0% found this document useful (0 votes)
93 views2 pages

Tool Box Talk: Portable Electric Tools

This document provides safety guidelines for using portable electric tools. It instructs users to check that tools are properly grounded and undamaged before use. Cables and plugs should be inspected and the correct power supply must be used. The power cable must be long enough without strain and kept off the floor. Tools should only be used for their intended purposes and never on damp surfaces or with worn accessories. Defects should be reported immediately and personal protective equipment worn. Regular inspections and maintenance of electric tools is also advised.

Uploaded by

cio davinsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
93 views2 pages

Tool Box Talk: Portable Electric Tools

This document provides safety guidelines for using portable electric tools. It instructs users to check that tools are properly grounded and undamaged before use. Cables and plugs should be inspected and the correct power supply must be used. The power cable must be long enough without strain and kept off the floor. Tools should only be used for their intended purposes and never on damp surfaces or with worn accessories. Defects should be reported immediately and personal protective equipment worn. Regular inspections and maintenance of electric tools is also advised.

Uploaded by

cio davinsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Document type No.

:
Tool Box Talk
Title: Revision/Date:
Portable Electric Tools
Location: Issued by:

1 Before you use a portable electric tool, make sure that is properly earthed.
Sebelum anda menggunakan peralatan listrik portable, pastikan sudah terpasang grounding dengan baik.
2 Before using an electric tool, make sure that the casing is undamaged. If it is damaged,
don’t use the tool.
Sebelum menggunakan peralatan listrik, pastikan casing tidak rusak, jika rusak jangan dipakai.
3 Make sure that all cables and plugs are in good condition and adequately insulated.
Pastikan semua cable dan plug dalam kondisi baik dan terisolated
4 Use tools only on the correct power supply as instructed on the maker’s label.
Gunakan peralatan hanya pada power supply yang diinstruksikan pada labelnya.
2 Make sure that the power cable is long enough to reach your working place without
straining it.
Pastikan cable power cukup panjangnya sampai ketempat kita bekerja
6 Keep power cables off the floor where possible. They may get damaged or trip someone.
Jaga posisi cabel power diatas lantai jika memungkinkan, agar tidak rusak atau trip oleh seseorang
6 Never stand on a damp or wet surface when using electrical equipment and keep the
equipment clean and dry.
Jangan pernah menaruh diatas permukaan yang basah ketika menggunakan alat listrik dan pastikan dalam
keadaan bersih dan kering.
8 Never use a portable tool for work for which it is not intended.
Jangan pernah menggunakan alat listrik untuk bekerja jika bukan keperluannya.
9 Never connect a portable electrical tool to a lighting socket.
Jangan pernah menghubungkan peralatan listrik portale pada socket lampu
10 Never use worn, blunt or damaged bits or other accessories.

11 Disconnect when not in use.


Cabut power supply jika tidak digunakan
12 Electric power tools should be regularly inspected and subjected to planned
maintenance.
Peralatan listrik harus diinspeksi secara berkala dan merencanakan untuk pemeliharaan
13 All portable electric tools must be 110V.

14 Wear Personal Protective Equipment appropriate for the process (e.g. ear defenders, eye
protection, face mask, gloves etc.).
Selalu pakai PPE tambahan sesuai dengan pekerjaan yang kita kerjakan

REPORT ALL DEFECTS IMMEDIATELY


Laporkan semua kerusakan secepatnya

Has Any One Any Questions Or Queries?


Document type No.:
Tool Box Talk
Title: Revision/Date:
Portable Electric Tools
Location: Issued by:

Personnel in Attendence Personnel in Attendence


Name Signature Position Name Signature Position

Comments

Supervisor: Further action needed? YES NO

Date:

You might also like