PMP 450m Access Point SPECIFICATION SHEET
PMP 450m Access Point
Cambium Networks industry-leading 450 platform adds
Multi-User MIMO capability with cnMedusa™ technology.
Key Features:
• cnMedusa™ technology enhances sector capacity by
combining a smart beamforming antenna array with
multiple RF transmit and receive chains, effectively
multiplying available capacity by more than three times.
• Multi-User MIMO more effectively uses available
spectrum by simultaneous transmissions to multiple
subscribers, increasing spectral efficiency to more than
40 bps/Hz.
• Protect your investment in the 450 platform equipment
by continuing to utilize existing Subscriber Modules
(both 450 and 450i SMs work with the 450m and
cnMedusa technology).
• Dramatically reduce the effect of interference with
smart beamforming
• SFP port allows for greater deployment flexibility, and
AUX port allows for connection of camera or other PoE
directly.
• The Limited Version can reduce capital investment until
additional capacity is actually required. A simple
license key can enable MU-MIMO operation when
needed.
PRODUCT
RoW US EU DES only IC
Model Numbers Integrated 90 degree sector C050045A101A C050045A102A C050045A103A C050045A104A C050045A105A
Limited Version C050045A111A C050045A112A C050045A113A C050045A114A C050045A115A
SPECTRUM
Channel Spacing Configurable to 2.5 MHz channel spacing
Frequency Range 5150-5925 MHz
Channel Width 5*, 10*, 15*, 20, 30* and 40 MHz*
© 2017 Cambium Networks Ltd. All rights reserved.
CN PMP450m AP 01112017
Specifications PMP 450m Access Point SPECIFICATION SHEET
INTERFACE
MAC (Media Access Control) Layer Cambium Networks proprietary
Physical Layer 14x14 Multi-User MIMO OFDM
Ethernet Interface 100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v3
VLAN 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
PERFORMANCE
Subscriber Per Sector Up to 238
ARQ Yes
Modulation Levels (Adaptive) MCS Signal to Noise Required (SNR, in dB)
2X QPSK 10
4X 16QAM 17
6X 64QAM 24
8X 256QAM 32
Maximum Deployment Range Up to 40 miles (64 km)
Latency 10 ms, typical
Yes, via Autosync (CMM5 or UGPS)
Quality of Service Diffserv QoS
LINK BUDGET
90° integrated sector (dual polarity, H+V)
Antenna Beam Width (Elevation) 2° Electrical Downtilt, 8° Elevation (with Null Fill)
PHYSICAL
Antenna Connection Integrated Sector Array
EN61000-4-5: 1.2us/50us, 500 V voltage waveform
Recommended external surge suppressor: Cambium Networks Model # C000065L007A
Mean Time Between Failure > 40 Years
Environmental IP67, IP66
Temperature / Humidity -40°C to +60°C (-40°F to +140°F), 0-95% non-condensing
Weight Approx. 14.2 kg (31 bs)
460 N
700 N
Dimensions (HxWxD) 52 x 65 x 11 cm (20.3” x 25.7” x 4.4”)
Power Consumption 70 W typical, 80 W peak (up to 110 W max with AUX port PoE enabled)
Input Voltage 42.5-59 V DC
Mounting Pole mount with included brackets
CN PMP450m AP 11292016
Specifications PMP 450m Access Point SPECIFICATION SHEET
SECURITY
Encryption 56-bit DES, FIPS-197 128-bit AES
CERTIFICATIONS
109W-50450M (5.1*, 5.2*, 5.4, 5.8 GHz)
FCC ID QWP-50450M (5.1*, 5.2*, 5.4, 5.8 GHz)
CE EN 301 893 v1.8.1 (5.4GHz)
EN 302 502 v1.2.1 (5.8 GHz)
* Indicates Future Software Release
© 2017 Cambium Networks Ltd. All rights reserved.
CN PMP450m AP 01112017
