ENGLISH

ITALIANO
ESPAÑOL
FRANCAIS
DEUTSCH
PORTUGUESE
OWNER’S MANUAL
AIR CONDITIONER ΕΛΛΗΝΙΚΆ
NEDERLANDS

Please read this manual carefully before operating

your set and retain it for future reference.

TYPE : CEILING CONCEALED DUCT

www.lg.com

P/NO : MFL42619119
 TABLE OF CONTENTS
FOR YOUR RECORDS
Safety Precautions.................3 Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Prior to Operation ..................6
Dealer's Name
Date Purchased
n Staple your receipt to this page in the event you need
Product Introduction..............7 it to prove date of purchase or for warranty issues.

Operating Instructions.........10 READ THIS MANUAL

Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
Maintenance and Service ....22 of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
Before you Call chart of troubleshooting tips. If you review our chart of
for Service ..........................24 Troubleshooting Tips first, you may not need to call
for service at all.

PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
• Installation work must be performed in accordance with
the National Electric Code by qualified and authorized
personnel only.

2 Indoor Unit
 Safety Precautions

ENGLISH
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be
followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
by the following indications.

WARNING This symbol indicates the possibility of death or serious injury.

CAUTION This symbol indicates the possibility of injury or damage to properties only.

n Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

WARNING
n Installation
Do not use a defective or For electrical work, contact the Always ground the product.
underrated circuit breaker. Use dealer, seller, a qualified
this appliance on a dedicated electrician, or an Authorized
circuit. Service Center.
• There is risk of fire or electric • Do not disassemble or repair the • There is risk of fire or electric
shock. product. There is risk of fire or shock.
electric shock.

Install the panel and the cover Always install a dedicated Use the correctly rated breaker
of control box securely. circuit and breaker. or fuse.
• There is risk of fire or electric • Improper wiring or installation • There is risk of fire or electric
shock. may cause fire or electric shock shock.

Do not modify or extend the Do not install, remove, or re- Be cautious when unpacking
power cable. install the unit by yourself and installing the product.
(customer).
• There is risk of fire or electric • There is risk of fire, electric shock, • Sharp edges could cause injury.
shock. explosion, or injury. Be especially careful of the case
edges and the fins on the
condenser and evaporator.

For installation, always contact Do not install the product on a Be sure the installation area
the dealer or an Authorized defective installation stand. does not deteriorate with age.
Service Center.
• There is risk of fire, electric shock, • It may cause injury, accident, or • If the base collapses, the air
explosion, or injury. damage to the product. conditioner could fall with it,
causing property damage,
product failure, and personal
injury.

Ownerʼs Manual 3
Safety Precautions

n Operation
Do not let the air conditioner Take care to ensure that power Do not place anything on the
run for a long time when the cable could not be pulled out or power cable.
humidity is very high and a damaged during operation.
door or a window is left open.
• Moisture may condense and wet • There is risk of fire or electric • There is risk of fire or electric
or damage furniture. shock. shock.

Do not plug or unplug the Do not touch(operate) the Do not place a heater or other
power supply plug during product with wet hands. appliances near the power
operation. cable.
• There is risk of fire or electric • There is risk of fire or electrical • There is risk of fire and electric
shock. shock. shock.

Do not allow water to run into Do not store or use flammable Do not use the product in a
electric parts. gas or combustibles near the tightly closed space for a long
product. time.
• It may cause There is risk of fire, • There is risk of fire or failure of • Oxygen deficiency could occur.
failure of the product, or electric product.
shock.
When flammable gas leaks, If strange sounds, or small or Stop operation and close the
turn off the gas and open a smoke comes from product. window in storm or hurricane.
window for ventilation before Turn the breaker off or If possible, remove the product
turn the product on. disconnect the power supply from the window before the
cable. hurricane arrives.
• Do not use the telephone or turn • There is risk of electric shock or • There is risk of property damage,
switches on or off. fire. failure of product, or electric
There is risk of explosion or fire shock.

Do not open the inlet grill of the When the product is soaked Be cautious that water could
product during operation. (flooded or submerged), not enter the product.
(Do not touch the electrostatic contact an Authorized Service
filter, if the unit is so equipped.) Center.
• There is risk of physical injury, • There is risk of fire or electric • There is risk of fire, electric shock,
electric shock, or product failure. shock. or product damage.

Ventilate the product from time to time when Turn the main power off when cleaning or
operating it together with a stove, etc. maintaining the product.
• There is risk of fire or electric shock. • There is risk of electric shock.

When the product is not be used for a long time, Take care to ensure that nobody could step on or
disconnect the power supply plug or turn off the fall onto the outdoor unit.
breaker.
• There is risk of product damage or failure, or • This could result in personal injury and product
unintended operation. damage.

4 Indoor Unit
 Safety Precautions

ENGLISH
CAUTION
n Installation
Always check for gas (refrigerant) Install the drain hose to ensure Keep level even when installing
leakage after installation or repair that water is drained away the product.
of product. properly.
• Low refrigerant levels may • A bad connection may cause • To avoid vibration or water
cause failure of product. water leakage. leakage.
Do not install the product where the noise Use two or more people to lift and Do not install the product where
or hot air from the outdoor unit could transport the product. it will be exposed to sea wind
damage the neighborhoods. (salt spray) directly.
• It may cause a problem for your • Avoid personal injury. • It may cause corrosion on the product.
neighbors. Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation.
n Operation
Do not expose the skin directly Do not use the product for special Do not block the inlet or outlet
to cool air for long periods of purposes, such as preserving foods, of air flow.
time. (Don't sit in the draft.) works of art, etc. It is a consumer air
conditioner, not a precision
refrigeration system.
• This could harm to your health. • There is risk of damage or loss • It may cause product failure.
of property.

Use a soft cloth to clean. Do Do not touch the metal parts of the Do not step on or put anyting
not use harsh detergents, product when removing the air on the product. (outdoor units)
solvents, etc. filter. They are very sharp!
• There is risk of fire, electric • There is risk of personal injury. • There is risk of personal injury
shock, or damage to the plastic and failure of product.
parts of the product.

Always insert the filter securely. Do not insert hands or other objects Do not drink the water drained
Clean the filter every two weeks through the air inlet or outlet while the from the product.
or more often if necessary. product is operated.
• A dirty filter reduces the efficiency of • There are sharp and moving parts • It is not sanitary and could cause
the air conditioner and could cause that could cause personal injury. serious health issues.
product malfunction or damage.

Use a firm stool or ladder when Replace the all batteries in the Do not recharge or
cleaning or maintaining the remote control with new ones of disassemble the batteries.
product. the same type. Do not mix old and Do not dispose of batteries in a
new batteries or different types of fire.
batteries.
• Be careful and avoid personal • There is risk of fire or explosion • They may burn or explode.
injury.

If the liquid from the batteries gets onto your skin If you eat the liquid from the batteries, brush your
or clothes, wash it well with clean water. Do not teeth and see doctor. Do not use the remote if the
use the remote if the batteries have leaked. batteries have leaked.
• The chemicals in batteries could cause burns or • The chemicals in batteries could cause burns or
other health hazards. other health hazards.

Ownerʼs Manual 5
Prior to Operation

Prior to Operation
Preparing for operation
1. Contact an installation specialist for installation.
2. Use a dedicated circuit.

Usage
1. Being exposed to direct airflow for an extended period of time could be hazardous to your health.
Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or
other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
devices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates
at a very high speed during operation. There is a possibility of injury if the unitʼs power is
accidentally triggered on while cleaning inner parts of the unit.

Service
For repair and maintenance, contact your authorized service dealer.

6 Indoor Unit
 Product Introduction

ENGLISH
Product Introduction
Name and function of parts
1 1: Indoor unit
4
Air intake
vents 6 7 2: Outdoor unit
3: Remote controller
2 4: Inlet air
5: Discharge air
5
6: Refrigerant piping, connection
Air outlet
vents
Remote electric wire
Controller
3 7: Drain pipe
8: Ground wire
wire to ground outdoor unit to
prevent electrical shocks.

What to do before operation

Pair system or Simultaneous operation system If your installation has a customized
control system, ask your LG dealer for
the operation that corresponds to your
system.

1: Unit with remote controller

2: Unit without remote controller (when
used as simultaneous operation)

Multi system

Ownerʼs Manual 7
Product Introduction

Wired Remote Controller

1 OPERATION INDICATION
SCREEN
1 2 SET TEMPERATURE BUTTON
10 3 FAN SPEED BUTTON
9 4 ON/OFF BUTTON
8 2
5 OPRATION MODE SELECTION
3
7 BUTTON
4
11 6 WIRELESS REMOTE
12 5 CONTROLLER RECEIVER
13 6 • Some products don't receive the
wireless signals.
14
15
7 AIR FLOW BUTTON
8 SUBFUNCTION BUTTON
9 FUNCTION SETTING BUTTON
10 VENTILATION BUTTON
11 RESERVATION
12 UP,DOWN,LEFT,RIGHT BUTTON
Please attach the inform label inside of the door. • To check the indoor temperature,
Please choose proper language depend on your press button.
country.
13 ROOM TEMPERATURE BUTTON
14 SETTING/CANCEL BUTTON
15 EXIT BUTTON

j Some functions may not be operated and displayed depending on the product type.

NOTE
h Display temperature can be different from actual room temperature if the remote controller is installed at the
place where sun-rays are falling directly or the place nearby heat source.
h The actual product can be different from above contents depending upon model type.
h When using simultaneous operation system, whenever press remote controller button, system will
approximately operate after 1~2 minutes.

8 Indoor Unit
 Product Introduction

ENGLISH
Wireless Remote Controller (Accessory)
This air-conditioner is equipped with wired remote controller basically. But if you want to be available
with wireless remote controller, you pay for it.

PQWRHDF0

CAUTION
• Aim at the signal receiver on the wired remote controller so as to operate.
• The remote control signal can be received at a distance of up to about 7m.
• Be sure that there are no obstructions between the remote controller and the signal
receptor.
• Do not drop or throw the remote controller.
• Do not place the remote controller in a location exposed to direct sunlight, or near the
heating unit, or any other heat source.
• Block a strong light over the signal receptor with a curtain or etc. so as to prevent the
abnormal operation. (ex:electronic quick start, ELBA, inverter type fluorescent lamp)
NOTE
h For more details refer to the Wireless Remote Control Accessory manual.
h The actual product can be different from above contents depending upon model type.
h The wireless remote controller does not operate When using simultaneous operation system.

Ownerʼs Manual 9
Operating instructions

Operating instructions
Standard Operation - Standard Cooling
It cools the room by comfortable and clean wind.

1 Press
indoor.
button to turn on the

2 Press button to select

Cooling operation mode.

3 Adjust the desired temperature

by pressing buttons.
Press button to check the
Room temperature.
When setting the desired
temperature higher than room
temperature, only ventilation
wind is blow out instead of
cooling wind.

h Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)

Standard Operation - Heating Mode

It supplies warm wind to the indoor

1 Press
indoor.
button to turn on the

2 Press button to select

Heating mode.
(To check the indoor temperature,
press the room temperature button.)

3 Adjust the desired temperature

by pressing buttons.

When setting the desired

temperature lower than room
temperature, there is only
ventilation wind.

• Heating drive only operates at the cooling and heating model.

• Heating doesn't operate at cooling exclusive model.

10 Indoor Unit
 Operating instructions

ENGLISH
Standard Operation - Dehumidification Mode
It removes humidity while air-cooling weakly.

1 Press
indoor.
button to turn on the

2 Press button to select

Dehumidification mode.
The temperature setting can not be
adjusted during operation this mode.

3 Press the button to select

airflow rate feeble → weak →
medium → strong → automatic.
(The initial wind powerfulness of
humidity removal drive is 'weak'.)

• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
• The menu item of wind powerfulness might not be partially selected according to the product.

Auto Changeover Mode

Change temperature is the function to setup air-cooling and heating drive automatically changeable
according to the temperature at artificial intelligence drive mode.

1 Repeaticonpressing
flash.
button until

2 Press button to change.

❈ Converting temp value : 1~7

3 Press button to complete

and active the setting process.

4 Press button to exit or

system will automatically release
without any input after 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.

Ownerʼs Manual 11
Operating instructions

Standard Operation - Auto Operation Mode

1 Press
indoor.
button to turn on the

2 Press button to select

Artificial intelligence Mode.

3 You can adjust the

temperature as the
picture on the right
for cooling and
heating model.

4 For the case of

cooling exclusive,
as the picture on
the right, you can When cold
adjust the When cool
temperature from When appropriate
hot to cold, from When warm
"-2" to "2" based When hot
on "00".

During operating Auto Operation mode:

• We can use the FAN SPEED button
• We can change manually to other operation mode.

Standard Operation - Fan Mode

It blows the air as it is in the indoor, not the cold wind.

1 Press
indoor.
button to turn on the

2 Press
Mode.
button to select Fan

3 Every time pressing button, you

can select wind flow in order of
feeble → weak → medium → strong
→ automatic.
When running ventilation,
compressor of AHU doesn't work.

• Ventilation drive does not release cool wind but general fan
• Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
• The menu item of wind powerfulness might not be partially selected according to the product.
12 Indoor Unit
 Operating instructions

ENGLISH
Standard Operation - Temperature Setting/Room Temperature Check
Temperature Setting

1 We can simply adjust the desired

temperature.
• Press the buttons to adjust the
desired temperature.

: Increase 1˚C or 2˚F per one time

pressing
: Decrease 1˚C or 2˚F per one time
pressing

• Room temp: Indicate the current room

temperature.
• Set temp: Indicate the temperature that user
want to set.

h Depend on what kind of controller, the desired

temperature can be adjusted at 0.5˚C or 1˚F.

Cooling operation:
- The cooling mode doesn't work if
desired temperature is higher than room
temperature Please lower the desired
temperature.

Heating operation:
- The heating mode doesn't work if desired
temperature is lower than room
temperature Please increase the desired
temperature.

Room Temperature Check

1 Whenever press button, the room

temperature will be displayed within 5
seconds.
After 5 seconds, it turns to display the
desired temperature.
Because of location of remote controller,
the real room temperature and the this
displayed value can be different

• For air-cooling drive, from 18°C to 30°C, and for heating drive, from 16°C to 30°C, you can select
desired temperature.
• 5°C is proper for the difference between room and outside temperature.

Ownerʼs Manual 13
Operating instructions

Function setting - Child Lock

It is the function to use preventing children or others from careless using.

1 Press
the
button repeatedly until
is flashing.

2 Ifusing
moving to 'setup' icon area by
button, 'setup' icon
blinks, and child lock function is
setup if pressing button at
that time.

3 When cancelling lock function, if moving

to 'cancel' icon by pressing button
and then, pressing button, child lock
function is cancelled.

4 Press button to exit.

❈ After setup, it automatically gets out of setup
mode if there is no button input for 25 seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.

Function Setting - Change Temp

Change temperature is the function to setup air-cooling and heating drive automatically changeable
according to the temperature at artificial intelligence drive mode.

1 Repeaticonpressing
flash.
button until

2 Press button to change.

❈ Converting temp value : 1~7

3 Press button to complete

and active the setting process.

4 Press button to exit or system

will automatically release without any
input after 25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.

14 Indoor Unit
 Operating instructions

ENGLISH
Function setting - Changing Current Time

1 Please press function setup

button. If pressing function setup
button repeatedly, it moves to
time setup menu. ‘Time setup’
icon is indicated at that time and date
blinks at current time indication area.
Ex) Changing Current Time as
'Monday / AM 10:20'.

2 Press
day.
key to adjust the current

3 Press key to move to AM/ PM setting

mode (the 'AM/ PM segment will flash).

4 Setting
pressing
AM/ PM value by
button.

5 Press button to move to 'Hour'

setting mode. (the 'Hour' segment will
flash)

6 Setting
button.
Hour value by pressing

Ownerʼs Manual 15
Operating instructions

7 Press button to move to 'Minute'

setting mode. (the 'Minute' segment will
flash)

8 Setting
button.
Minute value by pressing

9 Press button to finish.

In the process, press

10 button to release and exit
from setting mode.
(In case of exit with
incomplete information, it will return to
the previous setting)
❈ When exiting without pressing set
button, the manipulated value is not
reflected.

16 Indoor Unit
 Operating instructions

ENGLISH
Programming - Simple Reservation
You can set the reservation conveniently in the units of 1 hour from 1 hour to 7 hours.

1 Press button to enter the

Programming mode.
(the segment flashing)

Ex) Setting Simple Reservation

time as '3'.

2 Press
time.
button to adjust reservation

3 Press button to finish setting.

4 Press button to exit.

❈ After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.

h When simple reservation setup, product automatically runs or stops after the time that is set.

Ownerʼs Manual 17
Operating instructions

Programming : Weekly Reservation

You can set the daily reservation in weekly unit.
Weekly reservation keeps operating until before you cancel it once you setup

1 Please move to reservation setup mode by pressing reservation button.

❈ You can setup two weekly reservations for one day, and up to fourteen
reservations for a week.
For example, to setup (Tuesday morning 11:30 turned on ~ afternoon 12:30
turned off), you setup in order below.

2 Please move to 'weekly' by

repeatedly pressing reservation
button. 'Weekly' blinks at this time.

3 Please select weekly reservation or

weekly reservation ¡ by using
button.
❈ You can setup two reservations,
weekly reservation 1 and weekly
reservation 2, for a day.

4 Please
using
move to 'date' setup part by
button. If 'date'
indication blinks, please setup date.
You can setup date from Monday to
Sunday.

5 Please move to 'AM/PM' setup part

of turning on by using button.

6 Please move to 'hour' setup part of

turning on by using button.
- It is the part to setup the time at
which air-conditioner is turned on.

7 Please change time by using

- You can setup hour 0~12.
button.

8 Please move to 'minute' setup part of turning on by using button.

9 If 'minute' indication blinks, please setup 'minute' by using button

18 Indoor Unit
 Operating instructions

ENGLISH
10 Please move to 'AM/PM' setup part
of turning off by using button.
- AM/PM setup is identical with
turning on time setup.

Please move to 'hour' setup part

11 of turning off by using Right
button.
- It is the part to reserve the time
at which air-conditioner is
turned off.
- If 'hour' indication blinks, please
setup 'hour'.
❈ Please setup 'hour' and 'minute'
identically with the method to
setup turning on time.

12 IfWeekly
finishing weekly reservation setup, please press setup/cancellation button.
reservation setup for the day that you set is finished.

13 Ifyou'd
you setup with the method identical with above by selecting the day that
like to setup, it operates weekly reservation.
If you setup both turning on reservation time and turning off reservation time
identically, it doesn't operate reservation drive.
Weekly reservation explanation

Reservation
number
Turning on time Turning off time

Under bar: the indication that there is weekly reservation for

corresponding day

h Indoor unit is turned on to desired temperature if it is configured using up/down button during preset of weekly operation time.
(Temperature selection range : 18℃~30℃)
- When desired temperature is not set, it is turned on automatically with desired temperature of previous operation.

Ownerʼs Manual 19
Operating instructions

Programming - Sleep Reservation

Sleep reservation is the function of air-conditioner to run and stop after certain period of time at sleep
mode before sleep. When connected to a ventilation product and set the sleep reservation, when it
goes to the sleep mode, after the set time has elapsed.

1 Press button to enter the

Programming mode.
Ex) Setting Sleep Reservation
time as '3'.

2 Repeat pressing button to enter the

SLEEP reservation setting mode.
( segment flashing)

3 Press
time.
button to adjust reservation

The SLEEP reservation time is from 1 to

7 hours.

4 Press button to finish setting.

Whenever reservation is done.

5 Press button to exit.

❈ After setup, it automatically gets out of
setup mode if there is no button input
for 60 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
- If reservation is setup, 'sleep'
indication shows up at the lower part
of LCD screen.

6 Ifair-conditioner
finishing sleep reservation setup,
product operates sleep
drive and stops after the time that is set.

CAUTION
Please reserve proper time at sleeping. (Too much air-cooling is not good for your health.)
• Because it automatically adjusts desired temperature for comfortable air-cooling at sleep drive,
there could be difference between remote controller's desired temperature and air-conditioner
body's desired temperature.
• Sleep reservation operates as off reservation for the product whose temperature adjustment isn't
controlled by unit of 0.5°C.

20 Indoor Unit
 Operating instructions

ENGLISH
Programming : Holiday Reservation
It automatically stops at reserved day that you set.

1 Please press button.

It enters into reservation
setup mode.

2 Please move to 'holiday' by repeatedly

pressing button.

3 Please move to 'date' that

you want to setup holiday
by using button.

4 Please
using
appoint or cancel holiday by

or button.
For example, when you setup
Monday/Friday to holiday
- 'Monday', 'Friday' letter disappears.

5 Please press
holiday setup.
button if finishing

❈ If it comes to appointed holiday,

air-conditioner automatically stops.
Once you setup holiday appointment,
until before you cancel holiday setup,
air-conditioner automatically stops
within one hour even though you run
air-conditioner.

Ownerʼs Manual 21
Maintenance and Service

Maintenance and Service

CAUTION: Before performing any maintenance, turn off the main power to
the system.

Grille, Case, and Remote Controller

o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.

Air filters
NOTE Power supply must be disconnected before Air outlet vent
cleaning the indoor unit.
1. Remove the Air filters.
Air Filters n Take hold of the tab and pull slightly forward
to remove the filter.
The air filters behind the front grille should be checked and
cleaned once every 2 weeks or more often if neccessary.
CAUTION: When the air filter is
to be removed, do not touch the
metal parts of the indoor unit.
It may cause an injury.

2. Clean dirt from the air filter using a vacuum

Air outlet vent cleaner or washing with water.
n If dirt is conspicuous, wash with a neutral
detergent in lukewarm water.
n If hot water (40°C or more) is used, it may
n Never use any of the followings: be deformed.
• Water hotter than 40°C.
Could cause deformation 3. After washing with water, dry well in
and or discoloration. the shade.
• Volatile substances. n Do not expose the air filter to direct
Could damage the SI
N NER
SCO
sunlight or heat from a fire when drying it.
U R IN
surfaces of the air B en e
z en
C LB
A R GE

conditioner. 4. Install the air filter.

22 Indoor Unit
 Maintenance and Service

ENGLISH
When the air conditioner is not going to be used for a long time.
When it is not going to be used for
When the air conditioner is to be used again.
a long time.

Operate the air conditioner at the Clean the air filter and install it in the
following settings for 2 to 3 hours. indoor unit.
• Type of operation: Fan operation mode.
• This will dry out the internal mechanisms.

Turn off the breaker.

Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
CAUTION
Turn off the breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Check that the ground wire is
connected correctly. It may be connect
Helpful information to the indoor unit side.

The air filters and your electiric bill.

If the air filters become clogged with dust, the
cooling capacity will drop, and 6% of the electricity
used to operate the air conditioner will be wasted.

Operation Tips

Do not overcool the room. Keep blinds or curtains Keep the room temperature
closed. uniform.

This is not good for the health Do not let direct sunshine Adjust the vertical and
and wastes electricity. enter the room when the air horizontal airflow direction to
conditioner is in operation. ensure a uniform temperature
in the room.

Make sure that the doors Clean the air filter regularly. Ventilate the room
and windows are shut tight. occasionally.

Avoid opening doors and Blockages in the air filter Since windows are kept
windows as much as possible reduce the airflow and lower closed, it is a good idea to
to keep the cool air in the cooling and dehumidifying open them and ventilate the
room. effects. Clean at least once room now and then.
every two weeks.

Ownerʼs Manual 23
Maintenance and Service

Before you call for service...

Troubleshooting Tips! Save time and money!
? Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.

The air conditioner The room has a It seems that Air conditioner does
does not operate. peculiar odor. condensation is not operate for about
leaking from the air 3 minutes when
conditioner. restart.

• Have you made a • Check that this is not • Condensation occurs • This is the protector
mistake in timer a damp smell exuded when the airflow from of the mechanism.
operation? by the walls, carpet, the air conditioner • Wait about three
• Has the fuse blown furniture or cloth cools the warm room minutes and
or has the circuit items in the room. air. operation will begin.
breaker been
tripped?

Does not cool or heat The air conditioner Crack sound is Remote control
effectively. operation is noisy. heard. display is faint, or no
display at all.

• Is the air filter dirty? • For a noise that • This sound is generated • Are the batteries
See air filter cleaning sounds like water by the expansion/ depleted?
instructions. flowing. constriction of the front • Are the batteries
• The room may have -This is the sound of panel, etc. due to inserted in the
been very hot when freon flowing inside changes of opposite (+) and (-)
the room air the air conditioner temperature. directions? 
conditioner was first unit.
turned on. Allow time • For a noise that Filter sign lamp is
for it to cool down. sounds like the ON.
• Has the temperature compressed air
been set incorrectly? releasing into
• Are the indoor unit's atmosphere.
air inlet or outlet vents -This is the sound of • Cleaning the filter,
obstructed? the dehumidifying press the Timer button
water being and ◀ button of wired
processed inside the remote controller at
air conditioning unit. the same time for 3
sec.

NOTE
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
The indoor side is not water resistant and should not be exposed to
excess water.

24 Indoor Unit