions of the Engineer-in- charge of
the work and including providing 2 coats of approved quality paint over one
coat of shop painting (excluding cost of earthwork and concrete) including cost
of materials, labour, HOM complete as per specifications.

37.3 Providing chain link fencing 50mm size of 8 guage properly stretched between Sqm
existing rectangular poles and fixed with suitable bolts & nuts, the free ends
shall be welded to the pole and block pipe at top and bottom as required
including cost of all materials, labour, lead and lifts and as per the directions of
the Engineer-in-charge of work including two coats of approved quality paint
over one coat of shop paint, including cost of materials, labour, HOM complete
as per specifications.

37.4 Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 M
including removing the bends, cutting the pipe, and fixing pipe in between the
existing tvvo verticle poles (M.S. rectangular poles) and spot welding the chain
link with M.S. block pipe including cost of all materials wastage in cutting, and
scaffolding wherever necessary with all lead and lift as directed by the
Engineer-in-charge of work etc., complete including two coats of approved
quality paint over one coat of shop paint, including cost of materials, labour,
HOM complete as per specifications

37.5 Providing barbed Gl wire fencing of 12x12 gauge drawn into stone pillars or M
iron pillars including drawing in holes wherever necessary excluding the cost of
pillars but including the cost of barbed wire and binding wire etc., including cost
of materials, labour, HOM complete as per specifications.
37.6 Providing corrugated cement asbestos Ridge sheets set in C.M. 1:3 and M
pointed with C.M. 1 :3. including cost of materials, labour, HOM complete as
per specifications.
37.7 Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M. 1:2. M
including cost of materials, labour, HOM complete as per specifications.
37.8 Fixing doors, window and ventilators in walls.including cost of materials, No
labour, HOM complete as per specifications
37.9 Supplying and fixing new Mangalore tiles on existing reepers including cost of Sqm
materials, labour, HOM complete as per specifications.
37.10 Removing and fixing old Mangalore ridge tiles including pointing with C.M. 1:3. M
including cost of materials, labour, HOM complete as per specifications.
37.11 Repairs to roof with available corrugated zinc sheets/ A.C. sheets with new J Sqm
bolts, screws and washers etc., on existing reeper and rafters. including cost of
materials, labour, HOM complete as per specifications.
37.12 Repairing door and window frames with available wood to the required size. Sqm
including cost of materials, labour, HOM complete as per specifications.
37.13 Repairing and fixing shutters (panelled or glazed) to doors, windows, Sqm
ventilators and cupboards. including cost of materials, labour, HOM complete
as per specifications.
37.14 Fixing old eve board with necessary screws and approved painting two coats. M
including cost of materials, labour, HOM complete as per specifications.

37.15 Providing and fixing plain rolled glass 3mm thick with TW beading of 1 Omm Sqm
thick. including cost of materials, labour, HOM complete as per specifications.

37.16 Providing and fixing 4mm thick glass panes to steel windows including TW Sqm
beading of 10 mm thick and 2 coats of approved paints. including cost of
materials, labour, HOM complete as per specifications.
37.17 Easing of shutters of door. including cost of materials, labour, HOM complete No
as per specifications.
37.18 Easing of window shutters. including cost of materials, labour, HOM complete No
as per specifications.
37.19 Providing and fixing M.S bars to windows and ventilators including cutting kgs
making holes in frame work with two coats of approved paints. including cost of
materials, labour, HOM complete as per specifications.
37.20 Labour charges for fixing iron bars to windows including cutting fixing and kgs
making holes in the frame work and painting two coats with approved paint
etc., including cost of materials, labour, HOM complete as per specifications.
complete (excluding the cost of iron bars)
37.21 Repairs to cornice or coping or mortar band, 15 em deep and Scm proJection Sqm
for damaged portion. including cost of materials, labour, HOM complete as per
specifications.
37.22 Removing cuddappa slab flooring and stacking the material with a lead of 50 Sqm
meters. including cost of materials, labour, HOM complete as per
specifications.
37.23 Removing and resetting Mangalore tiles and replacing broken ones wherever Sqm
necessary including cost of materials, labour, HOM complete as per
specifications. (excluding cost of new tiles).
37.24 Cleaning glass with chemicals. including cost of materials, labour, HOM Sqm
complete as per specifications
37.25 Removing and refixing existing mortar and pestle stone. including cost of Each
materials, labour, HOM complete as per specifications.
37.26 Removing by chiselling cement joints 50mm to 80mm deep in pipes upto Sqm
150mm dia. including cost of materials, labour, HOM complete as per
specifications.
37.27 Labour charges for fixing plain, frosted or pin headed glass panels (clear glass Sqm
area) with teakwood beading. including cost of materials, labour, HOM
complete as per specifications.
37.28.1 Drilling holes of2.50 ems dia (roof/chaJja/stone). including cost of materials, No
labour, HOM complete as per specifications. - - in slabs upto 7.50 cms thick

37.28.2 Drilling holes of2.50 ems dia (roof/chaJja/stone). including cost of materials, No
labour, HOM complete as per specifications. - - in slabs upto 10 cms thick

37.29.1 Providing and fixing mortar and pestle stone with suitable size of pestle stone Set
including three line dressing for top and two line dressing for the exposed
faces including cost of materials, labour, HOM complete as per specifications. -
- 50 cms x 50 cms x 60 cms
37.29.2 Providing and fixing mortar and pestle stone with suitable size of pestle stone Sqm
including three line dressing for top and two line dressing for the exposed
faces including cost of materials, labour, HOM complete as per specifications. -
- 40 cms x 40 cms x 40 cms
37.30 Providing wall black boards in CM 1:3 with two coats of black paint including Each
finishing etc., including cost of materials, labour, HOM complete as per
specifications.
37.31 Providing and fixing mortise locks heavy duty to doors. including cost of No
materials, labour, HOM complete as per specifications.
37.32 Providing and fixing hydraulic door closures-with mounting heavy duty. No
including cost of materials, labour, HOM complete as per specifications.
37.33 Providing and fixing hydraulic door closures-Aluminium body. including cost of No
materials, labour, HOM complete as per specifications.
37.34 Cleaning of glazed tiles. including cost of materials, labour, HOM complete as Sqm
per specifications.
37.35 Wall bores in Brick masonry upto 45 em thick. including cost of materials, Each
labour, HOM complete as per specifications.
37.36.1 Wall bores in size stone masonry. including cost of materials, labour, HOM Each
complete as per specifications.- - upto 45 cm thick.
37.36.2 Wall bores in size stone masonry. including cost of materials, labour, HOM Each
complete as per specifications. - - upto 60 to 90cm thick.
37.36.3 Wall bores in size stone masonry. including cost of materials, labour, HOM Each
complete as per specifications.- - upto 90 to 120 cm thick.
37.37 Cutting of road surface for pipeline trenches and disposing of the excavated cum
stuff as directed including barricading, danger lighting etc., in the Macadam
road including cost of materials, labour, HOM complete as per specifications.

37.38 Cutting of road surface for pipeline trenches and disposing of the excavated cum
stuff as directed including barricading, danger lighting etc., in the Asphalt
surface road including cost of materials, labour, HOM complete as per
specifications.
37.40 Cutting of road surface for pipeline trenches and disposing of the excavated cum
stuff as directed including barricading, danger lighting etc., in the Cement
concrete road including cost of materials, labour, HOM complete as per
specifications.
37.41.1 Diversion of water course by providing Coffer dams or bunds or islands as may cum
be necessary for piers and abutments foundations, bailing out or pumping
water during excavation and until completion etc., including cost of materials,
labour, HOM complete as per specifications. - - 1.50 mtrs depth below LWL.

37.41.2 Diversion of water course by providing Coffer dams or bunds or islands as may cum
be necessary for piers and abutments foundations, bailing out or pumping
water during excavation and until completion etc., including cost of materials,
labour, HOM complete as per specifications. - - beyond 1.50 mtrs depth upto &
including 3m depth.
37.41.3 Diversion of water course by providing Coffer dams or bunds or islands as may cum
be necessary for piers and abutments foundations, bailing out or pumping
water during excavation and until completion etc., including cost of materials,
labour, HOM complete as per specifications. - - beyond 3.00 mtrs depth upto &
including 4.5m depth.
37.41.4 Diversion of water course by providing Coffer dams or bunds or islands as may cum
be necessary for piers and abutments foundations, bailing out or pumping
water during excavation and until completion etc., including cost of materials,
labour, HOM complete as per specifications. - - beyond 4.50 mtrs depth upto &
including 6.00m depth.
37.42.1 Dismantling Mangalore tiles roof and stacking the material within a radius of 50 Sqm
meters. including cost of materials, labour, HOM complete as per
specifications. - - with reepers
37.42.2 Dismantling Mangalore tiles roof and stacking the material within a radius of 50 Sqm
meters. including cost of materials, labour, HOM complete as per
specifications. - - without reepers
37.42.3 Dismantling Mangalore tiles roof and stacking the material within a radius of 50 Sqm
meters. including cost of materials, labour, HOM complete as per
specifications. - A.C. sheet roofing.
37.43 Dismantling Cl or AC rain water Pipes with fittings and clamps and stacking the RMt
materials with a lead of 50 meters. including cost of materials, labour, HOM
complete as per specifications.
37.44 Dismantling weather proof course and removing and conveying the debris to a cum
distance upto 200m. including cost of materials, labour, HOM complete as per
specifications.
37.45 Dismantling Madras terrace jack arch roof including rafters and stacking the Sqm
materials with a lead upto 50m and removing the debris to a distance upto
200m. including cost of materials, labour, HOM complete as per specifications.

37.46 Dismantling stone slab roofing over wooden reepers or RCC battens Sqm
(dismantling reepers and battens to be paid for separately) including stacking
of serviceable materials and disposal of unserviceable within 200m lead (with
in average thickness of 10 ems including cost of materials, labour, HOM
complete as per specifications.
37.47 Dismantling burnt brick masonry in clay mortar/lime mortar/cement mortar and cum
stacking the bricks within a radius of 50m and removing the debris to a
distance upto 200m. including cost of materials, labour, HOM complete as per
specifications.
37.48 Dismantling size stone masonry in clay mortar and stacking the size stone cum
within a radius of 50m and removing the debris to a distance upto 200m.
including cost of materials, labour, HOM complete as per specifications.

37.49 Dismantling the tile work in floor and roof laid in cement or surki mortar Sqm
including stacking the materials with in 50 m lead of tiles thickness 10mm to
25mm. including cost of materials, labour, HOM complete as per specifications.

37.50 Dismantling plastering and removing the debris with a lead upto 200m. Sqm
including cost of materials, labour, HOM complete as per specifications.
37.51 Dismantling cement concrete flooring or plain cement concrete work including Sqm
removing and conveying the debris to distance upto 200m (within average
thickness of 15 cms). including cost of materials, labour, HOM complete as per
specifications.
37.52 Dismantling barbed wire or flexible wire rope in fencing including making rolls M
and stacking within 50m lead. including cost of materials, labour, HOM
complete as per specifications.
37.53 Dismantling expanded metal or IRC fabric with weld mesh necessary battens Sqm
and beading etc., including stacking the serviceable materials within 50 m lead.
including cost of materials, labour, HOM complete as per specifications.

37.54 Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge with Sqm
Mathi or Nandi wood patties of 50 mm x 12 mm size, including two coats
approved paint etc., complete. (Including cost of screws). including cost of
materials, labour, HOM complete as per specifications.
37.55 Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge with Sqm
Mathi or Nandi wood patties of 50 mm x 12 mm size, including two coats
approved paint etc., complete. (Including cost of screws). including cost of
materials, labour, HOM complete as per specifications. with weld mesh 75 mm
X 25 mm 6G X 10G.
37.56 Removing and resetting of footpath slab Sqm
37.57 Removing and resetting of kerb stones M
37.59.1 Providing and laying plain/reinforced cement concrete for side drains using cum
M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size
granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum
machine mixed, well compacted for walls and bottom including centering,
shuttering, cost of materials, HOM of machinery, curing etc., complete
excluding cost of steel as per MORTH specification No. 1500, 1700, 2200.
including cost of materials, labour, HOM complete as per specifications. Wall &
bottom thickness 10cm

37.59.2 Providing and laying plain/reinforced cement concrete for side drains using cum
M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size
granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum
machine mixed, well compacted for walls and bottom including centering,
shuttering, cost of materials, HOM of machinery, curing etc., complete
excluding cost of steel as per MORTH specification No. 1500, 1700, 2200.
including cost of materials, labour, HOM complete as per specifications. Wall &
bottom thickness 15cm

37.60 Providing and fixing RCC name board of size 1.35xk0.60x0.04 mtrs fixed in Each
reinforced cement concrete poles of size 0.1OxO.1Ox2.60mtrs in cement
concrete M 20 proportion using 20mm and down size graded metal machine
mixed with 1Omm dia main steel bars and 8mm dia stirups. The board shall be
provided with 12mm thick cement plaster in cement mortar 1 :3 on both the
sides. The poles shall be embedded in the ground for a depth of0.5 mtrs with
cement concrete M 10 proportion. The board shall be fixed as per the drawing
and atthe place indicated by the Engineer incharge of the work. The cost
includes excavation, bare cost of all materials, cost of steel, centering,
transportation charges, fixing charges, labour, HOM etc., The work shall be
carried out as per the detailed specifications, drawings and directions of the
Engineer in charge of the work.

37.61 Providing and fixing sign board of size 60x60cm equilateral triangle using M.S Each
sheet 5mm thick with RCC pole of size 0.15x0.15x2.3 mtr made out of cement
concrete M 20 proportion using 20mm and down size graded metal machine
mixed with 1Omm dia main steel bars and 8mm dia stirups. The poles shall be
embedded in the ground for a depth of 0.6mtrs with cement concrete M 10
proportion. The board shall be fixed as per the drawing and at the place
indicated by the Engineer incharge of the work. The cost includes excavation,
bare cost of all materials, cost of steel, centering, transportation charges, fixing
charges labour, HOM etc., The work shall be carried out as per the detailed
specifications, drawings and directions of the Engineer in charge of the work.
37.62 Providing and constructing informatory name board of size 1.75m x 1.75m with Each
Burnt brick masonry in CM 1:6 with non-modular bricks of standard size of
class designation 50 (table moulded). The foundation shall be provided with
cement concrete M 7.5 fora depth of 1Ocms and with size stone masonry with
Cement Mortar 1:6 and coping concrete with cement concrete M 10 as
indicated in the drawing. The name board shall be provided with 12mm thick
plaster in CM 1:6 on both the sides including rounding of corners. The name
board shall be provided with painting with 2 coats of enamel paint. The board
shall be fixed as per the drawing and at the place indicated by the Engineering
charge of the work. The cost includes excavation, cost of all materials,
centering, transportation charges, fixing charges labour, HOM etc., The work
shall be carried out as per the detailed specifications, drawings and directions
of the Engineer in charge of the work.

37.63.1 Providing two bulb underreemed pile foundation upto maximum 5m depth M
including hire charges of machineries digging the pile holes, labour charges
and laying 20mm and down size jelly RCC M 20 keeping the reinforcement
edge cutting etc., including cost of materials, labour, HOM complete as per
specifications. - - 23 cm dia
37.63.2 Providing two bulb underreemed pile foundation upto maximum 5m depth M
including hire charges of machineries digging the pile holes, labour charges
and laying 20mm and down size jelly RCC M 20 keeping the reinforcement
edge cutting etc., including cost of materials, labour, HOM complete as per
specifications. - - 30 cm dia
37.64 Providing and fixing RCC precast fencing pole of size 0 15m x 0 15m x 2.0m Each
casted in CC 1:1.5:3 with 20mm downsize aggregate making holes for drawing
barbed wire at 30cm etc using 10 mm dia vertical 4 TMT steel rods and Smm
dia stirrups at 15cm c/c fixed 1.5m above ground level using steel moulding,
curing, transportation to work spot including excavation in hard soil fixing in
plain cement concrete 1:2:4 using 20mm downsize aggregate including
aligning to plumb and line providing including cost of all materials, labour, hire
charge of machineries lead, lift loading & unloading etc.,Complete.

37.65.1 Providing and laying 100mm thick pre-cast U-shaped RCC drains using M20 M
grade Concrete reinforced with steel @ 5 kg per Sqm Precast units and jointed
in CM 1:3 proportion and neatly finished including cost of labour, materials,
HOM, curing, lead and lift charges etc, Complete as per MORTH specifications
No. 1500, 1700 With size of 450 mm x 450 mm inner dimensions

37.65.2 Providing and laying 100mm thick pre-cast U-shaped RCC drains using M20 M
grade Concrete reinforced with steel @ 5 kg per Sqm Precast units and jointed
in CM 1:3 proportion and neatly finished including cost of labour, materials,
HOM, curing, lead and lift charges etc, Complete as per MORTH specifications
No. 1500, 1700 With size of 450 mm x 600 mm inner dimensions

37.66 Providing and laying 1 OOmm thick pre-cast cover slabs over drains of width M
not exceeding 800 mm using M20 concrete reinforced with steel @ 6.00
kg/Sqm, slabs JOinted in CM 1:3 proportion and nicely finished including
providing holes in the Cover slabs wherever necessary for easy drainage of
surface water including of labour, materials, HOM, curing, lead and lift charges
etc, Complete as per MORTH specifications No. 1500, 1700.
Basic Rate
57.00

73.00

984.00

715.00

408.00

32.00

416.00

207.00

270.00

407.00

102.00
102.00

686.00

686.00

26.00

572.00

754.00

87.00

84.00

141.00

86.00

102.00

49.00

25.00

15.00

257.00

49.00

343.00

131.00

157.00

523.00
 419.00

805.00

568.00

1,417.00

987.00

68.00

126.00

303.00

329.00

379.00

299.00

449.00

686.00

296.00

394.00

649.00

802.00
 74.00

49.00

99.00

25.00

740.00

247.00

247.00

247.00

271.00

49.00

37.00

86.00

7.00

25.00

1,461.00
1,455.00

197.00
99.00
6,892.00

7,063.00

5,500.00

3,500.00
6,900.00

909.00

1,483.00

1,761.00

1,639.00

1,949.00

1,081.00
Item No. Description Unit
38.1 WATER PROOFING TO CONCRETE SURFACES Using Membrane Sqm
Technology For raft & retaining wall Providing & applying water proofing to
concrete surfaces using high quality polymer-modified bituminous compounds
(confirming to ASTM D 5147) reinforced with non woven polyester fabric,
weighing 180gm/sqm granular finish 4mm thick by torch on application method
confirming to the properties indicated below. It shall be provided after priming
the surface using bitumen primer at 0.2 ltr /sqm. Detailed specification &
Methodology 1. Membrane thickness 4mm (+ or – 5%) 2. Tensile strength –
Longitudinal 790 N/5cm Transverse 730 N/5cm 3. Elongation of Membrane -
Longitudinal 65% Transverse 69% 4. Tear Resistance - Longitudinal 180 N
Transverse 190 N 5. Lap joint strength - Longitudinal 750 N/5cm Transverse
550 N/5cm 6. Puncture Resistance – Static 1.4 Dynamic 1.3 7. Water
absorption - < 0.15% 8. Water permeability - Nil 9. Chemical resistance –
Chloride, sulphate and Nitrate The area to be water proofed shall be free from
loose aggregate, dust free and in dry condition. Primer must be applied to the
surface and allowed to dry prior to application of membrane. The membrane
shall be applied within 6 hours after application of primer. The membrane
comes in a roll form shall be unrolled and placed in the correct position where
it has to be torched. Each layer must over lap the next layer by min 10cm at
the adjacent and 15cm at the ends. The heat application through propane gas
torch shall be applied on membrane thus causing melting and subsequent
adhesion in the surface. The membrane should be properly placed and torched
on in staggered position.

38.2 For roof slab & terraces Providing & applying water proofing to roof slab, Sqm
terraces, landscape area, podium etc., using modified polyurethane cures
(conforming to ASTM C836-84) to give a tough elastomeric waterproof
membrane on the surface. The surface shall be cleaned free from dust and
other particle before usage. standards & methodology : This compound has a
medium viscosity grade with 620% of elongation and shall be done either by
roller application/brush application/ spray. This will be applied for a thickness of
1.3mm first layer 0.5mm & 2nd layer 0.8mm. After applying the 2nd layer sand
sprinkle shall be done to provide mechanical key.
38.3 ISOPROOF SEALER Providing waterproof treatment to roof slab using 2 coats Sqm
of acrylic co polymer elastomeric ISOPROOF sealer & protector. The surface
shall be prepared free of tar, dust, fungus, loose particles etc.,The surface shall
be applied with basecoat of crystallization liquid and then ISOPROOF, wetting
agent and liquid (1:1:6) over the prepared surface. In addition the surface shall
be provided with polysulphide/ acrylic sealant to V groves, making haunch at
junction of parapet and roof slab and at damaged portion using patching
mortar to drain off rain water. Over this one coat of flexible cementatious
membrane (FCM), Spreading 2 layers of 40 gsm non woven geotextile
membrane as reinforcing material (over FCM) with one primer coat of
ISOPROOF & applying second coat of ISOPROOF liquid over the primer coat -
conforming to ASTM D 412 - 1992. The work shall be carried out as per the
directions of the Engineer in charge. standards & methodology : 1. surface
Preparation The surface shall be made free from all dirt, fungus, loose particles
by using wire brush. The surface shall be cleaned with solvent like xylene,
Toluene, Benzene, dilute hydro chloric acid. i) Cutting of ‘V’-Grooves : The V
shaped grooves shall be cut along the location of all the visible cracks. The ‘V’-
Grooves shall be of size 5mm as directed by the Engineer in charge. 2.
Primary reduction of water permeability The concentrated crystallization liquid
of specific gravity 1.09 is lightly diluted and applied on the prepared surface.
The sodium acetate formed during the chemical reaction penetrates inside the
pores of the concrete and reacts with water to form crystals to block the pores
of the concrete, there by reducing water permeability. 3. Porosity and voids
reduction (base Coat application) Applying wetting agent consisting of acrylic
monomer, co-polymer liquid and crystallization liquid as base on the prepared
surface and V groove and cracks etc. 4. application of sealant / Patching
mortar Cracks will be sealed using suitable sealant or patching mortar. These
make them ideally suited for joint treatment. Its adhesion is very strong & binds
with the building materials such as concrete, and take care of expansion and
contraction in the structures. 5. levelling course using Flexible Cementatious
material A concrete mix in the ratio 1:1.5:3 (1:cement : 1.5 quartz powder : 3
graded stone) is laid to make haunch at junction of parapet and roof slab and
at damaged portions to drain off water. The factory made dry CEMENTATIOUS
silica sand power consisting of dry cement mortar (1 cement : 4 silica sand)
shall be mixed with additives like ISOPROOF chemical and acrylic polymer
and water to arrive at workable consistency. The same shall be applied over
the prepared surface to give even surface and act as base for geo- textile
38.4 Atotic Polyproyelene Providing and laying Water proofing with single layer of Sqm
3mm thick granule finish @ 4.5kg/sqm using Atotic Polypropylene membranes
(APP) with overlap of 100mm at every joints including applying bitumen
emulsion priming coat over the dry surface, including scarifying the surface
and removing dust and foreign materials removing debris and cleaning surface
with wire brush to give even surface. The work shall be carried out as per the
instructions of Engineer in charge of the work.
38.5 Admixture for concrete mix Concrete structures including water retaining kgs
structures Providing admixture to concrete mix using INTEGRAL CRYSTALINE
admixture. Integral Crystalline Admixture shall be added @0.8% by weight of
cement to the ready mix concrete / concrete at the time of batching conforming
to ASTM C 1202 & DIN V 18998. methodology : mixing: Admixture must be
added to the concrete at the time of batching at 0.8% by weight of cement. The
sequence of procedures for addition will vary according to the type of batch
plant operation and equipment: addition of admixture to rmC transit mixer /
Concrete mixer: Mix Admixture with water to form a very thin slurry 1 powder :
1.26 liters of water (e.g. 18 kg of powder mixed with 22.7 liters of water). Pour
this material into the drum of the ready-mix truck/ concrete mixer. The
aggregate, cement and water should be batched and mixed in the plant in
accordance with standard practices (taking into account the quantity of water
that has already been placed in the ready-mix truck). Mix for at least 5 minutes
to ensure even distribution of the Admixture throughout the concrete. addition
of admixture to the batching Plant: Add Admix to the coarse aggregates and
sand, then mix thoroughly for 2 – 3 minutes before adding the cement and
water. The total concrete mass should be blended using standard practices. In
case of a fully automated Batching plant, the Admix shall be poured in the dry
form (in the required pre- measured quantity) to the coarse aggregates and
sand while the same is being fed to the batching plant through the conveyor
belt. Note: It is important to obtain a homogeneous mixture of Admixture with
the concrete. Therefore, do not add dry Admixture powder directly to wet
concrete as this may cause clumping and thorough dispersion will not occur.
STORAGE: Admixture must be stored dry at a temperature of 25 degrees. A
secured covered storage space shall be provided in the close vicinity of the
batching plant.

38.6 For Construction joints Providing pressure grouting for construction joints with Point
cement grout mixed with plasticised expanding grout admixtureat 225
grams/bag of cement conforming to BS:8110 part 1 - 1985, Section 8,9,4.6.
methodology: The admixture, cement and water shall be added in the ratio of
225 gram/bag of cement /21 ltrs of water. This shall be applied to concrete
joints at a pressure of 2 to 4 kg/cm2 by using pumping equipments. The
admixture shall confirm to ASTM C827 and shall have unrestrained expansion
upto 4%

38.7 Water retaining Structures Providing & applying water proofing to concrete Sqm
surfaces using crystalline capillary water proofing system at 1 kg per sqm for
concrete surfaces (confirming to ASTM D 4060, D4541) followed by application
of 2 coats of 1mm thick acrylic polymer based cementatious coating. This
crystalline water proofing compound in powder form shall be mixed with water
at 3:1 ratio (3 powder : 1 water) at the time of application. methodology: The
surface shall be pre damped with water. The water shall be mixed powder in
the ratio of 3 powder :1water mixing thoroughly with a slow speed drill fitted at
a speed RPM of 282640. The final crystalline slurry shall be applied with a soft
brush bloom at average of 1 kg /sqm area. Curing shall be minimum of 48 hour
by treating the surface by fog spray 3 to 4 time a day. Acrylic / Liquid polymer
compound shall be mixed with water by means of using a slow speed drill
mixer 500 RPM and gradually adding the powder component to the liquid
avoiding lump formation and mixed for 2 to 4 minutes. The slurry shall be
applied using stiff brush in 2 coats that forms 1mm thick. (0.5 mm thick each
coat) Curing shall be minimum of 48 hour by treating the surface by fog spray
3 to 4 time a day. Protection layer such as plastering or concrete screen shall
be applied on the water proof membrane surface.
38.8 COVING Providing and laying 12mm thick coving at the junction of slab and Rmtr
vertical offsets with CM 1:3 admixed with modified styrene butadiene rubber
emulsion (confirming to BS 6319) specially designed for use as a bonding aid
and gauging liquid for cementations system (5 ltrs for 50kg cement).
methodology: Modified styrene butadiene rubber emulsion shall be added to
dry mix of cement mortar of 1:3 (5 ltrs for 1 bag of cement and 3 bags of
cement) mixed thoroughly by adding water 0.35 water cement ratio and
peddling for 2 minutes.

38.9 Swellable rapid expansion water proofing for construction joints in all types of M
concrete works / composite works Providing and water proofing treatment to
construction joints of all types of concrete works using swellable rapid
expansion in water. Water stop capable of expanding 215% in 120 hours,
when immersed potable water Conforming to ASTM D 297 & ASTM D 6
Standard methodology: The water stopper shall be laid as per following steps:
i. Clean the surface sufficiently to receive the water stopper ii. Apply a coat of
primer to the area where water stopper is to be laid placed at an application
rate of 240 running meters per 3.78 Liters of primer (primer is supplied along
with water stopper) iii. Using moderate hand pressure with the heel of the
hand, press a continuous bead of Water Stopper firmly into the position. Make
sure that the product has bonded to the primed area. iv. Peel the protective
backing form the exposed side of the water stop and tightly butt the coil ends
to form a continuous water stop. Do not overlap the water stop. v. Follow
standard concrete pouring procedures here after. The proposed water stopper
shall be used for the following situations: 1. At all the cold construction joints 2.
At the junction of Horizontal Raft and vertical retaining walls 3. At the Junction
of horizontal Roof slab and vertical Parapet walls 4. At all cold construction
joints in Water retaining structures such as water tanks, swimming pools, water
bodies on Podium, roof garden or Flower beds etc. 5. Around the Pipe
penetrations, metal penetrations, any other penetrations, where there is a joint
between two different surfaces – one of the surfaces being Concrete. 6.
Construction joints in the lift Pits

38.10 FOR CRACKS IN ROOFTOP SURFACES Providing Water proofer Capable of

bridging cracks upto 2mm in the Exposed Roof surface using Spray Applied
Liquid Water proffer at the rate of 0.20 ltr/sqm. Primer & chemical mortar shall
be applied before applying this spray liquid water proofer. The area shall be
cleaned by high pressure water jet/wire bush or by mechanical means to make
it free from loose particle, dust dirt etc. methodology : 1. The first part
consisting of grouting the porous slab area with non- shrink cementatious grout
(if required). 2. The second part consisting of treating the cracks and
construction joints by routing-out to a minimum 20mm x 20mm groove and
filling it with a crystalisation Mortar after priming with crystalisation slurry. 3.
The third part consisting of making vata at the interface joint of the slab and
parapet with crystalisation Mortar. 4. The fourth part consisting of sealing all
joints of outlet drains pipe, etc. with crystalisation Mortar. 5. The fifth part
consisting of providing and applying liquid water proofer which can be spray
applied at a coverage of 0.2 lt/ sqmt “to permanently fix non-soluble crystalline
growth throughout the capillary tracts and pores of concrete. It is spray applied
over the entire terrace concrete slab and parapet walls up to 300 mm height
38.10.1 FOR CRACKS IN ROOFTOP SURFACES Providing Water proofer Capable of r mt
bridging cracks upto 2mm in the Exposed Roof surface using Spray Applied
Liquid Water proffer at the rate of 0.20 ltr/sqm. Primer & chemical mortar shall
be applied before applying this spray liquid water proofer. The area shall be
cleaned by high pressure water jet/wire bush or by mechanical means to make
it free from loose particle, dust dirt etc. _ for crack filling

38.10.2 FOR CRACKS IN ROOFTOP SURFACES Providing Water proofer Capable of Sqm
bridging cracks upto 2mm in the Exposed Roof surface using Spray Applied
Liquid Water proffer at the rate of 0.20 ltr/sqm. Primer & chemical mortar shall
be applied before applying this spray liquid water proofer. The area shall be
cleaned by high pressure water jet/wire bush or by mechanical means to make
it free from loose particle, dust dirt etc._ for applying spray

38.11 FOR TOILETS SUNK PORTIONS Providing INTEGRAL CRYSTALINE Sqm

Waterproofing treatment to the sunken portion of Toilets. Using Crystalline
Slurry of approved make @ 1.4kg per SQM in two coats (0.7 kg per sqm per
coat) conforming to ASTM C 1202 & DINV 18998 standards. Methodology: 1.
The first part consisting of grouting the porous slab area with non-shrink
cementatious grout (if required). 2. The second part consisting of treating the
cracks and construction joints by routing-out to a minimum 20mm x 20mm
groove and treating it with crystalisation Mortar. First it is primed with
crystalisation slurry and later filled with crystalisation mortar and later again a
coat of crystalisation slurry. 3. The third part consisting of making required
slopes at the interface joint of the toilet slab and masonry wall with
crystalisation Mortar.. 4. The fourth part consisting of sealing / packing all joints
of outlet pipes, etc. with CRYSTALISATION MORTAR 5. The fifth part
consisting of providing and applying In-depth Crystalline Waterproofing System
@ 1.4 kgs/sqm in 2 coats to permanently fix non-soluble crystalline growth
throughout the capillary tracts and pores of concrete. The In-depth Crystalline
waterproofing Material shall be applied by brushing as per manufacturer’s
specification . on the entire toilet sunken slab and walls.

38.12 SELF CURING COMPOUND FOR CONCRETE SURFACE (WATER/ WAX Sqm
BASED) Providing & applying water based (WB) / wax based low viscosity wax
emulsion curing compound membrane / layer applied in the form of spray over
the concrete surface. The material consists of self curing compound
membrane satisfying ASTM C309-90 standard ensuring a non penetrating
continuous film on the concrete surface covering an area of 4.5 to 5 sqm per ltr
of curing compound and shall be applied with a distance of 45 cms after 5
hours of concreting to get the best results. This item shall be adopted wherever
there is scarcity of water and with prior approval of Superintending Engineer.

38.13 POLYMER BASED Providing & applying high efficiency polymer based curing Sqm
compound membrane / layer applied in the form of spray over the roof surface.
The material consists of self curing compound membrane satisfying greater
curing efficiency when tested to BS 7542 -1992 standard ensuring a non
penetrating continuous film on the concrete surface, covering an area of 3.5 to
5 sqm per liter of curing compound and shall be applied with a distance of 45
cms after 5 hours of concreting to get the best results. The above items shall
be adopted wherever there is scarcity of water and with prior approval of
Superintending Engineer.
38.15.1.1 RBI GRADE-81 Pulverising the local soil in place, spreading with rotavator duly cum
adding the specified quantity of inorganic Compound RBI Grade 81 as
approved by CRRI, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with the road roller at OMC to the
desired density for improving the subgrade & shoulders. (The laboratory CBR
of the compacted soil shall not be less than 10) For soils having WL between
35 & 50, with 1% of inorganic Compound like RBI Grade 81 by weight of Soil.

38.15.1.2 RBI GRADE-81 Pulverising the local soil in place, spreading with rotavator duly cum
adding the specified quantity of inorganic Compound RBI Grade 81 as
approved by CRRI, mixing thoroughly, sprinkling desired quantity of water,
grading with motor grader and compacting with the road roller at OMC to the
desired density for improving the subgrade & shoulders. (The laboratory CBR
of the compacted soil shall not be less than 10) For soils having WL more than
50, with 2% of inorganic Compound like RBI Grade 81 by weight of Soil.

38.15.2.1 RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and mixing cum
80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading with
rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling desired
quantity of water, grading with motor grader and compacting with vibratory
roller at OMC to the desired density for preparing the Base / Sub Base Layer
(The Laboratory CBR of the gravel soil shall not be less that 9%) including cost
of all materials, labour, HOM of Machineries complete as per specification.
With 2% inorganic Compound like RBI GRADE 81 by weight of Soil &
Aggregate Mix Material :

38.15.2.2 RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and mixing cum
80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading with
rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling desired
quantity of water, grading with motor grader and compacting with vibratory
roller at OMC to the desired density for preparing the Base / Sub Base Layer
(The Laboratory CBR of the gravel soil shall not be less that 9%) including cost
of all materials, labour, HOM of Machineries complete as per specification.
With 3% inorganic Compound like RBI GRADE 81 by weight of Soil &
Aggregate Mix Material

38.15.2.3 RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and mixing cum
80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading with
rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling desired
quantity of water, grading with motor grader and compacting with vibratory
roller at OMC to the desired density for preparing the Base / Sub Base Layer
(The Laboratory CBR of the gravel soil shall not be less that 9%) including cost
of all materials, labour, HOM of Machineries complete as per specification.
With 4% inorganic Compound like RBI GRADE 81 by weight of Soil &
Aggregate Mix Material
38.15.2.4 RBI GRADE-81 (Gravel soil & aggregate mix material) Pulverising and mixing cum
80% Gravel Soil and 20% Aggregates (30mm nominal size), spreading with
rotavator duly adding the specified quantity of inorganic Compound RBI
GRADE-81 as specified by IRC: 37-2012, mixing thoroughly, sprinkling desired
quantity of water, grading with motor grader and compacting with vibratory
roller at OMC to the desired density for preparing the Base / Sub Base Layer
(The Laboratory CBR of the gravel soil shall not be less that 9%) including cost
of all materials, labour, HOM of Machineries complete as per specification.
With 5% inorganic Compound like RBI GRADE 81 by weight of Soil &
Aggregate Mix Material:

38.15.3.1 RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material) cum
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI GRADE-81 as
specified by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of
water, grading with motor grader and compacting with vibratory roller at OMC
to the desired density for preparing the Stabilized Base / Sub Base Layer
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 2% inorganic Compound like RBI GRADE 81 by weight of
Coarse & Fine Aggregate Mix Material

38.15.3.2 RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material) cum
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI GRADE-81 as
specified by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of
water, grading with motor grader and compacting with vibratory roller at OMC
to the desired density for preparing the Stabilized Base / Sub Base Layer
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 3% inorganic Compound like RBI GRADE 81 by weight of
Coarse & Fine Aggregate Mix Material

38.15.3.3 RBI GRADE -81 (Coarse Aggregate & Fine Aggregate Mix Material) cum
Pulverising and mixing coarse Aggregates (10mm & down size) and Fine
aggregate (2.36mm & down size) in 1:1 proportion, spreading with rotavator
duly adding the specified quantity of inorganic Compound RBI GRADE-81 as
specified by IRC: 37-2012, mixing thoroughly, sprinkling desired quantity of
water, grading with motor grader and compacting with vibratory roller at OMC
to the desired density for preparing the Stabilized Base / Sub Base Layer
including cost of all materials, labour, HOM of Machineries complete as per
specification. With 4% inorganic Compound like RBI GRADE 81 by weight of
Coarse & Fine Aggregate Mix Material

38.15.4.1 RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the existing cum
worn-out/ damaged road with recycler/milling machine duly adding the
specified quantity of inorganic Compound RBI GRADE-81 as specified by IRC:
37-2012, mixing thoroughly, sprinkling desired quantity of water, grading with
motor grader and compacting with vibratory roller at OMC to the desired
density for preparing the Stabilized Base including cost of all materials, labour,
HOM of Machineries complete as per specification. (RAP-Reclaimed Asphalt
Pavement) With 2% inorganic Compound like RBI GRADE 81 by weight of
Milled Material:
38.15.4.2 RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the existing cum
worn-out/ damaged road with recycler/milling machine duly adding the
specified quantity of inorganic Compound RBI GRADE-81 as specified by IRC:
37-2012, mixing thoroughly, sprinkling desired quantity of water, grading with
motor grader and compacting with vibratory roller at OMC to the desired
density for preparing the Stabilized Base including cost of all materials, labour,
HOM of Machineries complete as per specification. (RAP-Reclaimed Asphalt
Pavement) With 3% inorganic Compound like RBI GRADE 81 by weight of
Milled Material

38.15.4.3 RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the existing cum
worn-out/ damaged road with recycler/milling machine duly adding the
specified quantity of inorganic Compound RBI GRADE-81 as specified by IRC:
37-2012, mixing thoroughly, sprinkling desired quantity of water, grading with
motor grader and compacting with vibratory roller at OMC to the desired
density for preparing the Stabilized Base including cost of all materials, labour,
HOM of Machineries complete as per specification. (RAP-Reclaimed Asphalt
Pavement) With 4% inorganic Compound like RBI GRADE 81 by weight of
Milled Material

38.15.4.4 RBI GRADE -81 - Cold In Place recycling Pulverising and mixing the existing cum
worn-out/ damaged road with recycler/milling machine duly adding the
specified quantity of inorganic Compound RBI GRADE-81 as specified by IRC:
37-2012, mixing thoroughly, sprinkling desired quantity of water, grading with
motor grader and compacting with vibratory roller at OMC to the desired
density for preparing the Stabilized Base including cost of all materials, labour,
HOM of Machineries complete as per specification. (RAP-Reclaimed Asphalt
Pavement) With 5% inorganic Compound like RBI GRADE 81 by weight of
Milled Material:
38.16 RBI GRADE -81 --- Cutting the pothole to regular shape, trimming to provide cum
firm vertical faces, removing all loose materials, cleaning of surface, filling with
a mix of aggregates (40mm downsize) & local soil (except BC Soil) in 1:1
proportion duly adding 2 % of Inorganic compound RBI Grade 81, mixing
thoroughly, compacting & finishing etc., complete in WBM layers for
Pothole/Patch repairs. Methodology and Construction : Stabilization using RBI
Grade 81 (the process of improving the engineering properties of a material by
means of the addition of RBI Grade 81) is subject to the quality of materials
available and the impact of the environment (traffic, climate, etc.) on the
structural design. Stabilization with RBI Grade 81 endeavors to increase the
quality of the project and reduce construction costs by improving the properties
of substandard, readily available material to comply with the relevant
specifications. 1. Materials Soil or Gravel Stabilizer agent, RBI Grade 81
Should be kept under cover and protected from moisture from the time of
purchase to the time of use. If material has been left exposed to environmental
elements, consult a RBI Grade 81 representative. It is preferable to stabilize a
soil with a continuously smooth gradation curve from the maximum particle
size to the smallest particle size with no excess or lack in certain particles. This
will ensure better interlocking capabilities of the soil particles resulting in
increased density and strength of the soil. It is recommended that the soil
material have sufficient fine material (< 2.00 mm) to effectively stabilize the
material with RBI Grade 81. 2. Water Water used should be free from harmful
substances that may affect the setting and hardening process of the stabilizer.
Water that is thought to encourage adverse reactions should be tested for
compatibility with RBI Grade 81. 3. Construction procedures The stabilization
of soil requires the careful programming of several operations: a. Pulverization,
which may require initial scarifying b. Addition of stabilizer c. Thorough mixing
of soil, stabilizer and added water d. Laying, spreading and compacting
e.Curing - (minimum of 7 days curing is necessary) Thus efficient planning of
the side operations is necessary to minimize the time between mixing and
compacting. The periods of working should also be consistent with the climatic
conditions and the capability of the construction equipment or plant, to keep to
a minimum, if any changes in moisture content and delays before compaction.
Therefore moisture control has to be considered throughout the stabilization
process. A good indication of the moisture content is to be found in the wheel
tracks on the uncompacted mixture. If too dry for satisfactory compaction, the
material in the tracks would crumble and crack; if too wet it would be easily
38.17 Soilfix Chemical compound --- Cutting the pothole to regular shape, trimming cum
to provide firm vertical faces, removing all loose materials, cleaning of surface,
filling with a mix of aggregates (40mm downsize) & local soil (except BC Soil)
in 1:1 proportion duly adding 0.5 % of Soilfix Chemical compound, mixing
thoroughly, compacting & finishing etc., complete in WBM layers for
Pothole/Patch repairs. Ref: IRC SP 20 : 2002 : RURAL ROADS MANUAL AND
MORT&H SPECIFICATIONS FOR ROAD AND BRIDGE WORKS ( 4TH
REVISION )
38.18 CLAY HOLLOW BRICKS (Extruded) Providing and constructing thick clay
hollow brick masonry in cement mortar 1:6 using horizontal perforated clay
hollow brick with minimum crushing strength of 35 kg/sqcm including
scaffolding, curing etc., complete as directed at all levels. STANDARDS
Minimum Crushing Strength 35 Kg/Sqcm. U- Value 1.1 W/SqmK. Density 695
Kg /Cum. Water absorption <20 %. Reduces the energy consumption and
hence help to maintain comfortable temperature inside. Natural & Green
Building Product. *Ref: - IS 3952 Guidelines for use of horizontally perforated
clay bricks. Construction Methodology * All concrete surfaces of beams and
columns coming in contact with brick work is to be hacked. * Pre wet the bricks
before construction. * Use cement mortar slurry of 1:2 on the hacked surface to
create a roughened surface for proper bonding. * Use silt free (less than 5%)
sieved clean sand for mortar. * Place the marker course of brick (1st course)
after checking the vertical & horizontal alignment. And also mark the vertical
course up to beam bottom on the column to maintain the equal mortar joints. *
Mix mortar in proportion of 1:6 for 200 & 150 mm thick walls and 1:4 for 100
mm thick walls using Farma box (Equal to 1 cement bag) for measuring sand
and a measuring can to standardize quantum of water to get a consistent mix.
Mix well for uniformity. Mix mortar in small manageable quantities and use it
within ½ an hour. * Mortar joints should be 10 to 12 mm for both vertical and
horizontal joints. The joints should be neatly pointed using an Aluminum
Straight edge. * Give concrete band of 1:2:4 with 8 mm steel (2 Nos.) in a 100
mm thick wall at every 1 meter height. * Adjuster course in concrete 1:2:4
should be laid two in courses below the beam and not above the top most
courses.

38.18.1 _do_ of size 400 x 200 x 200mm Sqm

38.18.2 _do_ of size 400 x 200 x1 50mm Sqm
38.18.3 _do_ of size 400 x 200 x 100mm Sqm
38.19 Dry Lean Concrete (DLC) for Profile correction of existing bituminous road cum
surface before carrying out White Topping Dry Lean Concrete (DLC) M-5 for
Profile correction of existing bituminous road surface before carrying out White
Topping Construction of dry lean cement concrete sub base layer over existing
scarified (to the depth of 25 mm with miller machine includes mobilization,
diesel and operating cost, includes cleaning by air blower/sand blasting/
brooming etc.) bituminous road surface with coarse and fine aggregate
conforming to IS 383, the size of coarse aggregate not exceeding 25mm,
aggregate cement ratio not to exceed 15:1, aggregate gradation after blending
to be as per Table 600-1, cement content not less than 160 kg/cum, optimum
moisture content to be determined during trial length construction, concrete
strength not to be less than 10 Mpa at 7 days, mixed in ready mix concrete
plant or a batching plant (to ensure consistency) transported to site, laid to the
depth of 40 mm - 50 mm with a fixed form paver with electric sensor, having
gang mounted vibrators equally spaced with variable rpm and atleast three
integral steel tubes with 8-10 tonnes vibratory rollers for screeding, levelling,
compaction, finishing and curing, includes lifting/shifting charges of paver, as
per specifications complete, ( cement 160kgs. coarse aggregate= 0.86 cum,
Fine aggregate=0.58cum) MORTH specifications No.601.
38.20.1 White Topping Providing and laying White Topping as per IRC:SP76-2008 over cum
bituminous surface (Existing bituminous surface preparation to be done if
necessary either by milling or levelling course with BM/DBM to correct surface
profile and to be paid separately) with unreinforced M-40 grade pavement
quality concrete (PQC)using polymeric synthetic fibre as per ASTM (1116) such
as polyester / polyethylene / polypropylene at 1.20 kg/cum, mixed in batching
and mixing plant or weigh batcher as per approved mix design to achieve
minimum flexural strength or modulus of rupture of concrete 4.50 MPa at 28
days limiting maximum water cement ratio to 0.40, transported to site, laid with
mechanical paver finisher, spread, vibrated, compacted and finished in a
continuous operation to the lines and grades as per drawing, texture finishing
of surface, spraying two layers of curing compound, curing with water sprayed
on hessian cloth coverd over concrete surface, groove cutting to a depth of 1/3
of the slab depth and of width 3-5 mm as per design (grove cutting to be paid
separately). For thin white topping and ultra thin white topping the groove
cutting shall be 1.25mm x 1.25m grid) including cost of all materal, side from
work, labour and HOM of machineries etc. complete as per specifications. - do
- with unreinforced M40 grade pavement quality concrete using 43 grade OPC
@ 420 kg/cum, coarse aggregate, fine aggregate and admixture confirming to
IS 9130-1999 (R-2004)

38.20.2 White Topping Providing and laying White Topping as per IRC:SP76-2008 over cum
bituminous surface (Existing bituminous surface preparation to be done if
necessary either by milling or levelling course with BM/DBM to correct surface
profile and to be paid separately) with unreinforced M-40 grade pavement
quality concrete (PQC) using polymeric synthetic fibre as per ASTM (1116)
such as polyester / polyethylene / polypropylene at 1.20 kg/cum, mixed in
batching and mixing plant or weigh batcher as per approved mix design to
achieve minimum flexural strength or modulus of rupture of concrete 4.50 MPa
at 28 days limiting maximum water cement ratio to 0.40, transported to site,
laid with mechanical paver finisher, spread, vibrated, compacted and finished
in a continuous operation to the lines and grades as per drawing, texture
finishing of surface, spraying two layers of curing compound, curing with water
sprayed on hessian cloth coverd over concrete surface, groove cutting to a
depth of 1/3 of the slab depth and of width 3-5 mm as per design (grove cutting
to be paid separately). For thin white topping and ultra thin white topping the
groove cutting shall be 1.25mm x 1.25m grid) including cost of all materal, side
from work, labour and HOM of machineries etc. complete as per specifications.
- do - with un-reinforced M-40 grade Pavement Quality Concrete (PQC) using
53 grade OPC at 315 kg/cum and cementitious material ground granulated
blast furnace slag at 105 kg/cum, satisfying IS:12089- 1987(R2004) coarse
aggregate fine aggregate, admixture conforming to IS:9103-1999(R2008)
38.20.3 White Topping Providing and laying White Topping as per IRC:SP76-2008 over cum
bituminous surface (Existing bituminous surface preparation to be done if
necessary either by milling or levelling course with BM/DBM to correct surface
profile and to be paid separately) with unreinforced M-40 grade pavement
quality concrete (PQC)using polymeric synthetic fibre as per ASTM (1116) such
as polyester / polyethylene / polypropylene at 1.20 kg/cum, mixed in batching
and mixing plant or weigh batcher as per approved mix design to achieve
minimum flexural strength or modulus of rupture of concrete 4.50 MPa at 28
days limiting maximum water cement ratio to 0.40, transported to site, laid with
mechanical paver finisher, spread, vibrated, compacted and finished in a
continuous operation to the lines and grades as per drawing, texture finishing
of surface, spraying two layers of curing compound, curing with water sprayed
on hessian cloth coverd over concrete surface, groove cutting to a depth of 1/3
of the slab depth and of width 3-5 mm as per design (grove cutting to be paid
separately). For Thin white Topping and ultra thin white topping the groove
cutting shall be 1.25mm x 1.25m grid) including cost of all materal, side from
work, labour and HOM of machineries etc. complete as per specifications. - do
- with un-reinforced M-40 grade pavement quality concrete (PQC) using 53
grade OPC at 357 kg/cum and cementitious material fly ash, at 63 kg/cum,
satisfying IS:3812-2013(Part-1) coarse aggregate fine aggregate, admixture
conforming to IS:9103-1999(R2008)

38.21 Providing groove cutting for width of 4mm - 6mm and 1/3rd depth of PQC M
Whitetopping within 8-10 hrs of placing/finishing of PQC including cost of
cutting machine, generators, HOM of machinery, blades, coolant etc., including
cleaning of groove and providing sand and hot bituminous or equivalent
approved sealant filling etc., including cost of conveyance of all materials,
labour, lead and lift charges and all other incidental charges as per drawing
and as per specifications.Cement Concrete White Topping/Concrete Overlay
as per IRC: SP: 76-2008 White topping is defined as a PCC (Portland Cement
Concrete) overlay constructed on the top of an existing bituminous pavement.
Thus, it is a rehabilitation or structural strengthening alternative on bituminous
pavement. Rutting of pavement is a real problem in a country like India, with
heavy truck loads, operating under frequent start/stop conditions. It is
commonly applied where rutting of bituminous pavements is a recurring
problem, particularly in case of city roads. Concrete over lays offers the
potential for extended service life, increased structural capacity, reduced
maintenance requirements and lower life-cycle costs when compared with
bituminous overlay alternative Concrete overlays have been used on both
bituminous (flexible) pavements since 1918 and existing concrete pavement
since 1913.White topping is classified into three types, based on the thickness
of overlay, types of interface provided i.e., degree of bonding between the
underlying bituminous layers with PCC overlay & thickness of overlay. They
are: i) Conventional White topping – which consists of PCC overlay of
thickness 200 mm or more, which is designed & constructed without
consideration of any bond between existing overlay & underlying bituminous
layer (without assuming any composite action). ii) Thin White topping (TWT) –
which has PCC overlay between 100 – 200 mm. It is designed either
considering bond between overlay & underlying bituminous layer or without
consideration of bond. High strength concrete (M 40 or higher) is normally
used to take care of flexure requirement. Joints are at shorter spacing of 0.6 to
1.25 m. iii) Ultra-Thin White topping (UTWT) – which has PCC overlay of less
than 100 mm. Bonding between overlay & underlying bituminous layer is
mandatory. To ensure this, the existing layer of bitumen is either milled (to a
depth of 25 mm) or surface scrapped (with a non-impact scrapper) or gently
chiselled. Joints are provided at a spacing of 0.6 to 1.25 m. Surface
preparation In case of TWT, bond between PCC overlay & existing bituminous
pavement is atleast partly desirable; in case of UTWT, effective bond is
essential. To ensure this any of the following method can be adopted. - Milling
38.22 Use of GEO Textiles / GEO fabrics in road pavements and subsurface M
drainage works. Providing and Inserting Prefabricated Vertical Drain, core with
synthetic material and wrapped with Non-woven geotextile 120GSM in very
soft clay for quick consolidation. Ref: IRC SP 59 : GUIDELINES FOR USE OF
GEO TEXTILES IN ROAD PAVEMENT S AND ASSOCIATED WORKS- 2002
Technical Data; -do- with 100mm width ,thickness = 4mm,mass per linear
meter 90g/m,with tensile strength =2.0 KN -do –with 100mm width,thickness
=5.2 mm,mass per linear meter 110g/m,with tensile strength = 2.4 KN
Application Methodology; Vertical drains may be installed employing either
vibratory or static methods. In either case, the drain is enclosed in a tubular
steel mandrel of small cross-sectional area usually 50x125mm. A small steel
anchor plate is attached to the drain at the bottom of the mandrel. The mandrel
is then driven in to the soil either with a static or vibratory rig. When the design
depth is reached, the mandrel is extracted. The anchor plate retains the drain
in the soil. When the mandrel is fully extracted the drain is cut off a new anchor
plate is installed and the process begins again. These are used in Land
reclamation projects, Construction of highways ,railways ,airfields and
dykes,Ports and harbor construction, Development of industrial sites
,Mitigation of liquefaction,etc..

38.23 Providing and Laying Needle punched and mechanically bonded Nonwoven
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. Technical Data : _ do_with GSM
150,1.3mm thickness,Grabtensile strength 540N, Puncture strength
315N,Trapezoidal tear 230N,Apparent opening size 180 ?m, _do_200Gsm,1.6
mm thickness,Grabtensile strength 720N,Puncture strength 400N,Trapezoidal
tear 300N,Apparent opening size 150?m _do_250Gsm,1.8 mm thickness,
Grabtensile strength 865N,Puncture strength 525N,Trapezoidal tear
360N,Apparent opening size 150?m _do_300Gsm,1.9 mm thickness,
Grabtensile strength 1010N,Puncture strength 650N,Trapezoidal tear 415N,
Apparent opening size 120?m _do_400GSM,2.5 mm thickness, Grabtensile
strength1325N,Puncture strength 785N,Trapezoidal tear 510N, Apparent
opening size 106?m _do_500GSM,2.9 mm thickness, Grabtensile
strength1570N,Puncture strength 910N,Trapezoidal tear 600N, Apparent
opening size 90?m _ do_ 600GSM,3.4 mm thickness, Grabtensile
strength1980KN,Puncturestrength 1080N, Trapezoidal tear 705N, Apparent
opening size =70?m Application Methodology; These contribute to road
structure strength by providing separation between the base course aggregate
and underlaying, weaker soils, maintaining the structural integrity of the
structure and avoiding the intermixing of the different layers. It also acts as
filter around aggregate drains,it also allows water to flow into the drainage
system while minimizing the passage of fine soil particle that could diminish
drainage capacity. These used in application like Retaining Wall and Steep
sided embankments, Embankment on soft ground, Shallow
foundations,Railway tracks,Confinement ponds, reservoirs and canals.

38.23.1 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -do-with GSM 150,1.3mm
thickness,Grabtensile strength 540N, Puncture strength 315N,Trapezoidal tear
230N,Apparent opening size 180 ?m,
38.23.2 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -do- GSM200G,1.6 mm
thickness,Grabtensile strength 720N,Puncture strength 400N,Trapezoidal tear
300N,Apparent opening size 150?m

38.23.3 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -do-GSM 250,1.8 mm thickness,
Grabtensile strength 865N,Puncture strength 525N,Trapezoidal tear
360N,Apparent opening size 150?m

38.23.4 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -do- GSM 300,1.9 mm thickness,
Grabtensile strength 1010N,Puncture strength 650N,Trapezoidal tear 415N,
Apparent opening size 120?m

38.23.5 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -do-400 GSM,2.5 mm thickness,
Grabtensile strength1325N,Puncture strength 785N,Trapezoidal tear 510N,
Apparent opening size 106?m

38.23.6 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -do- 500GSM ,2.9 mm thickness,
Grabtensile strength1570N,Puncture strength 910N,Trapezoidal tear 600N,
Apparent opening size 90?m

38.23.7 Providing and Laying Needle punched and mechanically bonded Nonwoven Sqm
Geotextile indigenously manufactured from high quality synthetic fibres on the
prepared subgrade for separator cum filtration cum drainage application with
necessary overlaps as per drawing. -600GSM,3.4 mm thickness, Grabtensile
strength1980KN,Puncture strength 1080N, Trapezoidal tear 705N, Apparent
opening size =70?m

38.24 Providing and Laying rope Gabions, indigenously manufactured from high
strength rope for slope protection and erosion control for river bank and sea-
shore protection. Exclusive of providing & filling stones. Technical Data; do -
size 1M x1M x 1M, aperture 150mm x 150mm, Tensile strenth 9500Kg/m,
Punching shear strenth 5200Kg -do - size 1M x1M x 2M, aperture 100mm x
100mm, Tensile strenth 14000Kg/m, Punching shear strenth 6200Kg -do-size
1M x1M x 3M, aperture 100mm x 100mm, Tensile strenth 14000Kg/m,
Punching shear strenth 6200Kg, Application Methodology; Copper and
polymer Gabions are rectangular or cylindrical baskets fabricated from polymer
meshes and usually filled with stone and used for structural purposes such as
retaining walls, revetments, slope protection,and similar applications. These
are fabricated from ropes of suitable diameter into a box like form with required
size and apertures. These are used in application like River bank protection,
revetment, toe-walls,aprons,groynes,spurs,channel linings, sea shore
protection, seawalls, Anti-erosion structures,etc.

38.24.1 _do_ copper and synthetic rope gabion of size 1mx1mx1m, aperture 100mm x Box
100mm
38.24.2 _do_ copper and synthetic rope gabion of size 1mx1mx2m, aperture 100mm x Box
100mm
 38.24.3 _do_ copper and synthetic rope gabion of size 1mx1mx3m, aperture 100mm x Box
100mm
38.25 Providing and Synthetic Biaxial Geogrid indigenously manufactured from
selected high tenacity synthetic yarn with high molecular weight (> 25000
g/mol), and low carboxyl end group (<30mmol/kg) for soil reinforcement
application for stabilisation, requirement of geogrid strength in both direction
with granular fill. Technical Data; -do- ultimate tensile strenth 30Kn/m in MD
and CMD, Tensile strenth at 2% elongation 6Kn/m in MD and 6Kn/m in CD,
aperture size in MD and CD 26X26mm. -do- ultimate tensile strenth 40Kn/m in
MD and CMD, Tensile strenth at 2% elongation 7.5Kn/m in MD and 7.5Kn/m in
CD, aperture size in MD and CD 25X25mm -do- ultimate tensile strenth
60Kn/m in MD and CMD, Tensile strenth at 2% elongation 9Kn/m in MD and
7.5Kn/m in CD, aperture size in MD and CD 25X25mm -do- ultimate tensile
strenth 90Kn/m in MD and CMD, Tensile strenth at 2% elongation 11Kn/m in
MD and 9Kn/m in CD, aperture size in MD and CD 23X23mm Application
Methodology; Biaxial geogrids are designed for applications where strength
requirement is in both directions. They are used in reinforcement of granular
roadbase and subbase, area stabilization, trackbed stabilization, load transfer
platforms,etc.

38.25.1 _do_ with 30 x 30 Kn/m Ultimate Tensile Strength Sqm

38.25.2 _do_ with 40 x 40 Kn/m Ultimate Tensile Strength Sqm
38.25.3 _do_ with 60 x 60 Kn/m Ultimate Tensile Strength Sqm
38.25.4 _do_ with 90 x 90 Kn/m Ultimate Tensile Strength Sqm
38.26 Providing and Synthetic Uniaxial Geogrid, indigenously manufactured from
selected high tenacity synthetic yarn with high molecular weight (> 25000
g/mol), and low carboxyl end group (<30mmol/kg) for reinforced soil wall and
slope application with granular fill as per design prepared by technology
provider of reinforced earth wall and slope. Technical Data: -do- with ultimate
tensile strenth 40Kn/m in MD and 20Kn/m in CMD, aperture size in MD and
CD 30X25mm, -do- with ultimate tensile strenth 60Kn/m in MD and 20Kn/m in
CMD, aperture size in MD and CD 30X25mm, -do-with ultimate tensile strenth
80Kn/m in MD and 30Kn/m in CMD, aperture size in MD and CD 30X25mm,
-do- with ultimate tensile strenth 100Kn/m in MD and 30Kn/m in CMD, aperture
size in MD and CD 30X23mm, -do- with ultimate tensile strenth 120Kn/m in MD
and 30Kn/m in CMD, aperture size in MD and CD 30X23mm, -do- with ultimate
tensile strenth 150Kn/m in MD and 30Kn/m in CMD, aperture size in MD and
CD 30X23mm, -do-with ultimate tensile strenth 200Kn/m in MD and 30Kn/m in
CMD, aperture size in MD and CD 30X22mm, -do- with ultimate tensile strenth
250Kn/m in MD and 30Kn/m in CMD, aperture size in MD and CD 30X20mm,
-do-with ultimate tensile strenth 35Kn/m in MD and 60Kn/m in CMD, Tensile
strenth at 2% elongation 8Kn/m in MD and 9Kn/m in CD, aperture size in MD
and CD 25X25mm -do-with ultimate tensile strenth 40Kn/m in MD and 80Kn/m
in CMD, Tensile strenth at 2% elongation 8Kn/m in MD and 12Kn/m in CD,
Application Methodology: Uniaxial geogrids are available in a range of tensile
strength and are suitable for applications, which require strength in one
direction, these are used in reinforced soil walls,steep slopes and basal
reinforcement of embankments,veneer reinforcement,etc..

38.26.1 _do_ with 40 Kn/m Ultimate Tensile Strength Sqm

38.26.2 _do_ with 60 Kn/m Ultimate Tensile Strength Sqm
Item Unit Basic
Description Rate

38.26.3 _do_ with 80 Kn/m Ultimate Tensile Strength Sqm

38.26.4 _do_ with 100 Kn/m Ultimate Tensile Strength Sqm
38.26.5 _do_ with 120 Kn/m Ultimate Tensile Strength Sqm
38.26.6 _do_ with 150 Kn/m Ultimate Tensile Strength Sqm
38.26.7 _do_ with 200 Kn/m Ultimate Tensile Strength Sqm
38.26.8 _do_ with 250 Kn/m Ultimate Tensile Strength Sqm
38.27 Paving Fabric Providing and Laying Needle punched and mechanically bonded Sqm
Nonwoven Paving Fabric indigenously manufactured from high quality
Synthetic staple fibres having grab tensile strength of 39Kg , and melting point
of 150 °C confirming to ASTM / Morth sec - 700 over a tack coat of paving
grade bitumen 80-100 preparation, laid at the rate of 1 kg per sq.mtr over
thoroughly cleaned and repaired surface to surface with pneumatic roller to
maximize paving fabric contact with pavement surface as per drawing.
Application Methodology: Paving fabric is a strong layer of fabric is applied
under asphalt to minimize surface water infiltration and prevent existing cracks
in the road from surfacing to enhance the performance of pavement. The
Barrier function refers to the prevention of fluid movement across theplane of
the geotextile. A nonwoven geotextile provides a barrier function when
saturated with an impermeable material, like bitumen. It Retards the
propagation of cracks, Reduced the required design overlay thickness,
Extends the life of the overlay and the pavement section,These can be used
as asphalt over lay on flexible pavement a nd rigid pavement –a layer of
DBM/BC should be provided on rigid pavement before laying the paving fabric.

38.28 Metal Gabions Providing and fixing metal Gabions boxes made of
mechanically woven hexagonal shaped wire of type 10x12 cm.Edges
mechanically selvedged made of heavily (Zinc+PVC) coated G.I wires as per
BS;443 mesh wire 3.00 mm Ø edge wire 3.9 mm Ø and filled with 20 to 50kg
weight Trap stones including conveying with all the leads & lifts and placing at
require places in required line,level slope section as directed etc. Application
Methodology: Metal Gabion is comprised double twisted hexagonally woven
steel wire mesh with zinc galvanized and PVC coated compartmented baskets
with a rectangular box shape. The compartments are of equal dimensionand
are formed by internal diaphragms. The compartment is filled with natural
stone at the site of use,to form flexible,permeable,monolithic structures for
earth retension and the diaphragms assure minimum stone migration within
the basket. Thus providing even distribution of the stone even in abnormal
conditions,and adding strength to the container to help retain its rectangular
shape during the filling operation,depending on the application and
requirement,these gabions can be manufactured in different size i.e.length and
width with diaphragm mat every 1.0 m length.These are used in application like
Earth control and soil conservation,Retaining structures/walls,Rock wall
protection netting,Protection of highways/Railways,Barriers at the river,Bridges
and culvert protection,Marine and sea wall protection,Lining of steep slopes or
slopes protection,Revetments for lakes and sea shores ,Lining of canals and
dams,etc.

38.28.1 _do- for Gabion box size of 1x1x1 cum

38.28.2 _do- for Gabion box size of 1.5x1x1 cum
38.28.3 _do- for Gabion box size of 2x1x1/1 diaphragm cum
38.28.4 _do- for Gabion box size of 3x1x1/2 diaphragm cum
38.28.5 _do- for Gabion box size of 4x1x1/3 diaphragm cum
38.28.6 _do- for Gabion box size of 1x1x0.5 cum
38.28.7 _do- for Gabion box size of 1.5x1x0.5 cum
38.28.8 _do- for Gabion box size of 2x1x0.5/1 diaphragm cum
38.28.9 _do- for Gabion box size of 3x1x0.5/2 diaphragm cum
38.28.10 _do- for Gabion box size of 4x1x0.5/3 diaphragm cum
38.29 BORE PACKING for pipe joints Providing & applying high strength non shrink No
free flow grout (confirming to BS 1881-Part 116 : 1983)comprising of blend of
portland cement, graded fillars and chemical additives which impart controlled
expansion in the plastic state duly minimizing water demand. (Minimum 25mm
thickness around the pipe) Standards 1. Compressive strength for 28 days 78
N/sqmm 2. Flowable (Water powder ratio 0.18) 3. Pourable (Water powder
ratio 0.165) 4. Tensile strength for 28 days 3.5 N/ sqmm 5. Flexural strength for
28 days 10 N/ sqmm 6. Unrestrained expansion – 2 to 4 % in the plastic state
Methodology : Non shrink free flow grout shall be added to the water in the
ratio of 25 Kg : 4.125 ltrs of water for pourable condition and for flowable
condition 4.5 ltrs by using heavy duty slow speed grill (400 to 500 RPM) fitted
with the suitable peddle for 5 minutes. To get the best result the mixed grout
should be placed and used in 20 minutes after the mixture.

38.30 PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of Sqm

pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060
mm width (1000 mm cover width), 28-30 mm crest height with crest distance of
200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness
(TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy
coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 20-22 microns
using self drilling/self tapping screws of 25 mm length, to be fixed over the
existing purlins, rafters, channels and trusses.

38.31 Providing and installing of approved make pre painted Galvalume iron Sqm
Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim, etc. The
total coated thickness (TCT) of the sheet shall be 0.47 mm +/- 0.02 tolerance
mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755 -550 mpa steel
grade, 5-7 microns epoxy primer on both side of the sheet and polyester top
coat 20-22 microns using self drilling / self tapping screws of 25 mm length.
(width upto 500-600 mm only), to be fixed over the existing purlins, rafters,
channels and trusses.

38.33 Stone Cleaning _ Cleaning Unpolished granite surface by application of Sqm

Proven, Readily Biodegradable, VOC free, Stabilised, Non-Dilutable, Water
Base & Ready to Use (RTU) liquid chemical formulation with no contact time
restriction over the heavily soiled unpolished granite stone surface using a 30
psi spraying equipment / Roller / Brush spreading & thoroughly wetting the
chemical @ minimum 0.25 ltr to cover 1 sq.mtr on the surface to be treated.
Allow the penetration & chemical reaction time for a minimum of 24 hrs time.
The surface is then low pressure water rinsed with rotary nozzle @ 700 psi
after scrubbing the surface till all the organic & inorganic contamination, dirt,
hydro-carbon soils, algae & rust stains from both the surface & pore of the
substrate is completely removed, the stone is returned to its natural colour &
permeability restored. The formulation being used should be free from
corrosive acids such as Hydrochloric or Muriatic acid, Hydrofluoric acid,
caustics or Sodium Hydroxide, bleach or Sodium Hypochlorite, abrasives and
petroleum distillates. No free Acids or Alkalis to be used.The process should
include all chemical materials, labour, application tools, spraying equipment,
Low pressure washer, safety procedures, hand gloves, face shields, goggles,
protective wear clothing, scaffolding & working platform, lead & lift,
transportation, all incidental charges etc., complete as per the directions of the
Engineer-in-charge of the work.
38.33.1 Stone cleaning using biodegradable liquid solution Cleaning granite surface by Sqm
using aproved quality bio-degradable liquid solution (Ammonium
Hydrogendifloride solution) as per the directions of Engineer incharge of the
works. The cost of works includes cost of materials, HOM of machineries,
labour charges etc. complete. Methodology : 1) The solution to be used shall
be free from hydrofloric acid, muriatic acid, caustic, bleach, abrasive or
petroleum distillates and the neutral pH should be 5.0 to 5.5. 2) The surface is
to be washed first with water pressure of 130psi/ sec, until the deposit of dirt,
hydro carbon soils and algae from the surface and the pores of the surface are
completely removed. 3) Cleaned surface to be dried for 24 hours. 4) Bio-
degradable solution shall be applied over the dry surface. 5) All safety
measures shall be taken during the process of application.

38.34 SLIDING WINDOWS (2 shutters) or equivalent sliding Windows (suitable for

residential and non-residential buildings) Providing and fixing of Sliding
Windows made of Galvanized Steel (BaseSteel as per IS 513, D quality,
galvanized as per IS 277 with Zinc of 120 GSM). The factory made section
should be powder coated with Pure polyester powder upto 50-60 microns thick
with total coated thickness of 0.8 mm for Outer Frame and 0.58mm thickness
for Sliding Shutter Section. The Outer Frame size for Two Tracks with Grill
provision is 90mm x 50mm and without grill provision is of 75mm x 50 mm. The
Window Shutter section is of 58 mm x 36 mm. The Outer Frame should have
Two integrated Guide tracks of 12mm width and 24mm deep for provision to
slide the Shutter / sash frame and facilitates with a water drain outlet
component made of PVC. The Shutter frame should be fitted with 5mm thick
plain float glass of reputed make and fixed with EPDM weathering seal
resistant accessories and handle made of Alumimium 1 No. per each shutter.
The sections are to be cut to length miter joined with corner brackets. The total
window system is to be installed at the site using anchor fasteners, Silicon
sealant applied at the Outer Frame Corners. The cost is inclusive of
conveyance of all materials accessories, labour charges, and erection at site
with complete finished item of work.

38.34.1 Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50 Sqm
mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for
horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS flat.

38.35 SLIDING WINDOWS (3 shutters) or equivalent sliding Windows (suitable for

residential and non-residential buildings):Providing and fixing of Sliding
Windows made of Galvanized Steel (Base Steel as per IS 513, D quality,
galvanized as per IS 277 with Zinc of 120 GSM). The factory made section
should be powder coated with pure polyester powder upto 50-60 microns thick
with total coated thickness of 0.8 mm for Outer Frame and 0.58mm thickness
for Sliding Shutter Section. The Outer Frame size for Two Tracks with Grill
provision is 135mm x 50mm. The Window Shutter section is of 58 mm x 36
mm. The Outer Frame should have Two integrated Guide tracks of 12mm
width and 24mm deep for provision to slide the Shutter / sash frame and
facilitates with a water drain outlet component made of PVC. The Shutter
frame should be fitted with 5mm thick plain float glass of reputed make and
fixed with EPDM weathering seal resistant accessories and handle made of
Alumimium 1 No. per each shutter. The sections are to be cut to length miter
joined with corner brackets. The total window system is to be installed at the
site using anchor fasteners, Silicon sealant applied at the Outer Frame
Corners. The cost is inclusive of conveyance of all materials accessories,
labour charges, and erection at site with complete finished item of work
38.35.1 i) Center Shutter Fixed: center shutter frame made of section with size 36mm x Sqm
58mm should be fitted with 5mm thick plain float glass of reputed make, EPDM
gasket all around the glass and fixed to the Outer Frame with the supporting
section of size 29mm x 20mm of 0.58mm thick fixed horizontally on top and
bottom of the shutter frame
38.35.2 ii) Center Shutter Sliding: center shutter frame made of section of size36mm x Sqm
58mm should be fitted with 5 mm thick plain float glass of reputed make. The
supporting guide section of size 15mm x 19mm of 0.58mm thick fixed
horizontally at top and bottom of shutter frame and slides along the bottom and
top guide tracks made of sections size 24mm x 20mm of 0.58mm thick and
29mm x 20mm of 0.58mm thick.

38.36 Steel Windows with grill and flymesh for residential buildings vProviding and
fixing of windows made of pre-painted steel (base steelas per IS 513 of
0.58mm tick galvanized as per IS 277 with zinc of 120GSM). Primer coated
with epoxy primer of 5-7 microns thick, finishpainted with a polyester paint of
12-16 microns thick and back coatedwith 5-7microns thick alkyd backer.
Section for outer frame should beof 72x55mm, centre mullion should be of
72x50mm, section of the fixed glass beading should be of 12x12mm. and
section of the shutter shouldbe of 48x25mm. Outer frame and mullion sections
to have rebate forglazed shutters, fly mesh and 20mm provision for guard
bars/grill flymesh shutters section should be of 20x40mm. The sections are to
becut to length mitre joined with corner bracket. Centre mullion is to befixed
with mullion cap. Handle latch 2 Nos of heavy duty stainless steelpivot hinges
shall be provided for shutter. The window should be ledwith 50mm thick plain
float glass and S.S. Mesh for fly mesh shutter(304 grade). Rubber gaskets are
to be provided all around the glass. The above frames should be fixed to the
concrete/masonry wall bymeans of self-expanding screws, including 10mm
square guard barswith 6” (152.4mm) pitch complete for finished item of work.

38.36.1 Double shutter window with vertical mullion 3’0”x4’0” (914.4mm x1219.2mm) Sqm
outer frame section size of 72x50mm shutter frame section size of 48x25mm
mullion section size of 72x50mm.
38.36.2 Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x Sqm
1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size
of 48x25mm mullion section size of 72x50mm. Fixed beading section size of
12x12mm
38.37 Steel Windows with grill for residential buildings Providing and fixing of
windows made of pre-painted steel (base steel as per IS 513 of 0.58mm tick
galvanized as per IS 277 with zinc of 120GSM). Primer coated with epoxy
primer of 5-7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7microns thick alkyd backer. Section for
outer frame should be of 48x50mm, centre mullion should be of 48x50mm,
section for shutter should be of 48x25mm and fixed glass beading section
should be of 12x12mm. Outer frame and mullions to have rebate for glazed
shutter and a 20mm provision for guard bars/grills. The sections are to be cut
to length mitre joined with corner bracket. Centre mullion is to be fixed with
mullion cap. Handle stay 2Nos of stainless steel heavy duty pivot hinges shall
be provided for shutter. The window should be panelled with 5mm thick plain
float glass. Rubber gaskets are to be provided all around the glass. The above
frames should be fixed to the concrete/ masonry wall by means of self
expanding screws, including 10mm square guard bars with 6” (152.4mm) pitch
etc., complete for finished item of work.

38.37.1 Double shutter window with vertical mullion 3’0”x4’0” (914.4mm x1219.2mm) Sqm
outer frame section size of 48x50mm shutter frame section size of 48x25mm
mullion section size of 48x50mm.
38.37.2 Centre fixed both side openable shutter window 6’0”x4’0” Sqm
(1828.8mmx1219.2mm). Outer frame section size of 48x50mm shutter frame
section size of 48x25mm mullion section size of 48x50mm. Fixed beading
section size of 12x12mm.
38.38 Pre-painted steel windows / ventilators & door frames: Supply and fixing of
windows and top hung and fixed louered ventilatorsmade of pre-painted steel
(base steel as per IS 513 of -0.58mm thick‘D’ quality, galvanized as per IS 277
with zinc of 120 GSM) with apolyester paint, of 12-16 microns thick and back
coated with 5-7 micronsthick alkyd backer. Section for outer frame should be
46x52mm, sectionfor shutter should be 46x46mm, section for mullion should
be 46x70mm,and section for beading should be 18x25mm and section for
louvered ventilator should be 33x57mm the windows hould be pannaled with 5
mm thick plain float glass and 4mm pinhead glass for ventilators with rubber
Gasket. The sections are to be cut to length, mitre joined with corner bracket
and centre mullions are to be fixed using mullion cap. Handle made of high
grade aluminium powder coated and nylon receiver. Corner brackets made of
CRCA with Zinc Phosphate. Mullion caps made of glass filled nylon. The above
frames should be ixed to the concrete/ masonry will by means of self-
expanding screws. Including 10mm square bars with 6” pitch complete finished
item of work.

38.38.1 WINDOWS : Double shutter 3’-0” X 4’ - 0” (914.4MM x 1219.2 MM) outer frame Sqm
section size of 46x52mm shutter frame section size of 46x46mm.
38.38.2 WINDOWS : Centre fixed both side openable shutter 5’-0” x 4’-0” Sqm
(1524x1219.2mm) outer frame section size of 46x52mm shutter frame section
size of 46x48mm mullion section size of 46x70mm fixed beading section size
of 18x25mm.
38.38.3 Ventilators : Top hung 4’-0” x 3’-0” (1219.2x914.4mm) outer frame section size Sqm
of 46x52mm shutter frame section size of 46x46mm mullion section size of
46x70mm.
38.38.4 Ventilators : Fixed lovers 4’-0” x 3’-0” (1219.2x914.4mm) (Box section) outer Sqm
frame section size of 33x57mm mullion section.
38.39 Road Humps / speed breakers for control of vehicular speeds on roads
Providing road humps for the entire formation width, using bituminous premix
materials and heavy duty cobble stones 60 mm thick, having road hump
dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM
(2 layers) for shoulder portion 1.7mts in length on either side, completing with
road marking paint with applied thermoplastic compound with reflecting glass
beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs
as per IRC SP 67 -2010 (for details refer IRC 99-1988)

38.39.1 For single lane for formation width of 7.50mtrs. and using SDBC mix meterial. Unit

38.39.2 For Intermediate lane for formation width of 9.00mtrs using SDBC mix material. Unit

38.39.3 For 2 lane for formation width of 12mtrs. using SDBC mix material. Unit
38.40 Providing road humps for the entire formation width, using bituminous premix
materials and heavy duty cobble stones 60 mm thick, having road hump
dimension of 1.00 mtr. (width) X 0.15 mtr (height) rectangular sections and
ramp on either side of road hump of 0.85 mtr (wide), including providing WBM
(2 layers) for shoulder portion 1.7mts in length on either side, completing with
road marking paint with applied thermoplastic compound with reflecting glass
beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs
as per IRC SP 67 -2010 (for details refer IRC 99-1988)

38.40.1 For single lane for formation width of 7.50mtrs. and using BC mix meterial. Unit
38.40.2 Intermediate lane for formation width of 9.00mtrs using BC mix material. Unit
38.40.3 2 lane for formation width of 12mtrs. using BC mix material. Unit
38.41.1 Providing, laying, rumble strips, 250 mm wide and 25mm height in rectangular
shape at 1.00 mtr center to center for the entire formation width of road using
pre mix bituminous material, including providing WBM (2 layers) for shoulder
portions, applying tack coat, providing 2 Nos. retro reflective traffic signs as per
IRC SP 67-2010 (for details IRC 99-1988) For 3 nos - including Wbm layers for
length of 2 mtrs on either side of carriage way in shouldr portion.

38.41.1.1 Single lane using SDBC mix material Unit

38.41.1.2 Intermediate lane using SDBC mix material. Unit
38.41.1.3 2 lane using SDBC mix material. Unit
38.41.2 Providing, laying, rumble strips, 250 mm wide and 25mm height in rectangular
shape at 1.00 mtr center to center for the entire formation width of road using
pre mix bituminous material, including providing WBM (2 layers) for shoulder
portions, applying tack coat, providing 2 Nos. retro reflective traffic signs as per
IRC SP 67-2010 (for details IRC 99-1988) For 5 nos - including Wbm layers for
length of 4 mtrs on either side of carriage way in shouldr portion.

38.41.2.1 Single lane using SDBC mix material Unit

38.41.2.2 Intermediate lane using SDBC mix material. Unit
38.41.2.3 2 lane using SDBC mix material. Unit
38.41.3 Providing, laying, rumble strips, 250 mm wide and 25mm height in rectangular
shape at 1.00 mtr center to center for the entire formation width of road using
pre mix bituminous material, including providing WBM (2 layers) for shoulder
portions, applying tack coat, providing 2 Nos. retro reflective traffic signs as per
IRC SP 67-2010 (for details IRC 99-1988) For 10 nos - including Wbm layers
for length of 9mtrs on either side of carriage way in shouldr portion.

38.41.3.1 Single lane using SDBC mix material Unit

38.41.3.2 Intermediate lane using SDBC mix material. Unit
38.41.3.3 2 lane using SDBC mix material. Unit
38.41.4 Providing, laying, rumble strips, 250 mm wide and 25mm height in rectangular
shape at 1.00 mtr center to center for the entire formation width of road using
pre mix bituminous material, including providing WBM (2 layers) for shoulder
portions, applying tack coat, providing 2 Nos. retro reflective traffic signs as per
IRC SP 67-2010 (for details IRC 99-1988) For 15 nos - including Wbm layers
for length of 15 mtrs on either side of carriage way in shouldr portion.

38.41.4.1 Single lane using SDBC mix material Unit

38.41.4.2 Intermediate lane using SDBC mix material. Unit
38.41.4.3 2 lane using SDBC mix material. Unit
38.42 Providing and laying Geocells ultrasonically welded 1.30mm thick, HDPE
strips, expandable to form GEOCELLS of honeycomb structure, anchoring to
metal pegs at each and cell to be laid on prepared surface.
38.42.1 - do - 100mm height Sqm
38.42.2 - do - 150mm height Sqm
38.43 Providing, fabricating and fixing profiled poly erethane insulated roof of 1,06m Sqm
width and 7,60m length sheets roof having external sheet of 0.5mm steel with
powder coated finish, bottom sheet of 0.4mm steel with powder coated finish.
The roofing system shall have water proof over lapping arrangement at the
inter section of two sheets the fasting shall be of self tapping screws dia
6.3mm or required length with PVC head along with washer pre-painted
aluminium cap unit with build in seal arrangements. The entire roof shall be
firmly fasteed to the existing frame

38.44 uPvC Windows and Doors

38.44.1 Providing & fixing of glazed 2 Track-2 Panel Sliding Windows made out of multi Sqm
Chamered uPVC sections with TPV gaskets having Isolated drainage and
reinforced witgh Galvanized iron profiles through out the window. The outer
frame having a overall size of 60x45 mm with reinforcement of 1 mm thickness
and sash with overall size of 39x58 mm with reinforcement of 1.5mm
thickness. Glazing bead for fixing ofglass shall be of size 20x18mm and
coextruded with gasket. Windows shall be provided with 5mm plain float glass,
standard hardware & single point locking system of flush lock, Wall thickness
of frame & sash shall be 2-2.2 mm.

38.44.2 Providing & fixing of glazed Openable Window made out of multi chambered Sqm
uPVC sections with TPV gaskets having isolated drainage and reinforced with
Galvanixed iron profiles throuhout the window. The outer frame having a
overall size of 60x55 mm with reinforcement of 1 mm thickness, mullion with
overall size of 74x60 mm with reinforcement of 1 mm and sash with overall
size of 75x60 mm with reinforcement of 1.5 mm thickness. Glazing bead for
fixing of glass shall be of size 34x20 mm and coextruded with gasket. Windows
shall be provided with 5mm plain float glass, standard hardware & single point
locking system of flush lock, Wall thickness of frame, mullion & sash shall be 2-
2.2 mm.

38.44.3 Providing & of Fixed Louvered Ventilator made out of multi chambered uPVC Sqm
sections with TPv gaskets having isolated drainage and reinforced with
Galvanized Iron profiles through out the windown. The outer frame having a
overall size of 60x55mm with reinforcement of 1 mm thickness and Mullion with
overall size of 74x60mm with reinforcement of 1 mm thickness. Ventilator shall
be provided with 4.5 mm Pin Head glass, standard hardware, Wall thickness of
frame Mullion shall be 2-2.2 mm.

38.44.4 Providing & fixing of Top hung Ventilator With Exhaust Fan Provision made out Sqm
of multi chambered uPVC sections with TPV gaskets having isolated drainage
and reinforced with Galvanized Iron profiles through out the Windown. the
outer frame having a overall size of 60x55 mm with reinforcement of 1 mm
thickness, Mullion with overall size of 74x60 mm with reinforcement of 1 mm
thickness and Sash with overall size of 75x60 mm with reinforcement of 1.5mm
thickness. Glazing bead for fixing of glass shall be of size 34x20 mml
coextruded with gasket, Ventilator shall be provided with 4.5 mm Pin Head
glass, standard hardware, single point locking and friction stays,. Wall
thickness of frame, mullion & sash shall be 2-2.2 mm.

38.44.5 Providing & fixing of glazed 3 Track - 2 Panel Sliding Windown With Mesh Sqm
made out of multi chambered uPVC sections with TPv gaskets having isolated
drainage and reinforced with GI throughtout the window. the sliding outer frame
having a overall size of 108x45 mm with reinforcement of 1 mm thickness,
sash with overall size of 39x58 mm with reinforcement of 1.5 mm thickness,
mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of GI. Glazing
bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket.
Fiber Glass mesh shall be provided in mesh shutter. Windows shall be
provided with 5 mm plain float glass, standard hardware and single point
locking system of flush lock. Wall thickness of frame, mullion & sash shall be 2-
2.2 mm.
38.44.6 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door made out of multi Sqm
chambered uPVC sections with TPV gaskets having isolated drainage and
reinforced with Galvanized Iron profiles through out the window. The sliding
outer frame having a overall size of 60x45 mm with reinforcement of 1 mm
thickness, super sas with overall size of 39x75 mm with reinforcement of
1.5mm thickness. Glazing bead for fixing of glass shall be of size 20x18 mm
and coestruded with gasket. Fiber Glass mesh shall be provided in mesh
shutter. Window/Door shall be provided with 6 mm plain float glass, stgandard
hardware & multi point locking system of patio espagnolette. Wall thickness of
frame, mullion & sash shall be 2-2.2 mm.

38.44.7 Providing & fixing of glazed 3 Track - 2 Panel Sliding Door With Mesh … made Sqm
out of multi chambered uPVC sections with TPV gaskets having isolated
drainage and reinforced with Galvanized Iron profiles through out the window.
The sliding outer frame having a overall size of 108x45 mm with reinforcement
of 1 mm thickness, super sash with overall size of 39x75 mm with
reinforcement of 1.5 mm thickness, mesh sash of overall size 30x48.5 mm
reinforced with 1.5 mm of GI.Glazing bead for fixing of glas shall be of size
20x18mm and coextruded with gasket. Fiber Glass mesh shall be provided in
mesh shutter. Window/Door shall be provided with 6 mm plain float glass,
standard hardware & multi point locking system of Patio espagnolette. Wall
thickness of frame, mullion & sash shall be 2-2.2 mm.

38.44.8 Specification for uPVC Openable window Providing& fixing of Openable Sqm
window made out of multi chambered UPVC(Matching to RAL-9016) sections
and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic
Vulcanized) and lead free with gaskets -grey colour having isolated drainage
and reinforced with Galvanized Iron profile through-out the openable frame.
The frame having overall size of 60mm x 55mm with Gl reinforcement of 1mm
thickness and openable sash with overall size of 6Dmm x 75mm and Gl
reinforcement of 1.5mm thickness. Glazing bead for fixing of glass shall be of
size 2Dmm x 34 mm. Windows shall be provided with 5mm plain float glass,
Standard hardware with friction hing & Multi point locking system with Handle.
Wall thickness of frame & sash shall be of 2mm- 2.5mm. Maximum possible
size- 900mm x 1819mm.
38.45 Consultancy services for Preparation of Land Plan Survey for state Highways Km
and major District roads The entire Land Survey Plan should be carried out
using LiDAR Technology only, Collection of all the relevant information for 50
Mtr on either side from The entire Land Survey Plan should be carried out
using LiDAR Technology only, Collection of all the relevant information for 50
Mtr on either side from centre of the road, Details of Structures (if any), Cross
Drainage Structures, Arboriculture counts and other Assets, which have been
developed as a part of the road furniture / development. Establishing the
Primary Control Points (Horizontal Control), using the DGPS at every 1000
meters interval and secondary control points at every 500 meters and also at
important and salient locations, such as major inter sections, Village / Town
limits etc.,. The DGPS controls will be so established that it meets the
minimum criteria specified for carrying out the mapping activities on a scale of
1:5000 or 1:10000. (Inclusive of all taxes) NOTES: (a) The DGPS control
points established will be further extended using the total station for
densification so that there are Control Points for every 200 m interval at
staggered locations. All Physical details shall be picked up for a width of 50M
from the center line on either side of the road. Primary control points shall be a
properly monumented using Cement Concrete Pillar (RCC) of size 230 mm x
230 mm x 1250 mm, out of which 550 mm is embedded in Cement Concrete
below the ground level. All such Pillars shall be serially numbered and painted
in two coats of Golden Yellow Colour. The X, Y, Z co-ordinates shall be referred
to center of the Pillar marked on top of it. The co-ordinates shall be painted in
red color. A list of all Primary and Secondary control points with X,Y,Z Co-
ordinate should be submitted. Original Revenue Village Survey Maps will be
collected from revenue authorities and all the Control Points shall be physically
verified and marked on top of it. (a. RTC and other information required shall
be collected by the Consultants from the appropriate authorities, b. Within
RoW, if there are any encroachments, then the consultant shall get relevant
records and prepare the relevant documents for transferring RTC in the name
of PWD.) Cadastral (Revenue) Survey will be carried out in order to demarcate
the Right of Way of the road and also of all the encroachments. A statement
shall be prepared showing the extent of Right of Way, Encroachment, including
other assets, Survey Number wise in standard format as approved by PRAMC.
The process carried out should be accurate enough to issue the necessary
notices to the encroachers for getting them cleared. The following documents
in both Hard and Soft Copy (where required) should be furnished : 1. 1:4000
38.46 Providing and fixing self-supported, ribbed, high quality, high grade (D:350
MPA Yst Min ), pre- painted Galvalume steel roof sheet, coated with bare
Galvalume coating AZ 150, @ 150 gms/Smtr 55%AL,45%Zn) by hot dip
process , of total coated thickness as specified for different spans with a
tolerance of +/- 0.02 mm, according to technical specification confirming to A
792, with NCCA ll-1, or ECCA T4 Pencil hardness HB, NCCA standard T-Bend
test. The roof should be fastened to the gutter beam, on the external sloping
side, at an interval of 51mm Centre to Centre, to a depth of 65 mm with GI
anchor bolts and neoprene washers & subjecting the gutter beam to Schmidt,
Hammer test to ensure the anchorage of the anchor bolts. The self-supported
roofing system should be designed to with stand the wind load (As per IS 875
part-3) & Earthquake load (as per IS 1893) & the design should also comply
with any other technical requirements such as turbo ventilators of 0.60 mts. dia
and skylights of size 4.26 x 0.60 mts. fixed one in each row @ 10.00 Mtr C/C
along the length & hangers for electrical fixtures as per the requirements
including cost of all materials &labour for erection, all lead and lift, loading and
unloading, HOM of machineries etc., complete as per the standard detailed
technical specification, design and directions of the engineer in charge of the
work.

38.46.1 (a) Span : 9 Meters upto 15 Meters (b) Material Specification: Colour Coated Sqm
Galvalume Sheet, weighing 10.10 kg/sqm BMT: 0.80 MM, APT : 0.85 MM,
tolerance +/- 0.02mm
38.46.2 a) Span :Above 15 Meters upto 18 Meters (b) Material Specification: Colour Sqm
Coated Galvalume Sheet, weighing 11.35 g/sqm BMT: 0.90 MM, APT : 0.95
MM, tolerance +/- 0.02mm
38.46.3 (a) Span : Above 18 Meters upto 21 Meters (b) Material Specification: Colour Sqm
Coated Galvalume Sheet weighing 12.57kg/sqm BMT: 1.00 MM, APT : 1.05
MM, tolerance +/- 0.02mm
38.46.4 (a) Span : Above 21 Meters upto 23 Meters (b) Material Specification: Colour Sqm
Coated Galvalume Sheet weighing 13.80kg/sqm BMT: 1.10 MM, APT : 1.15
MM, tolerance +/- 0.02mm
38.46.5 (a) Span : Above 23 Meters upto 25 Meters (b) Material Specification: Colour Sqm
Coated Galvalume Sheet, weighing 15.16kg/sqm BMT: 1.20 MM, APT : 1.25
MM, tolerance +/- 0.02mm
38.46.6 (a) Span : Above 25 Meters upto 27 Meters (b) Material Specification: Colour Sqm
Coated Imported Galvalume Sheet, weighing 16.40 kg/sqm BMT: 1.30 MM,
APT : 1.37 MM, tolerance +/- 0.02mm
38.46.7 (a) Span :Above 27 Meters upto 30 Meters (b) Material Specification: Colour Sqm
Coated Imported Galvalume Sheet, weighing 17.63 kg/sqm BMT: 1.40 MM,
APT : 1.47 MM, tolerance +/- 0.02mm
38.46.8 (a) Span :Above 30 Meters upto 32 Meters (b) Material Specification: Colour Sqm
Coated Imported Galvalume Sheet, weighing 18.87 kg/sqm BMT: 1.50 MM,
APT : 1.57 MM, tolerance +/- 0.02mm
38.46.9 (a) Span : Above 32 Meters upto 35 Meters (b) Material Specification: Colour Sqm
Coated Imported Galvalume Sheet, weighing 20.10kg/sqm BMT: 1.60 MM,
APT : 1.67 MM, tolerance +/- 0.02mm
38.47 Providing and applying a heat reflecting anti-fungal water based, flexible, water
proofing, roof coating for use on Roof/Terrace/Parapet. by formulating the
undercoat with polymer modified cementations water proof slurry mortar and
top coat consisting of 100% Acrylic Elastometric Ploymers embedded with heat
reflecting particles. For surfaces having cracks less than 5mm.

38.47.1 do: - in high rainfall areas(Two layers of under coat plus two layers of top coat) Sqm

38.47.2 do: - in low rainfall areas(One layers of under coat plus two layers of top coat) Sqm

38.48 Construction of embankment / sub grade using nanotechnology based

chemical stabilizer and Cement.
38.48.1 Construction of embankment using nanotechnology material. Construction of cum
embankment with approved material gravel/murrum and chemical stabilized
like nanotechnology based organosilane or equivalent (confirming to the
required spec.) mixed in water @0.5kg/ cum (for soil CBR above 5%) and 1%
cement by weight of soil, with all lifts and leads, transporting to site, spreading,
grading to required slope and compacting to meet requirement table 300-2
complete as per specifications. (Which includes cost of gravel/murrum,
watering charges & compacting by vibratory roller) MORTH Specification No.
305

38.48.2 Construction of embankment with material deposited from roadway cutting cum
using nanotechnology material. Construction of Embankment with approved
material deposited at site from roadway cutting and excavation from drain and
foundation of other structures graded and chemical stabilizer like
nanotechnology based organolilane or equivalent (confirming to the required
spec.) Mixed in water @ 0.5kg/ cum and 1% cement by weight of soil and
compacted to meet requirement of table 300-2 complete as per specifications.
(Which includes, watering charges & compacting by vibratory roller) MORTH
Specification No. 305
38.48.3 Construction of subgrade and earthen shoulders using nanotechnology cum
material: Construction of sub-grade and earthen shoulders with approved
material gravel/murrum and chemical stabilizer like nanotechnology based
organosilane or equivalent (confirming to the required spec.) Mixed in water @
0.5kg/cum (for soil CBR above 5%) and 1% cement by weight of soil with all
lifts & leads, transporting to site, spreading, grading to required slope and
compacted to meet requirement of table no. 300-2 complete as per
specifications (Including cost of earth, watering charges & compaction by
vibratory roller) MORTH Specification No. 305

38.48.4 Loosening of the ground upto a level of 500mm below the subgrade level, cum
watered, graded and compacted in layers to meet requirement of table 300-2
for subgrade construction complete as per specifications. Case-I : Compacting
original ground supporting subgrade using chemical stabilizer like
nanotechnology based organosilane or equivalent (confirming to the required
spec.) mixed in water @ 0.5kg/cum and 1% cement by weight of soil, (which
includes water charges & compaction by vibratory roller). MORTH Specification
No. 305.3.4

38.48.5 Loosening, levelling and compacting original ground supporting embankment cum
to facilitate placement of first layer of embankment, scarified to a depth of
150mm, mixed with water at OMC and then compacted by rolling so as to
achieve minimum dry density as given in table 300-2 for embankment
construction. Compete as per specifications. Case – II : Compacting original
ground supporting embankment using chemical stabilizer like nanotechnology
based organosilane or equivalent (confirming to the required spec.) mixed in
water @0.5kg/cum and 1% cement by weight of soil (which includes watering
charges & compaction by vibratory roller) MORTH Specification No. 305.3.4

38.49 METALIC DOOR FRAMES

38.49.1 Door Frame - Entrance : Providing & fixing factory made Galvanized plain steel RMt
door frame of profile size 125 x 60 mm single rebate manufactured from
galvanized plain steel sheet 1.25 mm thick, conforming to IS:277. The door
frame consists of hinge jamb, lock jamb, head & bottom tie bars, supply in
knockdown condition & to be assembled at site by mechanical means with
special mitre joint. The bottom tie bar made out of galvanized plain steel sheet
1.60 mm thick pressed angle 20 x 20 mm screwed to the door frame. The
stiffeners of 3 mm thick pre- punched & pre-trapped are to be welded inside
the pre-punched slots of the door frames & 4 nos. of S.S. butt hinges 100 x 59
x 2.5 mm to be screwed to the door frame. The necessary stiffeners & mortar
guards to be provided for fixing hardware fixtures. The door frame to be
powder coated after pre- treatment of the surface. The door frame shall be
filled with 1:3:6 cement concrete & to be fixed with adjustable lugs/ hold fasts.
Alternatively, dry fixing shall be permitted by using metallic expansion bolt. The
rate is including transportation, loading, unloading, HOM etc. but excluding the
hardware fixtures. size 1000 x 2130 mm
38.49.2 Door Frame - Internal: Providing & fixing factory made Galvanized plain steel RMt
door frame of profile size 125 x 60 mm single rebate manufactured from
galvanized plain steel sheet 1.25 mm thick, conforming to IS: 277. The door
frame consists of hinge jamb, lock jamb, head & bottom tie bars, supply in
knockdown condition & to be assembled on site by mechanical means with the
special miter joint. The bottom tie bar made out of galvanized plain steel sheet
1.60 mm thick pressed angle 20 x 20 mm to be screwed to the door frame. The
4 nos. of G.I. Lift off hinge 100 x 67 x 2 mm to be projected welded to the door
frame. The necessary stiffeners & mortar guards to be provided for fixing
hardware fixtures. The door frame to be powder coated after pre-treatment of
the surface. The door frame shall be filled with 1:3:6 cement concrete & to be
fixed with adjustable lugs/ hold fasts. Alternatively, dry fixing shall be permitted
by using metallic expansion bolt. The rate is including transportation, loading,
unloading, HOM etc. but excluding the hardware fixtures. size 900 x 2130 mm

38.49.3 Door Frame – Wet areas – W.C. / bath: Providing & fixing factory made RMt
Aluminium Zinc coated steel door frame of profile size 105 x 60 mm single
rebate manufactured from Aluminium Zinc metallic coated steel sheet 1.20 mm
thick, conforming to IS: 15961. The door frame consists of hinge jamb, lock
jamb, head & bottom tie bars & supply in knockdown condition & to be
assembled on site by mechanical means with special mitre joint to be bottom
tie bar made out of galvanized plain steel sheet 1.60 mm thick pressed angle
20 x 20 mm to be screwed to the door frame. The 3 nos. of S.S. butt hinges
100 x 58 x 1.9 mm to be projection welded to the door frame. The necessary
stiffeners & mortar guards to be provided for fixing hardware fixtures. The door
frame to be powder coated after pre-treatment of the surface. The door frame
shall be filled with 1:3:6 cement concrete & to be fixed with adjustable lugs/
hold fasts. Alternatively dry fixing shall be permitted by using metallic
expansion bolt. The rate is including transportation, loading, unloading, HOM
etc. but excluding the hardware fixtures. size 750 x 2130 mm

38.49.4 Door Frame – Wet areas – W.C. / Bath: Do- with Profile Size 90 x 50 mm - size RMt
750 x 2130 mm
38.50 METALIC DOOR SHUTTERS
38.50.1 Door Shutters Entrance : Providing & fixing factory made Galvanized steel Sqm
door Shutters 32 mm thick manufactured from pre- painted Galvanized plain
steel sheet 0.60 mm thick conforming to the IS: 14246. The door shutters
consist of two outer skins if steel sheets, lock seam jointed at vertical stile
edges, horizontal top & bottom sides to form a double skin fully flush shell.
Rigid polyurethane Foam (PUF) of density 40 Kg/M3 shall be filled in the
hollow portion of door shutters for structure rigidly & sound insulation. The
necessary stiffeners of the Galvanized plain steel sheet of minimum thickness
1.60 mm to be provided for fixing all hardware fixtures. The rate is including
transportation, loading, unloading, HOM etc. but excluding the hardware
fixtures. size – 900 x 2035 x 32 mm thick.

38.50.2 Door shutters - internal - Do - of Size – 800 x 2035 x 32 mm thick. Sqm

38.50.3 Door shutters - Wet areas – W.C. / bath : Providing & fixing factory made Sqm
Galvanized steel door Shutters 32 mm thick manufactured from pre- painted
Aluminium-zinc metallic coated steel sheet 0.60 mm thick conforming to the IS:
15961. The door shutters consist of two outer skins of steel sheets, lock seam
jointed at vertical stile edges, horizontal top & bottom sides to form a double
skin fully flush shell. Rigid polyurethane Foam (PUF) of density 40 Kg/M3 shall
be filled in the hollow portion of door shutters for structure rigidly & sound
insulation. The necessary stiffeners of Galvanized plain steel sheet of minimum
thickness 1.60 mm to be provided for all hardware fixtures. The rate is
including transportation, loading, unloading, HOM etc. but excluding the
hardware fixtures. size – 650 x 2035 x 32 mm thick.

38.50.4 Door shutters - Wet areas – W.C. / bath : Providing & fixing factory made Sqm
Galvanized steel door Shutters 32 mm thick manufactured from pre- painted
Aluminium-zinc metallic coated steel sheet 0.60 mm thick conforming to the IS:
15961. The door shutters consists of two outer skins of steel sheets, lock seam
jointed at vertical stile edges, horizontal top & bottom sides to form a double
skin fully flush shell. Rigid polyurethane Foam (PUF) of density 40 Kg/M3 shall
be filled in the hollow portion of door shutters for structure rigidly & sound
insulation. The necessary stiffeners of Galvanized plain steel sheet of minimum
thickness 1.60 mm to be provided for all hardware fixtures. The rate is
including transportation, loading, unloading, HOM etc. but excluding the
hardware fixtures. size – 670 x 2045 x 32 mm thick.

38.52 Providing Stainless steel reinforcement (Duplex Grade - 532101) for RCC work Tonne
including straightening, cutting, bending, hooking, placing in position, lapping
and / or welding wherever required, tying with binding wire and anchoring to
the adjoining members wherever necessary complete as per design (laps,
hooks and wastage shall not be measured and paid) cost of materials, labour,
HOM of machinery complete as per specifications.

38.53 Providing and mixing Alkali resistant integral glass fibers HD 67/36 to act as a cum
replacement of steel reinforcement in supported slabs and to provide
secondary reinforcement in concrete at 5 kg / cum of concrete, fibers of length
36 mm, diameter 19 microns,specific gravity 2.68, modulus of elasticity 72 Gpa
and having the aspect ratio (length/dia) of 67, including cost of labour,materials
and HOM of machineries etc complete.(Note:The work to be carried out with
prior permission of the competent authourity.) ( NOTE: Rate is for cum of
concrete)

38.54 Providing and applying 2 coats of corrosion Inhibition cement slurry on Tonne
Reinforcement bars prepared by mixing of 1 Kg of OPC with 500 CC of
Inhibitor solution of approved quality by dipping or brushing method,the first
coat being applied after cleaning the bars by wire brush or alkaline cleaning
powder to remove the rust and dust, and allowed to air dry for 12-24 hours as
the case may be and the second coat being applied on the fabricated bars
before placing in positionas per clause 5.3.3 of IS 9077-1979. The Rate
includes cost and conveyance of all materials, labour charges etc., complete
as per the direction of Engineer in-charge.
38.55 Providing and laying self-compacting controlled concrete produced by IS 9001 cum
accredited plants conforming to EN 206-1 M-20 grade, with OPC @ 185
kg/cum conforming to EN-197-1 GGBS 175 kg/cum, 20 mm to 12.50 mm
graded coarse aggregates@ 865 kg/cum, conforming to EN-12620 obtained
from a single source with a ceiling flakiness index of 5% , M-sand @ 1015
kg/cum, having aggregate particles finer than 45 microns, limited to 8% (2% for
natural sand) and water cement ratio as per EN 1008, with vertical free fall
distance and horizontal flow for concrete from point of discharge limited to 5m
& 1Omts respectively including cost of all materials, labour charges,
scaffolding, curing, hire charges of machineries etc., complete as per the
direction of Engineer-in-charge of work.

38.56 Providing and laying self-compacting controlled concrete produced by IS 9001 cum
accredited plants conforming to EN 206-1 M-25 grade, with OPC@ 255kg/cum
conforming to EN-197-1 GGBS 145 kg/cum, 12.5mm graded coarse
aggregates 745kg/cum, conforming to EN-12620 obtained from a single source
with a ceiling flakiness index of 5%, M-sand@ 1065 kg/ cum, having aggregate
particles finer than 45 microns, limited to 8% (2% for natural sand) and water
cement ratio as per EN 1008, with vertical free fall distance and horizontal flow
for concrete from point of discharge limited to 5m & 1Omts respectively
including cost of all materials, labour charges, scaffolding, curing, hire charges
of machineries etc., complete as per the direction of Engineer-in-charge of
work.

38.57 Providing and laying self-compacting controlled concrete produced by IS 9001 cum
accredited plants conforming to EN 206-1 M-30grade, with OPC@ 275kg/cum
conforming to EN-197-1 GGBS 185 kg/cum, 12.5mm graded coarse
aggregates 790kg/cum, conforming to EN-12620 obtained from a single source
with a ceiling flakiness index of 5%, M-sand@ 990kg/ cum, having aggregate
particles finer than 45 microns, limited to 8% (2% for natural sand) and water
cement ratio as per EN 1008, with vertical free fall distance and horizontal flow
for concrete from point of discharge limited to 5m & 1Omts respectively
including cost of all materials, labour charges, scaffolding, curing, hire charges
of machineries etc. , complete as per the direction of Engineer-in-charge of
work.

38.58 Providing and laying self-compacting controlled concrete produced by IS 9001 cum
accredited plants conforming to EN 206-1 M-35 grade, with OPC@ 305kg/cum
conforming to EN-197-1 GGBS 195 kg/cum, 12.5mm graded coarse
aggregates 800kg/cum, conforming to EN-12620 obtained from a single source
with a ceiling flakiness index of 5%, M-sand @ 970kg/ cum, having aggregate
particles finer than 45 microns, limited to 8% (2% for natural sand) and water
cement ratio as per EN 1008, with vertical free fall distance and horizontal flow
for concrete from point of discharge limited to 5m & 1Omts respectively
including cost of all materials, labour charges, scaffolding, curing, hire charges
of machineries etc., complete as per the direction of Engineer-in-charge of
work.

38.59 Providing and laying self-compacting controlled concrete produced by IS 9001 cum
accredited plants conforming to EN 206-1 M-40 grade, with OPC@ 400kg/cum
conforming to EN-197-1 GGBS 105 kg/cum, 12.5mm graded coarse
aggregates 91Okg/cum, conforming to EN-12620 obtained from a single
source within a ceiling flakiness index of 5%, M-sand@ 820 kg/cum, having
aggregate particles finer than 45 microns, limited to 8% (2% for natural sand)
and water cement ratio as per EN 1008, with vertical free fall distance and
horizontal flow for concrete from point of discharge limited to 5m & 1Omts
respectively including cost of all materials, labour charges, scaffolding, curing,
hire charges of machineries etc., complete as per the direction of Engineer-in-
charge of work.
38.60 Light gauge steel frame structure (LGSFS) for drywall panel system Providing Kg
and fixing factory finished custom designed structurally stable, corrosion
resistant, cold formed wall structure, trusses, joists, purlins, connection
accessories etc , made out of 0.95 mm thick galvanized steel coils, (AZ- 150
gms, Aluminium-Zinc alloy coated steel) having minimum yield strength of 550
M pa, using computerized cold forming machine to 'C' type sections having a
minimum web thickness of 89 mm, flange width 40 mm with 10mm lip as per
drawings conforming to AISI specifications and IBC 2009 for cold formed steel
and construction confirming to Indian standards as per IS 800-1984, IS 801-
1975, IS 875- 1987(Part Ill) and IS 1893, the LGS frames shall be
manufactured using computerized machine duly punched with dimple, service
holes and slots at required location and supplied in assembled state using self
tapping screws with corrosion resistant coating in accordance with ASTM 8633
of specified pitch as per requirements or in a dismantled state , and mounted
/firmly fixed to the existing plinth beam using self expandable carbon steel
anchor bolts, 12 mm dia and 121 mm in length conforming to AISI304 & 306
standards@ 500 mm c/c with a minimum embedment of 100 mm in RCC
located at 300 mm from corners or from bottom LGS frames confirming to
Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per
the directions of the engineer in charge of the work.

38.61 Providing and fixing with internal and external cement fibre boards/ coir Sqm
composite boards to LGSFS Dry wall panel system Providing and fixing for
both external and internal faces of Light Gauge Steel Frame Structure in two
layers, sandwiching a breathable vapour barrier in between layers as per NBC
code 2009, with external face having a 6mm thick heavy duty fiber cement
board/coir composite board fixed on a 9mm thick heavy duty fiber cement
board/coir composite board confirming to IS 148622000, Category IV type A or
equivalent in standard sizes and internal face with 12.5rnm thick gypsurn
plaster board/coir composite board fixed on Bmm thick fiber cement board/coir
composite boards confirming to IS 14862:2000 of category Ill type B (High
pressure steam cured) or equivalent ,as per standard sizes with self drilling
tapping screws half counter sunk, rib head of 1.60mm to 4rnm thick, 8 to 10
gauge, length varying from 25 to 45mm I fasteners @ 600mm c/c of approved
make, with a staggered vertical joint of 2rnm to 3mm sealed with a silicon
based sealant and smooth finished using fiber mesh tape and Epoxy and
acrylic based joining compound for seamless finish and the material and
process of manufacture and assembly/erection confirming to Specifications
including all costs of labour, materials, fabrication, assembling, transportation,
erection, incidental and unforeseen charges complete as per the directions of
the engineer in charge of the work.
38.62 Providing and fixing with EPS -weld mesh-cement-sand shotcrete wall panels Sqm
to LGSFS. Providing and fixing in position factory made expanded polystyrene
core (EPS core) panels 90 mm thick having a density not less than 10 kg per
cum. to both faces of LGSFS FOR WALLS and covered on both sides with
welded wire fabric mesh made of 2.2mm dia Gl wire with 50mm pitch in both
the directions, connected by Gl wire of 3mm dia to the LGS frame structure
duly plaster finished with shotcrete plastering/ guniting equipment in required
layers, 30mm thick with cement mortar 1:3 {1 cement: 3 coarse sand not
having more than 40% stone chips of size upto 6mm} at a pressure not less
than 1 bar (100 KN/m2) and both faces finished with trowel and completed in
all respect as per drawings and specifications confirming to Specifications
including all costs of labour, materials, fabrication, assembling, transportation,
erection, incidental and unforeseen charges complete as per the directions of
the engineer in charge of the work.

38.63 Providing and fixing with EPS -weld mesh-cement-sand shotcrete roof/floor Sqm
panels to LGSFS Providing and fixing in position factory made expanded
polystyrene core (EPS core) panels 90 mm thick having a density not less than
10 kg per cum. to both faces of LGSFS FOR ROOF/FLOOR PANELS and
covered on both sides with welded wire fabric mesh made of 2.2mm dia Gl
wire with 50mm pitch in both the directions, connected by Gl wire of 3mm dia
to the LGS frame structure duly plaster finished with shotcrete plastering/
guniting equipment in required layers, 30mm thick with cement mortar 1:3 {1
cement: 3 coarse sand not having more than 40% stone chips of size upto
6mm)} at a pressure not less than 1 bar (100 KN/m2) and both faces finished
with trowel and completed in all respect as per drawings and specifications
confirming to Specifications including all costs of labour, materials, fabrication,
assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work.

38.64 COIR COMPOSITE DOORS Engineered Coir Composite Flush Door Shutter Sqm
of 30mm Thick. Providing and fixing engineered coir composite flush door
shutter manufactured using infill solid core with coir and wood particle blended
with high quality polymer encased with 28mm thick wooden styles and rails all-
round the boundary of the shutter and veneer laminated with non oven coir felt
impregnated with high temperature cure phenol formaldehyde resin of density
800kg/cum with high quality adhesive processed at 155 Deg. C, using 650
tonnage hot compression moulding press and all four sides of the door shutter
coated with water resistant coating and whole process of manufacturing
confirming to Specifications including all costs of labour, materials, fabrication,
assembling, transportation, erection, incidental and unforeseen charges
complete as per the directions of the engineer in charge of the work, but
excluding the cost of fixtures and painting.
38.65 COIR COMPOSITE DOORS Engineered wood plastic composite door frames RMt
with cross section of 55 x 110 mm Providing and fixing engineered wood door
frame of requires size fabricated using Wood Plastic Composites profiles
(WPC) of cross section 55 mm X 110 mm with a density of 1250-1300 kg/m3,
resistant to water, termite, fungal and UV, using four numbers of L shaped MS
or plastic clamps at the corners of the frame to fix it firmly to form a rectangular
shape door frame and provided with six numbers of 260mmx25mmx5mm size
z shaped MS flat hold fasts for fixing the door frame in the wall and the
material and process for manufacturing the door frame confirming to
Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per
the directions of the engineer in charge of the work, but excluding the cost of
fixtures and painting.

38.66 COIR COMPOSITE DOORS Engineered wood plastic composite door frames RMt
with cross section of75 x 125 mm Providing and fixing engineered wood door
frame fabricated using Wood Plastic Composites profiles (WPC) of cross
section 75 mm X 125mm with a density of 1250-1300 kg/m3, resistant to water,
termite, fungal and UV, using four numbers of L shaped MS or plastic clamps
at the corners of the frame to fix it firmly to form a rectangular shape door
frame and provided with six numbers of 260mmx25mmx5mm size z shaped
MS flat hold fasts for fixing the door frame in the wall and the material and
process for manufacturing the door frame confirming to Specifications
including all costs of labour, materials, fabrication, assembling, transportation,
erection, incidental and unforeseen charges complete as per the directions of
the engineer in charge of the work, but excluding the cost of fixtures and
painting.

38.67 COIR COMPOSITE DOORS Engineered wood plastic composite window Sqm
frames with cross section of 55 mm x 110 mm Providing and fixing engineered
wood window frame fabricated using Wood Plastic Composites profiles (WPC)
of cross section 55 mm X 11Omm with a density of 1250-1300 kg/m3, resistant
to water, termite, fungal and UV, using four numbers of L shaped MS or plastic
clamps at the corners of the frame to fix it firmly to form a rectangular shape
door frame and provided with six numbers of 260mmx25mmx5mm size z
shaped MS flat hold fasts for fixing the window frame in the wall, MS rods of
12mm dia are provided in window frame as per design and drawings. The
material and process for manufacturing the door frame confirming to
Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per
the directions of the engineer in charge of the work , but excluding the cost of
fixtures and painting.

38.68 Providing and fixing in position half paneled window shutters with wood plastic Sqm
composite styles and rails of 30rnm thick, 65mm wide and with 4mm thick
reeded glass panels fixed in the groves provided in the styles and rails and the
material and process for manufacturing the window shutters confirming to
Specifications including all costs of labour, materials, fabrication, assembling,
transportation, erection, incidental and unforeseen charges complete as per
the directions of the engineer in charge of the work, but excluding the cost of
fixtures and painting.
38.69 Providing and supplying water proofing membrane of size 1m X 5m with 6.4 Sqm
mm thick having a puncture resistance of 620 N as per ASTM D 4833 and
hydrostatic pressure resistance upto 70 m as per ASTM D 5385 consisting of
Bentonite granuals weighing 4.80 kg/sqm encased between needle punched
non-oven geotextile covered with HOPE sheet of 200 microns thick and
uncovered oven geotextile on the other side laid over levelling concrete to
arrest subsurface water with a staggered over lapping of 100 mm and with a
minimum staggered lapping of 300 mm at the corners and the laps secured by
washer headed mechanical fasteners spaced at 300 mm c/c and the lap joints
are sealed with Bento seal of not lessthan 19 mm thick and the terminated
ends of water proofing membrane is covered with aluminium strip and Bento
seal.,complete including the cost of lapping, materials, labour, complete as per
specifications. Ref: ASTM D 4833, ASTM D 5385, ASTM D 3776, ASTM D 903,
ASTM D 5084, ASTM D 4632,ASTM D 1970,ASTM E 96.

38.70 Migrating Corrosion Inhibiting Admixture Providing and applying Corrosion cum
inhibiting admixture at a dose of 3 kgs per cum of concrete. The admixture
should protect both cathodic and anodic sites and should have accredited by
Indian Roads Congress, recommended for use by Ministry of Road Transport
& Highways. Admixture should have evaluated test reports demonstrating a
corrosion rate of zero coulombs after 9 test cycles as per ASTM G 109. PH of
admixture should be alkaline in nature, specific gravity of 0.99 - 1.1, colour:
brownish. The contractor must intimate the engineer in charge prior to addition
in concrete for recording. If the admixture is put in the concrete mix at the
batching plant, a written record of the amount of admixture used shall be
supplied to the engineer. The engineer must ensure that the specified dosage
of admixture is added in the concrete mix.

38.71 High performance Anti carbonation protective coating Providing and applying Sqm
primer and two coats of 100% acrylic breathable, water based, anti-
carbonation coating. Coating to be applied at the rate 300 g/m2. Minimum OFT
of coating to be 225 micron. The coating shall have atleast a 4 year track
record of use as an anti-carbonation coating and shall have the test reports
evaluated from Ministry of New and renewable Resources supported
laboratory demonstrating Solar Reflectance Index (ASTM E 1980-11, EN
673:2011, EN 410:2011) > 104. 1. Carbon dioxide diffusion equivalent air layer
thickness (DIN EN 1062-6) >100m 2. Carbon dioxide diffusion resistance co-
efficient (DIN EN 1062-6) > 7.50X105 3. Elongation of cured film shall be as
per ASTM D 2310/98 > 400% 4. Chloride Ion Diffusion(ASTM C 1202) =Zero
Penetration 5. Adhesion (ASTM D 4541) > 2 N/mm2
38.72 Waterproofing Providing and applying compatible PU based primer+ 2 coats of Sqm
Single component, high solids, cold applied liquid polyurethane elastomer
waterproof membrane over uniform surface of slab. Apply 2 coats at dosage of
1. 5 kgs per sq. mtr total with minimum total WFT (Wet Film Thickness) of
1.5mm to achieve the required minimum OFT of 1.2mm. This should be
followed by application of protective plaster. The manufacturer of the liquid
membrane shall be Dakks ISO 9001:2015 accredited for manufacturing and
design. Liquid applied, polyurethane waterproofing membrane should have
following minimum properties: 1. Water permeability (DIN 1048) - Nil as per
DIN 1048 § 7 bar of hydrostatic pressure 2. Moisture permeability- < 0. 4
g/m2/day 3. Accelerated Weathering (IS 101)- 2000 hrs No cracking or blister
formation. 4. Adhesion to concrete (ASTM D 1000)- >21 Kg/cm2 (Concrete
Fails) 5. Tensile Strength> 2.0 MPa (ASTM 0412) 6. Should not be water
soluble or water dilutable 7. Shore A Hardness -40+5 (ASTM 02240) 8.
Elongation at Break > 600 % (ASTM 0412) 9. Solids> 95% 10. No micro-
bubble formation or blistering should take place during the curing of thick films.
It shall be applied as per manufacturers specification.

38.73 Structural Steel Coatings Cleaning the existing steel surface by mechanical Sqm
means such as sand blasting so as to remove all the existing loose rust etc.
Using cotton waste swab apply rust converting,steel passivating, flash rust
preventing sulphate and chloride free, non-alkaline, inorganic single
component, rust converter and nano film forming surface passivator. After 24
hours remove the free I loose rust particles by simple dusting with brush.
Providing and applying one coat of Two component, anticorrosive, solvent free,
substituted long chain nylon reticulant based epoxy coating/primer This should
be followed by two coats of protective two component, APR based, UV
resistant anticorrosive coating. Apply the coats by brush or spray at 4-6 hours
interval between each coat

38.74 Providing and fixing Sacrificial Anode for damaged RCC Member such as slab, Sqm
beam, column etc Providing and fixing zinc alloy based galvanic disk type
sacrificial anodes (50 mm dia, 18 mm thick) to the reinforcement and pass 500
hours salt spray test as per ASTM B 117, The anode shall be connected to the
reinforcement steel by connectors provided with the anode.

38.75 Coir Textile Supplying and installation of 700 gsm/sqm over sub-grade Sqm
formation as per standard road specification will be laid- wrinkly free using
hooks 150mm "U" shaped and sharp edges at both ends on the periphery of
the geo-textiles on both sides at c/c 2.5 Mtrs. and providing lap width of 100
ems. mixing with "U" shaped hooks at 1.5 ems c/c cost inclusive of
transportation. loading, unloading and labour charges as per directions of
Engineer incharge of the work.
Basic Rate
480.00

700.00
980.00

450.00
360.00

95.00

470.00
147.00

500.00
 95.00

350.00

480.00

17.00

38.00
 680.00

1,263.00

1,763.00

2,349.00

2,936.00
3,520.00

2,049.00

3,717.00

4,498.00

2,636.00
3,248.00

4,029.00

4,810.00
2,775.00

3,450.00
 867.00
680.00
658.00
3,730.00
6,083.00

5,873.00
5,706.00

100.00
90.00

91.00
 94.00

95.00

103.00

109.00

110.00

136.00

1,160.00

2,142.00
3,214.00

125.00
145.00
180.00
220.00

120.00
135.00

155.00
180.00
 205.00
230.00
290.00
330.00
150.00

2,900.00
2,550.00
2,650.00
2,450.00
2,400.00
4,200.00
3,650.00
3,700.00
3,214.00
3,125.00
330.00

770.00

740.00

0.00
 452.00

5,164.00
5,698.00

5,768.00

6,492.00

6,270.00

3,758.00
 4,102.00

3,842.00

3,596.00

3,616.00

3,482.00

33,005.00

39,017.00

50,370.00

36,376.00
40,385.00
52,191.00

18,580.00
18,132.00
22,847.00

26,422.00
21,948.00
33,474.00

45,942.00
44,396.00
60,040.00

65,436.00
63,103.00
86,567.00

362.00
471.00
2,008.00
3,026.00

3,632.00

4,540.00

5,220.00

4,917.00
5,675.00

5,675.00

5,448.00
4,500.00

1,560.00
1,650.00

1,740.00

1,875.00

2,175.00

2,050.00

2,185.00

2,320.00

2,410.00

490.00

437.00

790.00

660.00
794.00

632.00

610.00

545.00
 430.00

477.00

440.00

2,140.00

2,230.00
 2,500.00

0.00

214,452.00

3,100.00

1,670.00
4,824.00

5,235.00

5,600.00

5,910.00

6,185.00
 155.00

2,960.00
2,890.00

3,020.00

2,000.00
 700.00

1,300.00

3,850.00

2,200.00
880.00

340.00

226.00
1,459.00

330.00

892.00

120.00
Item No. Description Unit
39.1 Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame Sqm
work at spacing not exceeding 60Dmm c/c fixed to the wall and top covered
out of 4mm thick approved quality Veneer, fixed over 12mm thick ply of
approved brand, termite and water resistant, finished with melamine polish,
complete including cost and conveyance of all materials, labour for all items of
work HOM etc., complete as per specification.

39.2 Providing and fixing Acoustic Veneer paneling, over the 50mm x 35mm sal Sqm
wood frame work at spacing not exceeding 600mm c/c fixed to the wall filled
with 50mm thick 32kg density glass wool and top covered out of 4mm thick
approved quality Veneer, fixed over 19mm thick ply strips of 1OOmm to
200mm with a gap of 6mm to 1Omm in between strips of approved brand,
termite and water resistant, finished with melamine polish, complete including
cost and conveyance of all materials, labour for all items of work, HOM
complete as per specification.

39.3 Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using Sqm
19mm thick vinyl bonded water proof block board, shutters allround ward robe,
lockable drawers with sliding channels, cupboard drapery hangers, curtain
rods with end brackets, openable shutters with 19mm x 6mm thick plain teak
wood beading, lipping 1.5mm thick commercial ply vertical support finished in
approved 1mm lamination sheet of approved colour, shade and quality on all
exposed surfaces. Inner surface painted with 2 coats of white synthetic enamel
paint over 2 coats of Patti, one coat of wood primer, including cost of brass
fittings, parliamentary hinges, C handles, tower bolts, magnetic catches,
approved brand lock, adhesives, synthetic resins, nails, screws etc., complete
including cost of all materials, labour charges, complete as per specification.

39.4 Providing and fixing storage unit of 0. r5m depth made out of 19mm thick Sqm
commercial ply vertical support finished in approved 1.00mm laminate with
12mm thick ply packing internally finished with enamel paint of approved
colour and shade shelves shall be formed out of 19mm ply finished with
enamel paint of approved shade and colour and 19mm thick shutters formed
out of 19mm thick ply finished with 1.00mm thick laminate of approved shade
and colour etc., complete the rate includes cost of all materials, labour
charges, complete as per specification.

39.5 Providing and fixing Single shutter glass door of 12mm thick plain toughened Sqm
glass. The door is fixed by using any approved make hardware fitting like patch
fitting, pivot, floor machine, locking arrangements and suitable SS door rails
with floral glass etching for 1/3 portion of door area etc complete. The rate
includes cost of all materials, labour, hire of tools & machineries, and as per
specification.

39.6 Providing and fixing Double shutter glass door of 12mm thick plain toughened Sqm
glass of approved make. The door is fixed by using any approved make
hardware fitting like patch fitting, pivot, floor machine, locking arrangements
and suitable SS door rails with floral glass etching for 1/3 portion of door area
etc complete. The rate includes cost of all materials, labour, hire of tools &
machineries, as per the specification.

39.7 Providing and fixing Single shutter glass door of 12mm thick frosted toughened Sqm
glass of approved make. The door is fixed by using any approved make
hardware fitting like patch fitting, pivot floor machine, locking arrangements
and suitable SS door rails with floral glass etching for 113 portion of door area
etc complete. The rate includes cost of all materials, labour, hire of tools &
machineries, as per specification.
 39.8 Providing and fixing Double shutter glass door of 12mm thick frosted Sqm
toughened glass of approved make. The door is fixed by using any approved
make hardware fitting like patch fitting, pivot, floor machine, locking
arrangements and suitable SS door rails with floral glass etching for 113
portion of door area etc complete. The rate includes cost of all materials,
labour, hire of tools & machineries, as per specifications etc complete. The rate
includes cost of all materials, labour, hire of tools & machineries, as per
specifications.

39.9 Providing, fabricating and fixing partition frame work consisting of 50mm x Sqm
50mm sal wood frame work at spacing not exceeding 600mm clc fixed to the
bottom and ceiling, the partition shall be skinned on both sides using 12mm
thick commercial plywood of approved brand termite and water resistance, and
top covered with 4mm thick approved quality veneer finished with melamine
polish, complete including cost and conveyance of all materials, labour for all
items of work, HOM as per specification.

39.10 Removing wall paneling I false ceiling I wooden partition I aluminium partition, Sqm
stacking it with all cost and conveyance labour for all items of work, HOM of
equipment etc., complete as per specification
39.11 Providing and fixing 100mm wide venetian blinds of window fashion fabric of Sqm
Taiwan make, with 50mm thick powder coated channel with balance, imported,
acrylic self alignable mechanism and equally placed spacers, imported tilting
mechanism for easy tilting operation,with nylon imported thread and beadings,
100mm wide imported washable reusable fabric placed with top hanger and
bottom with 1OOmm long bottom plate connected to nylon imported bottom
link chain. The rate is inclusive of drilling holes for fixing channels to the wall,
fixing threads and beadings and link chains, hard ware fixtures etc., complete
as per drawing, specifications.

39.12.1 Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module Sqm
size of 600x600x19mm with Exposed grid. The tiles should have Humidity
Resistance (RH) of 99%, Light Reflectance 87%, Thermal Conductivity k =
0.052 - 0.057 w/m K, NRC -0.7,Colour White, Fire Performance UK A2 S1, dO,
with Anti Microbial coating on the face of the tile, suitable for zone 4 area
according to NF S 90-35:2003 with cleanroom class of ISO 5 (Class 100),
Decontamination Class of CP1Oand Bacteriological Cleanliness Class B1 for
specific strains and reduction in colony size. Washability properties of 500
wash cycles as per ASTM D-4828 and suitable for Green Building application
with Recycled content of 37%. The tile shall be laid on 24mm wide T - section
flanges colour white having rotary stitching on all T sections i.e. the Main
Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a
load carrying capacity of 15 Kgs/Sqm& pull out strength of minimum 100 Kgs.
The T Sections should have a Galvanizing of 90 grams per Sqm and need to
be installed with Suspension system of approved make.

39.12.2 Providing and supplying Acoustical Wall Paneling' with square edges made of Sqm
fibre glass substrate 25mm thick and wrapped on the front side with an
acoustically transparent and classified for Fire reaction Class A, as per ASTM
E-84, fabric with option of colors - as per the choice of the Architect/Engineer
incharge of the size 600x600mm, 600x1200mm & 600x1800mm providing a
minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall
panel lmpalersand construction adhesives as per the instructions laid down by
the certified manufacturer.
39.12.3 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in Sqm
module size of 600 x 600 x 16mm with Exposed Grid. The tiles should have
Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance <o87%,
Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance
UK Class 0 I Class 1 (BS 476 pt- 6 &7)and suitable for Green Building
application with Recycled content of 30%. The tile shall be laid on 24 mm wide
T - section flanges colour white having rotary stitching on all T sections i.e. the
Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and
a load carrying capacity of 15Kgs/sqm&pull out strength of minimum 100 Kgs.
The T Sections should have a Galvanizing of 90 grams per Sqm and need to
be installed with Suspension system of approved make.

39.12.4 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in Sqm
module size of 600 x 600 x 16mm with Exposed Grid. Tiles having Humidity
Resistance (RH) of 99%, NRC 0.5, Light Reflectance ;,83%, Thermal
Conductivity k = 0.052-0.057 w/m K, Colour White, Fire Performance UK Class
0 I Class 1 (BS 476 pt- 6 &7)with sand texture finished Dune and suitable for
Green Building application with Recycled content of 39%. The tile shall be laid
on 24 mm wide T - section flanges colour white having rotary stitching on all T
sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web
height of 38mm and a load carrying capacity of 15Kgs/sqm&pull out strength of
minimum 100 Kgs. The T Sections should have a Galvanizing of 90 grams per
Sqm and need to be installed with Suspension system of approved make.

39.12.5 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in Sqm
module size of 600 x 600 x 16mm with Exposed Grid. Tiles having Humidity
Resistance (RH) of 99%, NRC 0.6, Light Reflectance ;e87%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK
Class 0 I Class 1 (BS 476 pt - 6 &7) & Euroclass A2 S1, dOand suitable for
Green Building application with Recycled content of 50%. The tile shall be laid
on 24 mm wide T - section flanges colour white having rotary stitching on all T
sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web
height of 38mm and a load carrying capacity of 15Kgs/sqm&pull out strength of
minimum 100 Kgs. The T Sections should have a Galvanizing of 90 grams per
Sqm and need to be installed with Suspension system of approved make.

39.13.1 COURT HALL FURNITURE DIAS for Judges: Providing and fixing dias for Sqm
judges in court halls of overall size 3650 x 3050 x 600 mm using 40 x 40 x
2mm slotted angle for frame work at suitable intervals using double angle back
to back wherever necessary with suitable stiffeners for legs including diagonal
members fabricated using nuts and bolts, the top of the dias to be covered with
25mm treated commercial block board of approved make, seated and fastened
properly by bolt and nut to the slotted angle frame work, the sides of the dias
to be covered with 12mm thick novopan sheet fixed firmly to the slotted angle,
including making a parapet aIround the dias to a height of 750mm using the
slotted angle frame work and covered with novopan sheet of 12mm thick for
outside and 4mm thick one side teak plywood for inside of the parapet with
50x25mm sal wood frame work attached to the slotted angle, the top of the
parapet is fixed with 20mm teak wood ornamental beeding alround complete
as per specification including cost of all materials and labour, painting, lead &
lift and as per the direction of Engineer-in-Charge of the work and also as per
drawing appended.
39.13.2 Teak wood platform: Providing and fixing wooden platform of overall size Sqm
2450x1850x175mm using teak wood of section 50x50mm of legs, 50x50mm
for horizontals both at suitable intervals from the point of view of stability, the
top of the platform covered with commercial block board of 25mm thick, all
sides covered with 6mm thick one side teak plywood fixed firmly to the platform
including joining the wooden sections properly using nails/screws, fevicol
including cost of wood, nails/screws, fevicol, cost of painting/polishing
complete as per specification including cost of all materials and labour,
painting, lead & lift and as per the direction of Engineer-in-Charge of the work
and also as per drawing appended.

39.13.3 Horse Shoe Table: Providing and fixing "HORSE SHOE TABLE" of overall size Sqm
4500 x 2200x 750mm using teak wood of size 100x1OOmm for legs at suitable
intervals, 50x75mm section for horizontal support at top, 50x1OOmm section
horizontal support at bottom as shown in figure. The top of the table which
should be 600mm in width all along, is covered with 19mm thick block board
and 1.50mm thick formica sheet fixed on top of the block board, all of
approved make. The inside vertical surface is covered with 6mm thick one side
teak plywood, including providing teak wood beeding alround the table for
good aesthetic appearance, including joining the wooden sections properly
using nails/screws, fevicol complete as per specification including cost of all
materials and labour, painting, lead & lift and as per the direction of Engineer-
in-Charge of the work and also as per drawing appended.

39.13.4 Teak wood witness box: Providing and fixing witness box of overall size No
1200x750x1350mm with one side door way as shown in figure using teak
wood of size 75x75mm for legs, 50x75mm size for horizontal support at top
and bottom, and 25x50mm size section for verticals between legs with a
spacing of 150mm including fixing 19mm thick commercial block board for full
area at bottom and for a length of 300mm at top to facilitate keeping the file
during the course of witness including JOining the wooden sections properly
using nails/screws, fevicol including cost of wood, nails/screws, fevicol, cost of
painting/polishing complete as per specification including cost of all materials
and labour, painting, lead & lift and as per the direction of Engineer-in-Charge
of the work and also as per drawing appended.

39.13.5 Teak wood Accused box: Providing and fixing accused box of overall size No
3000x1150x1350mm with one side door way as shown in figure using teak
wood of size 75x75mm for legs, 50x75mm size for horizontals at top and
bottom and 25x50mm size for verticals between legs with a spacing of 150mm
including fixing 19mm thick commercial board for full area at bottom, including
joining the wooden sections properly using nails/screws, fevicol including cost
of wood, nails/screws, hinges, locking arrangements for the opening, fevicol,
cost of painting/polishing complete as per specification including cost of all
materials and labour, painting, lead & lift and as per the direction of Engineer-
in-Charge of the work and also as per drawing appended.
39.14 STRAIGHT WORKSTATION (Frame and separator) Providing and fixing
STRAIGHT WORKSTATION consisting of back to back unit made out of 75
mm thick MS CRCA powder coated, tile based system for main sprine,
Separator 25 mm tghick PLPB- BSL wooden separator for return spine, Top tile
finish 8 mm thick MDF covered with Fabric of approved colour and one writing
board (600 mm W) and one soft board (600 mmw) per workstation,Bottom tile
finish 9 mm thick Laminate tile of approved colour, Raceway- one middle
raceway (600mm W) below table top per workstation and continous raceway at
the skirting level, Wire manager- ABS plastic grommet one number per
table,Table top- 25 mm thick PLPB with straight table top Hardware_MS
powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table
joint plate., as per specifications, drawings and as directed by Engineer in
charge.

39.14.1 Sharing workstation 1A ) Size : 1200 mmW x 600mm D x 1200 mm ht - No

(Sharing - Edge binding table top): Back to Back (set of 2)
39.14.2 Sharing workstation 1B ) Size : 1200 mmW x 540mm D x 1200 mm ht - Unit
(Sharing-Post formed table top): Back to Back (set of 2)
39.14.3 Non Sharing workstation 1C) Size : 1200 mmW x 600mm D x 1200 mm ht No
(Non Sharing-Edge binding table top): single unit
39.14.4 Non Sharing workstation 1D ) Size : 1200 mmW x 540mm D x 1200 mm ht No
(Non Sharing-Post formed table top) single unit
39.15 STRAIGHT WORKSTATION (Frame) Providing and fixing STRAIGHT
WORKSTATION ( Frame ) consisting of back to back unit made out of 75 mm
thick MS CRCA powder coated, tile based system for main and return spine,
Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one
writing board (600 mm w) and one soft board ( 600 mmw ) per
workstation,Bottom tile finish 9 mm thick Laminate tile of approved colour,
Raceway- one middle raceway ( 600mmW ) below table top per workstation
and continous raceway at the skirting level, Wire manager- ABS plastic
grommet one number per table,Table top - 25 mm thick PLPB with straight
table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS
powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table
joint plate., as per specifications , drawings and as directed by Engineer in
charge Sharing workstation

39.15.1 Sharing workstation 2A ) Size : 1200 mmW x 600mm D x 1200 mm ht - No

(Sharing - Edgebinding table top): Back to Back (set of 2)
39.15.2 Sharing workstation 2B ) Size : 1200 mmW x 540mm D x 1200 mm ht - No
(Sharing-Postformed table top): Back to Back (set of 2)
39.15.3 Non Sharing workstation 2C) Size : 1200 mmW x 600mm D x 1200 mm ht No
(Non Sharing-Edgebinding table top): single unit
39.15.4 Non Sharing workstation 2D ) Size : 1200 mmW x 540mm D x 1200 mm ht No
(Non Sharing-Postformed table top): single unit
39.16 CUBICLE WORKSTATIONS Providing and fixing CUBICLE WORKSTATIONS
consisting of wings made out of 75 mm thick MS CRCA powder coated ,tile
based system for main and return spine, Top tile finish 8 mm thick MDF
covered with Fabric of approved colour and one writing board (600 mm w) and
one soft board (600 mmw) per workstation, Bottom tile finish 9 mm thick
Laminate tile of approved colour, Raceway- one middle raceway (600mmW)
below table top per workstation and continous raceway at the skirting level,
Wire manager- ABS plastic grommet one number per table,Table top - 25 mm
thick PLPB with straight table top End Table 25 mm thick PLPB with
straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt,
separator hook on bkt, L bkt and Table joint plate., as per specifications ,
drawings and as directed by Engineer in charge

39.16.1 X TYPE 4 wings 3A) Size : 1500 mmW x 1200mm D x 1200 mm ht : No

39.16.2 X TYPE 4 wings 3B) Size : 1500 mmW x 1500mm D x 1200 mm ht: No
39.16.3 T TYPE 2 wings 3C) Size : 1500 mmW x 1200mm D x 1200 mm ht No
39.16.4 T TYPE 2 wings 3D) Size : 1500 mmW x 1500mm D x 1200 mm ht : No
39.16.5 C TYPE 2 wings 3C) Size : 1500 mmW x 1200mm D x 1200 mm ht: No
39.16.6 C TYPE 2 wings 3D) Size : 1500 mmW x 1500mm D x 1200 mm ht: No
39.16.7 L TYPE one wing 3C) Size : 1500 mmW x 1200mm D x 1200 mm ht: No
39.16.8 L TYPE one wing 3D) Size : 1500 mmW x 1500mm D x 1200 mm ht: No
39.17 FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and
fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick
PLPB table top , 25 mm thick PLPB with edge bomded End table,18 mm thick
PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one
number per table Hardware-Minifix assembly and screw leg., as per
specifications, drawings and as directed by Engineer in charge

39.17.1 Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgebinding table top) Side No
Table : 900 mm W x 450mm D X 750 mm ht
39.17.2 Main Table : 1500 mmW x 750mm D x 750 mm ht (Post formed table top) Side No
Table : 900 mm W x 450mm D X 750 mm ht
39.18 FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and
fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick
PLPB table top , 25 mm thick PLPB with edge bonded End table,18 mm thick
PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one
number per table Hardware-Minifix assembly and screw leg., as per
specifications, drawings and as directed by Engineer in charge

39.18.1 1200 mmW x 600mm D x 750 mm ht (Edgebinding table top) No

39.18.2 1500 mmW x 600mm D x 750 mm ht (Edgebinding table top) No
39.18.3 1200 mmW x 540mm D x 750 mm ht (Post formed table top No
39.18.4 1500 mmW x 540mm D x 750 mm ht (Post formed table top) No
39.19 Discussion table - wooden Providing and fixing discussion table wooden
consisting of 25 mm thick PLPB table top edge bounded, 25 mm thick PLPB
with edge bonded End table, Hardware-Minifix assembly and screw leg., as
per specifications, drawings and as directed by Engineer in charge
39.19.1 600 mm Dia X 750 mm Ht ( 4 seater ) No
39.19.2 750 mm Dia X 750 mm Ht ( 4 seater ) No
39.19.3 900 mm Dia X 750 mm Ht ( 4 seater ) No
39.20 Discussion table - Metal leg Providing and fixing discussion table metal leg
consisting of 25 mm thick PLPB table top edge bounded MS CRCA sheet
round plate at bottom and 75 mm dia pol at centre with 25 X 25 tube welded at
top Hardware-L bkt and screw leg ., as per specifications, drawings and as
directed by Engineer in charge
39.20.1 600 mm Dia X 750 mm Ht ( 4 seater ) No
39.20.2 750 mm Dia X 750 mm Ht ( 4 seater ) No
39.20.3 900 mm Dia X 750 mm Ht ( 4 seater ) No
39.21 Meeting table -wooden Providing and fixing meeting table consisting of 25 mm
thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End
table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix
assembly and screw leg., as per specifications, drawings and as directed by
Engineer in charge
39.21.1 1500 mm Dia X900 mm D X 750 mm Ht (6 seater) No
39.21.2 2400 mm Dia X1200 mm D X 750 mm Ht (12 seater) No
39.22 Providing and fixing conference table consisting of 25 mm thick PLPB table No
topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick
PLPB with edge bonded Modesty, Hardware- Minifix assembly and screw leg.,
as per specifications, drawings and as directed by Engineer in charge 4800
mmX 2400mm X 750 mm Ht (20 seater) - U shaped with a top width of 600
mm.
39.23 Modular Partition Providing and fixing modular partition consisting of 75mm
thick MS CRCA frames powder coated, tile based system frame, 8mm thick
MDF covered with Fabric of approved colour for Top file finish, 5mm thick clear
ordinary glass both side Middle tile finish, or 8mm thick MDF covered with
Fabric of approved colour for Middle tile finish, 9mm thick Laminate tile of
approved colour for Botom tile finish, Continuous skirting level raceway will be
provided. as per specifications, drawings and as directed by Engineer in
charge

39.23.1 75mm thick frames tile based system (Frame with Tile) Sqm
39.23.2 75mm thick frames tile based system (Frame with Glass) Sqm
39.24 Storage Unit - wooden - One side laminate Providing and fixing woode storage
unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm
PLY/PLPB with openable shutters and individual locking system for shutter, 9
mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele
locks,Minifix assembly, screw legs, Handles and tower bolt. complete as per
specifications, drawings and as directed by Engineer in charge

39.24.1 PLY STORAGE 900 mm W X 430 mm D X 750 mm No

39.24.2 PLY STORAGE 900 mm W X 430 mm D X 1200 mm No
39.24.3 PLY STORAGE 900 mm W X 430 mm D X 2100 mm Ht No
39.24.4 PLPB STORAGE 900 mm W X 430 mm D X 750 mm Ht No
39.24.5 PLPB STORAGE 900 mm W X 430 mm D X 1200 mm Ht No
39.24.6 PLPB STORAGE 900 mm W X 430 mm D X 2100 mm Ht No
39.25 Mobile pedestal unit- WOODEN Providing and fixing 450mmw X 450 mmd X No
685 mmht ) Mobile pedestal unit-WOODEN with 18mm thick PLPB with edge
bonded for body, Two equal drawer and filing drawer with centralized locking
system, Telescopic channels, castors, Handles and lock etc., complete as per
specifications, drawings and as directed by Engineer in charge

39.26 Mobile pedestal unit- METAL Providing and fixing 450mmw X 450 mmd X 685 No
mmht ) Mobile pedestal unit- Metal with MS CRCA sheet powder coated for
body, Two equal drawer and one filing drawer with centralized locking system,
Telescopic channels, castors, Handles and lock etc., complete as per
specifications, drawings and as directed by Engineer in charge.

39.27 Mobile pedestal unit- METAL with wooden facia Providing and fixing 450mmw No
X 450 mmd X 685 mmht ) Mobile pedestal unit- Metal with wooden facia made
of MS CRCA sheet powder coated for body, 18 mm thick PLPB with edge
bonded facia, Two equal drawer and one filing drawer with centralized locking
system, Telescopic channels, castors, Handles and lock etc., complete as per
specifications, drawings and as directed by Engineer in charge
Basic Rate
3,701.00

6,247.00

10,752.00

13,070.00

8,936.00

8,046.00

9,388.00
 8,508.00

15,343.00

60.00

950.00

2,100.00

4,660.00
1,510.00

1,646.00

1,576.00

7,232.00
 6,300.00

9,820.00

24,730.00

37,500.00
18,030.00

17,410.00

11,830.00

12,990.00

21,820.00

22,760.00

14,340.00

14,950.00

50,000.00
62,000.00
32,000.00
47,300.00
34,900.00
51,600.00
21,000.00
23,390.00

11,960.00

10,700.00

7,010.00
7,850.00
7,294.00
7,544.00

4,240.00
5,200.00
5,750.00

6,690.00
8,920.00
9,375.00

12,050.00
20,000.00
63,800.00
 4,800.00
5,268.00

6,964.00
10,000.00
17,678.00
6,830.00
9,820.00
16,960.00
4,900.00

6,250.00

5,800.00
Item No. Description Unit
40.1 Providing ABC Powder based MAP 50, 1Kg Providing 1kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 2.3 Kg, empty weight 1.3 Kg, Can Height 298MM,
Diameter 86.50MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 2
meters, applicable on Class A,B,C and electrically started Fire, A Rating 1A, B
Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, 5 years Warranty with instalert system etc., complete

40.2 Providing ABC Powder based MAP 50, 2Kg Providing 2kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM,
Diameter 108MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 2
meters, applicable on Class A,B,C and electrically started Fire, A Rating 1A, B
Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, 5 years Warranty with instalert system with Superior
quality EPDM Rubber Hosepipe etc., complete.

40.3 Providing ABC Powder based MAP 50, 4Kg Providing 4kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM,
Diameter 140MM, Discharge Time less than 13 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 2A, B
Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.4 Providing ABC Powder based MAP 50, 6Kg Providing 6kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM,
Diameter 160MM, Discharge Time less than 9 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 3A, B
Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coatingof Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
40.5 Providing ABC Powder based MAP 50, 9Kg Providing 9kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM,
Diameter 175MM, Discharge Time less than 13Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 4A, B
Rating 34B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 2.00MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.6 Providing ABC Powder based MAP 90, 2Kg Providing 2 kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM,
Diameter 108MM, Discharge Time less than 8 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 2
meters, applicable on Class A,B,C and electrically started Fire, A Rating 1A, B
Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.7 Providing ABC Powder based MAP 90, 4Kg Providing 4kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure
Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM,
Diameter 140MM, Discharge Time less than 13 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 2A, B
Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.8 Providing ABC Powder based MAP 90, 6Kg Providing 6kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight9.40 Kg, empty weight 3.4 Kg, Can Height 480MM,
Diameter 160MM, Discharge Time less than 13 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 3A, B
Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete
40.9 Providing ABC Powder based MAP 90, 9Kg Providing 9kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight 14.9 Kg, empty weight 5.90 Kg, Can Height 615MM,
Diameter 175MM, Discharge Time less than 13Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 4
meters, applicable on Class A,B,C and electrically started Fire, A Rating 4A, B
Rating 34B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 2.00 MM, Helium Leak Detection Tested, ISI and EN Approved, 5
years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.10 Providing ABC Powder based MAP 90, 25Kg Providing 25kg Fire Extinguisher Each
Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure
Gauge, Gross Weight 76Kg, empty weight 51 Kg, Can Height 1200 MM,
Diameter 300 MM, Discharge Time less than 30 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 6
meters, applicable on Class A,B,C and electrically started Fire, Can
construction : Deep drawn & Co., Mig welded, valve Construciton: Forging and
Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of
Can: Epoxy Polyster power coating, Sheet metal thickness: 4.00 MM, 1 year
Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete

40.11 Providing Ceiling mounted 5 Kg Providing 5kg Fire Extinguisher Mono Each
Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge,
Gross Weight 7.7Kg, empty weight 2.7 Kg, Can Height 264 MM, Diameter 240
MM, Discharge Time less than 8 Secs, Controllable discharge mechanism
(Squeeze grip with easy snap safety seal), Range minimum 10 meters,
applicable on Class A,B,C and electrically started Fire, Can construction :
Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining,
Internal Coating of Can: Epoxy powder coating, External Coating of Can:
Epoxy Polyster power coating, Sheet metal thickness: 2.00 MM, Helium Leak
Detection Tested, 5 years warranty. etc., complete

40.12 Providing 10Kg Ceiling Mounted Providing 10kg Fire Extinguisher Mono Each
Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge,
Gross Weight 14.8Kg, empty weight 4.8 Kg, Can Height 320 MM, Diameter
300 MM, Discharge Time less than 10 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 10
meters, applicable on Class A,B,C and electrically started Fire, Can
construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and
Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of
Can: Epoxy Polyster power coating, Sheet metal thickness: 2.00 MM, Helium
Leak Detection Tested, 5 years warranty. etc., complete
40.13 Providing 1 Kg Fire Extinguisher Monnex powder Providing 1kg Stored Each
Pressure Type, Pressure Guage, Gross Weight 2.7 Kg, empty weight 1.7 Kg,
Can Height 344 MM, Diameter 108MM, Discharge Time less than 8 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 4 meters, applicable on Class A,B and electrically started Fire,
B Rating 89B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 1.60 MM, 5 years warranty.with instalert system with Superior
quality EPDM Rubber Hosepipe etc., complete

40.14 Providing 2 Kg Fire Extinguisher Monnex powder Providing 2kg Stored Each
Pressure Type, Pressure Guage, Gross Weight 4.9 Kg, empty weight 2.9 Kg,
Can Height 440 MM, Diameter 140 MM, Discharge Time less than 9 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 4 meters, applicable on Class A,B and electrically started Fire,
Very effective on Class B Fire, B Rating 144B, Can construction : Deep drawn
& Co., Mig welded, valve Construciton : Forging and Mechining, Internal
Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy
Polyster power coating, Sheet metal thickness: 1.60 MM, 5 years warranty.
with instalert system with Superior quality EPDM Rubber Hosepipe etc.,
complete

40.15 Providing 4 Kg Fire Extinguisher Monnex powder Providing 4kg Stored Each
Pressure Type, Pressure Guage, Gross Weight 7.4Kg, empty weight 3.4 Kg,
Can Height 480 MM, Diameter 160 MM, Discharge Time less than 13 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 4 meters, Can construction : Deep drawn & Co., Mig welded,
valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet
metal thickness: 1.60 MM, 5 years warranty. with instalert system with Superior
quality EPDM Rubber Hosepipe etc., complete

40.16 Providing 4 Kg Fire Extinguisher for Lite metal fires SPM-TEC Providing 4kg Each
SPM-TEC Powder Based stored presure type melting point at 600-650 degree
C, Applicable on Class D metal fires in Magnesium, Aluminium, Zinc, Sodium
Potassium, Francium, Lithium, Cesium, Pressure Guage, Gross weight Gross
Weight 6.9Kg, empty weight 2.9 Kg, Can Height 440 MM, Diameter 140 MM,
Discharge Time less than 15 Secs, Controllable discharge mechanism
(Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can
construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and
Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of
Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 MM, helium
leak detection tested, EN approved, 5 years warranty with instalert system with
Superior quality EPDM Rubber Hosepipe etc., complete
40.17 Providing 6 Kg Fire Extinguisher for Lite metal fires SPM-TEC Providing 6kg Each
SPM-TEC Powder Based stored presure type melting point at 600-650 degree
C, Applicable on Class D metal fires in Magnesium, Aluminium, Zinc, Sodium
Potassium, Francium, Lithium, Cesium, Pressure Guage, Gross weight Gross
Weight 9.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 MM,
Discharge Time less than 16 Secs, Controllable discharge mechanism
(Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can
construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and
Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of
Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 MM, helium
leak detection tested, EN approved, 5 years warranty. with instalert system
with Superior quality EPDM Rubber Hosepipe etc., complete

40.18 Providing 9 Kg Fire Extinguisher for Lite metal fires SPM-TEC Providing 9kg Each
SPM-TEC Powder Based stored presure type melting point at 600-650 degree
C, Applicable on Class D metal fires in Magnesium, Aluminium, Zinc, Sodium
Potassium, Francium, Lithium, Cesium, Pressure Guage, Gross weight Gross
Weight 14.9Kg, empty weight 5.9 Kg, Can Height 615 MM, Diameter 175 MM,
Discharge Time less than 18 Secs, Controllable discharge mechanism
(Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can
construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and
Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of
Can: Epoxy Polyster power coating, Sheet metal thickness: 2.00 MM, helium
leak detection tested, EN approved, 5 years warranty with instalert system with
Superior quality EPDM Rubber Hosepipe etc., complete

40.19 Providing 4 Kg Fire Extinguisher for Heavy metal fires SPM-PYRO Providing 4 Each
Kg Powder Based stored presure type melting point at 1200 degree C,
Applicable on Class D metal fires in heavy metals, alkali metals and alloys
Pressure Guage, Gross weight Gross Weight 6.9Kg, empty weight 2.9 Kg, Can
Height 440 MM, Diameter 140 MM, Discharge Time less than 15
Secs,Controllable discharge mechanism (Squeeze grip with easy snap safety
seal), Range minimum 4 meters, Can construction : Deep drawn & Co., Mig
welded, valve Construciton : Forging and Mechining, Internal Coating of Can:
Epoxy powder coating, External Coating of Can: Epoxy Polyster power
coating, Sheet metal thickness: 1.60 MM, helium leak detection tested, EN
approved, 5 years warranty.complete

40.20 Providing 6Kg Fire Extinguisher for Heavy metal fires SPM-PYRO Providing Each
6Kg Powder Based stored presure type melting point at 1200 degree C,
Applicable on Class D metal fires in heavy metals, alkali metals and alloys
Pressure Guage, Gross weight Gross Weight 9.4Kg, empty weight 3.4 Kg, Can
Height 480MM, Diameter 160 MM, Discharge Time less than 16 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 4 meters, Can construction : Deep drawn & Co., Mig welded,
valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy
powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet
metal thickness: 1.60 MM, helium leak detection tested, EN approved, 5 years
warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete
40.21 Providing 9 Kg Fire Extinguisher for Heavy metal fires, SPM-PYRO Providing Each
9Kg Powder Based stored presure type melting point at 1200 degree C,
Applicable on Class D metal fires in heavy metals, alkali metals and alloys
Pressure Guage, Gross Weight 14.9Kg, empty weight 5.90 Kg, Can Height
615MM, Diameter 175 MM, Discharge Time less than 18 Secs, Controllable
discharge mechanism (Squeeze grip with easy snap safety seal), Range
minimum 4 meters, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 2.00 MM, helium leak detection tested, EN approved, 5 years
warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete

40.22 Providing 2Kg Fire Extinguisher Clean Agent HCFC 123 Providing 2Kg Each
Pressure type, Pressure Guage, Gross Weight 3.7Kg, empty weight 1.7 Kg,
Can Height 344MM, Diameter 108 MM, Discharge Time less than 8 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 2 meters, applicable on Class A,B,C and electrically started
Fire, B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve
Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal
thickness: 2.00 MM, helium leak detection tested, EN approved, 5 years
warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete

40.23 Providing 4 Kg Fire Extinguisher Clean Agent HCFC 123 Providing 4Kg Stored Each
Pressure Type, Pressure Gauge, Gross Weight 6.9 kg empty weight 2.9 kg
Can Height 440MM, Diameter 140 MM, Discharge minium 9 Secs, Controllable
discharge mechanism (Squeezegrip with easy snap safety seal), Range
minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A
Rating 1A, B Rating 13B Can Construction; Deep drawn & CO, Mig welded,
Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy
Powder coating, External Coating of Can : Epoxy Polyster Powder coating,
Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, EN Approved,
5 years warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.24 Providing 6 Kg Fire Extinguisher Clean Agent HCFC 123 Providing 6Kg Stored Each
Pressure Type, Pressure Gauge, Gross Weight 9.4kg. empty weight 3.4 kg
Can Height 480MM, Diameter 160 MM, Discharge Time less than 13 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 4 Meters, applicable on Class A,B,C and electrically started
Fire, A Rating 2A, B Rating 21B Can Construction; Deep drawn & CO, Mig
welded, Valve Construction: Forging & Machining, Internal Coating of Can :
Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder
coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, EN
Approved, 5 years warranty with instalert system with Superior quality EPDM
Rubber Hosepipe etc., complete

40.25 Providing 5Kg Ceiling Mounted Fire Extinguisher Clean Agent HCFC 123 Each
Providing 5Kg Stored Pressure Type, Pressure Gouge, Gross Weight 7.7kg.
empty weight 2.7 kg Can Height 267MM, Diameter 230 MM, Discharge Time
less than 8Secs,Auto discharge mechanism, on temperature rise, applicable
on Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of
Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder
coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, 5
Years Warranty
40.26 Providing 10Kg Ceiling Mounted Fire Extinguisher Clean Agent HCFC 123 Each
Providing 10Kg Stored Pressure Type, Pressure Gouge, Gross Weight 14.8kg.
empty weight 4.8 kg Can Height 316MM, Diameter 300 MM, Discharge Time
less than 10Secs,Auto discharge mechanism, on temperature rise, applicable
on Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of
Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder
coating, Sheet metal thickness: 2.0MM, Helium Leak Detection Tested, 5 Years
Warranty

40.27 Providing 2Kg Fire Extinugisher Clean Agent FE36 Dupont Providing 2Kg Each
Stored Pressure Type, Pressure Gauge, Gross Weight 3.70kg. empty weight
1.7 kg Can Height 344MM, Diameter 108 MM, Discharge Time minimum 8
Secs, Controlable discharge mechanism, Range minimum 2 Meters, applicable
on Class A,B,C and electrically started Fire B, Rating 8B, Can Construction;
Deep drawn & CO,Mig welded, Valve Construction: Forging & Machining,
Internal Coating of Can : Epoxy Powder coating, External Coating of Can :
Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, Helium Leak
Detection Tested, 5 Years Warranty with instalert system with Superior quality
EPDM Rubber Hosepipe etc., complete

40.28 Providing 4Kg Fire Extinugisher Clean Agent FE36, Dupont Providing 4Kg Each
Stored Pressure Type, Pressure Gauge, Gross Weight 6.9kg. empty weight 2.9
kg Can Height 440MM, Diameter 140 MM, Discharge Time minimum 13 Secs,
Controlable discharge mechanism, Range minimum 4 Meters, applicable on
Class A,B,C and electrically started Fire A, Rating 1A, B, Ranting 13B, Can
Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging &
Machining, Internal Coating of Can : Epoxy Powder coating, External Coating
of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM,
Helium Leak Detection Tested, 5 Years Warranty with instalert system with
Superior quality EPDM Rubber Hosepipe etc., complete

40.29 Providing 6Kg Fire Extinugisher Clean Agent FE36, Zeri ODP Providing 6Kg Each
Stored Pressure Type, Pressure Gauge, Gross Weight 9.4kg. empty weight 3.4
kg Can Height 480MM, Diameter 160 MM, Discharge Time minimum 13 Secs,
Controlable discharge mechanism, Range minimum 4 Meters, applicable on
Class A,B,C and electrically started Fire A Rating 5A, B, Ranting 34B, Can
Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging &
Machining, Internal Coating of Can : Epoxy Powder coating, External Coating
of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM,
Helium Leak Detection Tested, 5 Years Warranty with instalert system with
Superior quality EPDM Rubber Hosepipe etc., complete

40.30 Providing 9Kg Fire Extinugisher Clean Agent FE36, Zeri ODP Providing 9Kg Each
Stored Pressure Type, Pressure Gauge, Gross Weight 13.8kg. empty weight
4.8 kg Can Height 611MM, Diameter 175 MM, Discharge Time minimum 12
Secs, Controlable discharge mechanism, Range minimum 4 Meters, applicable
on Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of
Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder
coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, 5
Years Warranty
40.31 Providing 5Kg Ceiling Mounted Fire Extinugisher Clean Agent FE36, Zeri ODP Each
Providing 5Kg Stored Pressure Type, Pressure Gauge, Gross Weight 7.7kg.
empty weight 2.7kg Can Height 267MM, Diameter 230 MM, Discharge Time
less than 8 Secs,Auto discharge mechanism, on temperature rise, applicable
on Class A,B,C and electrically started Fire, Can Construction; Deep drawn &
CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of
Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder
coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, 5
Years Warranty

40.32 Providing 10Kg Ceiling Mounted Fire Extinugisher Clean Agent FE36, Zeri Each
ODP Providing 10Kg Stored Pressure Type, Pressure Gauge, Gross Weight
14.8kg. empty weight 4.8kg Can Height 316MM, Diameter 300 MM, Discharge
Time less than 8 Secs,Auto discharge mechanism, on temperature rise,
applicable on Class A,B,C and electrically started Fire, Can Construction; Deep
drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal
Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy
Polyster Powder coating, Sheet metal thickness: 1.60MM, Helium Leak
Detection Tested, 5 Years Warranty

40.33 CO2 2Kg Squeeze grip Providing 2 Kg CO2 Gas Type Fire Extinugisher Each
Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1
Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge
Time less than 8 Secs, Controllable discharge mechanism, Applicable on Class
B&C Fire, B Rating 8B, Can Construction : Hot spinning/Forging, Valve
Construction : Forging & Machining, Internal Coating of Can : Not Applicable,
External coating of Can : Spray Painting, Sheet metal thickness : 4.0MM ISI
Approved, 1 Year Warranty.with instalert system with Superior quality EPDM
Rubber Hosepipe etc., complete

40.34 CO2 4.5Kg Squeeze grip Providing 4.5Kg CO2 Gas Type Fire Extinugisher, Each
Trolley Mounted, Easy Weight Management used Unused Mechanism,
Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height
860MM Diameter 140MM, Discharge Time less than13 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, B Rating 13B, Can
Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining,
Internal Coating of Can : Not Applicable, External coating of Can : Spray
Painting, Sheet metal thickness : 4.5MM ISI Approved, 1 Year Warranty. with
instalert system with Superior quality EPDM Rubber Hosepipe etc., complete

40.35 Providing 4.5Kg CO2 Wheel Type Providing 4.5Kg CO2 gas valve type Fire Each
Extinugisher, Trolley Mounted, Easy Weight Management used Unused
Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM
Diameter 140MM, Discharge Time less than13 Secs, Controllable discharge
mechanism, Applicable on Class B&C Fire, B Rating 13B, Can Constuction :
Hot spinning/Forging, Valve Construction : Forging & Machining, Internal
Coating of Can : Not Applicable, External coating of Can : Spray Painting,
Sheet metal thickness : 4.5MM ISI Approved, 1 Year Warranty.with instalert
system with Superior quality EPDM Rubber Hosepipe etc., complete
40.36 Providing 6.5Kg CO2 Wheel Type Providing 6.5Kg CO2 Gas valve type Fire Each
Extinugisher, Trolley Mounted, Easy Weight Management used Unused
Mechanism, Gross Weight 30.5 Kg. empty Weight 24.0 Kg. Can Height
1015MMDiameter 140MM, Discharge Time less than 13 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, B Rating 34B, Can
Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining,
Internal Coating of Can : Not Applicable, External coating of Can : Spray
Painting, Sheet metal thickness : 4.5MM ISI Approved, 1 Year Warranty. with
instalert system with Superior quality EPDM Rubber Hosepipe etc., complete

40.37 Providing 22.5Kg CO2 Wheel Type Providing 22.5Kg CO2 Gas Type Fire Each
Extinugisher, Trolley Mounted, Easy Weight Management used Unused
Mechanism, Gross Weight 93.5 Kg. empty Weight 71.0Kg. Can Height
1333MM Diameter 232MM, Discharge Time less than20 Secs, Controllable
discharge mechanism, Applicable on Class B&C Fire, Can Constuction: Hot
spinning/Forging, Valve Construction : Forging & Machining, Internal Coating
of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal
thickness : 5.20 MM ISI Approved, 1 Year Warranty. complete

40.38 Providing CO2 Aluminium - 2kg Providing 2Kg CO2 Gas aluminium body Each
Squeeze grip Fire Extinugisher, Used Unused Mechanism, Squeeze Grip,
Gross Weight 5.16 Kg. empty Weight 3.16Kg. Can Height 615MM Diameter
111MM, Discharge Time less than 8 Secs, Controllable discharge mechanism,
Applicable on Class B&C Fire, B Rating 13B, Can Constuction : Cold Impact
Extrusion, Valve Construction : Forging & Machining, Internal Coating of Can :
Not Applicable, External coating of Can : Spray Painting, Aluminium metal ISO
& PESO Approved, 3 Year Warranty. complete

40.39 Providing CO2 Aluminium - 4.5kg Providing 4.5Kg CO2 Gas Type aluminium Each
body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight
Management, Used Unused Mechanism, Squeeze Grip, Gross Weight
11.16Kg. empty Weight 6.66Kg. Can Height 860MM Diameter 140MM,
Discharge Time less than10 Secs, Controllable discharge mechanism,
Applicable on Class B&C Fire, B Rating 13B, Can Constuction : Cold Impact
Extrusion, Valve Construction : Forging & Machining, Internal Coating of Can :
Not Applicable, External coating of Can : Spray Painting, Aluminium metal ISO
& PESO Approved, 3 Year Warranty. complete

40.40 Providing Aqueous Film-Forming Foam - 9 Ltr Providing 9 Ltr Fire Extinugisher Each
Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge,
Gross Weight 15.10kg. empty weight 6.10kg Can Height 615MM, Diameter
175 MM, Discharge Time less than 60 Secs, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Range minimum 6
Meters, applicable on Class A,B,C A Rating 13A, B Rating 55B, Can
Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging &
Machining, Internal Coating of Can : Epoxy Powder coating, External Coating
of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 2.0MM, ISI
and EN Approved, Helium Leak Detection Tested, 1 Years Warranty with
instalert system with Superior quality EPDM Rubber Hosepipe etc., complete
40.41 Providing Aqueous Film-Forming Foam - 50 Ltr Providing 50 Ltr Fire Each
Extinugisher Aqueous Film-Forming Foam Type, External Cartridge Type,
Pressure Gauge, Gross Weight 102kg. empty weight 52kg Can Height
1192MM, Diameter 300 MM, Discharge Time less than 180 Secs, Controllable
discharge mechanism (Squeeze grip with easy snap safety seal), Range
minimum 10 Meters, applicable on Class A,B,Can Construction; Deep drawn &
CO2, Mig welded, Valve Construction: Forging & Machining, Internal Coating
of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster
Powder coating, Sheet metal thickness: 4.0MM, 1 Years Warranty with instalert
system with Superior quality EPDM Rubber Hosepipe etc., complete

40.42 Providing Water - 9 Ltr - Stored Pressure Providing 9 Ltr Water type Fire Each
Extinugisher, Stored Pressure Type, Pressur Gauge, Gross Weight 15.1kg.
empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time
less than 120 Secs, Controllable discharge mechanism (Squeeze grip with
easy snap safety seal), Range minimum 6 Meters, applicable on Class A Fire,
A Rating 3A, Can Construction; Deep drawn & CO, Mig welded, Valve
Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder
coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal
thickness: 2.0MM, ISI and EN Approved, Helium Leak Detection Tested, 1
Years Warranty with instalert system with Superior quality EPDM Rubber
Hosepipe etc., complete

40.43 Providing Water - 50 Ltr Providing 50 Ltr Fire Extinugisher Water Type, Each
External Cartidge, Pressure Gauge, Gross Weight 108kg. empty weight 58kg
Can Height 1200MM, Diameter 300 MM, Discharge Time less than 180 Secs,
Controllable discharge mechanism (Squeeze grip with easy snap safety seal),
Range minimum 10 Meters, applicable on Class A Fire, Can Construction;
Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining,
Internal Coating of Can : Epoxy Powder coating, External Coating of Can :
Epoxy Polyster Powder coating, Sheet metal thickness: 4.0MM, 1 Years
Warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete

40.44 Providing Hydro Pyroquell Sytem - 2ltr Providing 2 Ltr Hydro Pyroquell Sytem Each
Watermist technology base, Stored pressure type, Rating -15F, Solid stainless
body to withstand hight temperatures, Tamper-proof safety seal, Effective on
Class-A, Class-B, Class-F and Electrically Started Fires, Built-in pressure
gauge, Instalert, Uses distilled water, Gross Weight 4.60 Kg, empty Weight
2.60kg, can Height 440mm Diameter 140MM, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Can Construction :
Deep drawn & CO2 Mig welded, Valve Construction : Forgin & Machining,
ERDA approved, Sheet metal thickness : 1.50MM, Helium Leak Detection
Tested, Discharge Time : Min. 8 Sec., 5 Year Warranty complete

40.45 Providing Hydro Pyroquell Sytem - 3ltr Providing 3 Ltr Hydro Pyroquell Sytem Each
Watermist technology base, Stored pressure type, Rating -5A. 21B & 25F,
Solid stainless body to withstand hight temperatures, Tamper-proof safety seal,
Effective on Class-A, Class-B, Class-F and Electrically Started Fires, Built-in
pressure gauge, Instalert, Uses distilled water, Gross Weight 6.23 Kg, empty
Weight 3.23kg, can Height 480mm Diameter 160MM, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Can Construction :
Deep drawn & CO2 Mig welded, Valve Construction : Forgin & Machining,
ERDA approved, Sheet metal thickness : 1.50MM, Helium Leak Detection
Tested, Discharge Time : Min. 13 Sec., 5 Year Warranty complete
40.46 Providing Hydro Pyroquell Sytem - 6ltr Providing 6 Ltr Hydro Pyroquell Sytem Each
Watermist technology base, Stored pressure type, Rating -8A. 34B & 40F,
Solid stainless body to withstand hight temperatures, Tamper-proof safety seal,
Effective on Class-A, Class-B, Class-F and Electrically Started Fires, Built-in
pressure gauge, Instalert, Uses distilled water, Gross Weight 10.4 Kg, empty
Weight 4.4kg, can Height 615mm Diameter 175MM, Controllable discharge
mechanism (Squeeze grip with easy snap safety seal), Can Construction :
Deep drawn & CO2 Mig welded, Valve Construction : Forgin & Machining,
ERDA approved, Sheet metal thickness : 1.50MM, Helium Leak Detection
Tested, Discharge Time : Min. 13 Sec., 5 Year Warranty complete

40.47 Providing Green mist - 2ltr Green mist Extinguishers : Providing 2 Ltr Each
Watermist technology base, Stored pressure type, Rating -15F, Mild steel body,
Tamper-proof safety seal, Effective on Class-A, Class-B, Class-F and
Electrically Started Fires, Built-in pressure gauge, Instalert, Uses distilled
water, Gross Weight 4.55 Kg, empty Weight 2.73kg, can Height 435mm
Diameter 140MM, Controllable discharge mechanism (Squeeze grip with easy
snap safety seal), Can Construction : Deep drawn & CO2 Mig welded, Valve
Construction : Forgin & Machining, ERDA approved, Sheet metal thickness :
1.60MM, Helium Leak Detection Tested, Discharge Time : Min. 22 Sec., 5 Year
Warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete

40.48 Providing Green mist - 3ltr Green mist Extinguishers : Providing 3 Ltr Each
Watermist technology base, Stored pressure type, Rating -5A. 21B & 25F, Mild
Steel body, Tamperproof safety seal, Effective on Class-A, Class-B, Class-F
and Electrically Started Fires, Built-in pressure gauge, Instalert, Uses distilled
water, Gross Weight 6.23 Kg, empty Weight 3.23kg, can Height 480mm
Diameter 160MM, Controllable discharge mechanism (Squeeze grip with easy
snap safety seal), Can Construction : Deep drawn & CO2 Mig welded, Valve
Construction : Forgin & Machining, ERDA approved, Sheet metal thickness :
1.60MM, Helium Leak Detection Tested, Discharge Time : Min. 13Sec., 5 Year
Warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete

40.49 Providing Green mist - 6ltr Green mist Extinguishers : Providing 6 Ltr Each
Watermist technology base, Stored pressure type, Rating -8A. 34B & 40F, Mild
steel body t, Tamperproof safety seal, Effective on Class-A, Class-B, Class-F
and Electrically Started Fires, Built-in pressure gauge, Instalert, Uses distilled
water, Gross Weight 12.15 Kg, empty Weight 6.15kg, can Height 615mm
Diameter 175MM, Controllable discharge mechanism (Squeeze grip with easy
snap safety seal), Can Construction : Deep drawn & CO2 Mig welded, Valve
Construction : Forgin & Machining, ERDA approved, Sheet metal thickness :
2.00MM, Helium Leak Detection Tested, Discharge Time : Min. 64 Sec., 5 Year
Warranty with instalert system with Superior quality EPDM Rubber Hosepipe
etc., complete
40.50 Providing CQRS 2 Kg - Direct Low Pressue System Providing CQRS 2 Kg - Each
Direct Low Pressue System - Gross Weight 3.98 Kg, Empty Weight 1.98 Kg,
Can Height 333 MM, Diameter 108MM, Can construction : Deep Drawn, Valve
Construction : Forging / Machining, External Construction : Epoxy Powder
Coating, Helium Leak Detection Tested, Sheet Metal Thickness: 1.60MM, 1
Year warranty, Valve, Nickel Plated, With Intergrated Ball Valve, Integrated
position control for ball valve: open - close, Extinguishing Clean Agent FE 36,
Zero ODP, Stored Pressue, Fitted with Pressue Gauge, Control Panel having
Monitoring LED’s for AC Power, System On, Discharged, Valve Closed, Valve
Open, Pressure Healthy, Strobe Red, Strobe Amber, OLED Graphic Display
95x16, Battery Backp, 3 Outputs using Potential Free relay contact, Audio
Output using Piezo buzzer, 3 Meter Sensor Tue UV Resistance with
Pressrization of Tube Using Nitrogen Gas, End of Line Plug 1 Pc, End of Line
Adapter 1 Pc, T Connection/Elbow/Straight Connection 1 Pc, Pressure Switch
M 10x1, Switchpoint 15 bar - 1 Pc, Tube Attchment 6 Pc. complete

40.51 Providing CQRS 4 Kg - Direct Low Pressue System Providing CQRS 4 Kg - Each
Direct Low Pressue System - Gross Weight 7 Kg, Empty Weight 3 Kg, Can
Height 413 MM, Diameter 140MM, Can construction : Deep Drawn, Valve
Construction : Forging / Machining, External Construction : Epoxy Powder
Coating, Helium Leak Detection Tested, Sheet Metal Thickness: 1.60MM, 1
Year warranty, Valve, Nickel Plated, With Intergrated Ball Valve, Integrated
position control for ball valve: open - close, Extinguishing Clean Agent FE 36,
Zero ODP, Stored Pressue, Fitted with Pressue Gauge, Control Panel having
Monitoring LED’s for AC Power, System On, Discharged, Valve Closed, Valve
Open, Pressure Healthy, Strobe Red, Strobe Amber, OLED Graphic Display
95x16, Battery Backp, 3 Outputs using Potential Free relay contact, Audio
Output using Piezo buzzer, 4 Meter Sensor Tue UV Resistance with
Pressrization of Tube Using Nitrogen Gas, End of Line Plug 1 Pc, End of Line
Adapter 1 Pc, T Connection/Elbow/Straight Connection 1 Pc, Pressure Switch
M 10x1, Switchpoint 15 bar - 1 Pc, Tube Attchment 8Pc. complete

40.52 Providing CQRS 6 Kg - Direct Low Pressue System Providing CQRS 6 Kg - Each
Direct Low Pressue System - Gross Weight 9.42 Kg, Empty Weight 3.42 Kg,
Can Height 460 MM, Diameter 160MM, Can construction : Deep Drawn, Valve
Construction : Forging / Machining, External Construction : Epoxy Powder
Coating, Helium Leak Detection Tested, Sheet Metal Thickness: 2.00MM, 1
Year warranty, Valve, Nickel Plated, With Intergrated Ball Valve, Integrated
position control for ball valve: open - close, Extinguishing Clean Agent FE 36,
Zero ODP, Stored Pressue, Fitted with Pressue Gauge, Control Panel having
Monitoring LED’s for AC Power, System On, Discharged, Valve Closed, Valve
Open, Pressure Healthy, Strobe Red, Strobe Amber, OLED Graphic Display
95x16, Battery Backp, 3 Outputs using Potential Free relay contact, Audio
Output using Piezo buzzer, 5 Meter Sensor Tue UV Resistance with
Pressrization of Tube Using Nitrogen Gas, End of Line Plug 1 Pc, End of Line
Adapter 1 Pc, T Connection/Elbow/Straight Connection 1 Pc, Pressure Switch
M 10x1, Switchpoint 15 bar - 1 Pc, Tube Attchment 10Pc. complete
40.53 Providing CQRS 9 Kg - Direct Low Pressue System Providing CQRS 9 Kg - Each
Direct Low Pressue System - Gross Weight 14.53 Kg, Empty Wight 5.53Kg,
Can Height 590 MM, Diameter 175MM, Can construction : Deep Drawn, Valve
Construction : Forging / Machining, External Construction : Epoxy Powder
Coating, Helium Leak Detection Tested, Sheet Metal Thickness: 2.00MM, 1
Year warranty, Valve, Nickel Plated, With Intergrated Ball Valve, Integrated
position control for ball valve: open - close, Extinguishing Clean Agent FE 36,
Zero ODP, Stored Pressue, Fitted with Pressue Gauge, Control Panel having
Monitoring LED’s for AC Power, System On, Discharged, Valve Closed, Valve
Open, Pressure Healthy, Strobe Red, Strobe Amber, OLED Graphic Display
95x16, Battery Backp, 3 Outputs using Potential Free relay contact, Audio
Output using Piezo buzzer, 6 Meter Sensor Tue UV Resistance with
Pressrization of Tube Using Nitrogen Gas, End of Line Plug 1 Pc, End of Line
Adapter 1 Pc, T Connection/Elbow/Straight Connection 1 Pc, Pressure Switch
M 10x1, Switchpoint 15 bar - 1 Pc, Tube Attchment 10Pc. complete

40.54 Providing CQRS 2 Kg - Direct high Pressue System Providing CQRS 2 Kg - Each
Direct high Pressue System - Gross Weight 8.52 Kg, Empty Weight 6.52 Kg,
Can Height 595 MM, Diameter 108MM, Can construction : Hot Spinning/Heat
Treatment, Valve Construction : Forging / Machining, External Construction :
Epoxy Powder Coating, Sheet Metal Thickness: 3.5MM, 1 Year warranty,
Valve, Brass, Cylinder thread : M10x1, Outlet thread: W21, 8x1/14”, Bursting
Disc: 250 bar, Integrated position control for Valve: activated - not activated,
Intergrated position control for ball valve: open-close, Extinguishing Agent CO2
Control Panel having Monitoring LED’s for AC Power, System on, Discharged,
Valve Closed, Valve Open, Pressure Healthy, Strobe Red, Strobe Amber,
OLED Graphic Display 95x16, Battery Backp, 3 Outputs using Potential Free
relay contact, Audio Output using Piezo buzzer, 3 Meter Sensor Tube UV
Resistance with Pressurization of Tube Using Nitrogen Gas, End of Line Plug 1
Pc, End of Line Adapter 1 Pc, T Connection/Elbow/Straight Connection 1 Pc,
Pressure Switch M 10x1, Switchpoint 15 bar - 1 Pc, Tube Attchment, 6 Pc.
complete

40.55 Providing CQRS 4.5 Kg - Direct high Pressue System Providing CQRS 4.5Kg - Each
Direct High Pressue System - Gross Weight 14.73 Kg, Empty Weight 13.23
Kg, Can Height 735 MM, Diameter 139MM, Can construction : Hot
Spinning/Heat Treatment, Valve Construction : Forging / Machining, External
Construction : Epoxy Powder Coating, Sheet Metal Thickness: 4.2MM, 1 Year
warranty, Valve, Brass, Cylinder thread : 25E, Dip tube thread M10x1, Outlet
thread: W21, 8x1/14”, Bursting Disc: 250 bar, Integrated position control for
Valve: activated - not activated, Intergrated position control for ball valve: open-
close, Extinguishing Agent CO2 Control Panel having Monitoring LED’s for AC
Power, System on, Discharged, Valve Closed, Valve Open, Pressure Healthy,
Strobe Red, Strobe Amber, OLED Graphic Display 95x16, Battery Backp, 3
Outputs using Potential Free relay contact, Audio Output using Piezo buzzer, 3
Meter Sensor Tube UV Resistance with Pressurization of Tube Using Nitrogen
Gas, End of Line Plug 1 Pc, End of Line Adapter 1 Pc, T
Connection/Elbow/Straight Connection 1 Pc, Pressure Switch M 10x1,
Switchpoint 15 bar - 1 Pc, Tube Attchment 8 Pc. complete
40.56 Providing CQRS 6.5Kg - Direct High Pressue System Providing CQRS 6.5Kg - Each
Direct High Pressue System - Gross Weight 23.2 Kg, Empty Weight 16.7 Kg,
Can Height 980 MM, Diameter 139.7MM, Can construction : Hot Spinning/Heat
Treatment, Valve Construction : Forging / Machining, External Construction :
Epoxy Powder Coating, Sheet Metal Thickness: 4.5MM, 1 Year warranty,
Valve, Brass, Cylinder thread : 25E, Dip tube thread M10x1, Outlet thread:
W21, 8x1/14”, Bursting Disc: 250 bar, Integrated position control for Valve:
activated - not activated, Intergrated position control for ball valve: open-close,
Extinguishing Agent CO2 Control Panel having Monitoring LED’s for AC Power,
System on, Discharged, Valve Closed, Valve Open, Pressure Healthy, Strobe
Red, Strobe Amber, OLED Graphic Display 95x16, Battery Backp, 3 Outputs
using Potential Free relay contact, Audio Output using Piezo buzzer, 3 Meter
Sensor Tube UV Resistance with Pressurization of Tube Using Nitrogen Gas,
End of Line Plug 1 Pc, End of Line Adapter 1 Pc, T Connection/Elbow/Straight
Connection 1 Pc, Pressure Switch M 10x1, Switchpoint 15 bar - 1 Pc, Tube
Attchment 10 Pc. complete

40.57 Providing CQRS 22.5Kg - Direct High Pressue System Providing CQRS Each
22.5Kg - Direct High Pressue System - Gross Weight 63.6 Kg, Empty Weight
41.1 Kg, Can Height 1170 MM, Diameter 232MM, Can construction : Hot
Spinning/Heat Treatment, Valve Construction : Forging / Machining, External
Construction : Epoxy Powder Coating, Sheet Metal Thickness: 4.5MM, 1 Year
warranty, Valve, Brass, Cylinder thread : 25E, Dip tube thread M10x1, Outlet
thread: W21, 8x1/14”, Bursting Disc: 250 bar, Integrated position control for
Valve: activated - not activated, Intergrated position control for ball valve: open-
close, Extinguishing Agent CO2 Control Panel having Monitoring LED’s for AC
Power, System on, Discharged, Valve Closed, Valve Open, Pressure Healthy,
Strobe Red, Strobe Amber, OLED Graphic Display 95x16, Battery Backp, 3
Outputs using Potential Free relay contact, Audio Output using Piezo buzzer, 3
Meter Sensor Tube UV Resistance with Pressurization of Tube Using Nitrogen
Gas, End of Line Plug 1 Pc, End of Line Adapter 1 Pc, T
Connection/Elbow/Straight Connection 1 Pc, Pressure Switch M 10x1,
Switchpoint 15 bar - 1 Pc, Tube Attchment 12 Pc. complete

40.58 Smoke Detection - Wireless Providing Smoke Detection Control Panel - 28 Each
Wireless Zone, 2 Hardwired Zone, Tamper Altert, passcode protected, RF
Jamming recongnition, diagnition, diagnostic feture for RF signal strength
between panel and each detector, event reporting using PSTN Telephone line,
dialing upto 4 telephone numbers, event reporting as per users choice, remote
control using telephone line, LCD Screen Display, Intuitive graphic and audible
user interphase, Two Way voice interaction, Battery Backup stand by time upto
12 hrs. complete

40.59 Smoke Detector Smoke Detector - Fully Supervised Smoke Detector, Each
Photoelectric detection technology for superior detection sensitivity, sound and
transmitted alrerts for smoke, tamper and low battery, works on powercode
protocol, easy programming and enrolling to the control panel, Long life 9 votl
alkaline or lithium battery simple ceiling mount installation with separate
installation bracket. complete

40.60 Wireless Repeater Repeater : The Wireless repeater extends the Each
communication range of Detectors, by relaying data between receiver and
remote wireless transmitters, Up to 16 auxiliary repeaters can be positioned
between the farthest group of receivers transmitters and the receiver. complete
40.61 Wireless Siren Strobe External Wireless Siren - a fuly supervised Power Code Each
“outdoor (IP55) wireless siren and strobe light, Designed for external
installation, Wirefree connection between control panel and siren, Convenient
and rapid no-mess installation, Separate fire alarm signals, 98 db Piezo siren
and high power strobe light, Weather-resistant IP55, Two-way communication
for local & remote diagnostic, Plug-in powr supply, NIMH rechargeable back up
battery, Transmits status, tamper, low battery, supervisior and AC loss
messages to the control panel, Tri-state tamper switch identifies screw
mainpulation removal of cover or prying from the wall complete

40.62 Smoke Detector Model Dual chamber ionization detectors provide a high Each
degree of sensitivity and reliability, A unique inter-connectivity feature can be
used to warn occupants in adjoining areas, An independent 9 volt power
supply and a low battery warning system ensure that the smoke detectors are
always in working condition, Type - Dual Chamber lonisation, Connectivity -
Wired, Alarm Sound Level - 85dB complete

40.63 External GSM Dialler Providing the GSM unit enables the system to operate Each
over cellular net work. Indoor plug-in transformer, 120VAC 60 Hz / 9 VAC
Current Consumption : 40mA approx (idle), < 400mA (transmission), Backup
Battery: Ni-Metal, 7.2V, 1300 mAh complete
40.64 Smoke Detector Model Proividing Dual Technology Smoke Detectors, Sensor Each
Ionisation and photo electric, Button for Test/Silence, Remote Control
silence/Test uses mot remote controls to temporarily quiet unwanted alarms
and test alarm function, Intelligent Sensing Technology TM helps reduce the
number of nuisance alarms, 9V Battery complete
40.65 Smoke Detector Providing Dual Chamber lonisation type Smoke Detectors Each
with Escape Light, 9V Battery Operated, Test Button complete
40.66 Escape Singage Providing’s Escape Singage : Photoluminescent rigid plastic, SqCm
2 mm thickness, Printed on High Quality glass paint with UV resistance, 5
years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic
and lead free. Available in different types & sizes, Time after removing the light
source (in minutes) : 60 minutes, Luminescent intensity (milicandelas * per
square meter - mcd/sqm) : 30 mcd/sqm. Luminescent Intensity greater than
0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100

40.67 Singages for Walls/Floors Providing’s Escape Singage : Photoluminescent SqCm

rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV
resistance, 5 years warranty, Material Used - Non Radiocactive, non-
phosphorous, non toxic and lead free. Available in different types & sizes, Time
after removing the light source (in minutes) : 60 minutes, Luminescent intensity
(milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm. Luminescent
Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100

40.68 Panaromic Signage Providing’s Escape Singage : Photoluminescent rigid SqCm

plastic, 2 mm thickness, Printed on High Quality glass paint with UV
resistance, 5 years warranty, Material Used - Non Radiocactive, non-
phosphorous, non toxic and lead free. Available in different types & sizes, Time
after removing the light source (in minutes) : 60 minutes, Luminescent intensity
(milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm. Luminescent
Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100
40.69 Evacution Plan (Price for 10 + unit) Providing’s Escape Singage : SqCm
Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass
paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive,
non-phosphorous, non toxic and lead free. Available in different types & sizes,
Time after removing the light source (in minutes) : 60 minutes, Luminescent
intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.
Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In
Minutes) :3100

40.70 Evacution Plan (Price for less than 10 unit) Providing’s Escape Singage : SqCm
Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass
paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive,
non-phosphorous, non toxic and lead free. Available in different types & sizes,
Time after removing the light source (in minutes) : 60 minutes, Luminescent
intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.
Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In
Minutes) :3100

40.71 Marking Strips Providing’s Escape Singage : Photoluminescent rigid plastic, 2 SqCm
mm thickness, Printed on High Quality glass paint with UV resistance, 5 years
warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and
lead free. Available in different types & sizes, Time after removing the light
source (in minutes) : 60 minutes, Luminescent intensity (milicandelas * per
square meter - mcd/sqm) : 30 mcd/sqm. Luminescent Intensity greater than
0.32 mcd/sqm, Period of Light Decay* (In Minutes) : 3100

40.72 Escape Gear Providing’s Escape Gear, Mild Steel Box size 425mm x 360 mm Each
140mm, Epoxy power coated to protect it from weathering, Smoke Hood:
Tested to European Standard EN 403 : 1993-S, Known to reduce Carbon
monoxide,propenal (acrolein), hydrogen choloride, hydrogen cyanide and solid
& liquid toxic particles to manageable level for at least 15 minutes, shall
withstand temperatures upto 80 Deg. Single Use only, Fire Blanket : Size :
1.2m x 1.8m, Used to cover any vessel containing the fire completely, Used to
extinuish a clothing fire wrap blanket around victim

40.73 Supplying, Installing testing & commissioning approved make Centrifugal Nos.
pump end suction type coupled to Electric motor of suitable HP, fitted on a
commonbase frame and rated for Fireduty. The quated price shall aslo include
2 Nos. Pressureguages fitted on suction & delivery sides of the pump. The
pumps shall run on 400/440V 3 ph. 50 Hz electric supply. Duty of pumps: 1620
Lpm @ 70.0m Head. Control panel shall be as specified in item no, 87

40.74 Supplying, Installing testing & commissioning electrically driven jockey pump of Nos.
capacity 180.0 Lmpm at 75.0m head with all the necessary accessories viz.
Pressure guages etc. operating on 3Ph 50Hz, 400/440V AC supply including
foundation bolt etc. complete. Control panel shall be as per item No.87
40.75 Supply installing, testing and commissioning COMMON control panel for fire Unit
fighting system consisting of electrical mortor driven 60 HP Main fire pump,
Jockey pump and 12.5 HP consisting of the following INCOMING: 1 No. Set of
phase indicing lamps with SFU Rate 350A 1 No. set of 400 Amps. TPNE
Ai.Bus bars 1 No. 0-400 Amps. Ammeter, 1 No.0-600V voltmeter with phase
selector switch, Isolating Switch 400 A OUTGOING for Main Electrical Pump: 1
No. 200 Amps MCB 1 No.S/D starter suitable for 60 HP 1 No. Singel phse
preventor suitable for the pump described above 1 No. set of ON/OFF
indicating lamps 1 No. Automanual selector switch OUTGOING for Jockey
Pump: 1 No. 50 Amps MCB 1 No. DOL starter suitable for 12.50 HP 1 No.
Single phase preventor suitable for the pump described above 1 No. set of
ON/OFF indicating lamps 1 No. Automanual selector switch ENGINE
CONTROL SECTION NO.1 Diesel Engine for Standby pump: a) Main switch 2
pole ON/OFF -1 No. b) Batter charger with transpormer with rectifier reistance
DC ammeter, DC voltmeter, T/B selector swith -1 set c) Indicating lamps for
fault communication (Battery charger, supply ON, Control ON, engine running,
low oil pressure, high water pressure and enginer overspeed) - 6 Nos. Push
buttons for starter, stop reset - 4 Nos. e) Selector switches (Engine control,
mode selctor) - 2 Nos. f) Auxilary rellays/contractors/timer for dsequience
operating for starting and stopping of the engine -1 g) Hooter for audio alarm
(Industrial type) -1 No. Accessoreis for outgoing supply for the morttors GI
SWD earthing wire for the aove motor Accessories for outgoing supply for
Diesel Enginer: Copper conductor armoured cabe 2.5 sqmm of 12 Core x 2
runs a) Battery 2 strands b) Enginer ON/OFF 2 strands c) Low oil pressure 3
strands d) Enginer oversped 2 strands e) Water temperature 2 strands f) Spare
1 strand The cost of control panel shall also include necessary pressure
swithces with necessary cabling & inter-locked with the panel to enable
sequential operation of Pumps. Including terrace mortor necessary earthing All
the components shall be housed in a common cubical. However, the feed
cable for diesel engine driven pump battery charger shall be taken separately

40.76 Supplying Installing testing and commissioning electrically driven Terrance Nos.
pump of capacity 900.0 Lpm at 35.0m Head with all the necessary accessories
viz. Pressure guages etc. operating on 3Ph 50Hz, 400/440V AC supply
includng foundation, bolts etc. complete. Control panel shall be as per
spesification 87
40.77 Exacavation in all sorts of soil for laying pipes upto 100mm dia including cum
forming bottom surface to required level, refilling seleted excavated earth
around the pipe in layers of 150mm thick, watering consolidating and disposing
off the surplus earath within the stie or as directed by the site engineer etc.
complete Depth upto 1.0m
40.78 Supply installation, testing and commissioning of fire alarm Main panel with15 Nos.
zone indication alaram etc. as required
40.79 Supplying Installing testing and commissioning approved make Centrifugal Nos.
pump end suction type couple to Electric mortor of suitable HP, fitted on a
common base frame and rated for Fire duty. including 2 nos. Pressure guages
fitted on suction & delivery side of the pump. The pums shall run on 400/440V,
3ph, 50Hz electric supply, Duty of pumps: 2850 Lpm @ 70.0m Head. Control
panel shall be per specification stated in Item No.87. (Cost of control pannel is
not included)
40.80 Supplying, Installing, testing and commisioning of fire hydrant multi stage Nos.
pump capable of delivering 2850Lpm @ 70.0m head coupled to water cooled
diesel engine of adequiate HP. It shall be fitted with a radiator on a common
base from with complete ancilalary units such as colling system, non return
Valve, Y strainer, fuel tank of adequate coapcity, Pressue guage, pressure
switch. Control panel shall be per specification stated in Item No.87. (Cost of
control pannel is not included)

40.81 Supplying, Installing, testing and commisioning electrically driven jockey pump Nos.
of capacity 180.0 Lpm at 70.0m head with all the necessary accessories viz.
Pressure guages etc. operating on 3Ph 50Hz, 400/440 V AC supply incldung
foudnation, bolts etc. complete Control panel shall be per specification stated
in Item No.87. (Cost of controle pannel is not included)

40.82 Supplying, Installing, testing and commissioning approved make Centrifugal Nos.
pump end suction type couple to Electric motor of suitable Hp, fitted on a
common base frame and rated for Fire duty. The quoted price shall aslso
include 2 nos. Pressure guages fitted on suction and delivery side of the pump.
The pumps shall run on 400/440V, 3ph, 35-Hz electric supply. Duty of pumps:
2850 Lpm @ 90.0m Head. Control panel shall be per specification stated in
Item No.87. (Cost of control pannel is not included)

40.83 Supplying Installing testing and commissiong COMMON Control panel for fire Nos.
fighting system consiting of electrical motor driven 60HP Main fire pump,
Diesel engine driven pump 60 HP Sprinkler pump 50HP & Jockey pump 25HP

40.84 Supplying, Installing, testing and commissioning approved make Centrifugal Nos.
pump end suction type couple to Electric motor of suitable Hp, fitted on a
common base frame and rated for Fire duty. The quoted price shall aslso
include 2 nos. Pressure guages fitted on suction & delivery side of the pump.
The pumps shall run on 400/440V, 3 ph, 50Hz electric supply. Duty of pums:
1620 Lpm @ 70.0m Head. Control panel shall be per specification stated in
Item No.87. (Cost of control pannel is not included)

40.85 Supplying, Installing testing and commissioning of fire hydrant multi stage Nos.
pump capable of delivering 1620 Lpm @ 70.0m head coupled to water colled
diesel enginer of adequate. HP. It shall be fitted with a radiator on a common
base frame with complete ancillary units such as colling sytem, non return
vialve, Y strainer, fuel tank of adequante capactiy, Pressure guage, pressure
switch etc. complete Control panel shall be per specification stated in Item
No.87. (Cost of control pannel is not included)

40.86 Supplying, Installing testing and commissioning electrically driven jockey pump Nos.
of capacity 180.0 Lpm at 70.0m. Head with all the necessary accessories viz.
Pressure guages etc., operating on 3Ph 50Hz, 400/440V AC supply including
foundatin, bolts etc. complete, Control panel shall be per specification stated in
Item No.87. (Cost of control pannel is not included)

40.87 FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of Each
63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop
valve, spindle and cast iron hand wheel. It has a female instantaneous outlet
with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a
flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as
per IS 5290 etc. complete Make : WINCO/NEW Age
40.88 Supplying Installing, testing and commissioning of 63mm mm dia double Each
headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle
and cast iron hand wheel. It has a 2 Nos female instantaneous outlet with
blank cap and is hydrostatically tested to 21 Kgf/cm2 pressure having a flow
rate of 900 LPM at 7 Kgf/cm2 of pressure confirms to IS : 2190 with blank cap
and wheel as per IS 5290 etc. complete

40.89 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE Each
VALVE SIZE OF 25mm dia complete
40.90 Supplying Installing, testing and commissioning of Gun metal Branch pipe size Each
of 63mm dia x19mm dia as per IS 903 Make: WINCO/NEW AGE complete

40.91 Supplying Installing, testing and commissioning of Reinforced Rubber Lined Each
RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of
male and Female Instantainious Gun metal coupling as per IS 903
WINCO/NEW AGE complete
40.92 Supplying Installing, testing and commissioning of Hose cabinet made out of Each
18 gauge M.S.sheet with double glass door with locing arrangement and
painted with two coats of Fire red Enamel paint at outer ise of the Box and two
coats of white enamel paint at inner side of the box is to accomodated 2 Nos.
of Fire hose box size 20”x24”x10” complete
40.93 Supplying Installing, testing and commissioning of Hose reel cabin Each
M.S.Pressed reel of 600mm dia swinging type motion which allows a 180°
swing and conforms to IS:884/85.
40.94 Supplying Installing, testing and commissioning of 19mm dia 36.50m length Each
hose with rubber lining smooth bore, reinforced of natural/ synthetic fibres, a
rubber cover finish shall be smooth, fluted or fabric marked with minimum
thickness of 1.50mm and to with stand a working pressure of 10Kgf/sqcm
confirms & tested as per IS 444
40.95 Supplying Installing, testing and commissioning of approved make 15mm dia Each
sprinkler bulb pendent/wall mounted type designed to operate 68 degrees
centegrad Make Tyco/HD FIRE complete (Colour code of bulb liquid inside
Glass bulb type Pendents As per IS 9972: 57°COrange, 68°C - Red, 79°C -
Yellow, 93°C - Green, 141°C - Blue, 182°C - Mauve, 227/260°C - Black)

40.96.1 Supplying Installing, testing and commissioning of hydraulicallying operated Unit

sprinkler cabit Valve with water meter gong bell and trims as required, pressure
gauges drain Valve, ball Valves check valve, strainer etc.-do-100 mm dia.
Complete
40.96.2 Supplying Installing, testing and commissioning of hydraulicallying operated Unit
sprinkler cabit Valve with water meter gong bell and trims as required, pressure
gauges drain Valve, ball Valves check valve, strainer etc.-do- 150 mm dia.
Complete
40.97.1 Supply, Installation testing and commissioning of approved make heavy M
quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc. -do- 200 mm dia.
complete

40.97.2 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc. -do- 150 mm dia.
complete
40.97.3 Supply, Installation testing and commissioning of approved make heavy M
quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc.-do- 100 mm dia.
complete

40.97.4 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc. -do- 80 mm dia.
complete

40.97.5 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc.-do- 65 mm dia.
complete

40.97.6 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc.-do- 50 mm dia.
complete

40.97.7 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc. -do- 40 mm dia.
complete

40.97.8 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc. -do- 32 mm dia.
complete

40.97.9 Supply, Installation testing and commissioning of approved make heavy M

quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check
nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on
walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats
of metal primer and two coats of Red enamel paint etc. -do- 25 mm dia.
complete

40.98.1 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion M
paint (Black) and two coats of Bituminous cloth.-do- 200 mm dia. Complete

40.98.2 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion M
paint (Black) and two coats of Bituminous cloth. -do- 150 mm dia. Complete

40.98.3 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion M
paint (Black) and two coats of Bituminous cloth. -do- 100 mm dia. Complete

40.98.4 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion M
paint (Black) and two coats of Bituminous cloth. -do- 80 mm dia. Complete
40.99.1 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. -do- Make Ravel/Golbe/Royale 12 Zone. complete

40.99.2 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. complete

40.99.3 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. -do- Make Ravel/Golbe/Royale 16 Zone. complete

40.99.4 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. -do- Make Ravel/Golbe/Royale 20 Zone. complete

40.99.5 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. -do- Make Ravel/Golbe/Royale 40 Zone. complete

40.99.6 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. -do- Make Ravel/Golbe/Royale 60 Zone. complete

40.99.7 Supplying Installation testing and Commissiong of Micro precess base Fire Each
alram Control panel having power regulation Circuit, which conner to 230 AC to
@$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button
switches, Test facility also with work test facility arrangement, provided in the
panel. All this electronic circuits componets are assembled in M.S.16 gauge
suitable panel cabinet with glass Fraonted and locking arrangements including
cost of all mateials etc. -do- Make Ravel/Golbe/Royale 76 Zone. complete
40.100 Supplying Installing, testing and commissioning of Smoke/Heat detector Photo Each
electric type detctor with base LED indicator on Smioke detector fixed cum rise
temperature type heat detector with base Make Applow/ System Sensor
complete
40.101 Supplying Installing, testing and commissioning of Manual Call point : It Each
consists of Micro push button switch with LED and circutary etc. works on 24V
DC LED indicator with glass Fronted, Also with hammer for breaking the glass
incase of Fire. Accomdated in 75x75x30mm size M.S.16 gauge red enamel
painted box Make/Golbe/Ravel/Royale. complete
40.102 Supplying Installing, testing and commissioning of electronic Hooter, it conists Each
of electronic circuit to give dual Fire alaram sound with works 24V DC with
speaker all encosed in suitable in M.S. 16 gauge red painted box. Complete

40.103 Supplying Installing, testing and commissioning of Response Indictor constists Each
of twin LED wioth electronic circutarx work on 24 DC enclose in PVC
retangular. Complete
40.104 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with Each
necessary holes for cable/conduit entry as required with one coat of primer of
approved make etc.
40.105 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic M
grade copper with flexible copper conductor confirming to table 3 class 5 of
IS:8130-1984 and PVC insulation and sheathed suitable for working voltage
upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-B. 2C x 1.5
SqmmV
40.106 SITC of 7AM-12 V Battery for fire alaram system Make EXIDE/AMCo Each
40.107 Providing and Fixing Fire force board size of 3’x2’ made out to Acrylic sheet of Each
3mm thick with letter of different Colums with 8mm thick ply wood, Alumimum
side frame and fixing etc. Complete
40.108 Supplying Installing, testing and commissioning of Public address system (Two Each
way comminication type) as per requirement of Fire Force authority and which
Generally comprise of Supplying Installing, testing and commissioning of
Approved make 5 W.wall mounted speaker with talk back facility with store
enamel painted M.S.Sheet hosing etc. complete
40.109.1 Supplying Installing, testing and commissioning of P.A.System console panel Each
with push button with speaker and indictoron Accomdated in M.S.Cabinet with
painting -do- 20 Zone cansole. Complete
40.109.2 Supplying Installing, testing and commissioning of P.A.System console panel Each
with push button with speaker and indictoron Accomdated in M.S.Cabinet with
painting -do- 40 Zone cansole. Complete
40.109.3 Supplying Installing, testing and commissioning of P.A.System console panel Each
with push button with speaker and indictoron Accomdated in M.S.Cabinet with
painting -do- 60 Zone cansole. Complete
40.110 P.A.System amplifier 250W RMS out put with complete wiring and controls Each
accessable form front Make AHUJA. Complete
40.111 Supplying Installing, testing and commissioning of Ahuja make MIKE suitable Each
to I.A.System. Complete
40.112 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic M
grade flexible copper with low conductor confirming to table 3 class 5 of
IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working
voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A.
2C x 1.50 Sqmm
40.113 Supplying of four bucket stand alongwith buckets. Complete Each
40.114 Supplying of two bucket stand alongwith buckets. Complete Each
40.115 Supplying of Hand gloves. Complete Pair
40.116 Supplying of first aid box. Complete Each
40.117 Supplying of SAFETY MASK. Complete Each
40.118 Supplying of FIRST AID CHART with lamination. Complete Each
 40.119 Supplying and installation of RUBBER MAT 1mtr x 1mtr -10mm thick. Nos.
Complete
40.120.1 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 200 mm dia. complete

40.120.2 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes-do- Galvanized Iron Pipes 150 mm dia. complete two coats of metal
primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 150
mm dia. complete

40.120.3 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 100 mm dia. complete

40.120.4 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 80 mm dia. complete
40.120.5 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 65 mm dia. complete

40.120.6 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 50 mm dia. complete

40.120.7 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 40 mm dia. complete

40.120.8 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 32 mm dia. complete
40.120.9 Supply, Installation testing and commissioning of approved make heavy tubes M
(Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm
thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm
Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick
@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm
Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick
@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as
Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding,
Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work
includes two coats of metal primer and two coats of Red enamel paint etc.-do-
Galvanized Iron Pipes 25 mm dia. complete
Basic Rate
2,298.00

3,447.00

4,788.00

5,819.00
7,661.00

4,420.00

6,188.00

7,661.00
12,571.00

29,464.00

10,803.00

16,597.00
 5,304.00

8,250.00

13,848.00

10,607.00
14,732.00

20,625.00

23,571.00

35,357.00
53,036.00

16,205.00

32,213.00

45,571.00

41,838.00
66,785.00

23,079.00

40,758.00

66,490.00

44,196.00
54,017.00

54,214.00

11,097.00

16,303.00

9,723.00
14,732.00

41,250.00

9,723.00

14,143.00

7,267.00
26,518.00

6,874.00

23,571.00

21,017.00

25,142.00
33,687.00

14,731.00

13,259.00

25,142.00
 97,232.00

117,857.00

135,536.00
153,214.00

88,393.00

106,071.00
120,804.00

153,214.00

37,420.00

3,832.00

9,723.00
12,964.00

3,832.00

22,098.00

4,035.00

3,041.00

1.00

2.00

1.00
 6.00

7.50

1.90

15,911.00

113,041.00

95,159.00
187,500.00

79,018.00

219.00

71,429.00

257,143.00
491,071.00

74,084.00

291,225.00

223,214.00

257,143.00

312,500.00

95,159.00

6,293.00
10,125.00

1,875.00

2,679.00

6,291.00

3,839.00

4,286.00

4,643.00

446.00

714.00

1,339.00

1,988.00

1,616.00
1,230.00

979.00

865.00

763.00

654.00

618.00

571.00

321.00

223.00

179.00

134.00
 16,071.00

21,429.00

31,250.00

44,643.00

93,750.00

132,143.00

165,179.00
 3,041.00

1,071.00

1,607.00

268.00

86.00

29.00

1,071.00
2,634.00

2,054.00

42,857.00

84,821.00

111,607.00

28,571.00

1,339.00

33.00

1,071.00
563.00
152.00
192.00
57.00
201.00
 987.00

2,179.00

2,106.00

1,890.00

1,268.00
1,131.00

993.00

878.00

820.00
762.00
Item No. Description Unit
41.1 WALL INSULATION EXTERNAL WALL INSULATION WITH POLYURETHANE Sqm
FOAM (PUF) SLAB Providing and fixing polyurethane foam (PUF) slab 40mm
thick average with PU slab density 36+/-2 kg/m3 for external wall insulation
including necessary polymerized plaster reinforced with glass fibre mesh,
epoxy based bonding adhesive etc., complete with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM etc., complete as per direction of engineer incharge of
the work.

41.2.1 EXTERNAL WALL INSULATION WITH POLYURETHANE FOAM (PUF) Sqm

SPRAY Providing and fixing cast in situ polyurethane foam (PUF) spray with
PU foam spray density 35+/-5 kg/m3 for external wall insulation including
necessary adhesive etc., complete with all lead and lift, transportation charges,
loading unloading charges ,all taxes, cost of all materials, labour, HOM
complete as per direction of engineer incharge of the work. Polyurethane foam
(PUF) spray 40mm thick

41.2.2 EXTERNAL WALL INSULATION WITH POLYURETHANE FOAM (PUF) Sqm

SPRAY Providing and fixing cast in situ polyurethane foam (PUF) spray with
PU foam spray density 35+/-5 kg/m3 for external wall insulation including
necessary adhesive etc., complete with all lead and lift, transportation charges,
loading unloading charges ,all taxes, cost of all materials, labour, HOM
complete as per direction of engineer incharge of the work. Polyurethane foam
(PUF) spray 50mm thick

41.3.1 EXTERNAL WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

THERMAL INSULATING BOARDS Providing and fixing EXTRUDED
POLYSTYRENE (XPS) thermal insulating boards for external wall insulation
including necessary fasteners etc., complete with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded Polystyrene (XPS) thermal insulating boards 25mm thick

41.3.2 EXTERNAL WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

THERMAL INSULATING BOARDS Providing and fixing EXTRUDED
POLYSTYRENE (XPS) thermal insulating boards for external wall insulation
including necessary fasteners etc., complete with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded Polystyrene (XPS) thermal insulating boards 50mm thick

41.3.3 EXTERNAL WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

THERMAL INSULATING BOARDS Providing and fixing EXTRUDED
POLYSTYRENE (XPS) thermal insulating boards for external wall insulation
including necessary fasteners etc., complete with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded Polystyrene (XPS) thermal insulating boards 75mm thick

41.3.4 EXTERNAL WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

THERMAL INSULATING BOARDS Providing and fixing EXTRUDED
POLYSTYRENE (XPS) thermal insulating boards for external wall insulation
including necessary fasteners etc., complete with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded Polystyrene (XPS) thermal insulating boards 1OOmm thick
41.4.1 CAVITY WALL INSULATION WITH POLYURETHANE FOAM (PUF) SPRAY Sqm
Providing and fixing polyurethane foam (PUF) spray with PU foam spray
having density 35+/-5 kg/cum density for insulatiom of cavity wall with including
necessary fasteners etc. , complete with all lead and lift, transportation
charges, loading unloading charges, all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work Polyurethane
foam (PUF) spray with PU foam 40mm thick

41.4.2 CAVITY WALL INSULATION WITH POLYURETHANE FOAM (PUF) SPRAY Sqm
Providing and fixing polyurethane foam (PUF) spray with PU foam spray
having density 35+/-5 kg/cum density for insulatiom of cavity wall with including
necessary fasteners etc. , complete with all lead and lift, transportation
charges, loading unloading charges, all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work Polyurethane
foam (PUF) spray with PU foam 50mm thick

41.5.1 CAVITY WALL INSULATION WITH GLASS WOOL SLAB Providing and fixing Sqm
glass wool slab- resin bonded with density 48kg/ cum for insulation of cavity
wall, fixed using Gl wire 200 SWG, Gl chicken mesh 12.50mm x 24 SWG
including necessary criss-cross Gl wire mesh,raw plugs, adhesive etc.,
complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Glass wool slab 12mm thick resin bonded
slab

41.5.2 CAVITY WALL INSULATION WITH GLASS WOOL SLAB Providing and fixing Sqm
glass wool slab- resin bonded with density 48kg/ cum for insulation of cavity
wall, fixed using Gl wire 200 SWG, Gl chicken mesh 12.50mm x 24 SWG
including necessary criss-cross Gl wire mesh,raw plugs, adhesive etc.,
complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Glass wool slab 25mm thick resin bonded
slab

41.5.3 CAVITY WALL INSULATION WITH GLASS WOOL SLAB Providing and fixing Sqm
glass wool slab- resin bonded with density 48kg/ cum for insulation of cavity
wall, fixed using Gl wire 200 SWG, Gl chicken mesh 12.50mm x 24 SWG
including necessary criss-cross Gl wire mesh,raw plugs, adhesive etc.,
complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Glass wool slab 50mm thick resin bonded
slab

41.6.1 CAVITY WALL INSULATION WITH ROCK WOOL SLAB Providing and fixing Sqm
rock wool slab - resin bonded rock wool having density 36+/-5 kg/cum for
insulation of cavity wall with including necessary criss-cross Gl wire, mesh,raw
plugs, adhesive etc., with all lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all materials, labour, HOM complete as
per direction of engineer incharge of the work. Rock wool slab 25mm thick
resin bonded rock wool slab

41.6.2 CAVITY WALL INSULATION WITH ROCK WOOL SLAB Providing and fixing Sqm
rock wool slab - resin bonded rock wool having density 36+/-5 kg/cum for
insulation of cavity wall with including necessary criss-cross Gl wire, mesh,raw
plugs, adhesive etc., with all lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all materials, labour, HOM complete as
per direction of engineer incharge of the work. Rock wool slab 40mm thick
resin bonded rock wool slab
41.6.3 CAVITY WALL INSULATION WITH ROCK WOOL SLAB Providing and fixing Sqm
rock wool slab - resin bonded rock wool having density 36+/-5 kg/cum for
insulation of cavity wall with including necessary criss-cross Gl wire, mesh,raw
plugs, adhesive etc., with all lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all materials, labour, HOM complete as
per direction of engineer incharge of the work. Rock wool slab 50mm thick
resin bonded rock wool slab

41.6.4 CAVITY WALL INSULATION WITH ROCK WOOL SLAB Providing and fixing Sqm
rock wool slab - resin bonded rock wool having density 36+/-5 kg/cum for
insulation of cavity wall with including necessary criss-cross Gl wire, mesh,raw
plugs, adhesive etc., with all lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all materials, labour, HOM complete as
per direction of engineer incharge of the work. Rock wool slab 65mm thick
resin bonded rock wool slab

41.6.5 CAVITY WALL INSULATION WITH ROCK WOOL SLAB Providing and fixing Sqm
rock wool slab - resin bonded rock wool having density 36+/-5 kg/cum for
insulation of cavity wall with including necessary criss-cross Gl wire, mesh,raw
plugs, adhesive etc., with all lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all materials, labour, HOM complete as
per direction of engineer incharge of the work. Rock wool slab 75mm thick
resin bonded rock wool slab

41.6.6 CAVITY WALL INSULATION WITH ROCK WOOL SLAB Providing and fixing Sqm
rock wool slab - resin bonded rock wool having density 36+/-5 kg/cum for
insulation of cavity wall with including necessary criss-cross Gl wire, mesh,raw
plugs, adhesive etc., with all lead and lift, transportation charges, loading
unloading charges, all taxes, cost of all materials, labour, HOM complete as
per direction of engineer incharge of the work. Rock wool slab 1OOmm thick
resin bonded rock wool slab

41.7.1 CAVITY WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

Providing and fixing extruded polystyrene (XPS) thermal insulating boards
having density 36+/-5 kg/cum for insulation of cavity wall including necessary
criss-cross Gl wire, mesh,raw plugs, adhesive etc., with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded polystyrene (XPS) 50mm thick thermal insulating boards

41.7.2 CAVITY WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

Providing and fixing extruded polystyrene (XPS) thermal insulating boards
having density 36+/-5 kg/cum for insulation of cavity wall including necessary
criss-cross Gl wire, mesh,raw plugs, adhesive etc., with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded polystyrene (XPS) 60mm thick thermal insulating boards

41.7.3 CAVITY WALL INSULATION WITH EXTRUDED POLYSTYRENE (XPS) Sqm

Providing and fixing extruded polystyrene (XPS) thermal insulating boards
having density 36+/-5 kg/cum for insulation of cavity wall including necessary
criss-cross Gl wire, mesh,raw plugs, adhesive etc., with all lead and lift,
transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work. Extruded polystyrene (XPS) 70mm thick thermal insulating boards
41.7.4 Providing and fixing extruded polystyrene (XPS) 25mm thick thermal insulating Sqm
boards having density 32 kg/cum for insulation of cavity wall including
necessary criss-cross Gl wire, mesh, rawI plugs, adhesive etc., with all lead
and lift, transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work.

41.7.5 Providing and fixing extruded polystyrene (XPS) 50mm thick thermal insulating Sqm
boards having density 32 kg/cum for insulation of cavity wall including
necessary criss-cross Gl wire, mesh, rawI plugs, adhesive etc., with all lead
and lift, transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work.

41.7.6 Providing and fixing extruded polystyrene (XPS) 75mm thick thermal insulating Sqm
boards having dentity 32 kg/cum for insulation of cavity wall including
necessary criss-cross Gl wire, mesh, rawI plugs, adhesive etc., with all lead
and lift, transportation charges, loading unloading charges, all taxes, cost of all
materials, labour, HOM complete as per direction of engineer incharge of the
work.

41.7.7 Providing and fixing extruded polystyrene (XPS) 1OOmm thick thermal Sqm
insulating boards having dentity 32 kg/cum for insulation of cavity wall
including necessary criss-cross Gl wire, mesh, rawI plugs, adhesive etc., with
all lead and lift, transportation charges, loading unloading charges, all taxes,
cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work.

41.8.1 ROOF INSULATION OVER DECK INSULATION WITH POLYURETHANE Sqm

FOAM (PUF) SLAB Providing and fixing polyurethane foam (PUF) slab with PU
slab density 36+/-2 kg/m3 insulation for over deck covered with two layers of
40mm thick cement concrete screed with mix proportion 1:1.5:3 (M20grade)
using 12.50mm nominal size aggregates and top layer of 1Omm thick plaster
with cement mortar 1:3 finished with floating coat of neat cement, including
necessary polymerized plaster reinforced with glass fibre mesh for PUF slab,
epoxy bases bonding adhesive etc., with all lead and lift, transportation
charges, loading unloading charges, all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Polyurethane
foam (PUF) slab 40mm thick

41.8.2 ROOF INSULATION OVER DECK INSULATION WITH POLYURETHANE Sqm

FOAM (PUF) SLAB Providing and fixing polyurethane foam (PUF) slab with PU
slab density 36+/-2 kg/m3 insulation for over deck covered with two layers of
40mm thick cement concrete screed with mix proportion 1:1.5:3 (M20grade)
using 12.50mm nominal size aggregates and top layer of 1Omm thick plaster
with cement mortar 1:3 finished with floating coat of neat cement, including
necessary polymerized plaster reinforced with glass fibre mesh for PUF slab,
epoxy bases bonding adhesive etc., with all lead and lift, transportation
charges, loading unloading charges, all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Polyurethane
foam (PUF) slab 50mm thick

41.8.3 ROOF INSULATION OVER DECK INSULATION WITH POLYURETHANE Sqm

FOAM (PUF) SLAB Providing and fixing polyurethane foam (PUF) slab with PU
slab density 36+/-2 kg/m3 insulation for over deck covered with two layers of
40mm thick cement concrete screed with mix proportion 1:1.5:3 (M20grade)
using 12.50mm nominal size aggregates and top layer of 1Omm thick plaster
with cement mortar 1:3 finished with floating coat of neat cement, including
necessary polymerized plaster reinforced with glass fibre mesh for PUF slab,
epoxy bases bonding adhesive etc., with all lead and lift, transportation
charges, loading unloading charges, all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Polyurethane
foam (PUF) slab 60mm thick
41.8.4 ROOF INSULATION OVER DECK INSULATION WITH POLYURETHANE Sqm
FOAM (PUF) SLAB Providing and fixing polyurethane foam (PUF) slab with PU
slab density 36+/-2 kg/m3 insulation for over deck covered with two layers of
40mm thick cement concrete screed with mix proportion 1:1.5:3 (M20grade)
using 12.50mm nominal size aggregates and top layer of 1Omm thick plaster
with cement mortar 1:3 finished with floating coat of neat cement, including
necessary polymerized plaster reinforced with glass fibre mesh for PUF slab,
epoxy bases bonding adhesive etc., with all lead and lift, transportation
charges, loading unloading charges, all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Polyurethane
foam (PUF) slab 70mm thick

41.9.1 OVER DECK INSULATION WITH POLYURETHANE FOAM (PUF) SPRAY Sqm
Providing and fixing Over deck insulation with cast insitu polyurethane foam
(PUF) spray with PU foam spray including necessary fasteners etc., complete
covered with two layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary OVer deck insulation with
polyurethane foam (PUF) spray 40mm thick

41.9.2 OVER DECK INSULATION WITH POLYURETHANE FOAM (PUF) SPRAY Sqm
Providing and fixing Over deck insulation with cast insitu polyurethane foam
(PUF) spray with PU foam spray including necessary fasteners etc., complete
covered with two layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary OVer deck insulation with
polyurethane foam (PUF) spray 50mm thick

41.9.3 OVER DECK INSULATION WITH POLYURETHANE FOAM (PUF) SPRAY Sqm
Providing and fixing Over deck insulation with cast insitu polyurethane foam
(PUF) spray with PU foam spray including necessary fasteners etc., complete
covered with two layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary OVer deck insulation with
polyurethane foam (PUF) spray 60mm thick

41.9.4 OVER DECK INSULATION WITH POLYURETHANE FOAM (PUF) SPRAY Sqm
Providing and fixing Over deck insulation with cast insitu polyurethane foam
(PUF) spray with PU foam spray including necessary fasteners etc., complete
covered with two layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary OVer deck insulation with
polyurethane foam (PUF) spray 70mm thick

41.10.1 UNDER DECK INSULATION WITH EXPANDED POLYSTYRENE (EPS) Sqm

Providing and fixing expanded polystyrene (EPS) board using aluminium strips
20mm wide for under deck thermal insulation including necessary fasteners
etc., complete (excluding cost of screed concrete which is to be measured and
paid seperately) with all lead and lift, transportation charges, loading unloading
charges ,all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 50mm thick
41.10.2 UNDER DECK INSULATION WITH EXPANDED POLYSTYRENE (EPS) Sqm
Providing and fixing expanded polystyrene (EPS) board using aluminium strips
20mm wide for under deck thermal insulation including necessary fasteners
etc., complete (excluding cost of screed concrete which is to be measured and
paid seperately) with all lead and lift, transportation charges, loading unloading
charges ,all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 70mm thick

41.10.3 UNDER DECK INSULATION WITH EXPANDED POLYSTYRENE (EPS) Sqm

Providing and fixing expanded polystyrene (EPS) board using aluminium strips
20mm wide for under deck thermal insulation including necessary fasteners
etc., complete (excluding cost of screed concrete which is to be measured and
paid seperately) with all lead and lift, transportation charges, loading unloading
charges ,all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 90mm thick

41.10.4 UNDER DECK INSULATION WITH EXPANDED POLYSTYRENE (EPS) Sqm

Providing and fixing expanded polystyrene (EPS) board using aluminium strips
20mm wide for under deck thermal insulation including necessary fasteners
etc., complete (excluding cost of screed concrete which is to be measured and
paid seperately) with all lead and lift, transportation charges, loading unloading
charges ,all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 11Omm thick

41.10.5 UNDER DECK INSULATION WITH EXPANDED POLYSTYRENE (EPS) Sqm

Providing and fixing expanded polystyrene (EPS) board using aluminium strips
20mm wide for under deck thermal insulation including necessary fasteners
etc., complete (excluding cost of screed concrete which is to be measured and
paid seperately) with all lead and lift, transportation charges, loading unloading
charges ,all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 120mm thick

41.10.6 Providing and fixing expanded polystyrene (EPS) 30mm thick with density 20 Sqm
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.

41.10.7 Providing and fixing expanded polystyrene (EPS) 40mm thick w ith density 20 Sqm
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.

41.10.8 Providing and fixing expanded polystyrene (EPS) 60mm thick with density 20 Sqm
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.

41.10.9 Providing and fixing expanded polystyrene (EPS) 75mm thick with density 20 Sqm
kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.
41.10.10 Providing and fixing expanded polystyrene (EPS) 1OOmm thick with density Sqm
20 kg/m3 for under deck thermal insulation including necessary fasteners etc.,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work.

41.11.1 THERMAL INSULATION OF ROOF WITH EXPANDED POLYSTYRENE Sqm

Providing and fixing expanded polystyrene with aluminium strips at every
600mm c/c over existing false ceiling for thermal insulation of roofing including
necessary fasteners etc., complete (excluding cost of screed concrete which is
to be measured and paid seperately) with all lead and lift, transportation
charges, loading unloading charges ,all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Expanded
polystyrene (EPS) 50mm thick

41.11.2 THERMAL INSULATION OF ROOF WITH EXPANDED POLYSTYRENE Sqm

Providing and fixing expanded polystyrene with aluminium strips at every
600mm c/c over existing false ceiling for thermal insulation of roofing including
necessary fasteners etc., complete (excluding cost of screed concrete which is
to be measured and paid seperately) with all lead and lift, transportation
charges, loading unloading charges ,all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Expanded
polystyrene (EPS) 70mm thick

41.11.3 THERMAL INSULATION OF ROOF WITH EXPANDED POLYSTYRENE Sqm

Providing and fixing expanded polystyrene with aluminium strips at every
600mm c/c over existing false ceiling for thermal insulation of roofing including
necessary fasteners etc., complete (excluding cost of screed concrete which is
to be measured and paid seperately) with all lead and lift, transportation
charges, loading unloading charges ,all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Expanded
polystyrene (EPS) 90mm thick

41.11.4 THERMAL INSULATION OF ROOF WITH EXPANDED POLYSTYRENE Sqm

Providing and fixing expanded polystyrene with aluminium strips at every
600mm c/c over existing false ceiling for thermal insulation of roofing including
necessary fasteners etc., complete (excluding cost of screed concrete which is
to be measured and paid seperately) with all lead and lift, transportation
charges, loading unloading charges ,all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Expanded
polystyrene (EPS) 11Omm thick

41.11.5 THERMAL INSULATION OF ROOF WITH EXPANDED POLYSTYRENE Sqm

Providing and fixing expanded polystyrene with aluminium strips at every
600mm c/c over existing false ceiling for thermal insulation of roofing including
necessary fasteners etc., complete (excluding cost of screed concrete which is
to be measured and paid seperately) with all lead and lift, transportation
charges, loading unloading charges ,all taxes, cost of all materials, labour,
HOM complete as per direction of engineer incharge of the work. Expanded
polystyrene (EPS) 120mm thick
41.12.1 OVER DECK THERMAL INSULATION OF ROOF WITH EXPANDED Sqm
POLYSTYRENE Providing and fixing expanded polystyrene (50mm thick) for
over deck thermal insulation of roofing including necessary fasterners etc.,
complete covered with two layers of 40mm thick cement concrete screed with
mix proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates
and top layer of 1Omm thick plaster with cement mortar 1:3 finished with
floating coat of neat cement, including necessary polymerized plaster
reinforced with glass fibre mesh for PUF slab, epoxy based bonding adhesive
etc., complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 50mm thick

41.12.2 OVER DECK THERMAL INSULATION OF ROOF WITH EXPANDED Sqm

POLYSTYRENE Providing and fixing expanded polystyrene (50mm thick) for
over deck thermal insulation of roofing including necessary fasterners etc.,
complete covered with two layers of 40mm thick cement concrete screed with
mix proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates
and top layer of 1Omm thick plaster with cement mortar 1:3 finished with
floating coat of neat cement, including necessary polymerized plaster
reinforced with glass fibre mesh for PUF slab, epoxy based bonding adhesive
etc., complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 70mm thick

41.12.3 OVER DECK THERMAL INSULATION OF ROOF WITH EXPANDED Sqm

POLYSTYRENE Providing and fixing expanded polystyrene (50mm thick) for
over deck thermal insulation of roofing including necessary fasterners etc.,
complete covered with two layers of 40mm thick cement concrete screed with
mix proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates
and top layer of 1Omm thick plaster with cement mortar 1:3 finished with
floating coat of neat cement, including necessary polymerized plaster
reinforced with glass fibre mesh for PUF slab, epoxy based bonding adhesive
etc., complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 90mm thick

41.12.4 OVER DECK THERMAL INSULATION OF ROOF WITH EXPANDED Sqm

POLYSTYRENE Providing and fixing expanded polystyrene (50mm thick) for
over deck thermal insulation of roofing including necessary fasterners etc.,
complete covered with two layers of 40mm thick cement concrete screed with
mix proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates
and top layer of 1Omm thick plaster with cement mortar 1:3 finished with
floating coat of neat cement, including necessary polymerized plaster
reinforced with glass fibre mesh for PUF slab, epoxy based bonding adhesive
etc., complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 11Omm thick
41.12.5 OVER DECK THERMAL INSULATION OF ROOF WITH EXPANDED Sqm
POLYSTYRENE Providing and fixing expanded polystyrene (50mm thick) for
over deck thermal insulation of roofing including necessary fasterners etc.,
complete covered with two layers of 40mm thick cement concrete screed with
mix proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates
and top layer of 1Omm thick plaster with cement mortar 1:3 finished with
floating coat of neat cement, including necessary polymerized plaster
reinforced with glass fibre mesh for PUF slab, epoxy based bonding adhesive
etc., complete with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. Expanded polystyrene (EPS) 120mm thick

41.13.1 OVER DECK WITH GLASS WOOL Providing and fixing resin bonded glass Sqm
wool slab having density 48kgs/cum for over deck insulation of roofing with
glass wool including necessary fasteners,GI wire & mesh etc., complete
covered with one layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary polymerized plaster reinforced with
glass fibre mesh for PUF slab, epoxy based bonding adhesive etc., complete
with all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work. Glass wool slab 12mm thick

41.13.2 OVER DECK WITH GLASS WOOL Providing and fixing resin bonded glass Sqm
wool slab having density 48kgs/cum for over deck insulation of roofing with
glass wool including necessary fasteners,GI wire & mesh etc., complete
covered with one layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary polymerized plaster reinforced with
glass fibre mesh for PUF slab, epoxy based bonding adhesive etc., complete
with all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work. Glass wool slab 25mm thick

41.13.4 OVER DECK WITH GLASS WOOL Providing and fixing resin bonded glass Sqm
wool slab having density 48kgs/cum for over deck insulation of roofing with
glass wool including necessary fasteners,GI wire & mesh etc., complete
covered with one layers of 40mm thick cement concrete screed with mix
proportion 1:1.5:3 (M20grade) using 12.50mm nominal size aggregates and
top layer of 1Omm thick plaster with cement mortar 1:3 finished with floating
coat of neat cement, including necessary polymerized plaster reinforced with
glass fibre mesh for PUF slab, epoxy based bonding adhesive etc., complete
with all lead and lift, transportation charges, loading unloading charges, all
taxes, cost of all materials, labour, HOM complete as per direction of engineer
incharge of the work. Glass wool slab 50mm thick

41.14.1 OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm Sqm
resin bonded rock wool slab having density 48kgs/cum for over deck insulation
of roofing including necessary fasteners,GI wire & mesh etc., complete
(excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 25mm thick
41.14.2 OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm Sqm
resin bonded rock wool slab having density 48kgs/cum for over deck insulation
of roofing including necessary fasteners,GI wire & mesh etc., complete
(excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 40mm thick

41.14.3 OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm Sqm
resin bonded rock wool slab having density 48kgs/cum for over deck insulation
of roofing including necessary fasteners,GI wire & mesh etc., complete
(excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 50mm thick

41.14.4 OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm Sqm
resin bonded rock wool slab having density 48kgs/cum for over deck insulation
of roofing including necessary fasteners,GI wire & mesh etc., complete
(excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 65mm thick

41.14.5 OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm Sqm
resin bonded rock wool slab having density 48kgs/cum for over deck insulation
of roofing including necessary fasteners,GI wire & mesh etc., complete
(excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 75mm thick

41.14.6 OVER DECK WITH ROCK WOOL Providing and fixing ROCK wool 25mm Sqm
resin bonded rock wool slab having density 48kgs/cum for over deck insulation
of roofing including necessary fasteners,GI wire & mesh etc., complete
(excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM complete as per direction
of engineer incharge of the work. ROCK wool slab 1OOmm thick

41.15.1 UNDER DECK INSULATION WITH GLASS WOOL Providing and fixing glass Sqm
wool resin bonded glass wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc. ,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM scaffolding etc. , complete
Glass wool slab 25mm thick

41.15.2 UNDER DECK INSULATION WITH GLASS WOOL Providing and fixing glass Sqm
wool resin bonded glass wool slab having density 48kgs/cum for under deck
insulation of roofing including necessary fasteners,GI wire & mesh etc. ,
complete (excluding cost of screed concrete which is to be measured and paid
seperately) with all lead and lift, transportation charges, loading unloading
charges, all taxes, cost of all materials, labour, HOM scaffolding etc. , complete
Glass wool slab 40mm thick
41.16.1 UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool resin Sqm
bonded rock wool slab having density 48kgs/cum for under deck insulation of
roofing including necessary fasteners,GI wire & mesh etc., complete with all
lead and lift, transportation charges, loading unloading charges ,all taxes, cost
of all materials, labour, HOM scaffolding etc., complete ROCK wool slab 25mm
thick

41.16.2 UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool resin Sqm
bonded rock wool slab having density 48kgs/cum for under deck insulation of
roofing including necessary fasteners,GI wire & mesh etc., complete with all
lead and lift, transportation charges, loading unloading charges ,all taxes, cost
of all materials, labour, HOM scaffolding etc., complete ROCK wool slab 40mm
thick

41.16.3 UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool resin Sqm
bonded rock wool slab having density 48kgs/cum for under deck insulation of
roofing including necessary fasteners,GI wire & mesh etc., complete with all
lead and lift, transportation charges, loading unloading charges ,all taxes, cost
of all materials, labour, HOM scaffolding etc., complete ROCK wool slab 50mm
thick

41.16.4 UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool resin Sqm
bonded rock wool slab having density 48kgs/cum for under deck insulation of
roofing including necessary fasteners,GI wire & mesh etc., complete with all
lead and lift, transportation charges, loading unloading charges ,all taxes, cost
of all materials, labour, HOM scaffolding etc., complete ROCK wool slab 65mm
thick

41.16.5 UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool resin Sqm
bonded rock wool slab having density 48kgs/cum for under deck insulation of
roofing including necessary fasteners,GI wire & mesh etc., complete with all
lead and lift, transportation charges, loading unloading charges ,all taxes, cost
of all materials, labour, HOM scaffolding etc., complete ROCK wool slab 75mm
thick

41.16.6 UNDER DECK WITH ROCK WOOL Providing and fixing ROCK wool resin Sqm
bonded rock wool slab having density 48kgs/cum for under deck insulation of
roofing including necessary fasteners,GI wire & mesh etc., complete with all
lead and lift, transportation charges, loading unloading charges ,all taxes, cost
of all materials, labour, HOM scaffolding etc., complete ROCK wool slab
1OOmm thick
Basic Rate
1,427.00

989.00

1,162.00

449.00

738.00

1,027.00

1,317.00
 886.00

1,166.00

451.00

616.00

745.00

375.00

420.00
 435.00

475.00

510.00

710.00

1,056.00

1,236.00

1,273.00
 617.00

927.00

1,237.00

1,547.00

1,460.00

1,815.00

2,064.00
2,976.00

2,004.00

2,163.00

2,745.00

3,327.00

667.00
 820.00

973.00

1,123.00

1,199.00

515.00

589.00

744.00

859.00
1,048.00

594.00

698.00

808.00

934.00

917.00
1,604.00

1,695.00

1,786.00

1,891.00
1,912.00

1,174.00

1,349.00

1,500.00

565.00
 603.00

626.00

666.00

692.00

759.00

898.00

1,075.00
585.00

628.00

655.00

703.00

733.00

812.00