Scribd
Upload
42 views2 pages

Main Income Solenoid - 0404091 - ENG

The document summarizes the specifications of a 2/2-way solenoid valve that is normally closed. The valve uses a diaphragm and operates by applying pressure to open the valve when energized, requiring a minimum pressure differential of 0.1 bar to operate properly. It has brass and stainless steel construction and can handle pressures from 0.1 to 16 bar, temperatures from -10 to 90°C, and viscosities up to 12 cSt.

Uploaded by

nubaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views2 pages

Main Income Solenoid - 0404091 - ENG

The document summarizes the specifications of a 2/2-way solenoid valve that is normally closed. The valve uses a diaphragm and operates by applying pressure to open the valve when energized, requiring a minimum pressure differential of 0.1 bar to operate properly. It has brass and stainless steel construction and can handle pressures from 0.1 to 16 bar, temperatures from -10 to 90°C, and viscosities up to 12 cSt.

Uploaded by

nubaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2/2-Way Solenoidvalve T-Series

VALVE TYPE: PILOT OPERATED

Function : normally closed, NC


Construction : diaphgram
Pressure range : 0,1 - 16 bar max., see tabel
Material : brass with stainless steel inner parts
Seal : NBR standard, viton of EPDM optional
Ambient temp. : max. +35°C
Medium temp. : -10 upto +90°C
Viscosity : max. 12cSt / ~2°E
Supply voltage : 230/50, 24/50
24/=

Other voltages on request
Enclosure : Din 40050 / IP65
Medium : neutral, gaseous and liquid
Connection : 3/8 upto 1/2" BSP

Valve, non-energised, closed by spring power - NC. When energised, the pressure decomposes
on the secundary side of the piston. The pressure differential lifts the piston from the seat (orri-
fice) and the valve opens. There should always be a pressure differential, of at least 0,1 bar over
the valve, to secure unproblematic operation.

Conn. Orifice Flow-rate Typenumber Min. pressure Max. pressure (in bar) Power
BSP in mm l/min (in bar) AC Coil DC Coil in Watt
3/8" 12 35 0,1 20 10 8
1/2" 12 45 0,1 20 10 8

All technical specifications are given with best knowledge, no responsibility is accepted for the information stated!
Dimensional drawing standard type
(Dinmensions in mm)

Power consumption

Type Inrusch Hold

VA~ VA~

8 Watt 25 14,5

All technical specifications are given with best knowledge, no responsibility is accepted for the information stated!
Parts

Pos Description Code nr

1 Coil 8 watt 8 watt

2 Anchor complete R451284/B R451284/B

3 Tube complete R450938 R450938

4 Diaphragm compl. R450916/B R450916/B

You might also like