Scribd
Upload
1K views1 page

M30 With GGBS Self Compacting Concrete

This document provides a concrete mix design for a M30 grade concrete with 20mm maximum aggregate size to be used in Mumbai. The mix has a target mean strength of 38.25 MPa, uses PPC 53 grade cement and 47% GGBS as cementitious materials, and aggregates from Turbhe including crushed rock of 20mm, 10mm and crushed sand sizes. The mix proportion by weight is 1:1.68:1.62 for cement, fine aggregates and coarse aggregates respectively with a free water-cement ratio of 0.31. Notes provide guidance on accounting for moisture during production and testing trials.

Uploaded by

Pritha Das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views1 page

M30 With GGBS Self Compacting Concrete

This document provides a concrete mix design for a M30 grade concrete with 20mm maximum aggregate size to be used in Mumbai. The mix has a target mean strength of 38.25 MPa, uses PPC 53 grade cement and 47% GGBS as cementitious materials, and aggregates from Turbhe including crushed rock of 20mm, 10mm and crushed sand sizes. The mix proportion by weight is 1:1.68:1.62 for cement, fine aggregates and coarse aggregates respectively with a free water-cement ratio of 0.31. Notes provide guidance on accounting for moisture during production and testing trials.

Uploaded by

Pritha Das
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

CONCRETE MIX DESIGN

DATE : 6/2/2020
Project :
Location of Project : Mumbai
Grade of Concrete : M 30 SSC
Maximum Size of Aggregate : 20 mm
Workability of Concrete Required : 650 +/- 25 mm
Assumed Standard Deviation : 5 Mpa
Degree of Quality Control : Good
Type of Exposure : Mild
Value of 'k' : 1.65
TARGET MEAN STRENGTH N/mm2 : 38.25 Mpa
BASIC DATA
CEMENT
Type of Cement PPC 53 Grade Cement %
Specific Gravity 3 53%
FLYASH
Specific Gravity 2.25
Fly ash in Total Cementitious 0%
GGBS
Specific Gravity 2.9
GGBS in Total Cementitious 47%
AGGREGATES
20 MM 10 MM Crushed Sand River Sand

Crushed Rock, Crushed Rock, Crushed Rock,


Type and Source of Aggregates
Turbhe Turbhe Turbhe

Specific Gravity 2.84 2.824 2.81 2.83


Average Specific Gravity 2.825
Water Absorption 1.51% 2.03% 3.50% 3.70%
Aggregates % in Total Agg. 29% 20% 51% 0%
ADMIXTURE
Specific Gravity
Dosage Of Admixture 1.1%
MATERIAL REQUIRED PER m3 OF CONCRETE
Total Cementitious Content 550 Kg
Entraped Air 0%
Cement 290 Kg
Fly Ash 0 Kg
GGBS 260 Kg
Water Cement Ratio 0.31
Free Water 170.5 lits
Total Volume of Aggregates 0.643 Cum
Coarse Aggregates - 20mm 534 Kg
Coarse Aggregates - 10mm 354 Kg
Crushed Sand 926 Kg
River Sand 0 Kg
Admixture 5.775 Kg
Density of Fresh Concrete 2541 Kg/m3
MIX PROPORTION BY WEIGHT:
CEMENT FINE AGGREGATES COARSE AGGREGATES
1 1.68 1.62
FREE (W/C) RATIO 0.31

Note : Mix Design is done by taking aggregates in saturated surface dry condition (SSD).
Note : Correction for water to be done as per moisture content during production.
Note : Do not use it, without doing at least 3 trials with each brand of cement and admixture.

You might also like