Career Profile
Budi Arpianto
Career spans more than 20 years of professional experience as Designer
(Piping/Mechanical).
Email : [email protected]
Mobile Phone : +62 813 1470 0610
Date of Birth : January 28, 1974
Current Position : Jakarta, Indonesia
Postal Address : Taman Mutiara H31, Tangerang City, Banten Province 15153
Country : Indonesia
Qualifications:
- Diploma from Polytechnic Shipbuilding - Institute Technology Sepuluh Nopember (ITS)
- Bachelor Degree in Naval Architect - Institute Technology Adhi Tama Surabaya
Market Sectors:
Offshore Platform Oil & Gas, FPSO, LNG, Power Plant, Petrochemical, Shipbuilding.
Overseas Experience:
Turkmenistan (Kyanli - Turkmenbasy)
Malaysia (Johor Bahru)
Singapore
Relevant Course/Training:
- PDMS and MDS (Certificate)
- Autocad 2D
- Naviswork
- Autocad Plant 3D
- Smartpalnt 3D - SP3D (incuding Isometric Plot, draft and Check To Do List) (Certificate)
Languages:
English, Malay, and Bahasa Indonesia
CAREER HIGHLIGHTS
Senior Designer (Piping/Mechanical)
PT. Truba Jaya Engineering
October 2018 – Current
Jakarta, Indonesia
Project : PLN (State Electricity Company under Indonesian Government)
subsidiary to build 70 Megawatt Gas Engine power plant at 7 location eastern region of
Indonesia.
Software : Autocad 2D
- Routing pipe base on PID, Plot Plant and etc.
- Provide pipe support base on pipe support standard.
- Provide piping arrangement and Isometric.
- Prepare location of lay down area.
- Work and share with other discipline.
Senior Designer (Piping/Mechanical)
KBR (Kellogg Brown and Root)
May 2018 – September 2018 (5 months)
Jakarta, Indonesia
Project :
Abadi LNG Project (Pre- FEED), INPEX Masela.
Software: Autocad 2D
- Site Master Plant and Plot Plant.
- Equipment layout based on PFD and UFD also follows requirements from Safety
Department.
- Prepare location of lay down area.
- Work and share with other discipline.
Senior Designer (Piping/Mechanical)
PT. Asia Pacific Rayon (Pulp and Paper Industry) managed by Royal Golden Eagle
January 2018 – March 2018 (3 months)
Pekanbaru, Indonesia
Software : Autocad Plant 3D
- Design piping layout and layout of equipment.
- Piping routing from equipment to equipment based on PID.
- Review and isometric check.
- Define support location with standard or special support.
- Design and review of location of valve easy to operated and maintenance.
- Review location of lay down area.
Scope of work: to layout pipe in chemical area CS2 and WSA.
Senior Designer (Piping/Mechanical)
KBR (Kellogg Brown and Root)
March 2011 – April 2017 (6 years and 2 months)
Jakarta, Indonesia
Project:
* MAERSK OIL Culzean Field Development, Offshore Platform (detail engineering)
Software: PDMS/MDS
- Create equipment base on data sheet.
- Design and review for nozzle orientation and platform equipment.
- Equipment layout base on plot plant.
- Piping routing from equipment to equipment by looking P&ID.
- Update isometric.
- Define support location with standard or special support.
- Prepare mechanical handling, maintenance access, operation access on model.
*Pacific Northwest LNG Plant (FEED), PETRONAS Carigali, Sdn. Bhd.
Software: SP3D
- Create equipment base on data sheet/ vendor data.
- Design and review for nozzle orientation and platform equipment.
- Piping routing from equipment to equipment by looking P&ID.
- To do list updated.
- Define support location with standard or special support.
- Update isometric.
- Prepare mechanical handling, maintenance access, operation access on model.
*Mansuriya NGL Plant (FEED) IRAQ, Turkish Petroleum.
Software: SP3D
- Create equipment base on data sheet/ vendor data.
- Design and review for nozzle orientation and platform equipment.
- Piping routing from equipment to equipment by looking P&ID.
- To do list updated.
- Update isometric.
- Prepare mechanical handling, maintenance access, operation access on model.
* Shah Deniz Stage 2 Project - Offshore (FEED)
Caspian Sea - Azerbaijan Sector.
KBR providing engineering design and procurement support services for an offshore
complex consisting of two bridge-linked fixed jacket platforms as well as an onshore facility.
Software: PDMS/MDS
- Create equipment base on data sheet.
- Design and review for nozzle orientation and platform equipment.
- Equipment layout base on plot plant.
- Piping routing from equipment to equipment by looking P&ID.
- Update isometric.
- Define support location with standard or special support.
- Prepare mechanical handling, maintenance access, operation access on model.
* Quad 204 - FPSO (Detail Engineering)
Software: PDMS / MDS
- Create Equipment base on data sheet.
- Design and review for nozzle orientation and platform equipment.
- Equipment layout base on plot plant.
- Piping routing from equipment to equipment by looking P&ID.
- Update isometric.
- Define support location with standard or special support.
- Clash check.
- Prepare mechanical handling, maintenance access, operation access on model.
* Browser – LNG Project.
Job Description:
- MTO.
Senior Designer (Piping/Mechanical)
Malaysia Marine and Heavy Engineering Sdn Bhd (MMHE) Malaysia
November 2009 – December 2010 (1 year and 2 months)
Turkmenistan
Software: PDMS/MDS
- Create Equipment base on data sheet.
- Design and review for nozzle orientation and platform equipment.
- Equipment layout base on plot plant.
- Piping routing from equipment to equipment by looking P&ID.
- Update isometric.
- Define support location with standard or special support.
- Clash check.
- Prepare mechanical handling, maintenance access, operation access on model.
Project:
* MCR-A topside, Caspian Sea
* Gravity based structure (GBS) Caspian Sea
Senior Piping Designer/ Checker
Sime Darby Engineering Sdn Bhd
May 2008 – November 2009 (1 year and 7 months)
Johor Bahru, Malaysia
Software: PDMS/MDS
- Update isometric.
- Review and check isometric ( line number, size, tag valve, instrument, flow, slope (if
needed), check continued pipe.
- Check pipe support location in isometric use standard or special support.
- Check equipment and check nozzle (tag number, size, rating, name to pipe
- Clash check.
Project:
* Kumang Central Processing Platform.
* Tangga Barat Cluster Gas and Condensate Field.
FIELD ENGINEER
PT. Pelita Mustika Mandiri
July 2007 – March 2008 (9 months)
Jakarta, Indonesia
- Rental and provide installation of offshore/ onshore facilities of mud cooler.
* Client: Conoco Philips, Chevron.
3D Designer (Mechanical and Piping)
PT. Alstom Power System Indonesia
December 2004 – May 2007 (2 years and 6 months)
Surabaya, Indonesia
Software: PDMS/MDS
Responsible for developing the design graphic schedule based on scope of work under
Design graphic group Manager supervision.
Manages execution of the drafting in accordance with the customer specification,
schedule requirements, applicable codes and company’s standard.
Recommend changes in design to simplify or improve basic designs in relates with
Design graphics area.
Check the drawings for accuracy, completeness, and practicality of manufacture,
installation, and maintenance.
Responsible for reducing the repetition errors.
Assist manufacturing with the technical details of drafting work.
Designing pipe routings based on P&ID drawings in 3D model which will be used to
generate arrangement drawings, fabrication drawings, and material list.
Pipe routings between equipments & inside structure using PDMS 11.6
Spool drawings for fabrication/Isometric drawing.
Material Take off (MTO).
Project: Castejon, Langage Energy Centre, Grain, and Aghada.
ENGINEER
PT. Plimsoll Indonesia
August 2003 – September 2004 (1 year and 2 months)
Surabaya, Indonesia
Rental and provide Installation of Offshore and Shipping Facilities Winches, Bollard etc.
DRAFTER
PT. Pan United Shipyard Indonesia
February 2002 – July 2003 (1 year and 6 months)
Batam, Indonesia
- Piping layout, piping section, isometric, MTO report
- Scope of work in repair and new shipbuilding
DRAFTER
PT. Dumas Tanjung Perak Shipyard
April 1998 – December 2001 (3 years and 9 months)
Surabaya, Indonesia
- Piping layout, piping section, isometric, MTO report
- Scope of work in repair and new shipbuilding
