((Q))1_// Corrosion of metals involves ______
((A))Physical reactions
((B))Chemical reactions
((C))Both
((D))None
((E))B
((F))
((Q))1_//Corrosion is defined as __________
((A))The deterioration of a metal by reaction with its environment
((B))Physico-chemical interaction between a metal and its environment
((C))Loss of metal due to chemical reaction between anode, cathode and electrolyte
((D))All the above
((E))D
((F))
((Q))1_//The following factors play vital role in corrosion process
((A))Temperature
((B))Solute concentration
((C))Both
((D))None
((E))C
((F))
((Q))1_//Following equation is related to corrosion rate
((A))Nernst equation
((B))Faraday’s equation
((C))Either
((D))Neither
((E))B
((F))
((Q))1_//Passivity is due to ____
((A))Higher EMF
((B)) Lower EMF
((C))Oxide film
((D)) All
((E))C
((F))
((Q))1_//Corrosin give large impact on SHE, that is ___________
((A))Shell, Harvest, and Equation
((B))Stamp, Heat and Equilateral
((C))Safety, Health and Environment
((D))None
((E))C
((F))
((Q))1_//One of the following metal do not corrode
((A))Steel
((B))Cast Iron
((C))Aluminium
((D))None
((E))C
((F))
((Q))1_//One of the following metal do not corrode
((A))Low carbon steel
((B))Medium carbon steel
((C))High carbon steel
((D))None
((E))D
((F))
((Q))1_//For corrosion to take place, there is need of ______
((A))Only anode
((B))Only anode and cathode
((C))Only anode, cathode and electrolyte
((D))None
((E))C
((F))
((Q))1_//If film formed due to corrosion is protective then corrosion rate_
((A))Increases
((B))Decreases
((C))May decrese or increases depend on material
((D))Remain same
((E))B
((F))
((Q))1_//When P.B.R. is < 1, then film is ______
((A))Porous
((B))Non-porous
((C))Protective
((D))None
((E))A
((F))
((Q))1_//When P.B.R. is > 1, then film is ______
((A))Porous
((B))Non-porous
((C))Non protective
((D))None
((E))B
((F))
((Q))1_//In electrochemical corrosion at cathode which type of chemical reaction taking place
((A))Metallic reaction
((B))Reduction reaction
((C))Oxidation reaction
((D))None
((E))B
((F))
((Q))1_//One of the following metal do not corrode
((A))Aluminium
((B))Copper
((C))Silver
((D))All the above
((E))D
((F))
((Q))1_//Extent of corrosion and protective value depends on____
((A))Chemical affinity
((B))Protective value of film
((C))Nature of film
((D))All the above
((E))D
((F))
((Q))1_//The natural tendency of a metal to revert back to its original form due to corrosion is termed as
___
((A))Stress corrosion
((B))Corrosion fatigue
((C))General corrosion
((D))Corrosion cycle
((E))D
((F))
((Q))1_//The metals stated below are very sensitive to corrosion
((A))Silver
((B))Gold
((C))Copper
((D))None
((E))D
((F))
((Q))1_//One of the following metals is highly corrodent
((A))Cast Iron
((B))High carbon steel
((C))Mild steel
((D))All the above
((E))D
((F))
((Q))1_//In electrochemical corrosion at cathode which type of chemical reaction taking place
((A))Peretectic reaction
((B))Eutectic reaction
((C))Eutectiod reaction
((D))None
((E))D
((F))
((Q))1_//In electrochemical corrosion at anode which type of chemical reaction taking place
((A))Eutectic reaction
((B))Eutectiod reaction
((C))Peretectic reaction
((D))Oxidation reaction
((E))
((F))
((Q))1_//Which of the factor given below infulencing corrosion of steel
((A))Temperature
((B))Oxygen in atmosphere
((C))Moisture
((D))All the above
((E))D
((F))
((Q))1_//Dry corrosion is taking place due to ___
((A))When carbon dioxide in air reacts with metal
((B))When nitrogen in air reacts with metal
((C))When oxygen in air reacts with metal
((D))None
((E))C
((F))
((Q))1_//Difficult to monitor and very dangerous form of corrosion
((A))Galvanic
((B))Pitting
((C))Crevice
((D))Stress
((E))B
((F))
((Q))1_//What is the nature of oxide film formed on the ferrous metal due to reaction with atmosphere?
((A))Porous
((B))Non-porous
((C))Silky
((D))All the above
((E))D
((F))
((Q))1_//What is the nature of oxide film formed on the alluminium and copper metal due to reaction with
atmosphere?
((A))Porous
((B))Silky
((C))Non-porous
((D))None
((E))C
((F))
((Q))1_//This form of corrosion occurs due to concentration difference in a component
((A))Uniform
((B))Galvanic
((C))Inter-granular
((D))Stress
((E))C
((F))
((Q))1_//Main form of ceramic degradation
((A))Corrosion
((B))Weathering
((C))Dissolution
((D))Swelling
((E))C
((F))
((Q))1_//The following influences deterioration of polymers
((A))Weather
((B))Radiation
((C))Temparature
((D))All
((E))D
((F))
((Q))1_//Following is not the main form of polymer deterioration
((A))Corrosion
((B))Swelling and Dissolution
((C))Weathering
((D))Scission
((E))A
((F))
((Q))1_//When Pt and Co are electrically connected, which one gets corroded
((A))Pt
((B))Co
((C))None
((D))Can’t decide
((E))B
((F))
((Q))1_//Which of the following can be used for cathodic protection:
((A))Al
((B))Cd
((C))Cu
((D))Either
((E))A
((F))
((Q))1_//Passivity is not reason for inertness of the following
((A))Au
((B))Al
((C)) Ti
((D))Ni
((E))A
((F))
((Q))1_//Wet corrosion is based on which phenomena
((A))Electro-mechanical
((B))Electro-chemical
((C))Electro-biological
((D))None
((E))B
((F))
((Q))1_//General corrosion is also known as___
((A))Uniform corrosion
((B))Localised corrosion
((C))Harmless corrosion
((D))All the above
((E))A
((F))
((Q))1_//The best example of general corrosion is ____
((A))Corrosion of manhole cover
((B))Corrosion of springs
((C))Corrosion of fasteners
((D))None
((E))A
((F))
((Q))1_//The best and economical way of preventing general corrosion is_
((A))Coating the metal
((B))Cathodic protection
((C))Using proper inhibitors
((D))All
((E))D
((F))
((Q))1_//Galvanic corrosion is also known as ______
((A))Bimetallic corrosion
((B))Dry corrosion
((C))High temperature corrosion
((D))None
((E))A
((F))
((Q))1_//Pitting corossion is also known as ____
((A))Low temperature corrosion
((B))Dry corrosion
((C))High temperature corrosion
((D))None
((E))D
((F))
((Q))1_//Pitting corossion is also known as ____
((A))Highly localised corossion
((B))Low temperature corrosion
((C))High temperature corrosion
((D))Bimetallic corrosion
((E))A
((F))
((Q))1_//Pitting corossion is also known as bimetallic corrosion the statement is ___
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//Galvanic corrosion is highly localised corrosion the statement is _
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//Crevice corrosion is also a localised attack, the statement is __
((A))FALSE
((B))TRUE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//In galvanic corrosion as the area of anode metal decreases with respect tocathode area of metal, the
corrosion rate _
((A))Increases
((B))Decreases
((C))1
((D))None
((E))A
((F))
((Q))1_//Phenomenon of crevice corrosion is based on____
((A))Electro-mechanical corrosion
((B))Electro-chemical corrosion
((C))Electro-biological corrosion
((D))None
((E))B
((F))
((Q))1_//Crevice Corrosion rate becomes faster due to_____
((A))Gases in the liquid or electrolyte
((B))High flow of liquid or electrolyte
((C))Trapped stagnant liquids which is highly conecentrated
((D))None
((E))C
((F))
((Q))1_//Intergranular corrosion takes place at which portion of grain
((A))Phases in grain
((B))Inclusions In grain
((C))Grain boundary
((D))Twin boundary
((E))C
((F))
((Q))1_//In case of stainless steels, which of following effect is seen after welding
((A))Granitization
((B))Sensitization
((C))Graphitization
((D))None
((E))B
((F))
((Q))1_//Which of the following element precipitate on the grain boundary, when stainless steel gets
sensitized
((A))Vanadium carbide
((B))Molybdenum carbide
((C))Tungsten carbide
((D))Chromium carbide
((E))D
((F))
((Q))1_//When grain boundary become susceptible to corrsion, due to chromium carbide in stainless steel, this stage o
metal is known as _
((A))Graphitization
((B))Chromitization
((C))Sensitization
((D))None
((E))C
((F))
((Q))1_//In case of intergrannular corrosion, when grain boundary become rich in chromium then the % of chromium a
depleted region will become __
((A))Lower than 12%
((B))More than 12%
((C))Equal to 12%
((D))None
((E))A
((F))
((Q))1_//What is mean by K.L.A. ?
((A))Kinetic Low Alloy
((B))Knife Low Alloy
((C))Knife Line Alloy
((D))Knife Line Attack
((E))D
((F))
((Q))1_//K.L.A. is which type of corrosion?
((A))Bimetallic corrosion
((B))General corrosion
((C))Inter-granular corrosion
((D))All of the above
((E))C
((F))
((Q))1_//One of the following step is used to control the intergrannular corrosion in stainless steel.
((A))Use of metal coating
((B))Use of cathodic protection
((C))Use of anodic protection
((D))Use of low carbon grade of stainless steel
((E))D
((F))
((Q))1_//One of the following step is used to control the intergrannular corrosion in stainless steel.
((A))Electro plating
((B))Use of stabilised grade of stainless steel
((C))Use of special inhibitor
((D))All the above
((E))B
((F))
((Q))1_//Which of the following is a velocity related corrosion attack?
((A))Impingement corrosion
((B))Cavotation corrosion
((C))Errosion corrossion
((D))All the above
((E))D
((F))
((Q))1_//One of the following is a velocity related corrosion attack in the pipeline
((A))General corrosion
((B))Galvanic corrosion
((C))Intergrannular corrosion
((D))None
((E))D
((F))
((Q))1_//One of the following is a velocity related corrosion attack in the pipeline
((A))Impingement corrosion
((B))Crevice corrosion
((C))Bimetal corrosion
((D))General corrosion
((E))A
((F))
((Q))1_//One of the following is a velocity related corrosion attack due to fluid flow
((A))Impingement corrosion
((B))Intergrannular corrosion
((C))Bimetal corrosion
((D))General corrosion
((E))A
((F))
((Q))1_//One of the following is a velocity related corrosion attack due to fluid flow
((A))Erossion corrosion
((B))Galvanic corrosion
((C))Uniform corrosion
((D))None
((E))A
((F))
((Q))1_//One of the following is a velocity related corrosion attack due to fluid flow
((A))Cavitation corrosion
((B))Uniform corrosion
((C))Galvanic corrosion
((D))Intergrannular corrosion
((E))A
((F))
((Q))1_//Erosion corrosion can be defined as _______
((A))Precipitation of hard carbides at grain boundary
((B))Corrosion reaction which is accelerated by relative movement between a corrosive fluid and metal
surface
((C))Corrosion reaction due to bubbles flowing through the fluid gets burst
((D))None
((E))B
((F))
((Q))1_//The rate of erosion corrosion is vary with velocity of fluid. The statement is __
((A))FALSE
((B))TRUE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//One of the following is a measure to control erosion corrosion
((A))Selection of resistant materials
((B))Decreasing the flow velocity
((C))Minimizing turbulence
((D))All the above
((E))D
((F))
((Q))1_//One of the following is a measure to control erosion corrosion
((A))Decreasing the flow velocity
((B))Coating the metal surface
((C))Increasing the temperature of fluid
((D))None
((E))A
((F))
((Q))1_//Hard particles or sand particles in a flowing fluid, causes which type of corrosion
((A))Cavitation corrosion
((B))Erosion corrosion
((C))Impingement corrosion
((D))None
((E))C
((F))
((Q))1_//The corrosion profile of a erosion corrosion shows_____
((A))A smooth surface profile with directional pattern
((B))Very rough surface with grooves
((C))Very shiny surface
((D))All the above
((E))A
((F))
((Q))1_//Stress corrosion cracking is a combined effect of ____
((A))Temperature and time
((B))Velocity and fluid
((C))Acidity and stress
((D))Corrosive environment and mechanical stress
((E))D
((F))
((Q))1_//Stress corrosion cracking is _____
((A))Intergrannular cracking
((B))Transgranular cracking
((C))Slow cracking
((D))None
((E))A
((F))
((Q))1_//Hydrogen blistering is happen only because of______
((A))Atomic oxygen that enters in steel
((B))Atomic hydrogen that enters in steel
((C))Atomic nitrogen that enters in steel
((D))None
((E))B
((F))
((Q))1_//Corrosion fatigue cracking is a combined effect of_____
((A))Strain and corrosion
((B))Stress and corrosion
((C))Cyclic stress and corrosion
((D))None
((E))C
((F))
((Q))1_//Cracking due to corrosion fatigue is mainly combine effect of _
((A))Temperature and fluid flow
((B))Fluid velocity and stress
((C))Stress and corrosion
((D))None
((E))D
((F))
((Q))1_//Fatigue life of a metal in air is better than fatigue life in sea water this statement is _
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))A
((F))
((Q))1_//Fatigue fracture is always initiated at_____
((A))Discontinuity on the surface
((B))Discontinuity in the centre of metal
((C))Without any discontinuity in the metal
((D))None
((E))A
((F))
((Q))1_//The best example of High temperature corrosion is _
((A))Creep failure
((B))Oxidation
((C))High temperature hydrogen attack
((D))All the above
((E))D
((F))
((Q))1_//The rate of corrosion increases as the temperature increases. The statement given is__
((A))FALSE
((B))TRUE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//Metallic component gets fatigue due to which type of stresses applied
((A))Tensile stress
((B))Compessive stress
((C))Shear stress
((D))Cyclic stress
((E))D
((F))
((Q))1_//One of the following method is not a corrosion preventive method
((A))Internal and external coating
((B))Corrosion inhibitor
((C))Cathodic and anodic protection
((D))All the above
((E))D
((F))
((Q))1_//One of the following method is not a corrosion preventive method
((A))Use of special alloy
((B))Removal of corrosive gases
((C))Dehydration
((D))All the above
((E))D
((F))
((Q))1_//None metallic are more durable than metallic coating. The statement is __
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))
((F))
((Q))1_//Metallic coatings give best protection against corrosion over non-metallic coatings. The given
statement is______
((A))TRUE
((B))Not applicable to it
((C))FALSE
((D))None
((E))A
((F))
((Q))1_//Non-metallic coatings give best protection against corrosion over metallic coatings. The given
statement is______
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//Metallic coatings are more durable than non-metallic coatings. The statement is ___
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))A
((F))
((Q))1_//One of the following method is a metallic coating method for protection from corrosion
((A))Metal spraying
((B))Electroplating
((C))Metal cladding
((D))All the above
((E))D
((F))
((Q))1_//In hot dipping process liquid metal of zinc is never used in any case. This statement is
______
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//In hot dipping method of metal coating which metal is coated on steel to protect from
corrosion?
((A))Silver
((B))Aluminium
((C))Chromium
((D))Zinc
((E))D
((F))
((Q))1_//In hot dipping method of metal coating which metal is coated on steel to protect from
corrosion?
((A))Copper
((B))Silver
((C))Aluminium
((D))None
((E))D
((F))
((Q))1_//In electroplating process for metal coating, the metallic componenton which coating is needed is made____
in the process
((A))Anode
((B))Cathode
((C))Electrolyte solution
((D))None
((E))B
((F))
((Q))1_//In electroplating process for metal coating, the metallic componenton which coating is needed is made on ano
process. The statement is ______
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))A
((F))
((Q))1_//One of the following is a meatl used for metallic coating used for protection from
corrosion
((A))Phosphate coating
((B))Chromate coating
((C))Plastic coating
((D))None
((E))D
((F))
((Q))1_//One of the following is a non-metallic coatings, used for protection from corrosion
((A))Chromate coating
((B))Phosphate coating
((C))Plastic coating
((D))All the above
((E))D
((F))
((Q))1_//Corrosion inhibitors are used to protect the metal from corrosion. This statement is____
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))A
((F))
((Q))1_//Corrosion inhibitors are applied on the metal by electroplating process. The statement is__
((A))TRUE
((B))FALSE
((C))Not applicable to it
((D))None
((E))B
((F))
((Q))1_//One of the following is main application of corrosion inhibitors.
((A))Power plant
((B))Engine cooling system
((C))Pipeline carrying hydrocarbons
((D))All the above
((E))D
((F))
((Q))1_//One of the following inhibitor which is used in metal protection
((A))Zinc
((B))Aluminium
((C))Copper
((D))None
((E))D
((F))
((Q))1_//One of the following method is a cathodic protection method.
((A))Metal cladding
((B))Metal spraying
((C))Hot dipping
((D))None
((E))D
((F))
((Q))1_//One of the following method is a cathodic protection method.
((A))Metal spraying
((B))Metal cladding
((C))Eletroplating
((D))Sacrificial anode
((E))D
((F))
((Q))1_//One of the following is a corrsion resistance alloy.
((A))Stainless steel
((B))Nickel base alloy
((C))Cobalt base alloy
((D))All the above
((E))D
((F))
((Q))1_//Dehydration is nothing but______
((A))Removal of metal
((B))Removal of water
((C))Removal of matter
((D))None
((E))B
((F))
((Q))1_//One of the following is a main advantage of impressed current method
((A))Applicable to large objects
((B))Uncoated parts can be protected
((C))can protect underground steel structures
((D))All the above
((E))D
((F))
((Q))1_//One of the following is a main advantage of sacrificial anode method
((A))External power supply is not required
((B))Minimum maintenance
((C))Very easy to operate
((D))All the above
((E))D
((F))
((Q))1_//In the above fig. corrosion of which element will be more
((A))Cu
((B))Fe
((C))Both A & B
((D))None
((E))B
((F))
((Q))1_//In the above fig. corrosion of which element
will be more
((A))
((B))
((C))
((D))
((E))
((F))
