HIGH ENERGY IGNITION MODULE
200-HEP-A6Z 7J
200-HEP-A6Z 7J
COMBUSTION AND ENERGY - [email protected] - www.ce2k.com - Ph. +39.0341.260926 rev_04
HIGH ENERGY IGNITION MODULE
200-HEP-A6Z 7J
KEY FEATURES MECHANICAL FEATURES
• High energy ignition system • Electronic circuits
• Power discharge: 7J • Operating temp. range: - 40°C to + 85°C
• Output volt.: 2kV impulsive capacity • Storage temp. range: - 55°C to + 55°C
discharge • Dimensions: 89x74x118mm
• Degree of protection: IP20 • Unit weight: 500g
• Discharge frequency: < 0,6s to >8s • Enclosure: PVC
adjustable, preset to 5s • Connections: screw terminals
• Installation type: for DIN connector
• Booster function: 4x7J/s (as option) PART NUMBER
OPTIONS • 200-HEP-A6Z 7J
• 200-HEP-A6Z 7J + 48VDC CONVERTER
• High Energy Ignition Probe 200-HEF-5AA • 200-HEP-A6Z 7J + MDR (power supply
• Spark tip: 200-HEF-9A3 from 100 to 240VAC)
• Ex d IIC fix or portable version
APPLY TO
200-HEP-A6Z 7J
• Power supply from 100 to 240VAC with
dedicate power converter
• Flares
• Boilers
INSTALLATION
• Inside control local panel INTERNATIONAL REGULATION
• CE marking
ELECTRICAL FEATURES • UL for MDR power supply
• EAC for Russian market
• Nominal operating voltage: 2000V
• Consumption: < 1,6A MANUFACTURER
• Power supply 12/24VDC (from 10,5 to 28
VDC) Combustion and Energy Srl
• Electronics c/w temperature
compensation
• Discharge frequence regulation
• Fault relay (as option) - Max. applicable
voltage 60VDC/42VAC 0,2A
• 12-24VDC remote start (as option)
COMBUSTION AND ENERGY - [email protected] - www.ce2k.com - Ph. +39.0341.260926
rev_04
Document is subject to change without any notice
HIGH ENERGY IGNITION MODULE
200-HEP-A6Z 7J
89
+12/24VDC
12/24VDC
OVDC
DIP SETTING
7 7
7 7 74
200-HEP-A6Z 7J
SPARE HE OUTPUT #2
EARTH CONECTION
HE OUTPUT #1
4 3 2 1
ON HE MODULE, NO ADDITIONAL FUNCTION
4 3 2 1
ON
HE MODULE WILL WORK UNTIL 12 OR 24VDC IS APPLYED ON THE START RELAY
(Connect 12/24VDC to PIN 3 and 0V to PIN 4)
4 3 2 1 TIP AND CABLE FUNCTION CHECKING AVAILABLE
ON FAIL SAFE NORMAL CONDITION CONTACT CLOSED, FAULT CONDITION CONTACT OPEN
(See max. applicable voltage)
4 3 2 1
ON
FAULT CONTACT RELAY N.C.
(See max. applicable voltage)
4 3 2 1
ON HE MODULE FUNCTION BOOSTER ACTIVATED (4X7J/s)
4 3 2 1
ON HE MODULE FUNCTION BOOSTER WITH EXTERNAL START RELAY
rev_03 COMBUSTION AND ENERGY - [email protected] - www.ce2k.com - Ph. +39.0341.260926 rev_04
HIGH ENERGY IGNITION MODULE
200-HEP-A6Z 7J
• Led Red ON: when the HE module is sparking.
• Led Green ON: when the HE module is ON and waiting for spark.
• Led Red flashing continuously: cable interrupted or TIP not connected (reignition delay 30
seconds) - (This function is valid only if DIP 2 is ON)
• Led Red flashing continuously: cable interrupted or TIP in short circuit ( reignition delay 10
seconds) - (This function is valid only if DIP 2 is ON)
• Led Orange (green + red) flashing continuously: spark generator component or TIP are no more
efficently. (This function is valid only if DIP 2 is ON)
TOP VIEW SIDE VIEW
89 120
200-HEP-A6Z 7J
LATO C
74
rev_04 COMBUSTION AND ENERGY - [email protected] - www.ce2k.com - Ph. +39.0341.260926
