MANN+HUMMEL Process Filters

Contents

• MANN+HUMMEL – Partner to Industry Page 3

• Product Overview Page 4

• HydroFluid Page 7

• AutoFluid Page 11

• Gap-type tube filters and Profluid Page 17

• Wire gap-type filters and Plate gap-type filters Page 27

• High-pressure filters for hydraulic filtration Page 31

• Technical Service Page 43

• Useful Information Page 47

• International Locations Page 53

2
MANN+HUMMEL – Partner to Industry
MANN+HUMMEL’s extensive Automotive Technology Industrial Filters Business The product range includes:
product range comprises Unit – Solutions for nume-
products and services for • Air cleaner systems rous filtration applications • Air cleaners and cabin
various industries. The com- • Intake Manifold Systems filters
pany organization consists • Liquid filter systems The Industrial Filters • Liquid filters
of two company divisions • Filters business unit in Speyer • Process filters
for automotive and industrial has customers in almost • EDM filters
applications divided into seven Industrial Technology all technical fields: • Air/oil separators
business units. This speziali-
sation enables us to react • Industrial Filters • Mechanical engineering
more flexibly to the individual • ProTec and production technology
needs of our customers. • Hydromation • Industrial engines, con-
struction and agricultural
machines
• Compressed-air and
vacuum technology
• Representatives and
subsidiaries

3
Efficient and economic solutions

The filtration of products Applications which involve So choose MANN+HUMMEL A wide range of
and liquids in a production the filtration of process as your filter partner. We MANN+HUMMEL services
process often demands the liquids are never the same. offer efficient and economic also ensures that you will
highest requirements from Basic parameters such as solutions. Our expertise be professionally advised
a filter system. Customers dirt volumes, type of dirt, combined with an extensive during the consultation
need low-cost solutions nominal flow rate or gap product range incorporating process and after the
which offer maximum pro- widths will always vary. Ideal a variety of cleaning systems purchase of your
cess reliability. function and economy can enables customised solutions MANN+HUMMEL filter
therefore only be achieved available for each individual system.
with a filter solution which application.
is specially adapted to the
application. In the long run
standard products „off the
shelf“ are inefficient and
expensive.

Our filter systems cover For the filtration of:

many industrial fields:

• automobile industry • chemical substances

• chemicals • cleaning media
• environmental technology • cooling lubricant emulsions
• food industry • cooling water
• machine tools • cutting oils
• metalworking industry • engine fuels
• municipal authorities • fuels
• oil industry • grease and wax
• paints industry • high viscosity materials
• paper industry such as creams and pastes
• pharmaceutical industry • industrial water
• power stations • isocyanates
• steel mills • mineral, synthetic and
natural oil
• polyolefines
• process emulsions
• process water
• waste water

4
Overview of all process filters

Product Picture Cleaning Gap Application Page

principle widths

HydroFluid • dynamic (contact-free, from • extremely dirty low 7

without backflushing, 10 µm viscosity media
without mechanical • small gap widths
scrapers)

AutoFluid • only backflushing from • low and high viscosity 11

10 µm media
• small gap widths

Profluid • combination of clea- from • low and high viscosity 17

ning by backflushing 30 µm media
and mechanical • high nominal flow
scraping rates
• media containing
various types of dirt

Gap-type tube • mechanical scrapers from • watery and/or 17

filters 50 µm aggressive media

Wire gap-type • mechanical scrapers from • fuels and lubricants 27

filters 30 µm

Plate gap-type • mechanical scrapers from • high viscosity media 27

filters (gap cleaners) 100 µm • fuels and lubricants

High-pressure • manual — • for pressures up to 31

filters 400 bar

5
6
HydroFluid
Dynamic filter system

7
HydroFluid –
the fine one for a lot of dirt

The HydroFluid dynamic filter continuous production flow All advantages at a glance:
system from MANN+HUMMEL as is required for industrial
is an innovative product which, application areas. • high dirt volumes with
regarding efficiency and eco- The HydroFluid functions simultaneous small gap
nomy, sets new standards in without interrupting production widths from 10 µm
the field of continuous filtration as is often necessary with • continuous filter cleaning
of liquids containing solids. other systems due to a filter without loss of performance
It has been very successful change, backflushing or • continuous production
for applications with high dirt switchover to a parallel filter process
volumes where small gap system. As a result sensitive • process reliability through
widths are also required. A production processes enjoy defined gap widths
new kind of hydrodynamic stable production conditions • lasting filtration of fibrous
cleaning principle enables without process fluctuations. materials and suspended
matter
• change of filter elements
unnecessary
• low maintenance costs
• very economic

8
Working principle of the HydroFluid

The dirtied liquid flows tan- rotate the liquid. Centrifugal ciency. Both effects also pre- carried out at defined time
gentially into the ring channel forces transport dirt particles vent filter cake from forming intervals.
located separately from the from the insert in the direc- on the surface of the insert
housing of the HydroFluid. tion of the housing wall where so that this remains perma- The HydroFluid with its
The ring channel design they are continuously deflec- nently free. The design of innovative working principle
dampens the flow and achie- ted downwards. the dirt collection chamber is the first automatic filter
ves an ideal preseparation. enables an ideal build-up of which allows the continuous
The dynamic scrapers gene- dirt and the tangential dis- fine filtration of heavily dirtied
Dynamic scrapers move rate a partial vacuum (Fig. 2) charge of sludge from the liquids.
around the insert without and unstable flow conditions filter. The sludge discharge
making contact. The scrapers on the surface of the insert. is either regulated by means
additionally displace and This improves filtration effi- of differential pressure or

Insert
Unfiltered
media side
Dynamic scrapers Support profile

Sludge
discharge

Unfiltered media side Filtered media side

Filtered media side

Fig. 1: Filter design Fig. 2: Pressure distribution in the housing

Pressure distribution in the

filter housing

Die hydrodynamic cleaning and local pressure differences dirt particles onto the surface flow (with a partial vacuum)
effects can be explained by in the filter housing. The of the insert so that they are through the insert. This pro-
looking at the pressure distri- result is that the insert is scraped off without direct cess repeats itself many times
bution in the filter housing. cleaned continuously. contact. At the same time per second at each position of
The rotation of the dynamic there is a pressure reduction the insert.
scrapers at a speed of approx. The scraper pushes a shoul- (blue) at the rear end of the
12 m/s generates turbulence der wave (red) in front raising scraper generating a back

9
 a

b
d

Housing including HydroFluid HydroFluid

insert top view insert

Specifications and order numbers

Complete filter Order numbers Material * Dimensions in mm

a b c d e f

Sizes 100 96 200 28 001 Stainless steel (1.4301) 320 1140 700 R2 R2 ø 508
Sizes 200 96 200 48 001 Stainless steel (1.4301) 410 1200 900 R 21/2 R 21/2 ø 600
* Other materials on request.

Gap widths from 10 µm

Nominal nominal flow rate Size 100 approx. 15 m3/h with 0.15 bar initial differential pressure
(e.g.: water, gap width 25 µm, 25 °C) Size 200 approx. 30 m3/h with 0.15 bar initial differential pressure
Connections Size 100 R2
Size 200 R 21/2
Permissible operating pressure 6 bar
Mains connection 400 V AC, 50 Hz
Control available
Differential pressure supervision available
Sludge outlet available
Sludge outlet valve dependent on time or differential pressure
Permissible operating temperature 110 °C
Version for explosive atmospheres optional
Filter configuration For your filter system enquiry please use the filter configuration
questionnaire on page 50.

10
AutoFluid
Automatic backflushing filter

11
AutoFluid –
the fine one for low and high viscosity liquids

In the field of process filtra- Thanks to this efficient

tion AutoFluid the automatic cleaning system AutoFluid
filter has proven itself to be achieves a long service life.
highly efficient and economic In comparison to conventio-
for low and high viscosity nal automatic filters or non
materials with gap widths self-cleaning filter systems
above 10 µm. Using a back- AutoFluid additionally offers
flushing action it is automati- considerable potential for
cally cleaned without using reducing operating costs.
mechanical scrapers.

AutoFluid offers the

following advantages:

• high potential for reducing • quick cleaning cycles with • easy to service
operating costs minimal backflushing
volumes and pressure loss • variable and easy integra-
• fully-automatic operation tion of a filter in an existing
• compact system thanks to production line
• long service life the easy-to-clean charac-
teristics of the inserts • easy operation with the
• process reliability through supplied control system
a defined sieve geometry • high stability of inserts with
varying differential pressu- • innovative design
• gap widths from 10 µm res

12
Working principle of the AutoFluid

Pressure transmitter filtered

Filtered media side media side
Design Unfiltered media side Pressure transmitter unfiltered
media side
The MANN AutoFluid is a
multi-chamber backflushing Valve inlets
filter with four inserts which
serve to offer ideal backflus-
hing characteristics. Depen-
ding on the requirements of
the application, the housing is
available in aluminium or
stainless steel. A control unit
specially designed for the Inserts
AutoFluid monitors the pre-
set differential pressure,
manages the valves according
to the operating parameters
and controls the backflushing
process which cleans the
insert.
Valves for the
sludge discharge
Connection for the
sludge discharge

Operation and control

The MANN AutoFluid functions The ability to select between

fully automatically. several backflushing pro-
grams means that efficient
The microcontroller specially cleaning with a minimum
developed for the AutoFluid backflushing volume and long
can be easily operated using service life can be achieved.
the 4 button operating panel
and the LCD without previous All parameters on the MANN
programming knowledge. AutoFluid can be individually
set in order to adapt to the
The control unit checks the respective operating condi-
function of the pressure tions and requirements regar-
transmitter, monitors the set ding the concentration, type,
pressure values and times form and density of the dirt
and creates error messages and the fractional distribution
if critical operating conditions and viscosity of the medium
arise. It thereby protects the to be filtered.
devices and machines loca-
ted downstream in the pro-
duction line.

13
Filtration Filtered media side
Unfiltered media side

The medium to be cleaned

flows in from the unfiltered
media side into the housing
and flows through the inserts
from the outside to the inside.
The coarse dirt particles held
back either form a sediment
in the lower part of the hou- Valve inlet
open
sing or a deposit on the
surface of the inserts. The
cleaned medium flows through
to the filtered media side and
out of the filter.

Connection Valve for the

for the sludge sludge discharge
discharge closed

Backflushing
Filtered media side The dirt particles filtered out and the sludge discharge
Unfiltered media side lead to an increase in the valve is opened. As a result
differential pressure. When the insert is cleaned. After the
Valve inlet
closed the pre-set differential pres- cleaning of the first insert has
sure is reached, all four taken place, the other three
inserts are backflushed one inserts are backflushed one
after the other without stop- after the other. When the
ping the operation of the backflushing cycle has ended
whole system. During this the differential pressure in the
cleaning process the inlet in filter has returned to its initial
the respective insert is closed value.

Connection Valve for the

for the sludge sludge discharge
discharge open

14
 550 440

G3

G3

760

G 1 1/2 Housing including AutoFluid

insert side view

629

ø 70
AutoFluid
insert

Specifications and order numbers

Complete filter Order number Material *

Standard model 30 µm including control 62 404 93 101 Anodised aluminium

* Other materials on request.

Gap widths 10 µm, 20 µm, 30 µm, 50 µm, 75 µm, 100 µm

(other gap widths on request)
Nominal flow rate 75 m3/h with 0.5 bar initial differential pressure
(e.g.: water, gap width 30 µm, 25 °C) 100 m3/h with 0.85 bar initial differential pressure
Connections G 3 (unfiltered and filtered media side)
G 11/2 (sludge outlet)
Backflushing Integrated
Sludge outlet Integrated
Permissible operating pressure 10 bar
Differential pressure supervision Integrated, adjustable
Pressure on the unfiltered media side P1 = 1.5 - 10 bar
Permissible operating temperature 80 °C
Materials Aluminium (coatings on request), stainless steel
Pneumatic connection G 1/4, 6 ±1 bar
Mains connection 230 V AC, 50 Hz
Control Integrated MANN+HUMMEL microcontroller
Backflushing medium Own medium
Backflushing control Time or differential pressure dependent
Version for explosive atmospheres Optional
Filter configuration For your filter system enquiry please use the filter
configuration questionnaire on page 50.

15
16
Profluid and Gap-type tube filters
Automatic filters

17
Profluid and Gap-type tube filters –
the efficient answer for multi-purpose applications

Identical technology – two

different cleaning principles

Automatic filters such as Gap-type tube filters can it very efficient for filtration
Profluid or Gap-type tube be cleaned during operation tasks where varying types
filters are used to efficiently by means of mechanical and sizes of particle must be
increase the service life of scraping. The Profluid is an filtered out of a liquid. This
process liquids. They are automatic self-cleaning filter working principle has proven
suitable for the filtration of system with a design based to be extremely efficient for
low and high viscosity media. on gap-type technology. The gap widths under 100 µm.
Accordingly, they may be combination of cleaning by
used in almost all industrial backflushing together with
fields. mechanical scraping makes

18
The advantages at a
glance:

Profluid
• high performance regarding
filter fineness and nominal
flow rates
• gap widths from 30 µm
• effective dual cleaning
mechanism
• automatic cleaning without Gap-type tube filters
interrupting production • easy to service
• robust and reliable • gap widths from 50 µm
• individual setting of back- • automatic cleaning without
flushing cycles interrupting production
• reliable with all kinds of • the classic filter - proven
dirt particles time and time again
• economic • economic

19
The working principle

Geared motor (4)

Rotating
gap-type tube (3)
Profluid
Backflusing chamber (7)
+ Scraper (5)

Filter inlet (1)

Filtered Unfiltered
media side media side

Filter outlet (10)

Housing (2)

Profluid Backflushing arm (8)

Profluid

Profluid Backflush outlets (9)

Sludge outlet (6)

Rotating gap-type tube (3) Backflushing chamber (7)

20
The working principle

The difference between

Gap-type tube filters and the
Profluid lies in the cleaning Direction of rotation
Wedge wire
system. Gap-type tube filters
are mechanically cleaned by Longitudinal wire
dirt scrapers. The cleaning Scraper plate
Rotating
principle of the Profluid com-
gap-type filter Scraper
bines backflushing with dirt (stationary)
scraping.

Unfiltered
Filtered media side media side

Gap width

Backflushing
chamber
(only Profluid)
Usual direction of flow
Backflushing direction
of flow

Filtration Dirt scraping Backflushing with Profluid

The medium to be cleaned Driven by a geared motor (4), Particles from a certain size towards the outside. The
flows into the housing (2) the gap-type tube rotates up cannot be removed by the backflushing procedure is
via the filter inlet (1) and along a stationary scraper scraper. On conventional submitted to specific para-
passes through the gap-type plate (5) that removes the gap-type tube filters, they meters, such as operation
tube (3) from the outside to filter cake. It then sinks to the deposit in the gaps and – hours, time pulse and in-
the inside. All impurities in bottom of the housing and is under certain operation crease of the differential
the medium which are larger discharged when necessary conditions – quickly clog pressure.
than the gap width are re- via the sludge outlet (6). To the filter.
tained on the surface of the simplify the disposal of the Operating pressure and set
tube. The coarse dirt particles solid particles filtered out, a Near size particles can be backflush volume influence
either sink to the lower part drying valve can be installed. eliminated from the gap-type decisively the efficiency of
of the housing or form a filter tube through the use of a backflushing.
cake on the exterior surface backflushing chamber (7).
of the tube. The whole length of the tube Profluid’s combined action
is flushed: When the back- of dirt scraping and back-
flushing line is opened, the flushing, a patented
medium flows into the un- procedure, ensure quality
pressurized backflushing cleaning without interrup-
chamber in opposite direction ting the production.
to normal, and is drained

21
Specifications and order numbers DN 50

813

ø 57 405.5
420 ø 57 405.5
232
232

M 22x1.5
210

Sludge outlet G1

ø 108

Housing including Gap-type tube filter Profluid

insert insert insert

Complete filter Order numbers Material *

including drive

Profluid 54 524 8x 264 Aluminium

Gap-type tube filters 54 524 8x 274 Aluminium
* Other materials and product sizes on request.

Gap widths 30 µm (only Profluid), 50 µm, 75 µm, 100 µm, 150 µm

(other gap widths on request)
Nominal flow rate 10 m3/h with 0.15 bar initial differential pressure, gap width 50 µm
(e.g.: water, 25 °C) 15 m3/h with 0.3 bar initial differential pressure, gap width 50 µm
Connections DN 50 PN 40 (unfiltered and filtered media side), G 1 (sludge outlet)
M 22x1.5 (backflushing, only Profluid)
Backflushing Integrated (backflushing, only Profluid)
Sludge outlet Integrated
Permissible operating pressure 40 bar
Differential pressure supervision Available
Pressure on the unfiltered media side P1 = 1.5 – 40 bar
Permissible operating temperature 100 °C (higher temperatures on request)
Materials Aluminium, aluminium chemically nickeled, other materials on request
Mains connection 230 V AC, 50/60 Hz
Control Available
Sludge outlet valves and backflushing Available
Backflushing medium Own medium (only Profluid)
Cleaning Time or differential pressure dependent as option
Version for explosive atmospheres Optional
Filter configuration For your filter system enquiry please use the filter
configuration questionnaire on page 50.

22
Specifications and order numbers DN 65

1080

ø 85 644
640 ø 85 644
358
358

G 3 /4
232.5

Sludge outlet G1

ø 170

Housing including Gap-type tube filter Profluid

insert insert insert

Complete filter Order numbers Material *

including drive

Profluid 54 636 8x 114 Aluminium

Gap-type tube filters 54 636 8x 104 Aluminium
* Other materials and product sizes on request.

Gap widths 30 µm (nur Profluid), 50 µm, 75 µm, 100 µm, 150 µm, 200 µm, 500 µm
(other gap widths on request)
Nominal flow rate 30 m3/h with 0.1 bar initial differential pressure, gap width 50 µm
(e.g.: water, 25 °C) 50 m3/h with 0.5 bar initial differential pressure, gap width 50 µm
Connections DN 65 PN 16 (unfiltered and filtered media side), G 11/2 (sludge outlet)
G 3/4 (backflushing, only Profluid)
Backflushing Integrated (backflushing, only Profluid)
Sludge outlet Integrated
Permissible operating pressure 12 bar
Differential pressure supervision Available
Pressure on the unfiltered media side P1 = 1.5 – 12 bar
Permissible operating temperature 100 °C (higher temperatures on request)
Materials Aluminium, aluminium chemically nickeled, other materials on request
Mains connection 230 V AC, 50/60 Hz
Control Available
Sludge outlet valves and backflushing Available
Backflushing medium Own medium (only Profluid)
Cleaning Time or differential pressure dependent as option
Version for explosive atmospheres Optional
Filter configuration For your filter system enquiry please use the filter
configuration questionnaire on page 50.

23
Specifications and order numbers DN 80

1310

ø 97 745
770 ø 97 745
400
400

Sludge outlet DN 50

ø≠220

Housing including Gap-type tube filter Profluid

insert insert insert

Complete filter Order numbers Material *

including drive

Profluid 54 740 8x 164 Aluminium

Gap-type tube filters 54 740 8x 184 Aluminium
* Other materials and product sizes on request.

Gap widths 30 µm (nur Profluid), 50 µm, 75 µm, 100 µm, 150 µm, 500 µm
(other gap widths on request)
Nominal flow rate 50 m3/h with 0.3 bar initial differential pressure, gap width 50 µm
(e.g.: water, 25 °C) 80 m3/h with 0.6 bar initial differential pressure, gap width 50 µm
Connections DN 80 PN 16 (unfiltered and filtered media side), DN 50 PN 16 (sludge outlet)
G1/DN 25 PN 16 (backflushing, only Profluid)
Backflushing Integrated (backflushing, only Profluid)
Sludge outlet Integrated
Permissible operating pressure 12 bar
Differential pressure supervision Available
Pressure on the unfiltered media side P1 = 1.5 – 12 bar
Permissible operating temperature 100 °C (higher temperatures on request)
Materials Aluminium, aluminium chemically nickeled, other materials on request
Mains connection 230 V AC, 50/60 Hz
Control Available
Sludge outlet valves and backflushing Available
Backflushing medium Own medium (only Profluid)
Cleaning Time or differential pressure dependent as option
Version for explosive atmospheres Optional
Filter configuration For your filter system enquiry please use the filter
configuration questionnaire on page 50.

24
Specifications and order numbers DN 100

1780

ø 190 1050
1200 ø 190 1050

625 625

Sludge outlet DN 80

ø 340

Housing including Gap-type tube filter Profluid

insert insert insert

Complete filter Order numbers Material *

including drive

Profluid 54 964 8x 384 Aluminium

Gap-type tube filters 54 964 8x 394 Aluminium
* Other materials and product sizes on request.

Gap widths 30 µm (nur Profluid), 50 µm, 75 µm, 100 µm, 150 µm, 200 µm, 500 µm
(other gap widths on request)
Nominal flow rate 80 m3/h with 0.2 bar initial differential pressure, gap width 50 µm
(e.g.: water, 25 °C) 100 m3/h with 0.4 bar initial differential pressure, gap width 50 µm
Connections DN 100 PN 16 (unfiltered and filtered media side), DN 80 PN 16 (sludge outlet)
DN 50 PN 16 (backflushing, only Profluid)
Backflushing Integrated (backflushing, only Profluid)
Sludge outlet Integrated
Permissible operating pressure 12 bar
Differential pressure supervision Available
Pressure on the unfiltered media side P1 = 1.5 – 12 bar
Permissible operating temperature 100 °C
Materials Aluminium, aluminium chemically nickeled, other materials on request
Mains connection 230 V AC, 50/60 Hz
Control Available
Sludge outlet valves and backflushing Available
Backflushing medium Own medium (only Profluid)
Cleaning Time or differential pressure dependent as option
Version for explosive atmospheres Optional
Filter configuration For your filter system enquiry please use the filter
configuration questionnaire on page 50.

25
26
Wire and Plate gap-type filters

27
Wire and Plate gap-type filters

Proven a thousand times

over and a real classic

Wire and Plate gap-type They can be cleaned during

filters are suitable for the operation, are easy to main-
filtration of heavily dirtied low tain and are characterised by
and high viscosity media in a long service life.
almost all industrial fields.

Plate gap-type filters Turn either way

for gap width ≥ 100 µm to clean

Stationary
The Plate gap-type filter discs, the dirt particles are gap cleaner
insert consists of steel discs deposited on the surface and
which are piled up on a in the gaps. By turning the
central pin. insert with the handle, the
The gap width between the dirt gathers on the row of
discs is determined by gap cleaners and falls into
spacers between the discs. the sludge collection cham-
A stationary gap cleaner ber where it is discharged
runs through every gap. As by opening a ball valve.
the fluid flows between the

Rotating Gap width

filter

Stationary Wire gap-type filters

scraper for gap width ≥ 30 µm
Turn only in
direction of
arrow
The Wire gap-type insert particles are deposited in
consists of a non-rusting, high the gaps. By turning the
tensile steel wire wound in a insert with the handle, the
spiral around an aluminium dirt is removed by a statio-
frame. The exact position of nary scraper and then falls
the steel wire on the frame down into the sludge collec-
provides for equal gaps. As tion chamber where it is
the liquid to be filtered flows discharged by opening a
through the insert the dirt ball valve.
Rotating filter

Gap width

28
 ca. 500 M 16
32 deep ø 56 ca. 420
Screw
holes 250
ø 125

Sludge outlet G1

ø 108

Housing including Plate gap-type filters

insert insert

Specifications and order numbers

for Plate and Wire gap-type filters

Standard versions Order numbers Material *

for complete filter
DN 50, 100 µm
Plate gap-type filters 51 525 7x 784 Aluminium
Wire gap-type filters 53 524 7x 191 Aluminium
* Other materials and product sizes on request.

Gap widths Plate gap-type filters 100 µm, 200 µm, 400 µm, 800 µm
(other gap widths on request)
Nominal flow rate 12 m3/h with 0.3 bar initial differential pressure, gap width 100 µm
(e.g.: water, 25 °C)
Gap widths Wire gap-type filters 30 µm, 50 µm, 100 µm, 150 µm, 200 µm, 500 µm
(other gap widths on request)
Nominal flow rate 10 m3/h with 0.15 bar initial differential pressure, gap width 50 µm
(e.g.: water, 25 °C) 15 m3/h with 0.30 bar initial differential pressure, gap width 50 µm
Connections Metric threads, pipe threads and flange
Sludge outlet Integrated
Permissible operating pressure 40 bar (4 MPa)
Differential pressure supervision Integrated, adjustable
Pressure on the unfiltered media side P1 = 1.5 - 40 bar
Permissible operating temperature 100 °C
Materials Housing: AL, GG 1.4581
Insert: AL, GG 1.4301
Mains connection for drive 230/110 V AC, 50/60 Hz
Control and supervision Optional
Control for dirt outlet Time or differential pressure dependent as option
Version for explosive atmospheres Optional
Filter configuration For your filter system enquiry please use the filter
configuration questionnaire on page 50.

29
30
High-Pressure Filters
Hydraulic filtration

31
High-Pressure Filters
Design Application Versions available:

A high-pressure filter consists MANN High-pressure filters P

of a filter housing, a filter as per DIN 24550 are used without bypass valve
head with two threads for primarily for the filtration of without service indicator
connection and a replaceable lube oils and hydraulic fluids R
MANN micro-Top filter ele- in engines and installations.
ment from the HD range. A special version in star-
The dirt-retaining capacity of pleated strainer design is P
this element is particularly available for the filtration of with bypass valve
high due to the large filtering polyurethane components and service indicator
surface. The design and the (see page 38 to 41). R
pleat support of the filter
element allow for pressures
ranging from 10 to 180 bar P
(1 MPa to 18 MPa), tested with bypass valve
to DIN ISO 2941. and service switch

P
without bypass valve
with service switch

The service indicator or

switch and the bypass valve
are combined to signal the
need for maintenance before
the bypass valve opens.

32
High-Pressure Filters

Operation Assembly and Maintenance

MANN+HUMMEL filters in hydraulic circuits
MANN High-pressure filters The filter is installed in the
are used as full-flow pipeline using the connection
filters, i.e. they must be threads (see dimension table
installed in the circuit in for the threads). Attention High-pressure filter

a way ensuring that all the must be paid to the direction

liquid to be cleaned of flow, indicated on the In-line
High pres-
passes through the filter threads by arrows. sure pump filter
Feed
every time it circulates. Maintenance is limited to the pump
Filter for tank
ventilation
replacement of the MANN
micro-Top filter element.

Tank

Suction filter

Low-pressure filter

Technical data
Filter element Performance data as per ISO 4572 at a differential pressure of 5 bar (500 KPa)
(differential pressure stability)

HD ... / 1 ß6 ≥ 75
HD ... / 2 ß10 ≥ 75 (∆p 15 bar/1.5 MPa)
HD ... / 3 ß10 ≥ 75 (∆p 60 bar/6.0 MPa)
HD ... ß25 ≥ 75

Filter fineness: ß6 to ß25 ≥ 75

Nominal flow rate: 20 to 125 l/min
Operating pressure: 200/400 bar (20/40 MPa)
Operating temperature: -25 °C to +120 °C
Material: Filter head made of cast iron with spheroidal graphite; Filter can made of steel
Bypass valve: Opening pressure: 7 bar (700 KPa)
Service indicator: Indication through red signal ring at a differential pressure of 5 bar (500 KPa)
Service switch: Switching at a differential pressure of 5 bar (500 KPa)

33
 High-Pressure Filters
Nominal pressure 200 bar (20 MPa)

Characteristics

Flow resistance as per

ISO 3968 at 32 mm2/s.

2.0
Differential pressure ∆ p (bar)

/1
46
1.0 HD

0.5

0.3
X
0.2 /3
46
HD
/2,
46 46
0.1 HD HD

0.05
h2
0.03 Service switch
swivels by 360°
0.02
1 2 3 4 5 10 20 30 50 100 21.5
d
Volume flow (l/min)

182 ø 63

SW 19
ø 52
removal clearance 125

Dimensions filter housing

Dimensions and part with service switch
numbers

• Filter size: 0.2 l

• Weight: approx. 2 kg View X
30
M 8, 10 deep
Service switch
18 swivels by 360°

52

62

Filter housing with

service switch

Order numbers Nominal MANN Dimensions in mm Service Collapse-/burst Filter

for complete filter flow rate micro-Top and inches indication1) pressure fineness
filter element µm absolute

[l/min] d h2 [bar] [MPa]

67 201 62 106 25 HD 46 M 18x1.5 13 V 10 1 25

67 201 62 101 25 HD 46/2 M 18x1.5 13 V 10 1 10
67 201 62 126 20 HD 46/1 G 3/8 63 S 60 6 3
67 201 62 116 25 HD 46/3 G 3/8 63 S 60 6 10
1) V = Bypass valve (opening pressure: 7 bar)
S = Service switch make/break contact (convertible)

34
 High-Pressure Filters
Nominal pressure 400 bar (40 MPa)

2.0
Differential pressure ∆ p (bar)

Characteristics
1.0

Flow resistance as per

0.5
/2 ISO 3968 at 32 mm2/s.
65
0.3
, HD
6 5/1 65
0.2 HD HD

0.1

0.05

0.03
5 10 20 30 50 100 200 500

Volume flow (l/min)

X Dimensions and part

numbers
Service indicator
104
• Filter size: 0.2 l
• Weight: approx. 4.9 kg
h2

25.5
G 3/4 G 3/4

158.5 View X
ø 100 M 10, 20 deep
Service switch
swivels by 360°
38
15
SW 36 75
h2
6 kt removal
ø 78 clearance 12 18

Height Filter housing with

Dimensions filter housing service switch service switch

Order numbers Nominal MANN h2 Service Collapse-/burst Filter

for complete filter flow rate micro-Top indication1) pressure fineness
filter element µm absolute

[l/min] [mm] [bar] [MPa]

67 300 62 156 63 HD 65 11.5 – 45 4.5 25

67 300 62 166 63 HD 65 53.5 A and V 45 4.5 25
67 300 62 176 63 HD 65 70.5 S and V 45 4.5 25
67 300 62 202 45 HD 65/2 11.5 – 15 1.5 10
67 300 62 212 45 HD 65/2 53.5 A and V 15 1.5 10
67 300 62 222 45 HD 65/2 70.5 S and V 15 1.5 10
67 300 62 180 35 HD 65/1 70.5 S 180 18 3
1) A = Service indicator
V = Bypass valve (opening pressure: 7 bar)
S = Service switch make/break contact (convertible)

35
High-Pressure Filters
Nominal pressure 400 bar (40 MPa)

2.0

Differential pressure ∆ p (bar)

Characteristics
1.0

Flow resistance as per 0.5

ISO 3968 at 32 mm2/s. 0/2
61
0.3 D
,H
0/1 61
0
0.2 61
HD HD

0.1

X 0.05

Service indicator 0.03

104 5 10 20 30 50 100 200 500

Volume flow (l/min)

h2

25.5
G1 G1

211.5
ø 100 Dimensions and part
numbers

• Filter size: 0.4 l

• Weight: approx. 5.6 kg
SW 36 125
4 kt removal
ø 79 clearance

Dimensions filter housing

View X
M 10, 20 deep
Service switch
swivels by 360°
38
15
h2

12 18

Height Filter housing with

service switch service switch

Order numbers Nominal MANN h2 Service Collapse-/burst Filter

for complete filter flow rate micro-Top indication1) pressure fineness
filter element µm absolute

[l/min] [mm] [bar] [MPa]

67 301 62 186 100 HD 610 11.5 – 45 4.5 25

67 301 62 196 100 HD 610 53.5 A and V 45 4.5 25
67 301 62 206 100 HD 610 70.5 S and V 45 4.5 25
67 301 62 222 70 HD 610/2 11.5 – 15 1.5 10
67 301 62 232 70 HD 610/2 53.5 A and V 15 1.5 10
67 301 62 242 70 HD 610/2 70.5 S and V 15 1.5 10
67 301 62 210 50 HD 610/1 70.5 S 180 18 3
1) A = Service indicator
V = Bypass valve (opening pressure: 7 bar)
S = Service switch make/break contact (convertible)

36
 High-Pressure Filters
Nominal pressure 400 bar (40 MPa)

2.0
Differential pressure ∆ p (bar)

Characteristics
1.0

0.5
Flow resistance as per
2
3/
61 ISO 3968 at 32 mm2/s.
0.3 HD
1,
3/ 3
61 61
0.2 HD HD

0.1

0.05

0.03
5 10 20 30 50 100 200 500

Volume flow (l/min)

Service indicator Dimensions and part

104 numbers

h2 • Filter size: 0.6 l

• Weight: approx. 6.3 kg
25.5
G1 G1

258.5
ø 100
View X
M 10, 20 deep
Service switch
swivels by 360°
38
15
SW 36 125 h2
removal
4 kt
clearance 12 18
ø 79

Height Filter housing with

Dimensions filter housing service switch service switch

Order numbers Nominal MANN h2 Service Collapse-/burst Filter

for complete filter flow rate micro-Top indication1) pressure fineness
filter element µm absolute

[l/min] [mm] [bar] [MPa]

67 302 62 146 125 HD 613 11.5 – 45 4.5 25

67 302 62 156 125 HD 613 53.5 A and V 45 4.5 25
67 302 62 166 125 HD 613 70.5 S and V 45 4.5 25
67 302 62 192 85 HD 613/2 11.5 – 15 1.5 10
67 302 62 202 85 HD 613/2 53.5 A and V 15 1.5 10
67 302 62 212 85 HD 613/2 70.5 S and V 15 1.5 10
67 302 62 170 60 HD 613/1 70.5 S 180 18 3
1) A = Service indicator
V = Bypass valve (opening pressure: 7 bar)
S = Service switch make/break contact (convertible)

37
High-Pressure Filters with star-pleated strainer inserts
For the filtration of polyurethane components

These high pressure filters To meet the requirements of Please send us the fax on
are used primarily for the reaction injection moulding page 50. We would like to
filtration of polyurethane com- machines MANN+HUMMEL help you determining the
ponents. The filter housings has developed special inserts. optimal filter for your special
are the same as on page 34 application.
to 37.

Technical Data
Filter fineness: 25 to 200 µm
Nominal flow rate: 25 to 175 l/min
Operating pressure: maximum 400 bar (40 MPa)
Operating temperature: -25 °C to +120 °C
Material: Filter head: cast iron with spheroidal graphite
Filter can: steel (also chemically nickeled)
Insert:
Collapse-/burst pressure as per ISO 2941: max. 45 bar (4.5 MPa)

38
High-Pressure Filters with star-pleated strainer inserts
Nominal pressure 400 bar (40 MPa)

• Filter size: 0.2 l

• Filter surface: 540 cm2
• Weight: approx. 4,9 kg

G 3/4 G 3/4
View X
M 10, 20 deep 168
ø 100

38
15
SW 36 75
6 kt removal clearance
12 18 ø 78

Type 300
Housing

Order numbers Volume Material

Housing Head/Can

62 300 30 931 0.2 l Gray cast iron/St-painted

Gray cast iron/St-chem.
62 300 30 935 0.2 l
nickeled

Suitable star-pleated strainer inserts

Order numbers Mesh2) Material of Nominal flow rate1)

mm strainer [l/min]

62 301 50 692 0.03 St 25

62 301 50 695 0.03 VA 25
62 301 52 692 0.06 St 40
62 301 52 695 0.06 VA 40
62 301 53 692 0.1 St 50
62 301 53 695 0.1 VA 50
62 301 55 692 0.2 St 100
62 301 55 695 0.2 VA 100
1) Flow rates apply to liquids with a viscosity of 100 mm2/s (cSt) at a flow resistance of 0.2 bar (20 KPa).
2) Other mesh sizes upon request.

39
High-Pressure Filters with star-pleated strainer inserts
Nominal pressure 400 bar (40 MPa)

• Filter size: 0.6 l

• Filter surface: 1,520 cm2
• Weight: approx. 6.3 kg X

G 3/4 G 3/4

268
View X ø 100
M 10, 20 deep

38
15
SW 36 175
removal clearance
4 kt
12 18 ø 75

Type 302
Housing

Order numbers Volume Material

Housing Head/Can

62 300 30 991 0.6 l Gray cast iron/St-painted

Gray cast iron/St-chem.
62 300 30 995 0.6 l
nickeled

Suitable star-pleated strainer inserts

Order numbers Mesh2) Material of Nominal flow rate1)

mm strainer [l/min]

62 302 50 132 0.03 St 35

62 302 50 135 0.03 VA 35
62 302 52 132 0.06 St 55
62 302 52 135 0.06 VA 55
62 302 53 132 0.1 St 60
62 302 53 135 0.1 VA 60
62 302 55 132 0.2 St 120
62 302 55 135 0.2 VA 120
1) Flow rates apply to liquids with a viscosity of 100 mm2/s (cSt) at a flow resistance of 0.2 bar (20 KPa).
2) Other mesh sizes upon request.

40
High-pressure filters with star-pleated strainer inserts
Nominal pressure 400 bar (40 MPa)

• Filter size: 2.4 l

• Filter surface: 5,500 cm2

View X 152

49 55

Inlet G 11/2 Outlet

100 M 12 144
25 min
deep

20 439

ø 110

Example:

We look for a corrosion-free Order number Housing:

SW 36
filter for a flow rate of 50 l/min 62 302 30 995 removal clearance
(at 100 mm2/s), filter fineness chem. nickeled, see page 40 approx. 300 mm
60 µm.
Order number Insert:
62 302 52 135
Strainer VA, see page 40

Type 506
Housing

Order numbers Volume Material

Housing Head/Can

62 506 30 991 2.4 l Gray cast iron/St-painted

Gray cast iron/St-chem.
62 506 30 995 2.4 l
nickeled

Suitable star-pleated strainer inserts

Order numbers Mesh2) Material of Nominal flow rate1)

mm strainer [l/min]

62 506 52 105 0.06 VA 150

62 506 53 105 0.1 VA 175
1) Flow rates apply to liquids with a viscosity of 100 mm2/s (cSt) at a flow resistance of 0.2 bar (20 KPa).
2) Other mesh sizes upon request.

41
42
Technical service

43
Excellent service

A wide spectrum of services

go hand in hand with a first
class range of products. With
MANN+HUMMEL as your
partner you can be sure that
during and after the purchase
of your filter system you will
be looked after by our filtra-
tion specialists. We fine tune
our service package espe-
cially to meet your needs.
Professional consultation
and customer care form the
basis for high efficiency,
process reliability and eco-
nomy of the filter system.

Consultation and on-site

tests

The choice of the right filter • on-site analysis of opera-

system for your filtration ting conditions carried out
needs depends on many by a MANN+HUMMEL
parameters. A process service technician
analysis beforehand and • MANN+HUMMEL labora-
field trials supervised by us tory analysis of the dirt
are an important part of the spectrum
service we offer our custo- • short-term use of a mobile
mers. test bench to select the
In this way we can guaran- ideal filter system
tee the most suitable and • long-term use of samples
economic solution for your or prototypes for testing
application. Depending on purposes enable system
the complexity of your re- optimisation
quirements we recommend
the following services:

44
Excellent service

On-site installation Service contracts

and commissioning

The ideal fine tuning of the A service contract with A regular filter service offers • use of original spare parts
filter to your requirements is MANN+HUMMEL offers you you the following advanta- for MANN+HUMMEL pro-
ensured by the installation the maximum reliability of ges: ducts and other brands
and startup carried out by operation. Our service offer • high process reliability • ideal operating conditions
our experts. During filter start- not only covers our own fil- • filter guarantee for the and good economy
up we train your operating ters, but also includes other duration of the contract, • transparent filter operating
personnel in your company brands. The result is you can i.e. we ensure the filter costs and return on invest-
on how to handle the filter. have all your production line functions during the con- ment
filters serviced by one spe- tract period without extra • an easy solution for you
cialist. Together with you we costs for you. since you can rely on
draw up the service intervals. MANN+HUMMEL as our
customer.

Corrective maintenance Customised operating and

maintenance instructions
We offer - Corrective mainte-
nance on demand - to those On request we offer
customers not wishing to opt customised operating and
for regular servicing within maintenance manuals to
the scope of a service con- customers who have inte-
tract. We can carry out this grated our filter system in
work at your company or in their production lines.
our plant and promise you
quick reaction times. Service consultation

Rented filters We will send a specialist free

of charge to your company
Renting instead of purcha- to advise you and analyse
sing is the preferred solution your situation. Call us and
for customers wishing to test arrange an appointment.
a filter or who only need the
filter from time to time. The
renting price covers on-site
commissioning and regular
servicing carried out by our Contact
MANN+HUMMEL service
department. Tel.: + 49 6232 53 8265
Fax: + 49 6232 53 8370
Email: [email protected]

45
46
Useful information

47
Viscosity/temperature chart

Examples of commercial, (Characteristic curves for

single-grade engine oils, motor oils are shown in
hydraulic and ATF oils broken lines for ease of
identification)

mm2/s
2 000 000

1 000 000
500 000
300 000
200 000

100 000
70 000
50 000

30 000
20 000

10 000
7 000
5 000
4 000
3 000

2 000
1 500

1 000
800
700
600
500
400

300
AT
F
200 oil
HD
Viskosity

150 40
en
gi
100 ne
90 oi
80
l
70
60
50
HD
40 HD
30
10 en
30
W gi
en ne
gin oi
25
e l
oil
20 IS
O
17 VG
15 10
14 0
13 (H
12 -L
P
11 10
10 0)
9 IS
O
8 VG
IS 32
7 O
VG (H
-L
6 22 P
(H 32
-L )
P
5 22
)
4.5

4.0

3.5

3.0
2.8

-10 -5 0 +5 +10 15 20 25 30 35 40 45 50 60 70 80 90 100°C

100°F 130°F 210°F

48
Viscosity/temperature chart

Examples of commercial, (Characteristic curves for

multi-grade engine oils, motor oils are shown in
cutting and heating oils broken lines for ease of
identification)

mm2/s
30 000

20 000

10 000
7 000
5 000
4 000
3 000

2 000
Ex Oi
1 500 tra l fo
he rs
1 000 up
av er
800 y he
700 he at
600 at ed
500 in ste
g am
400 oi
l( cy
300 Bu lin
nk de
er rs
200 C US
)
fu
150 el
oi
l,
100 gr
ad
90 e
80 Mu 6
70 ltig
60 ra
de
50 oil
Viskosity

40
C
ut Mu
30 tin M
g ltig ult
25 oi ra igr
l de ad
oil e
20 oil
20
17 W
-5
15 0
14
13 15
12 W
11 -4
10 0
10
W
9 -3
8
0
G
as

7
oi
l

R
an
6 ge
Ke of
ro fu
se
US

5 ne el
oi
he

4.5 ls
at
in
g

4.0
oi
l,
gr
ad

3.5
e
2

3.0
2.8

Di
2.5 es
el EL
2.3 fu
el he
at
in
g
2.0 oi
l

1.7

1.5

-10 -5 0 +5 +10 15 20 25 30 35 40 45 50 60 70 80 90 100°C

100°F 130°F 210°F

49
Configuring the size of filters for liquids

Fax to: c o p y,
fill ou
t and
FILTERWERK Fax N fax
o. +49
MANN+HUMMEL GMBH (62 32
) 53 –
Geschäftsbereich Industriefilter, Dept. IF-V1 81 50
67323 Speyer, Germany

Please send us information on a filter for liquids for the following application:

• Use/process:

• Liquid to be filtered (if known, indicate manufacturer and name):

• Viscosity at °C: • pH:

• Nominal flow rate: • Required service life:

• Contamination (g/l or g/work piece):

• Type of contamination:

• Operating pressure of installation: • Max. perm. working pressure:

• Max. perm. differential pressure: • Max. perm.working temperature:

• Type of impurities:

• Form of impurities: (i.g. swarf of various forms):

• Max. perm. particle size on filtered fluid side or filter rating:

• Other:

Please submit a proposal for the following services:

Consultation at installation site Test installation

Series of on-site tests Assembly and start-up
Product-oriented training Product-oriented training

Company

Name

Department

Street

Postal code/City

Country

Telephone

Mobile phone

Fax

e-mail

50
Conversion factors

Temperature °F = (°C x 9/5) + 32

°C = (°F – 32) x 5/9

Flow rates 1 litre/min = 0.0353 cfm

1 m3/min = 35.3140 cfm
1 m3/h = 0.5886 cfm
1 Engl. gallon/min = 0.1605 cfm

Length 1 m = 1000 mm = 39.38 inch = 3.281 ft.

1 inch = 25.4 mm = 0.0254 m = 0.08333 ft.
1 ft. = 304.8 mm = 0.3048 m = 12 inch

Volume 1 m3 = 1000 litres = 35.31 ft.3 = 61020 inch3

1 ft.3 = 28.32 litres = 0.02832 m3 = 1728 inch3
1 litre = 0.2642 US gallon = 0.2201 Engl. gallon
1 US gallon = 3.785 litres = 231 inch3
1 Engl. gallon = 4.544 litres = 277 inch3

Weight 1 kg = 2.205 lb = 35.27 Oz

1 lb = 0.4536 kg = 16 Oz
1 Oz = 0.02835 kg = 0.0625 lb

Pressure 1 bar = 100 KPa = 14.5 psi = 401.5 IN. H2O

10 mbar = 1 KPa = 0.145 psi = 4.015 IN. H2O
10 psi = 68.95 KPa = 0.6895 bar = 27.68 IN. H2O
1 IN. H2O = 0.2491 KPa = 2.491 mbar = 0.03613 psi

Annotation to the filter specifications

1. Guidelines for pressure 2. Nominal flow rates
devices: filter may only be operated The specified nominal flow application are decisive for
MANN+HUMMEL filters con- with liquids according to rates are calculated values the actual nominal flow rate.
form to the European Pressure PED 97/23/EG diagram 4. which cannot be guaranteed
Equipment Directive 97/23/EG. For other liquids and their for the given general conditi-
The project drawing is decisive gases our filter specialists can ons. The calculation is made
for the specifications. In the carry out a risk analysis with without safety margins. The
absence of special details the you according to the guidelines. parameters which arise in the

51
Further information on our products is obtainable
under the following brochure titles:

Air cleaners Liquid filters Process filters Air/oil separator elements

" Single stage air cleaners " Spin-on filters " Automatic filters " Standard wrap elements
" Two stage air cleaners " Fuel filters " Gap-type filters " Depth Separator element
" Vacuum filters " Filter elements for liquid " High pressure filters " Air-oil separator boxes
" Filters for two-way venti- filters " Air-oil separator filters
lation " In-line filters
" Oil-wetted air cleaners " Suction filters
" Oil bath air cleaners " Two-way ventilation filters
" Accessories, e.g. supports,
sludge outlet valves, service
switches, etc

52
International locations
„Made by MANN+HUMMEL“, worldwide.
• Locations
• Licensees

• FILTERWERK MANN+HUMMEL GMBH, Ludwigsburg (Germany) • FILTROS MANN S.A. de C.V., Tlalnepantla (Mexiko)
• FILTERWERK MANN+HUMMEL GMBH, Marklkofen (Germany) • FILTERWERK MANN+HUMMEL GMBH, Warsaw (Poland)
• FILTERWERK MANN+HUMMEL GMBH, Speyer (Germany) • MANN+HUMMEL FILTER TECHNOLOGY (S.E.A.) PTE LTD,
• FILTERWERK MANN+HUMMEL GMBH, Sonneberg (Germany) (Singapore)
• MANN+HUMMEL ProTec GmbH, Königswinter (Germany) • FILTROS MANN S.A., Saragossa (Spain)
• MANN+HUMMEL ProTec GmbH, Ludwigsburg (Germany) • G.U.D. MANN+HUMMEL FILTER SYSTEMS (PTY) LTD,
• MANN+HUMMEL ProTec GmbH, Weiterstadt (Germany) Atlantis (South Africa)
• MANN+HUMMEL HYDROMATION GMBH, Ludwigsburg (Germany) • MANN+HUMMEL (CZ) s.r.o., Nová Ves
• MHB FILTRATION GMBH+CO. KG, Erkrath (Germany) (Czech Republic)
• FILTROS MANN S.A., Buenos Aires (Argentina) • MANN+HUMMEL FILTER TECHNOLOGY, INC.,
• MANN AND HUMMEL AUSTRALIA PTY LIMITED, Greensboro, NC (USA)
Sydney (Australia) • UNIVERSAL DYNAMICS, INC., Woodbridge, VA (USA)
• MANN+HUMMEL HYDROMATION N.V., Tongeren (Belgium) • MANN+HUMMEL AUTOMOTIVE, INC., Bloomfield Hills,
• FILTROS MANN LTDA., Indaiatuba (Brazil) MI (USA)
• FILTERWERK MANN+HUMMEL GMBH, Shanghai (China) • MANN+HUMMEL ADVANCED FILTRATION CONCEPTS, INC.,
• HYDROMATION FRANCE S.A.R.L., Paris (France) Louisville, KY (USA)
• MANN+HUMMEL FRANCE S.A.R.L., Argenteuil (France) • MANN+HUMMEL AUTOMOTIVE, INC., Portage, MI (USA)
• MANN+HUMMEL (UK) LTD.,
Wolverhampton (United Kingdom)
• MANN+HUMMEL (UK) LTD., Ilminster (United Kingdom) • J. Riveros S.A.I.C., Santiago (Chile)
• MANN+HUMMEL JAPAN LTD., Yokohama (Japan) • G.U.D. Filters Pty. Ltd., Durban (South Africa)

53
Notes

54
The Group
The MANN+HUMMEL Automotive Technology Division
Group has its head offices
in Ludwigsburg in the
German state of Baden- Air Filter Systems Liquid Filter Systems Filters Business Unit (AM)
Württemberg close to the Business Unit Business Unit • Filter elements for air and
state capital of Stuttgart. • Air cleaners and air filter • Plastic and aluminum liquid liquids, and cabin filters
systems for automobiles filter systems for auto- (MANN-FILTER)
MANN+HUMMEL is repre- and commercial vehicles mobiles and commercial • Cabin filters for particle
sented in 30 locations all • Components, e.g. mufflers, vehicles filtration and gas adsorption,
over the world and its control cabinets, heating • Components, e.g. integrated and combined filters for
workforce consists of pipes, control valves, oil-water heat exchangers automobiles and commer-
approximately 8,000 design covers • Oil sumps, valves cial vehicles
employees. • Crankcase ventilation • Air-drying boxes
systems • Cooling-water filters
The automotive industry, • Spin-on oil filters and fuel
mechanical engineering filters
and the plastics proces- Intake Manifold Systems • Elements for oil mist
sing industry are among Business Unit separators
the international customers • Engine intake manifolds,
of MANN+HUMMEL. intake manifold modules
To meet the different and systems made of
requirements of all these plastic and metal for auto
customers efficiently, mobiles and commercial
MANN+HUMMEL is divided vehicles
into seven business units. • Components for auto-
mobiles and commercial
vehicles, e.g. fuel rails, oil
mist separators, cylinder
head covers

Industrial Technology Division

Industrial Filters Business ProTec Business Unit Hydromation Business Unit

Unit • Installations, equipment • Systems and equipment,
• Air and liquid filters for and systems for materials e.g. chip handling systems
industrial engines, con- handling and material pre and chip conveying
struction and agricultural paration in the plastic, systems for filtering
machinery, compressors rubber, recycling and machining liquids in
• Air-oil separators for chemical industries mechanical production
compressed air systems • Oil extraction devices
• Process filters for
mechanical engineering
19 942 10 701 en 0402 Printed in Germany

and process technology

• Cabin filters

FILTERWERK MANN+HUMMEL GMBH

Business Unit Industrial Filters
D-67323 Speyer
Phone +49 (62 32) 53–80, Fax +49 (62 32) 53–88 99
e-mail: [email protected], Internet: www.mann-hummel.com/industrial-filters