Generated from www.skf.
com on 2020-04-28
SNLN 3048 + 23048 CCK/W33 +
OH 3048 H
SNLN 30 plummer block housings for
bearings on an adapter sleeve
Technical Specification
APPROPRIATE PRODUCTS
Bearing 23048 CCK/W33
Adapter sleeve OH 3048 H
Locating ring 2FRB 10/360
DIMENSIONS
da 220 mm
Ca 112 mm
Da 360 mm
A 270 mm
A1 200 mm
H 423 mm
H1 210 mm
H2 75 mm
J 610 mm
L 720 mm
N 50 mm
N1 42 mm
ba 95 mm
bc 110 mm
Page 1 of 4
Generated from www.skf.com on 2020-04-28
J6 672 mm
J7 76 mm
N4 max. 16 mm
A2L 12.5 mm
A2T 42.5 mm
APPROPRIATE SEALS AND END COVER
2 x TSN 3048 S 2 x TNF 3048 ETS 3048
BREAKING LOADS, HOUSING
P55° 1880 kN
P90° 1130 kN
P120° 850 kN
Page 2 of 4
Generated from www.skf.com on 2020-04-28
P150° 750 kN
P180° 940 kN
Pa 330 kN
YIELD POINT, CAP BOLTS
Q120° 1430 kN
Q150° 825 kN
Q180° 715 kN
MASS
Mass housing 117 kg
MOUNTING INFORMATION
Cap bolt, size M 30 x 170
Cap bolt, rec. tightening torque 400 N·m
Appropriate attachment bolt, size G 36 mm
Appropriate attachment bolt, rec. tightening torque 2280 N·m
Eye bolt, size M12
Initial grease fill, 20% 1500 g
Initial grease fill, 40% 2800 g
Page 3 of 4
Generated from www.skf.com on 2020-04-28
Terms and conditions
By accessing and using this website / app of SKF Group, meaning AB SKF and / or any of its affiliates
("SKF"), you agree to the following terms and conditions:
Warranty Disclaimer and Limitation of Liability
Although every care has been taken to assure the accuracy of the information on this website / app,
SKF provides this information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. You acknowledge that your use of this website / app is at your sole
risk, that you assume full responsibility for all costs associated with use of this website / app, and that
SKF shall not be liable for any direct, incidental, consequential, or indirect damages of any kind arising
out of your access to, or use of the information or software made available on this website /
app. Any warranties and representations in this website / app for SKF products or services
that you purchase or use will be subject to the agreed upon terms and conditions in the contract for
such product or service. Further, for non-SKF websites / apps that are referenced in our
website / app or where a hyperlink appears, SKF makes no warranties concerning the accuracy or
reliability of the information in these websites / apps and assumes no responsibility for material
created or published by third parties contained therein. In addition, SKF does not warrant that this
website / app or these other linked websites / apps are free from viruses or other harmful
elements.
Copyright
Copyright in this website / app copyright of the information and software made available on this
website / app rest with SKF or its licensors. All rights are reserved. All licensed material will reference
the licensor that has granted SKF the right to use the material. The information and software made
available on this website / app may not be reproduced, duplicated, copied, transferred, distributed,
stored, modified, downloaded or otherwise exploited for any commercial use without the prior written
approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals
without prior written approval of SKF. Under no circumstances may this information or software be
supplied to third parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patents
All trademarks, brand names, and corporate logos displayed on the website / app are the property of
SKF or its licensors, and may not be used in any way without prior written approval by SKF. All
licensed trademarks published on this website / app reference the licensor that has granted SKF the
right to use the trademark. Access to this website / app does not grant to the user any license under
any patents owned by or licensed to SKF.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.
Page 4 of 4
