0% found this document useful (0 votes)
190 views2 pages

Solar Dealer Catalogue-NXi NEW

Luminous NXi solar grid tie systems are high efficiency photovoltaic power systems that can feed solar power directly into the utility grid. They quickly disconnect from the grid if it goes down for safety. Systems are available for single phase or three phase installation from 1.5 kW to 30 kW, with dual/quad MPPT charge controllers to utilize partial shade conditions. Key features include transformerless design, wide operating voltage range, IP65 weatherproof enclosures, and WiFi monitoring capabilities. Systems meet international safety and grid compliance standards.

Uploaded by

Alex Bigs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
190 views2 pages

Solar Dealer Catalogue-NXi NEW

Luminous NXi solar grid tie systems are high efficiency photovoltaic power systems that can feed solar power directly into the utility grid. They quickly disconnect from the grid if it goes down for safety. Systems are available for single phase or three phase installation from 1.5 kW to 30 kW, with dual/quad MPPT charge controllers to utilize partial shade conditions. Key features include transformerless design, wide operating voltage range, IP65 weatherproof enclosures, and WiFi monitoring capabilities. Systems meet international safety and grid compliance standards.

Uploaded by

Alex Bigs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Solar

Grid Tie
System
Luminous NXi Grid Tie systems are high
efficiency power systems that can feed
power from solar panels directly to grid.
They are designed to quickly disconnect
from the grid if the utility grid goes down
(anti-islanding).

Single Phase (kW) 1.5/3/4/5


Range available:
Three Phase (kW) 6/10/15/20/25/30

Features Benefits

Transformerless design High efficiency >97%

Dual/Quad MPPT charge controllers Complete utilization of PV arrays even in partial shading

Wide operating voltage Extends the day utilization for harnessing maximum power

IP 65 enclosure Completely dust and water proof so can be installed outside

Wifi communication For efficient remote monitoring

Compliance to IEC standards Safe, reliable and approved for Govt. subsidies

Anti-Islanding Ensures safety of line workers


Disconnects from grid if grid goes down
Technical Specification - Luminous NXi Solar Grid Tie Systems (Single/Three Phase )
Model NXi 115 NXi 130 NXi 150 NXi 306 NXi 310 Nxi 315 NXi 320 NXi 325 NXi 330
Input (DC)
Max. DC power [kW] 1.8 3.5 5.8 6.6 11 16.5 22 27.5 33
Max. DC voltage [V] 450 600 1000
Rated voltage [V] 60 120 600
Operating MPPT voltage range (Volts) 50-400 100-500 200-800
Start voltage [V] 60 120 330 350
Max input current per MPPT (Amps) 10 10+10 15+15 15+15 18 + 18 18 + 18 18 x3 18x4 18x4
Number of MPPT 1 2 2 2 2 4 4 4
Number of DC Connection Sets per MPPT 1 2 4 4 8 8 8
Output (AC)
Rated AC Power [kW] 1.5 3 5 6 10 15 20 25 30
Max. Transient Response [kW] 1650 3300 5000 6.5 10.8 16.2 21.6 27 32.5
Max. AC Current [A] 9.2 15.7 23.8 10 16.7 25 33.2 41.7 47.8
Nominal AC voltage/ range 180-270 313-470 304-460
Grid frequency/ range 50Hz (47-52)
Power factor [cos φ] >0.8 leading... 0.8 lagging
Total harmonic distortion [THDi] <3%
Feed-in phase / connection phase Single Phase Three Phase
Efficiency
Max. efficiency 96.70 97.50 97.80 98.20% 98.20% 98.30% 98.30% 98.40% 98.50%
MPPT efficiency 99.90%
Protection
Internal over-voltage , Ground fault monitoring, Grid monitoring, AC short circuit current,
Thermal, Anti-islanding protection, Insulation monitoring, Residual Current detection,
Surge protection, Over current, , DC Reverse Polarity Protection, Short Circuit Protection,
Inbuilt Protections O/P Over Current Protection, O/P Over Voltage Protection, Grid Monitoring,
Islanding Protection, Thermal Protection
Interface
DC connection MC4 connectors
Display LCD 2 x 20Z 7" Color Display
Datalogger & communication RS485, WIFI/GPRS (optional)
General Data
Topology Transformerless
Consumption at night [W] < 1W
Operating temperature range -25°C to 60°C/-13°F to 140°F
Cooling method Natural Convection
Ambient humidity 0-95%
Altitude 4000m
Noise [dBA] < 30 dBA
Designed lifetime > 20yrs
Enclosure type NEMA 4X
Dimensions (H*W*D) [mm] 339x565x172 430 x 613 x 269 530 x 700 x 356
Net weight [kg] 5.6 13.8 15.5 29 29 30 57.2 58.2 58.2
Standards
Safety / EMC EN1000-6-1:2007;EN1000-6-3:2007
IEC 62109-1,62109-2:AS3100
Utility Monitoring Islanding protection, VA C FA C in accordance with UL 1741,
En50438, G59/3, AS4777, VDE 0126-1-1, VDE 4105, CEI 0-21, CQC

You might also like