Steel Profiles

Materials
The ZOLLERN Group
ZOLLERN is one of the pioneers
of the metal industry. 3,000 employees
at 14 production locations and seven
subsidiaries in Europe, North and South
America and Asia develop, manufacture
and supervise a range of innovative metal
products. ZOLLERN supplies sophisticated
solutions for diverse applications through
its business units drive technology,
plain bearing technology, foundry
technology, mechanical engineering
elements and steel profiles.

Contents Page

Structural steels 4

Free-cutting steels 5

Heat-treated steels 6

Case-hardening steels

unalloyed 9

alloyed 10

Roller bearing steels 12

Tool steels 15

Stainless steels

Ferritic and martensitic steels 16

Austenitic steels 18

Heat-resistant steels 19
 Huge range of materials for first-class steel profiles 02 // 03

Huge range of
materials for first-class
steel profiles

ZOLLERN steel profiles are used for cutting,

moving, guiding, transferring and driving.
There are virtually no limits to the materials
used. The experienced specialists at ZOLLERN
select the ideal material from over 200 differ-
ent steel alloys to create application-specific
and hard-wearing profiles.

ZOLLERN produces hot-rolled, cold-rolled

and cold-drawn steel profiles using flexible,
state-of-the-art plant technology. Profile cross
sections range from 5 to 6,000 mm². ZOLLERN
delivers bars of up to 12 m in length and rings
weighing up to 2 tonnes. We create customer
specific special profiles in our 20,000 m²
production hall. The profiles achieve their
particular properties through the use of
additional processes such as heat treatment,
inductive hardening, mechanical processing
and surface finishing.
Structural steels
Construction steels are used when cost-effective solutions are sought.
The focus here is frequently on weldability and the mechanical properties of the material.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

AISI C Si Mn P S Al N Cu
Material No. EN / ISO ASTM JIS GB % % % % % % % %

1.0122 S235JRC 1015 - Q235B 0.17 1.40 0.040 0.040 0.012 0.55
1.0044 S275JR 1021 SS400 Q255A 0.21 1.50 0.035 0.035 0.012 0.55
1.0533 E295GC GradeA SS490 Q275B 0.045 0.045 0.012
1.0579 S355J2C GradeC - - 0.20 0.55 1.60 0.030 0.030 min. 0.02 0.55
1.0543 E335GC Grade2 SM570 HRB 335 0.045 0.045 0.012
Other materials upon request

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C

Thickness Rp0.2 Rm A5 Hardness

Material No. EN / ISO ASTM JIS GB mm MPa MPa % HB

<= 10 >355 470-840 >8

>10 <=16 >300 420-770 >9
1.0122 S235JRC 1015 - Q235B >16 <=40 >260 390-730 >10
>40 <=63 >235 380-670 >11
>63 <=100 >215 340-640 >11
<= 10 170-250
>10 <=16 170-250
1.0044 S275JR 1021 SS400 Q255A >16 <=40 170-250
>40 <=63 170-250
>63 <=100 170-250
<= 10 >510 650-950 >6
>10 <=16 >420 600-900 >7
1.0533 E295GC GradeA SS490 Q275B >16 <=40 >320 550-850 >8
>40 <=63 >300 520-770 >9
>63 <=100 >255 470-740 >9
<= 10 >250 630-950 >6
>10 <=16 >450 580-880 >7
1.0579 S355J2C GradeC - - >16 <=40 >350 530-850 >8
>40 <=63 >335 500-770 >9
>63 <=100 >315 470-740 >9
<= 10 >540 700-1,050 >5
>10 <=16 >480 680-970 >6
1.0543 E335GC Grade2 SM570 HRB 335 >16 <=40 >390 640-930 >7
>40 <=63 >340 620-870 >8
>63 <=100 >295 570-810 >8
Other materials and treatment states on request
 Construction steels / Free-cutting steels 04 // 05

Free-cutting steels
Free-cutting steels are used wherever efficient machining is required. They achieve their outstanding machinability by the addition of
sulphur and manganese to the alloy. Together, these form manganese sulphide which ensures optimum chip formation. Additives such as
lead, bismuth and tellurium additionally increase the working life of tools. For high-strength components, heat-treatable material variants
can be used.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

AISI C Si Mn P S Pb
Material No. EN / ISO ASTM JIS GB % % % % % %

1.0715 11SMn30 1213 SUM22 0.14 0.05 0.90-1.30 0.11 0.27-0.33

1.0718 11SMnPb30 12L13 SUM22L 0.14 0.05 0.90-1.30 0.11 0.27-0.33 0.20-0.35
1.0736 11SMn37 1215 SUM25 0.14 0.05 1.00-1.50 0.11 0.34-0.40
1.0737 11SMnPb37 12L14 0.14 0.05 1.00-1.50 0.11 0.34-0.40 0.20-0.35
1.0726 35S20 1140 Y35 (U70352) 0.32-0.39 0.40 0.70-1.10 0.06 0.15-0.25
1.0756 35SPb20 0.32-0.39 0.40 0.70-1.10 0.06 0.15-0.25 0.15-0.35
1.0727 46S20 1146 Y45 (U70452) 0.42-0.50 0.40 0.70-1.10 0.06 0.15-0.25
1.0757 46SPb20 0.42-0.50 0.40 0.70-1.10 0.06 0.15-0.25 0.15-0.35
Other materials upon request

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C heat-treated and cold-drawn and

cold-drawn +QT+C heat-treated +C+QT

Thickness Rp0.2 Rm A5 Rp0.2 Rm A5 Rp0.2 Rm A5

Material No. EN / ISO ASTM JIS GB mm MPa MPa % MPa MPa % MPa MPa %

<= 10 >420 510-810 >6

>10 <=16 >410 490-760 >7
1.0715 11SMn30 1213 SUM22
>16 <=40 >375 460-710 >8
1.0718 11SMnPb30 12L13 SUM22L
>40 <=63 >305 400-650 >9
>63 <=100 >245 360-630 >9
<= 10 >440 510-810 >6
>10 <=16 >410 490-760 >7
1.0736 11SMn37 1215
SUM25 >16 <=40 >375 460-710 >8
1.0737 11SMnPb37 12L14
>40 <=63 >305 400-650 >9
>63 <=100 >245 360-630 >9
<= 10 >480 640-880 >6 >490 700-900 >9 - - -
>10 <=16 >400 590-830 >7 >490 700-900 >11 - - -
1.0726 35S20
1140 Y35 (U70352) >16 <=40 >360 560-800 >8 >455 650-850 >12 >380 600-750 >16
1.0756 35SPb20
>40 <=63 >340 530-760 >9 >400 570-770 >13 >320 550-700 >17
>63 <=100 >300 510-680 >9 >385 550-750 >14 >320 550-700 >17
<= 10 >570 740-980 >5 >595 850-1,000 >8 - - -
>10 <=16 >470 690-930 >6 >560 800-950 >9 - - -
1.0727 46S20
1146 Y45 (U70452) >16 <=40 >400 640-880 >7 >490 700-850 >10 >430 650-800 >13
1.0757 46SPb20
>40 <=63 >380 610-850 >8 >490 700-850 >11 >370 630-780 >14
>63 <=100 >340 580-820 >8 >455 650-850 >11 >370 630-780 >14
Other materials and treatment states on request
Tempered steels
Depending on the component requirements, these heat-treated steels are cold formed or heat-treated and cold formed for higher
requirements. If the focus is on toughness, it is possible to heat-treat even the finished component at any time.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated
AISI C Si Mn P S Cr Mo Ni V
Material No. EN/ISO ASTM JIS GB % % % % % % % % %

1.0402 C22 1020 S20C 0.17-0.24 0.40 0.40-0.70 0.045 0.045 0.40 0.10 0.40

1.1151 C22E 1023 S22C 20 (U20202) 0.17-0.24 0.40 0.40-0.70 0.030 0.035 0.40 0.10 0.40

1.1149 C22R 0.17-0.24 0.40 0.40-0.70 0.030 0.02-0.04 0.40 0.10 0.40

1.0501 C35 1035 S35C 0.32-0.39 0.40 0.50-0.80 0.045 0.045 0.40 0.10 0.40

1.1181 C35E 1035 S35C 35 (U20352) 0.32-0.39 0.40 0.50-0.80 0.030 0.035 0.40 0.10 0.40

1.1180 C35R 1035 0.32-0.39 0.40 0.50-0.80 0.030 0.02-0.04 0.40 0.10 0.40

1.0503 C45 1045 S45C 0.42-0.50 0.40 0.50-0.80 0.045 0.045 0.40 0.10 0.40

1.1191 C45E 1045 S45C 45 (U20452) 0.42-0.50 0.40 0.50-0.80 0.030 0.035 0.40 0.10 0.40

1.1201 C45R 1045 0.42-0.50 0.40 0.50-0.80 0.030 0.02-0.04 0.40 0.10 0.40

1.1213 C53G 1050 S50C 0.50-0.57 0.15-0.35 0.40-0.70 0.025 0.035

1.0535 C55 1055 S55C 0.52-0.60 0.40 0.60-0.90 0.045 0.045 0.40 0.10 0.40

1.1203 C55E 1055 S55C 55 (U20552) 0.52-0.60 0.40 0.60-0.90 0.030 0.035 0.40 0.10 0.40

1.1209 C55R 1055 0.52-0.60 0.40 0.60-0.90 0.030 0.02-0.04 0.40 0.10 0.40

1.0601 C60 1060 S65CM 0.57-0.65 0.40 0.60-0.90 0.045 0.045 0.40 0.10 0.40

1.1221 C60E 1060 60 (U20602) 0.57-0.65 0.40 0.60-0.90 0.030 0.035 0.40 0.10 0.40

1.1223 C60R 1060 0.57-0.65 0.40 0.60-0.90 0.030 0.02-0.04 0.40 0.10 0.40

1.8159 51CrV4 6150 SUP10 50CrVA 0.47-0.55 0.40 0.70-1.10 0.025 0.025 0.90-1.20 0.10-0.25

Other materials upon request

 Tempered steels 06 // 07

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold- cold-drawn annealed cold-drawn

drawn and and and and
annealed normalised cold-drawn annealed
+C+A +C+N +QT+C +C+QT
Material EN/ Thickness Rp0.2 Rm A5 Hardness Hardness Rp0.2 Rm A5 Rp0.2 Rm A5 Rp0.2 Rm A5
No. ISO ASTM JIS GB mm MPa MPa % HB HB MPa MPa % MPa MPa % MPa MPa %

1.0402 C22 1020 S20C <16 >240 >430 >24

1.1151 C22E 1023 S22C 20 (U20202) 16-100 >210 >410 >25

1.1149 C22R

<= 10 >510 650-1,000 >6 >525 750-950 >9 - - -

>10 <=16 >420 600-950 >7 >490 700-900 >9 - - -

1.0501 C35 1035
S35C
1.1181 C35E 1035 35 (U20352) >16 <=40 >320 580-880 >8 >455 650-850 >10 >370 600-750 >19
S35C
1.1180 C35R 1035
>40 <=63 >300 550-840 >9 >400 570-770 >11 >320 550-700 >20

>63 <=100 >270 520-800 >9 >385 550-750 >12 >320 550-700 >20

<= 10 >565 750-1,050 >5 >595 850-1,050 >8 - - -

>10 <=16 >500 710-1,030 >6 >565 810-1,010 >8 - - -

1.0503 C45 1045
S45C
1.1191 C45E 1045 45 (U20452) >16 <=40 >410 650-1,000 >7 >525 750-950 >9 >430 650-800 >16
S45C
1.1201 C45R 1045
>40 <=63 >360 630-900 >8 >455 650-850 >10 >370 630-780 >17

>63 <=100 >310 580-850 >8 >455 650-850 >11 >370 630-780 >17

1.1213 C53G 1050 S50C - <223 >340 >610 >16

<= 10 >590 770-1,100 >5 <229 >370 >680 >11

>10 <=16 >520 730-1,080 >6 <229 >370 >680 >11

1.0535 C55 1055
S55C
1.1203 C55E 1055 55 (U20552) >16 <=40 >440 690-1,050 >7 <229 >330 >640 >12
S55C
1.1209 C55R 1055
>40 <=63 >390 650-1,030 >8 <229 >330 >640 >12

>63 <=100 - - - - >330 >640 >12

<= 10 >630 800-1,150 >5 >630 900-1,000 >6 - - -

>10 <=16 >550 780-1,130 >5 >615 880-1,080 >6 - - -

1.0601 C60 1060
1.1221 C60E 1060 S65CM 60 (U20602) >16 <=40 >480 730-1,100 >6 >580 830-1,030 >7 >520 800-950 >13
1.1223 C60R 1060
>40 <=63 - - - >545 780-980 >8 >450 750-900 >14

>63 <=100 - - - >525 750-950 >8 >450 750-900 >14

<= 10 <311 >900 1,100-1,300 >9

>10 <=16 <311 >900 1,000-1,200 >9

1.8159 51CrV4 6150 SUP10 50CrVA >16 <=40 <293 >800 1,000-1,200 >10

>40 <=63 <287 >700 900-1,100 >12

>63 <=100 <287 >700 900-1,100 >12

Other materials and treatment states on request

 Case-hardening steels – unalloyed 08 // 09

Case-hardening steels – unalloyed

Case-hardening steels are used for components requiring a high degree of toughness at their core and a high degree of wear resistance
at the surface. These properties are achieved and adjusted by case hardening or carbonitriding the outer layer.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values
unless otherwise indicated

AISI C Si Mn P S
Material No. EN / ISO ASTM JIS GB % % % % %

1.0301 C10 1010 S10C DX1 (U59110) 0.07-0.13 0.40 0.30-0.60 0.045 0.045

1.1121 C10E 1010 S10C DX1 (U59110) 0.07-0.13 0.40 0.30-0.60 0.035 0.035

1.1207 C10R 1010 S10C DX1 (U59110) 0.07-0.13 0.40 0.30-0.60 0.035 0.02-0.04

1.0401 C15 1015 S15C 0.12-0.18 0.40 0.30-0.80 0.045 0.045

1.1141 C15E 1015 S15C 15 (U20152) 0.12-0.18 0.40 0.30-0.80 0.035 0.035

1.1140 C15R 1015 0.12-0.18 0.40 0.30-0.80 0.035 0.02-0.04

Other materials upon request

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold-drawn and

normalised +C+N

Thickness Rp0.2 Rm A5 Hardness Hardness

Material No. EN / ISO ASTM JIS GB mm MPa MPa % HB HB

<= 10 >350 460-760 >8 <225 85-140

>10 <=16 >300 430-730 >9 <216 85-140

1.0301 C10 1010 S10C DX1 (U59110)
1.1121 C10E 1010 S10C DX1 (U59110) >16 <=40 >250 400-700 >10 <207 85-140
1.1207 C10R 1010 S10C DX1 (U59110)
>40 <=63 >200 350-640 >12 <190 85-140

>63 <=100 >180 320-580 >12 <172 85-140

<= 10 >380 500-800 >7 <238 95-150

>10 <=16 >340 480-780 >8 <231 95-150

1.0401 C15 1015
S15C
1.1141 C15E 1015 15 (U20152) >16 <=40 >280 430-730 >9 <216 95-150
S15C
1.1140 C15R 1015
>40 <=63 >240 380-670 >11 <219 95-150

>63 <=100 >215 340-600 >12 <178 95-150

Other materials and treatment states on request

Case-hardening steels – alloyed
Case-hardening steels are used for components requiring a high degree of toughness at their core and a high degree of wear resistance at
the surface. These properties are achieved and adjusted by case hardening or carbonitriding the outer layer.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

Material AISI C Si Mn P S Cr Mo Ni Al N Cu
No. EN / ISO ASTM JIS GB % % % % % % % % % % %

1.7131 16MnCr5 5117 20CrMn 0.14-0.19 0.40 1.00-1.30 0.025 0.035 0.80-1.10

1.7139 16MnCrS5 0.14-0.19 0.40 1.00-1.30 0.025 0.02-0.04 0.80-1.10

1.7147 20MnCr5 5120 SMnC420H 20CrMn 0.17-0.22 0.40 1.10-1.40 0.025 0.035 1.00-1.30

1.7149 20MnCrS5 0.17-0.22 0.40 1.10-1.40 0.025 0.02-0.04 1.00-1.30

1.5918 17CrNi6-6 0.14-0.20 0.40 0.50-0.90 0.025 0.035 1.40-1.70 1.40-1.70

1.5919 15CrNi6 4320 0.12-0.18 0.25 0.40-0.70 0.020 0.015 1.35-1.65 1.35-1.65 0.025-0.05 0.012 0.20

1.5920 18CrNi8 0.15-0.20 0.15-0.40 0.40-0.60 0.035 0.035 1.80-2.10 1.80-2.10

1.5715 16NiCrS4 0.13-0.19 0.40 0.70-1.00 0.025 0.02-0.04 0.60-1.00 0.80-1.10

1.6523 20NiCrMo2-2 8620 SNCM220 20CrNiMo 0.17-0.23 0.40 0.65-0.95 0.025 0.035 0.35-0.70 0.15-0.25 0.40-0.70

1.6526 20NiCrMoS2-2 8620 0.17-0.23 0.40 0.65-0.95 0.025 0.02-0.04 0.35-0.70 0.15-0.25 0.40-0.70

1.5752 15NiCr16 3312 SNC815 0.14-0.20 0.40 0.40-0.70 0.025 0.035 0.60-0.90 3.00-3.50

Other materials upon request

 Case-hardening steels – alloyed 10 // 11

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold-drawn and cold-drawn and

annealed +C+A normalised +C+N

Material Thickness Hardness Hardness Hardness

No. EN / ISO ASTM JIS GB mm HB HB HB

<= 10 <260 <207 140-187

>10 <=16 <250 <207 140-187
1.7131 16MnCr5
5117 20CrMn >16 <=40 <245 <207 140-187
1.7139 16MnCrS5
>40 <=63 <240 <207 140-187
>63 <=100 <240 <207 140-187
<= 10 <270 <217 152-201
>10 <=16 <260 <217 152-201
1.7147 20MnCr5
5120 SMnC420H 20CrMn >16 <=40 <255 <217 152-201
1.7149 20MnCrS5
>40 <=63 <250 <217 152-201
>63 <=100 <250 <217 152-201
<= 10 <229 175-229
>10 <=16 <229 175-229
1.5918 17CrNi6-6 >16 <=40 <229 175-229
>40 <=63 <229 175-229
>63 <=100 <229 175-299
<= 10 <229
>10 <=16 <229
1.5919 15CrNi6 4320 >16 <=40 <229
>40 <=63 <229
>63 <=100 <229
<= 10
>10 <=16
1.5920 18CrNi8 >16 <=40
>40 <=63
>63 <=100
<= 10 <270
>10 <=16 <260
1.5715 16NiCrS4 >16 <=40 <255 156-207
>40 <=63 <255 156-207
>63 <=100 <255 156-207
<= 10 <212 161-212
>10 <=16 <212 161-212
1.6523 20NiCrMo2-2 8620 SNCM220 20CrNiMo >16 <=40 <212 161-212
>40 <=63 <212 161-212
>63 <=100 <212 161-212
<= 10 <270 149-194
>10 <=16 <260 149-194
1.6526 20NiCrMoS2-2 8620 >16 <=40 <255 149-194
>40 <=63 <255 149-194
>63 <=100 <255 149-194
<= 10 <229 179-229
>10 <=16 <229 179-229
1.5752 15NiCr13 3312 SNC815 >16 <=40 <229 179-229
>40 <=63 <229 179-229
>63 <=100 <229 179-229
Other materials and treatment states on request
Roller bearing steels
Roller bearing steels are frequently used for the production of parts for the linear and roller bearing industry. Since roller bearings are
subject to heavy stresses, high-strength steels of great purity are required. These steels achieve their wear resistance through the
hardening or surface layer hardening of the areas exposed to high loads. This combination of properties provides advantages in particular
in the linear and automation fields.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

Material AISI C Si Mn P S Cr Mo Ni V Al Cu
No. EN/ISO ASTM JIS GB % % % % % % % % % % %

1.1213 C53G 1050 S50C 0.50-0.57 0.15-0.35 0.40-0.70 0.025 0.035

1.1219 C56E2 S55C 0.52-0.60 0.40 0.60-0.90 0.025 0.015 0.050 0.30

1.3505 100Cr6 SUJ2 GCr15 0.93-1.05 0.15-035 0.25-0.45 0.025 0.015 1.35-1.60 0.10 0.050 0.30

1.3536 100CrMo7-3 K19965 0.93-1.05 0.15-0.35 0.60-0.80 0.025 0.015 1.65-1.95 0.20-0.35 0.050 0.30

1.3541 X47Cr14 0.43-0.50 1.00 1.00 0.04 0.015 12.5-14.5

1.3542 X65Cr14 0.60-0.70 1.00 1.00 0.04 0.015 12.5-14.5 0.75

1.3567 20CrMo4 0.17-0.23 0.040 0.60-0.80 0.025 0.015 0.90-1.20 0.15-0.25 0.050 0.30

1.6587 18CrNiMo7-6 4320H 0.17-0.23 0.15-0.35 0.40-0.70 0.035 0.040 0.35-0.65 0.20-0.30 1.4-1.7 0.30

1.7792 58CrMoV4 0.58-0.62 0.20-0.30 0.80-0.95 0.020 0.010 0.90-1.05 0.15-0.20 0.10-0.15 0.14

Other materials upon request

 Roller bearing steels 12 // 13

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold-drawn and anne- cold-drawn and

aled +C+AC normalised +C+N

Material Thickness Hardness Hardness Hardness

No. EN / ISO ASTM JIS GB mm HB HB HB

1.1213 C53G 1,050 S50C - <223

<= 10 <260 <230
>10 <=16 <260 <230
1.1219 C56E2 S55C >16 <=40 <260 <230
>40 <=63 <260 <230
>63 <=100 <260 <230
<= 10 <240
>10 <=16 <240
1.3505 100Cr6 SUJ2 GCr15 >16 <=40 <240
>40 <=63 <240
>63 <=100 <240
<= 10 <230
>10 <=16 <230
1.3536 100CrMo7-3 K19965 >16 <=40 <230
>40 <=63 <230
>63 <=100 <230
<= 10 <298 <248
>10 <=16 <298 <248
1.3541 X47Cr14 >16 <=40 <298 <248
>40 <=63 <298 <248
>63 <=100 <298 <248
<= 10 <305 <255
>10 <=16 <305 <255
1.3542 X65Cr14 >16 <=40 <305 <255
>40 <=63 <305 <255
>63 <=100 <305 <255
<= 10 <255 <207 <195
>10 <=16 <255 <207 <195
1.3567 20CrMo4 >16 <=40 <255 <207 <195
>40 <=63 <255 <207 <195
>63 <=100 <255 <207 <195
<= 10 <255 <179 <210
>10 <=16 <255 <179 <210
1.6587 18CrNiMo7-6 4320H >16 <=40 <255 <179 <210
>40 <=63 <255 <179 <210
>63 <=100 <255 <179 <210
<= 10 <295 <230
>10 <=16 <295 <230
1.7792 58CrMoV4 >16 <=40 <295 <230
>40 <=63 <295 <230
>63 <=100 <295 <230
Other materials and treatment states on request
 Tool steels 14 // 15

Tool steels
Tool steels are high-grade steels suitable for the processing and finishing of materials, for handling equipment and for the measuring of
workpieces. They demonstrate the high degree of hardness required for the application plus great wear resistance and toughness.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

Material AISI C Si Mn P S Cr Mo Ni V
No. EN/ISO ASTM JIS GB % % % % % % % % %

1.2067 102Cr6 L3 SUJ2 Cr2 (T30201) 0.95-1.10 0.15-0.35 0.25-0.45 0.030 0.030 1.35-1.65

1.2210 115CrV3 L2 1.10-1.25 0.15-0.30 0.20-0.40 0.030 0.030 0.50-0.80 0.07-0.12

1.2242 59CrV4 0.55-0.62 0.15-0.35 0.80-1.10 0.035 0.035 0.90-1.20 0.07-0.12

1.2764 X19NiCrMo4 0.16-0.22 0.10-0.40 0.15-0.45 0.030 0.030 1.10-1.40 0.15-0.25 3.80-4.30

Other materials upon request

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold-drawn and annealed +C+A

Material Thickness Hardness Rm Hardness

No. EN / ISO ASTM JIS GB mm HB MPa HB

<= 10 <245 <225

>10 <=16 <245 <225
1.2067 102Cr6 L3 SUJ2 Cr2 (T30201) >16 <=40 <245 <225
>40 <=63 <245 <225
>63 <=100 <245 <225
<= 10 <710 <210
>10 <=16 <710 <210
1.2210 115CrV3 L2 >16 <=40 <710 <210
>40 <=63 <710 <210
>63 <=100 <710 <210
<= 10 <760 <225
>10 <=16 <760 <225
1.2242 59CrV4 >16 <=40 <760 <225
>40 <=63 <760 <225
>63 <=100 <760 <225
<= 10 <710 <230
>10 <=16 <710 <230
1.2764 X19NiCrMo4 >16 <=40 <710 <230
>40 <=63 <710 <230
>63 <=100 <710 <230

Other materials and treatment states on request

Stainless steels –
ferritic and martensitic steels
Their resistance to corrosion sets stainless steels apart from other variants. They have a chrome content of at least 10.5 percent. These
steels are selected specifically for the application and to suit the aggressive environment.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

Material AISI C Si Mn P S Cr Mo Ni
No. EN/ISO ASTM JIS GB % % % % % % % %

1.4000 X6Cr13 403 SUS403 0Cr13 0.08 1.00 1.00 0.040 0.015 12.0-14.0

1.4006 X12Cr13 410 SUS410 12Cr12 0.08-0.15 1.00 1.50 0.040 0.015 11.5-13.5 0.75

1.4021 X20Cr13 420 SUS420J1 2Cr13 0.16-0.25 0.10 1.50 0.040 0.015 12.0-14.0

1.4024 X15Cr13 Grade410 SUS410J1 1Cr13 0.12-0.17 1.00 1.00 0.040 0.015 12.0-14.0

1.4034 X46Cr13 0.43-0.50 1.00 1.00 0.040 0.015 12.0-14.5

1.4037 X65Cr13 0.58-0.70 1.00 1.00 0.040 0.015 12.5-14.5

1.4057 X17CrNi16-2 431 SUS431 1Cr17Ni2 0.12-0.22 1.00 1.50 0.040 0.015 15.0-17.0 1.50-2.50

1.4104 X14CrMoS17 430F SUS430F Y1Cr17 0.10-0.17 1.00 1.50 0.040 0.15-0.35 15.5-17.5 0.20-0.60

1.4113 X6CrMo17-1 434 SUS434 10Cr17Mo 0.08 1.00 1.00 0.040 0.015 16.0-18.0 0.90-1.40

Other materials upon request

 Stainless steels – ferritic and martensitic steels 16 // 17

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold-drawn and annealed +C+A or +C+AT cold-drawn and
heat-treated +C+QT

Thickness Rp0.2 Rm A5 Thickness Rp0.2 Rm A5 Hardness Rp0.2 Rm A5

Material No. EN / ISO ASTM JIS GB mm MPa MPa % mm MPa MPa % HB MPa MPa %

1.4000 X6Cr13 403 SUS403 0Cr13 <25 <25 >230 400-630 >20 <200 >400 550-700 >18
<= 10 <= 10 <880 <280 >450 650-850 >15
>10 <=16 >10 <=16 <880 <280
1.4006 X12Cr13 410 SUS410 12Cr12 >16 <=40 >16 <=40 <800 <250
>40 <=63 >40 <=63 <760 <230
>63 <=100 >63 <=100 <730 <220
<= 10 <= 10 <910 <290 >600 750-1,000 >8
>10 <=16 >10 <=16 <910 <290 >550 750-1,000 >8
1.4021 X20Cr13 420 SUS420J1 2Cr13 >16 <=40 >16 <=40 <850 <260 >500 700-950 >10
>40 <=63 >40 <=63 <800 <250 >500 700-900 >12
>63 <=100 >63 <=100 <760 <230 >500 700-850 >13
<= 10 <= 10 <950 <305 >700 900-1,150 >7
>10 <=16 >10 <=16 <950 <305 >700 900-1,150 >7
1.4034 X46Cr13 >16 <=40 >16 <=40 <900 <280 >650 850-1,100 >8
>40 <=63 >40 <=63 <840 <260 >650 850-1,000 >8
>63 <=100 >63 <=100 <800 <245 >650 850-1,000 >10
<= 10 <= 10 <840 <265
>10 <=16 >10 <=16 <840 <265
1.4037 X65Cr13 >16 <=40 >16 <=40 <840 <265
>40 <=63 >40 <=63 <840 <265
>63 <=100 >63 <=100 <840 <265
<= 10 <= 10
>10 <=16 >10 <=16
1.4057 X17CrNi16-2 431 SUS431 1Cr17Ni2 >16 <=40 >16 <=40
>40 <=63 >40 <=63
>63 <=100 >63 <=100
<= 10 <880 <280 >580 700-980 >7
Tensile >10 <=16 <880 <280 >530 700-980 >7
strength
1.4104 X14CrMoS17 430F SUS430F Y1Cr17 >440 550-750 >15 >16 <=40 <800 <250 >500 650-930 >9
grade
+C550 >40 <=63 <760 <230 >500 650-880 >10
>63 <=100 <730 <220 >500 650-850 >10
<= 10 >340 540-700 >8 <100 <280 440-660 <18 <200
>10 <=16 >320 500-700 >12
1.4113 X6CrMo17-1 434 SUS434 10Cr17Mo >16 <=40 >280 440-700 >15
>40 <=63 >280 440-700 >15
>63 <=100 >280 440-660 >18

Other materials and treatment states on request

Stainless steels –
austenitic steels
Stainless steels are very corrosion resistant. They have a chrome content of at least 10.5 percent.
These steels are selected specifically for the application and to suit the aggressive environment.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

Material AISI C Si Mn P S Cr Mo Ni Cu Ti
No. EN/ISO ASTM JIS GB % % % % % % % % % %

1.4301 X5CrNi18-10 304 SUS304 06Cr19Ni10 0.07 1.00 2.00 0.045 0.030 17.5-19.5 8.00-10.5

1.4305 X8CrNiS18-9 303 SUS303 Y12Cr18Ni9 0.10 1.00 2.00 0.045 0.15-0.35 17.0-19.0 8.00-10.0 1.00

1.4401 X5CrNiMo17-12-2 316 SUS316 06Cr17Ni12Mo2 0.07 1.00 2.00 0.045 0.015 16.5-18.5 2.00-2.50 10.0-13.0

1.4404 X2CrNiMo17-12-2 0.03 1.00 2.00 0.045 0.030 16.5-18.5 2.00-2.50 10.0-13.0

1.4541 X6CrNiTi18-10 321 SUS321 0Cr18Ni10Ti 0.08 1.00 2.00 0.045 0.015 17.0-19.0 9.00-12.0 0.700

Other materials upon request

Guideline mechanical values in the various treatment states

Designation Similar materials States

cold-drawn +C cold-drawn and annealed +C+A or +C+AT

Thickness Rp0.2 Rm A5 Thickness Rp0.2 Rm A5 Hardness

Material No. EN / ISO ASTM JIS GB mm MPa MPa % mm MPa MPa % HB

+C700 >350 700-850 >20 <160 >190 500-700 >45 <215

1.4301 X5CrNi18-10 304 SUS304 06Cr19Ni10
+C800 >500 800-1,000 >12

+C700 >350 700-850 >20 <160 >190 500-750 >35 <230

1.4305 X8CrNiS18-9 303 SUS303 Y12Cr18Ni9
+C800 >20 800-1,000 >12

+C700 >350 700-850 >20 <160 >200 500-700 >40 <215

1.4401 X5CrNiMo17-12-2 316 SUS316 06Cr17Ni12Mo2
+C800 >500 800-1,000 >12

+C700 >350 700-850 >20 <160 >200 500-700 >40 <215

1.4404 X2CrNiMo17-12-2
+C800 >500 800-1,000 >12

+C700 >350 700-850 >20 <160 >190 500-700 >40 <215

1.4541 X6CrNiTi18-10 321 SUS321 0Cr18Ni10Ti
+C800 >500 800-1,000 >12

Other materials and treatment states on request

 Stainless steels – austenitic steels / Heat-resistant steels 18 // 19

Heat-resistant steels
Heat-resistant steels retain their properties at temperatures of up to 580° C.
Highly heat-resistant steels remain stable up to approximate 800° C.

Chemical composition

Designation Similar materials Alloy base Fe, all values shown are maximum values unless otherwise indicated

Material AISI C Si Mn P S Cr Mo Ni V N Ti
No. EN/ISO ASTM JIS GB % % % % % % % % % % %

17.0- 9.0-
1.4878 X8CrNiTi18-10 321 SUS321 1Cr18Ni9Ti 0.10 1.00 2.00 0.045 0.015 0.800
19.0 12.0

21Cr12MoV 0.18- 0.40- 11.0- 0.80- 0.30- 0.25-

1.4923 X22CrMoV12-1 AMS 5,655 0.50 0.025 0.015
(S46020) 0.24 0.90 12.5 1.20 0.80 0.35

07Cr19Ni10 0.04- 17.0- 8.00-

1.4948 X6CrNi18-10 304H SUS302 1.00 2.00 0.035 0.015 0.10
(S30409) 0.08 19.0 11.0

Other materials upon request

Product portfolio and technical data

Profile types
hot-rolled, cold-rolled, cold-drawn, induction-hardened

Cross sections
Profile cross sections 5 to 7,650 mm²
(40 g/m to 60 kg/m)

Availability
Bars up to 12 m, rings up to 2 t

Dimensional tolerances
from 30 µm

Surface roughness
from Rz 5 μm

Materials
Structural steels, free-machining steels, case-hardened steels,
heat-treated steels, roller bearing steels, tool steels, stainless steels

Processing
Heat treatment, induction hardening with achievable surface
hardnesses of up to 64 HRC, ready-to-fit components including
mechanical processing and surface finishing
 Photos: 123RF – Title, Solovyov Andriy – p.14, Laurentiu Iordache
© ZOLLERN I 01.18 I 111 I www.creaktiv-werbung.com Errors and amendments excepted. Pictures and illustrations similar.
Group headquarters

Subsidiaries & local offices

Plants

ZOLLERN GmbH & Co. KG

Hitzkofer Strasse 1
72517 Sigmaringendorf-Laucherthal
Germany
T +49 7571 70-0
F +49 7571 70-602
[email protected]
www.zollern.com