DAILY TOOL PUSHER
CHECKLIST
RIG No.: OPERATOR: l
AREA: LOCATION / WELL #:
DATE: DRILLER:
dd-mmm-yyyy
1) DRILL FLOOR: indicate which are open or closed?
a) Gray valve accessible / functional? f) All nuts & bolts in place on BOP and Manifold?
b) Stabbing valve & handle accessible / g) Area is adequately illuminated at night?
functional? h) Coflex inlet line secured at both ends?
c) X/O subs available for a) & b) and accessible.
i) Are pressure gauges functioning correctly?
d) Mud monitoring devices working properly?
j)
e) Accurate mechanical hole fill measuring device
visible from Driller’s console?
f) Check that the Standpipe Manifold is lined up 4) ACCUMULATOR:
correctly. a) Have hydraulic valves been function tested?
g) Reduced pump rates and pressures recorded b) Hydraulic fluid at the correct level?
daily? c) Ram sizes posted on the Accumulator Remote
h) Has the Upper IBOP been tested? Panels?
i) Check Pipe figures and confirm Pipe count. d) Correct pressure readings posted on the
j) Is the gap on the Deadman Sensor 19mm? Accumulator Remote Panels?
e) Accumulator Air and Electric pumps have been
k) Has the Dead Man drilling line Anchor been function tested and are lined up correctly?
checked for slippage? f) Have you checked the pressures on the unit?
l) Crow-O-matic checked daily. Height set above
the floor : g) BOP functions / controls clearly marked?
m) Safety Valves function tested and valve keys in h) Manifold can be operated from remote stations?
place? i) Correct pressure showing on gauges?
n) Is mud logger’s instrumentation functioning?
o) Are the telephones fuctioning properly?
5) GENERAL:
p) All permits are returned when finished? a) Mast lights in working order?
q) Rig floor & Derrick clean & in order? b) Climbing Assist devices and Fall Arrest
equipment meet on Standards?
2) BOP’s: c) Crown, Blocks, Hook & TDS serviced daily?
a) BOP secured with chains/slings to d) All mud pumps lined up on hole for drilling & not
substructure? closed in?
b) All bolts tight & kill/choke valves lined up e) What are the pop off valves set at?
correctly? f) Smoking in designated areas only.
c) Cellar clean & tidy?
g) Drillers hold valid Well Control certificates.
d) Substructure clean & accessible?
h) Trip sheet filled ready for next trip?
e) BOP stack clean & easy to access?
i) Trip sheet completed for each trip?
3) CHOKE MANIFOLD: j) Daily Toolbox meetings being held and
c) Valve upstream of choke closed? recorded?
k) Weekly BOP drill recorded in tour book?
e) All valves and handles operate freely and
COMMENTS
Page 1 of 2X
DAILY TOOL PUSHER
CHECKLIST
RIG No.: OPERATOR: l
AREA: LOCATION / WELL #:
DATE: DRILLER:
dd-mmm-yyyy
SIGN OFF
C-man: TP:
SIGNATURE: SIGNATURE:
Original – Rig Files
Page 2 of 2X
