Scribd
Upload
82 views4 pages

Industrial Temperature Invigilation &alerting Sysytem Through Voice.

This document describes an industrial temperature monitoring and alerting system using voice. The system measures temperature values from different zones using temperature sensors and displays the values on an LCD screen. If the temperature reaches a critical level, the system will announce an alert message using a voice integrated circuit and speaker. It uses a microcontroller to read analog temperature sensor values with an analog-to-digital converter, display the digital values on an LCD, and trigger voice alerts when necessary. The goal is to develop a data logging system to monitor furnace temperatures in industries.

Uploaded by

Pooja Ban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
82 views4 pages

Industrial Temperature Invigilation &alerting Sysytem Through Voice.

This document describes an industrial temperature monitoring and alerting system using voice. The system measures temperature values from different zones using temperature sensors and displays the values on an LCD screen. If the temperature reaches a critical level, the system will announce an alert message using a voice integrated circuit and speaker. It uses a microcontroller to read analog temperature sensor values with an analog-to-digital converter, display the digital values on an LCD, and trigger voice alerts when necessary. The goal is to develop a data logging system to monitor furnace temperatures in industries.

Uploaded by

Pooja Ban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

INDUSTRIAL TEMPERATURE INVIGILATION &ALERTING

SYSYTEM THROUGH VOICE.


AIM:
The main aim of the Project is to measure temperature values from different zones in
industry and this temperature values are displayed on LCD.

PURPOSE:
The purpose of this project is to develop a data logging system for furnaces in
industries.

METHODOLOGY:

BLOCK DIAGRAM:

POWER LCD
SUPPLLY ENCODER

TEMPERATURE SENSOR1

A
TEMPERATURE SENSOR2 MICRO
D
CONTROLLER VOICE IC
TEMPERATURE SENSOR3 C
UNIT

TEMPERATURE SENSOR4
SPEAKER
POWER SUPPLY:

Step Down Bridge Filter


Regulator
Transformer Rectifier Circuit section

DESCRIPTION:

Every system is automated in order to face new challenges in the present day situation.
Automated systems have less manual operations, so that the flexibility, reliabilities are high and
accurate. Hence every field prefers automated control systems. Especially in the field of
electronics automated systems are doing better performance.

In this project, the inputs are the sensors. There are four temperature sensors and the
output of these sensors is the analog one. But in our project, microcontroller accepts only the
digital values. So for the conversion of analog to digital values we are placing the ADC circuitry
to convert those analog values to digital one. The digital outputs are given as an input to the
microcontroller. The outputs of these parameters are displayed on the LCD and then announcing
a particular message from voice IC through the speaker attached to it.

SOFTWARE USED:

1. Embedded C
2. Keil IDE

3. Uc-Flash
HARDWARE USED:

1. Micro controller
2. Power supply
3. Temperature sensors
4. ADC
5. LCD
6. Voice IC
RESULT:

Hence, by implementing this project we can protect the devices from burning due to high
Temperature.

You might also like