Scribd
Upload
77 views4 pages

RL201 THRU RL207: General Purpose Plastic Rectifier Reverse Voltage - Forward Current

This document provides specifications for general purpose plastic rectifier diodes rated from 50 to 1000 Volts. The diodes feature a plastic package with UL 94V-0 flammability rating, high surge current capability of up to 70 Amps, and can operate at 2.0 Amperes of forward current at 75°C without thermal runaway. They have low reverse leakage, are constructed using a void-free molded plastic technique, and can withstand high temperature soldering of 250°C for 10 seconds.

Uploaded by

Ezequiel Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views4 pages

RL201 THRU RL207: General Purpose Plastic Rectifier Reverse Voltage - Forward Current

This document provides specifications for general purpose plastic rectifier diodes rated from 50 to 1000 Volts. The diodes feature a plastic package with UL 94V-0 flammability rating, high surge current capability of up to 70 Amps, and can operate at 2.0 Amperes of forward current at 75°C without thermal runaway. They have low reverse leakage, are constructed using a void-free molded plastic technique, and can withstand high temperature soldering of 250°C for 10 seconds.

Uploaded by

Ezequiel Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

RL201 THRU RL207

GENERAL PURPOSE PLASTIC RECTIFIER


Reverse Voltage - 50 to 1000 Volts
Forward Current - 2.0 Amperes
Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High surge current capability
2.0 ampere operation at TA=75 with no thermal runaway
Low reverse leakage
Construction utilizes void-free molded plastic technique
High temperature soldering guaranteed:
250 /10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3Kg) tension

Mechanical Data
DIM ENSIONS
Case: DO-15 molded plastic body
inches mm
Terminals: Plated axial leads, solderable per DIM Note
Min. Max. Min. Max.
MIL-STD-750, method 2026
A 0.228 0.299 5.8 7.6
Polarity: Color band denotes cathode end
B 0.102 0.142 2.6 3.6
Mounting Position: Any
Weight: 0.014 ounce, 0.39 gram C 0.028 0.034 0.71 0.86

D 1.000 - 25.40 -

Maximum Ratings and Electrical Characteristics @25 unless otherwise specified

Symbols RL201 RL202 RL203 RL204 RL205 RL206 RL207 Units

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts

Maximum average forward current I(AV) 2.0 Amps


at TA=75

Peak forward surge current


8.3mS single half sine-wave superimposed IFSM 70.0 Amps
on rated load (MIL-STD-750D 4066 method)

Maximum instantaneous forward voltage at VF 1.0 Volts


IFM=2.0A, TA=25 (Note 2)

Maximum DC reverse current TA=25 IR 5.0


at rated DC blocking voltage TA=100 50.0 A

Typical junction capacitance (Note 1) CJ 20.0 F


Typical thermal resistance R JA
40 /W
Operating and storage temperature range TJ, TSTG -65 to 175
Notes:
(1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
(2) Pulse test: pulse width 300uSec, Duty cycle 1%.

1
RATINGS AND CHARACTERISTIC CURVES

2
RATINGS AND CHARACTERISTIC CURVES

3
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.

You might also like