User manual

www.tcl.eu
Important information

Safety table-cloths, curtains, etc.

English
Ensure that your domestic mains supply voltage The apparatus shall not be exposed to dripping or
matches the voltage indicated on the identification splashing and no objects filled with liquids, such as
sticker located at the back of your set. Where the vases shall be placed on the apparatus.
mains plug, AC inlet or an appliance coupler is used Batteries (battery pack or batteries installed) shall not
as disconnect device, it shall remain readily operable.
be exposed to excessive heat such as sunshine, fire
On certain models, the light indicator is located at the or the like.
side of the TV set. The absence of a light indication
To reduce the risk of fire or electric shock, do not
at the front does not mean that the TV set is fully
expose this apparatus to rain or moisture.
disconnected from the mains. To disconnect the TV
set completely, the mains plug must be pulled out. Never place a television set in an unstable location. A
television set may fall, causing serious personal injury
The TV set’s components are sensitive to heat. The or death. Many injuries, particularly to children, can
maximum ambient temperature should not exceed be avoided by taking simple precautions such as:
35º Celsius. Do not cover the vents at the back or
sides of the TV set. Leave sufficient space around it to • Using cabinets or stands recommended by the
allow adequate ventilation. Install the appliance away manufacturer of the television set.
from any source of heat (fireplace, etc.) or appliances • Only using furniture that can safely support the
creating strong magnetic or electric fields. television set.
Moisture in rooms where the set is installed should • Ensuring the television set is not overhanging the
not exceed 75% humidity. Moving the set from a cold edge of the supporting furniture.
place to a warm one can cause condensation on the • Not placing the television set on tall furniture
screen (and on some components inside the TV set). (for example, cupboards or bookcases) without
Let the condensation evaporate before switching the anchoring both the furniture and the television set to
TV set on again. a suitable support.
The or POWER/ button on the TV set or the • Not placing the television set on cloth or other
button on the remote control can be used to switch it materials that may be located between the television
on and put it into standby mode. If you are not going set and supporting furniture.
to be watching the TV for a lengthy period of time, • Educating children about the dangers of climbing on
switch it off completely by removing the plug from the furniture to reach the television set or its controls.
mains power socket. If your existing television set is being retained and
During thunderstorms, we recommend that you relocated, the same considerations as above should
disconnect the TV set from the mains and aerial so be applied.
that it is not affected by electrical or electromagnetic Equipment with this symbol is a Class II or
surges that could damage it. For this reason, keep the double insulated electrical appliance. It has
mains and aerial sockets accessible so they can be been designed in such a way that it does not
disconnected, if necessary. require a safety connection to electrical earth.
Unplug the TV set immediately if you notice it giving Equipment without this symbol is a Class I
off a smell of burning or smoke. You must never, electrical appliance. It shall be connected to a
under any circumstances, open the TV set yourself, mains socket outlet with a protective earthing
as you run the risk of an electric shock in doing so. connection.
To prevent the spread of fire, keep candles or
WARNINGS
other open flames away from this product at all
This appliance is intended for domestic household times.
use only and should not be used for any other
application, such as for non-domestic use or in a To prevent injury, this apparatus must be securely
commercial environment. attached to the floor/wall in accordance with the
installation instructions.
If the external flexible cable or cord of this product is
damaged, it shall be replaced by the manufacturer or To reduce the risk of RF exposure, the use distance
his service agent or a similar qualified person in order of this apparatus should be at least 100cm.
to avoid a hazard.
TV screen
Leave more than 10cm clearance around the
television to allow adequate ventilation. The The TV screen used in this product is made of glass.
ventilation should not be impeded by covering the Therefore, it can break when the product is dropped
ventilation openings with items, such as newspapers, or impacted upon by other objects.

EN 3
 Important information

The TV screen is a very high technology product,

English

giving you finely detailed pictures. Occasionally, a few

nonactive pixels may appear on the screen as a fixed
point of blue, green or red. This does not affect the
performance of your product.
Care
Use a glass-cleaning product to clean the screen and
a soft cloth and mild detergent to clean the rest of the
set.
Important: Using strong detergents, alcohol-based
and abrasive products may damage the screen.
Dust the vents at the back and sides regularly. Using
solvents, abrasive or alcohol-based products could
damage the TV set. If an object or liquid enters the
appliance, unplug it immediately and have it checked
by an authorized engineer. Never open the appliance
yourself since this may put you at risk or damage the
appliance.
ESD regulation
This apparatus meets ESD performance criteria.
In case the apparatus does not recover in Ethernet
connection mode or USB playing mode due to
electrostatic discharge, user intervention is required.
Hanging the TV set on the wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
• Check that the wall can support the weight of the TV
set and wall mount assembly.
• Follow the mounting instructions provided with the
wall mount. For certain models, make sure to screw
the hexagonal VESA wall mounting screw bosses
(and screws) provided with the set into the nuts for
the wall mount at the back of your set before your
wall mounting.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the
material of the wall.
• Make sure that the TV set cables are placed so that
there is no danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here.
Multi product user manual
The features described in this manual are common to
most models. Some features may not be available on
your TV and/or your TV may include features that are
not described in this user manual. The illustrations in
this manual may differ from the actual product. Please
refer to the actual product.

EN 4
 Important information

Information for Users on Disposal of Old Equipment and Batteries

English
[European Union]
These symbols indicate that the electrical and electronic equipment and the battery with this
symbol should not be disposed of as general household waste at their end-of-life. Instead, the
products should be handed over to the applicable collection points for the recycling of electrical
and electronic equipment as well as batteries for proper treatment, recovery and recycling in
Products
accordance with your national legislation and the Directive 2012/19/EU, 2006/66/EC and 2008/12/
EC.
By disposing of these products correctly, you will help to conserve natural resources and will help
to prevent potential negative effects on the environment and human health which could otherwise
be caused by inappropriate waste handling of these products.
Battery
For more information about collection points and recycling of these products, please contact your
Notice: local municipal office, your household waste disposal service or the shop where you purchased
The sign Pb the product.
below the
symbol for Penalties may be applicable for incorrect disposal of this waste, in accordance with national
batteries
indicates that legislation.
this battery
contains lead. [Business users]
If you wish to dispose of this product, please contact your supplier and check the terms and
conditions of the purchase contract.
[Other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to dispose of these items, please
do so in accordance with applicable national legislation or other rules in your country for the
treatment of old electrical equipment and batteries.

Dear Customer,
Hereby, TCL declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address: www.tcl.eu
TCL Operations Polska Sp. z o.o.
ul. A. Mickiewicza 31/41
96-300 Żyrardów, Poland
Email address: [email protected]

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.

EN 5
 Contents

Important information…………………………………… 3 Using auto power on………………………………… 15

English

Using auto standby………………………………… 15

Chapter 1 - Connections HbbTV………………………………………………… 15
Connect the power and antenna……………………… 7 HbbTV access……………………………………… 16
Connect Blu-ray Disc player, HD game console, HD HbbTV deactivation………………………………… 16
camcorder, headphones, CI module…………………… 7 Instant power on……………………………………… 16
Connect to the Internet………………………………… 8 E-manual……………………………………………… 16
Software update……………………………………… 16
Chapter 2 - Getting started
Reset shop…………………………………………… 16
Remote control functions……………………………… 9 Viewing pictures, playing music and watching videos
Installing batteries……………………………………… 9 from a USB storage device…………………………… 16
Exclusive remote control……………………………… 10
Installing batteries…………………………………… 10 Chapter 5 - Other information
Switch the TV on and off……………………………… 11 Password in Parental Control………………………… 18
Initial setup…………………………………………… 11 Troubleshooting……………………………………… 18

Chapter 3 - Basic TV operations

Accessing channels…………………………………… 12
Watching connected devices………………………… 12
Adjusting volume……………………………………… 12
Accessing Smart TV homepage…………………… 12
Using TV settings menu……………………………… 12

Chapter 4 - Using more of your TV

Installing channels…………………………………… 13
Common interface…………………………………… 13
Using the common interface module……………… 13
Accessing common interface services…………… 13
Using EPG (Electronic Programme Guide)………… 13
Using subtitles………………………………………… 13
Turning on/off subtitles……………………………… 14
Enabling subtitle languages on digital TV
channels……………………………………………… 14
Selecting a subtitle type on digital TV channels… 14
Using Teletext………………………………………… 14
Turning on/off Teletext……………………………… 14
Selecting decoding page language……………… 14
Digital Teletext language…………………………… 14
Network connection…………………………………… 14
Connecting to a wireless network………………… 14
Connecting to a wired network…………………… 15
Networked waking up………………………………… 15
T-Link…………………………………………………… 15
Enabling or disabling T-Link……………………… 15

EN 6
Chapter 1 - Connections
Connect the power and antenna

English
To switch on TV after connecting power cord, press or POWER/ .
Notes:
-- Position of power socket varies according to TV model.
-- Disconnect the power cord before connecting devices.

Cable

Connect Blu-ray Disc player, HD game console, HD camcorder, headphones,

CI module
5V 0.5A MAX
(Service port)
USB 2.0
LAN

HD game
HDMI 1 (4K)

console
HDMI 2 (4K)

Antenna/Cable input Satellite input

13/18V

Blu-ray Disc
0.4A MAX

player HD Camcorder
SPDIF

Common interface
HDMI 3 (4K)

ARC
USB 2.0

5V 0.5A MAX
AV adapter

EN 7
 Connections

Connect to the Internet

English

Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network.
The connection method may be different depending on your actual network configuration. If you have any
questions about your home network, please refer to your Internet service provider.

Wired connection
Router

Modem Internet

LAN port

Wireless connection
Modem Internet

Wireless router

Notes:
-- Your TV might not have all connectors visible on diagram above. Number of USB and HDMI ports may vary
according to TV model.
-- Button and connector locations may vary according to TV model.
-- USB connectors are for data input from USB drives and for connecting other relevant USB devices where
applicable.
-- All USB devices have to be directly connected to TV set without cable extenders. In case extender is
required, maximum 50cm length is recommended. Longer extenders should have ferrite beads.
-- ARC (Audio Return Channel) function is only supported on the HDMI port identified with ARC. To use ARC
function, please turn on T-Link function first as described in the T-Link section.
-- It is recommended to use high quality and well shielded HDMI cables to avoid possible interferences.
-- Please use headphones with 3.5mm TRS connector. Excessive sound pressure from headphones can cause
hearing loss.

EN 8
Chapter 2 - Getting started
Remote control functions

English
Most of your television's functions are available via the menus that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to configure all the general settings.
To switch the sound off and back on.
Standby / quit standby.
Numeric buttons To enter channel numbers or a digit.
To display programme information, if available.
LIST To display the channel list.
/ To control the volume.
Freeview Play To access the Freeview Play service.
To access or exit the Smart TV homepage.
P / To change channels.
To display the Settings menu.
To display the Option menu.
▲/▼/◄/► Navigation direction buttons.
OK To confirm an entry or selection.
To return to the previous menu.
To select input source.
EXIT To exit the menu, homepage or an App, etc.
LANG To select a sound type available for selected analogue
TV programme; to select an audio language available for
selected digital TV programme.
GUIDE To toggle the Electronic Programme Guide on or off (only
available for digital channels).
TEXT To toggle Teletext on or off.
SUBT. To select a subtitle language available for selected digital TV
programme.
Colour buttons To select tasks or Teletext pages; to be used for HbbTV
function.
To start fast reverse.
To pause playback.
To start fast forward.
ZOOM To select the screen mode.
Note: You are recommended to use the full screen mode.
Do not use the display mode with black bars on both sides
of the picture (such as 4:3) for a long time; otherwise the TV
screen may be damaged permanently.
To start playback.
To stop playback.
NETFLIX To access Netflix if available.

Installing batteries
1. Push to open the back cover as
illustrated.
2. Insert two AAA batteries according to the
polarities marked on the batteries case.
3. Replace the back cover as illustrated.

Note: The remote control type may be changed without notice.

EN 9
 Getting started

Exclusive remote control

English

To switch the sound off and back on.

Standby / quit standby.
To access or exit the Smart TV homepage.
To display the Option menu.
▲/▼/◄/► Navigation direction buttons.
OK To confirm an entry or selection.
To return to the previous menu.
To select input source.
To turn on the voice function. (Available only when the
network connection is normal.)
To display the Settings menu.
/ To control the volume.
P / To change channels.
NETFLIX To access Netflix if available.
To pop up the virtual remote control keyboard when
available.

Notes:
-- This remote control is available only for selected models. The remote
control type may be changed without notice.
-- Follow the on-screen guide to pair the remote control with the TV when
pressing the button for the first time.

Installing batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the polarities
marked on the battery case.
3. Replace the back cover as illustrated.

EN 10
 Getting started

Important:

English
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries when
the remote control is not to be used for a long time. Batteries left in equipment may cause damage through
deterioration and corrosive leakage, invalidating the guarantee.
To protect the environment use local recycling facilities for battery disposal. Dispose of used batteries
according to the instructions.
CAUTION: Risk of explosion if batteries are replaced by an incorrect type. Replace only with the same or
equivalent type recommended by the equipment manufacturer.
If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the
following functions:
For models with below buttons on the set: For models with below buttons on the set:
TV mode In menus
/◄
P ▲
P ▼
/►
►
Features (Short press) ◄
(Long press) Features (Long press) Features (Long press)
OK (Short press) OK (Short press)
For models with below button on the set:
Power on (Short press)
Features (Short press)
Confirm (Long press)

Switch the TV on and off

1. When the power cord is connected, the TV will be turned on directly or be in standby mode. If the TV is in
standby mode, press the or POWER/ button on the set or the button on the remote control to turn it
on.
2. To put the TV into standby mode, press the button on the remote control. The TV set remains powered up,
but with low energy consumption.
3. To switch the TV off, unplug the mains plug from the mains outlet.

Initial setup
The first time you switch the set on, the Hello screen appears, which guides you through the initial setup
process. Follow the on-screen instructions to finish the initial setup process such as selecting the language,
connecting to the network, scanning channels, and more. During each step, either make a choice or skip the
step. If you skip a step, you can perform the setup later from the settings menu.
Note: If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of
or poor broadcasting in some areas.

EN 11
 Chapter 3 - Basic TV operations
Accessing channels Note: Since the connection with Internet takes
English

time, it’s recommended that you wait a few

Using the numeric buttons: press the corresponding minutes to use the Smart TV feature after
numeric buttons on the remote control to access the activation of TV from standby.
channels.
Using the P / buttons: press the P / buttons
on the remote control to scroll through the channels. Using TV settings menu
Using the LIST button: press the LIST button on the Allows you to adjust TV settings, such as picture and
remote control to display the channel list and press sound.
▲/▼/◄/► and OK to select channels. 1. Press on the remote control to display the
Settings menu.
Watching connected devices 2. Press ▲/▼ to select the desired item, then press
OK/► to enter the corresponding submenu.
Press on the remote control to display the source
list. Press ▲/▼ to select TV or other input sources 3. In submenus, press ▲/▼ to select menu options,
and press OK to confirm. then press OK/► to enter the option list, the
adjustment interface, or the corresponding
You can also press on the remote control to
submenu.
display the homepage, press ◄/► to select the TV
page, then press ▲/▼/◄/► and OK to select the 4. Press to return to the previous menu.
input source. 5. Press EXIT or to close the menu.
Notes:
Adjusting volume -- You can also press on the remote control,
select Settings (if available) and press OK to
Volume control: press the / buttons on the enter the Settings menu. Some options may not
remote control to increase or decrease the volume. be available for certain signal sources.
Sound mute: press the button to temporarily mute -- Setting LED Motion clear on will make fast
the sound. Press this button again or the button moving images clearer by controlling the LED
to restore the sound. backlight, but the picture will be darker and more
flickering than with LED Motion clear off.
Accessing Smart TV homepage
Allows you to enjoy Internet Applications (Apps) and
specially adapted Internet websites. You can make
controlling with the TV remote control.
WARNING:
• Configure the network settings before using Smart
TV applications.
• Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the content provider,
an application’s updates or the application itself may
be discontinued.
• Depending on your country's regulations, some
applications may have limited service or not be
supported.
• Changes in application content may be made
without prior notice by the service provider.
1. Press on the remote control to display the
Smart TV homepage.
2. Press ◄/► to select pages, then press ▲/▼/◄/►
and OK to enter the desired Apps or functions.
3. Press EXIT or to return to the homepage.
4. Press EXIT or to exit the homepage.

EN 12
Chapter 4 - Using more of your TV
Installing channels 2. Push the module in as far as it will go.

English
3. Turn on the TV and wait for the common interface
This section describes how to search and store
function to be activated. This may take several
channels automatically. This may be done in any of
minutes.
the cases below:
-- you have skipped the channel installation step in the Note: Do not remove the common interface
initial setup; module from the slot. Removing the module
will deactivate the digital services. This
-- you are prompted that there are no channels in TV
TV set has passed CI+ certification. It is
mode;
recommended that you use a common
-- you want to retune your Freeview TV. interface module marked with CI+.
1. In TV mode, press on the remote control and
select Channel > Channel scan. Press OK/► to Accessing common interface services
enter. After inserting and activating the common interface
2. The TV installs and arranges channels according module, press on the remote control, select
to your country or region. Press ▲/▼ to select Channel > Common interface and press OK/► to
Country/Region, and press OK/► to enter. Enter enter.
the default password 1234 or your own password This menu option is only available if the common
in case you have changed the password in the interface module is correctly inserted and activated.
System > Lock menu. Press ▲/▼ to select your On-screen applications and content are provided by
country or region and press OK to confirm. your digital TV service operator.
3. Press ▲/▼ to select Automatic search and press
OK/► to enter. Using EPG (Electronic Programme
4. Press ▲/▼ to select Tuner mode and press Guide)
◄/► to select Antenna, Cable or Satellite.
(Note: Satellite option is available only in selected EPG is an on-screen guide that displays scheduled
models.) digital TV programmes. You can navigate, select and
view programmes.
5. Press ▲/▼ to select other options to configure.
6. After configuration is completed, press ▼ to select 1. Press on the remote control, select Channel >
Search and press OK to start scanning channels. EPG and press OK/► to enter, or press GUIDE
on the remote control, the EPG menu will
7. The channel search may take a few minutes. After
appear, which allows you to get information
the automatic search, channels are arranged in a
about the current or next programme playing
preset order. If you want to edit the channel list,
on each channel. Navigate through the different
press on the remote control, select Channel >
programmes using the ▲/▼/◄/► buttons on the
Channel organizer and press OK/► to enter.
remote control.
2. Use the related buttons shown at the bottom of the
Common interface screen to view EPG.
Encrypted digital TV channels can be decoded with a -- Catch up: Press the Freeview Play button to
common interface module and a card provided by a access the Freeview Play service.
digital TV service operator. -- Option: Press to select date, display
The common interface module may enable several programme filter, or view your schedule list.
digital services, depending on the operator and -- Previous day: Press to view EPG of the
services you choose (for example, pay TV). Contact previous day.
your digital TV service operator for more information
-- Next day: Press to view EPG of the next day.
about services and terms.
3. Press EXIT to exit EPG.
Using the common interface module
WARNING: Switch off your TV before inserting a Using subtitles
common interface module. Be sure to follow the
You can enable subtitles for each TV channel.
instructions described below. Wrong insertion of
Subtitles are broadcast via Teletext or DVB-T/DVB-C
a common interface module may damage both the
digital broadcasts. With digital broadcasts, you have
module and your TV.
the additional option of selecting a preferred subtitle
1. Following the directions printed on the common language.
interface module, gently insert the module into the
common interface slot on the TV.

EN 13
 Using more of your TV

Turning on/off subtitles Digital Teletext language

English

1. Press on the remote control, select Channel > On digital TV channels, depending on the
Subtitle and press OK/► to enter. broadcaster, you may be able to enjoy a service with
2. Select the Subtitle option, press OK/► to enter, multiple initial Teletext pages in different languages.
press ▲/▼ to select On or Off and press OK to This function allows you to select an available
confirm. language as primary language, which relates to
different initial Teletext pages.
3. Press EXIT or to close the menu.
1. Press on the remote control, select Channel >
Enabling subtitle languages on digital TV Teletext > Digital teletext language and press
channels OK/► to enter.
1. Press on the remote control, select Channel > 2. Press ▲/▼ to select a language and press OK to
Subtitle > Digital subtitle language 1st and confirm.
press OK/► to enter. 3. Press EXIT or to close the menu.
2. Press ▲/▼ to select a subtitle language as your
preferred language and press OK to confirm. Network connection
3. Press ▲/▼ to select 2nd digital subtitle
You can set up your TV so that it can access the
language and press OK/► to enter.
Internet through your local area network (LAN) using
4. Press ▲/▼ to select a secondary subtitle language a wired or wireless connection.
and press OK to confirm.
5. Press EXIT or to close the menu. Connecting to a wireless network
Shortcut operation: Press SUBT. on the remote Your TV is equipped to be connected to your home
control to directly select a subtitle language available network wirelessly. To do that you need a wireless
for the selected digital TV programme. router or modem.
1. Press on the remote control, select Network >
Selecting a subtitle type on digital TV Wireless connection > Wireless connection and
channels press OK/► to enter.
1. Press on the remote control, select Channel > 2. Press ▲/▼ to select On and press OK to confirm.
Subtitle > Subtitle type and press OK/► to enter. 3. You can set the wireless network connection in 3
2. Press ▲/▼ to select a subtitle type and press OK ways:
to confirm. You can select Hearing impaired to -- a) Scan
display the hearing impaired subtitles with your When Wireless connection is turned on, the TV
selected language. will search all access points within range. Access
3. Press EXIT or to close the menu. points found by the TV will be displayed. Press
▲/▼ to select an available access point, then
Using Teletext press OK/► to connect. Select All wireless (if
available) to find more access points.
Turning on/off Teletext Note: If you select a protected access point,
1. Press TEXT on the remote control to turn Teletext you will have to enter the corresponding
on. password.
2. Press TEXT on the remote control again to turn on -- b) Manual
Teletext PAT mode. Press ▲/▼ to select Manual and press OK/► to
enter. You will be prompted to enter the correct
3. Press TEXT on the remote control again to turn
SSID of an available wireless router, select its
Teletext off.
security type and enter the password (if needed)
Selecting decoding page language to set up the connection.
1. Press on the remote control, select Channel > -- c) Auto
Teletext > Decoding page language and press If your AP (Access Point) supports WPS (Wi-
OK/► to enter. Fi Protected Setup), you can connect to the
network via PIN (Personal Identification Number)
2. Press ▲/▼ to select a proper type of language
or PBC (Push Button Configuration). WPS will
in which Teletext will display and press OK to
automatically configure the SSID and WPA key
confirm.
in either mode.
3. Press EXIT or to close the menu.

EN 14
 Using more of your TV

Press ▲/▼ to select Auto and press OK/► to 2. The desired controller, such as a smartphone, is

English
enter. connected to the same network as your TV;
• PIN: Select PIN and press OK/► to enter. 3. An App which supports networked waking up
Choose a random PIN code. Make sure function, has been installed into the controller;
this code is installed on the AP. (For the 4. Networked standby is set to On in the Network
procedures, refer to your router manual.) Select
OK and press OK to set up the connection. menu.
• PBC: If your router has a PBC push button, When the TV is in networked standby mode, you can
select PBC and press OK/► to enter. Press use the App to wake up the TV remotely.
the PBC push button on your router within 2
minutes before you select OK and press OK T-Link
again. Your TV will automatically acquire all the
Use this function to search for CEC devices connected
network setting values it needs and connect to
to the HDMI sockets in your TV and enable one-touch
your network.
play and one-touch standby between CEC devices.
4. Press to return to the Network menu.
5. If you want to check the Internet connectivity, press Enabling or disabling T-Link
▲/▼ to select Connecting test and press OK/►. 1. Press on the remote control, select T-Link and
Connecting to a wired network press OK/► to enter.
You can connect your TV to your LAN using cable in 2. Press ▲/▼ to select T-Link and press OK/► to
three ways: enter.
• You can connect your TV to your LAN by connecting 3. Press ▲/▼ to select On or Off and press OK to
the LAN port on your TV to an external modem confirm.
using a Cat 5 cable. 4. Press EXIT to close the menu.
• You can connect your TV to your LAN by connecting Using auto power on
the LAN port on your TV to an IP sharer, which is
connected to an external modem. Use Cat 5 cable Enables the TV to automatically power on when you
for the connection. power on a CEC device (e.g. DVD) with the device’s
remote. Select On to enable this function.
• Depending on how your network is configured, you
may be able to connect your TV to your LAN by Using auto standby
connecting the LAN port on your TV directly to a Enables all CEC devices to automatically go to the
network wall outlet using a Cat 5 cable. Note that standby mode when you turn off the TV with the TV
the wall outlet is connected to a modem or router remote. Select On to enable this function.
elsewhere in your house.
Note: The CEC functions depend on the devices
1. Press on the remote control, select Network > connected and it is possible that some
Wired settings and press OK/► to enter. devices may not interoperate correctly when
2. Check the network information or enter IP settings connected to this TV. The user manual or
to set the IP address, Subnet mask, Default the manufacturer of the problematic devices
gateway, Primary DNS and Secondary DNS should be consulted for further information.
values manually. Then press ▲/▼/◄/► to select
OK and press OK to confirm. The TV set will try to
HbbTV
connect to the network and inform you about the
result. HbbTV (Hybrid broadcast broadband TV) is a service
3. Press to return to the Network menu. offered by certain broadcasters and available only on
some digital TV channels. HbbTV delivers interactive
4. If you want to check the Internet connectivity, press
television over broadband Internet. These interactive
▲/▼ to select Connecting test and press OK/►.
features are added to and enrich the normal digital
programmes, and include services such as digital
Networked waking up teletext, electronic programme guide, games, voting,
This function allows you to turn on your TV from specific information related to the current programme,
standby mode via a network. To use this function, interactive advertising, information magazines, catch-
please make sure: up TV, etc.
1. Your TV is connected to an effective home To use HbbTV please ensure your TV is connected to
network; Internet and HbbTV is switched on.

EN 15
 Using more of your TV

Notes: 1. Press on the remote control, select Support >

English

-- HbbTV services are broadcast- or country- E-manual and press OK/► to enter.
dependent and may be unavailable in your area. 2. Press ▲/▼/◄/► and OK to view the contents.
-- You cannot download files to your TV with Press to return to the previous page.
HbbTV function. 3. Press EXIT to exit.
-- Application provider or broadcasting related
conditions may cause an HbbTV application to Software update
be unavailable momentarily.
Note: Do not switch off or unplug the TV until the
-- To access HbbTV applications you must connect
upgrade is completed.
your TV to the Internet via a broadband link.
HbbTV applications may not work correctly in Press on the remote control, select Support >
case of network related issues. Software update and press OK/► to enter. You have
the following options to update the software.
HbbTV access -- By network: Enables you to download and install
1. Press on the remote control, select System > the latest version software from the Internet.
HbbTV settings > HbbTV and press OK/► to Make sure to set up a wired or wireless network
enter. connection first then select By network and press
OK/► to enter. Follow the on-screen instructions to
2. Press ▲/▼ to select On and press OK to confirm.
complete the process.
3. When you tune to a digital TV channel that offers
Note: Keep successful network connection during
HbbTV, this will be signalled to you by an on-
upgrade.
screen indication (generally a red button, but
other colour buttons may also be used). Press -- By channel: Enables you to install the latest version
the indicated colour button to open the interactive software if available from the broadcast. Select By
pages. channel and press OK/► to enter. Follow the on-
4. Use ▲/▼/◄/► and the colour buttons to navigate screen instructions to complete the process.
through the HbbTV pages and press OK to -- By USB: Enables you to install a new version
confirm. software from a USB stick. Insert the USB stick
in which a new version software is stored into a
HbbTV deactivation USB socket of the set. Select By USB and press
To avoid disturbances that may be caused by HbbTV OK/► to enter. Follow the on-screen instructions to
broadcasting tests, you can turn off the HbbTV complete the process.
function:
1. Press on the remote control, select System > Reset shop
HbbTV settings > HbbTV and press OK/► to Allows you to reset the TV to factory default settings.
enter.
1. Press on the remote control, select Support >
2. Press ▲/▼ to select Off and press OK to confirm. Reset shop and press OK/► to enter.
2. Use the numeric buttons to enter the password.
Instant power on 3. Press ◄/► to select OK and press OK to confirm.
It enables you to turn on your TV faster from standby 4. The Hello screen appears. Follow the on-screen
mode than turning this function off, but it will also instructions.
increase standby power consumption.
1. Press on the remote control, select System > Viewing pictures, playing music and
Advanced settings > Instant power on and
watching videos from a USB storage
press OK.
2. Press ▲/▼ to select On and press OK to confirm. device
3. Press to return to the previous menu. Your TV is fitted with USB connectors that enable
you to view pictures, listen to music or watch videos
stored on USB drives.
E-manual When a USB device is connected, press on the
E-manual is an electronic user manual for the product. remote control to display the source list. Press ▲/▼
You can find instructions for the features of this TV to select Media and press OK to enter.
set.

EN 16
 Using more of your TV

Supported file formats:

English
Picture JPEG, PNG, BMP
Music/Audio Container: MP3, AVI, AC3, AAC, FLV,
MKV
Codec: MPEG1 layer 3, MPEG2 layer
2/3, AC3, EAC3, AAC, LPCM
Video Container: AVI, MP4, TS, MKV, FLV
Codec: MPEG1/2/4, H.263, H.264,
H.265, VP8, VP9
Notes:
-- Some USB keys and USB products like
digital cameras or mobile phones are not fully
compatible with USB standard so they may not
work with the TV media player. Not all USB
keys or devices are compatible with the USB
function. Not all above formats are recognised.
The encoding formats of your files will determine
whether or not they can be played.
-- Please use high speed (minimum 5MB/s read
transfer) USB drives.

EN 17
 Chapter 5 - Other information
Password in Parental Control Operating Conditions
English

-- The default password is 1234. You can change it to Temperature 5°C - 35°C (41°F - 95°F)
a new one. Humidity 20 - 75% (non-condensing)
-- The super password is 0423. If you forget your Storage Conditions
code, enter the super password to override any
Temperature -15°C - 45°C (5°F - 113°F)
existing codes.
Humidity 10 - 90% (non-condensing)

Troubleshooting Radio Information

Please check the following list before requesting • 2.4G Wi-Fi transmitter frequency range:
service. 2412 - 2472MHz
• 2.4G Wi-Fi transmitter power: 16dBm (+/- 4dB)
There is no picture or sound.
• RF (BT) transmitter frequency range:
• Make sure the power cord is properly inserted in the
2402 - 2480MHz
power outlet.
• RF (BT) transmitter power: 2dBm (+/- 5dB)
• Make sure the source type is set correctly.
• DVB-T/T2/C tuner frequency range: 45 - 858MHz
• Make sure the antenna is properly connected.
• DVB-S/S2 tuner frequency range: 950 - 2150MHz
• Make sure the volume is not set to minimum or the
sound is not set to mute. OSS Notice
• Make sure the headphones are not connected.
To send inquires and requests for questions regarding
• The TV may be receiving a signal other than from open source, contact nearest TCL office.
TV broadcasting stations.
This product uses the GPL (Version 2 and 3) and
Picture is not clear. LGPL (version 2.1).
• Make sure the antenna cable is properly connected. This product uses some software programs which are
• Consider whether your TV signal is being properly distributed under the Independent JPEG Group.
received. This product uses some software programs which are
• Poor picture quality can occur due to a VHS distributed under the libpng Project.
camera, camcorder, or other peripheral being This product uses some software programs which are
connected at the same time. Switch off one of the distributed under the Freetype Project.
other peripherals. This product uses some software programs which are
• The ‘ghost’ or double image may be caused by distributed under the zlib Project.
obstruction to the antenna due to high-rise buildings This product uses some software programs (xml2,
or hills. Using a highly directional antenna may iniparser, curl, c-areas) which are distributed under
improve the picture quality. the MIT.
• The horizontal dotted lines shown on the pictures This product uses openssl which is distributed under
may be caused by electrical interference, e.g., hair the OpenSSL and SSLeay Apache License Project.
dryer, nearby neon lights, etc. Turn off or remove GPL software: Linux Kernel, uboot, busybox, mali,
these. glib, cario, fontconfig, alsa-lib, libogg, harfbuzz, webkit
Picture is too dark, too light or tinted. LGPL software: DFB (DirectFB), gstreamer, libgcrypt,
• Check the colour adjustment. pango, nl, mstreamer, iconv
• Check the brightness setting. BSD software: chromium, freetype2
• Check the sharpness function. GNU software: dosfstools
Remote control does not work. [Legal Statement] of TCL - manufacturer of this
• Check the batteries of the remote control. TV set
• Make sure the remote sensor window on the TV Due to the various capabilities of products featuring
front is not under strong fluorescent lighting. the SmartTV - Services, as well as limitations in the
• Try to clean the remote sensor window on the TV available content, certain features, applications, and
front with a soft cloth. services may not be available on all devices or in
all territories. Some features on SmartTV may also
If the above suggestions do not solve your technical
require additional peripheral devices or membership
issue, please refer to the warranty card for service
fees that are sold separately. Please visit our website
information.
for more information on specific device information
and content availability. The services and availability

EN 18
 Other information

of content through SmartTV are subject to change Third party services may be changed, suspended,

English
from time to time without prior notice. removed, terminated or interrupted, or access may be
disabled at any time, without notice, and TCL makes
All content and services accessible through this no representation or warranty that any content or
device belong to third parties and are protected by service will remain available for any period of time.
copyright, patent, trademark and/or other intellectual Content and services are transmitted by third parties
property laws. Such content and services are by means of networks and transmission facilities
provided solely for your personal noncommercial use. over which TCL has no control. Without limiting
You may not use any content or services in a manner the generality of this disclaimer, TCL expressly
that has not been authorized by the content owner disclaims any responsibility or liability for any change,
or service provider. Without limiting the foregoing, interruption, disabling, removal of or suspension
unless expressly authorized by the applicable content of any content or service made available through
owner or service provider, you may not modify, copy, this device. TCL may impose limits on the use of
republish, upload, post, transmit, translate, sell, create or access to certain services or content, in any
derivative works, exploit, or distribute in any manner case and without notice or liability. TCL is neither
or medium any content or services displayed through responsible nor liable for customer service related to
this device. the content and services. Any question or request for
YOU EXPRESSLY ACKNOWLEDGE AND AGREE service relating to the content or services should be
THAT USE OF THE DEVICE IS AT YOUR SOLE made directly to the respective content and service
RISK AND THAT THE ENTIRE RISK AS TO providers.
SATISFACTORY QUALITY, PERFORMANCE
AND ACCURACY IS WITH YOU. THE DEVICE
AND ALL THIRD PARTY CONTENT AND
SERVICES ARE PROVIDED “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED. TCL EXPRESSLY DISCLAIMS
ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE DEVICE AND ANY CONTENT
AND SERVICES, EITHER EXPRESS OR,
IMPLIED, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY, OF
SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, OF ACCURACY, OF
QUIET ENJOYMENT, AND NON-INFRINGEMENT
OF THIRD PARTY RIGHTS. TCL DOES NOT
GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF
ANY CONTENT OR SERVICE MADE AVAILABLE
THROUGH THIS DEVICE AND DOES NOT
WARRANT THAT THE DEVICE, CONTENT OR
SERVICES WILL MEET YOUR REQUIREMENTS,
OR THAT OPERATION OF THE DEVICE OR
SERVICES WILL BE UNINTERRUPTED OR
ERROR-FREE. UNDER NO CIRCUMSTANCES,
INCLUDING NEGLIGENCE, SHALL TCL BE LIABLE,
WHETHER IN CONTRACT OR TORT, FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, ATTORNEY FEES,
EXPENSES, OR ANY OTHER DAMAGES ARISING
OUT OF, OR IN CONNECTION WITH, ANY
INFORMATION CONTAINED IN, OR AS A RESULT
OF THE USE OF THE DEVICE, OR ANY CONTENT
OR SERVICE ACCESSED BY YOU OR ANY THIRD
PARTY, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.

EN 19
Legal terms of Freeview
Freeview Play is a free service provided by Digital UK, 27 Mortimer Street, London, UK
Availability of channels subject to geographic location and coverage. Aerial upgrade may be
required. Visit freeview.co.uk/availability.
Minimum 2Mbps broadband required for catch up and on demand services. Watching on
demand and catch up count towards monthly broadband data allowances. 7-day catch up for
selected channels.
The FREEVIEW words and logos are trade marks of DTV Services LTD. © DTV Services Ltd
To get the most up to date service from Freeview it is important for Freeview customers to
retune from time to time. Refer to section Installing channels for retuning instructions.

72-TCMS86-UKM1H