Scribd
Upload
111 views1 page

Fully-Lugged Gearbox Operated Butterfly Valves PN16: Features & Benefits

This document provides information on butterfly valves from General Valves, including models F615, F625, and F629. It lists the materials, dimensions, weights, pressure/temperature ratings, and specifications for each valve model. Sizes range from 50-600mm and materials include ductile iron, aluminum bronze, nitrile rubber, EPDM, stainless steel, and carbon steel. Pressure ratings are up to PN16 and temperature ratings vary by model from -10°C to 130°C.

Uploaded by

Ronald
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views1 page

Fully-Lugged Gearbox Operated Butterfly Valves PN16: Features & Benefits

This document provides information on butterfly valves from General Valves, including models F615, F625, and F629. It lists the materials, dimensions, weights, pressure/temperature ratings, and specifications for each valve model. Sizes range from 50-600mm and materials include ductile iron, aluminum bronze, nitrile rubber, EPDM, stainless steel, and carbon steel. Pressure ratings are up to PN16 and temperature ratings vary by model from -10°C to 130°C.

Uploaded by

Ronald
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BALL VALVES

BUTTERFLY VALVES

F615 / F625 / F629 F625

Fully-lugged gearbox operated


Butterfly Valves
GENERAL VALVES

F625
50-300mm PN16

Features & Benefits


• Aluminium Bronze disc
• Stainless steel shaft
• Gearbox operated
• Valves are suitable for use with flanges conforming to BS EN 1092-2
PN10 or PN16 - Sizes 65-200mm
F629
• BS EN 1092-2 PN16 flanges only - Sizes 250-600mm PN16 only
• F625 sizes 50-300mm are WRAS approved

Materials
PART MATERIAL
Body Ductile Iron ASTM A536 (Epoxy Paint)
Disc Aluminium Bronze
Liner (F615) Nitrile Temp. -10 to 90°C
Liner (F625) EPDM (WRAS Approved) Temp. -10 to 100°C (80°C WRAS)
Liner (F629) EPDM (High Temperature) Temp. -10 to 130°C
Shaft Stainless Steel Type 410
Taper Pin Stainless Steel Type 316
Key Carbon Steel Dimensional Drawing
O-Ring Buna-N
Bushing PTFE

Dimensions & Weights


SIZE WEIGHT A B C D E F G H J K
(mm) (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

50 15.5 162 80 42 40 102 150 53 45 54 158


65 16 175 89 45 40 121 150 64 45 54 158
80 18.7 181 95 45 40 130 150 79 45 54 158
100 24.1 200 114 52 40 171 150 104 45 54 158
125 25 213 127 54 40 197 200 123 45 54 148
150 26.4 225 140 56 40 219 200 156 45 54 148
200 36.7 260 175 61 38 268 300 203 78 81 226
250 47.1 292 203 66 38 332 300 251 78 81 226
300 62.1 337 242 77 38 410 300 302 78 81 226
350 84.9 368 279 76 38 432 300 334 78 81 226 Pressure/Temperature Ratings
400 123.8 400 305 86 57 448 450 390 120 130 277 F615 F625 F629
450 139.7 422 381 105 57 546 450 441 120 130 277
TEMPERATURE (°C) -10 to 90 -10 to 100 -10 to 130
500 215.5 479 394 130 63 592 450 490 185 160 332
600 337.3 562 457 151 63 708 450 597 185 160 357 PRESSURE (BAR) 16 16 16

Intermediate pressure ratings shall be determined by


interpolation.
WRAS approved -10 to 80˚c

PRESSURE RATING: PN16 SPECIFICATION: Conforms to: BS EN 593: 2009


END CONNECTION: Lugged F615 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure
OPERATOR: Gearbox Equipment Directive 97/23/EC*
F625 - Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC* and
these valves are WRAS approved.
Vaild as of 200917

F629 - Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC.*
* See page 251 for more information

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or
omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

TECHNICAL HELPLINE: +44 (0)1473 277400


88
E: [email protected] W: www.cranefs.com

You might also like