Better Air Dispersion

The following images reveal airflow patterns of two “fabric” faced D-Fusers and two industry standard “metal” faced
diffusers. Each of the diffusers were tested at 750 CFM and yielded the airflow patterns as shown in both the end (24"
width) and side (48" length) view.

Fabric: MetalPan D-Fuser Metal: Radial Flow Diffusers

24"
48"

End View

Surround Flow Select Flow Flat Face - Radial Flow Radial Face - Radial Flow

24"
48"

Side View

S E S E

Fabric provides Metal diffusers

u x u x
p h p h
p a p a
l u l u
y s y s

uniform, low velocity use turbulent airflow to

t t

airflow patterns that create radial airflow

have little or no patterns that may reduce
Escape*

turbulence. In many hood capture rates and

critical environments, possibly cause hood
this may enhance Fume
Hood
Fume
Hood
failure.
hood performance. DuctSox products have been accepted within key
industry organizations such as ASHRAE, Under-
writers Laboratories (US & Canada), International
Code Council, and by many building code authori-
Air Flow Models ties throughout the world.

Surround FlowTM Select FlowTM More than evolving our standard products,
DuctSox strives to be the leader in the industry
Surround Flow is the standard air flow model Select Flow combines through our commitment to quality, service, and
for all D-Fuser models. The radial shape of the customized vent innovation.
fabric face produces a uniform and radially patterns to include
diverging air pattern. Even with high volumes, directional airflow 1 WAY:
To better support our Global Distribution Network,
D-Fusers deliver less turbulence and lower control. 2 WAY: we have expanded our production capabilities to
noise than conventional metal D-Fusers. Kunshan, China and Guadalajara, Mexico.
3 WAY: Air Dispersion Solutions for
4 WAY: Airflow Sensitive
Critical Environments

Reduced Noise Noise Criteria Comparison

Common Metal vs. D-Fuser


9866 Kapp Court, Peosta, IA 52068
Ph: 563-588-5300 • Toll Free: 866-382-8769 • Fax: 563-588-5330
Fabric faced products offer noise levels at least 10NC quieter
than metal. www.ductsox.com

The combination of perforated metal panels and louvers result in

significantly higher noise criteria (NC) ratings than fabric faced LabSox products are constructed of Rx or DT fabrics which are classified
D-Fuser products. The chart reveals NC levels for an industry by Underwriters Laboratories as an air distribution device in accordance
standard metal diffuser and a D-Fuser at varying air volumes with the requirements of NFPA 90A. Rx25 and Rx50 are also classified
in accordance with ICC Evaluation Service AC167 and UL2518.
(500 CFM, 750 CFM, and 1000 CFM).
Products may be covered by one or more of the following patents: 6565430, 6558250, 5769708, 6425417, 6626754,
Traditional shaped products can be custom configured for quiet DSLSB0315A
6280320, 6960130, 6958011, 6953396, 8434526, 8676545, 8808075, and 8844578. Other patents pending.
air delivery. © 2015 DuctSox Corp.
A Subsidiary of Rite-Hite Holding Corporation
 LabSox Products are Textile Air Dispersion Devices
TM

designed for laboratory environments (vivariums, pharmaceutical, research MetalPan TM

All-Fabric TM

education, etc.) in critical applications commonly associated with a fume The MetalPan LabSox combines the traditional metal backpan with the unique advantages of a fabric face for improved airflow perfor- The All-Fabric LabSox product features an innovative snap frame aluminum extrusion which secures the fabric
hood or other airflow sensitive equipment (scales, laser, microscope, etc). mance using an industry standard installation method. The construction features a metal backpan with snap frame and fabric face. The assembly in place and allows it to be easily removed for maintenance. With this product, the only ceiling penetration
LabSox are also applicable to industrial or commercial kitchen applications. shallow 6-inch depth of the face provides a low profile dispersion panel, yet delivers excellent performance. required is for the inlet connection. The slightly larger and deeper 9-inch face profile of the All-Fabric model increases
Airflow in laboratories is a critical design factor as turbulent air can nega- internal mixing volume and decreases average discharge velocity.
tively affect research or even cause hood failure resulting in a compliancy
issue. The LabSox advantage is clear as air passes through specialized
fabric panels resulting in uniform, low velocity, radially diverging air patterns
with little, if any, turbulence.
LabSox products are not only ideal for labs of the future, but can be easily
retrofitted to resolve air flow issues in existing facilities.

Applying Fabric
To be flexible for optimum design, LabSox solutions are available in a wide variety of products ranging from the D-Fuser style 24" x 24" MetalPan D-Fuser, Snap Frame
MetalPlan or All-Fabric to traditional product configurations. With all of these options, the fabric is removable, simplifying 24" x 48" All-Fabric D-Fuser,
installation and maintenance. Snap Frame
24" x 48" MetalPan D-Fuser, Snap Frame
Features:
  Industry standard 24" x 96" All-Fabric D-Fuser,
Snap Frame released and Snap Frame Snap Frame Snap Frame
configuration (open) (closed)
  Simple, snap frame face removed, reveals Fabric Inlet Connection
rigid diffusion panel
installation
  Interchangeable fabric face
  Our standard backpan Features:
contains over 55% recycled Inlet Collar (rigid) MetalPanTM D-Fuser All-FabricTM D-Fuser Fabric Inlet Collar   Lower discharge velocity
content 10” or 12” dia., per size, or custom 16” dia. standard, zips   Simple, snap frame
  Lightweight (10 lbs lighter than Metal Backpan Offers Short 6" 35% More Surface Area Yields to fabric assembly, seals installation
metal for 24" x 48") Metal Backpan Face Depth and Easy Installation Lower Average Discharge Velocities to rigid supply duct.   Universal installation
  Shallow 6" face depth and Rigid metal pan includes diffusion
configurations (T-bar or
MetalPanTM All-FabricTM Half Round Quarter Round Cylindrical panel and mounting rail or snap Snap Frame
tapered ends frame mechanism for attaching 12" Dia. Inlet finished ceiling)
Easily removed fabric Easily removed fabric For finished ceiling, For finished ceiling/ For open or high   Capable of airflow volumes 16" Dia. Inlet Aluminum frame   Lightweight shipping
fabric face. Available in steel or secures fabric assembly
face for Snap Frame or face for Snap Frame or larger dispersion panel wall location, larger ceiling applications, up to 1,000 CFM (24" x 48") aluminum (baked enamel) or   Increased airflow
Clip Face options. Clip Face options. for higher volume. dispersion panel for system acts as to T-bar on finished
stainless steel (mill). Also available
ceiling. Hook and volume per unit
Sizes include: Sizes include: Airflow enters from top higher volume. Airflow duct and diffuser.   Easy maintenance
24x24 ≤ 500 CFM 24x24 ≤ 500 CFM or end. Customized enters from top, back Customized per Options: with filter rail (for gel seal: 9” deep
pan) or insulation.
loop fastener eases
  Quiet
  Size 24” x 24”, 24” x 48” alignment.
24x48 ≤ 1,000 CFM 24x48 ≤ 1,000 CFM per application. or end. Customized application. 6” 6”
24x96 ≤ 2,000 CFM per application.   Optional Select Flow Fabric Face 6” to 9” 6” to 9”

  Inlet diameter Highly permeable fire retardant Diffusion Fabric Assembly Options:
  Filtration fabric dispersion panel that Diffusion Includes a non-porous
Panel fabric backpanel, a   Standard 24” x 24”,
  Insulated backpan quickly mounts to the snap frame Panel
assembly. Fabric face is fully flexible diffusion panel, 24” x 48”, 24” x 96”
  Backpan construction (steel, and a fabric face. (custom sizes available)
launderable and available in either
aluminum, or stainless steel) Surround Flow (standard) or Select Added depth and size   Surround Flow (std.) or
Flow dispersion options. The increases dispersion Select Flow
*Patent Pending fabric face construction varies by area, improving airflow   Custom inlet size and
and discharge velocity.
Fabric Options
attachment type.
position
*Patent Pending

Rx fabrics feature an antimicrobial DT fabrics offer a silver color choice

treated, air permeable woven fabric.
A complement of high permeable
in a low maintenance, micro-
perforated polyester fabric. DT is a Clip Face Option Clip
Clip Retrofit Option
fabrics woven only with filament threads stronger and more durable fabric Developed as a budget-friendly alternative, the Clip Face allows the fabric To address airflow issues in existing facilities, retrofit
avoiding risk of shedding. All Rx fabrics choice for challenging (high wear) or face to affix directly to the metal backpan. While providing the same options are available to mount to existing diffusers or
are made with 50% post-industrial recycled industrial applications. Open outlets premium air dispersion characteristics, sewn-in clips on the fabric face directly to existing ductwork.
content and include a durable anti-microbial minimize filtering and extend periods easily attach to the mounting rail on the backpan. This simpler design
treatment. The lightweight fabric can be easily between maintenance. eliminates the snap frame. Besides airflow, these units can also be used to
cleaned and offers secondary filtration for minimize airborne particles emitted from aging systems
make up air. The standard model is steel with a baked enamel finish. Other options with lined ductwork.
include coated aluminum or stainless steel.
T-Bar Ceiling
Better Air Dispersion
The following images reveal airflow patterns of two “fabric” faced D-Fusers and two industry standard “metal” faced
diffusers. Each of the diffusers were tested at 750 CFM and yielded the airflow patterns as shown in both the end (24"
width) and side (48" length) view.

Fabric: MetalPan D-Fuser Metal: Radial Flow Diffusers

24"
48"

End View

Surround Flow Select Flow Flat Face - Radial Flow Radial Face - Radial Flow

24"
48"

Side View

S E S E

Fabric provides Metal diffusers

u x u x
p h p h
p a p a
l u l u
y s y s

uniform, low velocity use turbulent airflow to

t t

airflow patterns that create radial airflow

have little or no patterns that may reduce
Escape*

turbulence. In many hood capture rates and

critical environments, possibly cause hood
this may enhance Fume
Hood
Fume
Hood
failure.
hood performance. DuctSox products have been accepted within key
industry organizations such as ASHRAE, Under-
writers Laboratories (US & Canada), International
Code Council, and by many building code authori-
Air Flow Models ties throughout the world.

Surround FlowTM Select FlowTM More than evolving our standard products,
DuctSox strives to be the leader in the industry
Surround Flow is the standard air flow model Select Flow combines through our commitment to quality, service, and
for all D-Fuser models. The radial shape of the customized vent innovation.
fabric face produces a uniform and radially patterns to include
diverging air pattern. Even with high volumes, directional airflow 1 WAY:
To better support our Global Distribution Network,
D-Fusers deliver less turbulence and lower control. 2 WAY: we have expanded our production capabilities to
noise than conventional metal D-Fusers. Kunshan, China and Guadalajara, Mexico.
3 WAY: Air Dispersion Solutions for
4 WAY: Airflow Sensitive
Critical Environments

Reduced Noise Noise Criteria Comparison

Common Metal vs. D-Fuser


9866 Kapp Court, Peosta, IA 52068
Ph: 563-588-5300 • Toll Free: 866-382-8769 • Fax: 563-588-5330
Fabric faced products offer noise levels at least 10NC quieter
than metal. www.ductsox.com

The combination of perforated metal panels and louvers result in

significantly higher noise criteria (NC) ratings than fabric faced LabSox products are constructed of Rx or DT fabrics which are classified
D-Fuser products. The chart reveals NC levels for an industry by Underwriters Laboratories as an air distribution device in accordance
standard metal diffuser and a D-Fuser at varying air volumes with the requirements of NFPA 90A. Rx25 and Rx50 are also classified
in accordance with ICC Evaluation Service AC167 and UL2518.
(500 CFM, 750 CFM, and 1000 CFM).
Products may be covered by one or more of the following patents: 6565430, 6558250, 5769708, 6425417, 6626754,
Traditional shaped products can be custom configured for quiet DSLSB0315A
6280320, 6960130, 6958011, 6953396, 8434526, 8676545, 8808075, and 8844578. Other patents pending.
air delivery. © 2015 DuctSox Corp.
A Subsidiary of Rite-Hite Holding Corporation
 LabSox Products are Textile Air Dispersion Devices
TM

designed for laboratory environments (vivariums, pharmaceutical, research MetalPan TM

All-Fabric TM

education, etc.) in critical applications commonly associated with a fume The MetalPan LabSox combines the traditional metal backpan with the unique advantages of a fabric face for improved airflow perfor- The All-Fabric LabSox product features an innovative snap frame aluminum extrusion which secures the fabric
hood or other airflow sensitive equipment (scales, laser, microscope, etc). mance using an industry standard installation method. The construction features a metal backpan with snap frame and fabric face. The assembly in place and allows it to be easily removed for maintenance. With this product, the only ceiling penetration
LabSox are also applicable to industrial or commercial kitchen applications. shallow 6-inch depth of the face provides a low profile dispersion panel, yet delivers excellent performance. required is for the inlet connection. The slightly larger and deeper 9-inch face profile of the All-Fabric model increases
Airflow in laboratories is a critical design factor as turbulent air can nega- internal mixing volume and decreases average discharge velocity.
tively affect research or even cause hood failure resulting in a compliancy
issue. The LabSox advantage is clear as air passes through specialized
fabric panels resulting in uniform, low velocity, radially diverging air patterns
with little, if any, turbulence.
LabSox products are not only ideal for labs of the future, but can be easily
retrofitted to resolve air flow issues in existing facilities.

Applying Fabric
To be flexible for optimum design, LabSox solutions are available in a wide variety of products ranging from the D-Fuser style 24" x 24" MetalPan D-Fuser, Snap Frame
MetalPlan or All-Fabric to traditional product configurations. With all of these options, the fabric is removable, simplifying 24" x 48" All-Fabric D-Fuser,
installation and maintenance. Snap Frame
24" x 48" MetalPan D-Fuser, Snap Frame
Features:
  Industry standard 24" x 96" All-Fabric D-Fuser,
Snap Frame released and Snap Frame Snap Frame Snap Frame
configuration (open) (closed)
  Simple, snap frame face removed, reveals Fabric Inlet Connection
rigid diffusion panel
installation
  Interchangeable fabric face
  Our standard backpan Features:
contains over 55% recycled Inlet Collar (rigid) MetalPanTM D-Fuser All-FabricTM D-Fuser Fabric Inlet Collar   Lower discharge velocity
content 10” or 12” dia., per size, or custom 16” dia. standard, zips   Simple, snap frame
  Lightweight (10 lbs lighter than Metal Backpan Offers Short 6" 35% More Surface Area Yields to fabric assembly, seals installation
metal for 24" x 48") Metal Backpan Face Depth and Easy Installation Lower Average Discharge Velocities to rigid supply duct.   Universal installation
  Shallow 6" face depth and Rigid metal pan includes diffusion
configurations (T-bar or
MetalPanTM All-FabricTM Half Round Quarter Round Cylindrical panel and mounting rail or snap Snap Frame
tapered ends frame mechanism for attaching 12" Dia. Inlet finished ceiling)
Easily removed fabric Easily removed fabric For finished ceiling, For finished ceiling/ For open or high   Capable of airflow volumes 16" Dia. Inlet Aluminum frame   Lightweight shipping
fabric face. Available in steel or secures fabric assembly
face for Snap Frame or face for Snap Frame or larger dispersion panel wall location, larger ceiling applications, up to 1,000 CFM (24" x 48") aluminum (baked enamel) or   Increased airflow
Clip Face options. Clip Face options. for higher volume. dispersion panel for system acts as to T-bar on finished
stainless steel (mill). Also available
ceiling. Hook and volume per unit
Sizes include: Sizes include: Airflow enters from top higher volume. Airflow duct and diffuser.   Easy maintenance
24x24 ≤ 500 CFM 24x24 ≤ 500 CFM or end. Customized enters from top, back Customized per Options: with filter rail (for gel seal: 9” deep
pan) or insulation.
loop fastener eases
  Quiet
  Size 24” x 24”, 24” x 48” alignment.
24x48 ≤ 1,000 CFM 24x48 ≤ 1,000 CFM per application. or end. Customized application. 6” 6”
24x96 ≤ 2,000 CFM per application.   Optional Select Flow Fabric Face 6” to 9” 6” to 9”

  Inlet diameter Highly permeable fire retardant Diffusion Fabric Assembly Options:
  Filtration fabric dispersion panel that Diffusion Includes a non-porous
Panel fabric backpanel, a   Standard 24” x 24”,
  Insulated backpan quickly mounts to the snap frame Panel
assembly. Fabric face is fully flexible diffusion panel, 24” x 48”, 24” x 96”
  Backpan construction (steel, and a fabric face. (custom sizes available)
launderable and available in either
aluminum, or stainless steel) Surround Flow (standard) or Select Added depth and size   Surround Flow (std.) or
Flow dispersion options. The increases dispersion Select Flow
*Patent Pending fabric face construction varies by area, improving airflow   Custom inlet size and
and discharge velocity.
Fabric Options
attachment type.
position
*Patent Pending

Rx fabrics feature an antimicrobial DT fabrics offer a silver color choice

treated, air permeable woven fabric.
A complement of high permeable
in a low maintenance, micro-
perforated polyester fabric. DT is a Clip Face Option Clip
Clip Retrofit Option
fabrics woven only with filament threads stronger and more durable fabric Developed as a budget-friendly alternative, the Clip Face allows the fabric To address airflow issues in existing facilities, retrofit
avoiding risk of shedding. All Rx fabrics choice for challenging (high wear) or face to affix directly to the metal backpan. While providing the same options are available to mount to existing diffusers or
are made with 50% post-industrial recycled industrial applications. Open outlets premium air dispersion characteristics, sewn-in clips on the fabric face directly to existing ductwork.
content and include a durable anti-microbial minimize filtering and extend periods easily attach to the mounting rail on the backpan. This simpler design
treatment. The lightweight fabric can be easily between maintenance. eliminates the snap frame. Besides airflow, these units can also be used to
cleaned and offers secondary filtration for minimize airborne particles emitted from aging systems
make up air. The standard model is steel with a baked enamel finish. Other options with lined ductwork.
include coated aluminum or stainless steel.
T-Bar Ceiling
 LabSox Products are Textile Air Dispersion Devices
TM

designed for laboratory environments (vivariums, pharmaceutical, research MetalPan TM

All-Fabric TM

education, etc.) in critical applications commonly associated with a fume The MetalPan LabSox combines the traditional metal backpan with the unique advantages of a fabric face for improved airflow perfor- The All-Fabric LabSox product features an innovative snap frame aluminum extrusion which secures the fabric
hood or other airflow sensitive equipment (scales, laser, microscope, etc). mance using an industry standard installation method. The construction features a metal backpan with snap frame and fabric face. The assembly in place and allows it to be easily removed for maintenance. With this product, the only ceiling penetration
LabSox are also applicable to industrial or commercial kitchen applications. shallow 6-inch depth of the face provides a low profile dispersion panel, yet delivers excellent performance. required is for the inlet connection. The slightly larger and deeper 9-inch face profile of the All-Fabric model increases
Airflow in laboratories is a critical design factor as turbulent air can nega- internal mixing volume and decreases average discharge velocity.
tively affect research or even cause hood failure resulting in a compliancy
issue. The LabSox advantage is clear as air passes through specialized
fabric panels resulting in uniform, low velocity, radially diverging air patterns
with little, if any, turbulence.
LabSox products are not only ideal for labs of the future, but can be easily
retrofitted to resolve air flow issues in existing facilities.

Applying Fabric
To be flexible for optimum design, LabSox solutions are available in a wide variety of products ranging from the D-Fuser style 24" x 24" MetalPan D-Fuser, Snap Frame
MetalPlan or All-Fabric to traditional product configurations. With all of these options, the fabric is removable, simplifying 24" x 48" All-Fabric D-Fuser,
installation and maintenance. Snap Frame
24" x 48" MetalPan D-Fuser, Snap Frame
Features:
  Industry standard 24" x 96" All-Fabric D-Fuser,
Snap Frame released and Snap Frame Snap Frame Snap Frame
configuration (open) (closed)
  Simple, snap frame face removed, reveals Fabric Inlet Connection
rigid diffusion panel
installation
  Interchangeable fabric face
  Our standard backpan Features:
contains over 55% recycled Inlet Collar (rigid) MetalPanTM D-Fuser All-FabricTM D-Fuser Fabric Inlet Collar   Lower discharge velocity
content 10” or 12” dia., per size, or custom 16” dia. standard, zips   Simple, snap frame
  Lightweight (10 lbs lighter than Metal Backpan Offers Short 6" 35% More Surface Area Yields to fabric assembly, seals installation
metal for 24" x 48") Metal Backpan Face Depth and Easy Installation Lower Average Discharge Velocities to rigid supply duct.   Universal installation
  Shallow 6" face depth and Rigid metal pan includes diffusion
configurations (T-bar or
MetalPanTM All-FabricTM Half Round Quarter Round Cylindrical panel and mounting rail or snap Snap Frame
tapered ends frame mechanism for attaching 12" Dia. Inlet finished ceiling)
Easily removed fabric Easily removed fabric For finished ceiling, For finished ceiling/ For open or high   Capable of airflow volumes 16" Dia. Inlet Aluminum frame   Lightweight shipping
fabric face. Available in steel or secures fabric assembly
face for Snap Frame or face for Snap Frame or larger dispersion panel wall location, larger ceiling applications, up to 1,000 CFM (24" x 48") aluminum (baked enamel) or   Increased airflow
Clip Face options. Clip Face options. for higher volume. dispersion panel for system acts as to T-bar on finished
stainless steel (mill). Also available
ceiling. Hook and volume per unit
Sizes include: Sizes include: Airflow enters from top higher volume. Airflow duct and diffuser.   Easy maintenance
24x24 ≤ 500 CFM 24x24 ≤ 500 CFM or end. Customized enters from top, back Customized per Options: with filter rail (for gel seal: 9” deep
pan) or insulation.
loop fastener eases
  Quiet
  Size 24” x 24”, 24” x 48” alignment.
24x48 ≤ 1,000 CFM 24x48 ≤ 1,000 CFM per application. or end. Customized application. 6” 6”
24x96 ≤ 2,000 CFM per application.   Optional Select Flow Fabric Face 6” to 9” 6” to 9”

  Inlet diameter Highly permeable fire retardant Diffusion Fabric Assembly Options:
  Filtration fabric dispersion panel that Diffusion Includes a non-porous
Panel fabric backpanel, a   Standard 24” x 24”,
  Insulated backpan quickly mounts to the snap frame Panel
assembly. Fabric face is fully flexible diffusion panel, 24” x 48”, 24” x 96”
  Backpan construction (steel, and a fabric face. (custom sizes available)
launderable and available in either
aluminum, or stainless steel) Surround Flow (standard) or Select Added depth and size   Surround Flow (std.) or
Flow dispersion options. The increases dispersion Select Flow
*Patent Pending fabric face construction varies by area, improving airflow   Custom inlet size and
and discharge velocity.
Fabric Options
attachment type.
position
*Patent Pending

Rx fabrics feature an antimicrobial DT fabrics offer a silver color choice

treated, air permeable woven fabric.
A complement of high permeable
in a low maintenance, micro-
perforated polyester fabric. DT is a Clip Face Option Clip
Clip Retrofit Option
fabrics woven only with filament threads stronger and more durable fabric Developed as a budget-friendly alternative, the Clip Face allows the fabric To address airflow issues in existing facilities, retrofit
avoiding risk of shedding. All Rx fabrics choice for challenging (high wear) or face to affix directly to the metal backpan. While providing the same options are available to mount to existing diffusers or
are made with 50% post-industrial recycled industrial applications. Open outlets premium air dispersion characteristics, sewn-in clips on the fabric face directly to existing ductwork.
content and include a durable anti-microbial minimize filtering and extend periods easily attach to the mounting rail on the backpan. This simpler design
treatment. The lightweight fabric can be easily between maintenance. eliminates the snap frame. Besides airflow, these units can also be used to
cleaned and offers secondary filtration for minimize airborne particles emitted from aging systems
make up air. The standard model is steel with a baked enamel finish. Other options with lined ductwork.
include coated aluminum or stainless steel.
T-Bar Ceiling
Better Air Dispersion
The following images reveal airflow patterns of two “fabric” faced D-Fusers and two industry standard “metal” faced
diffusers. Each of the diffusers were tested at 750 CFM and yielded the airflow patterns as shown in both the end (24"
width) and side (48" length) view.

Fabric: MetalPan D-Fuser Metal: Radial Flow Diffusers

24"
48"

End View

Surround Flow Select Flow Flat Face - Radial Flow Radial Face - Radial Flow

24"
48"

Side View

S E S E

Fabric provides Metal diffusers

u x u x
p h p h
p a p a
l u l u
y s y s

uniform, low velocity use turbulent airflow to

t t

airflow patterns that create radial airflow

have little or no patterns that may reduce
Escape*

turbulence. In many hood capture rates and

critical environments, possibly cause hood
this may enhance Fume
Hood
Fume
Hood
failure.
hood performance. DuctSox products have been accepted within key
industry organizations such as ASHRAE, Under-
writers Laboratories (US & Canada), International
Code Council, and by many building code authori-
Air Flow Models ties throughout the world.

Surround FlowTM Select FlowTM More than evolving our standard products,
DuctSox strives to be the leader in the industry
Surround Flow is the standard air flow model Select Flow combines through our commitment to quality, service, and
for all D-Fuser models. The radial shape of the customized vent innovation.
fabric face produces a uniform and radially patterns to include
diverging air pattern. Even with high volumes, directional airflow 1 WAY:
To better support our Global Distribution Network,
D-Fusers deliver less turbulence and lower control. 2 WAY: we have expanded our production capabilities to
noise than conventional metal D-Fusers. Kunshan, China and Guadalajara, Mexico.
3 WAY: Air Dispersion Solutions for
4 WAY: Airflow Sensitive
Critical Environments

Reduced Noise Noise Criteria Comparison

Common Metal vs. D-Fuser


9866 Kapp Court, Peosta, IA 52068
Ph: 563-588-5300 • Toll Free: 866-382-8769 • Fax: 563-588-5330
Fabric faced products offer noise levels at least 10NC quieter
than metal. www.ductsox.com

The combination of perforated metal panels and louvers result in

significantly higher noise criteria (NC) ratings than fabric faced LabSox products are constructed of Rx or DT fabrics which are classified
D-Fuser products. The chart reveals NC levels for an industry by Underwriters Laboratories as an air distribution device in accordance
standard metal diffuser and a D-Fuser at varying air volumes with the requirements of NFPA 90A. Rx25 and Rx50 are also classified
in accordance with ICC Evaluation Service AC167 and UL2518.
(500 CFM, 750 CFM, and 1000 CFM).
Products may be covered by one or more of the following patents: 6565430, 6558250, 5769708, 6425417, 6626754,
Traditional shaped products can be custom configured for quiet DSLSB0315A
6280320, 6960130, 6958011, 6953396, 8434526, 8676545, 8808075, and 8844578. Other patents pending.
air delivery. © 2015 DuctSox Corp.
A Subsidiary of Rite-Hite Holding Corporation