Scribd
Upload
137 views1 page

Adaptors and Reducers Type: 476: Accessories

This document provides information on adaptors and reducers for use in hazardous locations. It lists various thread sizes that can be used with adaptors and reducers. The adaptors and reducers are certified to ATEX standards and are available in brass, stainless steel, or aluminum. They provide a means to connect equipment with mismatched thread sizes and are suitable for use in explosive gas atmospheres. Installation instructions and ordering information are also included.

Uploaded by

balbeloanna7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
137 views1 page

Adaptors and Reducers Type: 476: Accessories

This document provides information on adaptors and reducers for use in hazardous locations. It lists various thread sizes that can be used with adaptors and reducers. The adaptors and reducers are certified to ATEX standards and are available in brass, stainless steel, or aluminum. They provide a means to connect equipment with mismatched thread sizes and are suitable for use in explosive gas atmospheres. Installation instructions and ordering information are also included.

Uploaded by

balbeloanna7
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Adaptors and Accessories

120 Reducers Type: 476


Flameproof Exd & Increased Safety
Exe Certified ATEX

Adaptor Reducer

ADAPTOR AND REDUCERS SELECTION TABLE


Adaptor Male Thread

Reducer Metric NPT *


M16 M20 M25 M32 M40 M50 M63 M75 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3"
M16
M20
M25
Metric

M32
M40
M50
Female Thread

M63
M75

1/2"
3/4"

1"
11/4"
NPT *

11/2"
2"
21/2"
3"

All dimensions in millimetres (except * where dimensions are in inches). All metric threads are 1.5mm pitch as standard.

Application Features
• Provides a means of connection between the equipment and • Manufactured in Brass (standard), Nickel Plated Brass,
cable glands with dissimilar thread sizes or types. 316 Stainless Steel or (Aluminium) - none mining only.
• See technical section for installation rules and regulations. • Brass NPT entries are nickel plated as standard.
Technical Data Group I • Available for both Group I & Group II applications.
• Flameproof & Increased Safety Technical Data Group II
Exde I M2. • Flameproof & Increased Safety
• Certificate No’s: Sira 06ATEX1240U. Exde IIC II 2 GD IP66.
• Suitable for use in Mines. • Certificate No’s: Sira 06ATEX1240U.
• Construction and Test Standards: IEC/EN 60079-0, • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22
IEC/EN 60079-1 and IEC/EN 60079-7. and in Gas Groups IIA, IIB and IIC.
• Ingress Protection: IP66. • Construction and Test Standards: IEC/EN 60079-0,
• Operating Temperature: IEC/EN 60079-1 and IEC/EN 60079-7.
a) Standard Product - Without O-Ring #tted: - 60°C to +160°C • Ingress Protection: IP66.
b) Optional Nitrile O-Ring #tted: - 60°C to +80°C • Operating Temperature:
c) Optional Silicon O-Ring #tted: - 60°C to +160°C a) Standard Product - Without O-Ring #tted: - 60°C to +160°C
• Assembly Instruction Sheet: AI 377. b) Optional Nitrile O-Ring #tted: - 60°C to +80°C
• Alternative certification options available: c) Optional Silicon O-Ring #tted: - 60°C to +160°C
GOST R-Exe IIU • Assembly Instruction Sheet: AI 377.
Ordering Information Format for ordering as follows: Ordering Information Format for ordering as follows:
Adaptor Type Male Thread Female Thread Adaptor Type Male Thread Female Thread
M476/1A M32 M40 476/1A M32 M40
Reducer Type Male Thread Female Thread Reducer Type Male Thread Female Thread
M476/1 M32 3/4" 476/1 M32 3/4"

Connection Solutions
www.ehawke.com UPD190918

You might also like