0% found this document useful (0 votes)
63 views2 pages

Aprisa XE Datasheet FCC 2500 MHZ

Aprisa XE Datasheet FCC 2500 MHz

Uploaded by

redge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
63 views2 pages

Aprisa XE Datasheet FCC 2500 MHZ

Aprisa XE Datasheet FCC 2500 MHz

Uploaded by

redge
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FCC 2.

5 GHz licensed band Datasheet

POINT-TO-POINT DIGITAL MICROWAVE LINKS


FCC 2.5 GHz licensed band

Aprisa XE: maximizing spectrum use and making challenging long distance The Aprisa XE in brief
links possible l Licensed 2.5 GHz frequency band
l Built-in cross-connect and multiplexer
l Efficient future-proof single-box architecture: the Aprisa XE’s built-in multiplexer and cross-connect l Up to 2392 kbit/s capacity
eliminate external equipment and minimize the over-the-air requirements, with customer-configurable l 250 kHz and 500 kHz channel sizes
interface slots integrating all IP, voice and data traffic. Configuration, performance monitoring and l QPSK to 64 QAM modulation
diagnostics are easy with the 4RF embedded web-based element management system, SuperVisor. l Range of 80+ miles
l Industry-leading reliability
l High capacity: class-leading spectral efficiency and up to 64 QAM modulation make the maximum use l Web server and SNMP management
of the available spectrum, with industry leading capacity of up to 2392 kbit/s in a 500 kHz channel. l All voice, data and IP applications
l MHSB and HSD protection options
l Long range: a single 2.5 GHz Aprisa XE can link distances in excess of 80 miles, overcoming the problems
of water, environmental conditions and topographical obstacles. Future-proof single-box architecture

l Carrier-class performance: Aprisa XE links are engineered to achieve ‘five 9s’ availability, benefiting
from state of the art forward error correction and inherent low latencies, for unrivaled quality of service.

l Cost effective: the Aprisa XE has a low total cost of ownership, providing a rapid return on investment
by minimizing both capital and operational expenditure.

l Redundancy options: Monitored Hot Standby and Hitless Space Diversity are available for protection in
mission-critical applications.

l Reliable: the Aprisa XE has an actual MTBF of 95.72 years. It can be relied upon to perform in the harshest
and most remote environments.
FCC 2.5 GHz licensed band Datasheet
SYSTEM SPECIFICATION

RF BAND TUNING RANGE SYNTHESIZER STEP SIZE INTERFACES

FREQUENCIES 2500 MHz 2314 – 2350 MHz 62.5 kHz ETHERNET Integrated 4-port 10 / 100Base-T switch with port-based rate limiting, VLAN
MODULATION TYPES Software configurable: QPSK / 16 / 32 / 64 QAM tagging and QoS Support

FREQUENCY STABILITY Short term ± 1 ppm (environmental effects and power supply variations) E1 / T1 Quad 120 ohm G.703 / 4
Long term ± 2 ppm (aging of crystal oscillators ≈ over 5 years)
DATA Quad V.24 asynchronous, synchronous and over sampling mode
ANTENNA CONNECTION N-type female 50 ohm Single synchronous X.21  /  V.35  /  RS-449  /  RS-530

TRANSMITTER ANALOG Dual 2-wire FXS / FXO (POTS); Quad 4-wire E&M

POWER OUTPUT +15 dBm to +29 dBm in 1 dB steps AUXILIARY INTERFACES

RECEIVER ALARMS 4 external alarm outputs, 2 external alarm inputs

MAXIMUM INPUT LEVEL –20 dBm CONFIGURATION Embedded web server with SNMP

DYNAMIC RANGE 58 to 87 dB at 10-6 BER MANAGEMENT Ethernet interface for SuperVisor and SNMP; V.24  setup port

C/I RATIO Co-channel QPSK better than 16 dB RSSI Front panel test point

16 QAM better than 20 dB ENVIRONMENTAL

32 QAM better than 23 dB OPERATING +14° F to +122° F (–10° C to +50° C)

64 QAM better than 27 dB STORAGE –4° F to +158° F (–20° C to +70° C)

First adjacent channel better than –5 dB HUMIDITY Maximum 95 % non-condensing

Second adjacent channel better than –30 dB MECHANICAL

DUPLEXER (bandpass) PASSBAND TX / RX SPLIT TUNING RANGE RACK MOUNT 19” 2U high (internal duplexer)

J1 4.0 MHz ≥ 32 MHz 2300 – 2700 MHz WEIGHT 23 lbs (10 kg) typical

POWER SUPPLY PROTECTED OPTIONS

INPUT RANGE 115 / 230 VAC, 50 / 60 Hz MHSB ≤ 4 dB splitter / cable loss, ≤1 dB TX relay / cable loss
±12 VDC (10.5 – 18 VDC), ±24 VDC (20.5 – 30 VDC), ±48 VDC (40 – 60 VDC) (system gain reduced by a maximum of 5 dB)

POWER CONSUMPTION 53 – 180 W input power (dependent on interface cards fitted and transmitter HSD ≤ 1 dB TX relay / cable loss, < 25 ms TX switching / hitless RX switching
output power level) COMPLIANCE

RADIO FCC CFR 47 Part 27

EMI /EMC FCC CFR 47 Part 15, EN 301 489 Parts 1 & 5
SAFETY EN 60950
CSA 253147 applicable for 48 VDC and 24 VDC product variants

ENVIRONMENTAL ETS 300 019 Class 3.2, WEEE

SYSTEM PERFORMANCE

250 kHz CHANNEL QPSK 16 QAM 32 QAM 64 QAM

CAPACITY 1 gross ( T1 + wayside ) 408 ( 6 TS + 24 ) kbit/s 824 ( 12 TS + 56 ) kbit/s 1032 ( 16 TS + 8 ) kbit/s 1240 ( 19 TS + 24 ) kbit/s

RECEIVER SENSITIVITY 2 –101 dBm –95 dBm –92 dBm –89 dBm

SYSTEM GAIN 2
130 dB 124 dB 121 dB 118 dB

500 kHz CHANNEL

CAPACITY 1 gross ( T1 + wayside ) 792 ( 12 TS + 24 ) kbit/s 1592 ( 1 T1 + 8 ) kbit/s 1992 ( 1 T1 + 408 ) kbit/s 2392 ( 1 T1 + 808 ) kbit/s

RECEIVER SENSITIVITY 2 –99 dBm –93 dBm –90 dBm –87 dBm

SYSTEM GAIN 2
128 dB 122 dB 119 dB 116 dB

NOTES
1 T1 capacities are specified as unframed. The management Ethernet capacity must be subtracted from the gross capacity (default 64 kbit/s).
2 Performance specified at the antenna port for 10-6 BER. Figures for 10-3 BER are typically 1 dB better.

ABOUT 4RF
Operating in more than 140 countries, 4RF provides radio communications Copyright © 2017 4RF Limited. All rights reserved. This document is protected
equipment for critical infrastructure applications. Customers include by copyright belonging to 4RF Limited and may not be reproduced or
utilities, oil and gas companies, transport companies, telecommunications republished in whole or part in any form without the prior written consent For more information please contact
operators, international aid organisations, public safety, military and security of 4RF Limited. While every precaution has been taken in the preparation of EMAIL [email protected]
organisations. 4RF point-to-point and point-to-multipoint products are this literature, 4RF Limited assumes no liability for errors or omissions, or from
URL www.4rf.com
optimized for performance in harsh climates and difficult terrain, supporting any damages resulting from the use of this information. The contents and
IP, legacy analog, serial data and PDH applications. product specifications within it are subject to revision due to ongoing product
improvements and may change without notice. Aprisa and the 4RF logo are Version 9.4.0
trademarks of 4RF Limited.

You might also like