Safety and Relief Valves

for Industrial and

Commercial Applications.

Kunkle Safety and Relief Valve

Products Overview
 Kunkle
Safety and
Relief Valve
Products
Overview

Contents Performance
Models 1 and 2 Brass Safety Valves 3 Kunkle Valve is a leading supplier of The breadth of the Kunkle Valve
Safety and Relief Valve Products for product offering is second to none in
Models 19, 19M, 20, 20M, 20P,
3 industrial and commercial applications, terms of industrial and commercial
20MP, 200A and 200H
such as steam boilers, air, or non- safety and relief valve products.
Model 30 3
hazardous gases. Kunkle products are Products range in size from ¼” NPT to
Models 40R, 40RL 4 available with certification to ASME 6” flange and are suitable for services
Models 71S, 171, 171P and 171S 4 Section I, Section IV, and Section VIII. In ranging from cryogenic to 850°F, at
Models 91, 218 and 228 4 addition, Kunkle Valve offers a range of pressures ranging from vacuum to
non-code products. 7500 psig. Tri-Clover and BSP threads
Models 218, 228 5
available on selected models.
Model 140 5
Models 189, 363 and 389 5
Models 215V and 337 6
Model 338 Blower Relief Valve 6
Models 230, 330, 330S and 333S 7
Models 264, 265, 266,
267,264P, 265P, 266P and 267P 7
Models 300 and 600 7
Model 299 8
Model 537 8
Models 541, 542 and 548 8
Model 900 Series 9
Model 930 9
Series 6000 10
Models 6252 and 6254 10

2
Safety and Relief
Valves

Bronze Safety Valves For Air, Gas and Bronze Relief Valves For Liquid Service Brass Safety Relief Valve For Air and
Steam Service Model: Gas Service
Model: Models 19, 20 and 200 Model:
Models 1 and 2 Features: Model 30
Features: Extra heavy, rugged construction. Both inlet Features:
Compact assembly allows minimum space and outlet connections are cast integral Top-guided disc provides optimum
requirements. Precision lapped, metal- with body to permit easy inspection and performance.
to-metal beveled seat provides premium servicing without disconnecting piping. Sizes:
shutoff. Adjustable blowdown for precise Seats lapped for optimum performance. ¼” (7 mm)
opening, with minimum preopen or simmer, Spherical pivot between disc and spring Press/Temp Limits:
and exact blowdown control. Available in corrects misalignment and compensates for 4000 psig (276 barg)/300°F (150°C)
top or side outlet. Nickel plating for use spring side thrust. Applications:
on institutional equipment and vibration Sizes: • Small to medium size, multi-stage, air
dampener on lift lever both available. ½” to 3” (15 to 80 mm) compressors, intercoolers, aftercoolers,
Sizes: Press/Temp Limits: instrument/control air lines and systems.
½”, ¾” and 1” (15, 18 and 25 mm)
500 psig (20.7 barg)/406°F (208°C) • Air tanks/receivers and pressurized
Press/Temp Limits:
Applications: equipment.
250 psig (17.2 barg)/406°F (208°C)
• Overpressure relief and protection of Code:
Applications:
pumps, tanks,lines and hydraulic systems. A
• Air and non-hazardous gas service. 'UV'
S
M
E
• Pressure regulation. UV
• Air/Gas Compressors - portable or
• Continuous bypass relief.
stationary.
Code:
• Pressure Vessels - including tanks,
receivers, intercoolers, aftercoolers. 'UL' applies only to Model 200.

• Steam turbines, kettles, other steam-

processing equipment.
Code:
A
S
'UV' M
E
UV

3
 Safety and Relief
Valves

Sentinel Relief Valves For Steam Iron, Steel, Stainless Steel Relief Valves Iron Relief Valves For Liquid Service
Service For Liquid Service Model:
Model: Model: Model 91
Models 40R and 40RL Models 71S and 171 Features:
Features: Features: Extra heavy, rugged construction with
All parts are stainless steel. Precision lapped Extra heavy, rugged construction. Seats bolted bonnet to permit easy inspection
beveled seats for optimum performance. lapped for optimum performance. Spherical and servicing without removal from system.
Pivot between spring and disc corrects pivot between disc and spring corrects Quality cast iron body and bonnet with
misalignment and compensates for spring misalignment and compensates for spring bronze trim (insert and disc). Available
side thrust. side thrust. with optional stainless steel insert and disc.
Sizes: Sizes: Spring is steel with aluminum painting for
½” and ¾” (15 and 18 mm) ½” to 2” (15 to 50 mm) corrosion protection. High lift, wing guided
Press/Temp Limits: Press/Temp Limits: disc offers high relieving capacity. Insert
400 psig (27.6 barg)/850°F (455°C) 400 psig (27.6 barg)/550°F (288°C) and disc lapped for optimum performance.
Pivot between disc and spring corrects
Applications: Applications:
misalignment and compensates for side
• Sentinel (warning) on steam equipment. • Overpressure relief and protection
thrust.
Intended as audible warning device, not of pumps, tanks, lines and hydraulic
Sizes:
for pressure relief. systems. Acid, caustic, ammonia and
1½” to 6” (40 to 150 mm)
• Steam turbines. other corrosive liquids requiring iron, steel
or stainless steel materials. Press/Temp Limits:
400 psig (27.6 barg)/406°F (208°C)
• Pressure regulation.
Applications:
• Bypass relief.
• Overpressure relief and protection
• All 316 stainless steel Models 171S
of pumps, tanks, lines and hydraulic
suitable for sanitary/edible corrosive
systems.
applications.
• Pressure regulation.
• Suitable for installations where back
pressures to 60 psig (4.14 barg) are
present.

4
Iron Relief Valves For Liquid Service Stainless Steel Relief Valves For Liquid Safety Valves For Air Gas, Cryogenic
Model: Service Service
Models 218 and 228 Model: Model:
Features: Model 140 Models 189, 363 and 389
Extra heavy, rugged construction with Features: Features:
bolted bonnet to permit easy inspection Compact design requires minimum Unique three-piece disc assembly (with
and servicing without removal from system. installation space. Angle lapped seat Teflon® seat/seal) offers superior “leak-free”
Quality cast iron body and bonnet with provides tight shut-off. performance over the entire pressure/
bronze trim (insert and disc). Available Sizes: temperature operating range. Control ring
with optional stainless steel insert and disc. 3/ ” and ½” (10 and 15 mm)
8 offers precise adjustment of blowdown.
Spring is steel with aluminum painting for Heavy duty construction provides long
Press/Temp Limits:
corrosion protection. High lift, wing guided service life. Pivot between disc and
300 psig (20.7 barg)/406°F (208°C)
disc offers high relieving capacity. Insert spring corrects for all misalignment and
Applications:
and disc lapped for optimum performance. compensates for spring side thrust.
Pivot between disc and spring corrects • A general utility valve of all stainless steel
Sizes:
misalignment and compensates for side construction, including spring, for liquid
½” and ¾” (15 and 18 mm)
thrust. Standard with handwheel for easy installations.
Press/Temp Limits:
adjustment.
2500 psig (172.4 barg)/350°F (177°C)
Sizes:
3”, 4” and 6” (80, 100 and 150 mm) Applications:
• Cryogenic “cold” and liquefied gas,
Press/Temp Limits:
Adjustable 60/200 psig oxygen and gas service.
(4.14/13.8 barg)/406°F (208°C) • Multi-stage air and gas compressors,
Applications: intercoolers and aftercoolers and
• Fire Pump Service, UL and FM approved. receivers.
Code: • Thermal expansion relief and/or full rated
capacity discharge.
• Air, gas and liquefied gas lines and
systems.
Code:
A
'UV' S
M
E
UV

5
 Safety and Relief
Valves

Iron Vacuum Valves Iron Safety Valves For Air and Non- Blower Relief Valves
Model: Hazardous Gas Service Model:
Model 215V Model: Model 338
Features: Model 337 Features:
High capacity full nozzle design. Bronze Features: A non-code modulating Relief Valve for air
nozzle, disc and guide with cast iron High capacity full nozzle design. Bronze service.
housing. Flat bronze valve seats are lapped nozzle, disc and guide with cast iron Sizes:
for optimum performance. Warn ring housing. Flat bronze valve seats are lapped 2” (50 mm)
offers easy adjustability for precise opening for optimum performance. Warn ring offers
Press/Temp Limits:
and minimum pre-open or simmer and easy adjustability for precise opening and
5 to 30 psig (0.69 to 2.06 barg)
exact blowdown control. Pivot between minimum pre-open or simmer and exact
-30°F to 400°F (-34°C to 204°C)
disc and spring corrects misalignment blow-down control. Pivot between disc
Applications:
and compensates for spring side thrust. and spring corrects misalignment and
compensates for spring side thrust. “Lift- • Protection of low to medium pressure,
Optional SS trim available.
pin” lift device for easy manual testing. high volume blowers.
Sizes:
2”, 2½” and 3” (50, 65 and 80 mm) Optional SS trim available. • Bulk hauling trailers/equipment.

Vacuum Limits: Sizes:

2”, 2½” and 3” (50, 65 and 80 mm)
29” Hg 982 mbarg 406°F (208°C)
Press/Temp Limits:
Applications: 60 psig (4.14 barg)/406°F (208°C)
• Bulk hauling trailers/equipment.
Applications:
• Light gauge tanks. • Protection of low-to-medium pressure,
• Protection of high volume vacuum pumps high volume blowers, compressors and
and conveying systems. pneumatic conveying systems.
Code: • Bulk hauling trailers/equipment.
• Light gauge trucks.
Code:
A
'UV' S
M
E
UV

6
Relief Valves For Air/Gas Service Steel, Stainless Steel Safety/Relief Steel Safety Valves For Steam, Air,
Model: Valves For Liquid, Air, Gas, Steam Non-Hazardous Gas Service
Models 230, 330, 330S and 333S Service Model:
Features: Model: Models 300 and 600
Lightweight aluminum construction, Models 264, 265, 266, and 267 Features:
resistant to environmental and internal Features: Heavy duty construction of high quality
corrosion. Opening pressure is repetitively Extra heavy rugged construction. Top steel with stainless steel full-nozzle trim.
consistent, relief action is smooth, reseating guided design offers high capacity with Bolted bonnet design for easy maintenance.
is positive with minimum pressure drop. 0.110 in2 (0.2794 cm2) orifice area. Seats Steel yoke incorporates a cover-shield for
The full spring load is never imparted lapped to optical flatness. Ball bearing guiding surfaces and provides for fully
to synthetic disc insert. Seat tightness pivot between disc and spring corrects exposed spring. Seats lapped to optical
increases to a maximum as inlet pressure misalignment and compensates for spring flatness. Dual control rings offer easy
approaches the opening pressure. Urethane side thrust. O-ring soft seat available. adjustability for precision opening with
soft seat available for improved seating Sizes: minimum pre-open or simmer and exact
performance. ½”, ¾” and 1” (15, 18, and 25 mm) blowdown control. Heavy duty lift lever
Sizes: Press/Temp Limits: assembly.
¼” to ½” (7 to 15 mm) 3300 psig (227.6 barg)/750°F (400°C) Sizes:
Press/Temp Limits: Applications: 1¼” to 6” (32 through 150 mm)
330: 1000 psig (69 barg) minimum, • Protection of pumps, compressors, Press/Temp Limits:
7500 psig (517.1 barg) pressure vessels or systems handling 1000 psig (69 barg)/800°F ( 427°C)
maximum/185°F (85°C) corrosive liquids or vapors at high Applications:
230: 300 psig (20.7 barg) minimum, pressure and/or temperature. • Steam boilers and generators.
1500 psig (103.4 barg) • Sentinel (warning) on steam equipment. • Pressure reducing stations.
maximum/185°F (85°C) Code:
• Air/gas compressors – reciprocating or
Applications: A
S
rotary.
'UV' M
E
• Multi-stage high pressure compressors, UV
• Pressure Vessels – including tanks,
intercoolers and after-coolers.
receivers, intercoolers, oil-gas separators,
• High pressure receivers and storage lines.
bottles.
• Gags available.
• Thermal expansion relief. Code:
• Breathing air pac recharge compressors. A
S
'V' M
E
• Scuba recharge compressors. V

A
Code: 'UV'
S
M
E
UV
A
S
'UV' M
E
UV

7
 Safety and Relief
Valves

Drip Pan Elbow Safety Valves For Hot Water Heating Brass Safety Valves for Air,
Model: Boilers Non-hazardous Gas
Model 299 Model: Model:
Features: Model 537 Models 541, 542 and 548
Illustration shows a discharge elbow and Features: Features:
drip pan unit attached to a safety valve with Extra heavy construction provides long Top guided disc – High capacity – Manual
female NPT outlet. For safety valves with life. Top guided disc assembly incorporates lift/SS ring – Canadian registered.
flanged outlets – 2” to 4” – use companion resilient seal in seating area. Working parts 541 – Brass/SS construction/BUNA-N seat
flange, short nipple and drip pan elbow, all are protected from corrosion by discharged 542 – Brass/SS construction/Viton® seat
same size as valve outlet. 6” and 8” elbows liquid by an isolating diaphragm. Pivot 548 – Brass construction/SS seat
have integral 125# ANSI B16.1 Flange. between disc assembly and stem corrects (metal seats)
Important - Length of discharge piping for misalignment and compensates for
Sizes:
must be kept to a minimum. For design spring side thrust. Heavy duty lift lever.
¼” and ½” (7 and 15 mm)
considerations see articles: “Steam Flow Sizes:
Press/Temp Limits:
Through Safety Valve Vent Pipes” by H.E. ¾” to 2” (18 to 50 mm)
400 psig (27.6 barg)/400°F (204°C)
Brandmaier and M.E. Knebel (Dec. 1975) Press/Temp Limits:
160 psig (11 barg)/250°F (121°C) Applications:
and “Analysis of Power Plant Safety and
• Small-to-medium size, single and multi-
Relief Valve Vent Stacks” by G.S. Liao (Nov. Applications:
• Hot water boiler and generators. stage, air compressors, intercoolers,
1974) available through ASME Publications.
• ASME Code Section IV. aftercoolers, instrument/control air lines
Applications:
Code: and systems.
Recommended installation on outlet/
A
S • Air tanks/receivers and pressurized
discharge pipe for safety valves. Used on 'HV' M
E
equipment.
steam service.
HV

Code:
A
S
'UV' M
E
UV

8
Bronze, Steel and Stainless Steel Safety 916: 1400 psig (96.5 barg)/608°F (320°C) Iron Safety Valves For Steam Heating
Relief Valves For Air, Gas, Steam, steel/resilient seat/seals Boilers
Liquid and Vacuum Service 917: 1400 psig (96.5 barg)/608°F (320°C) Model:
Model: steel/resilient seat/seals Model 930
Models 910, 911, 912, 913, 916, 917, 920, Features:
920: 1400 psig (96.5 barg)/800°F (427°C)
921, 927, 928, and 929 Extra high capacity for industrial,
steel/stainless steel trim
Features: commercial and residential low pressure,
921: 1400 psig (96.5 barg)/800°F (427°C)
Valve housing is heavy duty cast steel, steam heating boilers. Cast iron with
steel/stainless steel trim
stainless steel or bronze. Standard spring bronze nozzle, disc and guide. Large seat
material is stainless steel suitable for 927: 1400 psig (96.5 barg)/800°F (427°C)
area/guide area ratio, along with disc pivot
temperatures to 550°F (288°C). High steel/stainless steel trim
design insures top valve performance. Flat
temperature alloy spring good to 800°F 928: 1400 psig (96.5 barg)/800°F (427°C) bronze valve seats are lapped for optimum
(427°C). Hex on valve nozzle provides for steel/stainless steel trim performance. Reversible lift lever for “pull-
easy installation. Single control ring offers 929: 1400 psig (96.5 barg)/800°F (427°C) up” or “pull-down” manual testing.
easy adjustability of blowdown. Pivoting disc steel/stainless steel trim Sizes:
design offers exceptional seat alignment. Applications: 2”, 2½” and 3” (50, 65 and 80 mm)
Seats lapped to optical flatness. Guide-
• Air/gas compressors. Press/Temp Limits:
to-nozzle ratio reduces friction. Models
• Liquid Filled Pressure Vessels/Systems – 15 psig (1.03 barg)/250°F (122°C)
920, 921 and 927 are certified for ASME
ASME Sec. VIII (UV). Applications:
Section I - Special Requirements. Models
916, 917, 918 and 919 O-ring soft seated • High Temperature/Pressure Hot Water • Low pressure steam heating boilers ASME
valves are temperature limited by soft seat Boilers – ASME Sec. I (V). Code Section IV
material. Available for FM Firepump service. • Pressure Vessels – containing gas, Code:

Model 928 certified for ASME Section I - air or steam. A

S
'HV' M
E
Liquid • Process and industrial applications HV

Model 929 is certified for ASME Section I - requiring steel/stainless steel

PTFH (Liquid Phase Thermal Fluid) construction.
Sizes: • Optional resilient soft seats available
½” to 2” (15 to 50 mm) for superior leak free performance.
Press/Temp Limits: • Vacuum service.
910: 1400 psig (96.5 barg)/800°F (427°C) • Organic Fluid Vaporizers - ASME Sec. I (V).
steel/stainless steel trim
• Forced Flow Steam Generators -
911: 1400 psig (96.5 barg)/800°F (427°C) ASME Sec. I (V).
all stainless steel Code:
912: 300 psig (17.2 barg)/406°F (208°C)
A
S
bronze/brass trim 'UV' M
E
UV

913: 1400 psig (96.5 barg)/425°F (219°C) A

bronze/SST trim 'V' S

M
E
V

9
 Safety and Relief
Valves

Bronze Safety Valves For Air Steam, Press/Temp Limits: Iron Safety Valves For Air Steam,
Non-Hazardous Gas 300 psig (20.7 barg)/425°F (219°C) Non-Hazardous Gas Service
Model: Applications: Model:
Series 6000 • Steam boilers and generators. Models 6252 and 6254
Features: • Air/gas compressors – reciprocating Features:
A heavy duty casting. Wide hex on or rotary – portable or stationary, Heavy duty construction of high quality cast
valve body provides clearance for easy intercoolers and aftercoolers. iron with stainless steel semi-nozzle trim.
installation. Seats lapped to optical flatness. Bolted bonnet design for easy maintenance.
• Pressure Vessels – containing steam, air
Dual control rings offer easy adjustability for Seats lapped to optical flatness. Dual control
or non-hazardous gas. Including tanks,
precise opening with minimum pre-open rings offer easy adjustability for precision
receivers, sterilizers and autoclaves.
or simmer and exact blowdown control. opening with minimum pre-open or simmer
Ball bearing pivot between disc and spring • Pressure Reducing Valves – protection and exact blowdown control. Heavy duty lift
corrects misalignment and compensates of the discharge or low pressure side of lever assembly.
for spring side thrust. Grooved piston type system.
Sizes:
disc reduces sliding area and friction. Heavy • Models 6933, 6934 and 6935 are certified 1½” to 6” (40 to 150 mm)
duty lift lever assembly. Models 6010, 6030, for ASME Section IV, 15 psig only.
Press/Temp Limits:
6182 and 6130 provided with optional • O-ring disk available with EPR or Viton®. 250 psig (17.2 barg)/406°F (208°C)
resilient O-ring seat for superior leak- free Code: Applications:
performance. Models 6021, 6121, 6221, A
S
'HV' M • Steam boilers and generators.
and 6934 offer Teflon® (PFA) disc insert for E
HV

exceptional leak-free performance (use on A

• Pressure reducing stations.
'V' S
M
E
steam only). Models 6030, 6130, 6230, and V
• Air/gas compressors – reciprocating or
6935 supplied with stainless steel disc and A
S rotary.
'UV' M
E
nozzle for use on severe applications and/or UV
• Pressure Vessels – including tanks,
set pressure up to 300 psig (20.7 barg). receivers, intercoolers, oil-gas separators,
Sizes: lines.
½” to 2½” (15 to 65 mm) • Blower applications.
• Model 6254 is certified for ASME Section
IV, 15 psig only.
Code:
A
'HV' S
M
E
HV

A
'V' S
M
E
V

A
'UV' S
M
E
UV

10
Model Index

Hot Water

Hot Water
Vacuum

Vacuum
Air/Gas

Air/Gas
Flange

Flange
Steam

Steam
Liquid

Liquid
Inlet Sizes Inlet Sizes
NPT

NPT
Model in (mm) Model in (mm)
1, 2 ½, ¾ - 1 (15, 18 - 25) ⃞ ⃞ ⃞ 910 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞ ⃞
19 ½-3 (15 - 80) ⃞ ⃞ ⃞ 911 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞ ⃞
20 ½-3 (15 - 80) ⃞ ⃞ ⃞ 912 ½-2 (15 – 50) ⃞ ⃞ ⃞ ⃞ ⃞
200A, 200H ½-2 (15 - 50) ⃞ ⃞ ⃞ 913 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞ ⃞
30 ¼ (7) ⃞ ⃞ 916 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞ ⃞
40R, 40RL ½-¾ (15 - 18) ⃞ ⃞ 917 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞ ⃞
71S ½-2 (15 - 50) ⃞ ⃞ 918 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞
171 ½-2 (15 - 50) ⃞ ⃞ 919 ½-2 (15 - 50) ⃞ ⃞ ⃞ ⃞ ⃞ ⃞
171S ½-2 (15 - 50) ⃞ ⃞ 920, 921 ½-2 (15 - 50) ⃞ ⃞ ⃞
91 1¼ - 6 (32 - 150) ⃞ ⃞ ⃞ 927 ½-2 (15 - 50) ⃞ ⃞ ⃞
218 3-6 (80 - 150) ⃞ ⃞ ⃞ 928 ½-2 (15 - 50) ⃞ ⃞ ⃞
228 3-6 (80 - 150) ⃞ ⃞ ⃞ 929 ½-2 (15 - 50) ⃞ ⃞ ⃞
140 3/8 -½ (10 - 15) ⃞ ⃞ 930 2, 2½, 3 (50, 65, 80) ⃞ ⃞
189 ½-¾ (15 - 18) ⃞ ⃞ 6010 ½ - 2½ (15 - 50) ⃞ ⃞ ⃞
363 ½-¾ (15 - 18) ⃞ ⃞ 6021 ½ - 2½ (15 - 50) ⃞ ⃞ ⃞
389 ½-¾ (15 - 18) ⃞ ⃞ 6030 ½-2 (15 - 50) ⃞ ⃞ ⃞
215V 2, 2½, 3 (50, 65, 80) ⃞ ⃞ ⃞ 6182 ½-2 (15 - 50) ⃞ ⃞ ⃞
337 2, 2½, 3 (50, 65, 80) ⃞ ⃞ 6130 ½-2 (15 - 50) ⃞ ⃞ ⃞
338 2 (50) ⃞ ⃞ 6186 ½-2 (15 - 50) ⃞ ⃞ ⃞
230, 330 ¼- ½ (7-15) ⃞ ⃞ 6283 ¾-2 (18 - 50) ⃞ ⃞ ⃞
333 ¼- ½ (7-15) ⃞ ⃞ 6221 ¾-2 (18 - 50) ⃞ ⃞ ⃞
264, 265 ½, ¾ - 1 (15, 18 - 25) ⃞ ⃞ ⃞ ⃞ 6230 ¾-2 (18 - 50) ⃞ ⃞ ⃞
266, 267 ½, ¾ - 1 (15, 18 - 25) ⃞ ⃞ ⃞ ⃞ 6933 ½-2 (15 - 50) ⃞ ⃞
300, 600 1¼ - 6 (32 - 150) ⃞ ⃞ ⃞ 6934 ½-2 (15 - 50) ⃞ ⃞
537 ¾-2 (18 - 50) ⃞ ⃞ 6935 ½-2 (15 - 50) ⃞ ⃞
541, 542 ¼-½ (7 - 15) ⃞ ⃞ 6252 1½ - 6 (40 - 150) ⃞ ⃞ ⃞ ⃞
548 ¼-½ (7 - 15) ⃞ ⃞ 6254 1½ - 4 (40 - 100) ⃞ ⃞ ⃞

NOTES
* Pressure and temperature limits may vary depending upon valve size, material, etc.
Please consult appropriate product catalog for specific data.
1. As improvements in design are continually being made, specifications are not to be
regarded as binding in detail and dimensions/materials are subject to change without
notice. Kunkle does not accept liability for damages which result from errors, omissions,
misuse or misapplication of any information contained in this brochure.

11
Emerson Electric Co. Final Control McKinney Emerson Automation Solutions Latin America
Global Headquarters North America 3200 Emerson Way World Area Headquarters 1300 Concord Terrace Suite 400
8000 West Florissant Avenue McKinney, Texas, 75070 Sunrise, Florida 33323,
St. Louis, Missouri, 63136 Marshalltown United States Asia Pacific United States
United States 301 South 1st Avenue T +1 800 558 5853 1 Pandan Crescent T +1 954 846 5030
T +1 314 679 8984 Marshalltown, Iowa, 50158 Singapore 128461
[email protected] United States Houston T +65 6777 8211 Middle East & Africa
Emerson.com/FinalControl T +1 641 754 3011 19200 Northwest Freeway Emerson FZE P.O. Box 17033,
Houston, Texas, 77065 Europe Jebel Ali Free Zone - South 2,
United States Neuhofstrasse 19a P.O. Box Dubai, United Arab Emirates
Emerson.com T +1 281 477 4100 1046 CH 6340 Baar, T +971 4 8118100
Switzerland
Facebook.com/EmersonAutomationSolutions Stafford T +41 41 768 6111
LinkedIn.com/company/Emerson-Automation-Solutions 3950 Greenbriar Drive
Stafford, Texas, 77477
Twitter.com/EMR-Automation United States
T +1 281 274 4400

©2017 Emerson Automation Solutions. All rights reserved.

Kunkle is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. The Emerson logo is a
trade mark and service mark of Emerson Electric Co. All other marks are property of their respective owners.

The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All
sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifica-
tions of our products at any time without notice. Responsibility for proper selection, use and maintenance of any product or service remains solely
with the purchaser and end user.
VCPBR-07952-EN 18/12