Scribd
Upload
203 views7 pages

ACI-Beam Ledge

This document provides design calculations for the beam ledge and ledge end of Beam B1 according to ACI 318-99 standards. Material properties, section properties, straining actions including ultimate loads, and reinforcement requirements are calculated. Main reinforcement is determined to be 17 bars of 150 mm spacing with a total area of 0.1558 cm^2/cm. Check calculations are provided for bearing capacity, punching shear, and hanger reinforcement requirements.

Uploaded by

ja'far bader
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
203 views7 pages

ACI-Beam Ledge

This document provides design calculations for the beam ledge and ledge end of Beam B1 according to ACI 318-99 standards. Material properties, section properties, straining actions including ultimate loads, and reinforcement requirements are calculated. Main reinforcement is determined to be 17 bars of 150 mm spacing with a total area of 0.1558 cm^2/cm. Check calculations are provided for bearing capacity, punching shear, and hanger reinforcement requirements.

Uploaded by

ja'far bader
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 7

05/31/2020 at 15:21:50 Page 1 Of 7 478244806.

xls
Project No. Date

------- 31-May-20
DESIGN CALCULATION SHEET
Sheet No. Computed by

-- of -- --
Checked by Approved by
Subject ------------------------------
-- _
Building Design of Beam Ledge
DESIGN OF BEAM LEDGE ACCORDING TO ACI 318 - 99
Beam-B1 Ledge
Material Properties
Concrete Cylinder Strength (f 'C) = 350 Kg/Cm2
Steel Yield Stress (fY) = 4200 Kg/Cm2

Section Properties
Total Thickness (h) = 300.00 Cm
af
Depth of Section (d) = 27.00 Cm
Load distance to face of Beam (a) = 10.00 Cm a
Av (F 2)
Load distance to center of Stirrup's Leg (a f)= 12.00 Cm Vu As + Ah
a /d= 0.37 < 1 Nuc
(F1)
Width of bearing plate / pad (W) = 11.50 Cm
Distance between Ledge Loads (S) = 122.00 Cm
h d

Straining Actions 4 F1 + Cover


Ultimate Vertical Force (Vu) = 10.50 t
Ultimate Normal Force (Nuc) = 2.10 t (Min. = 0.20 Vu = 2.10 t) ACI - 11.9.3.4
Effective width for M & N=(W+5a f )or S = 71.50 Cm
Ultimate Moment (MU)=Vu.af+Nuc(h-d) = 6.99 m. t ACI - 11.9.3
Effective width for Shear =(W+4a) or S = 51.50 Cm
Shear Strength ( f Vn) = 66.48 t ACI - 11.9.3.2.1

Main Reinf. (F1) Calculations


Reinforcement for Flexure (A f) = 7.03 Cm2 / effective width of 71.50 Cm
Reinforcement for Normal force (A n) = 0.59 Cm2 / effective width of 71.50 Cm ACI - 11.9.3.4
Reinforcement for Shear Friction (Avf) = 2.10 Cm / effective width of
2
51.50 Cm ACI - 11.7.4.1, Eqn. (11-25)
Main Reinforcement (A s) = 0.1066 Cm2 / Cm ACI - 11.9.3.5 & 11.9.5
Total Area of Stirrups (A h) = 0.0492 Cm / Cm
2
ACI - 11.9.4
Provide (A s+A h) = 0.1558 Cm2 / Cm @ F 17 @ 150 mm

Check of bearing Av
Bearing plate length ( L ) = 11.50 Cm (F2)
Bearing Strength (f Pnb)= f.0.85.f'c.W.L
As + Ah
= 27.54 t > Vu O.K. L d f/2 (F1)

Check of punching d f /2
Assume d f = d df Section
Punching Strength (f Pnp) = 40.30 t > Vu O.K.
L df/2
Check Required Area for Hanger Reinf. (F2)
Spacing between Vertical hangers(ss) = 150 mm d f /2
A v = Vu . Spacing (ss) / ( f fy.S) = 0.362 Cm2
Verifying the serviceability af
W
A v = (Vu/1.5) . (SS) / ( 0.5 . Fy).(W+3a) = 1.205 Cm 2 (governs) Plan
d f /2
Av = F 12 @ 150

478244806.xls - Rev. 1.0 Page 2 / 7 05/31/2020


478244806.xls - Rev. 1.0 Page 3 / 7 05/31/2020
Project No. Date

------ 31-May-20
DESIGN CALCULATION SHEET
Sheet No. Computed by

-- of -- --
Checked by Approved by
Subject ---------------------
-- _
Building Design of Ledge-End
DESIGN OF BEAM LEDGE ACCORDING TO ACI 318 - 99
Beam-B1 Ledge-end
Material Properties
Concrete Cylinder Strength (f 'C) = 350 Kg/Cm2
Steel Yield Stress (fY) = 4200 Kg/Cm2
Ledge End
Section Properties
Total Thickness (h) = 35.00 Cm
Depth of Section (d) = 30.00 Cm af
Load distance to face of Beam (a) = 10.00 Cm Av (F2)
Load distance to center of Stirrup's Leg (a f)= a
16.00 Cm
Vu
a /d= 0.33 < 1 As + Ah
Nuc
Width of bearing plate / pad (W) = 10.00 Cm (F1)
Distance between Ledge Loads (S) = 150.00 Cm
Distance to Ledge end (C) = 15.00 Cm
h d

Straining Actions
Ultimate Vertical Force (Vu) = 19.00 t
4 F1 + Cover
Ultimate Normal Force (Nuc) = 3.80 t (Min. = 0.20 Vu = 3.80 t) ACI - 11.9.3.4
Effective width for M & N=(W+5a f )or S = 30.00 Cm
Ultimate Moment (MU)=Vu.af+Nuc(h-d) = 3.23 m. t ACI - 11.9.3
Effective width for Shear =(W+4a) or S = 30.00 Cm
Shear Strength ( f Vn) = 43.03 t ACI - 11.9.3.2.1

Main Reinf. (F1) Calculations


Reinforcement for Flexure (A f) = 3.19 Cm2 / effective width of 30.00 Cm Min. to ACI-10.5
Reinforcement for Normal force (A n) = 1.06 Cm2 / effective width of 30.00 Cm ACI - 11.9.3.4
Reinforcement for Shear Friction (Avf) = 3.80 Cm / effective width of
2
30.00 Cm ACI - 11.7.4.1, Eqn. (11-25)
Main Reinforcement (A s) = 0.1417 Cm2 / Cm ACI - 11.9.3.5 & 11.9.5
Total Area of Stirrups (A h) = 0.0531 Cm / Cm
2
ACI - 11.9.4
Provide (A s+A h) = 0.1949 Cm2 / Cm @ F 19 @ 150 mm

Check of bearing Av
Bearing plate length ( L ) = 15.00 Cm (F2)
Bearing Strength (f Pnb)= f.0.85.f'c.W.L
As + Ah
= 31.24 t > Vu O.K. L d f/2 (F1)

Check of punching d f /2
Assume d f = d df Section
Punching Strength (f Pnp) = 27.83 t > Vu O.K.
L df/2
Check Required Area for Hanger Reinf. (F2)
Spacing between Vertical hangers(ss) = 150 mm d f /2
A v = Vu . Spacing (ss) / ( f fy.S) = 2.661 Cm2
Verifying the serviceability W af
A v = (Vu/1.5) . (SS) / ( 0.5 . Fy).(W+3a) = 3.016 Cm2 (governs) Plan
d f /2
Av = F 20 @ 150

05/31/2020 at 15:21:50 Page 4 Of 7 478244806.xls


05/31/2020 at 15:21:50 Page 5 Of 7 478244806.xls
Project No. Date

---------
DESIGN CALCULATION SHEET
Sheet No. Computed by

-- of -- --
Checked by Approved by
Subject -------------
_
Building Design of Beam Ledge
DESIGN OF BEAM LEDGE ACCORDING TO ACI 318 - 99
Beam-B2 Ledge
Material Properties
Concrete Cylinder Strength (f 'C) = 280 Kg/Cm2
Steel Yield Stress (fY) = 3600 Kg/Cm2

Section Properties
Total Thickness (h) = 20.00 Cm af
Depth of Section (d) = 200.00 Cm Av (F2)
a
Load distance to face of Beam (a) = 12.00 Cm
Load distance to center of Stirrup's Leg (a f)= Vu
17.00 Cm As + Ah
a /d= 0.06 < 1 Nuc (F1)
Unit Width of bearing plate / pad (W) = 250.00 Cm
Unit distance of distributed Loads (S) = 250.00 Cm
h d

Straining Actions
4 F1 + Cover
Ultimate Vertical Force (Vu) = 31.00 t
Ultimate Normal Force (Nuc) = 0.00 t (Min. = 0.20 Vu = 6.20 t) ACI - 11.9.3.4
Effective width for M & N=(W+5a f )or S = 250.00 Cm
Ultimate Moment (MU)=Vu.af+Nuc(h-d) = -5.89 m. t ACI - 11.9.3
Effective width for Shear =(W+4a) or S = 250.00 Cm
Shear Strength ( f Vn) = 2380.00 t ACI - 11.9.3.2.1

Main Reinf. (F1) Calculations


Reinforcement for Flexure (A f) = -1.21 Cm2 / effective width of 250.00 Cm Min. to ACI-10.5
Reinforcement for Normal force (A n) = 2.03 Cm2 / effective width of 250.00 Cm ACI - 11.9.3.4
Reinforcement for Shear Friction (Avf) = 7.24 Cm / effective width of
2
250.00 Cm ACI - 11.7.4.1, Eqn. (11-25)
Main Reinforcement (A s) = 0.6222 Cm2 / Cm ACI - 11.9.3.5 & 11.9.5
Total Area of Stirrups (A h) = 0.3071 Cm / Cm
2
ACI - 11.9.4
Provide (A s+A h) = 0.9293 Cm2 / Cm @ F 49 @ 200 mm
Big Bar Diameter
Check of bearing Av
Bearing plate length ( L ) = 10.00 Cm (F2)
Bearing Strength (f Pnb)= f.0.85.f'c.W.L
As + Ah
= 416.50 t > Vu O.K. L df/2 (F1)

Check of punching d f /2
Assume d f = d df Section
Punching Strength (f Pnp) = 2021.49 t > Vu O.K.

Check Required Area for Hanger Reinf. (F2)


Spacing between Vertical hangers(ss) = 200 mm
A v = Vu . Spacing (ss) / ( f fy.S) = 0.810 Cm2
Verifying the serviceability W
A v = (Vu/1.5) . (SS) / ( 0.5 . Fy). (W) = 0.919 Cm2 (governs) Plan

Av = F 11 @ 200

05/31/2020 at 15:21:50 Page 6 Of 7 478244806.xls


05/31/2020 at 15:21:50 Page 7 Of 7 478244806.xls

You might also like