Scribd
Upload
62 views1 page

Certificado TACO ANCLAJE ZN 3.8

This document provides the results of dimensional testing on drop in anchors. It tested samples of 3/8, 1/2, and 5/8 inch anchors, measuring the diameter and length of each against specifications. The test found that all sample measurements were within the acceptable tolerances for both diameter and length across all tested anchor sizes.

Uploaded by

Juan Carlos Laurie Figueroa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

Certificado TACO ANCLAJE ZN 3.8

This document provides the results of dimensional testing on drop in anchors. It tested samples of 3/8, 1/2, and 5/8 inch anchors, measuring the diameter and length of each against specifications. The test found that all sample measurements were within the acceptable tolerances for both diameter and length across all tested anchor sizes.

Uploaded by

Juan Carlos Laurie Figueroa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Comercializadora Proveper Ltda.

RUT 78.844.680-2
Mapocho 4041 - Quinta Normal
Santiago - Chile
Dimensional Test Results
ORGANIZATION: PART NUMBER:
SUPPLIER/VENDOR CODE: PART NAME: Drop in Anchor
NAME OF INSPECTION FACILITY: DESIGN RECORD CHANGE LEVEL: 0
ENGINEERING CHANGE DOCUMENTS: N/A

QTY. NOT
ITEM SPECIFICATION / DIMENSION ORGANIZATION MEASUREMENT RESULTS (DATA) OK
TESTE OK

TESTING SIZE

Drop in Anchor

1 3/8 d=3/8-16UNC 6 OK OK OK OK OK OK OK

B mm 12.00 6 11.77 11.78 11.78 11.77 11.78 11.79 OK

L mm 40.00 6 39.66 39.53 39.97 39.60 39.49 39.45 OK

2 1/2 d=1/2-13UNC 6 OK OK OK OK OK OK OK

B mm 16.00 15.77 15.78 15.77 15.78 15.77 15.76 OK

L mm 50.00 6 50.20 50.25 49.72 50.31 50.27 50.26 OK

3 5/8 A=5/8-11UNC 6 OK OK OK OK OK OK OK

B mm 20.00 6 19.65 19.63 19.65 19.64 19.62 19.66 OK

L mm 65.00 6 64.26 63.55 64.60 64.64 64.70 64.68 OK

REMARK:
SIGNATURE TITLE DATE

Quality Engineer

You might also like