M1 N3

4 5 26 27
20" 1"

WELD DETAIL 180°

No. 3

13434" N2

[152]
[190]
C1

6"
1"
[254]

72
10"
[3423] 4" BILL OF MATERIALS (BOM)
2 LIFTING LUG
9"
12416 LOCATED AT MATERIAL
1 [3164]
45° and 135° 240° 120° ITEM QTY DESCRIPTION
SPEC.
N8 12032" L2 L1
WELD DETAIL Shell Cylinder Plate 6.35 X 1065 X 1892 mm Circumference, roll to 298.5 mm inside SA-516-70

[1065]
3/4" [3048]

32"
1 1

4129
No. 11 radius
L1
WELD DETAIL 2 1 Shell Cylinder Plate 6.35 X 2440 X 1892 mm Circumference, roll to 298.5 mm inside SA-516-70
No. 6 radius
3 1 F&D Torispherical Head, OD=24 in, 0.25" MWT, 9.525 Nom, SF=1.5", Crown Radius SA-516-70
WELD DETAIL
WELD DETAIL Lo=24 in, knuckel radius 2 in.
No. 2
NO. 1
N1
270° N2 4 1 M-1 Body Flange, ASME B16.5, WNRF, NPS 24, Cl. 150, Sch. Std, SA-105
1 4" 4"
C2
90° 5 1 M-1 Bolted Cover Flange, ASME B16.5, Blind Flange RF, NPS 24, Cl. 150 SA-105
OD 24" 6 2 N1 & N2 WNRF, ASME B16.5, NPS 4 Class 150, Sch 80 SA-105
OD [610]
7 1 N1 Pipe Neck, ASME B36.10M, Smls pipe, NPS 4, Sch 80,[568 mm] length SA-106-B

8 1 N2 Pipe Neck, ASME B36.10M, Smls pipe, NPS 4, Sch 80,[87 mm] length SA-106-B
WELD DETAIL
No. 1 2 9 1 N3 WNRF, ASME B16.5, NPS 1 Class 150, Sch 160 SA-105

10 1 N3 Pipe Neck, ASME B36.10M, Smls pipe, NPS 1, Sch 160, [84 mm] length SA-106-B
[3505]
138"

11 1 N3 Pipe, ASME B36.10M, Smls pipe, NPS 1, Sch 160, [357 mm] length SA-106-B
9"

[81566]
321132

N7A N6A N4 N6B N7B 12 1 N3 Long Radius Elbow, ASME B16.9, 90° LR Elbow, BE, NPS 1, Sch 160 SA-234-WPB
1"
5916 N5 2" 2" 45° 3/4" 2" 2"
[1500] 3/4"
315° 13 6 N5A, N5B. N6A, N6B, N7A, N7B Nozzle Flange, WNRF, ASME B16.5, NPS 2 Class SA-105
150, Sch 80
L2
14 6 N5A, N5B. N6A, N6B, N7A, N7B Pipe Neck, ASME B36.10M, Smls pipe, NPS 2, Sch SA-106-B
WELD DETAIL NAME PLATE BRACKET
N8 80, [93 mm] length
1" LOCATED AT 0°
WELD DETAIL No. 4 452 N5A N5B
No. 7 [1156] 0° 2" 2" 3/4" 15 2 N4, N8, Threaded Coupling, ASME B16.11, NPS 3/4, Class 6000 SA-105
WELD DETAIL 16 1 Demister Ring Support, OD [597 mm] x ID [495 mm] thk: [6.35 mm], segmented SA-516-70
N1 3634" No. 8
WELD DETAIL 17 1 Namplate Bracket clip. [60 mm] x [100 mm] x [6.35 mm] SA-36
4" [933] No. 5
1" 21"
632 18 1 Namplate Bracket plate support. [180 mm] x [185 mm] x [6.35 mm] SA-36
18" 282
[457] N4A
[169] 19 3 Lifting lug pad [ 178 mm] x [ 50 mm] x [6.35 mm] - Note 3 SA-36
1"
[724] 2"
222 1"
N6A 222 20 3 Lifting lug [102 mm] x [152 mm] x [9.5 mm] SA-36
2" [571] N7AB
[571] 2" B&T Cia. Ltda. 21 1
Skirt Cylinder Plate [ 6.35mm] X [ 341mm] X [ 1892 mm] Circumference, roll to 298.5 SA-36
mm inside radius
1" 1321" 1 TAILING LUG QUITO - ECUADOR
102 LOCATED AT 135° 22 1 Skirt base Ring, OD [785 mm] x ID [457 mm] thk: [15 mm], bolt circle [715 mm] SA-36
N6B [343] SERVICIO: K.O.DRUM
2" [267]
1" 23 2 Skirt Opening pipe, ASME B36.10M, Smls pipe, NPS 4, Sch 80,[45 mm] length SA-106-B
1" 42 PROPIETARIO: ARCO SERVICES
N7B 102 3 N4B
2" [267] C3 [114] 2" 24 20 M1 Series 8 Bolts 1-1/4" Diameter, 7" length SA-193-B7
WELD DETAIL 0"
ref.
TEMP. DISEÑO: 165 °F CORROSIÓN: 0.125 in
No. 9 [0] 25 40 M1 Nuts 1-1/4" Diameter, Heavy Hexagonal. SA-194-2H
WELD DETAIL PRESIÓN DISEÑO: 50 psi CAPACIDAD: 191 gl
No. 3 psi 26 1 M1 Gasket, ASME B16.20 NPS 24 Class. 150, Spiral wound CG, 1/8" thk SS304 Graphite
7 PRESIÓN PRUEBA: 65 DIÁMETRO: 20 in
[356]

1016" N3
14"

16"
[300]

[175]
1113

8"

PESO VACIO: 1380 lb LONGITUD: 138 in S/S 27 1 M1 Hinge Assembly (see detail Sheet 2) Carbon Steel
67

[265] 1"
28 1 Nameplate [3mm] X [169mm] X [175mm] SS-304
MATERIAL: CABEZA SA-516-70 CUERPO SA-516-70
18" in CUERPO 1/4 29 4 Pop Rivets 3/16" Diameter Aluminium
WELD DETAIL [457]
ESPESOR : CABEZA 1/4 in
No. 10 3029"
32 30 2 Ground Lugs [10mm] X [50mm] X [50mm] SS-304
[785] NUMERO PROYECTO: O0176A TAG NO.: V-41562
TIPO DE TANQUE: RECIPIENTE VERTICAL 31 1 Mesh Demister, OD 23.5 in, 6 in thick SS-304

CODE: ASME SEC VIII DIV 1 - EDICION 2017 DOCUMENTS OF REFERENCE

AÑO : 2017 CERTIFICADO POR: DOCUMENT No. REVISION DESCRIPTION
DISEÑADO POR: B&T B54-RON-20-HDD-004 C Hoja de datos K.O. DRUM

O0176A-MC-V41562-001 C Compress Pressure Vessel Design Calculation

O0176-M-V41562-01 Sheet 1 C General Arrangement K.O. Drum

VESSEL CONNECTION SCHEDULE O0176-M-V41562-01 Sheet 2 C Fabrication Details

WELD SIZE O0176-M-V41562-01 Sheet 3 C Welding Details
MARK QTY SERVICE NPS CLASS SCH/(mm) TYPE POSITION REINFORCEMENT
EXTERNAL INTERNAL
PROJECTION PROJECTION
ELEVATION ORIENTATION
WELD
DETAIL
BOM Items
Numbers
DESIGN DATA
a b c
N1 1 Gas Inlet 4 150 80 WNRF SHELL No (152 mm) (416 mm) (933 mm) 270° 4 [4.8 mm] --- --- 6, 7 Design Code: ASME Section VIII Div.1 Edition 2017 REVISION HISTORY
N2 1 Gas Outlet 4 150 80 WNRF SHELL No (152 mm) (0 mm) (3423 mm) 90° 5 [4.8 mm] --- --- 6, 8
Code Stamp: NO NB REGISTRATION: NO
N3 1 Drain 1 150 160 WNRF BOTTOM HEAD No (152 mm) (0 mm) (-258 mm) 180° 5 [4.8 mm] --- --- 9, 10, 11, 12 REV. DATE DESCRIPTION DRAWN CHECKED APPROVED
Internal Design Pressure:(3) 50 psi 3.5 kg/cm2
N4A 1 Level Gauge 2 150 80 WNRF SHELL No (152 mm) (0 mm) (724 mm) 0° 5 [4.8 mm] --- --- 13, 14 External Design Pressure: 0.0 psi 0.00 kg/cm2 N/A C 15/4/2018 FOR CLIENT APPROVAL D.V. C.S. D.V.
N4B 1 Level Gauge 2 150 80 WNRF SHELL No (152 mm) (0 mm) (114 mm) 0° 5 [4.8 mm] --- --- 13, 14 Design Temperature: 165 °F 73.9 °C 0 10/01/2020 FOR CONSTRUCTION D.V. C.S. D.V.
3
N5 1 Pressure Gauge 4 6000 (8.76 mm) CPLG THRD SHELL No (38 mm) (0 mm) (1500 mm) 45° 6 [4.8 mm] --- --- 15 M.A.W.P 50 psi 3.5 kg/cm2 @ 165.00 °F
N6A 1 Level Switch High 2 150 80 WNRF SHELL No (152 mm) (0 mm) (571 mm) 45° 5 [4.8 mm] --- --- 13, 14 M.D.M.T -20.00 °F 3.5 kg/cm2 @ -28.89 °C
N6B 1 Level Switch Low 2 150 80 WNRF SHELL No (152 mm) (0 mm) (267 mm) 45° 5 [4.8 mm] --- --- 13, 14 Service: K.O. DRUM (NON LETHAL)
N7A 1 Level Switch High 2 150 80 WNRF SHELL No (152 mm) (0 mm) (571 mm) 315° 5 [4.8 mm] --- --- 13, 14 Operating Pressure ATM @ 105 °F
N7B 1 Level Switch Low 2 150 80 WNRF SHELL No (152 mm) (0 mm) (267 mm) 315° 5 [4.8 mm] --- --- 13, 14 Liquid specific gravity 0.853
PSV-(note10) 3 (8.76 mm) CPLG THRD (38 mm) (0 mm) (3048 mm) [4.8 mm]
N8 1 6000 SHELL No 0º 6 --- --- 15 Shell / Head Corrosion Allowance: 0.125 in 3.2 mm
M1 1 Inspection 2
4
150 40 WNRF BODY FLANGE - - - - -------- - ------- Nozzles Corrosion Allowance: 0.125 in 3.2 mm
BEITE B&T CÍA. LTDA.
NOTES Radiographic Examination: RT-1
TOLERANCES Shell Longitudinal Joint FULL UW-11(a) / TYPE 1 industria en acero
QUITO - ECUADOR
1 All linear dimensions above are in inches, below are in millimeter in/[ mm]
Head to Shell Joint: FULL UW-11(a)/TYPE 1 THIS DRAWING AND THE CONFIDENTIAL TRADE SECRET INFORMATION ON IT ARE THE PROPERTY OF BEITE , POSSESSION
2 Flange bolt holes shall straddle vessel cardinal center lines Length 0.00 mm to 150 mm ±0.078 in [2 mm] DOES NOT CONVEY ANY RIGHTS TO DISCLOSE, REPRODUCE OR USE SAME FOR ANY PURPOSE OTHER THAN THAT GRANTED
Flange to Shell Circum. Joint FULL UW-11(a)/TYPE 1 BY EXPRESS WRITTEN PERMISSION OF BEITE. THIS DRAWING IS TO BE RETURNED TO FULTON UPON ITS REQUEST OR
Length 150 mm to 300 mm ±0.125 in [3 mm]
3 Reinforcing pad shall be provided with a hole of 1/4", located on the bottom portion of the pad Shell to Shell Circum. Joint FULL UW-11(a)/TYPE 1 COMPLETION OF AUTHORIZED USE.
Length > 300 mm ±1 4 in [6 mm]
Impact Testing: Not Required per UG-20(f) TAG
4 All connections to be covered for shipping Nozzle Internal Projection +0.125 in [3 mm]/-0.00 in [ 0.0 mm]
P.W.H.T: None
SCALE: Indicated
Nozzle External Projection ±0.125 in [3 mm]
5 Cut edges shall be rounded
Nozzle Plumb and Level ± 2º
Hydrostatic test pressure: 65 psi 4.56 kg/cm2 Note 6 DRAWN
D.X.V.
V-41562
BY: 10/01/2020
6 Design pressure not include the hydrostatic head Test position / Test Temperature:: Horizontal / 10 °F (minimum)
Fillet Size +0.078 in [2 mm] / -0.0 in [-0.0 mm]
Wind Design: ASCE 7-10 (75 km/h) CHECKED CUSTOMER: ARCO SERVICES
7 Test pressure value does no include hydrostatic head Joint Category A: 116in [1.5 mm ] C.S. 10/01/2020
Maximum Missalignment UW-33 Seismic Code: NEC 2015, Zone II, Soil type II BY: OWNER: ORION ENERGY
Joint Category B & C: 116in [1.5 mm ]
8 For welding Details see DWG. O0176A-M-V41562-01 Sheet 3 Additional Loads UG-22 APPROVED DRAWING NAME
Joint Category B and C: 5 32in [4 mm] D.X.V. 10/01/2020
Maximum Reinforcement UW-35 Empty Weight: 1,783 lb 809 kg BY: K.O. DRUM, General Arrangement
9 Lifting lugs and PADS shall be checked with MT or PT after welding Joint Category A: 3 32 in [ 2.5 mm]
Longitudinal Joints are Category A, Circumferential Joints, are Category B, Nozzles joints to shell an head area Operating Weight: 3,770 lb 1,710 kg Sheet No. DRAWING No. Rev. No.
Job No. O0176A
10 Include nozzle for overpressure protection per UG-125 Category D Test Weight: 4,116 lb 1,867 kg 1 of 3 O0176A-M-V41562-01 Sheet 1 0
ARCHIVO/FILE CAD: O0176A-M-V41562-01 Rev. 0.dwg FDP ISO A2H_1 : ISO A2 594 x 420mm