M65 Antenna Series

HYBRID MULTI BAND ANTENNA ARRAY

Model HBSA-M65-19R010-62

The CCI RET Series Hybrid Multi Band Antenna Array is an industry first LTE ready hy-
brid phased array that supports multiple sectors (one low band, two high bands) from a single
antenna and provides capability for 700 MHz , SMR 800 MHz, Cellular 850 MHz, PCS 1900
MHz, and AWS 1710/2155 MHz coverage in a single, compact enclosure. Our unique hybrid
design, 6 ft high and 12.8 inches wide, combining standard 65° and patented bi-sector tech-
nology, maximizes coverage in a standard tri-sector cell plan, provides optimized overlap
between pairs of asymmetric beams, lowers soft handover losses in UMTS/HSPA+ and
CDMA/EVDO systems, and minimizes interference between sectors. Such an approach en-
hances data transfer rates within UMTS/LTE and EVDO network sectors and addresses
“hotspots” in mobile wireless operator networks for SMR, GSM, CDMA, UMTS and LTE tech-
nologies.
The remote electrical tilt (RET) Series Multi Band Bi-Sector Array enables operators to
remotely control the electrical down-tilt of the antenna in the field with sealed AISG compliant
RET actuators. The CCI RET system is designed to meet the reliability, flexibility and
efficiency requirements in a wide range of environments. The RET actuators are fully AISG
compliant, software upgradeable, daisy chaining capable and fully weather resistant. The
remote electrical capability allows independent adjustment of sub-beams for easier
optimization.
The single panel design of the hybrid phased array offers the opportunity to reduce antenna
count and directly replaces an existing 65° antenna. The new coverage that matches the
existing footprint minimizes the need for optimization and adjacent site changes, and allows
Hybrid Multi Band for significant CAPEX and OPEX cost savings.

Antenna Array All CCI antennas are manufactured under ISO 9001.

Features
Benefits
Multi band applications – 700 MHz,  Unique hybrid phase array combining standard 65° over a frequency range of (698-
SMR 800 MHz, Cellular 850 MHz, 824 MHz) and asymmetric 33° Bi-Sector array over a frequency range of (1710-2170
PCS 1900 MHz, AWS 1710/2155 MHz), optimized to match existing cloverleaf (65°) deployments.
MHz  Slim and low weight single panel design supporting 3 beams without mount changes
 Independent adjustable beams provide unmatched optimization flexibility
Enables efficient evolution of
wireless networks  Separate Low-band and High-band ports
 3GPP/AISG 2.0 compliant
Increase site capacity through higher
 Daisy chaining capability
order sectorization
 Software upgradeable
Avoid carrier-adds and building of  Rugged, weather resistant and highly reliable internal design
new capacity sites
Boosts data throughput by lowering
interference Applications
Unique hybrid phased array design,  Upgrade of data-throughput or capacity constrained sites
maximizes coverage in a standard  Spectrum limited markets
tri-sector cell plan  Deferral of CDMA/EVDO or UMTS//HSPA+ carrier adds
Provides remote control of electrical  Spectrum clearing and refarming
downtilt of antenna for easier
optimization

www.cciproducts.com Extending Wireless Performance

8/22/2013 Page 1 Revision 1.1
 M65 Antenna Series

HYBRID MULTI BAND ANTENNA ARRAY

Model HBSA-M65-19R010-62

HBSA-M65 Antenna Array

Electrical Specifications
2 X Low Band Ports which cover 4 X High Band Ports which cover the full range from
the full range from 698-894 MHz 1710-2170 MHz
Frequency Range
1710-1755/2110-2155
698-806 MHz 824-894 MHz 1850-1990 MHz
MHz
Gain 14.5 dBi 15.2 dBi 18.5 dBi 18.0 dBi 19.4 dBi
Azimuth Beamwidth (-3dB) 68.0° 63.5° 30.0° 33.0° 27.0°
Elevation Beamwidth (-3dB) 12.0° 10.5° 5.7° 6.2° 5.1°
Electrical Downtilt 2° to 10° 2° to 10° 0° to 8° 0° to 8° 0° to 8°
Elevation Sidelobes (1st Upper) < -18 dB < -18 dB < -18 dB < -18 dB < -18 dB
Front-to-Back Ratio @180° > 30 dB > 30 dB > 30 dB > 30 dB > 30 dB
Front-to-Back Ratio over ± 20° > 25 dB > 25 dB > 30 dB > 30 dB > 30 dB
Cross-Polar Discrimination (at Peak) > 25 dB > 25 dB > 22 dB > 22 dB > 22 dB
Cross-Polar Discrimination (at ± 30°) > 20 dB > 20 dB > 20 dB > 20 dB > 20 dB
Cross-Polar Port-to-Port Isolation > 25 dB > 25 dB > 25 dB > 25 dB > 25 dB
VSWR < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1 < 1.5:1
Passive Intermodulation (2x20W) ≤ -150dBc ≤ -150dBc ≤ -150dBc ≤ -150dBc ≤ -150dBc
Input Power 500 Watts CW 500 Watts CW 300 Watts CW 300 Watts CW 300 Watts CW
Polarization Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45° Dual Pol 45°
Input Impedance 50 Ohms 50 Ohms 50 Ohms 50 Ohms 50 Ohms
Lightning Protection DC Ground DC Ground DC Ground DC Ground DC Ground

Mechanical Specifications
Dimensions (LxWxD) 72.0 x 12.8 x 9.0 inches (1828 x 324 x 229 mm)
Survival Wind Speed > 125 mph (> 201 km/hr )
Front Wind Load 219 lbs (973 N) @ 100 mph (161 kph)
Side Wind Load 165 lbs (735 N) @ 100 mph (161 kph)
Equivalent Flat Plate Area 8.5 ft2 (0.8 m2)
Weight (without Mounting) 57.0 lbs (26 kg)
RET System Weight 5.0 lbs (2.25 kg)
Connector 6; 7-16 DIN female
Mounting Pole 2-5 inches (5-12 cm)

Antenna Patterns* Rear View Bottom View

713 MHz 1910 MHz

830 MHz
Elevation 2° Elevation 4°
Elevation 2°
Azimuth Azimuth
Azimuth

*Typical antenna patterns. For detail information on antenna pattern, please contact us at [email protected]. All specifications are subject to change without notice.

USA: 89 Leuning Street, South Hackensack, NJ 07606 Telephone: 201-342-3338

www.cciproducts.com Canada: 411 Legget Drive, Suite 104, Ottawa, ON Canada K2K 3C9 Telephone: 613-591-6696
8/22/2013 Page 2 Revision 1.1
 M65 Antenna Series

HYBRID MULTI BAND ANTENNA ARRAY

Model HBSA-M65-19R010-62

Ordering Information:
HBSA-M65-19R010-62 Antenna (6’), Hybrid Bi-Sector Array, Multi-band (700/800/850, and
1710/2360 ), with Factory Installed Actuator
M03 Top
HBSA-M65-19R010-62-K Complete Kit with Antenna, Factory Installed Actuators (3) and M03 Mounting Bracket
Mounting Bracket
BSA-RET200 RET Actuator

BSA-M03 Mounting Bracket (Top & Bottom) with 0° through 10° Mechanical tilt M03 Bottom
Adjustment Mounting Bracket

RET [Remote Electrical Tilt] System

General Specification Electrical Specification
Part Number BSA-RET200 Interface Signal Data | dc
Protocols AISG 2.0 Input Voltage Range 10-30 Vdc
Adjustment Cycles >10,000 cycles Current consumption during tilting 120mA at Vin = 24V
Tilt Accuracy ±0.1° Current consumption idle 55mA at Vin=24V
Temperature Range -40°C … +70°C Hardware Interface AISG - RS 485 A/B
Input Connector 1x8-pin Daisy Chain In Male
Output Connector 1x8-pin Daisy Chain Out Female

Mechanical Specification and Dimensions

Housing Material ASA / ABS / Aluminum

Dimensions (H x W x D) 8 x 5 x 2 inches (213 x 135 x 51 mm)
Weight 1.5 lbs (0.68 kg)

Standards Compliance
Safety EN 60950-1, UL 60950-1
Emission EN 55022
Immunity EN 55024
Environmental IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-5, IEC 60068-2-6, IEC 60068-2-11, IEC 60068-2-14,
IEC 60068-2-18, IEC 60068-2-27, IEC 60068-2-29, IEC 60068-2-30, IEC 60068-2-52, IEC 60068-2
-64, GR-63-CORE 4.3.1, EN60529 IP24

Regulatory Certification
AISG, FCC Part 15 Class B, CE, CSA US

USA: 89 Leuning Street, South Hackensack, NJ 07606 Telephone: 201-342-3338

www.cciproducts.com Canada: 411 Legget Drive, Suite 104, Ottawa, ON Canada K2K 3C9 Telephone: 613-591-6696

8/22/2013 Page 3 Revision 1.1