26.

19 · Technical amendments reserved

! 99 479
Pole top luminaire 2 r IP 66

Project · Reference number Date

15°

75
76

7000 - 9000
340

1200
1500
520
1215

Product data sheet

Application Lamp Inrush current

LED pole top luminaire with asymmetrical flat Module connected wattage 2x 62 W Inrush current: 8 A / 100 µs
beam light distribution. Luminaire connected wattage 138 W Maximum number of luminaires of this
The asymmetrical and flat beam light distribution Rated temperature ta = 25 °C type per miniature circuit breaker:
is suitable especially for the illumination of Ambient temperature ta max = 50 °C B 10 A: 13 luminaires
streets according to DIN EN 13201. B 16 A: 22 luminaires
For mounting heights 7000 - 9000 mm. 99 479 K4 C 10 A: 13 luminaires
Module designation 8x LED-0847/840 C 16 A: 22 luminaires
Product description
Colour temperature 4000 K
Luminaire made of aluminium alloy, Article No. 99 479
Colour rendering index CRI > 80
aluminium and stainless steel LED colour temperature optionally 4000 K
Module luminous flux 24760 lm
BEGA Unidure® coating technology or 3000 K
Luminaire luminous flux  19770 lm
Safety glass, antireflection-coated 4000 K – Article number + K4
Luminaire luminous efficiency  143,3 lm / W
Silicone gasket 3000 K – Article number + K3
Reflector made of pure anodised aluminium
Toolless closure 99 479 K3 Colour graphite or silver
For pole top ø 76 mm Module designation 8x LED-0847/830 graphite – article number
Inner diameter of the pole min.62 / max.70 mm Colour temperature 3000 K silver – article number + A
Slip fitter insert depth 100 mm Colour rendering index CRI > 80
Module luminous flux 24080 lm Accessories
2 x Connecting cable X05BQ-F 4 × 1@ For this luminaire we recommend the following
Cable length 10 m Luminaire luminous flux  19227 lm
Luminaire luminous efficiency  139,3 lm / W BEGA luminaire poles:
LED power supply unit
220-240 V x 0/50-60 Hz Service life of the LED Tapered aluminium poles,
DC 176-264 V Ambient temperature ta = 25 °C lacquered with access door and C-clamp
During DC operation the LED power – at > 500,000 h: L 70 B 50 70 917 Pole with anch.section H 7000 mm
is reduced to 50 % 70 726 Pole with anch.section H 8000 mm
DALI controllable max. ambient temperature ta = 50 °C Tapered steel poles without visible welding
A basic isolation exists between power cable – at 165,000 h: L 70 B 50 seam · hot-dip galvanised and lacquered
and control line with access door and C-clamp
BEGA Thermal Control® Light technique
Luminaire data for the light planning program 70 835 Pole with anch.section H 7000 mm
Temporary thermal regulation to protect 70 836 Pole with anch.section H 8000 mm
temperature-sensitive components without DIALux for outdoor lighting, street lighting and
indoor lighting as well as luminaire data in 70 837 Pole with anch.section H 9000 mm
switching off the luminaire
Safety class II 2 EULUMDAT- and IES-format you will find on the Tapered steel luminaire poles
Protection class IP 66 BEGA web page www.bega.com. longitudinally seam-welded · hot-dip galvanised
Dust-tight and protection against strong water and lacquered with access door and C rail
jets 71 004 Pole with anch.section H 7000 mm
Impact strength IK08 71 006 Pole with anch.section H 8000 mm
Protection against mechanical 71 008 Pole with anch.section H 9000 mm
impacts < 5 joule
r – Safety mark For suitable connection boxes please see the
c  – Conformity mark instructions for use of the luminaire poles.
Horizontal wind catching area: 0.09 m²
Weight: 16.2 kg

Light distribution
16 99 479
LED
H = 9,0 m
12

8
lx
4
25 10 5 2 1 0,5
0

m 0 4 8 12 16 20 24 28 32 36 40

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · [email protected] · www.bega.com