Mobil Delvac Synthetic Gear Oil 75W-90, 80W-140

Supreme Performance Commercial Gear Lubricants

Product Description

Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 are synthetic drivetrain lubricants engineered to meet the most
demanding extended drain and warranty requirements. These products are designed for use in heavy-duty drivetrains that
require gear lubricants with relatively high viscosity and excellent load-carrying capability and where extreme pressures and
shock loading are expected. Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 incorporate the latest technology in
synthetic basestocks and advanced additives providing significant advantages over mineral gear oils.

The state-of-the-art technology in Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 delivers unsurpassed performance for
low and high temperature application, protection against thermal degradation and oxidation, reduced wear and corrosion,
improved shear stability, extended service capability, and excellent fuel economy. These products meet or exceed the
requirements of API service MT-1/GL-5 EP gear oil service classification and are recommended by ExxonMobil for use in
applications requiring the MIL-PRF-2105E specification.

The outstanding performance of this product is confirmed by its approval for final drives covered by Eaton Roadranger (E500)
and ArvinMeritor Extended Warranties of 750,000 miles, with extended oil drains of 500,000 miles. They are also approved by
Mack against GO-J Plus (75W-90) and GO-J (80W-140) extended service classifications.

Features and Benefits

Today’s technology has vastly improved the performance capabilities of heavy-duty on and off-highway equipment load, torque,
speed, and control through innovative drivetrain designs. These designs have changed and increased the requirements of
lubricants to deliver this higher level of performance, increase productivity, and reduce operating costs. For heavy-duty final
drives, friction control, wear protection, thermal stability, shear stability, rust and corrosion prevention, and seal protection are
features that must be optimally balanced to provide extended gear and seal life, smooth operation, improved fuel economy and
high load high torque capability over a wide range of applications. The key benefits of Mobil Delvac Synthetic Gear Oil 75W-90
and 80W-140 include:

Features Advantages and Potential Benefits

Exceptional thermal stability and resistance to high temperature Extended gear and bearing life due to minimal deposits
oxidation Longer seal life
Outstanding protection against low speed/high torque wear Increased load-carrying capability.
and high speed scoring Reduced maintenance costs and longer equipment life
Retains viscosity and film strength under severe operating
Exceptional shear stability
conditions to prevent wear
Excellent rust, staining, and corrosion protection of copper and
Reduced wear and longer component life
its alloys
Enhanced friction reduction properties Improved fuel economy and reduced operating costs
Outstanding low temperature fluidity versus mineral oils Reduced wear and ease of start-up
Good resistance to foaming Maintains film strength for reliable lubrication
Compatible with typical automotive seals and gaskets Minimum leakage and reduced contamination

Applications

Recommended by ExxonMobil for use in:

Heavy-duty manual transmissions, axles and final drives requiring API GL-5 and MT-1 performance
On-highway light and heavy-duty trucks, busses and vans
Off-highway industries including: construction, mining, quarrying, and agriculture
Other heavy-duty industrial gear drives including hypoid and worm gears operating under conditions where high
speed/shock load, high speed/low torque, and/or low speed/high torque conditions prevail
 Differentials, final drives, transfer cases and other gear applications where lubricants meeting MIL-PRF-2105E, API
Service GL-5 , EP gear lubricants are recommended
Equipment such as winch reduction gears and crawler vehicle propulsion gear drives that are exposed to severe low
temperatures
Use as a companion with Mobil Delvac Synthetic Transmission Fluid 50 in transmissions for maximum drive train life,
efficiency and fuel economy improvement
Applications where extended service intervals and warranties are required
Not recommended for applications requiring API GL-4 Level performance
Not intended for automatic, manual or semiautomatic transmissions for which engine oil or automatic transmission fluids
are recommended

Specifications and Approvals

Mobil Delvac Synthetic Gear Oil meets or exceeds the

requirements of the following industry and builder 75W-90 80W-140
specifications:
API GL-5/MT-1 X X
SAE J2360 X X
Scania STO 1:0 X X
ZF TE-ML 07A/08 X

Mobil Delvac Synthetic Gear Oil has the following builder

75W-90 80W-140
approvals:
DANA SHAES 429 X X
DANA SHAES 256 Rev C X
Mack GO-J PLUS X
Mack GO-J X
ArvinMeritor O-76N X X
MB-Approval 235.8 X
International TMS-6816 X X
ZF TE-ML 05B/12B/16F/19C/21B X X
ZF TE-ML 17B X
MAN 342 Typ M2 X
Voith Turbo 3.325-340 / 3.325-342 X
Flender BA 7302 Table R1 X

Mobil Delvac Synthetic Gear Oil is recommended by

75W-90 80W-140
ExxonMobil for use in applications requiring:
DANA SHAES 256 Rev. A X

Mobil Delvac Synthetic Gear Oil is of quality level, but not

75W-90 80W-140
approved:
MIL-PRF 2105E X X

Typical Properties

Mobil Delvac Synthetic Gear Oil 75W-90 80W-140

SAE Grade 75W-90 80W-140
Viscosity, ASTM D 445
Mobil Delvac Synthetic Gear Oil 75W-90 80W-140
cSt @ 40ºC 120 310
cSt @ 100ºC 15.9 31.2
Viscosity Index, ASTM D 2270 140 139
Pour Point, ºC, ASTM D 97 -48 -36
Flash Point, ºC, ASTM D 92 205 210
Density @ 15ºC kg/l, ASTM D 4052 0.859 0.870

Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended
application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available
upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its
intended use. If disposing of used product, take care to protect the environment.

The Mobil logotype, the Pegasus design and Delvac are trademarks of ExxonMobil Corporation, or one of its subsidiaries.

ExxonMobil Asia Pacific Ltd

1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633

+65 6885 8000

http://www.exxonmobil.com

Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification.
Variations that do not affect product performance are to be expected during normal manufacture and at different blending
locations. The information contained herein is subject to change without notice. All products may not be available locally. For
more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil.
Nothing in this document is intended to override or supersede the corporate separateness of local entities. Responsibility for
local action and accountability remains with the local ExxonMobil-affiliate entities.

Copyright © 2001-2012 Exxon Mobil Corporation. All rights reserved..