Scribd
Upload
463 views4 pages

DM32 Manometer Quick Guide

This document provides instructions for using a DM32 Dual-Channel Digital manometer. It allows the user to: 1. Connect pressure tubes and power on the device. 2. Select the device type and pressure range. 3. Choose the measurement result to display such as pressure difference or airflow. 4. Set the area or volume for calculations like air changes per hour. The device can measure pressure on two channels, store a baseline pressure, average readings over time, and connect to other devices on a local network.

Uploaded by

Jose Garcia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
463 views4 pages

DM32 Manometer Quick Guide

This document provides instructions for using a DM32 Dual-Channel Digital manometer. It allows the user to: 1. Connect pressure tubes and power on the device. 2. Select the device type and pressure range. 3. Choose the measurement result to display such as pressure difference or airflow. 4. Set the area or volume for calculations like air changes per hour. The device can measure pressure on two channels, store a baseline pressure, average readings over time, and connect to other devices on a local network.

Uploaded by

Jose Garcia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

QuickGuide: DM32 Dual-Channel Digital manometer

Tap in the boxes on


the touch sensitive
Home screen

Control fan speed

[Channel A]
pressure difference
Fan speed, time average, across blue “input” and
network and battery red “ref” ports
status

Baseline being subtracted

[Channel B]
Select Device and Range
….across green “input”
and yellow “ref” ports
Set to any pressure

Dimensions eliminate
calculations
On/Off and Home

On for charging,
off when charged

Recharge using micro-


USB to USB cable

Computer connection
with Ethernet cable
Get latest updates online
1: Make connections and power On

Plug in color-
coded tubes

Connect ethernet-style Press for 2 seconds


Cable from gauge to fan to turn On /Off

2: Set Range or Device


Tap Tap
to select Device to select Range

Tap for options

OR Tap for more choices


Tap a Range to select Tap [Change Device]
and return Home to see options Tap to return Home

3: Choose desired Result


Tap [Channel B] Tap to select Result Tap to change units

Tap

for previous screen Tap for more

Page 2 of 4
4: Set Area and Volume

Tap and [Set] area for:

Flow/Area
EqLA10/Area
EfLA4/Area

Tap and [Set] volume for:

ACH (Air Changes per Hour)

5: Run a test

Tap to target a pressure

OR

Tap to set to a speed

a Tap to “Hold”,
Tap to release
d Tap

b Tap to change Result


Tap to calculate Result
d exactly at (@) the “Set
Pressure”
a
c Tap or
to decrease or increase
b

c e c

Tap
e Tap to turn fan Off

to remove @

Page 3 of 4
Change gauge Settings
Tap [Settings] allows you to change:

[Baseline]: Measure and remove Bias/Baseline pressures.

Tap [Capture Baseline] to begin sampling


Tap [End Capture] after 15 to 60 seconds
The displayed Baseline pressure is subtracted from all
future [Channel A] readings.
Tap [Settings]>>[Baseline] >>[Clear Baseline] to
remove.

[Area]
[Volume]
[Time Averaging]
[Result to be displayed]

[Network] Shows connection information.


[Default @ Pressure] Adjust the pressure to which results
are extrapolated.
[Power down time] Enter time, “Off” means never.
[Sound] On or off.
[Ducts=0.6, House=0.65] Enter “n” for ducts or house.

[Firmware]: View current version or initiate update process.


[Re-calibrate touchscreen] Adjust the sensitivity.
Tap OR

to return to Home

Connect many gauges to a computer

Tap

Tap …
Tap [Network]

Tap [Status] and


select “Wired “

If connecting to Switch or PC, OR


tap [Mode] and select “Static “.
For 2nd gauge enter IP Address: 169.254.1.2
If connecting to a Router just
For 3rd gauge enter IP Address: 169.254.1.3 tap [Mode] and select “DHCP “
……
Page 4 of 4

You might also like