Scribd
Upload
152 views1 page

Automig FC 71T-1: AWS A/SFA 5.20 EN ISO 17632 A AWS A/SFA 5.36

This document summarizes the specifications and properties of the AUTOMIG FC 71T-1 flux-cored arc welding wire for welding carbon manganese steel and steel with tensile strengths up to 500 MPa. The wire is suitable for single or multi-pass welds in all positions and produces welds with high deposition rates and smooth bead profiles. It meets various international standards and approvals. Typical applications include bridges, storage tanks, construction equipment, and general carbon steel fabrication.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
152 views1 page

Automig FC 71T-1: AWS A/SFA 5.20 EN ISO 17632 A AWS A/SFA 5.36

This document summarizes the specifications and properties of the AUTOMIG FC 71T-1 flux-cored arc welding wire for welding carbon manganese steel and steel with tensile strengths up to 500 MPa. The wire is suitable for single or multi-pass welds in all positions and produces welds with high deposition rates and smooth bead profiles. It meets various international standards and approvals. Typical applications include bridges, storage tanks, construction equipment, and general carbon steel fabrication.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AUTOMIG FC 71T-1 FCAW C-Mn STEEL

FCAW WIRE FOR C-Mn STEEL AND 500 MPa TENSILE STRENGTH STEEL

CLASSIFICATION : EN ISO 17632 A AWS A/SFA 5.36 AWS A/SFA 5.20


T 42 2 R C/M 2 E71T1-C1/M21A0-CS1 E71T-1C/M

APPROVALS : RDSO (Class I)/ABS/BV/DNV/LRA/IRS/IBR/CWB/CE

KEY FEATURES :
• Rutile type gas shielded FCW wire • Suitable for high quality single and multi pass
• Low fumes, Minimal spatters welds
• Easy slag removal, smooth weld bead • All position capability
• High deposition rate • Radiographic quality weld

WELDING POSITION : DCEP

Shielding Gas Gas Flow Rate, LPM Stickout, mm


CO2 10-18 10-20
80Ar+20CO2 18-25 10-20
TYPICAL APPLICATIONS :
• Welding of C-Mn steel with tensile strength up to • Storage tanks, Structural steel
500 Mpa • Construction equipment, Farm machinery,
• Bridges, Shipbuilding, Towers, Cranes Rolling stocks
• Chemical plant machinery, Hulls • General carbon steel fabrication

STORAGE / HANDLING :

Keep dry and follow handling instructions mentioned on the box

CHEMICAL COMPOSITION OF UNDILUTED WELD METAL, Wt% :


C Mn Si S P
Typical 0.08 1.5 0.4 0.01 0.01
Specification 0.10 max 1.75 max 0.90 max 0.025 max 0.025 max

MECHANICAL PROPERTIES OF ALL WELD METAL :


UTS, MPa YS at 0.2% offset, EL% CVN Impact at
Condition
MPa -20°C, J
Typical 570 470 26 75
As Welded
Specification 500-640 420 min 22 min 47 min

Hardness, 3 Layer: 140-200 BHN


Chemistry and mechanical properties tested with 100% CO2 shielding gas
PARAMETERS - PACKING DATA :
Ø, mm Voltage, V Amperage, A Kg/Spool
1.2 20 – 30 130 - 300 15
1.6 24 – 32 200 - 380 15
Use 1-2 volts lower when using mix shielding gas.

EQUIVALENT :
SMAW Electrode: Supabase, Supabase X Plus GMAW Wire: Automig 70S-6

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

60

You might also like