Scribd
Upload
1K views1 page

Plumbing & Septic System Plan

The document provides plumbing notes and specifications for pipe installation and prohibited fittings. It specifies that horizontal piping must have a grade of 2-3% and lists prohibited fittings like double hubs or tees. It also notes requirements for septic systems like allowing 300mm of air space under vault roofs and not constructing vaults under buildings. All plumbing work must follow national codes and standards and be supervised by a licensed plumber.

Uploaded by

michael jan de celis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Plumbing & Septic System Plan

The document provides plumbing notes and specifications for pipe installation and prohibited fittings. It specifies that horizontal piping must have a grade of 2-3% and lists prohibited fittings like double hubs or tees. It also notes requirements for septic systems like allowing 300mm of air space under vault roofs and not constructing vaults under buildings. All plumbing work must follow national codes and standards and be supervised by a licensed plumber.

Uploaded by

michael jan de celis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PLUMBING NOTES AND SPECIFICATIONS

0.40m GRADE OF HORIZONTAL PIPINGS:


Run all horizontal pipings perfect alignment and

75MM PVC
at uniform grade of not less than two percent
75MM THK CONC. COVER
(2.0%) nor more than three percent (3.0%).
100 mm dia. PVC sanitary tee inlet PROHIBITED FITTINGS:
0.40m 10mm diameter bars spaced at 0.15m O.C.B.W.
75MM PVC No double hub of double tee branch to be used
75MM PVC 0.10m
on horizontal soil or waste lines.

75MM PVC
inlet No septic vault shall be constructed under the
building.
PLAN Not less than 300mm of air space must be left
75MM THK CONC. COVER 1.50m MH MH MH
between the top of the sewage and under part
0.10m 75MM PVC of the vault roof slab.

outlet All plumbing works shall be done in accordance


with the provisions of the National Plumbing
0.40m 100MM CHB
0.10m Inspection Office and pertinent provisions of the
0.10m 0.10m 0.10m 0.10m
75MM THK. CONC. FLOORING National Building Code.
1.20m 1.00m 1.00m
SECTION 3.60m All plumbing works shall be under the direct
supervision of a duly licensed Master Plumber or
RAINWATER CB DETAILS 0.10m
a Sanitary Engineer.
SCALE 1:20m C.O. MH C.O. MH C.O. MH C.O.
LEGEND:
inlet air space SV SEPTIC VAULT
air space WC WATER CLOSET
air space
outlet
0.80m DS DOWNSPOUT
MH MANHOLE
2.00m FCO FLOOR CLEAN OUT
75MM THK CONC. COVER LEACHING CHAMBER 2
DIGESTIVE CHAMBER LEACHING CHAMBER 1
CO CLEAN OUT
100mm THK CHB WALL / PLAIN CEMENT FD FLOOR DRAIN
PLASTERED FINISH AT INTERNAL SIDE
0.80m KS KITCHEN SINK
75MM PVC
B.W.
75MM PVC
CB CATCH BASIN

0.15m FAU FAUCET


VSTR VENT STACK THRU ROOF
10mm dia. DSB space
PLAN at 0.15m on center
0.10m 0.10m 0.10m 0.10m LAV LAVATORY
0.80m 75MM THK CONC. COVER GV GATE VALVE
3.60m
0.10m 75MM PVC
WM WATER METER
WATER PIPE LINE
100MM CHB
WASTE PIPE LINE
1.00m

75MM THK. CONC. FLOORING


SEPTIC VAULT DETAILS
SCALE 1:40m
SECTION

WASTEWATER CB DETAILS
SCALE 1:30m
PREPARED BY: REG. No.: 5506 PROJECT TITLE: APPROVED BY: SHEET CONTENT: SHEET No.

8016845
GENERAL NOTES
PTR No.:
PROPOSED 2-STOREY RESIDENTIAL BUILDING SEPTIC VAULT DETAILS
ISSUED ON: 04-02-18 RAINWATER CATCH BASIN DETAILS
MICHAEL JAN M. DE CELIS JERRY F. LAGUDA WASTE WTR CATCH BASIN DETAILS
MASTER PLUMBER ISSUED AT: . G.S.C.

T.I.N. : 431-663-730

You might also like