Scribd
Upload
97 views1 page

SPLE303 - Reinforced Concrete Design 5

This document outlines minimum concrete cover requirements for cast-in-place and precast concrete in the Philippines. It specifies the minimum concrete cover for rebar based on the rebar size and the exposure of the concrete. For cast-in-place concrete, the minimum cover ranges from 15mm to 75mm depending on the rebar size and whether the concrete is exposed to earth or weather. For precast concrete manufactured in a plant, the minimum cover ranges from 10mm to 40mm.

Uploaded by

John Bernalte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views1 page

SPLE303 - Reinforced Concrete Design 5

This document outlines minimum concrete cover requirements for cast-in-place and precast concrete in the Philippines. It specifies the minimum concrete cover for rebar based on the rebar size and the exposure of the concrete. For cast-in-place concrete, the minimum cover ranges from 15mm to 75mm depending on the rebar size and whether the concrete is exposed to earth or weather. For precast concrete manufactured in a plant, the minimum cover ranges from 10mm to 40mm.

Uploaded by

John Bernalte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

National Structural Code of the Philippines

Minimum Concrete Cover


Cast-in Place Concrete Precast Concrete
(Non prestressed) (Manufactured Under Plant Conditions)
Minimum Minimum
Cover, mm Cover, mm
(a) Concrete cast against and permanently 75 (a) Concrete exposed to earth or weather:
exposed to earth
Wall panels :
(b) Concrete exposed to earth or weather:
32mm bar and smaller 20
20mm through 36mm bars 50
Other members :
16mm bar, W31 or D31 wire, and smaller 40 20mm through 32mm bars 40
16mm bar, W31 or D31 wire, and smaller 30
(c) Concrete not exposed to weather or in
contact with ground: (b) Concrete not exposed to weather or in
contact w/ ground
Slabs, Walls, Joists:
32mm bar and smaller 20 Slabs, walls, Joists:
32 bar and smaller 15
Beams, Columns
Primary Reinforcement, ties, stirrups, 40 Beams, Columns :
Primary Reinforcement Db ≥15≤40
Spirals shells, folded place members :
Ties, stirrups, spirals 10
20mm bar and larger 20
16mm bar, W31 or D31 wire & smaller 15 Shells, folded plate members:
20mm bar and larger 15
16mm bar, W31 or D31 wire and smaller 10

Reinforced Concrete Design


Civil Engineering Design & Construction 1 2
T
TRAINING LEVEL

You might also like