Scribd
Upload
53 views2 pages

Aquila: Specifications and Features

The Aquila is a hydraulic top hammer production drill mounted on an articulated carrier for mobility underground. It has both diesel and electric power sources for maximum production and can drill holes from 1 5/8 to 4 inches in diameter to depths greater than 65 feet.

Uploaded by

Fernandes Latox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views2 pages

Aquila: Specifications and Features

The Aquila is a hydraulic top hammer production drill mounted on an articulated carrier for mobility underground. It has both diesel and electric power sources for maximum production and can drill holes from 1 5/8 to 4 inches in diameter to depths greater than 65 feet.

Uploaded by

Fernandes Latox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Specifications and Features

Aquila
The Aquila drill is a hydraulic top hammer production drill, mounted on a mobile center
articulated carrier designed for high mobility in underground mines. The Aries is dual
powered with both diesel and electric hydraulic systems for maximum production.

**

**Note: The length of the mast may very depending upon configuration / options.

PERFORMANCE

The Aquila Top Hammer drill can be used to drill from 1 5/8 in. (41 mm) to 4 in. (102
mm) diameter holes to a depth greater than 65 ft. (20 m).

CUBEX LIMITED 1218 Redonda Street, Box 13, Group 524, RR 5 Winnipeg, Manitoba, Canada R2C 2Z2
Phone: (204) 694-5505 Fax: (204) 633-0665
www.cubex.net
Feed Positioning

Drill shown with ITH conversion

Turning Radius

You might also like