Scribd
Upload
86 views1 page

Balance de Masa para El Procesamiento de 100 T RFF

This document provides a summary of the material balance and processes involved in processing 100 tons of fresh fruit bunches to produce palm oil and palm kernel. Key steps include bunch stripping, sterilization, digestion to produce crude oil, pressing to separate oil and cake, clarification of diluted crude oil, and refining to produce pure palm oil. Byproducts include empty fruit bunches, press cake, fiber, shells, and palm kernel. Total oil loss in the process is estimated at 1.77% of the original fresh fruit bunches.

Uploaded by

kennyher caballero blanco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views1 page

Balance de Masa para El Procesamiento de 100 T RFF

This document provides a summary of the material balance and processes involved in processing 100 tons of fresh fruit bunches to produce palm oil and palm kernel. Key steps include bunch stripping, sterilization, digestion to produce crude oil, pressing to separate oil and cake, clarification of diluted crude oil, and refining to produce pure palm oil. Byproducts include empty fruit bunches, press cake, fiber, shells, and palm kernel. Total oil loss in the process is estimated at 1.77% of the original fresh fruit bunches.

Uploaded by

kennyher caballero blanco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Datasheet

Material Balance for Processing 100 t Fresh Fruit


Bunches
N Ravi Menon
Steam admitted : 25 t CONDENSATE OUT: 20 t
Steam exhausted : 17 t STERILIZATION (Water with 1% residual oil)
(approximate values) Pressure cooking at 3 bar about 90 min TO EFFLUENT POND
Heat lost = 46 560 MJ Oil loss = 0.1% to FFB
EMPTY FRUIT BUNCH:
BUNCH STRIPPING-ROTARY DRUM: 17 rpm
23 t
Separates fruit from bunches
Oil loss: 0.52% to FB
STERILISED FRUIT: 66 t

DIGESTION
45 min: 90°C-95°C : steam heating. Stirrer 5 rpm, 5 sets of blades
CRUDE OIL: 40 t
Oil 55%, water 35%, solids PRESSING PRESS CAKE
10% 10 rpm Twin screw rotates opposite directions 26 t

NUT and FIBRE mixture


CRUDE OIL (46.5% to FFB) Water dilution (40%) 18.5% FIBRE: 13 t conveyed to the fibre cyclone
to FFB to get: Oil 39%, water: 54%, solids 7% in DCO and conveyed to boiler firing platform (oil
loss = 0.55% FFB)
VIBRATING SCREEN: (to remove fibrous tailings) NUT 13 t (oil loss: 0.05% to FFB)
Nuts dried in steam/air heated silos 70°C
DILUTED CRUDE OIL TANK (65% to FFB)
for 14 hr
Options: 1. De-sanding tanks 2. Primary clarifiers
3. Coalescence plate separator 4. horizontal clarifier
NUT CRACKERS
To remove as much oil and solids as possible to reduce
residual oil in the underflow of the final clarifier
VERTICAL CONTINUOUS CLARIFIER Cracked mixture: kernel and shell
PALM OIL 20 t CRACKED MIXTURE
SLUDGE 40 t SEPARATION
(with dirt) Waste water
1. hydro-cyclones
SLUDGE CENTRIFUGE/ about 5%
PURIFIER 2. Clay-bath separators
DECANTER 3.winnowing systems (dry)
Waste water Recovered
PURE PALM OIL SHELL: 7 t
clarification oil to WET KERNEL
(OER = 20%) sent to silos
(Oil loss: 0.55%) clarifier
PALM OIL MIL MILL VACUUM DRYER KERNEL DRYING SILOS 14 hr at 70° C
EFFLUENT
also from sterilisers 10%
nut station 5% PALM OIL PALM KERNEL
65% STORAGE TANKS BULK STORAGE SILOS
(Total oil loss = 1.77% to
FFB)
Note: Data presented here may not necessarily be the same for all mills.

PALM OIL ENGINEERING BULLETIN NO. 121 55

You might also like