Global LCD Panel Exchange Center www.panelook.

com

Product Information

Customer : G/A DATE : 16 Mar. 2010

SAMSUNG
SAMSUNG TFT-LCD
TFT-LCD

MODEL :: OWD733KI39
MODEL LTY400HF06
LTY400HF06
The information Described in this Specification is Preliminary and can be charged
without prior notice

NOTE :

Development Team 3, LCD Business

Samsung Electronics Co . , LTD.

tvkls OWD733KI39
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (6)
3. Electrical Characteristics ------------------------------------------------------------------------------ (9)
3.1 TFT LCD Module
3.2 Back Light Unit
4. Block Diagram ------------------------------------------------------------------------------------------- (11)
5. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)
5.1 Input Signal & Power
5.2 Inverter Input Pin Configuration
5.3 Inverter Input Power Sequence & Specification
5.4 LVDS Interface
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing ---------------------------------------------------------------------------------------- (19)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
7. Outline Dimension -------------------------------------------------------------------------------------- (22)
8. Packing -------------------------------------------------------------------------------------------------- (24)
9. Marking & Others --------------------------------------------------------------------------------------- (25)
10. General Precaution ---------------------------------------------------------------------------------- (26)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Y VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

* Revision History

Rev.
Date Page Summary
No

Mar.
16, 000 - First Issued
2010

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Z VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

General Description
Description
OWD733KI39
LTY400HF06 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit. The resolution of a 40.0“ is 1920 x
1080 and this model can display up to 1.07 Giga colors with wide viewing angle of 89¶ or
higher in all directions. This panel is intended to support applications to provide a excellent
performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display
terminals for AV application products, and High Definition TV (HDTV).
Features
ƒ RoHS compliance (Pb-free)
ƒ High contrast ratio, high aperture ratio, fast response time
ƒ SPVA (Super Patterned Vertical Align) mode
ƒ Wide viewing angle (·89¶)
ƒ Full HD(1920 x 1080 pixels) resolution (16:9)
ƒ Low Power consumption
ƒ 10 CCFTs (Cold Cathode Fluorescent Tube)
ƒ mini-LVDS (Low Voltage Differential Signaling) interface

General Information

Items Specification Unit Note

952(HTYP) x 551(VTYP) ·1.0mm
Module Size mm
61.2(DMAX)
Weight 9000(Max) g
Pixel Pitch 0.15375(H) * 3 x 0.42125(V) mm
Active Display Area 885.6(H) x 498.15(V) mm
Surface Treatment Haze 4.5%, Hard-coating (3H)

Display Colors 8bit + 2bit FRC -1.07G colors

Number of Pixels 1920 x 1080 pixel

Pixel Arrangement RGB vertical stripe

Display Mode Normally Black

Luminance of White 430 cd/m2 Typ.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ [ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD GND-0.5 13 V (1)

Storage temperature TSTG -20 65 ୅ (2)

Operating Temperature TOPR 0 50 ୅ (2)
Panel surface temperature TSUR 0 65 ୅ (3)
Shock ( non - operating ) SNOP - 50 G (4)
Vibration ( non - operating ) VNOP - 1.5 G (5)
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 93.8 % RH Max. (Ta ˺ 40 ¶C)
b. Maximum wet-bulb temperature at 40 ¶C or less. (Ta ˺ 40 ¶C)
c. No condensation
(3) Polarizer will not be damaged in this range, even though abnormal visual problems occur
in TSUR range.
(4) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

(40, 93.8)

(50, 50.4)

(65, 27.7)

Fig. Temperature and Relative humidity range

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ \ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.

Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
(Ta = 25 · 2¶C, VDD=12V, fv= 60Hz, fDCLK=148.5MHz, Dim = 100%)
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (3)
C/R *3000 5000 -
(Center of screen) SR-3
Rising Tr - 12 -
Response Falling Tf - 6 - (5)
msec
Time BM-7
G-to-G
Tg - 6.5 -
[AVE]
Luminance of White Normal (6)
YL 360 430 - cd/m2
(Center of screen) TL,R=0 SR-3
TU,D=0
Rx 0.643
Red
Ry Viewing 0.330
Angle
Gx 0.284
Green
Color Gy 0.609
TYP. TYP. (7),(8)
Chromaticity
Bx -0.03 0.148 +0.03 SR-3
(CIE 1931)
Blue
By 0.058
Wx 0.280
White
Wy 0.285
(7)
Color Gamut - - 72 - %
SR-3
Color Temperature - - 10000 - K (7)
Gamma Ƚ - 2.2 - SR-3

TL 79 89 -
Hor.
Viewing TR 79 89 - (8)
C/R˻10 Degree
Angle TU 79 89 - SR-3
Ver.
TD 79 89 -
Brightness Uniformity (4)
Buni - - 30 %
(9 Points) SR-3
* marked Items Value does not Specification above when “White stain” occurs at Center Point [Point ྜྷ of Note 2.]

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Single lamp current @ Vdim = 100%

Environment condition : Ta = 25 · 2 ¶C

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ ] VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

Photo detector
Photo detector Field

SR-3 1ദ
BM-7 2ദ Field

SR-3 : 50໅
BM-7 : 50໅

TFT - LCD Module

LCD Panel

The center of the screen

Note (2) Definition of test point

320 960 1600

Active Area
180 ྡ ྠ ྟ
Test Point
540 ྞ ྜྷ ྜ

900 ྛ ྚ ྙ

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel

G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ ^ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

Note (4) Definition of 9 points brightness uniformity

( B max  B min)
Buni 100
B max
Bmax : Maximum brightness
Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display data Black (data off) White (data on) White (data off)

TR TF
Optical Instruments
100%
Response
90%

10%
0%
TIME

Note (6) Definition of Luminance of White : Luminance of white at center point 㽶

Note (7) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point 㽶

Note (8) Definition of Viewing Angle

: Viewing angle range (C/R ı10)

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ _ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.
Ta = 25¶C · 2 ¶C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 11 12 13 V (1)
(a) Black - 900 1080
Current (b) White - 920 1100
of Power IDD mA (2),(3)
Supply (c) Mosaic - 950 1140
(4) Max Pattern - 1600 1920
Vsync Frequency fV - 60 - Hz
Hsync Frequency fH - 67.5 - kHz
Main Frequency fDCLK - 148.5 - MHz
Rush Current IRUSH - - 5 A (4)

Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=60Hz, fDCLK = 148.5MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) Mosaic d)Max. Pattern

(4) Measurement Conditions

VDD
100%
90%

10%
GND

TRUSH=1ms
Rush Current IRUSH can be measured when TRUSH. is 1ms

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ ` VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

3.2 Back Light Unit

The back light unit contains 10 CCFTs ( Cold Cathode Fluorescent Tube ).
The characteristics of lamps are shown in the following tables.
Ta=25 · 2¶C
Item Symbol Min. Typ. Max. Unit Note
Operating Life Time Hr 50,000 - - Hour (1)
Lamp Current Lc 13.0 14.0 15.0 mA -

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.
[Operating condition : Ta = 25·2୅, IL = 14.0 mArms(typ.), For single lamp only. ]

Socket

HOT 1

HOT 2

LCD
Inverter
Module

HOT 9

HOT 10

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ XW VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

4. Block Diagram

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ XX VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

5. Input Terminal Pin Assignment

5.1. Input Signal & Power
5.1.1 Pin Connector : JAE(FI-RE51S)
PIN
PIN No. Signal Description Signal Description
No.
1 Power VDD 26 RE[0]P Even LVDS Signal +
2 Power VDD 27 RE[1]N Even LVDS Signal -

3 Power VDD 28 RE[1]P Even LVDS Signal +

4 Power VDD 29 RE[2]N Even LVDS Signal -
5 Power VDD 30 RE[2]P Even LVDS Signal +
6 N.C. N.C. 31 GND GND
7 GND GND 32 RECLK- Even LVDS Clock-
8 GND GND 33 RECLK+ Even LVDS Clock+
9 GND GND 34 GND GND
10 RO[0]N Odd LVDS Signal - 35 RE[3]N Even LVDS Signal -
11 RO[0]P Odd LVDS Signal + 36 RE[3]P Even LVDS Signal +
12 RO[1]N Odd LVDS Signal - 37 RE[4]N Even LVDS Signal -
13 RO[1]P Odd LVDS Signal + 38 RE[4]P Even LVDS Signal +
14 RO[2]N Odd LVDS Signal - 39 GND GND
15 RO[2]P Odd LVDS Signal + 40 SCL I2C SCL
16 GND GND 41 SDA I2C SDA
Balance board
17 ROCLK- Odd LVDS CLK - 42 VSYNC
Sync Signal
18 ROCLK+ Odd LVDS CLK + 43 B_INT Bus Switching
19 GND GND 44 N.C. N.C.
20 RO[3]N Odd LVDS Signal - 45 N.C. N.C.
21 RO[3]P Odd LVDS Signal + 46 SA_MODE SA Mode Sel Signal
22 RO[4]N Odd LVDS Signal - 47 N.C. N.C.
23 RO[4]P Odd LVDS Signal + 48 N.C. N.C.
24 GND GND 49 N.C. N.C.
25 RE[0]N Even LVDS Signal - 50 TCON_RDY T-Con Ready
51 SEL1 SEC Internal Use Only

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ XY VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

̰ Option Pin Description

̰ B_INT : I2C BUS Switching Pull down 100˟/10k˟
L/OPEN SDA/SCL LINE BECOME HI-Z

H USER CAN ACCESS EEPROM

̰ SA_MODE : Direct 10˟

Operation Description
Low SET MODE
High SA_MODE

̰ TCON_RDY : Direct 100˟

Operation Description
Low Æ High Normal Operation
High Æ Low Error Operation

̰ SCL : Pull up 100˟/4.7k˟

̰ SDA : Pull up 100˟/4.7k˟
̰ VSYNC : Direct 100˟

̰ DCC Table

LUT No. Description

DCC1 for 120Hz
DCC2 for 120Hz @ Low temp.
DCC3, 4 Not use
DCC5 for 100Hz
DCC6 for 100Hz @ Low temp.
DCC7 Not use
DCC8 DCC off

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ XZ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

Note(1) Pin number starts from Right side

Pin No. 1
̷
PCB
Pin No. 4
̷
Pin No. 1 Pin No. 51

A. 51 Pin

#1 #51

connect name

#1 #51

B. 4 Pin

#1 #4

connect name

#1 #4

Fig. Connector diagram

a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X[ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

5.2. Inverter Input Pin Configuration

Connector : 20022WR-14AML

Pin No. Pin Configuration(FUNCTION)

1 Y[}
2 Y[}
3 Y[}
4 Y[}
5 Y[}
6 GND
7 GND
8 GND
9 GND
10 GND
11 Inverter Operation Status Output
12 Inverter On/Off Control Signal
13 No Connection
14 External Dimming Control Signal

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X\ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

5.3. Inverter Input Power Sequence & Specification

Specifications
Items Symbol Conditions Unit Note
Min. Typ. Max.
Input
Vin - 21.6 24.0 26.4 V Ta=25·Z¶j
Voltage
Input Vin=24V
ISAT 4.25 5.0 5.75 A -
Current EX_DIM=100%
Lamp Vin=24V
IO 13.0 14.0 15.0 mArms -
Current EX_DIM=100%
Operating Vin=24V
FO 50 52 54 kHz -
Frequency EX_DIM=100%

Backlight ON 2.4 - 5.25

ENA V -
On/Off OFF -0.3 - 0.8
Dmax 100% - - Note 1
Dimming
Vin=24V
Duty Dmin 15 20 25 % -
EX_DIM=100%
Output
Dmin 10.0 - - Note 2
Open Lamp Vin=24V
Vopen 1600 - - Vrms Note 3
Voltage EX_DIM=100%
Striking Vin=24V
Tst 1.0 1.5 2.0 sec -
Time EX_DIM=100%
EX_DIM
FEX_DIM Vin=24.0V 120 150 180 Hz -
Frequency
PWM High (On) 2.4 - 5.25
Signal Vpwm V -
Amplitude Low (Off) -0.3 - 0.4

୔ All data was approved after running 120minutes with LCM.

Note1. Duty Measurement [Duty(%) = Ton / T x 100]

Note 2. There art not shut-down and flicker at 10%@150Hz

There is not shut-down at 5%@75Hz
Note 3. Measurement Method : Check Vs on BLU Remaining all Lamps

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X] VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

5.4 LVDS Interface

LVDS pin Odd Data Even Data

TxIN/RxOUT0 R4 R4

TxIN/RxOUT1 R5 R5

TxIN/RxOUT2 R6 R6

TxOUT/RxIN0 TxIN/RxOUT3 R7 R7

TxIN/RxOUT4 R8 R8

TxIN/RxOUT6 R9 R9

TxIN/RxOUT7 G4 G4

TxIN/RxOUT8 G5 G5

TxIN/RxOUT9 G6 G6

TxIN/RxOUT12 G7 G7

TxOUT/RxIN1 TxIN/RxOUT13 G8 G8

TxIN/RxOUT14 G9 G9

TxIN/RxOUT15 B4 B4

TxIN/RxOUT18 B5 B5

TxIN/RxOUT19 B6 B6

TxIN/RxOUT20 B7 B7

TxIN/RxOUT21 B8 B8

TxOUT/RxIN2 TxIN/RxOUT22 B9 B9

TxIN/RxOUT24 HSYNC HSYNC

TxIN/RxOUT25 VSYNC VSYNC

TxIN/RxOUT26 DEN DEN

TxIN/RxOUT27 R2 R2

TxIN/RxOUT5 R3 R3

TxIN/RxOUT10 G2 G2

TxOUT/RxIN3 TxIN/RxOUT11 G3 G3

TxIN/RxOUT16 B2 B2

TxIN/RxOUT17 B3 B3

TxIN/RxOUT23 RESERVED RESERVED

TxIn/RxOUT28 R0 R0

TxIn/RxOUT29 R1 R1

TxIn/RxOUT30 G0 G0

TxIn/RxIn4 TxIn/RxOUT31 G1 G1

TxIn/RxOUT32 B0 B0

TxIn/RxOUT33 B1 B1

TxIn/RxOUT34 RESERVED RESERVED

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X^ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY
DISPLAY RED GREEN BLUE
COLOR SCALE
(10bit)
R R R R R R R R R R G G G G G G G G G G B B B B B B B B B B LEVEL
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -

GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -

CYAN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BASIC
COLOR RED 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -

MAGENTA 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -

WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY ˦
: : : : : : : : : : : : : : : : : : R3~
SCALE
OF R1020
: : : : : : : : : : : : : : : : : :
RED ˨
LIGHT 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1021

0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1022

RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1023

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0

0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1

DARK 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY ˦
SCALE : : : : : : : : : : : : : : : : : : G3~
OF G1020
: : : : : : : : : : : : : : : : : :
GREEN ˨
LIGHT 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1021

0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1022

GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1023

BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 B1

DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 B2
GRAY ˦
: : : : : : : : : : : : : : : : : :
SCALE B3~
OF : : : : : : : : : : : : : : : : : : B1020
BLUE ˨
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 B1021

0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 B1022

BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 B1023

Note) Definition of Gray :

Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X_ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

6. Interface Timing

6.1 Timing Parameters ( DE only mode )

SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE

Clock 1/TC 130 148.5 155 MHz -

Hsync Frequency FH 50 67.5 75 KHz -

Vsync FV 47 60 63 Hz -
Active
Display TVD - 1080 - lines -
Vertical Period
Display Term
Vertical
TVB 1100 1125 1480 Lines -
Total
Active
Display THD - 1920 - clocks -
Horizontal Period
Display Term
Horizontal
TH 2154 2200 2450 clocks -
Total

Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ X` VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

6.2 Timing diagrams of interface signal ( DE only mode )

TV

TVD TVB

DE

TH

THD

DE

DCLK
TC

DATA
SIGNALS

TC
TCH TCL

DCLK 0.5
VCC

TDS TDH

DISPLAY 0.5
DATA
VCC

TES

DE 0.5
VCC

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ YW VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

6.3 Power ON/OFF Sequence

To prevent a latch-up or DC operation of the LCD Module, the power on/off

sequence should be as the diagram below.
90% 90% 90%
VDD
(Panel 12V) 10%
10%
T1
T13
T14
T2 ୔ After T3 time don’t access EDID.
EDID Read T3

T4 T12
LVDS-Rx

T5
FRC_RST(FIXED)

T6

TCON_RDY

T7
VSYNC

T8 T9 T9
DCC_LUT

T11
T10
BL_ON

Unit (ms)
Min Max Min Max Min Max
T1 0.47 10 T6 0 230 T11 100 -
T2 0 100 T7 0 - T12 45 -
T3 0 100 T8 0 - T13 0 300
T4 20 25 T9 0 - T14 1000 -
T5 35 75 T10 500 -

ƒ The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
ƒ Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
ƒ In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
ƒ T14 should be measured after the Module has been fully discharged between power off
and on period.
ƒ Interface signal should not be kept at high impedance when the power is on.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ YX VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

22 / 28
Page
05-000-G-100316
Doc. No
‫ڒ‬. Outline dimension (Front view)

LTY400HF06
OWD733KI39
MODEL

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

23 / 28
Page
05-000-G-100316
Doc. No
Outline dimension (Rear View)

LTY400HF06
OWD733KI39
MODEL

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

8. PACKING

8.1 CARTON (Internal Package)

(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method

Packing Pallet Box

Module (10EA)
Cushion Set

Direction be able to Open

Pallet
8.2 Packing Specification
Item Specification Remark
1. 90Kg/LCD(10ea)
2. 7kg/Cushion Set(2ea)
LCD Packing 10 ea / (Packing-
3. 6.7kg/Packing-Pallet Box(1ea)
Pallet Box)
4. Cushion Material : EPS
5. Packing Pallet Box Material : DW4
Desiccant (Drier) 2ea/LCD 10g/ea, Cobalt-dichloride-free
Pallet 1 Box / Pallet Pallet weight : 8kg
Packing Direction Vertical -

Total Pallet Size H x V x height 1150mm x 985mm x 719mm

Pallet(8kg) + Module( 10 x 9 = 90kg) +

Total Pallet Weight 111.9kg Cushion(7kg) + Pallet-BOX(6.7kg) +
Desiccant(0.02kg x 10 = 0.2kg)

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Y[ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

9. MARKING & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the specified

location on each product.
/7$+)
(1) Parts number : LTY400HF06-XXX
(2) Revision: One letters
(3) Lot number : X X X X XXX XX X

Cell Position No. (In the Glass)

Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
(4) Nameplate Indication Line

Week code : 05 29
OWD733KI39
LTY400HF06
week
year
40mm
[[[[[[ [[[[[[[[[[#########{{{
Revision code
Lot number
LTY400HF06XXX

80mm
(5) Packing box attach

100mm
OWD733KI39
LTY400HF06 Part number

XXX Revision code

10

Box serial number

0703
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Y\ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

10. General Precautions

10.1 Handling

(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.

(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.

(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFT back light.

(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.

(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.

(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.

(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.

Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.

(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.

(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged.

(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.

(k) Do not disassemble the Module.

(l) Do not pull or fold the lamp wire.

(m) Do not adjust the variable resistor located on the Module.

(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized.

(o) Pins of I/F connector should not be touched directly with bare hands.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Y] VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

10.2 Storage

(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35୅
and relative humidity of less than 70%.

(b) Do not store the TFT-LCD Module in direct sunlight.

(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.

10.3 Operation

(a) No Connection or disconnect the Module in the "Power On" condition.

(b) Power supply should always be turned on/off by the "Power on/off sequence"

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).

10.4 Operation Condition Guide

(a) The LCD product should be operated under normal conditions.

Normal condition is defined as below;
- Temperature : 20·15୅
- Humidity : 55·20%
- Display pattern : continually changing pattern (Not stationary)

(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Y^ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

10.5 Others

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.

(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.

(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.

(f) Please contact SEC in advance when you display the same pattern for a long time.

tvkls LTA400HF06
s{€[WWomW] k–ŠUGu– W\TWWWTnTXWWZX] wˆŽŒ Y_ VGY_

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com