Marine Applications

Diesel Engine Ratings

Nothing Runs Like A Deere™

John Deere PowerTech™ engines are as powerful in the CONTENTS

water as they are on the land. Our marine propulsion and
Meeting regulations around the world ........................... 4
generator engines share the same reputation for
performance and reliability that their agricultural and Dimensions and weights .................................................. 5
industrial counterparts have enjoyed for decades. They Engine identification ................................................. 6 – 7
are also backed by a vast service network that will keep
you operating — no matter where you go. Propulsion M ratings ................................................ 8 – 9
Propulsion power ratings .........................................10 – 11
When you choose John Deere, you get the support of one
of the strongest engine and equipment companies in the PowerTech 4.5L marine engines .............................. 12 – 13
world. See for yourself why more vessels are powered by PowerTech 6.8L marine engines ............................. 14 – 15
John Deere.
PowerTech 9.0L marine engines ............................. 16 – 17
PowerTech 13.5L marine engines ............................. 18 – 19
Generator and constant-speed auxiliary engines.... 20 – 23
Variable-speed auxiliary engines ........................... 24 – 25
Customer support ........................................................ 26

2 3
Meeting regulations
around the world Dimensions and weights

John Deere marine engines comply with international,

European, and United States emissions standards for
regulated vessels. John Deere meets U.S. Environmental
Protection Agency (EPA) Marine Tier 3 emissions
regulations with a complete line of PowerTech engines

HEIGHT
for newly constructed vessels as well as repowered boats.

Engines for non-regulated territories

In addition to the engines for various emissions
regulations mentioned, John Deere offers engines for
the non-regulated regions throughout the world. WIDTH LENGTH

Marine classification societies Engine dimensions and weights listed in this guide use
the following variables:
John Deere provides a full line of marine engines
designed to meet the requirements of the various Length mm (in) = length to rear face of flywheel housing
marine classification societies. Width mm (in) = maximum width minus width of elbow
Height mm (in) = crank centerline to top plus crank
centerline to bottom
Weight kg (lb) = with oil, no coolant – includes engine,
flywheel, and electronics

Dimensions may vary according to options selected. Contact your

ABS distributor for more information. All specifications are at rated
TYPE APPROVAL PROGRAM speed and power with standard options unless otherwise noted.

4 5
Engine identification

Model designation key

A John Deere marine engine model designated as 6135SFM85
is a 6-cylinder, 13.5-liter turbocharged and aftercooled,
air-to-seawater engine that is emissions regulated.

Factory manufactured by
RG Waterloo, Iowa, USA
CD Saran, France
PE Torreón, Mexico

Number of cylinders and total displacement

6135 6 cylinders, 13.5 liters
6090 6 cylinders, 9.0 liters
6068 6 cylinders, 6.8 liters
4045 4 cylinders, 4.5 liters

Engine serial number

Emissions
50 Non-emissions regulated
70, 75, 76, 85 Emissions regulated

Engine type
M Marine

User type
F OEM (John Deere Power Systems)

6 135 S Air intake system

D Naturally aspirated
Indicates air intake system T Turbocharged
Displacement in liters A Turbocharged and aftercooled, air-to-engine coolant
Number of cylinders S Turbocharged and aftercooled, air-to-seawater*
H Turbocharged and aftercooled, air-to-air

*S engines can be modified to be turbocharged and aftercooled,

air-to-engine coolant, in dual-circuit keeled-cooled applications.
Contact your John Deere engine distributor.
6 7
Marine propulsion M ratings

Ratings are based on the ISO 8665/SAE J1225 standard Typical Typical Typical full power
M rating
power rating and the ISO 3046/SAE J1995 crankshaft power load factor annual usage operation
rating. The M rating definitions are provided as a guide to M1 > 65% Unrestricted Uninterrupted
M2 ≤ 65% 3,000 – 5,000 hr 16 of each 24 hr
help in the selection of the engine that best fits the
M3 ≤ 50% 2,000 – 4,000 hr 4 of each 12 hr
application requirements. It is recommended to consult a M4 ≤ 40% 1,000 – 3,000 hr 1 of each 12 hr
John Deere marine dealer or engine distributor to verify the M5 ≤ 35% Up to 1,000 hr 0.5 of each 8 hr
optimal rating for the specific application.

* Load factor is the actual fuel burned

The M1 rating is for marine propulsion applications that may Possible applications: Line hauls over a period of time divided by the
operate up to 24 hours per day at uninterrupted full power and tugs and towboats, fish and full-power fuel consumption for the
M1 have load factors* greater than 65 percent. shrimp trawlers/draggers, and same period of time. For example, if an
displacement hull fishing boats. engine burns 160 liters of fuel during
an eight-hour run, and the full-power
The M2 rating is for marine propulsion applications that Possible applications: fuel consumption is 60 liters per hour,
typically operate between 3,000 to 5,000 hours per year and Short-range tugs and towboats, the load factor is 160 liters / (60 liters
have load factors* up to 65 percent. This rating is for long-range ferryboats, large per hour x 8 hours) = 33.3 percent.
M2 applications that are in continuous use and use full power for passenger vessels, and offshore † C ruising is any operating time where
no more than 16 hours of each 24 hours of operation. The displacement hull fishing boats. the engine speed is more than 200 rpm
less than the maximum attainable
remaining time of operation is at or below cruising† speed. engine speed.
The M3 rating is for marine propulsion applications that Possible applications: Coastal
typically operate between 2,000 to 4,000 hours per year and fishing boats, offshore crew
have load factors* up to 50 percent. This rating is for boats, research boats, short
M3 applications that use full power for no more than four hours range ferryboats, and dinner
out of each 12 hours of operation. The remaining time of cruise boats.
operation is at or below cruising† speed.
The M4 rating is for marine propulsion applications that Possible applications: Inshore
typically operate between 1,000 to 3,000 hours per year and crew boats, charter fishing
have load factors* below 40 percent. This rating is for boats, pilot boats, dive boats,
M4 applications that use full power no more than one hour out of and planing hull commercial
each 12 hours of operation. The remaining time of operation is fishing boats.
at or below cruising† speed.
The M5 rating is for marine recreational propulsion and Possible applications:
certification for light-duty commercial Tier 3 applications that Recreational boats, tactical
operate up to 1,000 hours per year and have load factors* military vessels, and rescue
M5 below 35 percent. This rating is for applications that use full boats.
power for no more than 30 minutes out of each eight hours.
The remaining time of operation is at or below cruising† speed.
8 9
Marine engine
propulsion power ratings

Propulsion power ratings — IMO compliant and non-certified engines

Engine Power rating
4045DFM70 60 kW (80 hp)
4045TFM50 90 – 112 kW (120 – 150 hp)
6068TFM50 115 – 168 kW (154 – 225 hp)
6068TFM75 118 – 150 kW (158 – 201 hp)
6068AFM75 172 – 246 kW (230 – 330 hp)
6068SFM75 186 – 298 kW (249 – 400 hp)
6090AFM75 213 – 317 kW (285 – 425 hp)
6090SFM75 242 – 410 kW (325 – 550 hp)
Ratings are subject to change. Please contact kW 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
your John Deere marine dealer for details. hp 0 34 67 101 134 168 201 235 268 302 335 369 402 436 469 503 536 570 603 637 670 704 738 771 805

Propulsion power ratings — IMO & EPA compliant engines

Engine Power rating
4045TFM85 75 – 93 kW (100 – 125 hp)
4045AFM85 119 – 168 kW (160 – 225 hp)
4045SFM85 205 – 235 kW (275 – 315 hp)
6068AFM85 172 – 246 kW (230 – 330 hp)
6068SFM85 186 – 298 kW (249 – 400 hp)
6090AFM85 213 – 317 kW (285 – 425 hp)
6090SFM85 242 – 410 kW (325 – 550 hp)
6135AFM85 272 – 429 kW (365 – 575 hp)
6135SFM85 317 – 559 kW (425 – 750 hp)
Ratings are subject to change. Please contact kW 0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600
your John Deere marine dealer for details. hp 0 34 67 101 134 168 201 235 268 302 335 369 402 436 469 503 536 570 603 637 670 704 738 771 805

10 11
PowerTech
4.5L marine engines

–– Keel-cooled or heat exchanger configurations Emissions Rated Rated Rated fuel

Engine power speed consumption
–– Naturally aspirated, turbocharged non-aftercooled, or model
IMO EPA EU RCD kW hp rpm L/hr gal/hr
turbocharged with air-to-seawater or air-to-coolant IMO compliant and non-certified engines
aftercooling 4045DFM70
M2 EX - III A - 60 80 2500 17.5 4.6
–– Feature constant power to 400 rpm below rated speed 4045TFM50
–– Excellent choice for launches, work boats, trawler M2* EX - - - 90 120 2400 22.7 6.0
M3* EX - - - 101 135 2500 26.3 6.9
yachts, and patrol craft M4 EX - - - 112 150 2600 29.7 7.8
IMO & EPA compliant engines
4045TFM85
M1 EX Tier 3 III A RCD II 75 100 2400 21.4 5.7
M2 EX Tier 3 III A RCD II 93 125 2500 29 8
4045AFM85
M1 Tier 2 Tier 3 III A RCD II 119 160 2300 33.2 8.8
M2 Tier 2 Tier 3 III A RCD II 134 180 2400 37 10
M3 Tier 2 Tier 3 III A RCD II 149 200 2500 44 12
M4 Tier 2 Tier 3 III A RCD II 168 225 2600 49 13
4045SFM85
M4 Tier 2 Tier 3 III A RCD II 205 275 2600 54 14
M5 Tier 2 Tier 3 III A RCD II 235 315 2800 62 16
EX = MARPOL Annex VI exempt *Not available in all countries.

Length, to Width Height Weight, dry

Engine rear of block
model
mm in mm in mm in kg lb
4045DFM70† 756 29.8 703 – 731 27.7 – 28.8 901 35.4 437 963
4045TFM50 748 29.4 703 27.7 912 35.9 461 1,017
4045TFM85† 739 29.1 692 – 703 27.3 – 27.6 912 35.9 507 1,117
4045AFM85 752 29.6 692 – 771 27.3 – 30.4 964
†
37.9 578 1,274
4045SFM85 762 30.0 820 32.3 922 36.2 558 1,230
†
Engine configuration may vary.

12 Specifications are subject to change. 13

PowerTech
6.8L marine engines

–– Keel-cooled or heat exchanger configurations Emissions Rated Rated Rated fuel

Engine power speed consumption
–– Turbocharged non-aftercooled, or turbocharged with model
IMO EPA EU RCD kW hp rpm L/hr gal/hr
air-to-seawater or air-to-coolant aftercooling IMO compliant and non-certified engines
–– Excellent choice for recreational boats, launches, 6068TFM75
M1 EX - III A - 118 158 2400 33.7 8.9
work boats, trawler yachts, and patrol craft M2 Tier 2 - III A - 133 178 2500 38.3 10.1
M3 Tier 2 - III A - 150 201 2600 44.1 11.6
6068TFM50
M1 EX - - - 115 154 2300 29.6 7.8
M2 - - - - 130 175 2400 34.7 9.2
M3 - - - - 149 200 2500 38.8 10.3
M4 - - - - 168 225 2600 44.3 11.7
6068AFM75
M1 Tier 2 - III A - 172 230 2300 43.7 11.6
M2 Tier 2 - III A - 198 265 2400 50.0 13.0
M3 Tier 2 - III A - 224 300 2500 57.0 15.0
M4 Tier 2 - III A - 246 330 2600 64.0 17.0
6068SFM75
M1 Tier 2 - III A - 186 249 2400 47.2 12.5
M2 Tier 2 - III A - 209 280 2500 52.3 13.8
M3 Tier 2 - III A - 239 321 2600 60.2 15.9
M4 Tier 2 - III A - 265 355 2700 66.8 17.7
M5 Tier 2 - III A - 298 400 2800 77.6 20.5
IMO & EPA compliant engines
6068AFM85
M1 Tier 2 Tier 3 III A RCD II 172 230 2300 50.9 13.4
Length, to Width Height Weight, dry M2 Tier 2 Tier 3 III A RCD II 198 265 2400 58.0 15.0
Engine rear of block
model M3 Tier 2 Tier 3 III A RCD II 224 300 2500 65.0 17.0
mm in mm in mm in kg lb M4 Tier 2 Tier 3 III A RCD II 246 330 2600 71.0 19.0
6068TFM75 1004 39.5 712 28.0 882 34.7 730 1609 6068SFM85
6068TFM50 1004 39.5 712 28.0 881 34.7 730 1609 M1 Tier 2 Tier 3 III A RCD II 186 249 2400 51.0 13.0
6068AFM75 1034 40.7 806 – 865 31.7 – 34.0 912
†
35.9 786 1732 M2 Tier 2 Tier 3 III A RCD II 209 280 2500 57.0 15.0
6068SFM75 1034 40.7 872 34.3 959 37.7 890 1962 M3 Tier 2 Tier 3 III A RCD II 239 321 2600 63.0 17.0
6068AFM85† 1034 40.7 806 – 865 31.7 – 34.0 935 36.9 787 1735 M4 Tier 2 Tier 3 III A RCD II 265 355 2700 69.0 18.0
6068SFM85 1034 40.7 872 34.3 931 36.7 763 1682 M5 Tier 2 Tier 3 III A RCD II 298 400 2800 81.0 21.0
†
Engine configuration may vary. EX = MARPOL Annex VI exempt

14 Specifications are subject to change. 15

PowerTech
9.0L marine engines

–– Keel-cooled or heat exchanger configurations Emissions Rated Rated Rated fuel

Engine power speed consumption
–– Turbocharged with air-to-seawater or air-to-coolant model
IMO EPA EU RCD kW hp rpm L/hr gal/hr
aftercooling IMO compliant and non-certified engines
–– 4-valve cylinder head 6090AFM75
M1 Tier 2 - III A - 213 285 2100 56.0 15.0
–– Electronically controlled HPCR fuel system M2 Tier 2 - III A - 242 325 2200 62.0 16.0
M3 Tier 2 - III A - 280 375 2300 76.0 20.0
–– Front or side service M4 Tier 2 - III A - 317 425 2400 86.0 23.0
–– Excellent choice for patrol craft, launches, work boats, 6090SFM75
M1 Tier 2 - III A - 242 325 2100 56.3 14.9
fishing boats, trawler yachts, and sportfishing boats
M2 Tier 2 - III A - 280 375 2200 64.0 17.0
M3 Tier 2 - III A - 317 425 2300 74.0 20.0
M4 Tier 2 - III A - 373 500 2400 88.0 23.0
See your John Deere engine distributor for options to M5 Tier 2 - III A - 410 550 2500 108.0 29.0
combine the high power density of our 9.0L SFM marine IMO & EPA compliant engines
6090AFM85
engines in dual-circuit keel-cooled applications.
M1 Tier 2 Tier 3 III A RCD II 213 285 2100 64.6 17.1
M2 Tier 2 Tier 3 III A RCD II 242 325 2200 71.0 19.0
M3 Tier 2 Tier 3 III A RCD II 280 375 2300 81.0 21.0
M4 Tier 2 Tier 3 III A RCD II 317 425 2400 91.0 24.0
6090SFM85
M1 Tier 2 Tier 3 III A RCD II 242 325 2100 65.4 17.3
M2 Tier 2 Tier 3 III A RCD II 280 375 2200 78.0 21.0
M3 Tier 2 Tier 3 III A RCD II 317 425 2300 87.0 23.0
M4 Tier 2 Tier 3 III A RCD II 373 500 2400 107.0 28.0
M5 Tier 2 Tier 3 III A RCD II 410 550 2500 116.0 31.0
EX = MARPOL Annex VI exempt

Length, to Width Height Weight, dry

Engine rear of block
model
mm in mm in mm in kg lb
6090AFM75 1682 66.2 938 36.9 984 38.8 1011 2229
6090SFM75 1297 51.1 914 36.0 983 38.7 1056 2327
6090AFM85 1297 51.1 938 36.9 983 38.7 1055 2325
6090SFM85 1297 51.1 938 36.9 983 38.7 1056 2327

16 Specifications are subject to change. 17

PowerTech
13.5L marine engines

–– Keel-cooled or heat exchanger configurations Emissions Rated Rated Rated fuel

Engine power speed consumption
–– Turbocharged with air-to-seawater or air-to-coolant model
IMO EPA EU RCD kW hp rpm L/hr gal/hr
aftercooling IMO & EPA compliant engines
–– 4-valve cylinder head 6135AFM85
M1 Tier 2 Tier 3 III A RCD II 272 365 1800 76.7 20.3
–– Feature constant power to 400 rpm below rated speed M2 Tier 2 Tier 3 III A RCD II 317 425 1900 86.0 23.0
M3 Tier 2 Tier 3 III A RCD II 373 500 2000 102.0 27.0
–– Excellent choice for patrol craft, launches, work boats, M4 Tier 2 Tier 3 III A RCD II 429 575 2100 119.0 31.0
fishing boats, trawler yachts, and sportfishing boats 6135SFM85
M1 Tier 2 Tier 3 III A RCD II 317 425 1800 79.5 21.0
M2 Tier 2 Tier 3 III A RCD II 373 500 1900 94.0 25.0
See your John Deere engine distributor for options to M3 Tier 2 Tier 3 III A RCD II 429 575 2000 111.0 29.0
M4 Tier 2 Tier 3 III A RCD II 485 650 2100 124.0 33.0
combine the high power density of our 13.5L SFM marine M5 Tier 2 Tier 3 III A RCD II 559 750 2200 146.0 39.0
engines in dual-circuit keel-cooled applications.

Length, to Width Height Weight, dry

Engine rear of block
model
mm in mm in mm in kg lb
6135AFM85 1316 51.8 990 39.0 1182 46.5 1410 3108
6135SFM85 1335 52.6 990 39.0 1176 46.3 1426 3143

18 Specifications are subject to change. 19

Marine generator drive
and constant-speed
auxiliary engine ratings
The marine generator engine rating is the power available
under normal varying electrical load factors* for an
unlimited number of hours per year in commercial
applications. This rating incorporates a 10 percent overload
capability and conforms to ISO 8528 prime power. Average
load over a 24-hour period shall not exceed 67 percent of
the prime rating, of which no more than two hours are
between 100 percent and 110 percent of the prime rating.
This rating is used for applications that require constant
speed in auxiliary applications.

Conversions
Generator drive rating (kWe)
kWe = [Engine power (kW) -
Fan power loss (kW)]
x Generator efficiency
Note: DFM, TFM, AFM, and SFM generator drive ratings
do not have fan power loss.

Power factor (PF)

PF = kWe/kVA = ___________________
Real power
Apparent power
PF constant = 0.80

Formulas
(Standby power, kWe) =
(Prime power, kWe) x (110% Overload capacity)
* Load factor is the actual fuel burned over a period of time divided by the full-power fuel kWe rating/0.8 = kVA rating
consumption for the same period of time. For example, if an engine burns 160 liters of fuel during
an eight-hour run, and the full-power fuel consumption is 60 liters per hour, the load factor is 160 Estimated electrical power is calculated from the typical generator efficiency
liters / (60 liters per hour x 8 hours) = 33.3 percent. and fan power percentages shown. Applications may vary.
20 21
PowerTech marine generator and
constant-speed auxiliary engines

–– Quiet, smooth operation Emissions Prime power ratings

Engine
–– Preferred provider of generator drive engines worldwide model
IMO EPA kW hp kVA kWe
–– Available in 1500 rpm for 50 Hz and 1800 rpm for 60 Hz 1500 rpm / 50Hz
configurations IMO compliant and non-certified engines
4045DFM70 EX - 40 54 45 36
–– This rating is capable of a 10 percent overload capability 4045TFM50 EX - 57 76 64 51
and conforms to ISO 8528 prime power 4045TFM85 EX - 61 82 69 55
4045AFM85 EX - 89 120 102 82
6068TFM50 EX - 89 119 102 82
6068AFM85 EX - 117 157 132 106
6068AFM85 Tier 2 - 139 187 160 128
6068AFM75 Tier 2 - 139 187 160 128
6068SFM85 Tier 2 - 168 226 188 150
6090AFM75 Tier 2 - 195 261 219 175
6090SFM75 Tier 2 - 222 297 250 200
6090AFM85 Tier 2 - 195 261 219 175
6090SFM85 Tier 2 - 222 297 250 200
6135AFM85 Tier 2 - 278 373 313 250
6135SFM85 Tier 2 - 334 447 375 300
1800 rpm / 60Hz
IMO compliant and non-certified engines
4045DFM70 EX - 46 62 50 40
4045TFM50 EX - 71 95 80 64
6068TFM50 EX - 115 154 124 99
6068AFM75 Tier 2 - 166 223 188 150
6090AFM75 Tier 2 - 222 297 250 200
6090SFM75 Tier 2 - 278 373 313 250
IMO & EPA compliant engines
4045TFM85 EX Tier 3 74 99 81 65
4045TF285 Tier 2 Tier 3 71 95 74 60
4045AFM85 Tier 2 Tier 3 110 148 124 99
4045HF285 Tier 2 Tier 3 117 157 123 99
6068AFM85 Tier 2 Tier 3 166 223 188 150
6068SFM85 Tier 2 Tier 3 195 262 218 175
6090AFM85 Tier 2 Tier 3 222 297 250 200
6090HFM85 - Tier 3 238 319 249 200
6090SFM85 Tier 2 Tier 3 278 373 313 250
6135AFM85 Tier 2 Tier 3 334 447 375 300
6135HFM85 - Tier 3 416 558 436 350
6135SFM85 Tier 2 Tier 3 416 558 469 375
EX = MARPOL Annex VI exempt

22 Specifications are subject to change. 23

PowerTech variable-speed
auxiliary engines

John Deere PowerTech radiator-cooled, dry‑exhaust Emissions Rated power Rated

Engine speed
manifold engines (TF and HF models) are compliant with model
IMO EPA kW hp rpm
EPA Marine Tier 3 emissions regulations* and engineered IMO & EPA compliant engines
to run vessel auxiliaries such as pumps, winches, deck 4045TF285 Tier 2 Tier 3 74 99 2200
cranes, and hydraulics. We also offer a choice of options 6068HF485 Tier 2 Tier 3 187 251 2200
6090HFM85 - Tier 3 242 325 2000
and accessories. 6090HF485 Tier 2 Tier 3 280 375 2200
6135HFM85 - Tier 3 373 500 2000
John Deere PowerTech radiator-cooled, wet-exhaust 6135HF485 Tier 2 Tier 3 448 600 2100
manifold marine engines (HFM models) are rated to
provide dependable auxiliary power for oceangoing
vessels and other applications that require type approval
for marine classification societies.

24 *Not available in all countries. Specifications are subject to change. 25

Customer support

You can rely on us Worldwide locations

With more than 4,000 service locations worldwide,
John Deere is always there when you need service and North America, South America, Europe, Africa, and
and Caribbean Middle East
support. Locate your closest John Deere engine distributor John Deere Power Systems John Deere Power Systems
or service dealer at JohnDeere.com/Dealer. 3801 West Ridgeway Avenue Orléans-Saran Unit
P.O. Box 5100 La Foulonnerie – B.P. 11013
The right parts. At the right price. Right now. Waterloo, IA 50704-5100
Phone: 800-533-6446 (U.S.)
45401 Fleury-les-Aubrais Cedex
France
Whether you’ve got a brand new John Deere marine engine, Phone: 319-292-6060 (Outside the U.S.) Phone: +33-2-38-82-61-19
Fax: 319-292-5075 Fax: +33-2-38-84-62-66
one that’s been working for years, or a mixed fleet — John Deere Email: [email protected] Email: [email protected]
is ready to keep you up and running. You can rely on us for your
choice of genuine John Deere parts, remanufactured Mexico and Central America Australia and New Zealand
Industrias John Deere S.A. de C.V. John Deere Limited
components, and all-makes products. Whatever your choice, Boulevard Diaz Ordaz No. 500 Power Systems Division
find it exclusively at your authorized John Deere marine dealer Garza Garcia, Nuevo Leon 66210 P.O. Box 1126, Camden
or engine distributor, or by visiting JDParts.com. Mexico NSW 2570 Australia
Phone: + 52-81-8288-1212 Phone: + 61-2-4654-5501
Warranty support when you need it Fax: + 52-81-8288-8284
Email: [email protected]
Fax: + 61-2-4646-1236
Email: [email protected]
Every John Deere marine engine comes with a solid JohnDeere.com.au
JohnDeere.co.nz
2-year/2,000-hour standard warranty that applies not only to
the engine but also to John Deere parts and accessories added Far East
by a John Deere engine distributor.* John Deere Asia (Singapore) Pte. Ltd.
#06-02/03 Alexandra Point
Registering your John Deere marine engine enables your 438 Alexandra Road
119958 Singapore
John Deere marine dealer or engine distributor to respond Phone: +65-6879-8800
should you need a warrantable repair.‡ Register the warranty Fax: +65-6278-0363
for your engine at JohnDeere.com/OEMWarranty. Email: [email protected]

* When sold by John Deere, its authorized dealers and distributors, and delivered to
the first retail purchaser.
Go to JohnDeere.com/Dealer to
‡
See specific OEM product warranty language for applicable terms and conditions.
Refer to the John Deere new marine engine warranty for complete warranty find the service dealer nearest you.
coverage details.

26 27
This literature has been compiled for worldwide circulation. While general
information, pictures and descriptions are provided, some illustrations and
text may include finance, credit, insurance, product options and accessories
NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER OR
DISTRIBUTOR, AS APPLICABLE, FOR DETAILS. John Deere reserves the right
to change specification, design and price of the products described in this
literature without notice. John Deere’s green and yellow color schemes, the
leaping deer symbol, and JOHN DEERE are trademarks of Deere & Company.
DSWT59 (17-10) JohnDeere.com/Marine