Scribd
Upload
42 views

40untitled Extract Pages

This document defines various technical terms used in structural steel design and construction. Some key terms defined include: - Distortional stiffness, which refers to the out-of-plane flexural stiffness of a web. - Double curvature, which describes the deformed shape of a beam with one or more inflection points within its span. - Effective length, which is the length of an identical compression member with the same strength when analyzed with simple end conditions. - Factored load, which is the product of a load factor and the nominal load used in design. - Fatigue, which refers to the limit state of crack initiation and growth from repeated application of live loads.

Uploaded by

qc_531040655
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

40untitled Extract Pages

This document defines various technical terms used in structural steel design and construction. Some key terms defined include: - Distortional stiffness, which refers to the out-of-plane flexural stiffness of a web. - Double curvature, which describes the deformed shape of a beam with one or more inflection points within its span. - Effective length, which is the length of an identical compression member with the same strength when analyzed with simple end conditions. - Factored load, which is the product of a load factor and the nominal load used in design. - Fatigue, which refers to the limit state of crack initiation and growth from repeated application of live loads.

Uploaded by

qc_531040655
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AISC_PART 16_A_Prelims_15th Ed.

_2016 2016-11-15 11:23 AM Page xliv (Black plate)

16.1-xliv GLOSSARY

Distortional stiffness. Out-of-plane flexural stiffness of web.


Double curvature. Deformed shape of a beam with one or more inflection points within the span.
Double-concentrated forces. Two equal and opposite forces applied normal to the same
flange, forming a couple.
Doubler. Plate added to, and parallel with, a beam or column web to increase strength at
locations of concentrated forces.
Drift. Lateral deflection of structure.
Effective length factor, K. Ratio between the effective length and the unbraced length of the
member.
Effective length. Length of an otherwise identical compression member with the same
strength when analyzed with simple end conditions.
Effective net area. Net area modified to account for the effect of shear lag.
Effective section modulus. Section modulus reduced to account for buckling of slender com-
pression elements.
Effective width. Reduced width of a plate or slab with an assumed uniform stress distribu-
tion which produces the same effect on the behavior of a structural member as the actual
plate or slab width with its nonuniform stress distribution.
Elastic analysis. Structural analysis based on the assumption that the structure returns to its
original geometry on removal of the load.
Elevated temperatures. Heating conditions experienced by building elements or structures
as a result of fire which are in excess of the anticipated ambient conditions.
Encased composite member. Composite member consisting of a structural concrete member
and one or more embedded steel shapes.
End panel. Web panel with an adjacent panel on one side only.
End return. Length of fillet weld that continues around a corner in the same plane.
Engineer of record. Licensed professional responsible for sealing the design drawings and
specifications.
Expansion rocker. Support with curved surface on which a member bears that is able to tilt
to accommodate expansion.
Expansion roller. Round steel bar on which a member bears that is able to roll to accom-
modate expansion.
Eyebar. Pin-connected tension member of uniform thickness, with forged or thermally cut
head of greater width than the body, proportioned to provide approximately equal strength
in the head and body.
Factored load†. Product of a load factor and the nominal load.
Fastener. Generic term for bolts, rivets or other connecting devices.
Fatigue†. Limit state of crack initiation and growth resulting from repeated application of
live loads.
Faying surface. Contact surface of connection elements transmitting a shear force.
Filled composite member. Composite member consisting of an HSS or box section filled
with structural concrete.

Specification for Structural Steel Buildings, July 7, 2016


AMERICAN INSTITUTE OF STEEL CONSTRUCTION

You might also like