We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.
7V 250mAh Rechargeable in
stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.
00000005981LF-000
MC33772BTP1AE
EOS Power
NXP SEMICONDUCTORS
Buy Now
Buy Now
Looking for a discount?
Check out our current promotions!
Give us a call
1-855-837-4225 1-415-281-3866
International: 1-415-281-3866
1-555-555-5555
Arrow
Arrow Electronics,
Electronics, Inc
Verical Division
9201 East Dry Creek Road
P.O. Box 740970
Centennial,
Los Angeles, CO 80112
CA 90074-0970
This coversheet was created by Verical, a division of Arrow Electronics, Inc. (“Verical”). The attached document was created by the part supplier,
not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, affiliates, employees, and agents make no representations or warranties
regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,
product names, service names, and trademarks are the property of their respective owners.
Robust, reliable
analog solutions
MC33772 and MC33664 Battery Cell
Controller and Transformer Physical Layer
The MC33772 battery six-cell controller and MC33664 transformer physical layer
solutions enable reliable, safe and bill of materials (BOM) optimized Li-ion cell
control applications with low-cost, robust, high-speed isolated communication.
TARGET APPLICATIONS With functional verification and diagnostics, the MC33772
and MC33664 support ISO 26262 SafeAssure® functional
Automotive Applications
safety. Functional verification of cell measure, current
}} High-voltage battery management systems (200 V– +800 V)
measure, cell terminal openings or leakage and ADC
}} 14 V Li-ion battery management systems precision checks are all performed.
Industrial Applications
FEATURES
}} Energy storage systems (ESS)
}} 5.0 V (7.0 V for TPL) < VPWR < 30 V operation, 42 V transient
}} Uninterrupted power supply (UPS) for TPL communication
}} E-bikes, e-scooters }} Isolated 2 Mbps differential communication or 4 Mbps SPI
This solution addresses all existing battery management }} Up to six cell voltage (differential) measurements and stack
system topologies that support centralized, distributed voltage measurements
daisy chain as well as high-speed and robust daisy chain. }} Synchronized cell voltage/current measurement with
It is compatible with 14 V Li-ion batteries with one analog coulomb counting
front end (AFE) and optional high-speed isolated or SPI }} Seven ADC/GPIO/temperature sensor inputs
communications. These fully integrated battery monitoring
}} Addressable on initialization
devices are for automotive and industrial mission-critical
}} Onboard 300 mA passive cell balancing low ohmic
applications.
MOSFETS with diagnostics
High-speed and robust daisy chain is used as an alternative }} Designed to support ISO 26262, up to ASIL D safety
to CAN solutions. Fast data acquisition and communication capability
to the pack controller can be achieved in only 0.86 ms for }} Low-power modes
the pack controller to acquire conversions from six cells,
}} 48-pin LQFP package
seven external temperatures, the current and coulomb
counter. The MC33772 controller can work down to three
cells and up to six cells. Also, determination of individual
cell impedances in one shot is synchronized for cell
voltages and current measurements at 113 µs.
EXAMPLE: TYPICAL 14 V BATTERY MANAGEMENT MC33772 AND MC33664 HIGH-VOLTAGE BATTERY
SYSTEM CHIPSET FOR SPI COMMUNICATION MANAGEMENT SYSTEM FOR TPL COMMUNICATION
MC33772 AND MC33664 BLOCK DIAGRAM
MC33772
VPWR1
RDTX_OUT+
MC33772 VPWR2 RDTX_OUT-
VCOM
VPWR1 RDTX _OUT+ CT6 VCOM
RDTX_OUT-
VPWR2 VCOM CB6
CGND Battery
CB6.5_C Reference
CT6 VCOM VANA
CT5 AGND Battery
Reference
CB6 DGND
CGND Battery Fault
CB6:5_C 6 Cell
Reference CTn
VPRE Voltage SDA
CBn
CT5 Messure SDL
VANA SC
CSE Battery
AGND Battery CT1 SPI_COM_EN Reference
CTn DGND Reference CBB2:1_C RESET T1
6 Cell SIRDTX_IN+ 1:1
FAULT CB1
Voltage CBn
SDA
MCU CTref SCLKNDTX_IN-
Measure SDL EEPROM VCOM
SPI_COM_EN ISENSE+
VPRE GPIO0
CT1
VCP GPIO1
CB2:1_C GNDCP GPIO2
RESET GPIOx ISENSE- GPIO3
CB1 GPIO4
CSB CSB GNDREF
Battery GPIO5
CTREF SO MISO Reference GNDFLG
GPIO6
SI/RDTX _IN+ MOSI
ISENSE+ Battery
SCLK/RDTX _IN- SCLK MC33772 Reference
VPWR1
Current VCOM RDTX_OUT+
Measure GPIO0 VPWR2 RDTX_OUT-
GPIO1 VCOM
ISENSE- GPIO2 CT6 VCOM
GPIO3 CB6 Battery Pack Controller
CGND Battery
GPIO4 CB6.5_C Reference
GNDSUB VANA
Battery GPIO5 CT5 AGND Battery
GNDFLG Reference
Reference GPIO6 DGND
Battery 6 Cell CTn Fault
Voltage CBn SDA
Reference Messure SDL
SC MCU
CSE Battery
CT1 Reference
SPI_COM_EN T1
CBB2:1_C T1
RESET 1:1 1:1
SIRDTX_IN+ SPI1
CB1
CTref MC33664
SCLKNDTX_IN- SPI2
ISENSE+ VCOM
GPIO0
Cell GPIO1
Current GPIO2
Messure
GPIO3
ISENSE+ GPIO4
GNDREF GPIO5
Battery GNDFLG GPIO6
Reference
Battery
Reference
DEVELOPMENT TOOLS
Kit Number Description
FRDM33772BSPIEVB (SPI mode) MC33772 evaluation board
FRDM33772BTPLEVB (TPL mode) MC33772 evaluation board
FRDM33664BEVB (TPL mode) MC33664 evaluation board
MC33772 AND MC33664 PRODUCT DIFFERENTIATION
Features Benefits
Integrated current channel and coulomb counting Reduces BOM for 14 V Li-ion battery applications (only one AFE required)
Integrated current channel synchronized with cell
Determination of individual cell impedances in one shot for improved SoC/SoH prediction
voltage measurements
Addresses all existing battery management system topologies (centralized, distributed daisy chain,
Optional high-speed isolated or SPI communication
distributed CAN)
High-speed (2 Mbit/s) isolated high-speed Allows BOM cost reduction by transition from CAN to daisy chain without compromise on
differential communication communication speed
Fast data acquisition and communication to
Significant improvement of battery diagnostics
pack controller
Hot plug and random cell connection robustness No pre-damaging of cell and no damaging of devices during customer battery/electronics assembly
ESD/EMC robustness avoids external components for robustness protection (BOM reduction, board
ESD/EMC robustness
space reduction)
Supports ISO 26262 SafeAssure® functional safety
Has functional verification and diagnostics
with single package solution
PRODUCT LONGEVITY PROGRAM
These products are/or may be supported by NXP®’s Product Longevity Program. For terms and
conditions and to obtain a list of available products, visit www.nxp.com/ProductLongevity.
www.nxp.com/battery
NXP, the NXP logo and SafeAssure are trademarks of NXP B.V. All other product or service names are the property of their
respective owners. © 2015–2018 NXP B.V.
Document Number: MC33772FSA4 REV 4
