Bore Gauge

Bore Gauge is the comparative measuring instrument which measures internal diameter of a hole by comparing with master gauge (micrometer, ring
gauge etc.). Center of prove and anvil are guided to diameter part of a hole by guide assembly and displacement of contact point is transferred to dial
indicator (Automatic centripetal mechanism ) by right angle change in the ratio of 1 : 1 with cam mechanism.
Measurement accuracy is changed according to graduation (resolution) of used dial indicator. Measuring range are available from minimum φ6mm to
maximum φ450mm according to size of diameter.

Bore Gauge (CD type)

• Compliance with JIS B 7515A.
• Anvil and Contact point are using the carbide ball.
• The measuring depth can be extend using the extension rod to measure a deep hole.

Dimensions

φ8Driving Rod Depth 32

A
B(Measuring Depth） 123
22.5

φD2
11

φD1

φ12
L

Edge of Point Carbide Interchangeable Rod

H
φD4 Interchangeable Rod
W

18.2
11.9
6.4 Edge of point Carbide
φD4 9 Edge of point Carbide

φ1 W
φD3 φD4

2.
7

φ2
W
0
CD-35、CD-35S CD-60、CD-60S

unit：mm

Dimension Table ： Standard

Model A B L H W φD1 φD2 φD3 φD4
CD-150 CD-35 229.4 100 11.9 6.4 φ12.7 9 22 1.5

Measuring Range 50~150mm

CD-35S CD-60
CD-150
282
282
150
150
18.2
28.9
9
9
φ20
38
12
12
22
22 12.8
1.5
2
Short size CD-160 282 150 28.9 9 50 12 22 12.8 2
Measuring Range 18~35mm CD-250 385 250 100.9 12 90 15 25 19.8 3
CD-400 385 250 100.9 12 90 15 25 19.8 3
unit：ｍｍ
Dimension Table ： Short size
Model A B L H W φD1 φD2 φD3 φD4
CD-35S 179.4 50 11.9 3.4 φ12.7 9 22 1.5
CD-60S 182 50 18.2 9 φ20 12 22 1.5
CD-150S 182 50 28.9 9 38 12 22 12.8 2
CD-160S 182 50 28.9 9 50 12 22 12.8 2
CD-250S 285 150 100.9 12 90 15 25 19.8 3
CD-400S 285 150 100.9 12 90 15 25 19.8 3
Dial gauge is an optional item. unit：ｍｍ

Specification
Measuring Effective Total Range Adjacent Number Sub Weight
Probe Depth Repeatability Measuring Guide Support
Model Range Measuring Error Error Number of Anvils of
(mm) (µm) Force Force Washers Anvil (g)
(mm) Range(mm) (µm) (µm)
CD-35 18-35 100 Incream 9pcs./2mm 2 – 160
1.2 4N or less 6N or less
CD-60 35-60 150 Incream 6pcs./5mm 4 – 230
Standard type

CD-150 50-150 150 Incream 11pcs./5mm 4 50 250

5N or less 10N or less
CD-160 100-160 150 Incream 13pcs./5mm 4 – 310
1.6
CD-250 160-250 250 Incream 6pcs./15mm 7 – 740
6N or less 15N or less
CD-400 250-400 250 Incream 5pcs./15mm 7 75 960
2 1 0.5
CD-35S 18-35 50 Incream 9pcs./2mm 2 – 150
1.2 4N or less 6N or less
CD-60S 35-60 50 Incream 6pcs./5mm 4 – 210
Short type

CD-150S 50-150 50 Incream 11pcs./5mm 4 50 230

5N or less 10N or less
CD-160S 100-160 50 Incream 13pcs./5mm 4 – 290
1.6
CD-250S 160-250 150 Incream 6pcs./15mm 7 – 630
6N or less 15N or less
CD-400S 250-400 150 Incream 5pcs./15mm 7 75 720

43
 Bore Gauge & Micro-hole Test

Bore Gauge (CD type) for shallow hole

Dimensions

Fitting Holeφ8
2.5 Ｂ (Measuring Depth) 100 23

φ22
φ9
Ｃ
CD-35F
Measuring Range 15~35mm CD-35F
Dial gauge is optional item.

Ｆ
Ｄ
φＥ
2.5mm

CD-60F
unit：mm
Dimension Table
Model A B C D E F
CD-35F 275.5 150 10.6 15.7 5 10
CD-60F 275.5 150 18 35.7 5 14.3
Internal measurement is possible
CD-150F 275.5 150 22 50.7 5 22.7
at the position from shallow hole CD-35FS 175.5 50 10.6 15.7 5 10
bottom by 2.5mm. CD-60FS 175.5 50 18 35.7 5 14.3
CD-150FS 175.5 50 22 50.7 5 22.7
CD-150F unit：mm

Specification
Measuring Range Effective Measuring Total Range Error Adjacent Error Anvil Weight
Model
（mm） Range（mm） （µm） （µm） Repeatability（µm） （pcs.） （g）
CD-35F 15∼35 1.2 4 1 1 11 180
CD-60F 35∼60 1.2 4 1 1 6 200
CD-150F 50∼150 1.2 4 1 1 11 210
CD-35FS 15∼35 1.2 4 1 1 11 140
CD-60FS 35∼60 1.2 4 1 1 6 160
CD-150FS 50∼150 1.2 4 1 1 11 170

Bore Gauge (CN type) for small hole

• These are bore gauges for small holes of which internal diameter is 18.5mm or less and high accuracy measuring is possible as well as
standard type bore gauges.

Dimensions Fitting Holeφ8

A

φ15

CN-10 CN-18
Measuring Range 6~10mm Measuring Range 10~18.5mm
B (Measuring Depth)

φD

Dimension Table
Model A B C D
C

CN-10 80 49 5.4 4
unit：mm CN-18 80 100 8.5 6
unit：mm

Specification
Measuring Range Effective Measuring Total Range Error Adjacent Error Repeatability Weight
Model
（mm） Range（mm） （µm） （µm） （µm） （g）
CN-10 6∼10 0.5 5 2 2 70
CN-18 10∼18.5 0.6 5 2 2 85

44
 Bore Gauge & Micro-hole Test

Parts
Interchangeable Rods (Anvils), Washers and Extension Rods (For CD & CN type)
Extension Interchangeable rods (anvils) Washers
Model rods
No.1 No.2 No.3 No.4 No.5 No.6 No.7 No.8 No.9 No.10 No.11 No.12 No.13 0.5mm 1mm 2mm 3mm 4mm 5mm 6mm
NML 6 6.5 7 7.5 8 8.5 9 9.5 10
CN-10
Code No. ZJ-300 ZJ-301 ZJ-302 ZJ-303 ZJ-304 ZJ-305 ZJ-306 ZJ-307 ZJ-308
NML 10 11 12 13 14 15 16 17 18
CN-18 ZJ-343
Code No. ZJ-310 ZJ-311 ZJ-312 ZJ-313 ZJ-314 ZJ-315 ZJ-316 ZJ-317 ZJ-318
CD-35 NML 18 20 22 24 26 28 30 32 34
ZJ-382 ZJ-383
CD-35S Code No. ZJ-350 ZJ-351 ZJ-352 ZJ-353 ZJ-354 ZJ-355 ZJ-356 ZJ-357 ZJ-358
CD-60 NML 35 40 45 50 55 60
CD-60S Code No. ZJ-360 ZJ-361 ZJ-362 ZJ-363 ZJ-364 ZJ-365
NML 50 55 60 65 70 75 80 85 90 95 100
CD-150 Code No. ZJ-360 ZJ-361 ZJ-362 ZJ-363 ZJ-364 ZJ-365 ZJ-366 ZJ-367 ZJ-368 ZJ-369 ZJ-370
ZJ-384 ZJ-385 ZJ-386 ZJ-387
CD-150S NML 50 100 105 110 115 120 125 130 135 140 145 150
Code No. ZJ-379 ZJ-360 ZJ-361 ZJ-362 ZJ-363 ZJ-364 ZJ-365 ZJ-366 ZJ-367 ZJ-368 ZJ-369 ZJ-370
CD-160 NML 100 105 110 115 120 125 130 135 140 145 150 155 160
CD-160S Code No. ZJ-360 ZJ-361 ZJ-362 ZJ-363 ZJ-364 ZJ-365 ZJ-366 ZJ-367 ZJ-368 ZJ-369 ZJ-370 ZJ-371 ZJ-372
CD-250 NML 160 175 190 205 220 235
CD-250S Code No. ZJ-37３ ZJ-374 ZJ-375 ZJ-376 ZJ-377 ZJ-378
NML 250 265 280 295 310
ZJ-388 ZJ-389 ZJ-390 ZJ-391 ZJ-392 ZJ-393 ZJ-394
CD-400 Code No. ZJ-37３ ZJ-374 ZJ-375 ZJ-376 ZJ-377
CD-400S NML 75 325 340 355 370 385
Code No. ZJ-380 ZJ-37３ ZJ-374 ZJ-375 ZJ-376 ZJ-377
NML 15 16 17 18 19 20 21 22 23 24 25
CD-35F Code No. ZJ-319 ZJ-320 ZJ-321 ZJ-322 ZJ-323 ZJ-324 ZJ-325 ZJ-326 ZJ-327 ZJ-328 ZJ-329
ZJ-344
CD-35FS NML 10mm （25） 26 27 28 29 30 31 32 33 34 35
Code No. ZJ-341 （ZJ-319） ZJ-320 ZJ-321 ZJ-322 ZJ-323 ZJ-324 ZJ-325 ZJ-326 ZJ-327 ZJ-328 ZJ-329
CD-60F NML 35 40 45 50 55 60
CD-60FS Code No. ZJ-330 ZJ-331 ZJ-332 ZJ-333 ZJ-334 ZJ-335
NML 50 55 60 65 70 75 80 85 90 95 100
ZJ-344 ZJ-345 ZJ-346 ZJ-347
CD-150F Code No. ZJ-330 ZJ-331 ZJ-332 ZJ-333 ZJ-334 ZJ-335 ZJ-336 ZJ-337 ZJ-338 ZJ-339 ZJ-340
CD-150FS NML 50 （100） 105 110 115 120 125 130 135 140 145 150
Code No. ZJ-342 （ZJ-330） ZJ-331 ZJ-332 ZJ-333 ZJ-334 ZJ-335 ZJ-336 ZJ-337 ZJ-338 ZJ-339 ZJ-340

Extension Sleeves Dial Gauge Protection Cover Parts Names

CD-35 CD-60∼ CD-250∼ (ZY-094)
Length (mm) ①
CD-35F∼CD-150F  CD-160  CD-400
125 ZJ-400 ZJ-403 ZJ-408 ②
250 ZJ-401 ZJ-404 ZJ-409
⑧
500 ZJ-402 ZJ-405 ZJ-410
③ ①Dial Clamp
750 − ZJ-406 ZJ-411 ⑥
②Dial Holder
1000 − ZJ-407 ZJ-412
③Grip
Extension sleeve dia. (mm) φ8.7 φ12 φ15 ④ ⑦ ④Sleeve
Spanner ZZ-018 ZZ-019 ⑤Head
Can not be used for CN-10, 18, 35F, 60F, 150F.
⑧ ⑥Contact Point
⑤ ⑥ (Movable Side)
In case that deep holes are
extension sleeve ⑦Guide
measured which can not be
⑦ ⑧Anvil
measured with standard
Dial indicator protection cover (ZY-094).
bore gauges, measuring
Protection cover for bore gauge.
depth is to be extended by
It can not be used for CC type.
extension rod outer cylinder.

Washer

Extension Rods and

As error may occur due to deflection,
only 1 extension rod should be adopted.
Anvil
Washer Set
Code No. Model
ZJ-918 CN-10
ZJ-919 CN-18
ZJ-920 CN-35F Supporting Nut
Extension Rods
ZJ-921 CN-60F (Anvil Nut)
ZJ-922 CN-150Ｆ
ZJ-923 CD-35
ZJ-924 CD-60
ZJ-925 CD-150 Can also be used to
ZJ-926 CD-160 CN type of old poducts.
ZJ-927 CD-250
ZJ-928 CD-400

45
 Micro-Hole test
This is designed for measuring diameter of small holes exclusively and can measure diameters from minimum φ1.7mm to maximum φ10mm.
When the edge of probe is inserted to a small hole, the edge is closed to inside and presses inner driving rod upward. The principle is that
movement is transferred to the extension rod and instructs to dial indicator. Swing width of dial graduation is read as well as bore gauge. It is
marked characteristic that stability accuracy indicating performance is high as 2μm.

Micro-Hole test
• It can comply with measuring internal diameter from minimum φ1.7mm to maximum φ10mm.
• It has realized stability accuracy 2μm, even though it is applied for small internal diameter which is difficult to measure.
• It realizes smooth operation with hard chrome plating. It can be naturally inserted to small internal diameter and obtain stable indication value.

[Full Choice] Micro-Hole Test

Series to select only the measuring range is needed.
Dimensions Model Order number Measuring Range (mm) Probe Driving Rod
MT-3N 1.7 1.7∼2.1 012 1
MT-3N 2.1 2.1∼2.4 013 1
MT-3N
20
MT-3N 2.3 2.3∼2.7 014 2
MT-3N 2.7 2.7∼3.2 015 2
MT-4N 2.7 2.7∼3.2 015 2
φ16 MT-4N 3.1 3.1∼3.5 016 2
76

MT-4N
MT-10N MT-4N 3.4 3.4∼3.8 017 2
50

Measuring Range 6~10mm MT-4N 3.8 3.8∼4.3 018 2

MT-6N 3.8 3.8∼4.3 018 2
MT-6N 4.2 4.2∼5.0 021 3
MT-6N
MT-6N 4.7 4.7∼5.5 022 3
M6×Ｐ0.75
M6×Ｐ0.75 MT-6N 5.3 5.3∼6.2 023 3
MT-10N 6.0 6.0∼6.8 024 3
(Depth of measurement)

MT-10N 6.6 6.6∼7.5 025 3

MT-10N 7.3 7.3∼8.1 026 3
A

MT-10N
B

MT-10N 8.0 8.0∼8.8 027 3

MT-10N 8.5 8.5∼9.4 028 3
MT-10N 9.2 9.2∼10.0 029 3
C

unit：mm
Product configuration=Probe+Diving rod + Holder + Extension rods + Spanner (Dialgauge options)

Specification
Probe Accessories
Measuring Range Probe Dimensions (mm) Indication Error Repeatability
Model Number of No. Measuring Range (mm) Weight (g)
(mm) A B C Driving Rod Extension Rods Spanner (μm) (μm)
Probe
012 1.70∼2.10
25.3 17 0.9 Driving Rod1
013 2.10∼2.40
MT-3N 1.7∼3.2 4 014 2.30∼2.70 1 1 8 2 100
30.6 22 1.2
015 2.70∼3.20
015 2.70∼3.20
016 3.10∼3.50 30.6 22 1.2 Driving Rod2
MT-4N 2.7∼4.3 4 017 3.40∼3.80 1 1 8 2 100
018 3.80∼4.30 30.6 22 2.0
018 3.80∼4.30 30.6 22
021 4.20∼5.00
MT-6N 3.8∼6.2 4 2.0 1 1 8 2 100
022 4.70∼5.50 47.3 40
023 5.30∼6.20
024 6.00∼6.80
025 6.60∼7.50
40 Driving Rod3
026 7.30∼8.10
MT-10N 6.0∼10.0 6 47.3 2.0 1 1 8 2 100
027 8.00∼8.80
028 8.50∼9.40
50
029 9.20∼10.00

Technical Data
• Dial indicator can be installed to bore gauges and Micro-hole Test. It is selectable for easier reading in compliance with objective and dimension
range.

Measuring purpose Measuring purpose

 Graduation 0.001mm  Graduation 0.001mm Measuring purpose
Applicable Models Continuous Dial  Graduation 0.001mm
 TM-1201f Applicable Models One Revolution Dial Indicator
 （Measuring Range 1mm）  TM-1251f Applicable Models
 TM-1202f  （Measuring Range 1mm）  TM-1200f
 （Measuring Range 2mm）  （Measuring Range 0.16mm）

Measuring purpose
Measuring purpose Measuring purpose  Small Dial Indicators
 Graduation 0.01mm  Graduation 0.01mm Applicable Models
Applicable Models  One Revolution Dial Indicator  TM-36f
（Graduation
    ）
 TM-105 Applicable Models 0.005mm
Measuring Range 3.5mm
 （Measuring Range 5mm）  TM-102f
 （Measuring Range 1mm）  TM-37C
（Graduation
    ）
Measuring
0.01mm
Range 3.5mm

As to dial indicator installed to bore gauge, dial indicator with flat back is recommended. Lug back is standard for ordinary dial
indicators but it will be with flat back by adding suffix "f" to the end of model name. TM-105 and TM-37C dial indicator is
supplied with Flat back as standard.

46