Scribd
Upload
676 views1 page

ASME B1.1 Dimensions, Coarse Thread

The document lists specifications for ASME B1.1 coarse thread dimensions including nominal size, major and minor diameters, pitch, lead angle, and tensile stress areas for various thread sizes ranging from #1 to 4 inches. Key measurements included are thread diameter, pitch per inch, minor diameter at the pitch diameter, lead angle at the pitch diameter, and reference areas for minor diameter and tensile stress. Thread sizes are shown in both decimal inches and fractional inches.

Uploaded by

hughob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
676 views1 page

ASME B1.1 Dimensions, Coarse Thread

The document lists specifications for ASME B1.1 coarse thread dimensions including nominal size, major and minor diameters, pitch, lead angle, and tensile stress areas for various thread sizes ranging from #1 to 4 inches. Key measurements included are thread diameter, pitch per inch, minor diameter at the pitch diameter, lead angle at the pitch diameter, and reference areas for minor diameter and tensile stress. Thread sizes are shown in both decimal inches and fractional inches.

Uploaded by

hughob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASME B1.

1 Dimensions, Coarse Thread


Basic
Nominal Major Thd/in Basic Pitch Minor Lead Angle at Basic Minor dia Tensile Stress
Size Diameter (1/P) Diameter Diameter Pitch Diameter area (ref) Area (ref)
inch D (in) in^-1 D2 (in) D1 (in) (Degrees) (Minutes) in^2 (ref) in^2 (ref)
#1 0.0730 64 0.063 0.0561 4 31 0.00218 0.00263
#2 0.0860 56 0.074 0.0667 4 22 0.00310 0.00370
#3 0.0990 48 0.086 0.0764 4 26 0.00406 0.00487
#4 0.1120 40 0.096 0.0849 4 45 0.00496 0.00604
#5 0.1250 40 0.109 0.0979 4 11 0.00672 0.00796
#6 0.1380 32 0.118 0.1042 4 50 0.00745 0.00909
#8 0.1640 32 0.144 0.1302 3 58 0.01196 0.0140
#10 0.1900 24 0.163 0.1449 4 39 0.01450 0.0175
#12 0.2160 24 0.189 0.1709 4 1 0.0206 0.0242
1/4 0.2500 20 0.218 0.1959 4 11 0.0269 0.0318
5/16 0.3125 18 0.276 0.2524 3 40 0.0454 0.0524
3/8 0.3750 16 0.334 0.3073 3 24 0.0678 0.0775
7/16 0.4375 14 0.391 0.3602 3 20 0.0933 0.1063
1/2 0.5000 13 0.45 0.4167 3 7 0.1257 0.1419
9/16 0.5625 12 0.508 0.4723 2 59 0.162 0.182
5/8 0.6250 11 0.566 0.5266 2 56 0.202 0.226
3/4 0.7500 10 0.685 0.6417 2 40 0.302 0.334
7/8 0.8750 9 0.803 0.7547 2 31 0.419 0.462
1 1.0000 8 0.919 0.8647 2 29 0.551 0.606
1 1/8 1.1250 7 1.032 0.9704 2 31 0.693 0.763
1 1/4 1.2500 7 1.157 1.0954 2 15 0.890 0.969
1 3/8 1.3750 6 1.267 1.1946 2 24 1.054 1.155
1 1/2 1.5000 6 1.392 1.3196 2 11 1.294 1.405
1.6250
1 3/4 1.7500 5 1.62 1.5335 2 15 1.74 1.90
1.8750
2 2.0000 4 1/2 1.856 1.7594 2 11 2.30 2.50
2 1/4 2.2500 4 1/2 2.106 2.0094 1 55 3.02 3.25
2 1/2 2.5000 4 2.338 2.2294 1 57 3.72 4.00
2 3/4 2.7500 4 2.588 2.4794 1 46 4.62 4.93
3 3.0000 4 2.838 2.7294 1 36 5.62 5.97
3 1/4 3.2500 4 3.088 2.9794 1 29 6.72 7.10
3 1/2 3.5000 4 3.338 3.2294 1 22 7.92 8.33
3 3/4 3.7500 4 3.588 3.4794 1 16 9.21 9.66
4 4.0000 4 3.838 3.7294 1 11 10.61 11.08

You might also like