대 외 비

보존기한 3 년

SB350 HDMI Model

S22B350H/S23B350H/S24B350HL/
S24B350H/S27B350H
Training Manual

TSDR R&D Group

MONITOR Lab
Contents

 Product Overview
 OSD Adjustment
 Circuit Description
 Assembly and Disassembly
 Troubleshooting
 How to Execute Code
 Etc.
1. Product Overview (Specifications of Options)
Accessories
1. Product Overview (Specifications of Options)
Accessories(Option)
 1. Product Overview (Product Features)

*. Feature

-. Panel : 250cd/m2(21.5/23/24 inch), 300cd/m2(27 inch),

2ms, DCR MEGA, 170/160(CR>10)
-. DPMS : Typical 0.3W(21.5/23/24 inch), Typical 0.5W(27 inch)
-. HDMI with HDCP
-. Windows Vista/Windows 7 authentication
-. Picture：a screen size desire
-. Off-Timer function for reducing standby power usages
-. Supported Bright/Eco saving/ Angle/Image Size
1. Product Overview (Product Features)
-. Quick Display

1. Using Auto Source skill is just enactment auto.

2. Action qualification

2.1. The instance of Change the normal state (Menu state) to abnormal

2.2. When the normal state source turn to abnormal state (DPMS or Cable
separate), the OSD of 2nd Source is set out, searching the signal .

2.3. In the2.1.1 searching, the analog signal must be searching, it is not mind with
the analog cable insert or not. The Digital signal must be searching
that the signal cable is be inserted.

2.4. If the 2nd Source is normal signal, displaying the 2nd Source.

2.5. If the 2nd Source do not have any signal, go back to the 1st Source and repeat
the searching.

2.6. In the work of Searching, the signal is normal, the menu will display

2.7. If do not have any signal, when searching signal after, alone with the 1st Source
condition carried out (Check Signal Cable or DPMS).
1. Product Overview (Product Features)
-. Shop Mode

1. This function is dividing the motionless image and dynamic image in the shop for supplying best image
quality setting function, and displaying the best image quality to consumers. In addition, it can prevent
the reducing of image quality when consumers tryout the monitor in the shop.

1.1. Using the function : In the state of display Direct Brightness OSD or Direct Volume OSD,
press the Menu key about 5 seconds and after LED Toggle of one times, then shop mode is on.
1.2. Quit the function : Same to enter the function.(Monitor also quit shop mode when reset)

-. e-POP

1. When enter to Shop mode, e-pop OSD will display in the top left of the screen.
The different project correspond the different e-POP pattern.

2. e-POP display 30 seconds, and then disappear 10 seconds.

3. Press Menu Key, display Main OSD, and e-POP OSD disappear.
 1. Product Overview (Product Specification)
Series SB350 HDMI
Model S22B350H S23B350H S24B350HL S24B350H S27B350H
Screen Size 21.5” 23” 23.6” 24” 27”
Resolution 1920*1080@60Hz 1920*1080@60Hz 1920*1080@60Hz 1920*1080@60Hz 1920*1080@60Hz
2 2 2 2 2
Brightness 250cd/m 250cd/m 250cd/m 250cd/m 300cd/m
Contrast Ratio 1000:1 1000:1 1000:1 1000:1 1000:1
Dynamic Contrast MEGA(Typ.) MEGA(Typ.) MEGA(Typ.) MEGA(Typ.) MEGA(Typ.)
Video
Response Time 2ms 2ms 2ms 2ms 2ms
Viewing Angle (H/V) 170o/160o 170o/160o 170o/160o 170o/160o 170o/160o
Supported Resolution VGA ~ WSXGA+ VGA ~ WSXGA+ VGA ~ WSXGA+ VGA ~ WSXGA+ VGA ~ WSXGA+
Horizontal Frequency 30~81kHz 30~81kHz 30~81kHz 30~81kHz 30~81kHz
Vertical Frequency 56~75Hz 56~75Hz 56~75Hz 56~75Hz 56~75Hz
Analog/HDMI
Input Analog/HDMI with Analog/HDMI with Analog/HDMI with Analog/HDMI with
Interface with
& HDCP HDCP HDCP HDCP
HDCP
Output
Sync Type Sep./Comp./SOG Sep./Comp./SOG Sep./Comp./SOG Sep./Comp./SOG Sep./Comp./SOG
Power Consumption Typical 30W Typical 30W Typical 30W Typical 30W Typical 40W
(ON) Max 33W Max 33W Max 33W Max 33W Max 44W
Power
Power Consumption Typical 0.3 watts Typical 0.3 watts Typical 0.3 watts Typical 0.3 watts Typical 0.5 watts
(DPMS) Max 0.45 watts Max 0.45 watts Max 0.45 watts Max 0.45 watts Max 0.6 watts
1. Product Overview (Connecting External Devices)

Power
2-2
2-1

Connect the power cord for your monitor to the power port on the back of the monitor.
1.
Plug the power cord for the monitor into a nearby outlet.

Using the D-sub (Analog) connector on the video card.

2-1.
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

Using HDMI connector on the video card.

2-2.
Connect the HDMI Cable to the HDMI Port on the back of your Monitor.
1. Product Overview (Supported Display Modes)
Horizontal Vertical Pixel Clock Sync Polarity
Display Mode
Frequency (kHz) Frequency (Hz) (MHz) (H/V)
IBM 720 x 400 31.469 70.087 28.322 -/+
MAC 640 x 480 35.000 66.667 30.240 -/-
MAC 832 x 624 49.726 74.551 57.284 -/-
MAC 1152 x 870 68.681 75.062 100.000 -/-
VESA 640 x 480 31.469 59.940 25.175 -/-
VESA 640 x 480 37.861 72.809 31.500 -/-
VESA 640 x 480 37.500 75.000 31.500 -/-
VESA 800 x 600 35.156 56.250 36.000 +/+
VESA 800 x 600 37.879 60.317 40.000 +/+
VESA 800 x 600 48.077 72.188 50.000 +/+
VESA 800 x 600 46.875 75.000 49.500 +/+
VESA 1024 x 768 48.363 60.004 65.000 -/-
VESA 1024 x 768 56.476 70.069 75.000 -/-
VESA 1024 x 768 60.023 75.029 78.750 +/+
VESA 1152 x 864 67.500 75.000 108.000 +/+
VESA 1280 x 720 45.000 60.000 74.250 +/+
VESA 1280 x 800 49.702 59.810 83.500 -/+
VESA 1280 x 1024 63.981 60.020 108.000 +/+
VESA 1280 x 1024 79.976 75.025 135.000 +/+
VESA 1440 x 900 55.935 59.887 106.500 -/+
VESA 1600 x 900 60.000 60.000 108.000 +/+
VESA 1680 x 1050 65.290 59.954 146.250 -/+
VESA 1920 x 1080 67.500 60.000 148.500 +/+
1. Product Overview (OSD Functions)

•Press one of the buttons on the monitor. OSD Guide will appear on the screen.

•If you press a button on the front of the monitor, an OSD Guide will display showing the
function of the button before the menu for the pressed button appears.

•To go to the menu, press the button on the front of the monitor again.

•OSD Guide may vary according to functions and models. Please refer to actual product.
1. Product Overview (OSD Functions)
ICON DESCRIPTION

Press this button to view the On Screen Display (OSD).

This button is also used to exit the OSD or to return to a higher-level OSD menu

* OSD Adjustment Lock

This function locks the OSD in order to maintain the current settings or to prevent the
MENU settings from being changed by another person

On: If you press and hold the MENU button down for 10 seconds, the OSD Adjustment
Lock function is activated.

Off: If you press and hold the MENU button down for 10 seconds again, the OSD
Adjustment Lock function is disabled.

Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
and contrast and can set up the adjustment function assigned to the [ ].
Users can set the <Customized Key> to one of the following functions. If the user presses
the Customized Key [ ] after setting it, the configured function will be performed

•< Angle> - < Bright> - <Eco Saving> - <Image Size>

You can set the function of the Customized Key by selecting <SETUP&RESET > ->
<Customized Key> in the OSD.
1. Product Overview (OSD Functions)
ICON DESCRIPTION

Use these buttons to navigate the menu or to adjust a value in the OSD.

Use this button to control the brightness of the screen.

Use this button to select a function.

If you press the [ ] button when there is no OSD, the input signal (Analog/DVI or
Analog/ HDMI) is switched. When the input signal is switched by pressing [ ]
button or the product is turned on, a message displaying the selected input signal
appears at the top left of the screen.

This function is not available for products with an Analog interface only.
Press [AUTO] button to adjust the screen settings automatically

AUTO This function is only available in Analog mode.

If the resolution settings are changed in the Display Properties, the AUTO adjustment
function is performed.
1. Product Overview (OSD Functions)
ICON DESCRIPTION

Press this button to turn the product on or off

• The buttons on the right of the product are touch-type buttons.

• Touch the buttons lightly with your finger.

Power LED

This LED is turned on when the product works normally.

For more information on the power-saving function, refer to the power saving
function in More Information. When not using the product for a long time,
unplugging the power cord is recommended to minimize power consumption.
2. OSD Adjustment (Picture)

Menu Description

Controls the screen brightness.

Brightness
• This menu is unavailable when < Bright> is set to <Dynamic Contrast> mode.
• This menu is unavailable when <Eco Saving> is set.
Controls the contrast of the pictures displayed on the screen

• This menu is unavailable when < Bright> is set to <Dynamic Contrast> or

Contrast
<Cinema> mode.
• This menu is unavailable when < Color> is set to <Full> mode or
<Intelligent> mode.
2. OSD Adjustment (Picture)
Menu Description

Controls the clarity of details of pictures displayed on the screen

• This menu is unavailable when < Bright> is set to <Dynamic Contrast> or

Sharpness
<Cinema> mode.
• This menu is unavailable when < Color> is set to <Full> mode or
<Intelligent> mode.
Provides preset picture settings optimized for various user environments such as editing a
document, surfing the Internet, playing games, or movies and so on.
• <Custom>
If the preset picture modes are not sufficient, users can configure the <brightness> and
<Contrast> directly using this mode.
• <Standard>
This mode provides the picture setting appropriate for editing a document and surfing
the Internet (text + picture).
Bright • <Game>
This mode provides the picture setting appropriate for playing games that include lots
of graphics and that require a fast screen refresh rate.
• <Cinema>
This mode provides brightness and sharpness settings similar to those of a TV for the
best entertainment environment (movie, DVD, etc.).
• <Dynamic Contrast>
Controls the picture contrast automatically so that bright and dark pictures are balanced
overall.
2. OSD Adjustment (Picture)
Menu Description

When the external input is connected through HDMI and <PC/AV Mode> is set to <AV>,
< Bright> has four automatic picture settings (<Dynamic>, <Standard>, <Movie>
and <Custom>) that are preset at the factory. You can activate either Dynamic, Standard,
Movie or Custom. You can select Custom which automatically recalls your personalized
picture settings.

• <Dynamic>
Select this mode to view a sharper image than in Standard mode.
Bright • <Standard>
Select this mode when the surroundings are bright. This also provides a sharp image.
• <Movie>
Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
• <Custom>
Select this mode when you want to adjust the image according to your preferences.

This menu is unavailable when < Angle> or <Eco Saving> is set.

2. OSD Adjustment (Picture)
Menu Description

This feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by
setting the appropriate mode for each position you can obtain a similar picture quality as
viewing the screen directly from the front.

Set to <Off> when viewing directly in front of the screen.

• <Off> - Select when viewing from the front position.

• <Lean Back Mode1> - Select when viewing from a slightly lower position.
• <Lean Back Mode2> - Select when viewing from the lower position.
• <Standing Mode> -Select when viewing from the upper position.
• <Side Mode> - Select when viewing from the left or right position.
• <Group View> - Select when two or more persons view among , , position at the
Angle
same time.
• <Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by
default. Users can set suitable picture quality as needed.

• This menu is unavailable when < Bright> is set to <Dynamic Contrast> or

<Cinema> mode.
• This menu is unavailable when < Color> is set.
2. OSD Adjustment (Picture)
Menu Description

Removes vertical noise lines (line pattern) from the screen.

The location of the screen may be changed after the adjustment. In this case, move the
screen so that the screen is displayed at the center of the display panel using the <H-
Coarse
Position> menu.

This function is only available in Analog mode.

Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse>
Fine and then use the <Fine> function again.

This function is only available in Analog mode.

Accelerates the response time of the panel faster than the original response time so that
moving pictures appear sharper and more natural.

• <Normal>
• <Faster>
Response Time • <Fastest>

• It is recommended setting the <Normal> or <Faster> when not viewing a movie.

• Monitor functions may vary according to models. Please refer to actual product.
• User can choose the optimal mode from <Normal> / <Faster> /
<Fastest> ,according to the different input video signal.
2. OSD Adjustment (Picture)
Menu Description

When watching with a DVD or set-top box connecting to the product via HDMI, image
quality deterioration (black level, lower-quality contrast, lighter color tone, etc.) may occur
depending on the connected external device.
HDMI Black
• <Normal>
Level
• <Low>

This function is active only when the external device is connected via <HDMI>. The
<HDMI Black Level> function may not be compatible with all external devices.
2. OSD Adjustment (Color)

Menu Description

Expresses natural colors more clearly without changing the picture quality using
proprietary digital picture quality improvement technology developed by Samsung
Electronics.

• <Off> - Turns the < Color> function off.

• <Demo> - You can compare the pictures processed by < Color> with the original
Color
pictures.
• <Full> - Provides a clearer picture including areas corresponding to skin color.
• <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin
color.

This menu is unavailable when < Angle> is set.

2. OSD Adjustment (Color)
Menu Description

You can adjust the red color value of pictures according to your preference.
Red
This menu is unavailable when < Color> is set to <Full> mode or <Intelligent>
mode.
You can adjust the green color value of pictures according to your preference.
Green
This menu is unavailable when < Color> is set to <Full> mode or <Intelligent>
mode.
You can adjust the blue color value of pictures according to your preference.
Blue
This menu is unavailable when < Color> is set to <Full> mode or <Intelligent>
mode.
2. OSD Adjustment (Color)
Menu Description

You can set the color temperature according to your preference.

• <Cool 2> - Sets the color temperature of the screen to very cool.
• <Cool 1>- Sets the color temperature of the screen to cool.
• <Normal> - Sets the color temperature of the screen to the standard color temperature.
• <Warm 1> - Sets the color temperature of the screen to warm.
• <Warm 2> - Sets the color temperature of the screen to very warm.
Color Tone
• <Custom> - Select this menu to set the color temperature manually.

If you do not like the preset color temperatures, you can manually adjust the value of RGB.

• This menu is unavailable when < Color> is set to <Full> mode or

<Intelligent> mode.
• This menu is unavailable when < Angle> is set.
Using this menu, you can change the intensity of the colors of medium brightness.

Gamma • <Mode1> - <Mode2> - <Mode3>

This menu is unavailable when < Angle> is set.

(This is unavailable when < Bright> is set to <Dynamic Contrast> and <Cinema> mode.)
2. OSD Adjustment (SIZE&POSITION)

Menu Description

Moves the position of the display area on the screen horizontally.

H-Position • This function is only available in Analog mode.

• When a 720P, 1080i or 1080P signal is input in AV mode ,select <Screen Fit>to
adjust horizontal position in 0-6 levels.
Moves the position of the display area on the screen vertically.

V-Position • This function is only available in Analog mode.

• When a 720P, 1080i or 1080P signal is input in AV mode ,select <Screen Fit>to
adjust vertical position in 0-6 levels.
2. OSD Adjustment (SIZE&POSITION)
Menu Description

Supplied for the wide models only such as 16:9 or 16:10.

PC signals
• <Auto> - The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the
input signal.

• A signal not in the standard mode table is not supported.

• If the resolution is set to the optimal resolution, the aspect ratio does not change
Image Size whether the <Image Size> is set to <Auto> or <Wide>.

AV signals
• <4 : 3> - Displays pictures at the 4:3 aspect ratio.
• <16 : 9> - Displays pictures at the 16:9 aspect ratio.
• <Screen Fit> - If a 720P, 1080i or 1080P signal is input in HDMI/DVI input mode, the
picture is displayed as is without truncation.

This can only be set when the external input is connected through HDMI/DVI and
<PC/AV Mode> is set to <AV>.
Menu H-
You can adjust the horizontal position of the OSD.
Position
Menu V-
You can adjust the vertical position of the OSD.
Position
2. OSD Adjustment (SETUP&RESET)

Menu Description

Use this function to restore the visual quality and color settings to the factory defaults.
Reset
• <Yes> - <No>
Select a language for the OSD.

Language

The selected language is only applied to the product OSD. This setting does not affect
the other functions of the PC.
2. OSD Adjustment (SETUP&RESET)
Menu Description

This function provides user a low power mode which is realized by lowering the current of
the display panel.

• <75%>
When <75%> is selected, the power consumption is about 75% of default setting.
Eco Saving • <50%>
When <50%> is selected, the power consumption is about 50% of default setting.
• <Off>
When <Off> is selected, the function is turned Off .

This menu is unavailable when < Bright> is set to <Dynamic Contrast> mode.
You can turn the Off Timer on or off.
Off Timer
On/Off
• <Off> - <On>
Turns the power off automatically when the configured time is reached.
Off Timer
Setting
When <On> of <Off Timer On/Off> is selected, This function is available only.
Set to PC when connected to a PC.
Set to AV when connected to an AV device.

PC/AV Mode • This function does not support Analog mode.

• Supplied for the wide models only such as 16:9 or 16:10.
• If the monitor (when set to DVI or HDMI) is in power saving mode or is displaying
the message <Check Signal Cable>, press the
2. OSD Adjustment (SETUP&RESET)
Menu Description

Controls the repeat delay of a button.

Key Repeat
You can set to <Acceleration>, <1 sec> or <2 sec>. If <No Repeat> is selected, the
Time
button only responds once.
You can set the function of the Customized Key to one of the following.
Customized Key
•< Angle> - < Bright> - <Eco Saving> - <Image Size>
• <Auto> - The monitor automatically selects an input signal.
• <Manual> - Users have to manually select an input signal.
Auto Source
Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models.
The OSD automatically disappears if no action is taken by the user.
Display Time You can determine the time to wait before the OSD is hidden.
• <5 sec> - <10 sec> - <20 sec> - <200 sec>

Menu You can select the transparency of the OSD.

Transparency • <Off> - <On>
2. OSD Adjustment (INFORMATION)

Menu Description

Shows the frequency and resolution set on the PC.

INFORMATION
For models with an Analog interface only, <Analog/DVI/HDMI> is not shown in the
<Information>.
2. OSD Adjustment
OSD Lock
Menu Description

After pushing the "MENU" button more than 10 seconds, OSD function is locked (unlocked).
OSD Lock & Un-
Lock You can also adjust the brightness and contrast of the monitor with the OSD
adjustment locking feature

Factory Mode
Menu Description

Factory To enter the Service Function, set the Brightness/Contrast to 0 and press and hold the
Mode ENTER /SOURCE key for 5 seconds.
3. Circuit Description (New Part)

*. Scaler(Novatek)

SE1179LMRL-NT

-. Detailed Specifications
. LED Driver Control
Scaler integration LED driver
LED current adjustable from 15~70mA via register control

. Power
3.3V/1.2V power supply
support Ultra-Low Power standby Mode
Build in 3.3V to 1.2V LDO for ADC
3. Circuit Description (Scaler IC Block Diagram)
3. Circuit Description (Scaler IC Block Diagram)
Dual Port LVDS Connector

4String current Current

Feedback
Circuit

DRV
V-out Control
Circuit
LED
NT68751 SPI Data Flash

LQFP 128P
Connector 4M
Regulator 1.25V
I2C
Boost 1A+1H Main
EEPROM
Circuit LDO 3.3V

Osc
12MHz

DC-DC 5V EDID EDID

EEPROM EEPROM

Adaptor 14V HDMI D-Sub

3. Circuit Description (Power Flow Chart)
VLED
Boost

MAIN_5V PANEL_5V
IC600 BD610 Q401 LED Panel

CN600 IC402 Main E2PROM Feedback

+14V_ADP
+12V_ADP Vcc/Pin Pull up
IC601 MAIN_3.3V IC401 Flash
3.3V LDO Vcc/Pin Pull up
IC400
Function Key NT68751
26(TVCC)

D651
41(OSC)

59(Audio)

57/75/119(DVDD)

CN100 IC602 +1.25V MAIN_1.25V

CN100
VGA +5V_DSUB D104 BD661 27(ADC)
DSUB 1.25V Regulator
EDID_5V
56/120(CVDD)
CN101
CN200
HDMI1 D103 CN100
CN100 DSUB
DSUB
CHK_DSUB/I2C Pull up
CN300 +5V_HDMI
HDMI CN300
CN200HDMI
HDMI1
IDENT/I2C Pull up
CN300 IC300IC420
EDID E2PROM
Flash
HDMI2 Vcc
Vcc
/Pin
/Pin
HOLD
PullPull
up up
HDMI2
IC100IC420
EDID Flash
E2PROM
Vcc/Pin
Vcc PullPull
/Pin HOLD up up
3. Circuit Description (Circuit Diagram)
Function Connector

Analog Part

Scaler : SE1179LMRL-NT

HDMI Part
3. Circuit Description (Circuit Diagram)

Power
3. Circuit Description (Circuit Diagram)

LED Driver Part

3. Circuit Description (Main PBA)
3. Circuit Description (Main PBA)
No Block Description 비고

Scaler Besides the ADC, LVDS, and scaling part, an MCU

1 is embedded as well . All of them are integrated SE1179LMRL-NT
IC400 into one chip.
Flash Memory Stores the MCU program embedded in the scaler.
2 W25X40BVSSIG
IC401 It is of a flash type and rewritable.
3 IC403 Stores the OSD and various timing values. M24C16
4 IC100 The memory to which analog DDC data is input 24C02
5 IC300 The memory to which HDMI DDC data is input 24C02
Regulator An IC that receives DC voltage inputs. It is used S-1172B33-U5T1G
6
IC601/IC602 in circuits that stabilize the DC voltage . LD1117AG-ADJ-A
4. Assembly and Disassembly
Caution : 1. Turn the monitor off before beginning the disassembly process.
2. When disassembling the monitor, do not use any metal tools except for the provided jig.
3. Disassemble the monitor carefully as directed in the following procedures.

Description Picture Description

1. Remove the stand body shown in the

figure.

2. Turn the monitor over and insert your

hands into the top of the monitor at
the center and separate the front cover
in the direction of the arrow as shown
in the figure.
4. Assembly and Disassembly
Description Picture Description SCREWS

3. Remove the one(1) screw shown in the

figure and remove the LVDS, LED
Harness and Function wire cable then
remove the Shield-Bracket.

4. Remove the LCD panel.

4. Assembly and Disassembly
Description Picture Description SCREWS

5. Remove the two (2) screws shown in the figure.

6. Remove the main PBA from the Shield Bracket

then we get the PBA.

Reassembly procedures are in the reverse order of disassembly procedures.

5. Troubleshooting

1. Set custom mode as follows before beginning a repair.

• Resolution: 1920 x 1080

• H-frequency: 67.5 kHz
• V-frequency: 60 Hz

2. If the screen is blank, check whether the power cord is connected correctly.

3. Check the following circuits.

• When the raster does not appear: The Function PCB, Main PCB
• When 5V is generated but a blank screen is displayed: Main PCB

4. Press the MENU button and hold down the, “ (Enter/Source)” button for more than five (5) seconds to
factory reset.
5. Troubleshooting
No power

Symptom : -. When turning on the Power button after connecting the power, the LED at the
front of the monitor does not operate.
Major Checkpoints: -. Check the IC600 power fuse and IC600 output power.
-. Check the connections for the CN600 and the Main board.
-. Check the main board power part and also check whether there is any abnormal
output at other output terminals.
5. Troubleshooting
No power

Caution : Make sure to disconnect the power before working on the Main board.
5. Troubleshooting
The Circuit diagram when the power not turn on
5. Troubleshooting
The Circuit diagram when the power not turn on
 5. Troubleshooting
No video (Analog)

Symptom : -. Though the LED power turns on, the screen is blank when connecting the VGA cable.
Major Checkpoints: -. Check the D-sub cable connection.
-. Check whether the LVDS cable is connected correctly to the Panel.
-. Check whether the lamp connector of the Panel is connected correctly to the Main board.
5. Troubleshooting
No video (Analog)

Caution : Make sure to disconnect the power before working on the Main board.
5. Troubleshooting
The Circuit diagram when no video (Analog)
 5. Troubleshooting
No video (HDMI)

Symptom : -. Though the LED power turns on, the screen is blank when connecting the HDMI cable.
Major Checkpoints: -. Check the HDMI cable connection.
-. Check whether the LVDS cable is connected correctly to the Panel.
-. Check whether the lamp connector of the Panel is connected correctly to the Main board.
5. Troubleshooting
No video (HDMI)

Caution : Make sure to disconnect the power before working on the Main board.
5. Troubleshooting
The Circuit diagram when no video (HDMI)
5. Troubleshooting
*. Service Function OSD
5. Troubleshooting
5. Troubleshooting
5. Troubleshooting
 6. How to execute code
1. Enter the DDC EDID data when the AD board is replaced.
2. Download the DDC input program and the DDC file that corresponds to the model from the Quality Depart
ment of Samsung and install it using a jig as shown in the figure below, and then enter the data.

CN703
6. How to execute code (DDC)
6. How to execute code (DDC)
6. How to execute code (MCU code)
6. How to execute code (MCU code)
6. How to execute code (MCU code)
6. How to execute code (MCU code)
6. How to execute code (MCU code)
7. etc. (After replacing Main PBA)

You have to
 EDID input (Analog and HDMI)
 Firmware install – MICOM S/W input(use DDC manager)
 PC Auto Color Adjust
-. select language “Deutsch” in OSD, then
hold down Enter key for 5 seconds
 Factory Reset
-. press the MENU button
-. hold down the “Enter/Source” button for more than five (5)
seconds to return the monitor to factory mode.