Scribd
Upload
216 views1 page

Superfort 630-4 4.0 + 2.0 Betahete 800 Moulded Edges (1 X 220.0m) +GB

This technical datasheet provides specifications for a Superfort 630/4 4.0 + 2.0 Betahete conveyor belt. The belt has a carcass made of 4 plies of polyester and polyamide fabrics. It meets EN ISO 14890 standards. The heat resistant, anti-static covers are 4.0mm thick on top and 2.0mm on bottom. Test results are provided showing the belt exceeds standard requirements for properties like tensile strength, adhesion, and abrasion resistance. Temperature and pulley diameter requirements are also listed along with belt dimensions and test averages.

Uploaded by

Iulian Barbu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
216 views1 page

Superfort 630-4 4.0 + 2.0 Betahete 800 Moulded Edges (1 X 220.0m) +GB

This technical datasheet provides specifications for a Superfort 630/4 4.0 + 2.0 Betahete conveyor belt. The belt has a carcass made of 4 plies of polyester and polyamide fabrics. It meets EN ISO 14890 standards. The heat resistant, anti-static covers are 4.0mm thick on top and 2.0mm on bottom. Test results are provided showing the belt exceeds standard requirements for properties like tensile strength, adhesion, and abrasion resistance. Temperature and pulley diameter requirements are also listed along with belt dimensions and test averages.

Uploaded by

Iulian Barbu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Datasheet

Customer: S.C. INDUSTRIAL SEALS AND


ROLLS S.R.L.
Reference: 71186

Superfort 630/4 4.0 + 2.0 Betahete Moulded edges


Complying with EN ISO 14890
CARCASS STANDARD DUNLOP AVERAGE
The carcass is built up of 4 fabrics of Polyester warp and Polyamide weft (EP).
Tensile strength at break [N/mm] ≥ 630 737 ISO 283
Adhesion between plies [N/mm] ≥ 4.5 8.2 ISO 252
Thickness [mm] 4.3 4.3 ISO 583
Elongation at 10% TS nom [%] ≤ 1.5 1.1 ISO 283

COVERS STANDARD DUNLOP AVERAGE


Heat resistant, anti-static as per ISO 284, SBR
Top cover thickness [mm] 4.0 4.0 ISO 583
Bottom cover thickness [mm] 2.0 2.0 ISO 583
Minimum adhesion between cover and carcass [N/mm]
Top ≥ 3.5 14.8 ISO 252
Bottom ≥ 3.5 14.8 ISO 252

TECHNICAL DATA OF COVERS


Tensile strength at break [MPa] ≥ 20 22.4 ISO 37
Elongation at break [%] ≥ 450 610 ISO 37
Tear strength [N]/[MPa] ≥ 56.0/7.0 73.6/9.2 ISO 34-2
Abrasion resistance [mm³] ≤ 150 112 ISO 4649
Hardness, ±5 [Shore A] 60 60 ISO 7619

TEMPERATURE RANGE
Minimum ambient temperature [°C] -20
Maximum continuous material temperature [°C] +160
Maximum peak material temperature [°C] +180

MINIMUM PULLEY DIAMETERS FOR BELT-LOADS FROM 60% UP TO 100%


Drive pulley [mm] 500
Tail pulley [mm] 400
Bend/Snub pulley [mm] 315

BELT CHARACTERISTICS
Belt width [mm] 800
Weight per metre [kg/m] 9.6
Total thickness [mm] 10.3 ISO 583
Belt length [m] 220.0
Roll length [m] 220.0
Number of rolls 1
Roll diameter excl. packing [mm] 1743
Roll weight excl. packing [kg] 2102
The Dunlop averages data shown above is generated via our ongoing quality-testing program.
All information is collected with great care but may be changed at any time without prior notice.

Dunlop conveyor belts are ozone resistant (EN ISO 1431), REACH compliant
(EC 1907/2006) and suitable for use in ATEX regulated zones.
8.33

You might also like