Scribd
Upload
141 views1 page

En353 3753 5948

This test certificate summarizes the results of tests conducted on a U-block holder forging produced by M.E. Forge Tech for ETA Technology. Key details include the forging met chemical composition and mechanical property requirements per the EN 353 specification. Non-destructive ultrasonic testing found no flaws exceeding 3mm. The forging is stamped with identification and meets drawing and specification requirements.

Uploaded by

K.s. Raghavendra Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
141 views1 page

En353 3753 5948

This test certificate summarizes the results of tests conducted on a U-block holder forging produced by M.E. Forge Tech for ETA Technology. Key details include the forging met chemical composition and mechanical property requirements per the EN 353 specification. Non-destructive ultrasonic testing found no flaws exceeding 3mm. The forging is stamped with identification and meets drawing and specification requirements.

Uploaded by

K.s. Raghavendra Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

M.E.

FORGE TECH
Plot No 234,11th Main 3rd Cross ,3rd Phase
Peenya Industrial Area
Bangalore-560 058

TEST CERTIFICATE
TC No: 5948 Dt. 26.2.2020 Inv No: 5948 Dt. 26.2.2020
Customer : ETA TECHNOLOGY PVT LTD Type of forging : Open
484-D, 13th cross, IV phase . PIA. Component :
Bangalore-560058 U- BLOCK HOLDER - 192 X 147 X 125
P O Ref : 1912594/19-20/24.2.2020 M-WF-179-03-00-04-RM
W.O.No: 79409 Qty : 01 No.
Raw Material Details : 3. Test Cetificate No. : SM26084
1. Supplier:JNIL 4. Specification : En 353
2. Size : Dia 250 mm 5. Heat No/Batch No. : N804875/3753
Chemical Analysis in Percentage.
C Mn Si S P Ni Cr Mo
As per spec Min. - 0.5 - - - 1.0 0.75 0.08
As per spec Max. 0.20 1.00 0.35 0.050 0.050 1.50 1.25 0.15
Obtained 0.170 0.678 0.197 0.007 0.011 1.465 1.029 0.205
HEAT TREATMENT
Process Temperature Deg C Soak time hrs Cooling media
Normalising 880 3.00 Air

Mechanical Properties : at Room Temperature


YS TS %Elong %Red Hardness
N/mm2 N/mm2 GL =4d in Area BHN
Min 175
Max 220
Test value 184-190 BHN
NDT - Ultrasonic Testing
Condition of Surface : Proof Machined
Testing standard : SA 388
Acceptance level : For 3 mm FBH
Inference : Found satisfactory,
Identification Details : MEFT / EN353/ Punched on all Forgings
We hereby certify that the items mentioned above has been tested and inspected in our presence and are found to be in
accordance with the drawings and satisfy the requirements of the specifications.

for M.E.FORGE TECH

Raghavendra Kumar K.S


Quality Incharge

You might also like