Name: Aaliyah Garcia Date: 03/19/20
Blackbody Spectrum Simulation Homework
1)In this question, you will use the Blackbody Spectrum Simulation to investigate
how the spectrum of electromagnetic radiation emitted by objects is affected by the
object's temperature. In this simulation, you can input the temperature and observe
the spectrum of the radiation emitted.
a) The temperature of stars in the universe varies with the type of star and the age of the
star among other things. By looking at the shape of the spectrum of light emitted by a
star, we can tell something about its average surface temperature.
i) If we observe a star's spectrum and find that the peak power occurs at the border
between red and infrared light, what is the approximate surface temperature of the
star? (in degrees C) the stars approximate surface temp would
be 6000 degrees C
ii) If we observe a stars spectrum and find that the peak power occurs at the
border between blue and ultraviolet light, what is the surface temperature of the
star? (in degrees C) it would approximately be 6450 degrees C
b) Light bulbs operate at 2500 degrees C.
i) What is the wavelength at which the most power is emitted for a light bulb operating at
2500 C? the wavelength is 1.159
ii) Explain why regular incandescent bulbs waste a lot of energy. Be sure to
include your reasoning.
they waste more because they require more.
c) Investigate how the observed spectrum responds to changing temperature. Note you
are only able to change temperature here, but should consider how the spectrum
(power vs. color) would change if you varied other characteristics about the object.
True False If the only change you make is to decrease the temperature of
an object, the amount of power emitted at 1000 nm will increase in some cases.
True False If the only change you make is to decrease the temperature of
an object, the total amount of power emitted decreases in all cases.
True False If you were to increase the surface area of a bulb filament, but
leave its temperature unchanged, then a larger fraction of its total power emitted
would be emitted as IR radiation.
d) Use the Spectrum Simulation to investigate changes in the amount of light at visible
wavelengths due to this change in temperature from 2500 C to 2000 C.
i) What is the approximate ratio between the powers emitted at 500 nm at 2000 degrees C
to that at 2500 degrees C, that is, the power emitted at 500 nm at 2000 degrees C
divided by the amount of power at 500 nm at degrees 2500 C?
3900 C
ii) In question 1b, we found the wavelength for the peak power of a bulb
operating at 2500 degrees C. What is the approximate peak wavelength for a bulb
operating at 2000 degrees C? 1.449
e) You turn up the dimmer switch so that the temperature of the filament reaches
2600 degrees C. The light bulb filament has an area of 6.45 x 10-4 m2 (0.1 square
inches) and an emissivity of 0.8. How much electrical power must it be using?
.800000416
2) In this problem we will explore the greenhouse effect by using the Greenhouse
Effect Simulation available from the 1010 homepage.
a) Explore the simulation.
True False The only effect of increasing the number of clouds is to
reduce the amount of sunlight absorbed by the surface of the earth.
True False Increasing the concentration of greenhouse gases, increases
the amount of radiation that Earth emits to space.
True False When sunlight encounters a cloud, the cloud reflects about
10% of the sunlight back to space.
True False When there is a very large concentration of greenhouse gases,
most of the IR radiation reaching space has interacted with greenhouse gas molecules
on its way from the surface to space.
True False The total amount of radiation absorbed by the Earth’s surface
is not affected by the concentration of greenhouse gases in the atmosphere.
True False At higher temperatures, the Earth’s surface emits more IR
radiation.
True False During the ice age, the amount of sunlight absorbed by the Earth’s
surface decreased.
True False All greenhouse gases are from anthropogenic sources (that is
due to man’s activities).
b) Explain your reasoning for your answer to the T/F question “Increasing the
concentration of greenhouse gases, increases the amount of radiation that Earth emits
to space.” and include the physics principles that support your reasoning.
i put true
c) From your observations of the simulation and your understanding of the basic
physics principles of energy and radiation, explain why the average surface
temperature of the earth increases in the presence of the greenhouse gases. Be sure to
include reasoning.
cause there are more gasses coming through
d) As the Sun ages, it will cool and the amount of power it produces will decrease. If
at some point in the future, this power drops such that the solar power/m^2 at the
earth drops by 10% to 1250 Watts/m^2, what will the surface temperature of the
Earth be? (Assume that the fraction of sunlight absorbed by the Earth's surface
remains the same and that the fraction of the IR radiation emitted by the Earth's
surface that reaches space remains the same as it is for today (see lecture notes).)
it would be below 200 C
e) If in the future, the amount of greenhouse gases in the atmosphere rise so that 10%
less of the IR radiation emitted from the earth's surface is getting out through the
atmosphere than at present, calculate how many degrees Kelvin hotter the surface of
the earth would be? (Assume that the amount of clouds and other complicated stuff
like that does not change.)
190
f) In class, we used the temperature sensor to measure the temperature of a hot piece
of metal and then saw the effect of sticking a piece of glass in front of the metal.
i) If we look at Earth from space with temperature probe similar to the one we
used in class and measure the amount of IR radiation emitted to space by the
Earth, what temperature would we measure?
225 K 255 K 280 K 288 K 298 K
ii) When the concentration of greenhouse gases increases, most of the IR radiation
that escapes to space last interacted with a greenhouse gas molecule at a ...
lower altitude higher altitude
