COMMERCIAL
SULTAN IP65 LED CORROSION PROOF
This compact range of corrosion-proof fittings are available in common lengths of 1.2m,1.5m and 1.8m, and for site
applications, 0.6m & 1.2m with yellow base. With a modern aesthetic they utilise high quality LED’s with a rated LED
life of 50,000 hours and provide similar mechanical performance to traditional corrosion proofs whilst providing
significant energy savings and long service life, without the high labour costs associated with traditional tube changes
Applications:
• Wet areas
• Outside walkways
• Warehouses
• Storage areas
• Industrial units
• Farm buildings (Non-corrosive atmosphere)
• Garages
• Workshops
• Car parks
• Changing rooms
Construction:
Grey coloured polycarbonate body
Opal polycarbonate diffuser
Stainless steel clips
Steel gear tray
Features: Benefits:
• Full range of lengths, wattages and lumen packages • Provides a solution for all applications
• 0.6m & 1.2m yellow base versions with 110-240v driver • Ideal for transformer/site use
• Slim rounded design • Attractive aesthetic for less industrial looking requirements
• Polycarbonate base & frosted diffuser with rubber seal • Flexible so will not crack when mounted on uneven surfaces
• Provides ingress protection against dust and water jets
• Will not corrode so provides long life
• Provides excellent light uniformity with less glare
• Grade 304 stainless steel diffuser clips • Non-rusting closure and mounting system
• Utilises high quality long life surface mount LED technology • Compared to T8 fluorescent:
for: • Comparable light output so is a one for one replacement
• Outstanding light output of lumens • Makes energy savings of around 50%
• Very low power consumption • Light output and colour is consistent over life
• Long rated LED life • No maintenance cost for replacement tubes over life
• Excellent efficacy providing compliance with current &
foreseeable legislation
• Colour temperature of 5000K with high CRI • Ideal light colour for security whilst providing clear task visibility
• Uses a dedicated LED plate held in place by spring clips • Better solution than LED tubes which provide up to 30% less
light and are prone to theft
• Rugged solid-state lighting technology with no heat filaments • Less susceptible to failure due to building vibration caused by
or electrodes to fail traffic or hot/cold temperature variations
• “Instant on” so can be switched by microwave, PIR and/or
photocell which is detrimental to traditional light sources
• Provides even greater energy savings when lighting not required
• Emergency option • Provides light on power failure to safely evacuate the area
• End mount sensor option • Provides additional energy savings when lighting is not required
• Stainless steel surface mounting brackets and suspension • Provides direct surface or chain suspension option
hangers included • Ideal for apex or sloping ceiling/roof designs
• Gland entry points at both ends and base • Most conduit electrical infrastructures are catered for
COMMERCIAL
SULTAN IP65 LED CORROSION PROOF
Product Code: RSUF242FT-09 RSUF244FT-09 RSUF244FT-24 RSUF484FT-24 RSUF405FT-24 RSUF805FT-24 RSUF486FT-24 RSUF966FT-24
Comparable to: 2x18W T8 1x36W T8 1x36W T8 2x36W T8 1x58W T8 2x58W T8 1x70W T8 2x70W T8
Total Power (W): Fluorescent
25.0 Fluorescent
23.1 Fluorescent
22.9 Fluorescent
45.4 Fluorescent
40.2 Fluorescent
77.9 47.3 91.3
Total Light Output (lm): 2650 2780 2860 5600 4440 8260 6270 11610
Efficacy (lm / cctW): 106 121 126 124 111 106 133 127
Rated Life (hrs): 50,000 50,000 50,000 50,000 50,000 50,000 50,000 50,000
Warranty (yrs): 3 3 3 3 3 3 3 3
Illuminance at 1m (lux): 910 960 990 1790 1410 2560 2090 3880
Beam Angle (deg): 120 120 120 120 120 120 120 120
CCT (K): 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000
CRI (Ra): 80 80 80 80 80 80 80 80
Ingress Protection (IP): 65 65 65 65 65 65 65 65
Impact Rating (IK): 08 08 08 08 08 08 08 08
Operating Temperature (˚C): -25 ≥ +40 -25 ≥ +40 -25 ≥ +40 -25 ≥ +40 -25 ≥ +40 -25 ≥ +40 -25 ≥ +40 -25 ≥ +40
Output Current (mA): 600 600 600 1200 1000 2000 1200 1200
Operating Voltage (Vac): 110 110 220-240 220-240 220-240 220-240 220-240 220-240
Power Factor (PF): 0.9 0.9 0.95 0.97 0.97 0.97 0.97 0.97
Length (mm): 660 1258 1258 1258 1530 1530 1800 1800
Width (mm): 85 85 85 103 85 103 85 103
Height (mm): 77 77 77 77 77 77 77 77
Box Qty: 1 1 1 1 1 1 1 1
Weight (kg): 0.95 1.32 1.32 1.54 1.6 2 1.8 2.15
Accessories:
RVUFxxxFT-xxE 3-hour Emergency option (Min ambient ≥ -100C)
Add “E” suffix to the end of product code
R360PIR-01 PIR sensor for linear fittings (See separate data
sheet for functionality with non-dimmable or
dimmable driver options through conversions)
R360RC-01 Remote control/programmer for PIR sensor
Standards & Approvals:
Complies with: EN 60598-1, EN 60598-2-1, EN 62471, EN 62493,
EN 55015, EN 61000-3-2, EN 610003-3, EN 61547
Cone Illuminance Diagram:
Luminous Intensity Distribution Diagram:
Diagram for RSUF405FT-24 in 5,000K. Other diagrams available on request Diagram for RSUF405FT-24 in 5,000K. Other diagrams available on request
