INF-AP-QUA-ITP-05 Rev

Inspection & Testing Plan for Asphalt Mixtures 02 Date 21.04.2018

Testing
Parameter Base Course (Class A) Base Course (Class B) Wearing Course Test Method Testing Frequency INF AP LAB TPL
Description Job Mix Tolerences
Agg retained on ≥4.75mm ±5% ±4% ±4%
ASTM D5444
Agg passing 4.75mm ±4% ±3% ±3%
Agg passing 850 µm ±3% ±2% ±2%
ASTM C117 Each Source a
Agg passing75 µm ±1.5% ±1.0% ±1.0%
Binder Content ±0.3% ±0.2% ±0.2% ASTM D2172
Stability, kN ≥ 9.5 ≥ 9.5 ≥ 11.5 Visible Changes in
Flow, mm 2 to 4 ASTM D6927 Material
ASTM D5581
Marshall Quotient
(Stability/ Flow), kN/mm ≥ 4.75
1 Test Daily
Voids Filled with Asphalt, ASTM C127
% 50 to 70 50 to 75
ASTM C128
ASTM D2726 ASTM OCL
Filler/ Binder Ratio 0.8 to 1.5 0.75 to 1.35 D1188 Level A- 1 Test/ 250 ton
Level B- 1 Test/ 200 ton
a
Voids in Marshall Specimen at ASTM D2172
400 Blows per Face at Optimum 3.2 min. 3.4 min. 4.0 min. Level C- 1 Test/ 100 ton
Marshall Properties/ Binder Content, % ASTM C136
Marshall Mix Design ASTM D6927
Bulk Specific Gravity of
Marshall Specimen ± 1% of JMF ASTM D6926
ASTM D5581
ASTM D2041
Retained Stability, % ≥ 75 ASTM D2726 ASTM 1 test per 3000 ton
D1188
Temperature of
Bituminous Mixture ± 10oC of JMF Temperature in Truck BS EN 12697-13 Every Truck a
VMA, % Minimum VMA, %
Visible Changes in
Nominal Maximum Material
Particle size, mm Design Air Voids, %

1.18 21.5 22.5 23.5 1 Test Daily

2.36 19.0 20.0 21.0
ASTM D2041
4.75 16.0 17.0 18.0
9.5 14.0 15.0 16.0
ASTM D2726
D1188
ASTM a
OCL
12.5 13.0 14.0 15.0 Level A- 1 Test/ 250 ton
Level B- 1 Test/ 200 ton
19.0 12.0 13.0 14.0 Level C- 1 Test/ 100 ton
25.0 11.0 12.0 13.0
Air Voids, % 4 to 8 4.5 to 8 5 to 8
ITP Name Position Date
Prepared By Jerin Sam Kurian QA/QC Inspector

INF-AP-QUA-SF-ITP-05-01 Rev 0 Date: 15.03.2018

 Reviewed By Alfredo Marques QA/QC Manager
Approved By Alfredo Marques QA/QC Manager

INF-AP-QUA-SF-ITP-05-01 Rev 0 Date: 15.03.2018